What are renewable resources?
They are resources that are in limited supply, but they can replenish themselves quickly.
They are resources that are in abundant supply and can replenish themselves quickly.
They are resources that are in limited supply and that take a long time to create.
They are resources that are in abundant supply but take a long time to create.
Answer:
B: They are resources that are in abundant supply and can replenish themselves quickly.
Explanation:
A renewable resource is one that can be used repeatedly and does not run out because it is naturally replaced. Examples of renewable resources include solar, wind, hydro, geothermal, and biomass energy.
Calculate the volume of hydrogen that combines with 12 cm³ of chlorine gas to form hydrogen chloride.The games react at the same temperature and pressure
Answer:12 cm^3 becoz as per Gay-Lussac law
H2+Cl2---. 2HCl thus ratio is 1:1:2
Explanation:
The volume of hydrogen gas that combines with 12 cm³ of chlorine gas to form hydrogen chloride is 12 cm³.
To calculate the volume of hydrogen gas that combines with 12 cm³ of chlorine gas to form hydrogen chloride, we need to determine the stoichiometric ratio of the reactants based on their balanced chemical equation. The balanced equation for the formation of hydrogen chloride (HCl) is:
H₂ + Cl₂ → 2HCl
From the balanced equation, we can see that one molecule of hydrogen gas (H₂) reacts with one molecule of chlorine gas (Cl₂) to form two molecules of hydrogen chloride (2HCl).
Given that the volume of chlorine gas is 12 cm³, the volume of hydrogen gas required to react with it can be calculated as follows:
Volume of hydrogen gas = (Volume of chlorine gas) / (Stoichiometric ratio of hydrogen in the balanced equation)
Volume of hydrogen gas = 12 cm³ / 1 = 12 cm³
Therefore, the volume of hydrogen gas that combines with 12 cm³ of chlorine gas to form hydrogen chloride is 12 cm³.
Learn more about volume from the link given below.
https://brainly.com/question/33501668
#SPJ2
6. Calculate the molarity of an aqueous sodium chloride solution containing 284 g of NaCl in 2.20 L of solution. Calculate the molarity of the chloride in the solution.
The molarity of sodium chloride solution containing 284 g of NaCl in 2.20 L os solution would be 2.21 mole/Liter
MolarityRecall that:
Molarity = mole/volume
Also, Mole = mass/molar mass
Thus:
Mole of 284 g NaCl = 284/58.44 = 4.86 moles
Volume of the solution = 2.20 L
Therefore, the molarity of the solution can be calculated as;
molarity = 4.86/2.20 = 2.21 mole/Liter
More on molarity can be found here: https://brainly.com/question/2817451
#SPJ1
In Beaker A, 2.0 grams of zinc powder is mixed with 1.0 M hydrochloric acid. In Beaker B, 2.0 grams of zinc powder is mixed with 6.0 M hydrochloric acid. In which beaker will the reaction occur faster
In Beaker A, 2.0 grams of zinc powder is mixed with 1.0 M HCl acid & in Beaker B, 2.0 grams of zinc powder is mixed with 6.0 M HCl acid so in beaker B reaction occur faster.
What is rate of reaction?Rate of reaction of any chemical reaction gives idea about the speed of the completion of the given reaction, and rate of reaction is directly proportional to the concentration of the reactant species.
If the concentration of reactants increases then the rate of the reaction also increases. According to the question concentration of zinc powder is same in both beakers.
In beaker A, concentration of HCl is 1M and in Beaker B is 6M respectively so the rate of reaction is faster in beaker B.
Hence in beaker B reaction occur faster.
To know more about rate of reaction, visit the below link:
https://brainly.com/question/7578129
#SPJ1
Assume that adhesin gene of Neisseria gonorrhoeae, the pathogen that causes gonorrhea, were mutated. What is the most likely effect that this would have on the pathogen?
the pathogen will be unable to produce toxins.
the pathogen will be unable to attach to host cells
the pathogen will be unable to replicate
the pathoger
will be unable to gain entry into the host.
