9. There are 8 black socks, 6 blue socks, and 14 white socks in a drawer. If one sock is randomly chosen from the
drawer, then what is the probability that the sock will not be blue?

The remainder when a 90-digit number 9999 is divided by 89 is 0, as the result of applying the divisibility rule of 89, which involves reversing the digits of the number and subtracting the smaller from the larger.

To find the remainder when a 90-digit number 9999 is divided by 89, we can use the divisibility rule of 89. The rule states that for any integer n, the number obtained by reversing the digits of n and subtracting the smaller from the larger is divisible by 89.

In this case, we reverse the digits of 9999 to get 9999 again, and subtract the smaller from the larger to get 0. Since 0 is divisible by any number, including 89, the remainder when 9999 is divided by 89 is 0.

To know more about divisibility:

https://brainly.com/question/11323048

#SPJ4

The surface area of the rectangular solid with length 5 inches, width 2 inches, and height 4 inches is 76 sq inch. The answer is D.

What is surface area of rectangular solid ?

The surface area of a rectangular solid (also known as a rectangular prism) is the total area of all its faces. It can be calculated using the formula:

SA = 2lw + 2lh + 2wh

where l is the length of the rectangular solid, w is its width, and h is its height.

The rectangular solid has six faces: a top face, a bottom face, a front face, a back face, a left side face, and a right side face. The formula above accounts for the area of each of these faces.

According to the question:
The formula for the surface area of a rectangular solid is:

SA = 2lw + 2lh + 2wh

We are given that the length (l) of the solid is 5 inches, the width (w) is 2 inches, and the height (h) is 4 inches. Substituting these values into the formula, we get:

SA = 2(5)(2) + 2(5)(4) + 2(2)(4)

= 20 + 40 + 16

= 76 square inches

Therefore, the surface area of the rectangular solid with length 5 inches, width 2 inches, and height 4 inches is 76 square inches. The answer is D.

To know more about surface area of rectangular solid visit:
https://brainly.com/question/30598274
#SPJ1

The answer is the second one.

The -1 is shaded in, and the arrow is pointing to the ĺeft.

This means that the line represented by f(x-3) has been shifted down by 39 units compared to the line represented by f(x).

In mathematics, the term "Y-intercept" refers to the point at which a graph or line intersects the y-axis. It is the value of the dependent variable (usually represented by "y") when the independent variable (usually represented by "x") is equal to zero.

For example, the equation of a straight line can be written in the form y = mx + b, where m is the slope of the line and b is the y-intercept. The y-intercept is the value of y when x is equal to zero.

So, if the equation of a line is y = 2x + 5, then the y-intercept is 5, because this is the value of y when x is equal to zero.

To simplify f(x-3), we need to substitute x-3 for x in the expression for f(x):

[tex]f(x-3) = 10(x-3) - 9[/tex]

Expanding the multiplication and simplifying, we get:

[tex]f(x-3) = 10x - 30 - 9[/tex]

[tex]Therefore, f(x-3) = 10x - 39.[/tex]

To determine the slope, we can compare this expression to the standard form of a linear equation, y = mx + b, where m is the slope. We can see that the coefficient of x in the simplified expression is 10, so the slope is 10. This means that the line represented by f(x-3) is steeper than the line represented by f(x).

To determine the y-intercept, we can look at the constant term in the expression. In this case, the constant term is -39. This means that the line represented by f(x-3) has been shifted down by 39 units compared to the line represented by f(x).

To know more about y-intercept, visit

https://brainly.com/question/14180189

#SPJ1

answer: 10

step by step explanation:

this is not a textbook way but

4:5 means 4/5 and we know that the numbers will be equal to this number so we can multiply the number 4/5*2/2 so we will get 8/10

8/10=4/5

and 8*10=80

so 1st no. is 8 and 2nd is 10

10>8

Answer:

greater number is 10

Step-by-step explanation:

the ratio of the 2 numbers = 4 : 5 = 4x : 5x ( x is a multiplier )

their product is 80 , that is

4x × 5x = 80

20x² = 80 ( divide both sides by 20 )

x² = 4 ( take square root of both sides )

x = [tex]\sqrt{4}[/tex] = 2

then greater number = 5x = 5 × 2 = 10

An SAT-M score in the 98th percentile is approximately 734.55 or higher.

According to the College Board website,

The scores on the math part of the SAT (SAT-M) in a recent year had a mean of 507 and a standard deviation of 111. Assume that SAT-M scores follow a normal distribution. To gain admission to a particular engineering school, a requirement is to obtain an SAT-M score in the 98th percentile, indicating that the score is among the top 2% of scores.

