!50 POINTS! WILL GIVE BRAINLIEST!
Why did the Huai River basin and other rivers in China become so heavily polluted?
Responses

A. Laws and regulations in China were extremely strict and expensive.

B. The Chinese government encouraged industrialization to keep up with a growing population.

C. The rivers run through unpopulated areas so would not affect people's health.

D. China had so many rivers that people thought polluting a few would have little impact.

Water circulates within and between living and non-living components in the tank via photosynthesis, evaporation, and condensation. Aquatic plants use water for photosynthesis, converting it into glucose and oxygen. Evaporation occurs due to heat, and condensation happens when water vapor returns to liquid form.

Water plays a crucial role in the movement and interactions within and between living and non-living things in the tank, including snails and the aquatic plant. The processes of photosynthesis, evaporation, and condensation are involved in the movement of water.

Photosynthesis is a vital process carried out by the aquatic plant. Through photosynthesis, the plant utilizes light energy, carbon dioxide, and water to produce glucose and oxygen. Water is absorbed by the plant's roots from the tank, and it is transported through the plant's vascular system to the leaves. In the leaves, water molecules undergo a series of chemical reactions in the chloroplasts, ultimately resulting in the release of oxygen and the formation of glucose. This process helps to regulate the water levels within the plant and produces oxygen as a byproduct.

Evaporation is the process by which water changes from a liquid to a gaseous state. As the tank is exposed to heat, such as from sunlight, some of the water in the tank and on the surfaces of the snails and plant will evaporate. The heat energy provides the necessary energy for water molecules to break free from the liquid phase and become water vapor.

Condensation occurs when the water vapor in the air comes into contact with a cooler surface and changes back into a liquid state. In the tank, as the water vapor rises from the evaporation process, it may come into contact with cooler surfaces, such as the sides of the tank or the leaves of the plant. When this happens, the water vapor condenses into liquid water droplets. These droplets can then accumulate on the surfaces of the tank, the snails, and the plant.

Overall, water moves within and between living and non-living things in the tank through the processes of photosynthesis, evaporation, and condensation. This movement is essential for the survival and functioning of the aquatic plant and the overall balance of the tank ecosystem.

For more such information on: photosynthesis

https://brainly.com/question/19160081

#SPJ8

The rectangular coordinate system is another name for the Cartesian coordinate system. It is a system used in geometry that employs coordinates to establish the location of a geometric component (such a point, for instance). Each location in this system is described by two numerical coordinates.

The following coordinate systems are used in each of the given scenarios:

A. Loss of energy through a flat double-pane window Cartesian coordinate system is used to model transport processes in the scenario of energy loss through a flat double-pane window. The major assumptions include that the process is symmetrical, the heat transfer coefficient is uniform, and the heat transfer is two-dimensional.

B. Transfer of dissolved oxygen from a culture medium into sphere-shaped cells Spherical coordinate system is used to model the transport processes in the transfer of dissolved oxygen from a culture medium into sphere-shaped cells. The assumptions include that the rate of oxygen transfer is uniform, the cells are symmetrical, and the diffusivity of oxygen is constant.

C. Fluid motion produced when stirring coffee in a typical mug cylindrical coordinate system is used to model the transport processes of fluid motion produced when stirring coffee in a typical mug. The assumptions include that the flow is two-dimensional, the flow is symmetrical, and the viscosity of the fluid is constant.

D. Dissipation of energy from the skin of a tall and skinny person Cartesian coordinate system is used to model the transport processes in the dissipation of energy from the skin of a tall and skinny person. The assumptions include that the surface temperature is uniform, the surface is symmetrical, and the heat transfer coefficient is uniform.

E. Heating of a cold bottle of alcoholic cider by a warm hand cylindrical coordinate system is used to model the transport processes of heating of a cold bottle of alcoholic cider by a warm hand. The assumptions include that the flow is two-dimensional, the flow is symmetrical, and the viscosity of the fluid is constant.

F. Velocity profile in waves about to crash on a flat shore Spherical coordinate system is used to model the transport processes in the velocity profile in waves about to crash on a flat shore. The assumptions include that the waves are symmetrical, and the diffusivity is constant.

know more about coordinate systems.

https://brainly.com/question/4726772

#SPJ11

Explanation:

Osmosis is a passive transport process during which water moves from areas where solutes are less concentrated to areas where they are more concentrated.

hope it helps you

please mark as brainliest

The information conveyed by a point plotted with the coordinates (1, 25) on the line graph is:

A. The average height of plants given 1 g of fertilizer was 25 cm.

In the given line graph, the vertical axis represents the average plant height in centimeters, and the horizontal axis represents the amount of fertilizer in grams per plant.

