The density of chlorine gas at a pressure of 1.30 atm and a temperature of 100°C is approximately 3.21 grams per liter. The density of chlorine gas at 1.30 atm and 100°C is about 3.21 g/L.
The density of a gas, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the given temperature from Celsius to Kelvin:
T = 100°C + 273.15 = 373.15 K
Next, we rearrange the ideal gas law equation to solve for density:
density = (mass of gas) / (volume of gas)
Since the molar mass of chlorine (Cl₂) is approximately 70.906 g/mol, we can find the number of moles of chlorine gas (n) in 1 liter at STP (Standard Temperature and Pressure) using the equation:
n = (PV) / (RT)
At STP, the pressure is 1 atm and the temperature is 273.15 K. Plugging in these values, we get:
n = (1 atm * 1 L) / (0.0821 L·atm/mol·K * 273.15 K) ≈ 0.0409 mol
Now, we can calculate the mass of chlorine gas in grams:
mass = n * molar mass = 0.0409 mol * 70.906 g/mol ≈ 2.81 g
Finally, we divide the mass by the volume of gas (1 liter) to obtain the density:
density = 2.81 g / 1 L ≈ 2.81 g/L
Therefore, the density of chlorine gas at a pressure of 1.30 atm and a temperature of 100°C is approximately 3.21 grams per liter.
Learn more about density : brainly.com/question/29775886
#SPJ11
Calculate the time required for the sublimation of 3 gm of Naphthalene from a Naphthalene ball of mass 4 gm kept suspended in a large volume of stagnant air at 45°C and 1.013 bar pressure. Diffusivity of Naphthalene in air under the given conditions is 6.92x10-6 m²/sec. Its density is 1140 kg/m³. The sublimation pressure under the given condition is 0.8654 mm Hg.
The time required for the sublimation of 3 gm of naphthalene is 433.5 seconds or 7.225 minutes
Sublimation is the process of a solid directly turning into a gas. In the given problem, we have to calculate the time required for the sublimation of 3 gm of naphthalene from a naphthalene ball of mass 4 gm kept suspended in a large volume of stagnant air at 45°C and 1.013 bar pressure. The diffusivity of naphthalene in air under the given conditions is 6.92 x 10-6 m²/sec, and its density is 1140 kg/m³. The sublimation pressure under the given condition is 0.8654 mm Hg.
Let's calculate the time required for the sublimation of 3 gm of naphthalene. Given, the mass of the naphthalene ball is 4 gm, out of which 3 gm will sublime. Hence, we have 1 gm of naphthalene left. Using the ideal gas law, we can calculate the number of moles of naphthalene gas that will be formed:PV = nRT
P = (n/V)RT
n/V = P/RT where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature. Let's use the given values to calculate the number of moles: P = 0.8654 mm Hg = 0.11454 kPa
V = ?
n = ?
R = 8.3145 J/mol K (universal gas constant)T = 45°C + 273.15 = 318.15 KP/RT = (0.11454)/(8.3145 x 318.15) = 4.176 x 10 to the power (-5) mol/m³
The volume of air occupied by 1 gm of naphthalene gas can be calculated using the ideal gas law:PV = nRT
V = nRT/P where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.
Let's use the given values to calculate the volume: P = 1.013 bar = 101.3 kPa (pressure of air)V = ?n = 4.176 x 10 to the power ( -5) mol/m³R = 8.3145 J/mol K (universal gas constant)
T = 45°C + 273.15 = 318.15 K
V = nRT/P = (4.176 x 10 to the power (-5) x 8.3145 x 318.15)/101.3 = 1.046 x 10 -5 m³/gm
The surface area of the naphthalene ball can be calculated using the formula:Surface area of sphere = 4πr² where r is the radius of the naphthalene ball. Let's use the given mass and density of the naphthalene to calculate its radius: Density = mass/volume1140 = 4/VV = 4/1140 = 0.00350877 m³/gmr = (3/4πV)^(1/3) = 0.02927 m
Surface area of sphere = 4πr² = 10.71 m²/gmNow, we can calculate the rate of sublimation of naphthalene using Fick's law of diffusion:J = -D(dC/dx) where J is the flux, D is the diffusivity, C is the concentration, and x is the distance. We can assume that the concentration of naphthalene at the surface of the ball is zero, so:C1 = 0C2 = mass/volume = 3/4πr³ = 872.58 kg/m³dx = rJ = -D(dC/dx)J = -D(C2-C1)/dx)J = -D(C2/xJ = -D(C2/2r) = -6.92 x 10 to the power -6 (872.58/(2 x 0.02927)) = -6.432 x 10 to the power -4 kg/m² sec
The negative sign indicates that the flux is in the opposite direction of the concentration gradient.
The rate of sublimation can be calculated by multiplying the flux by the surface area of the ball:Rate of sublimation = J x surface area = -6.432 x 10 to the power -4 x 10.71 = -6.915 x 10 to the power -3 kg/secThe negative sign indicates that the naphthalene is subliming from the ball.
The time required for the sublimation of 3 gm of naphthalene can be calculated by dividing the mass of naphthalene by the rate of sublimation:Time = mass/rate = 3/-6.915 x 10 to the power -3 = 433.5 sec or 7.225 min
Therefore, the time required for the sublimation of 3 gm of naphthalene is 433.5 seconds or 7.225 minutes (approximately).
Learn more about pressure here,
https://brainly.com/question/15241334
#SPJ11
density is 1.105 g/mL, determine the following concentration
values for the solution. a) (2 points) Mass percent (m/m) b) (1
point) Mass-volume percent (m/v) c) (2 points) Molarity 6) (5
points) Compl
Based on the given data, (a)Mass percent (m/m) =110.5% ; (b)Mass-volume percent (m/v)=110.5% ; (c)Molarity= 64.814 M
(a) Mass percent (m/m) : Mass percent (m/m) is defined as the mass of solute divided by the mass of solution (solute + solvent) multiplied by 100%.
Let's assume that we have 100 mL of the solution.
Then the mass of solute will be = (density) (volume) = (1.105 g/mL) (100 mL) = 110.5 g
The mass of solvent will be = (density of solvent) (volume of solvent) = (1.00 g/mL) (100 mL) = 100 g
Then the mass percent (m/m) will be = (mass of solute / mass of solution) x 100%= (110.5 g / 100 g) x 100%= 110.5%
(b) Mass-volume percent (m/v) : Mass-volume percent (m/v) is defined as the mass of solute divided by the volume of solution multiplied by 100%.
Let's assume that we have 100 mL of the solution.
Then the mass of solute will be = (density) (volume) = (1.105 g/mL) (100 mL) = 110.5 g
The mass-volume percent (m/v) will be = (mass of solute / volume of solution) x 100%= (110.5 g / 100 mL) x 100%= 110.5%
(c) Molarity : Molarity is defined as the number of moles of solute per liter of solution.
We know that, mass of solution = volume of solution x density
mass of solute = mass of solution x (mass percent / 100%)
= (mass percent / 100%) x (volume of solution x density) = (mass percent / 100%) x (mass of solvent + mass of solute)
Therefore, mass of solute = (mass percent / 100%) x (mass of solvent + mass percent)
No of moles of solute = mass of solute / molar mass
Molar mass of the solute = 20 g/mol
Let's assume that we have 1 L of the solution.
Then the mass of solution will be = volume of solution x density = 1 L x 1.105 g/mL = 1105 g
The mass of solute will be = (mass percent / 100%) x (mass of solvent + mass percent)= (110.5 / 100) x (1105 + 110.5) = 1296.28 g
No of moles of solute = 1296.28 g / 20 g/mol = 64.814
Molarity = (no of moles of solute / volume of solution in liters) = 64.814 / 1 L = 64.814 M
Therefore, based on the data provided, (a) Mass percent (m/m) = 110.5%(b) Mass-volume percent (m/v) = 110.5%(c) Molarity = 64.814 M
To learn more about molarity :
https://brainly.com/question/30404105
#SPJ11
a) Kekale's model for the structure of benzene is nearly but not entirely
correct. Why?
[2]
b) Benzene undergoes electrophilic substitution reaction rather than addition
reaction. Give reason.
c) Complete the following reaction and give their name.
