6 foot tall adult casts, a shadow that is 15 feet long estimate the height of a child who cast a 10 foot shadow

a) the journey took 11 hours and 50 minutes.

b)the average speed of the bus was 70.95 km/hour.

c) the cost of fuel for the journey was K240.08.

Distance is the measure of how far apart two objects or points are from each other. It is a scalar quantity, which means it only has magnitude and no direction. Distance is usually measured in units such as meters (m), kilometers (km), feet (ft), miles (mi), or any other appropriate unit of length.

a) convert the times to a 24-hour format to perform the calculation.

07:00 in 24-hour format is 07:00, and 18:50 in 24-hour format is 18:50.

The journey duration is:

18:50 - 07:00 = 11 hours and 50 minutes

Therefore, the journey took 11 hours and 50 minutes.

b) The average speed of the bus can be found by dividing the distance traveled by the time taken:

Average speed = Distance ÷ Time

= 840 km ÷ 11.83 hours (converted from 11 hours and 50 minutes)

= 70.95 km/hour

Therefore, the average speed of the bus was 70.95 km/hour.

c) The fuel consumption rate is 1 liter per 20 km. Therefore, the bus consumed 840 km / 20 = 42 liters of diesel fuel for the journey.

The cost of fuel can be calculated by multiplying the fuel quantity by the cost per liter:

Cost of fuel = Fuel quantity x Cost per liter

= 42 liters x K5.74/liter

= K240.08 (rounded to two decimal places)

Therefore, the cost of fuel for the journey was K240.08.

To know more about direction, visit:

https://brainly.com/question/13899230

#SPJ1

Answer:

3/20

Step-by-step explanation:

To find the product of 2/8 and 3/5, we simply multiply the numerators and the denominators:

(2/8) x (3/5) = (2 x 3) / (8 x 5) = 6/40

We can simplify this fraction by dividing both the numerator and denominator by their greatest common factor, which is 2:

6/40 = (6 ÷ 2) / (40 ÷ 2) = 3/20

Therefore, the product of 2/8 and 3/5 is 3/20.

22π  m²  is the exact surface area of a cylindrical propane tank.

What are volume and surface area?

The entire area of all the faces makes up the surface area of a three-dimensional form. We measure the areas of each face and put them together to determine the surface area of a shape.

                    The surface-area-to-volume ratio, also known as the surface-to-volume ratio or abbreviated as SA:V, refers to how much surface area there is in each unit volume of an object or collection of objects.

A=2πrh+2πr²

 =2π * 1* 10 +2π* 1²

  = 2π( 10 + 1)

  = 2π * 11

  = 22π  m²

Learn more about surface area

brainly.com/question/22074027

#SPJ1

Answer:

Step-by-step explanation:

make them all the same denominator so

the least common denominator for all of them is  24:

1/3 x 8/8=8/24

5/6x4/4=20/24

3/8x3/3=9/24

so from least to greatest it is:

1/3, 3/8, 5/6

Thus, the percentile rank of just an 85 on a test is: 70 percentile for the given test​ scores.

A percentile in statistics refers to a score's position in relation to other scores in a given set. Although percentile has no one fixed meaning, it is frequently described as the proportion of numbers within a collection of data scores that are lower than a particular value.

Percentile shows the proportion of persons who fall below a given value. When we declare that a score of 365 out of 400 represents the 90% percentile on an exam, it means that 90% of test-takers received scores that were lower than or equal to 365.

Give: Seven of the ten test results are inside the 85th percentile.

The percentage of those who received less than or equal to 85 is just as follows: 7/10 = 0.7.

percentile rank:

0.7*100 = 70

Thus, the percentile rank of just an 85 on a test is: 70 percentile for the given test​ scores.

Know more about the Percentile,

https://brainly.com/question/16952576

#SPJ1

The exponential function that describes the amount in the account after time t is:

A(t) = 17509*e^(0.066t).

The balance after 10 years is $39,499.57

The doubling time is approximately 10.48 years.

a) The formula for continuously compounded interest is given by:

A = P*e^(rt)

where A is the amount after time t, P is the principal, r is the annual interest rate (as a decimal), and e is the mathematical constant approximately equal to 2.71828.