The coordinates (1, 25) indicate that when 1 gram of fertilizer was applied to each plant, the average height of the plants was 25 centimeters.

The x-coordinate represents the amount of fertilizer, and in this case, it is 1 gram. The y-coordinate represents the average plant height, and in this case, it is 25 centimeters.

Therefore, option A accurately describes the information conveyed by the plotted point (1, 25) on the line graph. It states that the average height of plants given 1 gram of fertilizer was 25 centimeters.

For more such answers on coordinates

https://brainly.com/question/24208141

#SPJ8

In a dry year, there are 22 grasshoppers per square yard on your pasture, based on the fact that they eat their own body mass in vegetation daily.

To determine the number of grasshoppers per square yard on your pasture during the dry year, we'll need to convert the given information into appropriate units and perform the necessary calculations.

Convert the grasshopper's daily food consumption from kg/acre to kg/square yard. Since there are 4,840 square yards in an acre, we can calculate the grasshopper's daily food consumption per square yard as follows:

Food consumption per square yard = (Food consumption per acre) / (Number of square yards in an acre)

= 106.5 kg / 4,840 square yards

= 0.022 kg/square yard

To determine the weight of vegetation that a grasshopper eats in a day. Given that a grasshopper eats its own body mass in vegetation daily and the average grasshopper on your land weighs 1 g (0.001 kg), we can calculate the weight of vegetation consumed by a grasshopper in a day:

Weight of vegetation consumed by a grasshopper = Body mass of grasshopper = 0.001 kg

Now, we can find the number of grasshoppers per square yard by dividing the food consumption per square yard by the weight of vegetation consumed by a grasshopper:

Number of grasshoppers per square yard = Food consumption per square yard / Weight of vegetation consumed by a grasshopper

= 0.022 kg/square yard / 0.001 kg

= 22 grasshoppers/square yard

To learn more about vegetation follow the link:

https://brainly.com/question/33358022

#SPJ4

Both deletion and insertion mutations can have the same disease outcome in the case of cystic fibrosis because they both result in a frameshift mutation.

In normal protein synthesis, the DNA code is read in groups of three nucleotides called codons. Each codon codes for a specific amino acid, and the sequence of codons determines the sequence of amino acids in the protein.

However, in a frameshift mutation, the reading frame of the DNA sequence is shifted, either by the deletion of a nucleotide or the insertion of an additional nucleotide. This alteration disrupts the normal grouping of codons, leading to a different sequence of amino acids being encoded.

In the context of cystic fibrosis, the misshapen protein in the cell membrane is caused by the frameshift mutation, which disrupts the normal structure and function of the protein. This misshapen protein interferes with the transport of chloride, leading to the buildup of mucus in the lungs characteristic of the disease.

Both deletion and insertion mutations alter the reading frame of the DNA sequence and result in a frameshift mutation, leading to the same disease outcome in cystic fibrosis. The specific location and size of the deletion or insertion may vary, but the overall consequence is the same: the production of a non-functional or partially functional protein that impairs chloride transport and causes mucus accumulation.

learn more about mutations here

https://brainly.com/question/13923224

#SPJ11

1. Yes, root hairs in Panicoideae arise from trichoblasts' epidermal cells.

2. No, a "perfect floret" cannot be seen without isolation.

1. Yes, root hairs in the Panicoideae subfamily typically arise from specialized epidermal cells called trichoblasts. These trichoblasts undergo differentiation and elongation to form root hairs, which are thin, elongated projections that increase the surface area of the root for nutrient and water absorption.

2. No, if you were to view the entire plant under a microscope, you would not see a "perfect floret." A floret refers to the small individual flower in the inflorescence of grasses, including those in the Panicoideae subfamily. To observe the structure of a floret under a microscope, you would need to isolate and prepare a specific floret sample, not the entire plant.

To learn more about epidermal follow the link:

https://brainly.com/question/30670952

#SPJ4

Blue Pinkgill (Entoloma hochstetteri) is primarily categorised as a saprophytic fungus.

Saprophytes obtain nutrients by decomposing organic matter that has died. The blue Pinkgill fungus typically grows on decaying wood, logs, or leaf debris, and it contributes to the decomposition and recycling of organic matter within the ecosystem.

