TLC means Thin Layer Chromatography. It is a method that can best be described as "Affinity-Based" used in the separation of compounds that are in a mixture.
What is unreacted p-nitrobenzaldehyde?Unreacted p-nitrobenzaldehyde is simply an organic aromatic compound that contains a nitro group para-substituted to an aldehyde. in this case, if it is unreacted, that means it is the same as before the chemical reation.
Note that the question is missing key information hence the general answer.
Learn more about TCL at:
https://brainly.com/question/10296715
Which is composed of aromatic hydrocarbons?
An example of The substance which is composed of aromatic hydrocarbins is : Pain reliever.
Aromatic hydrocarbonsAromatic hydrocarbons are hydrocarbons in nature are composed of 6 rings of carbn atoms ( fused benzene rings ) certain compounds like petroluem contain aromatic hydrocarbons in nature. Certain medical drugs administered are composed of aromatic hydrocarbins an example of such drugs are pain relievers.
Hence we can conclude that the substance which is composed of aromatic hydrocarbons is pain reiever.
Learn more about aromatic hydrocarbons: https://brainly.com/question/22599756
#SPJ1
The freezing point of pure benzene (C₆H₆) is 5. 49 °C. The freezing point of a solution made using toluene (C₇H₈) in benzene is determined to be -13. 0 °C. What is the molality of the toluene? (Kf benzene = 5. 12 °C/m)
The molality of the toluene is 1.46 mol/kg.
What is molality?The molality of a solution is its molal concentration. Molal concentration is denoted by m. It is the mol of solute dissolves in 1 Kg solvent.
The depression at freezing point is directly proportional to the molality of the solution. The equation we use for this type of problem is:
ΔT=iKm [tex]f_m[/tex]
Where, ΔT [tex]f_m[/tex] is depression at freezing point, i is Van't hoff factor, m is molality and [tex]K_f[/tex] is the freezing point depression constant.
Toluene is a non-electrolyte and so the value of i for this is 1.
Depression at a freezing point is given as -13.[tex]0^0[/tex] and the [tex]K_f[/tex] is given as 5.12. So, we could calculate the molality of the solution using the equation written above.
Let's plug in the values in the equation:
ΔT=iKm[tex]f_m[/tex]
-7.51 =1 x5. 12 xm
m = [tex]\frac{7.51}{5. 12}[/tex]
m = 1.46 m
It means the molality of the solution is 1.46 mol/kg.
Hence, the molality of the solution is 1.46 mol/kg.
Learn more about the molality of the solution here:
https://brainly.com/question/12123356
#SPJ1
in an ion, the number of electrons is _____ to the number of protons
Answer:
more/less depending on if it lost or gained electrons during the ionic bond process
Who is credited with arranging the periodic table?.
Answer
Dmitri Mendeleev Explanation:The modern periodic tables is credited primarily to the russian chemist Dmitri Mendeleev. Mendeleev's table is based on the periodic law, which states that when elements are arranged in order of increasing mass, their properties recur periodically.
One of the properties that makes copper, Cu, useful for household wiring is its ability to conduct electricity. Which other element is most likely to conduct electricity?
A. Radon, Rn
B. Nitrogen, N
C. Bromine, Br
D. Gold, Au
Answer:D) Gold, Au
Explanation:
Metals are conductive because of their free electrons. Gold is highly conductive.
Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number. Therefore the correct option is option D
What are metals?Metals are those elements which is hard, conduct electricity, ductile, lustrous and malleable. Since metals have free electrons that's why they can conduct electricity
A. Radon, Rn is an radioactive element so it is not metal so it can not conduct electricity
B. Nitrogen, N is an non metals hence it can not conduct electricity
C. Bromine, Br is also non metals so it can not conduct electricity
D. Gold, Au is a metals hence it can conduct electricity
Thus conducting electricity well is the properties of Gold is used in the household wiring. Therefore the correct option is option D
Learn more about the metals, here:
https://brainly.com/question/27859211
#SPJ5
Giving brainliest, please HELP!