When the adhesin gene of Neisseria gonorrhoeae were mutated, the pathogen will be unable to attach to the host cells.
What do you mean by Pathogens?Pathogens may be defined as disease-causing agents. These are mostly microorganisms that infect the body of animals as well as humans.
Adhesin gene plays a very vital role in the attachment of pathogens to the host cells. It is the site where pathogen attack and attaches to host cells and then enters the body to play their function i.e. replication, a decline in the host immune system, and finally disease caused.
Therefore, when the adhesin gene of Neisseria gonorrhoeae were mutated, the pathogen will be unable to attach to the host cells.
To learn more about Pathogens, refer to the link:
https://brainly.com/question/1008643
#SPJ1
What is one reaction that will form an arrhenius base?.
Answer:
An alkaline solution is another name for a solution that is basic. All alkali metals react readily with water to produce the metal hydroxide and hydrogen gas. The resulting solutions are basic.
An alkaline solution is another name for a solution that is base. All alkali metals react readily with water to produce the metal hydroxide and hydrogen gas. The resulting solutions are basic.
What is base?According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.
Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.
They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.
Learn more about base,here:
https://brainly.com/question/13773045
#SPJ2
Which form of decay produces a nucleus similar to the element helium? alpha particle beta particle gamma ray
Answer:
ALPHA
Explanation:
What thermodynamic quantities are used to define Gibbs free energy?
help me with this plssss
Answer:
5=D
6=B
7=A
8=?????
1A= conduction
1B= radiation
1C= convection
3: C
4: A
Explanation:
2: The heat from the hot water is been transferred along the metal handle to the other end of the spoon by the process of CONDUCTION.
What is obtained when (S)-2-butanol is treated with tosyl chloride and pyridine, followed by exposure to bromide
When (S)-2-butanol is treated with tosyl chloride and pyridine, followed by exposure to bromide, (R)-2-bromobutane is formed.
What is inversion of configuration?A substance may undergo inversion of configuration during nucleophilic substitution when the leaving group is bulky such that attack must occcur at the reverse side.
Hence, when (S)-2-butanol is treated with tosyl chloride and pyridine, followed by exposure to bromide, (R)-2-bromobutane is formed.
Learn more about inversion of configuration:https://brainly.com/question/14150949
Does anyone know Bible thing cuz I don’t know what to write and I need help if you know this ok
I answered all of them except 2 for you to do
Hope this helps :))
if the pH of a solution is 7, what is the pOH?
If the pH of a solution is 7, the pOH of the solution will be 7.
What is pOH?The concentration of the hydroxide ion (OH-) in a solution is measured by pOH.
This is a fundamental equation to calculate the pH and pOH.
pOH = 14 - ph
The pH is given 7
Putting the value of pH in the formula
pOH = 14 - 7 = 7
Thus, the pOH will be 7, if the pH of a solution is 7.
Learn more about pOH
https://brainly.com/question/17144456
#SPJ1
The reason for the concentration of smelters, refineries, and foundries close to northern Belgium's copper mines is that copper production is:
There is a concentration of smelters, refineries, and foundries close to northern Belgium's copper mines because copper production is a bulk-reducing industry.
What is a bulk-reducing industry?A bulk-reducing industry can be defined as a type of industry in which the raw materials (inputs) that are used for production weighs more than the finished good or final product.
This ultimately implies that, a bulk-reducing industry such as copper mines are established close to smelters, refineries, and foundries because they make use of raw materials that weigh more than the finished good or final product.
Read more on bulk-reducing industry here: https://brainly.com/question/26779067
Brain controls __________ and ________ activity
Answer:
Brain controls all body parts or processess like thinking and our movements or physical activity.
Explanation:
The control center of the body is the nervous system. It directs the other body systems. It controls, monitors, and coordinates all body parts and processes. It also receives information from the environment and makes specific body parts acts on that information. The nervous system is made up of brain, the spinal cord, and the nerves.