For getting the actual SAT-M score, we need to find the corresponding z-score for the 98th percentile.

Using the Inverse Normal Distribution Calculator, we get a z-score of 2.05 for the 98th percentile.

So, the formula for finding an actual SAT-M score is:

x = μ + zσ

Where x is the actual SAT-M score,

μ is the mean = 507,

z is the z-score = 2.05,

σ is the standard deviation = 111

x = 507 + (2.05)(111)

x = 507 + 227.55

x = 734.55

The actual SAT-M score for the 98th percentile is approximately 734.55 (rounded to the nearest hundredth).

Therefore, an SAT-M score of 734.55 or higher is required for admission to the engineering school.

To know more about the "z-score ": https://brainly.com/question/25638875

#SPJ11

The slope-intercept form of the inequality is given as follows:

The slope-intercept representation of a linear function is given by the equation presented as follows:

y = mx + b

The coefficients of the function and their meaning are described as follows:

Hence the inequality for this problem is simplified as follows:

More can be learned about slope-intercept at https://brainly.com/question/24808124

#SPJ1

Answer:

x^2 +6x+7

Step-by-step explanation:

for roots a and b

x^2 - (a+b)x + ab = (x-a)(x-b)

The expected adult height for a toddler who is 34 inches tall at the 30-month checkup is around 5 feet 7 inches.

To determine the expected adult height, one must multiply the current height by 1.08. Since 34 inches x 1.08 is equal to 36.72 inches, the expected adult height is 5 feet 7 inches.

The calculation for adult height is an approximation. Factors such as nutrition, genetics, and gender play a role in final height.

It is important to note that this calculation is just a guide and the actual adult height may differ from the predicted adult height.

To get a more accurate estimation of the expected adult height, it is recommended to have multiple height checks throughout childhood and take into account growth patterns.

To know more about genetics click on below link:

https://brainly.com/question/30459739#

#SPJ11

V to Inlogic

1. ABCD is a parallelogram

2. AB II CD

3. D is the midpoint of BE

4. AD II BC

5. ∠BAD = ∠CDE

6. AB = CD

7. BD = CE

8. AABD ACDE

A parallelogram is a four-sided shape with two pairs of parallel sides. Its opposite sides are equal in length, and its opposite angles are also equal. Its interior angles add up to 360 degrees. The defining property of a parallelogram is that both pairs of its opposite sides are parallel, meaning they never intersect. This is in contrast to a rectangle, which has four right angles and four sides of equal length, but its opposite sides are not parallel. A parallelogram is also different from a rhombus, which has all sides of equal length, but its opposite sides are not parallel.

Proof:  1. Given: ABCD is a parallelogram

2. Given: AB II CD

3. Given: D is the midpoint of BE

4. Since D is the midpoint of BE, BD = CE

5. Since ABCD is a parallelogram, AD II BC

6. Since AB II CD and AD II BC, ∠BAD = ∠CDE [Angle-Angle Postulate]

7. Since AB II CD and BD = CE, AB = CD [Side-Side-Side Postulate]

8. Therefore, AABD ACDE [Consecutive Angles Postulate]

To learn more about parallelogram

https://brainly.com/question/20526916

#SPJ1

According to the question the Statement and the Reasons is given below:

A statement is an assertion or declaration made by a person or group. It is a fact, opinion, or belief that is expressed as a sentence or short phrase. Statements are typically used to communicate ideas, opinions, facts, or beliefs. They can be used to make an argument, express a point of view, or inform someone of something. Statements can be found in a variety of contexts, including speeches, reports, documents, interviews, and conversations.

      Statement                      |                 Reasons.

1. ABCD, AB|CD                    | Given

2. D is the midpoint of BE    | Given

3. AD = DB                            | Definition of midpoint

4. AB + BD = AE                   | Segment addition postulate

5. AB + AD = AE                  | Substitution 3

6. AABD = ACDE                 | Segment addition postulate. Subtraction                
                                              postulate. Substitution 5.

To learn more about Statement
https://brainly.com/question/29070527
#SPJ1

Answer:

We know that 1 yard is equal to 3 feet. Therefore, 7 yards is equal to:

7 yards = 7 × 3 feet = 21 feet

So, 7 yards is greater than 20 feet.

To complete the table to model the answer, we can write:

Quantity Value

20 feet 20 ft

7 yards 21 ft

Comparing the values, we can see that 7 yards is greater than 20 feet.

Answer:

True

False

72

72

96

30

See below.

Step-by-step explanation:

First statement: True

A unit cube is a cube with an edge length of 1 unit.