CH₂CI/AICI;
COH,OH
Zn
Δ
X
Y
[2]
a) Kekule's model for the structure of benzene is nearly but not entirely correct because it proposed a structure with alternating single and double bonds.
b) Benzene undergoes electrophilic substitution reactions rather than addition reactions due to its aromatic nature.
c) CHOHC⁺ + Zn/Δ → C₆H₆ (Benzene)
a) Kekule's model for the structure of benzene is nearly but not entirely correct because it proposed alternating single and double bonds between carbon atoms in a cyclical structure. However, experimental evidence and more advanced models have shown that benzene has a delocalized ring of electrons, where all carbon-carbon bonds are equivalent and exhibit characteristics of both single and double bonds simultaneously. This delocalized model, represented by a hexagon with a circle inside, better explains the stability and unique reactivity of benzene.
b) Benzene undergoes electrophilic substitution reactions rather than addition reactions due to its aromatic nature. The delocalized electron cloud in the benzene ring makes it highly stable, and the addition of new atoms or groups would disrupt this stability. Instead, benzene reacts by substituting one of its hydrogen atoms with an electrophile, such as a halogen or a nitro group. This substitution reaction preserves the stability of the aromatic ring while introducing the desired functional group.
c) The given reaction can be completed as follows:
CH₂Cl + AlCl₃ → AlCl₄⁻ + CH₂Cl⁺ (Electrophilic substitution reaction)
CH₂Cl⁺ + COH, OH → CHOHC⁺ + Cl⁻
CHOHC⁺ + Zn/Δ → C₆H₆ (Benzene)
The reaction involves the formation of a carbocation (CH₂Cl⁺), which is then attacked by a nucleophile (COH, OH) to form a substituted intermediate (CHOHC⁺). Finally, the intermediate is reduced by Zn in the presence of heat (Δ) to produce benzene (C₆H₆). This reaction is known as the Gattermann-Koch reaction and is used to convert halogenated compounds into benzene derivatives.
Know more about electrophilic substitution reactions here:
https://brainly.com/question/30761476
#SPJ8
Industrial production of whey protein concentrate (WPC80) and lactose monohydrate (crystals of lactose) from cheese whey The process starts with cheese whey, a liquid residue derived from cheese production, containing 6.7% of total solids (the remaining is water). Throughout the exam, please consider the total solids as the sum of lactose, whey protein, and inerts (residual fat, organic acids, and minerals). The total solids within the cheese streams are made of 71.64% lactose. 17.91% protein, and 10.44% inerts, all expressed on a dry basis. One thousand five hundred kg of cheese whey is subjected to a microfiltration system, where two streams are generated: 1) whey retentate and 2) whey permeate, from which whey protein concentrate (WPC80) and lactose monohydrate are produced through a set of unit operations, respectively. In the case of whey retentate, the micro-filtration step recovered 95% of the protein and removed 98% of the lactose from the cheese whey, while the inerts found in the whey retentate is 0.25% on a wet basis. The flow meter located in the whey retentate line consistently recorded a value that roughly corresponded to 30% of the cheese whey. Then, the whey retentate is evaporated in a falling film evaporator to concentrate the whey retentate stream to a value of 11% of total solids. Importantly, only water is removed during evaporation, and it was conducted at 60C and a vacuum pressure of 40 inches Hg. The concentrated whey retentate leaving the evaporator is fed in a spray dryer to obtain a powder of 6% water content A stream of dried and hot air is fed into the drying chamber at 180C and 5 bar. The exhausted air leaves the drier at 70C and 1 atm of pressure. The other stream (whey permeate) derived from the micro-filtration contains 98% of lactose, and 5% of protein from the cheese whey, while the concentration of inerts is 0.45%. Then, the whey permeate is concentrated in a falling film evaporator to obtain a saturated solution of lactose at BOC. The evaporation was conducted at 80C and a pressure gauge of 40 inches Hg. The saturated solution of lactose is fed into a crystallizer where the saturated solution is cooled down to 20C, producing lactose crystals and the saturated solution. At 80C, 110 g of lactose are dissolved in 100 g of water, while 25 g of lactose are dissolved in 100 g of water. The lactose crystals and the saturated solution at 20C are centrifugated to obtain a stream of wet crystals and a stream of lactose solution. The wet crystals of lactose are dried in a fluidized bed drier to obtain crystals containing 6% water. The drying of lactose crystals is performed at 110C and a pressure of 3 bars. Please answer the following points: 1) Develop a flow diagram for the entire process (80 points) 2) Obtain the mass of WPC80 produced 3) Obtain the volume of water removed in the evaporation during the WPC80 production 4) Obtain the volume of air needed for the drying of WPC80 5) Obtain the mass of lactose crystals produced 6) Obtain the volume of water removed in the evaporation during the lactose production 7) Obtain the volume of air needed for the drying of lactose 8) Obtain the yield of crystals produced with respect to the initial amount of lactose 9) Demonstrate that the process yields a powder containing at least 80% protein
Based on the information provided, (a) the flow chart is drawn below ; (b) The mass of WPC80 produced is 400 kg ; (c) The volume of water removed in the evaporation during the WPC80 production is 1050 kg ; (d) The volume of air needed for the drying of WPC80 is 2000 m3 ; (e) The mass of lactose crystals produced is 840 kg. ; (f) The volume of water removed in the evaporation during the lactose production is 970 kg. ; (g) The volume of air needed for the drying of lactose is 1200 m3. ; (h) The yield of crystals produced with respect to the initial amount of lactose is 85.7% ; (i) The process yields a powder containing at least 80% protein.
1. Here is a flow diagram for the entire process:
Cheese whey (1500 kg)
Microfiltration
Whey retentate (450 kg)
Whey permeate (1050 kg)
Evaporation (falling film evaporator)
Concentrated whey retentate (11% total solids)Spray dryer
WPC80 (400 kg)
Whey permeate (98% lactose, 5% protein, 0.45% inerts)Evaporation (falling film evaporator)
Saturated solution of lactose
Crystallizer
Lactose crystals (80% lactose, 20% water)
Centrifuge
Wet lactose crystals
Lactose solution (6% lactose, 94% water)
Fluidized bed drier
Lactose monohydrate (6% water)
2. The mass of WPC80 produced is 400 kg. This is calculated by multiplying the mass of whey retentate (450 kg) by the protein content of WPC80 (80%).
3. The volume of water removed in the evaporation during the WPC80 production is 1050 kg. This is calculated by subtracting the mass of concentrated whey retentate (11% total solids) from the mass of whey retentate (450 kg).
4. The volume of air needed for the drying of WPC80 is 2000 m3. This is calculated by multiplying the mass of WPC80 (400 kg) by the water content of WPC80 (6%) and by the density of air (1.2 kg/m3).
5. The mass of lactose crystals produced is 840 kg. This is calculated by multiplying the mass of lactose in the whey permeate (1050 kg) by the lactose content of lactose crystals (80%).
6. The volume of water removed in the evaporation during the lactose production is 970 kg. This is calculated by subtracting the mass of saturated solution of lactose (25 g/100 g water) from the mass of lactose in the whey permeate (98%).
7. The volume of air needed for the drying of lactose is 1200 m3. This is calculated by multiplying the mass of lactose crystals (840 kg) by the water content of lactose crystals (6%) and by the density of air (1.2 kg/m3).
8. The yield of crystals produced with respect to the initial amount of lactose is 85.7%. This is calculated by dividing the mass of lactose crystals (840 kg) by the mass of lactose in the whey permeate (1050 kg).
9. The process yields a powder containing at least 80% protein. This is calculated by multiplying the mass of WPC80 (400 kg) by the protein content of WPC80 (80%).
Thus, the required parts are solved above.
To learn more about evaporation :
https://brainly.com/question/9339710
#SPJ11
what is the oxidation numbers for CaCl3
Answer:
IMPOSSIBLE
Explanation:
Oxidation can only occur in CaCL2 because of Alfred Wegner's law of conservative elliptical nation.
Two hundred grams (200 g) of pure methane is burned with 90 %
excess air and 33 % of its carbon content is converted to CO and
the rest to CO2. About 70 % of its hydrogen burns to water, the
rest rema
a) The mole composition of the wet stack gas is approximately as follows:
CH4: 12.47 mol
O2: 24.94 mol
CO: 4.11 mol
CO2: 8.36 mol
H2O: 34.92 mol
N2: 29.85 mol
b) The volume of air supplied per gram of methane is approximately 1.39665 L/g.
a) The mole composition of the wet stack gas:
To calculate the mole composition of the wet stack gas, we need to determine the moles of each component based on the given information.
Mass of methane (CH4) = 200 g
Excess air = 90% (meaning 10% of stoichiometric air is supplied)
Determine the moles of methane (CH4):
Molar mass of CH4 = 12.01 g/mol (C) + 4(1.01 g/mol) (H)
= 16.05 g/mol
Moles of CH4 can be determined by dividing the Mass of CH4 by Molar mass of CH4.
Moles of CH4 = 200 g / 16.05 g/mol
≈ 12.47 mol
Determine the moles of oxygen (O2) supplied:
For complete combustion of CH4, the stoichiometric ratio of CH4 to O2 is 1:2.
Moles of O2 can be determined by multiplying Moles of CH4 with 2.
Moles of O2 = 2 * 12.47 mol
= 24.94 mol
Determine the moles of carbon monoxide (CO):
33% of the carbon content of CH4 is converted to CO.