Noting that some fungi, such as the blue Pinkgill fungus, can have complex ecological interactions and exhibit varying degrees of parasitism or mutualism depending on specific circumstances or interactions with other organisms is important. However, the Blue Pinkgill fungus is primarily saprophytic, as it obtains the majority of its nutrients from decomposing organic matter.

To learn more about Saprophytes,

https://brainly.com/question/11500804

The statement "The main growth mechanism for 1.4 mm raindrops is condensation/diffusional" is false because condensation/diffusional processes are not the main growth mechanisms for raindrops of that size.

Condensation refers to the process of water vapor turning into liquid droplets, while diffusion refers to the movement of molecules from an area of high concentration to an area of low concentration. These processes are significant in the initial stages of cloud formation and the growth of small cloud droplets. However, raindrops with a diameter of 1.4 mm are relatively large and are primarily formed through collision and coalescence.

As cloud droplets collide with each other, they stick together, forming larger droplets. This process continues until the droplets become heavy enough to fall as rain. The collision and coalescence process is the dominant mechanism for raindrop growth in larger sizes, including the 1.4 mm range, the statement is false.

To learn more about condensation follow the link:

https://brainly.com/question/5131267

#SPJ4

The true statement based on the phylogenetic tree is: "Ray-finned fish evolved before sharks."

In the given phylogenetic tree, the branches representing ray-finned fish and sharks originate from a common ancestor.

However, the branch representing ray-finned fish diverges earlier in evolutionary history compared to the branch representing sharks. This indicates that ray-finned fish appeared before sharks in the evolutionary timeline.

Phylogenetic trees illustrate the evolutionary relationships between different species or groups of organisms. The branching patterns in the tree show the common ancestry and divergence of different lineages.

By analyzing the structure of the phylogenetic tree, we can infer the relative timing of evolutionary events and the relationships between different groups of organisms.

In this case, the phylogenetic tree indicates that ray-finned fish evolved before sharks, suggesting that ray-finned fish have a longer evolutionary history and are more ancient than sharks.

It is important to note that this statement does not provide information about the relationship between crocodiles, amphibians, primates, rodents, rabbits, and other groups mentioned in the given options.

For more such answers on phylogenetic tree

https://brainly.com/question/2189834

#SPJ8

Question

Use the phylogenetic tree to the right to choose the true statement below.

Crocodiles are more closely related to amphibians than to primates.

A. Ray-finned fish evolved before sharks.

B. Rodents and rabbits are most closely related to primates.

C. Amphibians are more closely related to ray-finned fish than to primates.

In an ecosystem that is highly contaminated with PCBs (polychlorinated biphenyls), the highest concentration of PCB would be found in the tertiary consumer of the food chain.

Polychlorinated biphenyls (PCBs) are a group of chemicals that are no longer produced in the United States, but are still present in the environment. They were used as coolants and lubricants in electrical equipment such as transformers, capacitors, and other electrical equipment for years before being banned in the 1970s because of their harmful effects on human health and the environment.

PCBs enter the food chain as a result of bioaccumulation, which is the process by which chemicals accumulate in the fatty tissue of living organisms. PCBs have the potential to bioaccumulate and biomagnify in the food chain, which means that the concentration of PCBs increases as they move up the food chain from primary producers to secondary and tertiary consumers.

To know more about ecosystem visit :

https://brainly.com/question/31459119

#SPJ11

Answer:

The term that describes the relationship in which one organism lives inside the other one is endosymbiosis.

Explanation:

Scale of the model: 1:10,000. To find the scale of the model, we need to compare the size of the model to the actual size of the red blood cell. Given that the diameter of the red blood cell is 0.008mm and the diameter of the model is 80mm, we can calculate the scale by dividing the diameter of the model by the diameter of the actual cell.

Scale = Model diameter / Actual cell diameter

Substituting the given values:

Scale = 80mm / 0.008mm

Simplifying the expression:

Scale = 10,000

Therefore, the scale of the model is 1:10,000.

