50 points!

A. The object in the diagram above is called a(n)? _____

B. Given only the materials in the diagram, how can the strength of the magnetic field be increased? _____​

The electromagnetic wave that has the highest energy photons is X-rays.

Photons are energy quanta that make up electromagnetic radiation. They are released when atoms move from high energy states to lower energy states.

Photons come in a variety of wavelengths and energies, with longer wavelengths being less energetic than shorter wavelengths.

Electromagnetic waves are composed of electric and magnetic fields that oscillate perpendicularly to one another as they travel through space. They are transverse waves, which means that their oscillations are perpendicular to the direction of motion.

X-rays are a type of electromagnetic radiation with a high energy level. They have a much shorter wavelength than visible light, and their photons have much more energy than those in visible light.

X-rays can be produced in a variety of ways, including by bombarding a target with high-speed electrons, by nuclear decay, or by synchrotron radiation.

X-rays are widely used in medical imaging, such as radiography and CT scans, as well as in material analysis and crystallography.

However, X-rays can be harmful to living organisms at high doses because they can ionize atoms and cause cellular damage.

To know more about X-rays, refer here:

https://brainly.com/question/23281551

#SPJ11

Answer:

As newton's 1st Law states that " A body tends to be at rest or in motion until an external force is  applied "

Explanation:

so football will remains at rest until you kick it or stop it with your hands

A setup of pith balls that have negative charges and are hanging from the same point would consist of two or more small lightweight balls made of a porous plant material.

A pith ball is a small, lightweight ball made of a porous plant material called pith, typically from a plant stem, that is used in electrostatics experiments to demonstrate the principles of electrostatic force and charge.

For the setup of pith balls that have negative charges and are hanging from the same point would consist of two or more small lightweight balls made of a porous plant material, each carrying a negative charge, suspended from a common point using thin strings or threads. The balls would repel each other due to their like charges and hang at an angle away from each other.

Learn more about pith balls:https://brainly.com/question/19741819

#SPJ1

The wavelength of a 300 Hz sound wave traveling through water at a temperature of 25°C is 5 meters.

Given that the speed of sound in water at a temperature of 25°C is 1500 m/s and the frequency of the sound wave is 300 Hz, to find the wavelength of a sound wave traveling through water at a temperature of 25°C, we have to use the following formula.

The wavelength of a sound wave can be calculated using the formula:

wavelength = speed of sound / frequency

Here, the frequency of the sound wave is given as 300 Hz.

Substituting the given values in the formula, we get:

wavelength = 1500 m/s / 300 Hz

wavelength = 5 meters

For more question on wavelength click on

https://brainly.com/question/10728818

#SPJ11

It will take approximately 3.01 seconds for the pendulum bob to swing back to the person.

To answer this question, we need to find the period of the pendulum and then calculate the time it takes for the pendulum to swing back to the person.
Step 1: Calculate the period of the pendulum
The formula for the period of a simple pendulum is given by:
T = 2π√(L/g)
where T is the period.

L is the length of the cable (9.01 m), and g is the acceleration due to gravity (approximately 9.81 m/s²).
Step 2: Plug in the values and solve for T
T = 2π√(9.01 m/9.81 m/s²)
T ≈ 2π√(0.918 s²)
T ≈ 2π(0.958 s)
T ≈ 6.02 s
The period of the pendulum is approximately 6.02 seconds.
Step 3: Calculate the time it takes for the bob to swing back to the person
Since the period represents the time it takes for the pendulum to complete one full oscillation, and the person releases the bob at its highest point, the time it takes for the bob to swing back to the person is half of the period.

Therefore, we can calculate this time as follows:
Time to swing back = T/2
Time to swing back ≈ 6.02 s/2
Time to swing back ≈ 3.01 s.

For similar question on pendulum.

https://brainly.com/question/27187715

#SPJ11

George Washington Carver, an agricultural scientist, had a significant impact on the lives of farmers in the Southern United States. Here are two ways that his work influenced their lives:

Crop Diversification: Carver encouraged farmers to diversify their crops and move away from their dependence on cotton.

Soil Conservation: Carver was a strong advocate for soil conservation and introduced farming practices that helped to conserve soil. He recommended practices such as crop rotation, using cover crops, and adding organic matter to the soil to improve its quality.