In this case, P = $17,509, r = 0.066 (6.6% expressed as a decimal), and t is the time in years. So the exponential function that describes the amount in the account after time t is:

A(t) = 17509*e^(0.066t)

b) To find the balance after 1 year, we plug in t=1:

A(1) = 17509e^(0.0661) ≈ $18,693.68

To find the balance after 2 years, we plug in t=2:

A(2) = 17509e^(0.0662) ≈ $19,971.60

To find the balance after 5 years, we plug in t=5:

A(5) = 17509e^(0.0665) ≈ $25,150.24

To find the balance after 10 years, we plug in t=10:

A(10) = 17509e^(0.06610) ≈ $39,499.57

c) The doubling time is the time it takes for the investment to double in value. We can solve for the doubling time by setting A(t) = 2P and solving for t:

2P = P*e^(rt)

2 = e^(rt)

ln(2) = rt

t = ln(2)/r

Plugging in the values for r and solving, we get:

t = ln(2)/0.066 ≈ 10.48 years

So the doubling time is approximately 10.48 years.

Learn more about interest on

https://brainly.com/question/25793394

#SPJ1

The 18th term of the sequence is -140

It is important to note that the formula for the nth term of an arithmetic sequence is expressed with the equation;

an = a + (n - 1) d

Such that the parameters are enumerated as;

From the information given, we have;

The sequence is;

-21, -14, -7, 0, 7, ...

Then, the common difference = -14 - (-21) = -14 + 21 = -7

Substitute the value

a18 = -21 + (18 - 1) -7

expand the bracket

a18 =-21 + (17)-7

a18 = - 21 - 119

a18 = - 140

Learn about arithmetic sequence at: https://brainly.com/question/6561461

#SPJ1

Answer:

the method of exact differential equations:

We need to check if this differential equation is exact. To do that, we check if the partial derivative of the first term with respect to y is equal to the partial derivative of the second term with respect to x:

∂/∂y(x(x-y)) = x(-1) = -x

∂/∂x(y^2) = 0

Since these partial derivatives are not equal, the differential equation is not exact. We can try to make it exact by multiplying the entire equation by a suitable integrating factor.

Let's find the integrating factor (IF) by taking the partial derivative of the IF with respect to y and equating it to the partial derivative of the second term with respect to x:

∂/∂y(IF) = -y^2/(x(x-y)^2)

∂/∂x(y^2) = 0

From the first equation, we can see that an integrating factor of IF = x(x-y)^2 should make the equation exact. Multiplying the entire equation by this integrating factor, we get:

x(x-y)^2dy + y^2x(x-y)dx = 0

Now, we just need to find a function φ(x,y) such that:

∂φ/∂x = x(x-y)^2dy

∂φ/∂y = y^2x(x-y)dx

Integrating the first equation with respect to x, we get:

φ(x,y) = ∫x(x-y)^2dy + f(x)

φ(x,y) = -1/3(x-y)^3x + f(x)

Now, we differentiate this equation with respect to x and equate it to the second equation:

∂φ/∂x = -(x-y)^3 + f'(x)

∂φ/∂y = y^2(x-y)^3

Comparing the two, we can see that f'(x) = 0, which means that f(x) is a constant. We can choose this constant to be zero without loss of generality.

Therefore, the solution to the differential equation is given by:

-1/3(x-y)^3x + C = 0

where C is an arbitrary constant.

Answer:

[tex]L_c=12.56 \ \text{feet}[/tex]

Step-by-step explanation:

From the question we are told that

Width of circular path [tex]w_c=2 \ \text{feet}[/tex]

Inner Diameter [tex]d_{in}=550 \ \text{feet}[/tex]

Outer diameter [tex]d_{out}=550+2\times2[/tex]  (inner diameter +  2 circular path width)

[tex]d_{out}=550+4[/tex]

[tex]d_{out}=554 \ \text{feet}[/tex]

Generally the equation for inner circumference of the circle  is mathematically given by

[tex]C_1=\pi d_{in}[/tex]

[tex]C_1=3.14\times550[/tex]

[tex]C_1=1727 \ \text{feet}[/tex]

Generally the equation for outer circumference of the circle  is mathematically given by

[tex]C_2=\pi d_{out}[/tex]

[tex]C_2=3.14\times554[/tex]

[tex]C_2=1739.56 \ \text{feet}[/tex]

Generally the difference in length of the two circumference  is mathematically given by

[tex]L_c=C_2-C_1[/tex]

[tex]L_c=1739.56-1727[/tex]

[tex]L_c=12.56 \ \text{feet}[/tex]

The simplified expression for x+2x-8+3x+1-2x is 4x - 4.