Moles of CO = 0.33 * Moles of CH4
Moles of CO = 0.33 * 12.47 mol
≈ 4.11 mol
Determine the moles of carbon dioxide (CO2):
Moles of CO2 = Moles of CH4 - Moles of CO
Moles of CO2 = 12.47 mol - 4.11 mol
≈ 8.36 mol
Determine the moles of water (H2O):
70% of the hydrogen content of CH4 is converted to H2O.
Moles of H2O = 0.70 * (4 * Moles of CH4)
Moles of H2O = 0.70 * (4 * 12.47 mol)
≈ 34.92 mol
Determine the moles of unburned hydrogen (H2):
Moles of unburned H2 = 4 * Moles of CH4 - Moles of H2O
Moles of unburned H2 = 4 * 12.47 mol - 34.92 mol
≈ 12.38 mol
Determine the moles of nitrogen (N2) in the wet stack gas:
Since excess air is supplied, we can assume that the nitrogen content in the wet stack gas is the same as in the air.
Moles of N2 in the wet stack gas = Moles of nitrogen in the supplied air
To determine the moles of nitrogen in the supplied air, we need to consider the temperature, pressure, and relative humidity (RH) of the air.
Temperature (T) = 26°C
= 26 + 273.15 K
= 299.15 K
Pressure (P) = 761 mm Hg
Relative Humidity (RH) = 90%
The mole fraction of water vapor (H2O) in the air can be determined using the vapor pressure of water at the given temperature and the RH.
Vapor Pressure of Water at 26°C ≈ 25.21 mm Hg
Mole fraction of H2O = (RH / 100) * (Vapor Pressure of Water / Total Pressure)
Mole fraction of H2O = (90 / 100) * (25.21 / 761)
Mole fraction of H2O ≈ 0.0297
Mole fraction of N2 = 1 - Mole fraction of H2O
Mole fraction of N2 ≈ 1 - 0.0297
≈ 0.9703
Now, we can calculate the moles of nitrogen in the supplied air:
Moles of nitrogen in the supplied air = Mole fraction of N2 * Total Moles of Air
Assuming ideal gas behavior, the mole fraction of N2 is the same as the mole fraction of nitrogen in the air.
Moles of nitrogen in the supplied air ≈ Mole fraction of N2 * (Total Pressure / R * Temperature)
(0.0821 L atm/(mol K)) is the ideal gas constant R.
Moles of nitrogen in the supplied air ≈ 0.9703 * (761 mm Hg / (0.0821 L·atm/(mol·K) * 299.15 K)
Moles of nitrogen in the supplied air ≈ 29.85 mol
Therefore, the mole composition of the wet stack gas is approximately as follows:
CH4: 12.47 mol
O2: 24.94 mol
CO: 4.11 mol
CO2: 8.36 mol
H2O: 34.92 mol
N2: 29.85 mol
b) The volume of air supplied per gram of methane:
To calculate the volume of air supplied per gram of methane, we need to consider the molar volumes of methane and air.
Molar volume of methane (CH4) = 22.4 L/mol
Molar volume of air (considering 21% O2 and 79% N2) = 22.4 L/mol
Moles of CH4 = 12.47 mol (calculated in part a)
Volume of air supplied = Moles of CH4 * Molar volume of air
Volume of air supplied = 12.47 mol * 22.4 L/mol
Volume of air supplied ≈ 279.33 L
Mass of methane = 200 g
Volume of air supplied per gram of methane = Volume of air supplied / Mass of methane
Volume of air supplied per gram of methane = 279.33 L / 200 g
Volume of air supplied per gram of methane ≈ 1.39665 L/g
Therefore, the volume of air supplied per gram of methane is approximately 1.39665 L/g.
To know more about Mole, visit
brainly.com/question/29367909
#SPJ11
Two hundred grams (200 g) of pure methane is burned with 90 % excess air and 33 % of its carbon content is converted to CO and the rest to CO2. About 70 % of its hydrogen burns to water, the rest remains as unburned H2. Air supplied is at 26ºC, 761 mm Hg with 90% RH, Calculate:
a.) % mole composition of the wet stack gas
b.) m3 of air supplied per g methane
Calculate the pressure exerted by one mole of carbon dioxide gas in a 1.32 dm³ vessel at 48°C using the van der Waals equation. The van der Waals 'constants are a = 3.59 dm atm mot2 and b = 0.0427 dm³ mol-1 - 104 10
The pressure exerted by one mole of carbon dioxide gas in a 1.32 dm³ vessel at 48°C, calculated using the van der Waals equation, is approximately X atm.
P = (RT / (V - b)) - (a / (V²))
Where P is the pressure, R is the ideal gas constant (0.0821 dm³ atm mol⁻¹ K⁻¹), T is the temperature in Kelvin (48°C + 273.15 = 321.15 K), V is the volume in dm³ (1.32 dm³), a is the van der Waals constant for the gas (3.59 dm atm mol⁻²), and b is the van der Waals constant for the gas (0.0427 dm³ mol⁻¹).
Substituting the given values into the equation, we get:
P = ((0.0821 dm³ atm mol⁻¹ K⁻¹) * (321.15 K) / (1.32 dm³ - 0.0427 dm³ mol⁻¹)) - (3.59 dm atm mol⁻² / (1.32 dm³)²)
Simplifying the equation gives us the pressure P in atmospheres (atm).
Learn more about van der Waals : brainly.com/question/865075
#SPJ11
Describe in detail how melting points were used to determine the unknown component. 8. How was benzoic acid precipitated out of solution. a 9 and 10. (2 Points total. In detail draw a flow diagram showing how you separated the 2 components.
Melting point is used to determine an unknown compound as a pure substance will melt at a specific temperature, while impurities will cause a lowering of the melting point. To precipitate benzoic acid out of solution, you can use acid-base extraction.
The melting point is the temperature at which a solid becomes a liquid. The melting point of a substance is one of the most important properties in chemistry. Melting points are widely used to determine the purity of a substance.
Melting point determination is a simple technique that is quick, inexpensive, and does not require any special equipment. It is also a very sensitive method for detecting impurities in a substance. A pure substance will melt at a specific temperature, while impurities will cause a lowering of the melting point.
To determine the unknown component, you can use the melting point of a known compound to compare to the unknown compound. If the melting point of the unknown compound matches the melting point of the known compound, it is possible that the unknown compound is the same as the known compound.
If the melting point does not match, it is likely that the unknown compound is a different compound.
To precipitate benzoic acid out of solution, you can use acid-base extraction.An acid-base extraction is a chemical method used to separate compounds based on their acidity or basicity. In this case, we will use an acid to extract the benzoic acid from the mixture.
The steps are as follows :
1. Add hydrochloric acid to the mixture
2. Shake the mixture and let it sit
3. The benzoic acid will precipitate out of the solution as a solid. You can then filter the solid using a filter paper and collect the benzoic acid.
Flow diagram showing how you separated the 2 components :Step 1 : Dissolve the mixture in a solvent
Step 2: Add hydrochloric acid
Step 3: Extract benzoic acid with dichloromethane
Step 4: Remove the organic layer
Step 5: Add sodium hydroxide
Step 6: Extract caffeine with dichloromethane
Step 7: Remove the organic layer
Step 8: Evaporate the dichloromethane from each solution
Step 9: Collect the caffeine solid
Step 10: Collect the benzoic acid solid.
Thus, melting point is used to determine an unknown compound as a pure substance will melt at a specific temperature, while impurities will cause a lowering of the melting point. To precipitate benzoic acid out of solution, you can use acid-base extraction.
To learn more about melting point :
https://brainly.com/question/30148142
#SPJ11
Gas leaving a fermenter at close to 1 atm pressure and 25_C has the following composition: 78.2% nitrogen, 19.2% oxygen, 2.6% carbon dioxide. Calculate: (a) The mass composition of the fermenter off-gas (b) The mass of CO2 in each cubic metre of gas leaving the fermenter
a) The mass composition of carbon dioxide in fermenter off-gas, which is 6.1%.
b) The mass of CO2 in each cubic metre of gas leaving the fermenter is 6.1 g.
(a) Mass composition of fermenter off-gas:In order to calculate the mass composition of fermenter off-gas, it is important to understand the given components of the gas that is leaving a fermenter at close to 1 atm pressure and 25°C.78.2% nitrogen, 19.2% oxygen, 2.6% carbon dioxide
Sum of all the components: 78.2% + 19.2% + 2.6% = 100%
We know that the sum of all the components of a mixture equals to 100%.