Answer:
Third choice
Explanation:
From the graph.....more heat is required to change from Liquid to a gas than is required to change from a solid to a liquid ( see how the flat line portion is longer?)
A video-disc player that is not playing still uses 6.0 W of power. What is the
current into the video-disc player if it is plugged into a standard 120-V outlet?
Answer: 0.05 A
Explanation:
Hope this helps!
A video-disc player that is not playing still uses 6.0 W of power. The current is 0.05 A.
What is Power?
The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Power is related to other factors; for instance, the power required to move a ground vehicle is equal to the product of the vehicle's velocity, traction force on its wheels, and aerodynamic drag.
A motor's output power is calculated by multiplying its torque output by the angular velocity of its output shaft. Similar to how the power expended in an electrical component of a circuit is the result of the current.
Therefore, A video-disc player that is not playing still uses 6.0 W of power. The current is 0.05 A.
To learn more about Power, refer to the link:
https://brainly.com/question/29575208
#SPJ1
An electrophoretic separation of lactate dehydrogenase isoenzyme that demonstrates elevation in LD-1 greater than LD-2 could be indicative of:
An electrophoretic separation of lactate dehydrogenase isoenzyme that demonstrates elevation in LD-1 greater than LD-2 could be indicative of Hemolysis.
What is Hemolysis?Hemolysis is a process (generally natural process) associated with the elimination of red blood cells.
Hemolysis can be defined as the removal of erythrocytes due to internal or external environmental factors.
Hemolysis can be discovered by analyzing (or counting) the number of certain proteins in plasma.
Learn more about Hemolysis here:
https://brainly.com/question/24939518
Help please will give 20 points.Which stage of metamorphosis starts when a caterpillar egg hatches? a Adult b Larva c Nymph d Pupa
Answer:
The answer is B a larva
Explanation:
Answer:
B. Larva
Explanation:
it is when a catipliar hatches
In a thermonuclear device, the volume is 0.05L of gas and a pressure
of 4.0x106 atm. When the bomb goes off, it relases a gas into the
atmosphere at 1.0 atm, what is the volume of the gas after the
explosion?
Answer:
2 x 10^5 liters
Explanation:
P1V1 = P2 V2
P1V1 / P2 = V2 = .05 *4 x 10^6 / 1 = .2 x 10^6 liters
The heat capacity of an object depends in part on its__
Answer:
It depends on its mass and its chemical composition. Give me Brainiliest
what is the freezing point in c of a 1.56m aqueous solution of cacl2? round to 3 decimal places.
what is the industrial application of nitrogen monoxide
Answer:
it can be in the production of nitric acid
Answer:
Explanation:
Nitrogen oxides are used in the production of nitric acid, lacquers, dyes, and other chemicals. Nitrogen oxides are also used in rocket fuels, nitration of organic chemicals, and the manufacture of explosives.
A sample of gas has an initial volume of 3.62 L at a pressure of 0.987 atm. If the volume of the gas decreases to 2.50 L, what will the pressure be
Answer: 1.43 atm
Explanation:
What is the difference between natural and artificial radioactivity?
What is the difference between natural and artificial radioactivity?
Natural radioactivity comes from elements in nature. Artificial radioactivity comes from elements created in nuclear reactors and accelerators.
Answer:
natural is made from grass and artificial is made from toxic gas
Explanation:
yes
Are two atoms of the same element identical?
Answer:
No It is not
Two of the same atoms are most likely not identical
-
1. N2 + 3H2 → 2NH3
If you form 5.24 moles of NH3 from the above reaction, how many moles of N2 were
present at the start of the reaction?
Answer: 2.62 moles
Explanation:
For every 2 moles of ammonia that are produced, 1 mole of nitrogen is consumed.
This means that if 5.24 moles of ammonia are produced, 5.24/2=2.62 moles of nitrogen are consumed.
A 33.6 mL solution of KCl has a mass of 27.29 g. After evaporating to dryness, the dry salt residues has a mass of 6.31 g. Calculate the following: a. %m/m b. Molarity (M)
For the molarity and the percentage of the mass of kcl are mathematically given as
%m/m = 23.1%, molarity = 3.38M
What is the molarity?