Expression is a term used to describe a wide variety of communication methods such as verbal, nonverbal, written, and artistic. It is the way we communicate our thoughts, feelings, and ideas to others. It is an important part of our lives, from the simplest forms of communication like body language to more complex forms like written literature. Expression is a powerful tool for self-expression, communication, and connection.

The expression x+2x-8+3x+1-2x can be simplified by combining like terms.

First, the x-terms can be combined, resulting in 4x:
x + 2x + 3x - 2x = 4x

Next, the remaining constants can be combined, resulting in -4:
4x - 8 + 1 = -4

Finally, the resulting expression can be written as 4x - 4.

Therefore, the simplified expression for x+2x-8+3x+1-2x is 4x - 4.

To know more about expression click-
http://brainly.com/question/1859113
#SPJ1

[tex]\cos(4x)=\cfrac{1}{2}\implies 4x=\cos^{-1}\left( \cfrac{1}{2} \right)\implies 4x= \begin{cases} \frac{\pi }{3}\\\\ \frac{5\pi }{3} \end{cases} \\\\[-0.35em] ~\dotfill\\\\ 4x=\cfrac{\pi }{3}\implies \boxed{x=\cfrac{\pi }{12}}~\hfill 4x=\cfrac{5\pi }{3}\implies \boxed{x=\cfrac{5\pi }{12}}[/tex]

The statement that is NOT one of the axioms of Euclidean geometry is D. If two planes intersect, their intersection is a point.

Euclidean geometry is a branch of mathematics that deals with the study of two-dimensional and three-dimensional figures using a set of axioms or postulates.

The axioms of Euclidean geometry are a set of five statements that are used as the foundation for all of the theorems and proofs in Euclidean geometry.

The first two axioms are relatively straightforward and intuitive, while the third axiom involves the use of circles to construct geometric figures. The fourth axiom establishes the concept of a right angle, which is a 90-degree angle, while the fifth axiom deals with the concept of parallel lines and their relationship to intersecting lines.

Find out more on Euclidean geometry at https://brainly.com/question/31120908

#SPJ1

Answer:

the definition of adjacent mathematically means two angles if they have a common side and a common vertex.

Step-by-step explanation:

a would b adjacent to d. c would be adjacent to d.

Lines I and P can be considered parallel if they have the same slope, and ABC and CEF can be considered similar if they have the same size, but not necessarily the same shape.

Angle is a two-dimensional figure formed by two rays, called the sides of the angle, sharing a common endpoint, called the vertex of the angle. An angle is measured in degrees, which are represented by the symbol °. The size of an angle is determined by the amount of rotation between the two rays, with the vertex being the point of rotation. Angles can be described as acute, obtuse, right, reflex, straight and full.

A) The slope of line I is equal to the slope of line P. - True. If two lines have the same slope, they are parallel.

B) ABC is congruent to CEF - False. Congruent shapes have the same size and same shape. ABC and CEF are not necessarily the same size or shape.

C) Lines I and P are parallel - True. If two lines have the same slope, they are parallel.

D) ABC is similar to CEF - True. Similar shapes have the same size, but not necessarily the same shape.

E) Sin (A) = Sin (C) - False. The sine of an angle is only equal to the sine of another angle if they are the same angle.

F) Sin (B) = cos (F) - False. The sine of an angle is not equal to the cosine of another angle.

In conclusion, lines I and P can be considered parallel if they have the same slope, and ABC and CEF can be considered similar if they have the same size, but not necessarily the same shape. However, the sine of an angle is only equal to the sine of another angle if they are the same angle, and the sine of an angle is not equal to the cosine of another angle.

To know more about angle click-
https://brainly.com/question/25716982
#SPJ1

In linear equation, 1161.8 lb is the total weight of the liquid in the tank, to the nearest full pound.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation.