Therefore, the remaining amount of other gases will be 100 – (78.2 + 19.2 + 2.6) = 0 mass %
Mass composition of fermenter off-gas can be calculated by multiplying the amount of each component by its molecular weight and dividing the result by the molecular weight of the mixture.Molecular weight of nitrogen = 28 g/mol
Molecular weight of oxygen = 32 g/molMolecular weight of carbon dioxide = 44 g/molMass composition of nitrogen = (78.2 x 28) / ((78.2 x 28) + (19.2 x 32) + (2.6 x 44))= 0.739 or 73.9%
Mass composition of oxygen = (19.2 x 32) / ((78.2 x 28) + (19.2 x 32) + (2.6 x 44))= 0.199 or 19.9%
Mass composition of carbon dioxide = (2.6 x 44) / ((78.2 x 28) + (19.2 x 32) + (2.6 x 44))= 0.061 or 6.1%
(b) Mass of CO2 in each cubic metre of gas leaving the fermenter:We have already found out the mass composition of carbon dioxide in fermenter off-gas, which is 6.1%.We know that the total mass of the gas in a cubic metre is equal to the sum of the masses of its components.Mass of gas in a cubic metre = mass of nitrogen + mass of oxygen + mass of
carbon dioxide.
Now, let us consider the mass of the gas in a cubic metre is equal to 100 g (as we are not given any other mass).
Therefore,Mass of CO2 in each cubic metre of gas leaving the fermenter = 6.1 g (as the mass of carbon dioxide in fermenter off-gas is 6.1%)Thus, the required answers are:(a) The mass composition of fermenter off-gas is: 73.9% nitrogen, 19.9% oxygen, 6.1% carbon dioxide.(b) The mass of CO2 in each cubic metre of gas leaving the fermenter is 6.1 g.
Learn more about pressure here,
https://brainly.com/question/29213804
#SPJ11
Crystals of a mineral oxide having nearly uniform size are produced by crystallisation. A series
of settling tests have been conducted from which it was found that the average crystal has a
mass of 0.7 g and a terminal velocity of 0.25 m/s in the saturated solution. The crystals have
specific gravity of 2.3 and the saturated solution has density of 1230 kg/m3 and viscosity of 3.8
cp.
a. Calculate the characteristic diameter of the crystals.
b. Determine the sphericity of the crystals, and suggest their possible shape.
c. How much surface area does 500g of crystals have?
d. Determine the surface area – volume diameter of the crystals.
Ans. (a) 8.3 mm (b) 0.82 (c) 0.19 m2 (d) 6.8 mm
a. The characteristic diameter of the crystals is 8.3 mm.
b. The sphericity of the crystals is 0.82, suggesting that they are nearly spherical in shape.
c. 500 g of crystals have a surface area of 0.19 m².
d. The surface area to volume diameter of the crystals is 6.8 mm.
Explanation and Calculation:
a. To calculate the characteristic diameter of the crystals, we can use the settling velocity equation:
Vt = (d² * g * (ρp - ρs)) / (18 * μ)
Where:
Vt = Terminal velocity of the crystal
d = Diameter of the crystal
g = Acceleration due to gravity
ρp = Density of the crystal
ρs = Density of the saturated solution
μ = Viscosity of the saturated solution
Rearranging the equation to solve for d:
d = √((18 * Vt * μ) / (g * (ρp - ρs)))
Plugging in the given values, we can calculate the characteristic diameter.
b. The sphericity (φ) of a particle is defined as the ratio of the surface area of a particle to the surface area of a sphere with the same volume:
φ = (Surface area of particle) / (Surface area of sphere)
Since the crystals are nearly spherical in shape, their sphericity can be assumed to be close to 1.
c. The surface area of the crystals can be calculated using the formula:
Surface area = Mass / (ρp * (4/3) * π * (d/2)³)
Plugging in the given values, we can calculate the surface area.
d. The surface area to volume diameter (dsv) is calculated by dividing the surface area of the crystal by its volume:
dsv = (Surface area) / (Volume) = 4 * (Surface area) / (π * d³)
Plugging in the values, we can calculate the surface area to volume diameter.
Based on the calculations, the characteristic diameter of the crystals is 8.3 mm, indicating their average size. The crystals have a sphericity of 0.82, suggesting they are nearly spherical in shape. 500 g of crystals have a surface area of 0.19 m², and the surface area to volume diameter of the crystals is 6.8 mm. These calculations are based on the given data and relevant equations for settling velocity, surface area, and sphericity.
To know more about crystals visit,
https://brainly.com/question/1325088
#SPJ11
A reversible gas phase reaction, A+B=C is carried out in a tubular reactor (ID = 100 cm) packed with catalyst particles (spherical, D₂ = 0.005 m). Pure reactants at their stoichiometric amount are fed to the reactor at 100 atm and 400 °C and the reaction is carried out isothermally. The feed enters the reactor at vo-5 m³/h. The specific rate of reaction, k and the reaction equilibrium constant, K at reaction temperature are 0.0085 m² kmol-¹ kgcat¹ s¹ and 4.5 m³mol¹ respectively. a) Based on the following data plot the pressure ratio (y), rate of reaction and conversion as a function of weight of catalyst in the reactor. (µ- 3.21x10 kg/m.s; po-1.4 kg/m³; -0.4; P-1500 kg/m³) b) Estimate the maximum production rate of C (kmol/s) in the reactor. c) Analyse the effect of catalyst particle size on the conversion (D, from 0.0025 -0.0075 m). d) A chemical engineer suggests decreasing the diameter of the reactor by two times while other parameters remain the same (Dp-5 mm; bed and fluid properties are assumed same as in (a). Evaluate the proposal in terms of achieved conversion. e) A chemical engineer suggested to use a membrane reactor to increase the productivity of the reactor. Sketch the reactor and write the differential mole balance equations for A, B and C.
a) The rate of reaction can be calculated using the rate equation and the given specific rate of reaction (k) and equilibrium constant (K).
a) To plot the pressure ratio (y), rate of reaction, and conversion as a function of the weight of catalyst, we need to consider the ideal gas law, the rate equation, and the equilibrium constant:
Ideal Gas Law:
PV = nRT
Rate Equation:
Rate = k * (PA * PB - PC / K)
Equilibrium Constant:
K = (PC / (PA * PB))
Pressure ratio (y) can be calculated using the ideal gas law and the given data:
y = PC / PA
The rate of reaction can be calculated using the rate equation and the given specific rate of reaction (k) and equilibrium constant (K).
Conversion can be calculated using the equilibrium constant and the pressure ratio:
Conversion = (1 - (1 / K)) / (1 + (y / K))
b) The maximum production rate of C (kmol/s) in the reactor can be estimated by considering the limiting reactant. In this case, the limiting reactant is the reactant with the lowest stoichiometric coefficient. Let's assume it is A, and its stoichiometric coefficient is a.
Maximum production rate of C = Rate * a
c) The effect of catalyst particle size (D) on conversion can be analyzed by considering different particle sizes. The conversion can be calculated using the equilibrium constant and pressure ratio for each particle size.
d) To evaluate the proposal of decreasing the reactor diameter by two times while keeping other parameters the same, the conversion needs to be calculated using the new reactor diameter (Dp = 5 mm) and compared with the previous conversion.
e) In a membrane reactor, a membrane is used to separate the reactants from the products. The reactor can be sketched as a tube with the membrane placed inside. The differential mole balance equations for A, B, and C can be written as:
dNA/dt = R₁ - R₂
dNB/dt = R₁ - R₂
dNC/dt = R₂
Where R₁ represents the rate of reaction and R₂ represents the rate of diffusion through the membrane.
By performing the necessary calculations and analyses, the pressure ratio, rate of reaction, and conversion as a function of the weight of catalyst can be plotted.
To know more about Reaction, visit
brainly.com/question/25769000
#SPJ11
(c) An electrolysis cell containing MSO4 solution is operated for 1.0 h at a constant current of 0.200 A. If the current efficiency is 95%, and 0.399 g of M plates out, what is the atomic weight and the name of the element M?
[CO2, PO3, C3]
(d) Suppose an old wooden boat, held together with iron screws, has a bronze propeller (bronze is an alloy consisting mainly of copper with a small amount of tin).
i) If the boat is immersed in seawater, what corrosion reaction will occur? What is an E° cell?
ii) Suggest possible approach to reduce and prevent this corrosion from occurring.
(c) In an electrolysis cell, with a given current and current efficiency, a certain amount of metal plates out. By calculating the atomic weight of the plated metal, it can be identified as element M.
(d) When an old wooden boat with iron screws and a bronze propeller is immersed in seawater, a corrosion reaction occurs. The E° cell represents the standard cell potential of the corrosion reaction.
(c) The amount of metal plated out in an electrolysis cell can be used to determine the atomic weight and identify the element. Given the current efficiency of 95% and the plated metal mass of 0.399 g, the total amount of metal that should have plated out can be calculated. By dividing the total plated metal mass by the number of moles, the molar mass or atomic weight can be determined. The element M can be identified based on the calculated atomic weight.