Thus, this way, Carver's work impact the lives of farmers in the South.

For more details regarding George Washington Carver, visit:

https://brainly.com/question/11044676

#SPJ1

If the ground on a machine is live (hot) and causes an electrical shock, this likely means that there is a fault in the electrical system, such as broken insulation or a short circuit.

A machine's electrical system is malfunctioning if the ground is live and generates an electrical shock. The machine's ground is meant to offer a secure route for electrical current to flow to earth in the event that there is an electrical system malfunction. An electrical conductor is said to be "live" if it is carrying an electrical current. A live ground indicates a hole in the electrical system's insulation that allows electrical current to pass to the ground, posing a serious safety risk. To reduce the risk of electrical shock or electrocution to anybody coming into touch with the equipment, immediate action should be made to shut it down and rectify the problem before future usage.

learn more about electrical system here:

https://brainly.com/question/30585051

#SPJ4

The second-order maximum for light of wavelength 650 nm will be located approximately 15.6 mm from the central bright spot on the same screen.

Wavelength of light for the third-order maximum = 500 nm

Distance of third-order maximum from the central bright spot = 12 mm

Distance of screen from the slits = 1.3 m

Wavelength of light for the second-order maximum = 650 nm

Using the equation d sin θ = mλ, where d is the distance between the slits, θ is the angle between the line connecting the slits and the screen and the line connecting the bright spot and the central bright spot, m is the order of the bright spot, and λ is the wavelength of the light.

For the third-order maximum with 500 nm light:

d sin θ = mλ

d sin θ = 3 * 500 nm

d sin θ = 1500 nm

sin θ = 1500 nm / d

Given, distance from the central bright spot to the third-order maximum = 12 mm

Given, distance of screen from the slits = 1.3 m

Thus, tan θ = (12 mm) / (1.3 m)

θ = 0.013 radians

sin θ = 0.013

sin θ = 1500 nm / d

d = 1500 nm / sin θ

d = 1500 nm / 0.013

d = 115,384.6 nm

d = 115.4 µm

For the second-order maximum with 650 nm light:

d sin θ = mλ

d sin θ = 2 * 650 nm

d sin θ = 1300 nm

sin θ = 1300 nm / d

Using the value of θ calculated for the third-order maximum:

sin θ = 0.013

sin θ = 1300 nm / d

d = 1300 nm / sin θ

d = 1300 nm / 0.013

d = 100,000 nm

d = 100 µm

Thus, the distance from the central bright spot to the second-order maximum for light with wavelength 650 nm is approximately 100 µm, or 15.6 mm from the central bright spot on the screen.

To know more about wavelength, refer here:

https://brainly.com/question/4112024#

#SPJ11

When an object rolls without slipping down an inclined plane, the true statement(s) about static friction force are: It provides the torque to cause the angular acceleration and it goes against gravity to reduce the acceleration caused by gravity. The correct answer is B and E.

Friction is the force that opposes relative motion between surfaces in contact. It is also called a contact force because it operates between the surfaces in contact when they're in motion or when a force tries to move them relative to one another.

An inclined plane is a simple machine that consists of a sloping surface that connects a lower point to a higher point. It is one of the six classical simple machines that is used to reduce the effort needed to raise a weight to a certain height.

Rolling without slipping is a combination of translational motion (movement in a straight line) and rotational motion (movement around an axis) without any slipping occurring between the surfaces in contact. A wheel or any other circular object rolls without slipping when its forward motion is the same as its rotational motion.

Static friction is the force that keeps an object at rest or in a state of uniform motion on a surface when a force is applied on it. When two surfaces are in contact, static friction is the force required to overcome the sticking between them that resists motion.

To know more about static friction force, refer here:

https://brainly.com/question/17237604#

#SPJ11

The power output of the marine during the vertical climb of 11.5 m at a constant speed in 7.50 s is 1024.4 W. 

Power is the rate of doing work or the rate of transfer of energy in a unit time. Power is given by the expression:

P = W/t

where, P is power measured in watts (W), W is work done measured in joules (J), t is time taken measured in seconds (s).