1. Identify the diameter of the red blood cell: 0.008mm.

2. Identify the diameter of the model: 80mm.

3. Use the formula Scale = Model diameter / Actual cell diameter.

4. Substitute the values into the formula: Scale = 80mm / 0.008mm.

5. Simplify the expression to find the scale: Scale = 10,000.

6. The scale of the model is 1:10,000, indicating that the model is 10,000 times larger than the actual red blood cell.

For more such questions on scale, click on:

https://brainly.com/question/28743660

#SPJ8

a) The reason for the significantly reduced amount of carbon-14 in the human skull compared to what is typically found in nature could be attributed to the process known as radioactive decay.

b) Based on the amount of carbon-14 remaining in the human skull, its age is estimated to be approximately 23,040 years.

a) Carbon-14 is a radioactive isotope of carbon produced naturally in the atmosphere. It is incorporated into living organisms and decays after they die. With a half-life of 5760 years, the carbon-14 to carbon-12 ratio decreases over time. The lower carbon-14 ratio in the discovered human skull indicates a significant passage of time since the individual's death, as a large number of carbon-14 atoms have decayed into nitrogen-14, leaving behind a smaller proportion of carbon-14.

b) To calculate the age of the human skull based on the remaining carbon-14, we can use the concept of half-life. The half-life of carbon-14 is 5760 years, which means that every 5760 years, half of the carbon-14 atoms decay into nitrogen-14.

We can set up the following equation to calculate the age of the skull:

Remaining carbon-14 ratio = (Initial carbon-14 ratio) * [tex](0.5)^{(number of half-lives)[/tex]

In this case, the initial carbon-14 ratio is 1 in every 16 trillion atoms, and the remaining carbon-14 ratio is 1 in every trillion atoms.

Let's solve for the number of half-lives:

(1/16 trillion) * [tex](0.5)^{(number of half-lives)[/tex] = (1/trillion)

Simplifying the equation:

[tex](0.5)^{(number of half-lives)[/tex] = (1/16)

Taking the logarithm base 0.5 of both sides:

number of half-lives = log base 0.5 (1/16)

Using a logarithm calculator, we find:

number of half-lives = 4

Since each half-life is 5760 years, the age of the skull is:

Age = (number of half-lives) * (half-life duration)

Age = 4 * 5760

Age = 23,040 years

To learn more about carbon follow the link:

https://brainly.com/question/30233846

#SPJ4

The correct question is:

a) You dig up a fossil of a human skull in Ethiopia. In nature, one normally finds that 1 out of every trillion carbon atoms is carbon-14, but the carbon in this human skull has only 1 in every 16 trillion atoms as carbon-14. Why is it so much less?

b) Given that the half-life of carbon-14 is 5760 years, calculate the age of the human skull.

Answer:

The correct answer is B. "Melanocytes and muscle cells express different genes."

Although all cells in an organism (such as a human) contain the same DNA, different cell types express different sets of genes. Gene expression is the process by which specific genes are activated to produce a needed protein. In this case, the gene responsible for melanin production is expressed in melanocytes, but not in muscle cells.

This does not mean that muscle cells have destroyed the gene for melanin (as stated in option C) or that melanocytes contain different genes from muscle cells (as stated in option D). All cells within an organism contain the same genes, but not all genes are expressed in every cell. The process of gene expression is regulated by the cell to ensure that each cell type functions properly.

Option A is also incorrect because all cells, including both muscle cells and melanocytes, rely on both DNA (for storing genetic information) and RNA (for transmitting that information and producing proteins). DNA is transcribed into RNA, which is then translated into proteins. This process occurs in all cells.

The statement explains the difference between skin melanocytes and muscle cells is - melanocytes and muscle cells express different genes. So option b  is correct.

Melanocytes are dark, dendritic-shaped, highly differentiated cells that secrete melanin, a pigment found in melanosomes, which is the primary function of melanocytes.

Melanocytes are a type of cell derived from the neural crest. They form a synapse with keratinocytes through their dendrites in the epidermis. Melanocytes play an important part in skin pigmentation and their role in the generation and distribution of melanin has been extensively studied.

To learn more about melanocytes, refer to the link:

https://brainly.com/question/12896990

#SPJ2

Answer:

Metabolism breaks down food into energy for an organism to use. Homeostasis then uses that energy to keep the organism in a balanced state so the organism can stay alive.

Explanation:

Microorganisms that are found in food are classified into three types; carbohydrates, proteins, and lipids based on the nutrient they consume.

These nutrients are found in food and are required by microorganisms to survive and grow. The Microorganisms that feed on carbohydrates are referred to as carbohydrate fermenters which convert carbohydrates into energy by breaking down the sugars found in carbohydrates. Some examples of carbohydrate fermenters include yeast, lactic acid bacteria, and acetic acid bacteria.

Microorganisms that feed on proteins are referred to as protein decomposers. They break down the proteins found in food into amino acids and use them as a source of energy. Examples of protein decomposers include proteolytic bacteria and fungi.