Its volume is (1 unit)³ = 1 unit³

Second Statement: False

A unit cube cannot be used to measure the volume of "other 2D shapes" since a 2D shape has no volume. Only a 3D shape can have a volume. The word "other" is also used incorrectly.

Problems:

9 × 2 × 4 = 72; 72 cubic units

6 × 3 × 4 = 72; 72 cubic units

Length = 4; Width = 4; Height = 6

4 × 4 × 6 = 96; 96 cubic units

Length = 3; Width = 5; Height = 2

3 × 5 × 2 = 30; 30 cubic units

The most conservative cutover method when converting to a new system is the Phased Cutover.

This method allows for the implementation of the new system in multiple stages, thereby reducing risk. First, the new system is installed and tested. Next, a small portion of data is moved to the new system.

After data is moved, the new system is tested again. This process is repeated until all data has been moved and tested, and the new system is running smoothly.

Once the new system is running successfully, the old system is discontinued.

The phased cutover method ensures that the new system is functioning correctly, and gives time for system users to get used to the new system, before the old system is turned off.

To know more about cutover click on below link:

https://brainly.com/question/14179659#

#SPJ11

Answer:

Step-by-step explanation:

[tex]A=\frac{1}{2} h(a+b)[/tex]

[tex]24=\frac{1}{2} h(5+6)[/tex]

[tex]24=\frac{11} 2 h[/tex]                  

[tex]11h=48[/tex]                                (multiplied both sides by 2)

[tex]h=\frac{48}{11}=4\frac{4}{11}=4.36 units[/tex]      (divided both sides by 11)

In the multiple regression model with k regressors, the variance of the stochastic errors in the population can be estimated by the residual mean square (MSE).

         Multiple regression is a statistical tool that allows the researcher to estimate the relationship between multiple independent variables and a dependent variable. It measures the impact of a given independent variable on the dependent variable after controlling for the other independent variables.

        In simple linear regression, there is only one independent variable, whereas, in multiple linear regression, there is more than one independent variable.

         Residual mean square (MSE) is the variance of the error term (the difference between the predicted and observed values). It represents the average variance of the errors or the average deviation of the dependent variable from its predicted value.

         The MSE can be used to estimate the variance of the stochastic errors in the population. It is calculated by dividing the sum of squared residuals by the degrees of freedom (n-k-1)

           Where n is the sample size and k is the number of regressors.

Learn more about stochastic errors and multiple regression at: https://brainly.com/question/28178214

#SPJ11

The MCAT scores variable can predict some of the variation in the response variable.

The logistic regression model is a type of regression analysis that is widely used in various fields. A logistic model can be fitted using the glm() function in R. Now fit a logistic model with a single explanatory variable, MCAT scores.In logistic regression, the null deviance is the deviance for a model that has only the intercept. The null deviance will always be equal to the residual deviance if the model has only the intercept.The null deviance is calculated based on the difference between the saturated and null models' likelihoods. It is the amount of variation in the response variable that cannot be explained by the model when no predictor variables are used. When the single predictor variable MCAT scores is added to the null model, it reduces the null deviance by 11.59. This is significant because it indicates that the MCAT scores variable can predict some of the variation in the response variable.

Learn more about Predict

brainly.com/question/3623767

#SPJ11

The values of the expression when using the completing the square method is given below

To complete the square for x²-16x+c, we need to add and subtract the square of half the coefficient of x, which is (-16/2)² = 64. So:

x² - 16x + c = (x - 8)² - 64 + c

To complete the square, we added (-16/2)² = 64, but we subtracted it again to keep the expression equivalent. Therefore, c - 64 is the value that completes the square.

Similarly, for x² + 7x + c, we add and subtract (7/2)² = 49/4:

x² + 7x + c = (x + 7/2)² - 49/4 + c

So c - 49/4 completes the square.

For x²- 9x, we add and subtract (9/2)² = 81/4:

x² - 9x = (x - 9/2)² - 81/4

Therefore, c - 81/4 completes the square.

To factor x²- 14x, we can factor out x:

x² - 14x = x(x - 14)

To factor x² + 30x, we can factor out x:

x² + 30x = x(x + 30)

To factor x²- 9x, we can factor out x:

x² - 9x = x(x - 9)

To solve x² + 10x = 16 by completing the square, we first add and subtract (10/2)² = 25:

x² + 10x + 25 - 25 = 16

(x + 5)² = 41

x + 5 = ±√41

x = -5 ±√41

To solve x² - 3x = 7 by completing the square, we first add and subtract (3/2)² = 9/4:

x² - 3x + 9/4 - 9/4 = 7

(x - 3/2)² = 37/4

x - 3/2 = ±√(37/4)

x = 3/2 ±√(37/4)