Generally, the equation for the percentage of the mass of kcl is mathematically given as
(mass of kcl/mass of solution)x 100
therefore
%m/m = (6.31/27.29)x100
%m/m = 23.1%
The molarity
(no of mol/ vol of sol)
molarity = 0.0846mol/0.0250 L
molarity = 3.38M
In conclusion, the molarity is given as
molarity = 3.38M
Read more about Molarity
https://brainly.com/question/9149034
Which ion is formed when an atom of fluorine (f) gains one electron? f–1 f–2 f 1 f 2
Answer:
If a fluorine atom gains an electron, it becomes a fluoride ion with an electric charge of -1.
Explanation:
hope this helps
pls mark brainliest
compare and contrast then 4 types of friction?
Answer:
There are four types of friction: static, sliding, rolling, and fluid friction. Static, sliding, and rolling friction occur between solid surfaces. Static friction is strongest, followed by sliding
Explanation:
hope i help!.
(Word equation) which of the four metals - aluminium, copper, lead and silver is the most reactive
Answer:
Aluminum
Explanation:
I just used the Reactivity Series chart :)
Part D
Calculate the following for test tube 1 and for test tube 2, and record the results in the table:
the number of moles of copper(II) sulfate used (Use 159.60 grams/mole as the molar mass of copper(II) sulfate.)
the heat absorbed by the water, in joules (Use Q = mCΔT, where 10.0 milliliters of water has a mass of 10.0 grams. Use 4.186 joules/gram degree Celsius as water’s specific heat capacity.)
the change in internal energy of the copper(II) sulfate (Assume that the energy released by the copper(II) sulfate is absorbed by the water.)
the reaction enthalpy, in joules/mole
The heat lost by copper(ii) sulfate is equal to heat absorbed by water since the total energy in the system remains constant according to the law of conservation of energy.
How can the number of moles be determined?The number of moles of a substance is determined using the formula below:
Number of moles = mass/molar massAssuming the mass of copper(ii) sulfate used is Mc, number of moles of copper(ii) sulfate used is:
Moles of copper(ii) sulfate = Mc/159.60 molesThe heat absorbed by water is calculated using the formula below:
Quantity of Heat, H = mass × specific heat capacity × temperature changemass of water = 10 g
Let temperature change be Tc
Heat absorbed by water = 10 × 4.186 × Tc = 41
86Tc
The change in internal energy, ΔU of copper(ii) sulfate, is given as:
ΔU = Q − Wwhere:
Q = heat absorbed by water
W = work done by or on the system
The enthalpy of the reaction is given as:
ΔH= energy released or absorbed/moles of copper (ii) sulfateTherefore, according to the law of conservation of energy, the total energy in the system remains constant.
Learn more about internal energy change at: https://brainly.com/question/14126477
NEED HELP PLEASE HURRY
Which of the following are decomposition reactions? Select all that apply.
H2CO3 -> CO2 + H2O
CaCO3 -> CaO + CO2
2H2O -> 2H2 + O2
3Mg + N2 -> Mg3N2
2NaCl -> 2Na + Cl2
Answer:
I believe it would be the last 2
Explanation:
the 4th one is magnesium and something else but that's with decomposition and so is the last one. the first three has water and oxygen and stuff that doesn't rly do decomposition
What is the empirical formula of a compound containing 65.5 grams carbon, 5.5 grams hydrogen, and 29.0 grams oxygen?
Answer: The empirical formula is C₃H₃O.
Explanation: Assume we have 100 g of the compound. Then we have 65.65.5 g of C, 5.5 g of H, and 29.0 g of O.
Answer:
C₃H₃O
Explanation:
I took the test
Given that [OH-] = 5.46x10^-9M
find the [H3O+] and state whether the solution is acidic or not and why?
pH:-
14-pOH14-8.265.74It's acidic as pH<7
Now
-log[H+]=5.74log[H+]=-5.74H+=10^{-5.74}H+=1.81×10^-6MHi!! Please help in any way you can, I’ll give all of the points I have for it ^^
(Showing work is sadly required + needs to include units)
The reactions involved are synthesis, combustion and single replacement reactions and the masses of products formed are dependent on the mole ratio.