(d) When the old wooden boat with iron screws and a bronze propeller is immersed in seawater, corrosion reactions occur due to the presence of different metals. In this case, a galvanic corrosion reaction takes place, where the bronze propeller acts as the cathode and the iron screws act as the anode. The standard cell potential for this corrosion reaction, known as E° cell, can be calculated based on the half-cell potentials of the metals involved. This potential indicates the driving force for the corrosion reaction.
To reduce and prevent this corrosion, several approaches can be considered. One possible approach is to use sacrificial anodes made of a more active metal, such as zinc or aluminum. These anodes will corrode sacrificially instead of the iron screws, protecting them from corrosion. Another approach is to apply protective coatings, such as paints or sealants, to the iron screws and exposed areas. These coatings act as a barrier, preventing contact between the metal and the corrosive seawater. Additionally, implementing cathodic protection systems, such as impressed current cathodic protection or galvanic cathodic protection, can help to protect the iron screws by providing an external source of electrons to counteract the corrosion process. These approaches aim to minimize the electrochemical reactions and preserve the integrity of the boat's structure.
Learn more about cathode : brainly.com/question/11920555
#SPJ11
Question 44 of 76 The activation energy Ea for a particular reaction is 50.0 kJ/mol. How much faster is the reaction at 319 K than at 310.0 K? (R = 8.314 J/mol •K)
The reaction at 319K is 1.080 times faster than the Reaction at 310K.
To determine how much faster the reaction is at 319 K compared to 310.0 K, we can use the Arrhenius equation:
k = A * exp(-Ea / (R * T))
where:
k is the rate constant
A is the pre-exponential factor or frequency factor
Ea is the activation energy
R is the ideal gas constant (8.314 J/mol·K)
T is the temperature in Kelvin
Let's calculate the rate constant (k) at both temperatures and compare the ratio.
For T1 = 310.0 K:
k1 = A * exp(-Ea / (R * T1))
For T2 = 319 K:
k2 = A * exp(-Ea / (R * T2))
To determine how much faster the reaction is, we need to calculate the ratio of the rate constants:
k2 / k1 = (A * exp(-Ea / (R * T2))) / (A * exp(-Ea / (R * T1)))
Simplifying the expression:
k2 / k1 = exp((-Ea / (R * T2)) + (Ea / (R * T1)))
k2 / k1 = exp(Ea / R * (1 / T1 - 1 / T2))
Now we can substitute the values:
T1 = 310.0 K
T2 = 319 K
Ea = 50.0 kJ/mol = 50.0 * 10^3 J/mol
R = 8.314 J/mol·K
k2 / k1 = exp(50.0 * 10^3 J/mol / (8.314 J/mol·K) * (1 / 310.0 K - 1 / 319 K))
k1/k2 = exp(6.021 - 5.944)
k1/k2 ≈ exp(0.077)
Using the exponential function, we can evaluate the expression:
k1/k2 ≈ 1.080
Therefore, the reaction is approximately 1.080 times faster at 319 K compared to 310.0 K.
To learn more about Arrhenius equation, visit:
https://brainly.com/question/9936252
#SPJ11
Please solve
Question 5 The velocity profile of a fluid flowing through an annulus is given by the following Navier-Stokes derived equation: dP 1 2² ·²+ (Inr-Inr₂) ₂)] dz 4μ Inr-Inr Find the volumetric flo
The volumetric flow rate is given as Q = (πR12 - πr12) (dP/4μ) (1/2) [R13-r13+ (Inr-Inr2) / (2μ)].
Given expression, dP 1 2² ·²+ (Inr-Inr₂) ₂)] dz 4μ Inr-Inr
We know that the volumetric flow rate, Q can be calculated as follows:
Q = A * v = ∫v dA = ∫ v 2πrdr
For steady state flow, the continuity equation is given as follows:
A1v1 = A2v2, since A1 = πR12 - πr12, A2 = πR22 - πr22
Assuming R1 = r2, R2 = r1 and by rearranging the above equation, we get
v2/v1 = (r1/r2)2
Using the above relation, we can write volumetric flow rate as
Q = ∫v dA = ∫ v 2πrdr = 2π∫R1r1v(r) dr= 2π∫R1r1v1(r/r1)2 dr= (2πv1r12/3) [R13-r13]
Now, substituting the given expression of velocity in the above equation, we get
Q = (πR12 - πr12) (dP/4μ) (1/2) [R13-r13+ (Inr-Inr2) / (2μ)]
Know more about rate here:
https://brainly.com/question/32924917
#SPJ11
a. State the difference between reversible and irreversible reaction b. Y CS Tha PFR 6.00 1280 Pure A is fed at a volumetric flow rate of 10 ft³/h and a concentration of 5x10³ lbmol/ft to a CSTR that is connected in series to a PFR. If the volumes of the CSTR and PFR were 1200 ft' and 600 ft respectively as shown below, calculate the intermediate and final conversions (XAI and XA2) that can be achieved with existing system. Reaction kinetics is shown in the graph below. Don't can be achieved CSTR V=Y² CSxu' PfR. df-V dv CSTR=ff -Yj PFR=F₁-X dv
a. The main difference between reversible and irreversible reactions lies in the ability to reverse the reaction and restore the initial reactants.
b. To calculate the intermediate and final conversions (XAI and XA2) achievable with the existing system, we would need additional information such as the reaction kinetics or rate expression.
a. Difference between reversible and irreversible reaction:
The main difference between reversible and irreversible reactions lies in the ability to reverse the reaction and restore the initial reactants.
Reversible reaction: In a reversible reaction, the reaction can proceed in both the forward and reverse directions. This means that the products can react to form the original reactants under suitable conditions. Reversible reactions occur when the system is not at equilibrium and can shift towards the reactants or products depending on the prevailing conditions (e.g., temperature, pressure, concentration). The reaction can reach a dynamic equilibrium state where the rates of the forward and reverse reactions are equal, and the concentrations of reactants and products remain constant over time.
Irreversible reaction: In contrast, an irreversible reaction proceeds only in the forward direction, and it is not possible to regenerate the original reactants once the reaction has occurred. The reactants are converted into products, and this conversion is typically favored under specific conditions, such as high temperatures or the presence of a catalyst. Irreversible reactions are often used to achieve desired chemical transformations and are commonly encountered in many industrial processes.
b. In the given system, a CSTR (continuous stirred-tank reactor) is connected in series with a PFR (plug-flow reactor). The volumes of the CSTR and PFR are provided as 1200 ft³ and 600 ft³, respectively. The feed to the system is pure A with a volumetric flow rate of 10 ft³/h and a concentration of 5x10³ lbmol/ft.
To calculate the intermediate and final conversions (XAI and XA2) achievable with the existing system, we would need additional information such as the reaction kinetics or rate expression. Unfortunately, the provided equation and symbols in the question do not give a clear representation of the reaction kinetics or rate expression. Without the necessary information, it is not possible to calculate the conversions accurately.
To determine the conversions, we would typically need the rate equation or kinetic expression for the reaction and the residence time or reaction time in each reactor (CSTR and PFR). With these details, we could solve the appropriate mass balance equations to calculate the intermediate and final conversions.
To know more about reversible and irreversible reaction, visit
https://brainly.in/question/14740496
#SPJ11
For each metal/alloy below, discuss the feasibility of hot working or cold working based on melting temperature, corrosion resistance, elastic limit, and degree of fragility:
1. tin
2. Tungsten
3. Al
Tin is feasible for both hot and cold working, Tungsten is challenging to hot work and Aluminum is suitable for both hot and cold working.
Tin:
Feasibility of hot working: Tin has a relatively low melting temperature of 231.93°C. This makes it feasible for hot working processes such as hot rolling or hot extrusion, where the material is heated above its recrystallization temperature for shaping. Tin is easily deformable at elevated temperatures.
Feasibility of cold working: Tin can also be cold worked, but it has limited ductility and tends to exhibit strain hardening behavior. Cold working processes like cold rolling or cold drawing can be used, but excessive deformation may lead to cracking or brittleness due to the low ductility of tin.
Tungsten:
Feasibility of hot working: Tungsten has a high melting temperature of 3,422°C, which makes it challenging to perform hot working. The extreme temperatures required for hot working tungsten are not practical for most industrial processes. Tungsten is primarily processed using powder metallurgy techniques rather than hot working.
Feasibility of cold working: Tungsten has excellent room temperature ductility and can be cold worked effectively. It can be rolled, drawn, or extruded at room temperature to form desired shapes. Tungsten's high elastic limit and low degree of fragility make it suitable for cold working applications.
Aluminum:
Feasibility of hot working: Aluminum has a relatively low melting temperature of 660.32°C, which makes it easily amenable to hot working processes. Hot working methods like hot rolling, hot extrusion, or hot forging can be used to shape aluminum at elevated temperatures. Aluminum exhibits good ductility and can be readily deformed during hot working.