The microorganisms that feed on lipids are referred to as lipid decomposers. They break down the fats found in food into fatty acids and glycerol, which they then use as a source of energy. Examples of lipid decomposers include lipolytic bacteria and fungi.

Microorganisms in nutrient-rich soil:

https://brainly.com/question/1198095

#SPJ11

Culture has a significant impact on biology, including the ways in which people interact with one another, their lifestyles, and the foods they eat. Culture, in general, is a term that encompasses all human behavior patterns and social norms, which include things like language, traditions, beliefs, and customs.

culture molds or defines biology:

One of the keyways that culture molds or defines biology is through dietary practices and patterns. For example, many cultures have specific dietary guidelines and restrictions that are followed to ensure good health. In India, for example, vegetarianism is very common due to religious beliefs. Another example is the Japanese culture that places a strong emphasis on consuming fresh and minimally processed foods like fish, vegetables, and rice. These dietary practices have a profound impact on biology, including physical growth and development, cognitive function, and overall health and well-being. Another way culture molds biology is through behavior and lifestyle choices. For instance, in many Western cultures, it is common to sit for extended periods, which can lead to issues such as obesity, diabetes, and heart disease. In contrast, in many African and Asian cultures, individuals tend to be more active and engage in more physical labor, which can contribute to better overall health and lower disease rates. Other examples of culture affecting biology include reproductive behavior, attitudes towards mental health, and the use of natural remedies and medicines.

know more about biology.

https://brainly.com/question/28405832

#SPJ11

answer: silencer repress transcription. Like enhancers, silencers can be found before or after the gene they control and can be some distance away on the DNA strand

Answer:

Use the cloze in the interactive to fill in the blanks. Plants are amazing organisms! In a process called photosynthesis, they take sunlight and transform it into energy they can use to grow and survive.

Explanation:

Answer:

The process of using vesicles to move substances out of the cell is called exocytosis. During exocytosis, vesicles are engulfed by the plasma membrane and then fuse with it, releasing their contents outside the cell. This process is important for the removal of waste products from the cell. It can also be used to release hormones and neurotransmitters

Explanation:

The conversion of a once soil-rich area to an area of little vegetation is called: deforestation. The loss of fertile soils from an area through the action of water or wind is called: desertification. The concept of using natural resources at a rate that does not deplete them is called: sustainable development.

1.) Main phenocrysts and groundmass composition varies by rock type.

2.) Phenocrysts exhibit diverse textures revealing growth history and conditions.

3.) Groundmass texture ranges from fine-grained to glassy, with additional features.

4.) Phenocryst and groundmass phases provide insight into rock's crystallization history.

1.) To identify the main phenocrysts and the groundmass in the thin section, you would need to observe the rock under cross-polarized light. Phenocrysts are larger crystals that are often embedded within a finer-grained groundmass. The specific identification and composition of phenocrysts and groundmass depend on the rock type you are analyzing.

2.) The textures observed in phenocrysts can vary depending on the rock type. They may exhibit crystal shapes, zoning, inclusions, fractures, or other features that provide information about their growth history and environmental conditions.

3.) The textures present in the thin section other than phenocrysts may include the groundmass, which is the finer-grained matrix surrounding the phenocrysts. The groundmass texture can range from fine-grained to glassy, depending on the rock type. Other features such as vesicles, microcrystalline structures, or mineral aggregates may also be observed.

4.) The crystallization history of a rock can be interpreted by studying the relationship between phenocrysts and the groundmass. Phenocrysts generally form earlier than the groundmass, indicating an earlier stage of crystallization. By examining the composition and relative timing of crystal growth, petrologists can infer the cooling and solidification history of the rock.

To learn more about phenocrysts follow the link:

https://brainly.com/question/32631453

#SPJ4

Answer:

B

Explanation:

Acid deposition is the deposition of acidic compounds from the atmosphere to the Earth's surface. It is caused by natural sources like volcanoes and human activities such as burning fossil fuels. Chemical equations include [tex]SO_2[/tex] + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]H_2SO_4[/tex] and NOx + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]HNO_3[/tex]. Acid deposition can be wet or dry, harming ecosystems and causing damage to structures. The effects of acid deposition are far-reaching. It can lead to the acidification of lakes, rivers, and soils, which can harm aquatic ecosystems and affect the growth and survival of plants and animals. Acid deposition can also damage buildings, statues, and monuments made of limestone or marble, as these materials are particularly susceptible to erosion by acids.

Acid deposition refers to the deposition of acidic compounds from the atmosphere onto the Earth's surface.