Hi brainly user! In the picture are the Parts of a brain. Actually, this is what I drew before ^^
The bond length of a covalent bond is the distance between the nuclei of two bonded atoms. The larger the atoms, the _____ this distance will be. Bond length therefore _____ as atomic size decreases.
Answer:
Bonding;lone
Explanation:
Consider the following compounds: H2S, H2Se, H2Te. The molecule with the highest boiling point is _____, while the molecule with the highest vapor pressure is _____.
The molecule with the highest boiling point is H₂Te, while the molecule with the highest vapor pressure is H₂S.
What is the realation between boiling point and vapor pressure?Boiling point of any substnace is inverely proportional to its vapour pressure, and boilig point is directly proportional to the molecular mass of the substance.
In the given compounds H₂S, H₂Se and H₂Te molecular mass of Te is high and of Sulphur (S) is small. So the boiling point of H₂Te is highest and of H₂S is low so the vapor pressure of H₂S is highest.
Hence, H₂Te has the highest boiling point and H₂S has the highest vapor pressure.
To know more about boiling point, visit the below link:
https://brainly.com/question/25124313
#SPJ1
Which best describes why a liquid needs a container when a solid does not?
Solids fill their containers, and liquids have definite shapes.
Solids have definite shapes, and liquids fill their containers.
Solids particles will expand to fill their containers, and liquid particles will expand as well.
Solids particles expand to fill their containers, and liquid particles do not.
Answer:
The second option
Explanation:
The process of elimiation.
1. We know liquids dont have a definite shape, they will morph into whatever enviroment theyre in
3. Solids dont expand based on what container theyre in, they either dont fit or they do
4. We know that liquid expands, so we can also rule this one out.
Which leaves us with option 2 to be correct.
2) What is the change in enthalpy when 3.400 moles of aluminum react with excess ammonium nitrate (NH4NO3)
according to the equation? Is the reaction exothermic or endothermic?
2AI + 3NHANO3 → 3N2+ 6 H2O + Al2O3
AH = -2030kJ
Answer: See below
Explanation:
(i) 2AI + 3 NHANO3 → 3 N2+ 6 H2O + Al2O3 ΔH = -2030kJ
From stoichiometric coefiicients, it can be seen that:
When 2 moles of Al react, change in enthalpy = -2030kJ
So, when 3.4 moles of Al react, change in enthalpy = -(2030/2) x 3.4 kJ = -3451 kJ
Therefore, the change in enthalpy is -3451 kJ
(ii) The change in enthalpy is negative. This means heat is released during the reaction.
So the reaction is exothermic
The enthalpy change with the reaction of 3.4 moles of aluminum in the reaction is -3045 kJ. The reaction is exothermic in nature.
What is an exothermic and endothermic reaction?The reaction in which the energy is released and the value of change in enthalpy is negative is an exothermic reaction. The reaction in which the energy is absorbed with the positive value of change in enthalpy.
For a balanced chemical reaction, for 2 moles of Aluminum reaction, the change in enthalpy has been -2030 kJ. The change in enthalpy for the reaction of 3.4 moles of aluminum is given as:
[tex]\rm 2\;mol\;Al=-2030 \;kJ\\\\3.4\;mol\;Al=\dfrac{-2030}{2}\;\times\;3\;kJ\\\\ 3.4\;mol\;Al=-3045\;kJ[/tex]
The change in enthalpy for 3.4 moles of aluminum reaction is -3045 kJ. The reaction is exothermic in nature.
Learn more about exothermic reaction, here:
https://brainly.com/question/10373907
which sublevel would have electrons with the highest energy? A) 5s B) 4s C) 4d D) 4p
The sublevel would have electrons with the highest energy is 4p. Therefore, option D is correct.
What is an electron ?The elementary electric charge of the electron is a negative one, making it a subatomic particle. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically regarded to be elementary particles.
The smallest elemental component of an atom, the electron has a negative charge. In a neutral atom, there are an equal number of protons and electrons. One electron and one proton are all that the hydrogen atom has.
The words electric and ion are combined to form the word electron. In turn, electron is derived from the suffix -on, which is currently used to describe other subatomic particles, such as a proton or neutron.