                         Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables. Equations with power 1 variables are known as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

d = 12 ft

r = 12 ft/2 = 6 ft

volume of sphere = (4/3)πr³

volume of hemisphere = (1/2)(4/3)πr³

volume = (2/3)π(6 ft³) =  12.56 ft³

weight = volume × density

weight = 12.56 ft³ × 92.5 lb/ft³

weight = 1161.8 lb

Learn more about Linear equation

brainly.com/question/11897796

#SPJ1

Answer:

Step-by-step explanation:

According to the question we are given with a right traingle Where base is 35 and the perpendicular is 12.

We need to find the unknown side that is the longest side (Hypotenuse) .

By using pythagoras theorem :

[tex]\longrightarrow \rm \: \: (H)^2 = (B)^2 + (P)^2 \\ [/tex]

here,

Putting the required values in the Pythagoras theorem we will get,,

[tex]\longrightarrow \rm \: \: (H)^2 = (35)^2 + (12)^2 \\ \\ \longrightarrow \rm \: \:(H)^2 =1225 + 144 \\ \\ \longrightarrow \rm \: \:(H)^2 = 1369 \\ \\ \longrightarrow \rm \: \:H = \sqrt{1369} \\ \\ \longrightarrow \rm \: \:H = 37 \\ [/tex]

Therefore, Unknown side of the right triangle i.e hypotenuse is 37 .

The inverse of the linear function, f(x), f(x) = (2x - 3)/5 is f⁻¹(x) = (5·x + 3)/2. The correct option is option A

A. f⁻¹(x) = (5·x + 3)/2

The inverse of a function is a function that reverses the effect the original function.

The original function is; f(x) = (2·x - 3)/5

The inverse of f(x) can therefore be found by making x the subject of the equation as follows;

f(x) = (2·x - 3)/5

5 × f(x) = (2·x - 3)

5 × f(x) + 3 = 2·x

2·x = 5 × f(x) + 3

x = (5 × f(x) + 3)/2

Plugging in x = f⁻¹(x) and f(x) = x, in the above equation, we get;

f⁻¹(x) = (5 × x + 3)/2

The correct option that is an inverse of f(x) is therefore, option A

Learn more on the inverse of a function here: https://brainly.com/question/29652632

#SPJ1

The function m(t) shifts the time frame by 1hr later the original function d(t).

The function s can be written in terms of d as follows:

s (r) = d ×  [tex](r+7)^{-1}[/tex]

The core concept of calculus in mathematics is a function. The relations are certain kinds of the functions. In mathematics, a function is a rule that produces a different result for every input x. In mathematics, a function is represented by a mapping or transformation. Letters like f, g, and h are widely used to indicate these operations.

In this situation, d (5) = 0.25 means that Tyler is 0.25 minutes away from his home at 7:05am. This is because Tyler's distance from his house at time t after 7am is provided by the function d (t).

Tyler's school starts at 9 a.m. with a 120-minute delay. As a result, if d (5) = 0.25, Tyler has walked for 5 minutes, and his distance function s (r) calculates his distance starting at 7 minutes after 7 a.m. with a 120-minute start delay. The matching point, then, indicates Tyler's separation from his home at 7 minutes after 9 a.m. If he started walking at 7 am and took 5 minutes.

The function s can be written in terms of d as follows:

s (r) = d ×  [tex](r+7)^{-1}[/tex]

To know more about functions, visit:

https://brainly.com/question/12431044

#SPJ1

Answer:

f(x) = 3x-5

Step-by-step explanation:

Plug in the domain 0, in the other answer options

f(x) = -3x + 4 turns into f(x) = -3(0) + 4 and thats equal to 4, there is no value set to 4 in the range so that option is cancelled out

f(x) = x+2 turns into f(x) = 0+2 =2, there is no value set to 2 in the range so that option is cancelled out

f(x) = -5x + 3 turns into f(x) = -5(0) + 3, and thats equal to 3, there is no value set to 3 in the range so that option is cancelled out

f(x) = 3x-5 turns into f(x) = 3(0) - 5, and thats equal to -5, there is a value in the range that equals -5, you could also try any domain value into this equation and it would result into either -11, -5, 1, 7, or 13.