The formula for work done is given by the expression:

W = F × d

where, F is the force applied measured in newtons (N), d is the distance traveled measured in meters (m)

The power of the marine in basic training during the climb is given by the expression:

P = W/t

P = F × d/t

From the question, the force (F) acting on the marine is equal to his weight (W). The weight (W) of the marine is given by the expression:

W = mg

where, m is the mass of the marine measured in kilograms (kg), g is the acceleration due to gravity which is 9.8 m/s²

On substituting the values given:

W = mg

W = 675 N (given)g = 9.8 m/s²

Hence, W = 675 × 9.8 = 6615 J

The distance (d) traveled by the marine is given as 11.5 m. The time (t) taken to travel the distance is given as 7.50 s.

Substituting the values given:

P = F × d/t

P = W/t

P = (mg × d)/t

P = (6615 × 11.5)/7.50P = 1024.4 W

Therefore, the power output of the marine during the vertical climb of 11.5 m at a constant speed in 7.50 s is 1024.4 W.

Know more about power output here:

https://brainly.com/question/866077

#SPJ11

To calculate the total mass of 0.75 moles of SO2  is  D. 48g .we need to use the molecular mass of SO2.

The sum of the atomic masses of all the atoms present in a molecule is known as its molecular mass. The molecular mass of SO2 is calculated by adding the atomic masses of sulfur and oxygen. Sulfur has an atomic mass of 32 g/mol, and oxygen has an atomic mass of 16 g/mol. Therefore, the molecular mass of SO2 can be calculated as follows:1 sulfur atom + 2 oxygen atoms = (1 × 32 g/mol) + (2 × 16 g/mol) = 32 g/mol + 32 g/mol = 64 g/mol Now that we have calculated the molecular mass of SO2, we can use the following formula to calculate the total mass of 0.75 moles of SO2:Total mass of SO2 = Number of moles × Molecular mass Total mass of SO2 = 0.75 mol × 64 g/mol Total mass of SO2 = 48 g Therefore, the total mass of 0.75 moles of SO2 is 48 g Therefore the correct option is  D

The complete question is :

What is the total mass in grams of 0.75 mole of SO2?

a. 16 g

b. 24 g

c. 32 g

d. 48 g

Know more about molecular mass here :

https://brainly.com/question/24191825

#SPJ11

The final velocities of the two identical billiard balls after an elastic collision is equal in magnitude but opposite in direction.

When two identical billiard balls collide elastically with one ball initially traveling at v and the other at -v, their final velocities can be found using the principle of conservation of momentum. Assuming they have equal masses, we can simplify the problem by assuming both balls have equal speeds of v and -v. Applying conservation of momentum, we get [tex]m1v + m2(-v) = m1u1 + m2u[/tex]. Kinetic energy is also conserved, so [tex](1/2)m1v^2 + (1/2)m2(-v)^2 = (1/2)m1u1^2 + (1/2)m2u2^2[/tex]. Solving for the final velocities, we find that both balls have equal magnitudes of v but opposite directions: the first ball moves in the positive x-direction, while the second moves in the negative x-direction.

learn more about elastic collision here:

https://brainly.com/question/12941951

#SPJ4

According to time dilation, the elapsed time between two events is different for observers in relative motion to each other. The formula for time dilation is given by:

Δt' = Δt / sqrt(1 - v^2/c^2)

where Δt is the time interval measured by the observer in the rest frame, Δt' is the time interval measured by the observer in the moving frame, v is the relative velocity between the two frames, and c is the speed of light.

In this problem, the neutron is at rest relative to the first observer and its lifetime is measured to be 900 s. The neutron is moving relative to the second observer, and its lifetime is measured to be 2065 s. We want to find the velocity v of the neutron relative to the second observer.

We can use the time dilation formula twice, once for each observer:

Δt' = Δt / sqrt(1 - v^2/c^2)

For the first observer (rest frame of the neutron), Δt = 900 s and Δt' = 2065 s (measured by the second observer):

2065 = 900 / sqrt(1 - v^2/c^2)

Simplifying and rearranging:

(1 - v^2/c^2) = (900/2065)^2

1 - v^2/c^2 = 0.155

v^2/c^2 = 0.845

v/c = sqrt(0.845)

v = 0.919c

Therefore, the neutron is moving at a speed of 0.919 times the speed of light relative to the second observer.