What are limiting reactants?Limiting reactants are reactants are reactants that are used in a chemical reaction.
The equation for the production of water is given below:
[tex]2H_2 + O_2 \rightarrow 2H_2O[/tex]
The reaction is a synthesis reaction and the mole ratio of hydrogen to oxygen is 2 : 1.
Moles of 250 g of Hydrogen = 250/2 = 125 moles
Moles of water produced = 125 moles
Mass of water = 125 × 18 = 2250 g
Moles of oxygen in 250 g = 250/32 = 7.81 moles
Moles of water produced = 7.81 × 2 = 15.62
Mass of water produced = 15.62 × 18 = 281.16 g
Since moles of oxygen use is less than the mole ratio of reaction, oxygen is the limiting reactant.
2. The reaction of propane and oxygen is a combustion reaction and is given below:
[tex]C_3H_8 + 5O_2 \rightarrow 3CO_2 + 4H_2O[/tex]
1 mole of propane produces 4 moles of water
44 g of propane produces 72 g of water
Mass of propane required to produce 1000 g of water = 1000 × 44/ 72 = 611.1 g of propane
3. The reaction of zinc and hydrochloride acid is a single replacement reaction and the equation is given below:
[tex]Zn + 2HCl \rightarrow ZnCl_2 + H_2[/tex]
1 mole of Zn and 2 moles of HCl are required to produce 1 mole of hydrogen gas
Molar mass of Zn = 65 g
Molar mass of HCl = 36.5
Molar mass of hydrogen = 2.0 g
150 g of Hydrogen gas = 150/2 = 75 moles of hydrogen
Mass of 75 moles of Zn = 75 × 65 = 4875 g
mass of 75 × 2 moles if HCl = 150 × 36.5 =5475 g
Therefore, 4875 g of Zn and 5475 g of HCl are required to produce 150 g of Hydrogen gas.
Learn more about limiting reactant at: https://brainly.com/question/14225536
Help I Will Mark Brainlist !! (ATTACHED IMAGE BELOW) Which of the diagrams below would be the FASTEST? _____ Why? Which of the diagrams below would be the SLOWEST? ____ Why?
Answer:
Fastest C. Reaction time is faster
Slowest A. Reaction time is slower and it takes longer to finish
Explanation:
Ge (g) + 2Cl2 (g) <-> GeCl4 (g)
The value of the equilibrium constant for the reaction represented above is 1 x 10^10. What is the value of the equilibrium constant for the following reaction?
2GeCl4(g) = 2Ge(g) + 4Cl2 (g)
The equilibrium constant gives us an idea of the extent of reaction. For the reaction; 2GeCl4(g) = 2Ge(g) + 4Cl2 (g), the equilibrium constant is 1 * 10^-20.
What is equilibrium constant?The equilibrium constant gives us an idea of the extent of the conversion of reactants to products in a reaction.
In this case, we know that 2GeCl4(g) = 2Ge(g) + 4Cl2 (g) is the reverse of Ge (g) + 2Cl2 (g) <-> GeCl4 (g) hence we only need to invert the value of the equilibrium constant and raise it to power 2 to have 1 * 10^-20.
Learn more about equilibrium constant: https://brainly.com/question/10038290
how many moles of Al are produced from a reaction using 82 g of Ca?
Answer:
how many moles of Al are produced from a reaction using 82 g of Ca?
Explanation:
How many moles of Fe2O3 will react with 99.0 g of Al? 1.83. 2. Ammonium nitrate decomposes to yield nitrogen gas, water, and oxygen gas in the following ...
Which of the following increases the rate at which a solute is dissolved by
a solvent?
a.
Keeping the solution completely still.
b. Placing the solution in an ice bath as it forms.
c. Heating the solvent to its boiling point before adding the solute.
d. Leaving the solute in chunks rather than breaking it up before dissolving it. you
about the
experiment (restate your results), and what you learned from completing the experiment.
Answer: C
Explanation:
Increasing the temperature increases the rate of dissolving.