To solve x² + 15x = 12 by completing the square, we first add and subtract (15/2)² = 225/4:

x² + 15x + 225/4 - 225/4 = 12

(x + 15/2)² = 129/4

x + 15/2 = ±√(129/4)

x = -15/2 ±√(129/4)

a. Let L be the length of the wading pool. Then its width is L - 12. The height is 1 foot, so the volume is:

V = L(L - 12)(1) = L² - 12L

b. To complete the square for the expression L² - 12L, we add and subtract (12/2)² = 36:

L² - 12L + 36 - 36 = (L - 6)² - 36

So the volume can be written as:

V = (L - 6)² - 36

To find the dimensions of the wading pool that give a volume of 108 cubic feet, we set V = 108 and solve for L:

(L - 6)² - 36

Learn more about completing the square on;

https://brainly.com/question/13981588

#SPJ1

Answer: y= x + 4

Step-by-step explanation:

The probability that the second chip drawn is red is 1/3.

The probability of drawing a red chip on the first draw is 6/10, or 3/5. After one chip is discarded, there are 9 chips remaining, 3 of which are red. So the probability of drawing a red chip on the second draw, given that a chip has already been discarded, is 3/9, or 1/3.

Therefore, the probability that the second chip drawn is red is 1/3. This is because the first chip drawn could be either white or red, so there are two possible scenarios. If the first chip drawn is white, there will be 6 red chips and 3 white chips left, so the probability of drawing a red chip on the second draw will be 6/9 or 2/3. If the first chip drawn is red, there will be 5 red chips and 4 white chips left, so the probability of drawing a red chip on the second draw will be 5/9. To get the overall probability of drawing a red chip on the second draw, we need to take the average of these two probabilities, weighted by the probability of the first chip being white or red, respectively.

The probability of the first chip being white is 4/10, or 2/5, and the probability of the first chip being red is 6/10, or 3/5. So the overall probability of drawing a red chip on the second draw is

(2/5) x (2/3) + (3/5) x (5/9) = 4/15 + 1/3 = 3/9 = 1/3.

Learn more about probability here

brainly.com/question/11234923

#SPJ4

As per the geometric sequence, the common ratio is -7.

Firstly, let's start with a brief introduction to what a sequence is. A sequence is simply a list of numbers that follow a certain pattern or rule. For example, the sequence 1, 3, 5, 7, 9 is a sequence of odd numbers.

Now, let's talk about a geometric sequence specifically.

Now, let's apply this to the sequence you were given: -3, 21, -192. To find the common ratio, we need to look at the ratio of any term to the previous term. For example, we can look at the ratio of the second term (21) to the first term (-3):

r = 21 / (-3) = -7

This means that the common ratio of the sequence is -7, since each term is found by multiplying the previous term by -7.

To know more about geometric sequence here

https://brainly.com/question/13008517

#SPJ4

Option A,B,C,D : Elias might have gotten the answer by calculating the percentage discounts of each item and comparing them to see which ones are the same.

To find which items have the same percent discount, we need to calculate the percent discount for each item.

For the sweater, the percent discount is (20/50) x 100% = 40%.

For the shorts, the percent discount is (12/30) x 100% = 40%.

For the shirt, the percent discount is (14/35) x 100% = 40%.

For the jeans, the percent discount is (24/60) x 100% = 40%.

Therefore, all items have the same percent discount of 40%, and option C (jeans and shirt only) is incorrect. The correct answer is A, sweater and shorts only, B, sweater, shorts, and shirt only, and D, sweater, shorts, and jeans only, have the same percent discount. Elias may have chosen C because he overlooked that the percent discount is the same for all items.

To learn more about discount please click on below link        

https://brainly.com/question/13501493

#SPJ1

Which items have the same percent discount?

A. sweater and shorts only

B. sweater, shorts, and shirt only

C. jeans and shirt only

D. sweater, shorts, and jeans only

Elias chose C as the correct answer. How might he have gotten that answer?

In circle , arc length is  18.84 ft and sector area = 75.36 ft .

What is arc?

In mathematics, an arc is referred to as a section of a circle's or curve's perimeter. The term "open curve" can also be used to describe it. The circumference, also known as the perimeter, is the measurement around a circle that defines its edge.

Length of an arc = Angle/360 * pi * diameter

                      =  135/360 * 3.14 * 16

                      = 18.84 ft

sector area = Angle/360 * π * r²

                    = 135/360 * 3.14 * 8 * 8

                   = 75.36 ft

Learn more about arc

brainly.com/question/18741430

#SPJ1

Answer: $5

Step-by-step explanation:

If you sell 3 shirts for $15 you would then just divide the 3 shirts into how much all together to get the price for each shirt for $5.