The magnitude of the torque produced by force F is 1.10 N*m, and the direction of the torque is -49.0 degrees below the positive x-axis (clockwise direction).

The problem requires the calculation of the torque produced by a force acting on a machine. To do so, we need to calculate the cross product of the force and the vector from the origin where the force is applied. The magnitude of the torque is the product of the magnitudes of the force and the lever arm (the perpendicular distance from the origin to the line of action of the force). The direction of the torque is determined by the right-hand rule, which states that the direction of the torque is perpendicular to both the force and the lever arm, and follows the right-hand rule. In this case, the torque is in the clockwise direction, or -49.0 degrees below the positive x-axis.

Learn more about magnitude here: brainly.com/question/14452091

#SPJ4

(a) The magnitude of force required to give a helicopter of mass 2M an acceleration of 0.10 g upward is 1.962M N.

(b) The work done by this force as the helicopter moves a distance h/2 upward is 0.981M h Joules.

(a) To find the force required to give the helicopter an upward acceleration of 0.10 g, we can use the following equation:
Force (F) = Mass (m) × Acceleration (a)

The acceleration due to gravity (g) is approximately 9.81 m/s². Therefore, 0.10 g is equal to 0.10 × 9.81 m/s², which is 0.981 m/s².

The helicopter's mass is given as 2M. So, we can plug the values into the equation:

F = 2M × 0.981 m/s²

F = 1.962M N (Newtons)

So, the magnitude of the force required is 1.962M N.

(b) To find the work done by this force as the helicopter moves a distance of h/2 upward, we use the equation:

Work (W) = Force (F) × Distance (d) × cos(θ)

Since the force is acting vertically upward and the helicopter is moving in the same direction, the angle (θ) between the force and the distance is 0°, and the cosine of 0° is 1.

The force (F) is 1.962M N and the distance (d) is h/2. Therefore:

W = 1.962M N × (h/2) × 1

W = 0.981Mh J (Joules)

The work done by this force as the helicopter moves a distance h/2 upward is 0.981Mh Joules.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ11

The wave's wavenumber equals 0.628 radians per meter.

The given progressive wave equation is represented by Y = A sin 2π(0.15t + 0.1x), where Y is the displacement of the wave at a point in space and time, A is the amplitude of the wave, t is the time, and x is the position of the point along the direction of wave propagation.

The period of a wave is the time it takes for one complete cycle of the wave to occur. In the given equation, the coefficient of t in the argument of the sine function is 0.15. This means that the wave completes one cycle in (1/0.15) = 6.67 seconds.

Therefore, the period of the wave is 6.67 seconds.

The wavenumber of a wave is the number of waves that occur in a given distance. In the given equation, the coefficient of x in the argument of the sine function is 0.1. This means that the wave completes one cycle in a distance of (1/0.1) = 10 meters.

Therefore, the wavenumber of the wave is (2π/10) = 0.628 radians per meter.

In summary, the period of the given wave is 6.67 seconds and the wavenumber is 0.628 radians per meter. These values can be used to calculate other properties of the wave, such as its frequency and velocity, using the relevant formulas.

To learn more about progressive wave equation refer to:

brainly.com/question/25699025

#SPJ4

The fact that all the planets of the solar system orbit in the same direction and that meteorites and rocks from the Moon have similar ages suggests that all the bodies of the solar system formed at the same time from the same spinning nebula.

This is known as the nebular hypothesis, which is the most widely accepted theory of the formation of the solar system.

According to the nebular hypothesis, the solar system formed from a rotating cloud of gas and dust called the solar nebula. As the nebula rotated, it flattened into a disk, with the Sun forming at the center and the planets forming from the material in the disk. The fact that all the planets orbit in the same direction and that meteorites and rocks from the Moon have similar ages suggests that they all formed from the same disk of material and at the same time.

The nebular hypothesis is the most widely accepted model in the field of cosmogony to explain the formation and evolution of the Solar System (as well as other planetary systems). It suggests that the Solar System formed from a rotating cloud of gas and dust called the solar nebula. As the nebula rotated, it flattened into a disk, with the Sun forming at the center and the planets forming from the material in the disk. The nebular hypothesis was first proposed by Immanuel Kant and later developed by Pierre-Simon Laplace in the 18th century.