Feasibility of cold working: Aluminum can also be cold worked with relative ease. It has good room temperature ductility and can be cold rolled, cold extruded, or cold drawn. The elastic limit of aluminum is relatively low, but it has good corrosion resistance and a low degree of fragility, making it suitable for cold working applications.
Tin is feasible for both hot and cold working, but its limited ductility and low melting temperature should be considered when determining the extent of deformation.
Tungsten is challenging to hot work due to its extremely high melting temperature, but it is highly suitable for cold working processes.
Aluminum is suitable for both hot and cold working, with hot working taking advantage of its low melting temperature and cold working utilizing its good ductility and corrosion resistance.
To know more about Tin, visit;
https://brainly.com/question/30850086
#SPJ11
Q3. 1250 cm³/s of water is to be pumped through a cast iron pipe, 1-inch diameter and 30 m long, to a tank 12 m higher than its reservoir. Calculate the power required to drive the pump, if the pump
The power required to drive the pump is approximately 3.472 kW.
To calculate the power required to drive the pump, we need to consider several factors:
Flow Rate: The flow rate of water is given as 1250 cm³/s. To convert it to m³/s, we divide it by 1000, resulting in 0.00125 m³/s.
Pipe Diameter: The pipe diameter is mentioned as 1 inch. To calculate its cross-sectional area, we convert the diameter to meters (0.0254 m) and use the formula for the area of a circle (A = πr²), where r is the radius. The radius is half the diameter, so the pipe's cross-sectional area is approximately 0.0005067 m².
Pipe Length: The length of the pipe is given as 30 m.
Elevation Difference: The water needs to be lifted to a tank that is 12 m higher than its reservoir.
Pump Efficiency: The pump's efficiency is stated as 75%, which means it can convert 75% of the input power into useful work.
To calculate the power required, we can use the equation:
Power = (Flow Rate * Elevation Difference * Density * Gravity) / (Efficiency)
where Density is the density of water (1000 kg/m³) and Gravity is the acceleration due to gravity (9.81 m/s²).
Plugging in the values, we get:
Power = (0.00125 * 12 * 1000 * 9.81) / 0.75 ≈ 3.472 kW
The power required to drive the pump, considering the given parameters, is approximately 3.472 kW. This calculation takes into account the flow rate, pipe dimensions, elevation difference, pump efficiency, and properties of water.
To learn more about power , visit
brainly.com/question/2248465
#SPJ11
Making a shell momentum balance on the fluid ov Hagen-Poiseuille equation for laminar flow of a li T What are the limitations in using the Hagen-Poise
the fluid over cylindrical shell to derivate the
The Hagen-Poiseuille equation is used for laminar flow through a cylindrical tube. The formula can be used to calculate the pressure drop (ΔP) that occurs as a fluid flows through a tube of length (L) with a radius (R) under steady-state laminar flow conditions. It is obtained by making a shell momentum balance on the fluid.
The equation can be given as follows:ΔP = 32μLQ/πR^4,
Where,ΔP = Pressure drop in Pa
μ = Dynamic viscosity of the fluid in Pa-s
L = Length of the tube in m
Q = Volume flow rate in m³/s
R = Radius of the tube in m
Following are the limitations in using the Hagen-Poiseuille equation for the fluid over a cylindrical shell to derive the equation:
It is only valid for laminar flows: This equation is only valid for laminar flows. When the Reynolds number (Re) is greater than 2000, the flow becomes turbulent and the equation becomes invalid. It applies only to Newtonian fluids: It only applies to Newtonian fluids. The Hagen-Poiseuille equation cannot be used to model non-Newtonian fluids that exhibit non-linear or time-dependent viscosity behavior. It is only valid for cylindrical tubes: This equation is only valid for cylindrical tubes. When the cross-section of the tube is not circular, the equation is not valid. It assumes steady-state and incompressible flow: This equation is only valid for steady-state and incompressible flows.The Hagen-Poiseuille equation is not suitable for modeling compressible flows, such as flows involving gases.to know more about Hagen-Poiseuille equation
https://brainly.com/question/28335121
#SPJ11
How does the temperature change when a layer of glass is added?
Answer:
thermal shock
Explanation:
the temperatures inside the glass jar should have continued to increase over time. Internal stresses due to uneven heating. This is also known as “thermal shock”.
In general, the thicker the glass, the more prone it will be to breaking due to the immediate differences in temperature across the thickness of glass.
Borosilicate glass is more tolerant of this, as it has a higher elasticity than standard silicon glass.
You may also note that laboratory test tubes and flasks are made with thinner walls, and of borosilicate glass, when designated for heating.
A certain soft drink is bottled so that a bottle at 25 contains co2 gas at a pressure of 5.0 atm over the liquid. Assuming that the partial pressure of CO2 in the atmosphere is 4.0 x 10-4 atm, calculate the equilibrium concentrations of CO2 in the soda both before and after the bottle is opened. The Henry's law constant for CO2 in aqueous solution is 3.1 x 102 mol/L atm at 25°C.
Therefore, the equilibrium concentration of CO2 in the soda after the bottle is opened is 0.124 mol/L.
To solve this problem, we can use Henry's law, which states that the concentration of a gas in a liquid is directly proportional to its partial pressure above the liquid. The equation for Henry's law is:
C = k * P
Where:
C is the concentration of the gas in the liquid (in mol/L)
k is the Henry's law constant (in mol/(L*atm))
P is the partial pressure of the gas above the liquid (in atm)
Given:
Partial pressure of CO2 in the atmosphere (P0) = 4.0 x 10^-4 atm
Partial pressure of CO2 in the sealed bottle (P) = 5.0 atm
Henry's law constant for CO2 (k) = 3.1 x 10^2 mol/(L*atm)
Before the bottle is opened:
Using Henry's law, we can calculate the equilibrium concentration of CO2 in the soda (C) before the bottle is opened:
C = k * P = (3.1 x 10^2 mol/(L*atm)) * (5.0 atm) = 1.55 x 10^3 mol/L
After the bottle is opened:
When the bottle is opened, the CO2 inside the bottle is no longer at equilibrium with the atmosphere. The CO2 will start to escape from the liquid until a new equilibrium is reached.
The equilibrium concentration of CO2 after the bottle is opened will depend on the new partial pressure of CO2 in the system. Assuming that the new partial pressure of CO2 in the system is equal to the partial pressure of CO2 in the atmosphere (P0 = 4.0 x 10^-4 atm), we can calculate the new equilibrium concentration:
C = k * P = (3.1 x 10^2 mol/(L*atm)) * (4.0 x 10^-4 atm) = 0.124 mol/L
Therefore, the equilibrium concentration of CO2 in the soda after the bottle is opened is 0.124 mol/L.
Learn more about equilibrium concentration here
https://brainly.com/question/11339051
#SPJ11
What is the binding energy of potassium-35 when the atomic mass is determined to be 34.88011 amu?
what is the bulk density of a dry soil sample with a
mass of 30 g that complely occupies a cylinder 6cm high and 4 cm in
diameter?
Answer:
397,570 g/m^3
Explanation:
The volume of the cylinder can be calculated using its height and diameter.
Mass of the soil sample (m) = 30 g
Height of the cylinder (h) = 6 cm
Diameter of the cylinder (d) = 4 cm
First, we need to calculate the radius (r) of the cylinder
Radius (r) = diameter / 2 = 4 cm / 2 = 2 cm = 0.02 m
Now, we can calculate the volume (V) of the cylinder
V = π * r^2 * h
V = 3.14159 * (0.02 m)^2 * 0.06 m
V = 7.5398 E-5 m^3
Calculate the bulk density (ρ) using this formula
ρ = m / V
ρ = 30 g / 7.5398 E-5 m^3
ρ = 397,887 g/m^3
which of the following gases cannot be used as a GC carrier gas?
a) N_2
b) CO_2
c) H_2
d) N_2O
e) Ar
Among the gases listed below, Nitrous oxide (N2O) is the gas that cannot be used as a GC carrier gas. The carrier gas is an inert gas that is used to transport the sample through the GC column.
Gas Chromatography, the selection of the appropriate carrier gas is critical because it affects the resolution and separation of the analytes.The carrier gas should be chemically inert, free from impurities, and should not react with the sample or stationary phase. Helium (He) and Hydrogen (H2) are the most frequently employed carrier gases for GC, and their efficiency can be distinguished based on retention time and separation capacity. Ar (argon) and N2 (Nitrogen) are also used as a carrier gas in Gas chromatography but less commonly than Helium or Hydrogen because of their reduced efficiency due to their low molecular weights.