keep in mind f(x) is the range

Answer:

101 = k + 33

101 - 33 = k + 33 - 33

68 = k

this is your required answer

Step-by-step explanation:

Rate A = 1 pool / 4 hrs = 1/4 pool/hr

Rate B = 1 pool / 5 hrs = 1/5 pool / hr

Now combine the rates to fill 1 pool

1 pool / ( 1/4 pool/hr + 1/5 pool / hr) = 1 / ( 1/4 + 1/5)  hr = 2.22 hrs

  ( or  2 hrs 13.3 min)

Answer:

8^2

Step-by-step explanation:

Answer: >

Step-by-step explanation:

The probability that at least 4 accounting majors are on the committee is E. 0.5874.

Probability operates on the principle of dividing the number of expected outcomes by the number of total outcomes. To find the probability that at least 4 accounting majors are on the committee, we can begin by determining the probability of having exactly 4, 5, 6, and 7 accounting majors on the committee. After finding these probabilities, we can then sum up the figures.

First, the total number of ways to choose 8 members from a group of 6+7=13 is:

13! / (8! * 5!) = 1287

Next, we will find the number of ways to choose exactly 4 accounting majors and 4 finance majors is:

6 choose 4 * 7 choose 4 = 15 * 35 = 525

Also, the number of ways to choose exactly 6 accounting majors and 2 finance majors is:

6 choose 6 * 7 choose 2 = 1 * 21 = 21

Finally, the number of ways to choose exactly 7 accounting majors and 1 finance major is:

6 choose 7 * 7 choose 1 = 0 * 7 = 0

Now, we will sum the total number of ways to choose a committee with at least 4 accounting majors as follows:

525 + 210 + 21 + 0 = 756

756 / 1287 = 0.587

Therefore, the probability of selecting a minimum of 4 accounting majors is thus 0.5874.

Learn more about probability here:

https://brainly.com/question/24756209

#SPJ1

The angle ∠FNL in the given trapezium shows that ∠FNL is 122°

The opposite angles of a trapezium are not necessarily equal, unlike in a parallelogram.

However, the opposite angles of a trapezium are supplementary, which means that the sum of one pair of opposite angles equals 180 degrees.

In other words, if we label the angles of a trapezium as F, D, N, and L (with F and L being opposite angles, and D and N being opposite angles), then we have:

∠F + ∠L = 180 degrees

∠D + ∠L = 180 degrees

Thus, ∠FDL + ∠FNL = 180

4x - 14 + 9x - 40 = 180

13x - 54 = 180

13x = 234

x = 18

∠FNL = 9x - 40

∠FNL = 9(18) - 40

∠FNL = 122°

Learn more about opposite angles of trapezium here:

https://brainly.com/question/21798497

#SPJ1

Equation in the standard slope-intercept form: y = 2X + 2

The slope intercept form of an equation is represented as follows:

y = mx + c

where, m = slope, c = y-intercept

We want to rewrite the equation X = (y - 2) ÷ 2 in slope-intercept form, which is in the form y = mx + b, where m is the slope and b is the y-intercept.

First, let's isolate y on one side of the equation by multiplying both sides by 2:

2X = y - 2

Next, let's add 2 to both sides:

2X + 2 = y

Finally, let's switch the sides to get the equation in the standard slope-intercept form:

y = 2X + 2

So the slope of the line is 2 and the y-intercept is 2.

To know more about slope-intercept form visit,

https://brainly.com/question/1884491

#SPJ1

From the given answer choices, the equation that shows work being calculated with the correct unit is C. 113J = (17.4N) x (6.51m)

In physics, work is defined as the amount of energy transferred by a force when it causes an object to move over a certain distance. Work is a scalar quantity and is expressed in units of joules (J) or foot-pounds (ft-lbs).

Mathematically, work (W) is given by the product of the force (F) applied on an object and the displacement (d) of the object in the direction of the force, as expressed in the formula:

W = F * d * cos(theta)

where theta is the angle between the force vector and the displacement vector.

Thus, the correct units which are Joules, metres and Newton are used.

Read more about work done here:

https://brainly.com/question/8119756

#SPJ1