Thus, option D is correct.
To learn more about an electron, follow the link;
https://brainly.com/question/1255220
#SPJ2
Which most closely represents the structure of an element?
A. silver beads
B silver and gold beads
C. gold beads and ornaments
D. silver and gold beads and ornaments
Answer:
C. gold beads and ornaments
Explanation:
Saturated and Unsaturated Solutions Is there a limit to the amount of solute that will dissolve in a solvent? We use solutions every day. People who wear contact lenses use "lens solution" to rinse their contacts and keep them wet. Athletes who consume sports drinks after exercising benefit from the electrolytes in those solutions. This activity will explore whether or not there is a limit to how much of one substance can dis- solve in another
Answer:
Explanation:
The reaction below was carried out in an acidic solution. upper i minus, plus upper i upper o minus subscript 3 right arrow upper i subscript 2. which statement is true about this equation? although it is unbalanced, it can be balanced by using the half-reaction method. it has been balanced by using the half-reaction method. it has been balanced by directly using spectator ions. although it is unbalanced, it can be balanced by directly using spectator ions.
The reaction is an unbalanced redox reaction hence, the reaction can be balanced by using the half-reaction method.
What is a redox reaction?The term redox reaction refers to the reactionnin which electrons are transferred hence one specie is oxidized while the other specie is reduced.
Looking at the reation as shown, we can see that the reaction is an unbalanced redox reaction hence, the reaction can be balanced by using the half-reaction method.
Learn more about redox reaction: https://brainly.com/question/13293425
#SPJ4
Answer:
B
Explanation:
Define Exothermic and Endothermic reaction.
I need to solve this quickly!
Answer:
to create or make energy Storage molecules
how is chemistry used daily for gynecologist? examples
Answer:
Chemistry plays a large role in obstetrics and gynecology. For instance, urinalysis requires an understanding of bilirubin levels and their conjugation with glucuronic acid to create a compound that is water soluble. This is passed through the blood stream and urinary system to create urobilirubin.
Explanation:
Question 16 of 25
When the maximum amount of solid is dissolved in a solute, what kind of
solution is it?
1. Why is it a problem that most black-footed ferrets today are closely related?
A. They can no longer reproduce
B. They are more likely to get sick from the same diseases
C. They can be raised only in captivity
D. They no longer know how to hunt on their own
PLS HELP ASAP!!!
Answer:
they are more likely to get sick from the same disease
Black-footed ferrets are the most endangered mammal of North America. The problem that most black-footed ferrets today are closely related because they are more likely to get sick from the same diseases.
What are endangered species?An endangered species are the species that can become extinct in the future, either worldwide.
The problem of the black-footed ferrets today are closely related is that they are more likely to get sick from the same diseases.
Thus, the correct option is C.
For more details regarding endangered species, visit:
https://brainly.com/question/10415903
#SPJ2
An ideal gas has a volume of 18.25 L at a temperature of 15.9 °C. The temperature of the gas is raised to 40.7 °C while the number of moles and the pressure of the gas are kept constant. What is the new volume of the gas (in L)?
B: An ideal gas has a volume of 10.8 L at a temperature of 25.0 °C and a pressure of 60 atm. The pressure of the gas is reduced to 370.0 mmHg, but the temperature and number of moles of the gas are kept constant. What is the new volume of the gas (in L)?
Answer:
V₂ = V₁ / T₁ * T₂ . If you prefer to set the final volume and want to estimate the resulting temperature, then the equation of Charles' law changes to: T2=T1/T1 multiplied by v^2.
How can energy change during a chemical reaction?
A. Change in the mass of the reactants or thermal energy.
B. Increase in heat and/or destruction of matter.
C. Transfer of heat and/or work.
D. Increase or decrease in total energy of a system.
Answer:
I think the answer would be C because energy is only transferred.
Explanation:
Hope this helps:)....if it's wrong then sorry for wasting your time and may God bless you:)
Can someone please help me? :((
Answer:
I belive its d, not fully sure tho