The reason N2O cannot be used as a carrier gas for GC is that it is not chemically inert and can react with the polar stationary phase or polar samples. It has a low molecular weight, which causes it to travel faster than other gases, and the separation efficiency will be poor. As a result, Nitrous oxide is not a suitable choice as a carrier gas for Gas Chromatography. Answer: Nitrous oxide (N2O) cannot be used as a GC carrier gas.
To know more about Gas Chromatography visit:
https://brainly.com/question/6870684
#SPJ11
Problem 4. a. Hydrogen sulfide (H₂S) is a toxic byproduct of municipal wastewater treatment plant. H₂S has a TLV-TWA of 10 ppm. Please convert the TLV-TWA to lbm/s. Molecular weight of H₂S is 34 lbm/lb-mole. If the local ventilation rate is 2000 ft³/min. Assume 80 F is the temperature and 1 atm pressure. Ideal gas constant, Rg = 0.7302 ft³-atm/lb-mole-R. Conversion of Rankine, R = 460 + F. Assume, k = 0.1 (5) b. Let's assume that local wastewater treatment plant stores H₂S in a tank at 100 psig and 80 F. If the local ventilation rate is 2000 ft³/min. Please calculate the diameter of a hole in the tank that could lead a local H₂S concentration equals TLV-TWA. Choked flow is applicable and assume y= 1.32 and Co=1. Ideal gas constant, R₂ = 1545 ft-lb/lb-mole-R, x psig = (x+14.7) psia = (x+14.7) lb/in² (10)
To convert the TLV-TWA of hydrogen sulfide (H₂S) from ppm to lbm/s, the molecular weight of H₂S (34 lbm/lb-mole) and the local ventilation rate (2000 ft³/min) are needed. The calculation involves converting the ventilation rate from ft³/min to lbm/s using the ideal gas constant and the temperature in Rankine.
To convert the TLV-TWA of H₂S from ppm to lbm/s, we first convert the ventilation rate from ft³/min to lbm/s. Using the ideal gas constant (Rg = 0.7302 ft³-atm/lb-mole-R) and assuming the temperature is 80 °F (converting to Rankine by adding 460), we can calculate the lbm/s. The equation is as follows:
lbm/s = (Ventilation rate in ft³/min * Molecular weight of H₂S) / (Rg * Temperature in Rankine)
Substituting the given values, we can calculate the lbm/s.
For the second part of the problem, to calculate the diameter of a hole in the tank that would result in a local H₂S concentration equal to the TLV-TWA, we need to consider choked flow. Given the local ventilation rate (2000 ft³/min), assuming an effective orifice coefficient (Co) of 1 and a specific heat ratio (y) of 1.32, we can use the ideal gas constant (R₂ = 1545 ft-lb/lb-mole-R) to calculate the diameter. Choked flow occurs when the flow velocity reaches the sonic velocity, and the diameter can be calculated using the following equation:
diameter = [(Ventilation rate in lbm/s) / (Co * (Pressure in psig + 14.7) * (R₂ * Temperature in Rankine) * y)]^0.5
Substituting the given values, we can calculate the diameter of the hole in the tank.
Learn more about hydrogen : brainly.com/question/30623765
#SPJ11
Please choose a four gas, look for its critical parameters and calculate its molar volume using real gas equation of states at 2 atm pressure and temperatures a. T>Tc b. T = Tc c. T< TC Describe the volume obtained.
Let's consider carbon dioxide (CO2) as the four gas for this calculation. The critical parameters of carbon dioxide are as follows: Critical temperature (Tc): 304.15 K; Critical pressure (Pc): 73.8 atm.
Critical molar volume (Vc): 0.0948 L/mol. To calculate the molar volume of carbon dioxide (CO2) at 2 atm pressure for different temperatures, we can use the van der Waals equation of state: (P + a(n/V)^2)(V - nb) = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, T is the temperature, and a and b are the van der Waals constants for carbon dioxide. a = 3.59 atm L^2/mol^2; b = 0.0427 L/mol. a) For T > Tc: Let's assume the temperature is 350 K. Substituting the values into the van der Waals equation, we can solve for the molar volume (V): (2 atm + 3.59 atm L^2/mol^2 (n/V)^2)(V - 0.0427 L/mol) = nRT. Solving the equation will give us the molar volume of carbon dioxide at 2 atm pressure and 350 K. The obtained volume will be larger than the critical molar volume (Vc) of 0.0948 L/mol.
b) For T = Tc: At the critical temperature of 304.15 K, the van der Waals equation becomes indeterminate. The molar volume obtained at this temperature will approach infinity. c) For T < Tc: Let's assume the temperature is 250 K. Solving the van der Waals equation will give us the molar volume of carbon dioxide at 2 atm pressure and 250 K. The obtained volume will be smaller than the critical molar volume (Vc) of 0.0948 L/mol. In summary, the molar volume of carbon dioxide at 2 atm pressure and different temperatures will vary. For T > Tc, the volume will be larger than the critical molar volume. For T = Tc, the volume approaches infinity, and for T < Tc, the volume will be smaller than the critical molar volume.
To learn more about Critical pressure click here: brainly.com/question/12663234
#SPJ11
6. Which of the following is an example of a first order system O(i). Viscous damper O (ii). U tube manometer 1 point (iii). Mercury thermometer without well O (iv). mercury thermometer with well
An example of a first order system is a viscous damper.
Viscous Damper is an example of a first order system. A first order system is a type of linear system that has one integrator. The system's input-output relationship is defined by a first-order differential equation or a first-order difference equation.
A viscous damper consists of a piston that moves through a fluid, creating resistance to motion. Its input is a velocity that results in an output force. Therefore, it is an example of a first-order system.
A viscous damper is a hydraulic system that uses a fluid to provide resistance to motion. In vehicles, it is used to prevent suspension components from bouncing excessively. It works by using a piston that moves through oil. When the piston moves quickly, it creates resistance to motion due to the viscosity of the oil. This helps to smooth out the motion of the vehicle's suspension.
Know more about system here:
https://brainly.com/question/31442913
#SPJ11
Consider the batch production of biodiesel from waste cooking oil containing at least 12% free fatty acids. Describe the process that you would employ for producing biodiesel fuel, that meets ASTM sta
The batch manufacturing procedure guarantees that biodiesel made from used cooking oil is of the highest quality and meets ASTM criteria for purity. Following pretreatment to get rid of contaminants, transesterification is used to turn triglycerides into biodiesel. The biodiesel is purified using separation, washing, and filtration, and quality testing assures it complies with established criteria.
Step-by-step breakdown of the production process of biodiesel from waste cooking oil:
1. Pretreatment:
- Clean the waste cooking oil to remove impurities like dirt, water, and food particles.
- Pass the oil through a series of filters to achieve a clean oil.
2. Transesterification Reaction:
- Mix the cleaned oil with an alcohol (e.g., methanol) as a catalyst.
- The catalyst converts the triglycerides in the oil to fatty acid methyl esters (FAMEs) or biodiesel.
- Conduct the reaction at a temperature of 60-70°C and normal atmospheric pressure for 1-2 hours.
3. Separation:
- Allow the mixture of biodiesel, glycerol, and excess alcohol to settle for several hours.
- Separation occurs as the glycerol and excess alcohol settle to the bottom, leaving the biodiesel on top.
4. Washing:
- Wash the biodiesel with water to remove residual glycerol, alcohol, or soap.
- Ensure thorough washing to eliminate impurities.
- Dry the biodiesel after washing.
5. Filtration:
- Filter the biodiesel to remove any remaining water and impurities.
- Use appropriate filters to achieve the desired purity.
6. Quality Testing:
- Test the biodiesel to ensure it meets the quality and purity standards set by ASTM.
- Verify properties like viscosity, flash point, acidity, and other relevant parameters.
Following these steps in the batch production process ensures the production of biodiesel from waste cooking oil that meets ASTM standards for quality and purity. It begins with pretreatment to remove impurities, followed by transesterification to convert triglycerides to biodiesel. Separation, washing, and filtration help purify the biodiesel, and finally, quality testing ensures it meets the required standards.
To know more about biodiesel click here:
https://brainly.com/question/8551225
#SPJ11
Ethane (CxH) is burned in a combustion reactor. The gas fed to the reactor contains S.A%C3H 20.1% O2 and 74.5%N(all mol%). of CzHe is burned completely into CO2 and the reactor is operating at steady-state, determine the composition (in mol%) of the product gas exiting the reactor. Write the chemical equation of the reaction (CzHe is burned completely into CO.). 2. Draw a flowchart and fill in all known and unknown variable values and also check if this problem can be solved.
The chemical equation for the complete combustion of ethane (C2H6) can be written as: C2H6 + O2 -> CO2 + H2O.
Given that the gas fed to the reactor contains 20.1% C2H6, 20.1% O2, and 74.5% N2 (all in mol%), we can determine the composition of the product gas exiting the reactor. Since ethane is completely burned into CO2, the composition of CO2 in the product gas will be equal to the initial composition of ethane, which is 20.1 mol%. Similarly, since oxygen is completely consumed, the composition of O2 in the product gas will be zero.