The nebular hypothesis is supported by several lines of evidence, including the fact that all the planets of the solar system orbit in the same direction and that meteorites and rocks from the Moon have similar ages. These suggest that all the bodies of the solar system formed at the same time from the same spinning nebula.

To know more about nebular hypothesis, visit :

https://brainly.com/question/27986174

#SPJ1

Answer:

The proper answer is (Large water bodies change temperature more slowly than land masses. Land masses close to large bodies of water, particularly oceans, experience temperature changes that are slower and less pronounced than those experienced by land masses farther away. Furthermore, warm water accelerates evaporation, which leads to precipitation.)

Explanation:

Brainliest pls!

The populist movement in Texas organized to address reforms needed to address the economic and political challenges faced by farmers, laborers, and small business owners in the late 19th century.

During this time, the state was undergoing significant economic changes, including the decline of agriculture and the rise of industry, which led to increased economic inequality and political corruption.

The populist movement sought to address these issues through a variety of reforms, including the regulation of railroads, the creation of a graduated income tax, the establishment of a state-owned bank, and the implementation of a secret ballot system. They also advocated for the protection of workers' rights, such as the right to unionize and the establishment of fair labor laws.

To know more about populist movement, here

brainly.com/question/2597724

#SPJ4

To determine the sign of charges in a current, an experiment can be conducted using a known reference conductor and a voltmeter.

First, connect the reference conductor to a voltage source and measure the voltage with the voltmeter. Then, connect the conductor in question to the same voltage source and measure the voltage again. If the voltage reading is higher for the conductor in question, then the charges are of opposite signs, with the reference conductor being positively charged and the other conductor being negatively charged. Conversely, if the voltage reading is lower for the conductor in question, then the charges are of the same sign, with both conductors being either positively or negatively charged.

To know more about voltmeter, here

brainly.com/question/8505839

#SPJ4

Most individuals can live an active life through walking, including those with impairments who can move around through the use of assistance equipment. wheelchair-accessible bus vehicles

It is acceptable to claim that everyone in society, including those with disability, benefit from accessibility. Enhancing accessibility results in a higher quality of life, as well as more independence and social integration. Also, it promotes improved health and has a variety of cost-saving benefits.

While "wheelchair accessible" is a common way to characterise a facility or amenity that helps persons with disabilities, accessibility may also refer to Braille sign, wheelchair access, elevators, sounds at pedestrian crossings, pathway contours, web designing, and other things.

To know more about around visit:

https://brainly.com/question/1807806

#SPJ1

Answer:

Momentum is the product of mass of a body and its velocity.

Initially before collision and after collision, velocity changes but mass is a constant factor. Therefore, only one term changes by a constant change hence momentum gained initially, and that gained finally is equal

Answer:

To solve this problem, we can use the conservation of energy principle which states that the total energy in a system remains constant. At the maximum height, all of the elastic potential energy stored in the spring will be converted into gravitational potential energy.

The elastic potential energy stored in the spring can be calculated using the formula:

Ee = (1/2)kx^2

where Ee is the elastic potential energy, k is the spring constant, and x is the displacement of the spring from its equilibrium position.

We can determine the spring constant by using Hooke's law, which states that the force exerted by a spring is proportional to its displacement from the equilibrium position:

F = -kx

where F is the force exerted by the spring and x is the displacement.

We can rearrange this equation to get:

k = -F/x

where F is the force exerted by the spring when it is compressed and x is the displacement.

Assuming that the spring is compressed by 0.5 meters and exerts a force of 200 N, we can calculate the spring constant as follows:

k = -200 N / 0.5 m = -400 N/m

Now we can calculate the maximum height that the child can jump using the maximum elastic potential energy stored in the spring:

Ee = Eg

(1/2)kx^2 = mgh

where Eg is the gravitational potential energy, m is the mass of the child and stick, and h is the maximum height.

