Answer:
help me remove all the scammers on brainly by not clicking on such random scam links
Which type of precipitation is shown in the diagram below? How does this precipitation form?
Answer:
precipitation means water droplets may grow as a result of additional condensation of water vapor when the particles collide. If enough collisions occur to produce a droplet with a fall velocity which exceeds the cloud updraft speed, then it will fall out of the cloud as precipitation.
Explanation:
i knew this alr
A thermometer at room temperature is placed in cup of hot tea. What happens to the molecular kinetic energy of the molecules in the thermometer?
stays the same
•
decreases
increases
Answer:
increases
Explanation:
The energy increases (temp increases)....the molecules become further apart and the liquid expands up the graduated scale of the thermometer to show temp
Which of the following is a correctly balanced reaction equation?
-CaCl2+ NaOH -> NaCl2+ Ca(OH)
-CaCl2 + 2NaOH -> 2NaCl + Ca(OH)2
-CaCl2 + NaOH -> NaCI + Ca(OH)2
-2CaCl2 + 4NaOH -> 4NaCl + 2Ca(OH)2
Answer:
CaCl2 + 2NaOH -> 2NaCl + Ca(OH)2
Explanation:
If 23.5 g of ammonia (NH3) is dissolved in 1.0 L of solution, what is the molarity?
Answer:
1.38 M
Explanation:
Need to use the Molarity equation M=n/L
23.5g/ 17.031g/mol NH3 = 1.38 moles
1.38 moles/ 1.0 L = 1.38 M
Identify the tectonic plate boundaries.
convergent plate boundary and divergent plate boundary an island arc oceanic spreading ridge a trench and continental crust
Divergent boundaries and convergent boundaries are the opposite processes that occurs in the tectonic plates.
Difference between Divergent and convergent boundariesDivergent boundaries are the regions where new crust is formed when the plates pull away from each other while on the other hand, Convergent boundaries are the regions where crust is destroyed when one plate dives over another.
So we can conclude that Divergent boundaries and convergent boundaries are the opposite processes that occurs in the tectonic plates.
Learn more about tectonic plate here: https://brainly.com/question/1162125
An unknown organic compound composed of carbon, hydrogen and oxygen was analyzed and found to be 60% C, 8% H and the rest being oxygen Its molecular weight is found to be 300g What is its molecular formula?
Which of the following atoms has the least metallic character?
Answer:
The least metallic or most non-metallic element is fluorine.
Explanation:
hope this helps
pls mark brainliest
How many moles of LIF are contained in 10.0 L of a 7.50 M solution
The number of moles of LIF are contained in 10.0 L of a 7.50 M solution is 75 moles.
What is molarity?Molarity of any solution is define as the number of moles of solute present in per liter of volume of solution and it is represented as:
M = n/V
Given that, Molarity of LiF solution = 7.50 M
Volume of solution = 10L
On putting values on above equation, we get moles
n = (7.50)(10) = 75 moles
Hence required moles of LiF is 75 mol.
To know more about moles, visit the below link:
https://brainly.com/question/14469428
#SPJ1
True or False.....the number of protons in a stable atom is the same as the number of electrons it has.
Answer:
true
Explanation:
I would say true because it has an equal number of protons and electrons
Sorry if wrong..
Answer:
True
Explanation:
Protons and Electrons are equal if the atom is neutral or stable, which means it has a net charge of 0.
difference between insulin resistance and insulin sensitivity? with source and thank
Answer:
Insulin resistance and insulin sensitivity are two sides of the same coin. If you have insulin resistance, you have low insulin sensitivity. Conversely, if you are sensitive to insulin, you have low insulin resistance.
Explanation:
searched it hope it helps
What is the formal charge of F in CF4?
Answer:
zero
Explanation:
Answer:
Zero.
Explanation:
The overall formal charge in CF4 is zero.
15) A 12.0 g sample of helium gas occupies a volume of 12.6 L at a certain temperature and
pressure. What volume does a 24.0 g sample of neon occupy at these conditions of
temperature and pressure?
The required volume of sample of neon occupy at these conditions of temperature and pressure is 25.2L.
How do we convert grams into moles?Mass (W) in grams of helium gas will be converted into moles (n) by using the below equation:
n = W/M, where
M = molar mass = 4g/mol
Initial moles of helium gas:n = 12g / 4g/mol = 3 mol
Final moles of neon gas:n = 24g / 4g/mol = 6 mol
And for this question as pressure and temperature for both the conditions is constant so ideal gas equation becomes:
V₁/n₁ = V₂/n₂, where
V₁ = initial volume = 12.6 L
n₁ = initial moles = 3 mol
V₂ = final volume = ?
n₂ = final moles = 6 mol
On putting these values, we get
V₂ = (12.6)(6) / (3) = 25.2 L
Hence required volume of neon gas is 25.2 L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/3778152
#SPJ1
why does water boil at 100° Celsius while hydrogen sulphide boils at 58
degrees Celsius?
When vapor pressure reaches an equivalent value to the surrounding air pressure, the liquid(in this case water) will boil. When at sea level, vapor pressure is equal to the atmospheric pressure which is at 100 degrees celsius. Water has a high boiling point because water requires more energy to break its hydrogen bonds before it can boil to high.
Why are fossil fuels considered nonrenewable resources?