Promotion 50√2 (or about 70.7) coupons need to be sent in order to get 100 customers to make a purchase.

The given problem states that around 80% of customers who receive a promotion coupon will visit the store. But only 20% of those in the store will make a purchase.

The problem asks us to determine how many promotion coupons have to be sent in order to get 100 customers to make a purchase.

Therefore, let the number of coupons to be sent be x.

Then, 80% of x people will visit the store. Therefore, the number of people who will visit the store is

(80/100)x or (4/5)x people.

However, only 20% of those in the store will make a purchase.

Therefore, the number of customers who make a purchase is (20/100) x (4/5)x = (1/25)x² customers.

We need to find x such that (1/25)x² = 100.

Therefore, x² = 25 × 100. Hence, x = √2500 or x = 50√2.

for such more question on  promotion

https://brainly.com/question/11131986

#SPJ11

RMSE (Root Mean Squared Error) is a measure of the difference between predicted and actual values in a regression problem. It indicates the standard deviation of the residuals or prediction errors. In this case, we have an RMSE of 58.78 for the validation set and 57.12 for the test set.

The new data RMSE is likely to be within the range of the validation and test set RMSE values, but it's difficult to pinpoint an exact range without more information about the data and the model.

The test set RMSE is usually considered to be a more accurate estimate of the model's generalization error because it's calculated on a set of data that the model has not seen during training or validation.

It's important to note that the new data may have different characteristics or distributions compared to the validation and test sets, which can affect the RMSE. Therefore, it's recommended to monitor the model's performance on new data and adjust the model accordingly if necessary.

In conclusion, without additional information, we can assume that the new data RMSE will likely fall within the range of the validation and test set RMSE values, but we cannot provide an exact range without more context. It's important to continue monitoring the model's performance on new data to ensure its accuracy and reliability.

For more details about RMSE click here:

https://brainly.com/question/28331472#

#SPJ11

Y = 2x + 1, Z = (-1 + 219) / 15, and Z = (-1 - 219) / 15 are the equations to solve for the triangles that are supplied. The abbreviation is 4x2 + 11x - 8.

It's a good idea to have a backup plan in case the main one fails. Its longest side is the hypotenuse, which is also the side of the right triangle that faces the right angle. Height and base make form the two arms of a right angle.

To find z, use the quadratic formula: 15z2 + 6z - 8 = 4z.

Let's first put all the terms aside:

15z + 2z - 8 = 0

The quadratic formula is then used:

z = (-2 ± √(2² - 4(15)(-8))) / (2(15))

z = (-2 ± √(304)) / 30

reducing the radical

z = (-2 ± 4√19) / 30

z = (-1 ± 2√19) / 15

Hence, the answers to z are:

z = (-1 + 2√19) / 15

z = (-1 - 2√19) / 15.

To know more about triangle visit:-

brainly.com/question/2773823

#SPJ1

Therefore, for spheres of different sizes, we need to use different measuring units, unlike prisms and pyramids, where a unit cube can be used as a standard unit for all shapes with the same base and height.

Volume is a measure of the amount of space occupied by a three-dimensional object. It is the measure of the total amount of space that an object takes up. The standard unit of volume is the cubic meter (m³) in the International System of Units (SI), but other units such as cubic centimeters (cm³) and cubic inches (in³) are also commonly used. The volume of an object can be calculated using different formulas depending on its shape and dimensions.

Here,

A unit sphere is not a good unit of volume measurement for all spheres because spheres come in various sizes and diameters. The unit sphere has a radius of 1, and while it can be used to measure the volume of spheres with radii equal to 1, it cannot be used to measure the volume of spheres with different radii.

For example, if we want to find the volume of a sphere with a radius of 2, we cannot use the unit sphere as a measuring unit. Instead, we would need to use a larger sphere with a radius of 2 as our measuring unit.

To know more about volume,

https://brainly.com/question/12237641

#SPJ1

Every procedure that produces predictable results is considered an experiment, and the sample space (S) for an experiment is the collection of all possible results.

The possibility or chance that a particular occurrence will occur is expressed numerically as a probability. Probabilities can be expressed as proportions with a 0–1 range or as percentages with a 0%–100% range.

Probability theory, a branch of mathematics, is concerned with the study of random events. A random occurrence can take on any number of distinct shapes, but its conclusion cannot be predicted before it occurs. The way things came out is thought to have been influenced by chance.

To know more about probability visit:

https://brainly.com/question/29381779

#SPJ1

Answer:

t=36°

Step-by-step explanation:

90-54=36

opposite angles are equal so t=36°