We can rearrange this equation to solve for h:

h = (1/2)kx^2 / mg

Substituting the values we have:

h = (1/2)(-400 N/m)(0.5 m)^2 / (38 kg)(9.81 m/s^2)

h = 0.255 m

Therefore, the child can jump to a maximum height of 0.255 meters above the compressed position of the spring using only the maximum elastic potential energy in the spring.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

The required capacitance of the adjustable capacitor so that we can cover the entire range of carrier frequencies on the AM dial to pick up radio signals between about 540 kHz and 1600 kHz is [tex]C=8.68\times 10^{-12} F[/tex]  and  [tex]C = 9.8 \times 10^{-13} F[/tex] respectively.

The resonance frequency of an LC circuit is given by the following equation;

[tex]1/(2\pi \sqrt{LC}) = f[/tex]

Where f is the frequency

L is the inductance of the circuit.

C is the capacitance of the circuit.

Now, we need to find out the capacitance range that can cover the entire range of AM frequencies between 540 kHz to 1600 kHz for a 10mH inductor.

By rearranging the above formula and putting the values, we get the following:

At 540 kHz;

[tex]C} = 1 / (4\pi^2 \times 0.01 H \times (540,000 Hz)^2)[/tex]

[tex]C=8.68\times 10^{-12} F[/tex]

At 1600 kHz;

[tex]C = 1 / (4\pi^2 \times 0.01 H \times (1,600,000 Hz)^2)[/tex]

[tex]C = 9.8 \times 10^{-13} F[/tex]

Therefore, the required capacitance of the adjustable capacitor so that we can cover the entire range of carrier frequencies on the AM dial when an AM radio uses an LC circuit as a resonator to pick up radio signals between about 540 kHz and 1600 kHz is [tex]C=8.68\times 10^{-12} F[/tex] and [tex]C = 9.8 \times 10^{-13} F[/tex] respectively.

Learn more about inductance:

https://brainly.com/question/4425414

#SPJ11

The spring compressed as the block comes to momentary rest is Δx = 34.5 Cm. The block moving right after it comes off the spring is 3.057 m/s. The change of the gravetational potential energy in joules is -33.4 J.

(a) potential energy gets Converted to Spring energy-

mg(nt 0.16m) Sin 8-1/2x2

= 4.9 x 9.8 (n + 0.76) Sin 39° = 1/2 x 560 x [tex]x^2[/tex]

= 48.02x + 36.4952 x 0.6293=280x^2

= 30.218986x + 22.966 = 280x^2

= 280x^2 -30.218 x - 22.966 =0

= x = 0.345m

= x = 34.5 Cm

(b) Spring energy becomes PE and KE

1/2kn^2 = myx Sin[tex]\theta[/tex] + 1/2 mv^2

1/2 x 560 x (0.345)^2 = 4.9 x 9.8 x 0.345 x Sin 39° + 1/2x4.9 x V2

33.327 = 10.42588 +245 V^2

33.327 - 10.42588 = 245V^2

22.90112= 2.45 v^2

V^2=9.347393918

V=3.057 m/s

(c) Gravitational potential eneepy

change in [tex]G_{PE}[/tex] = mgΔh

=4.9 x 9.8 x -(0.345 + 0.76) Sin [tex]39^o[/tex]

= -33.39 J

= -33.4 J

Potential energy is a form of energy that is stored within an object and can be released when the object undergoes a change in position or configuration. There are different types of potential energy, such as gravitational potential energy, elastic potential energy, and electric potential energy.

Gravitational potential energy is the energy an object possesses due to its position in a gravitational field, such as a ball held up high in the air. Electric potential energy is the energy stored in a charged object due to its position in an electric field. The amount of potential energy an object has depends on various factors, such as its mass, height, distance, and the strength of the force field it is in.

To learn more about Potential energy visit here:

brainly.com/question/12563191

#SPJ4

The work done by the spring as it is compressed from x = 0 to x = L is [tex]-1/2kL^2[/tex].

To find the work done by the spring as it is compressed, we need to integrate the force applied by the spring with respect to the displacement. The force applied by the spring is given by Hooke's law as F = -kx, where x is the displacement from the equilibrium position.

Integrating this expression with respect to x from x = 0 to x = L, we get:

W = ∫F dx from x = 0 to x = L

W = ∫-kx dx from x = 0 to x = L

W = [tex]-1/2kx^2[/tex] from x = 0 to x = L

W = [tex]-1/2kL^2[/tex] + [tex]1/2k(0)^2[/tex]

W = [tex]-1/2kL^2[/tex]

Therefore, the work done by the spring as it is compressed from x = 0 to x = L is [tex]-1/2kL^2[/tex].