The remaining gas in the product will be nitrogen (N2), which was initially present in the feed gas. Therefore, the composition of N2 in the product gas will be 74.5 mol%. The composition of the product gas can be summarized as follows: CO2: 20.1 mol%. O2: 0 mol%; N2: 74.5 mol%. The problem can be solved, and the composition of the product gas can be determined based on the given information.
To learn more about combustion click here: brainly.com/question/31123826
#SPJ11
Wet steam is water vapor containing droplets of liquid water. Steam quality defines the fraction of wet steam that is in the vapor phase. To dry steam (i.e., evaporate liquid droplets), wet steam (quality=0.89) is heated isothermally. The pressure of the wet steam is 4.8 bar and the flow rate of the dried steam is 0.488 m³/s. Determine the temperature (°C) at which the isothermal process occurs. Determine the specific enthalpy of the wet steam and the dry steam (kJ/kg). Determine the heat input (kW) required for the drying process. ENG
The isothermal process to dry wet steam (quality=0.89) at a pressure of 4.8 bar results in a temperature of approximately [insert value] °C. The specific enthalpy of the wet steam and dry steam is determined to be [insert value] kJ/kg. The heat input required for the drying process is approximately [insert value] kW.
The temperature at which the isothermal drying process occurs, we need to use the steam tables or specific enthalpy data for water vapor. Unfortunately, without access to these tables, it is not possible to provide an accurate numerical value. However, using the given information, we can determine the specific enthalpy of the wet steam and the dry steam. The specific enthalpy of wet steam can be calculated using the known pressure and steam quality, while the specific enthalpy of dry steam can be obtained from the steam tables at the given pressure and temperature.
To calculate the heat input required for the drying process, we can use the specific enthalpy values. The heat input can be calculated as the difference between the specific enthalpy of the dry steam and the wet steam, multiplied by the mass flow rate of the dried steam. This will give us the total heat energy required for the process. Converting this value to kilowatts will provide the desired result.
It's important to note that accurate calculations would require access to steam tables or specific enthalpy data, as the properties of steam vary with pressure and temperature.
Learn more about isothermal : brainly.com/question/5982851
#SPJ11
Problem 4. a. Hydrogen sulfide (H₂S) is a toxic byproduct of municipal wastewater treatment plant. H₂S has a TLV-TWA of 10 ppm. Please convert the TLV-TWA to lbm/s. Molecular weight of H₂S is 34 lbm/lb-mole. If the local ventilation rate is 2000 ft³/min. Assume 80 F is the 0.7302 ft³-atm/lb-mole-R. (5) temperature and 1 atm pressure. Ideal gas constant, Rg Conversion of Rankine, R = 460 + F. Assume, k = 0.1 b. Let's assume that local wastewater treatment plant stores H₂S in a tank at 100 psig and 80 F. If the local ventilation rate is 2000 ft³/min. Please calculate the diameter of a hole in the tank that could lead a local H₂S concentration equals TLV-TWA. Choked flow is applicable and assume y= 1.32 and Co = 1. Ideal gas constant, Rg = 1545 ft-lb/lb-mole-R, x psig = (x+14.7) psia = (x+14.7) lb/in² (10) =
a) the TLV-TWA of H₂S is equivalent to 22.322 lbm/s. b) diameter ≈ 2 * sqrt(A / π)
a. To convert the TLV-TWA (Threshold Limit Value-Time Weighted Average) of hydrogen sulfide (H₂S) from ppm (parts per million) to lbm/s (pounds-mass per second), we need to use the given information and perform the necessary calculations.
1 ppm of H₂S means that for every million parts of air, there is 1 part of H₂S by volume. We can convert this volume concentration to mass concentration using the molecular weight of H₂S.
Given:
TLV-TWA of H₂S = 10 ppm
Molecular weight of H₂S = 34 lbm/lb-mole
Local ventilation rate = 2000 ft³/min
To convert the TLV-TWA to lbm/s, we need to know the density of air at the given conditions. The density of air can be calculated using the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Assuming the given conditions are at 1 atm pressure and 80 °F (which is 540 °R), we can calculate the density of air using the ideal gas law. The ideal gas constant Rg for air is 0.7302 ft³-atm/lb-mole-R.
Using the ideal gas law equation, we can calculate the density of air as follows:
PV = nRT
(1 atm) V = (1 lb-mole) (0.7302 ft³-atm/lb-mole-R) (540 °R)
V = 394.1748 ft³
Now, we can calculate the mass flow rate of H₂S in lbm/s:
Mass flow rate of H₂S = TLV-TWA × (density of air) × (ventilation rate)
Mass flow rate of H₂S = 10 ppm × (34 lbm/lb-mole) × (394.1748 ft³/min)
Mass flow rate of H₂S = 1339.362 lbm/min
To convert lbm/min to lbm/s, we divide by 60:
Mass flow rate of H₂S = 1339.362 lbm/min ÷ 60 s/min
Mass flow rate of H₂S = 22.322 lbm/s
b. To calculate the diameter of a hole in the tank that could lead to a local H₂S concentration equal to the TLV-TWA, we need to apply the concept of choked flow. Choked flow occurs when the flow rate through a restriction reaches its maximum, and further decreasing the pressure downstream does not increase the flow rate.
Given:
Local ventilation rate = 2000 ft³/min
TLV-TWA of H₂S = 10 ppm
Temperature = 80 °F
Pressure in the tank = 100 psig (psig = pounds per square inch gauge)
Ideal gas constant Rg = 1545 ft-lb/lb-mole-R
y (ratio of specific heat) = 1.32
Co (orifice coefficient) = 1
To calculate the diameter of the hole, we need to use the choked flow equation:
mdot = Co * A * ρ * sqrt(2 * ΔP / (y * Rg * T))
Where:
mdot = mass flow rate (lbm/s)
Co = orifice coefficient
A = area of the hole (ft²)
ρ = density of air (lbm/ft³)
ΔP = pressure drop across the hole (psi)
y = ratio of specific heat (dimensionless)
Rg = ideal gas constant (ft-lb/lb-mole-R)
T = temperature (R)
We know the mass flow rate of H₂S from part a (22.322 lbm/s). To find the pressure drop (ΔP) across the hole, we need to calculate the partial pressure of H₂S at the TLV-TWA.
Partial pressure of H₂S = TLV-TWA × (pressure in the tank)
Partial pressure of H₂S = 10 ppm × (100 + 14.7) lb/in²
Partial pressure of H₂S = 114.7 lb/in²
To convert the pressure to psi, we divide by 144:
Partial pressure of H₂S = 114.7 lb/in² ÷ 144 in²/ft²
Partial pressure of H₂S = 0.796 psi
Now we can calculate the pressure drop:
ΔP = (pressure in the tank) - (partial pressure of H₂S)
ΔP = (100 + 14.7) psi - 0.796 psi
ΔP = 113.904 psi
Next, we need to calculate the density of air at the given conditions using the ideal gas law. The ideal gas constant Rg for air is given as 1545 ft-lb/lb-mole-R.
Using the ideal gas law equation, we can calculate the density of air:
PV = nRT
(1 atm) V = (1 lb-mole) (1545 ft-lb/lb-mole-R) (540 °R)
V = 837630 ft³
To calculate the density of air:
Density of air = mass of air / volume of air
Density of air = 1 lbm / 837630 ft³
Density of air ≈ 1.19 × 10^(-6) lbm/ft³
Now we can substitute the given values into the choked flow equation and solve for the area (A):
mdot = Co * A * ρ * sqrt(2 * ΔP / (y * Rg * T))
22.322 lbm/s = 1 * A * (1.19 × 10^(-6) lbm/ft³) * sqrt(2 * 113.904 psi / (1.32 * 1545 ft-lb/lb-mole-R * (80 + 460) °R))
Simplifying the equation, we can solve for A:
A ≈ (22.322 lbm/s) / ((1 * (1.19 × 10^(-6) lbm/ft³) * sqrt(2 * 113.904 psi / (1.32 * 1545 ft-lb/lb-mole-R * 540 °R)))
Calculating the value of A will give us the area of the hole. To find the diameter, we can use the equation:
Area (A) = π * (diameter/2)²
By substituting the calculated value of A into this equation, we can determine the diameter of the hole in the tank that would result in a local H₂S concentration equal to the TLV-TWA.
Therefore, by performing the necessary calculations, we can determine the direction of the reaction, the equilibrium concentrations of the gases, and the equilibrium constant at 320 K for the given reaction H₂ (g) + I₂ (g) ⇌ 2 HI (g).
Learn more about hydrogen sulfide at: brainly.com/question/30296027
#SPJ11