Sources of acid deposition include natural sources like volcanic emissions and the oxidation of sulfur and nitrogen compounds, as well as human activities like burning fossil fuels.

The chemical equations involved in acid deposition formation are:

  a. Formation of sulfuric acid: [tex]SO_2[/tex] + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]H_2SO_4[/tex]

  b. Formation of nitric acid: NOx + [tex]O_2[/tex] + [tex]H_2O[/tex] → [tex]HNO_3[/tex]

Acid deposition can be classified into two types: wet deposition and dry deposition.

  a. Wet deposition occurs when acidic pollutants dissolve in precipitation and are deposited onto the Earth's surface.

  b. Dry deposition happens when acidic particles and gases settle directly onto the ground or other surfaces without being dissolved in precipitation.

The effects of acid deposition include the acidification of lakes, rivers, and soils, which can harm aquatic ecosystems and affect plant and animal life. It can also cause damage to buildings, statues, and monuments made of limestone or marble.

A visual representation of the sources, formation, and precipitation of acid deposition can be illustrated through a diagram or drawing. This can show the emission sources, chemical reactions, and the deposition of acidic compounds onto the Earth's surface.

For more such questions on Acid deposition click on:

https://brainly.com/question/30433113

#SPJ8

The solitary sea anemone (Anthopleura sola) with stinging cells on tentacles that line its mouth, a polyp with a flower-like appearance, and lives in rocky areas of the sea floor belongs to the class Anthozoa.

Sea anemones are polyps that belong to the phylum Cnidaria, class Anthozoa. They are predatory creatures that catch small fish and shrimp using their tentacles, which are armed with stinging cells called nematocysts.

They are found in oceans all over the world, but they are most common in warm, shallow waters. Sea anemones range in size from a few millimeters to over a meter across. Some species are solitary while others form colonies. They are colorful and beautiful creatures and are frequently kept in saltwater aquariums.

To know more about mouth visit  :

https://brainly.com/question/4895225

#SPJ11

The option that involves a situation in which a density-independent factor influences a population is A major flood washes away vegetation around a river and loads it with sediments and excess nutrients impacting aquatic populations.

Density-independent factors are environmental factors that affect populations regardless of their density. A major flood, as mentioned in the given options, is an example of a density-independent factor because it does not depend on the population density.

The major flood causes a significant impact on the environment, including the aquatic populations, which can lead to a decline in the population density of some species. Chronic wasting disease, invasive honeysuckle bush, and coyotes are density-dependent factors because they influence the population based on the population density.

To know more about population visit  :

https://brainly.com/question/15889243

#SPJ11

The change in the environment would not affect the frequency of the light-colored genetic code in the mouse population.

Frequency of the light-colored genetic code in the mouse population would not be affected by a change in the environment. Light-colored genetic code in the mouse population is determined by genetic makeup and not the environment.

A change in the environment may change the survival rate of the population, however, it does not influence the frequency of the genetic makeup of the population. The genetic makeup of the population can change through genetic drift, mutation, and migration.

To know more about environment visit :

https://brainly.com/question/5511643

#SPJ11

1. Among the options provided, decomposers are pivotal to engineered water pollution control systems, option C is correct.

2. An effect of water pollution is the reduction of dissolved oxygen levels, option A is correct

1. Decomposers play a crucial role in breaking down organic matter, such as pollutants and waste, in aquatic environments. They help in the natural recycling process by decomposing organic pollutants into simpler forms, which reduces their harmful effects on water quality. Decomposers, such as bacteria and fungi, contribute to the breakdown and removal of pollutants, aiding in the restoration and maintenance of a balanced ecosystem within engineered water pollution control systems, option C is correct.

2. Water pollution, particularly from sources like industrial discharge and excessive nutrient runoff, can lead to an overgrowth of algae and other aquatic plants. As these plants die and decompose, they consume oxygen in the water, resulting in a decrease in dissolved oxygen levels. Insufficient dissolved oxygen can harm aquatic organisms, such as fish and other marine life, which depend on oxygen to survive, option A is correct.

To learn more about decomposers follow the link:

https://brainly.com/question/33382684

#SPJ4

The correct question is:

1. Which of the following is pivotal to engineered water pollution control systems?

A. Consumers

B. Producers

C. Decomposers

D, Bottom feeders

2. Which of the following is an effect of water pollution?

A. Reduction of dissolved oxygen level

B. Increase in dissolved oxygen level

C. None of the options provided

D. Stability of dissolved oxygen level