Learn more about Hooke's law here https://brainly.com/question/29126957

#SPJ4

Answer:

a)

i. A photoelectric current is registered on the microammeter when light of a certain wavelength is incident on the photocell because the energy of the incident photons of the light exceeds the work function of the metal surface of the photocell. This causes the photoelectrons to be emitted from the metal surface and a current to be registered on the microammeter.

ii. The current is found to increase with the light intensity is increased because as the intensity of the incident light increases, the number of photons incident on the metal surface also increases. This increases the number of photoelectrons emitted per unit time, resulting in an increase in the photoelectric current.

b)

i. When the incident light wavelength is increased, the photoelectric current falls to zero because as the wavelength of the incident light is increased, the energy of the incident photons decreases. When the energy of the incident photons becomes less than the work function of the metal surface, no photoelectrons are emitted and hence no current is registered on the microammeter.

ii. The current would still be zero if the light wavelength is kept the same and the intensity is increased because the energy of the incident photons is still less than the work function of the metal surface. Increasing the intensity of the incident light only increases the number of photons incident on the metal surface, but does not increase the energy of the individual photons. Hence, no photoelectrons are emitted and no current is registered on the microammeter.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

The brightness of the three bulbs compared to each other is bulb A is brighter than B and C which have the same brightness.

According to Ohm's law, the current passing through a conductor is directly proportional to the potential difference applied across its ends and inversely proportional to the resistance of the conductor. So, the bulb with the least resistance will draw more current and shine brighter as compared to the other two bulbs. Thus, the bulb with the least resistance will be the brightest.

Besides, it is mentioned that the battery maintains a constant potential difference between its terminals. It means that the internal resistance of the battery is negligible. Therefore, the voltage across the three bulbs will be the same, and the current passing through each bulb will depend on the resistance of the individual bulbs.

In the given circuit, the brightness of the three bulbs will be different from one another. Bulb А is brighter thаn B аnd C which hаve the sаme brightness. This is because the correct thru А is lаrger becаuse its pаrаllel pаth hаs less resistаnce thаn the B аnd C pаth.

Your question is incomplete, but most probably your figure can be seen in the Attachment.

Learn more about potential difference:

https://brainly.com/question/12198573

#SPJ11

Explanation:

Horizontal components:

10 N     +    12 cos (-100) =   + 7.916 N  

Vertical components

0   +    12 sin (-100)  = - 11.818 N

To have equilibrium, the third force must be of the same MAGNITUDE and OPPOSITE direction

   so    Horizontal = - 7.916 N

           Vertical  = + 11.818 N  

Magnitude =  sqrt ( -7.916^2 + 11.818^2 ) = 14.22 N

  at angle   arctan (- 11.818/7.916 ) =   123.8  degrees  

The projectile's initial velocity is 36.05 metres per second horizontally, 26.98 metres per second vertically, and 38.19 metres per second at an angle of 18.32 degrees below horizontal.

R equals u2 sin(90+2)g=u2 cos 2g for the angle (45+). Q. The ratio is used to represent the horizontal ranges covered by two projectiles launched from the same location with the same velocity at angles of (45°) and (45°+).

a) The horizontal component of the initial velocity: The formula for calculating the horizontal component of the initial velocity is

Vx = V cosθ

where V is the starting speed and is the projection angle with respect to the horizontal.

By substituting the provided values, we obtain:

Vx = 45 m/s sin 37 o

Vx = 36.05 m/s (rounded to two decimal places) (rounded to two decimal places)

As a result, the starting velocity's horizontal component is 36.05 m/s.

b) The initial velocity's vertical component

The equation Vy = V sin, where V is the starting velocity and is the angle of projection with the horizontal, can be used to calculate the vertical component of the initial velocity.

By substituting the provided values, we obtain:

Vy = 45 m/s sin 37°

Vy = 26.98 m/s (rounded to two decimal places)

Therefore, the vertical component of the initial velocity is 26.98 m/s.

To know more about projectile's visit:-

https://brainly.com/question/11049671

#SPJ1