A. Because they are made from hydrocarbons
B. Because they are harmful to the environment
C. Because they take millions of years to recreate
D Because they are org&ic material
Answer:C they take millions of years to create
Explanation: Fossil fuels are created basically from the fossils of living organismorganisms and take millions of years to form
Because fossil fuels are made from the remains of ancient plants and other species that existed millions of years ago, they are considered a non-renewable resource. Therefore, the correct option is C.
They are formed as a result of the aggregation and compression of organic matter, including dead plants and bacteria, over a long period of time. Since this geological process takes millions of years to complete, it takes a very long time (compared to human lifetimes) for fresh fossil fuel resources to be generated. Once mined and used up, fossil fuel reserves such as coal, oil and natural gas cannot be replaced over time. Non-renewable resources are those that have a limited supply and take a long time to manufacture.
Therefore, the correct option is C.
Learn more about Non-renewable resources, here:
https://brainly.com/question/30135824
#SPJ4
Pure sodium metal explodes when it makes contact with water. In its natural state, chlorine is a deadly, poisonous gas. When these two chemicals combine, they form a harmless, white powder known as sodium chloride or table salt. Which of the following statements does this information support?
A.
Heat must be added in order to change the chemical properties of substances.
B.
When substances are chemically combined, the properties of the new substances that are formed are often different from the properties of the original substances.
C.
The properties of substances change during chemical reactions but then later go back to their original condition.
D.
When substances are chemically combined, the properties of the new substances that are formed are the same as the properties of the original substances.
Answer:
B) "When substances are chemically combined, the properties of the new substances that are formed are often different from the properties of the original substances."
Explanation:
From the information given, the question was juxtaposing how dangerous the reactants Sodium and Chlorine were at their elemental, natural states with how harmless the product is by combining both of them. There isn't any other statement beside B which is supported by this.
Usually however, most reactions that make NaCl are done through acid-base titrations because they form the salt and water when neutralized.
Answer:
B
Explanation:
All substances have their own unique chemical and physical properties. When substances are chemically combined (i.e., when substances undergo a chemical reaction), the properties of the new substances that are formed are often different from the properties of the original substances.
What is the pH of a 1 x 10^-5 M [OH-] solution
a. 3
b. 9
c. 5
d. 11
Answer:
I think this will help you
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
What is the molarity of a solution when 2.75 grams of NaCl is dissolved in 1100 ml of solution
State the second law of thermodynamics in words and express it mathematically defining all terms. (6 marks)
The second law of thermodynamics states, in part, that "every spontaneous activity in any isolated system always leads in a rise in the entropy of that system." Because the universe is an isolated system, this assertion may be represented mathematically as follows: (1.6-2)
- 5. Describe the general trend in atomic radil across a row of the periodic table.
Answer:
Across a row, atomic radii decreases.
Explanation:
It decreases because nuclear charge increases across a row, electrons are added to the same shell and shielding remains constant. Therefore the outer electrons are more attracted to the nucleus making the atom smaller.
If the reaction of 5.87 moles of potassium with excess hydrobromic acid was able to produce 2.49 mol H2, what is the percent yield of hydrogen gas? (3 points)
Unbalanced equation: K + HBr yields KBr + H2
1. 14.6%
2. 29.2%
3. 42.4%
4. 84.8%
Answer: 2. 29.2%
Explanation:
Molarity by dilution. Show steps
Answer:
[tex]V_2 = 0.0167L = 16.7 mL[/tex]
Explanation:
[tex]c_1 V_1 = c_2 V_2\\2.0 M \cdot 0.100L = 12M \cdot V_2\\V_2 = \frac{2.0M \cdot 0.100L}{12M} = 0.0167L = 16.7 mL[/tex]
at standard pressure, what is the temperature at which a saturated solution of NH4Cl has a concentration of 60g NH4CL/100 g H2O
Answer: Temperature = T, unknown
Saturated Solution, NH4Cl concentration = 60g/100g H2O = 0.6g NH4Cl/g H2O
Assume density of H2O = 1 g/ml
m = 0.6g NH4Cl/g H2O / 1 g/ml
m = 0.6g NH4Cl/ml
See the table of saturated solutions and identify the temperature at which the concentration of NH4Cl is 60g/100g H2O.
Explanation: The line on the graph on reference table G indicates a saturated solution of NH4CL as a concentration of 60. g NH4 Cl/100. g H2O
(d) What is the mass percentage of water in CdCl2.4H2O?
The mass percentage of water (H₂O) in cadmium chloride tetra hydratesolution is equal to the 28.2%.
How do we calculate mass percentage?Mass percentage of any substabce present in any solution will be calculated as:
Mass percent = (Mass of substance/Total mass of solution)×100%
According to the question,
Mass of water (H₂O) = 18.02 g/mol
Mass of solvent (CdCl₂.4H₂O) = 183.32 + 4(18.02) = 255.4 g/mol
On putting values, we get
Mass percent = (18.02 / 255.4) × 100% = 28.2%
Hence mass percent of water is 28.2%.
To know more about mass percent, visit the below link:
https://brainly.com/question/13896694
Water exists as a liquid in what temperature range?
Answer: between 0 degrees Celsius and 100 degrees celsius
Are physical changes and chemical changes qualitative or quantitative data?
Determine the rate of a reaction that follows the rate law: rate = k[A]^m[B]^n, where k = 1.5
What causes radiation heating?
A. Heat transfer through electromagnetic waves
B. Heat transfer through moving gases or liquids
C. Heat transfer through differences in temperatures
D. Heat transfer through contact between molecules
Answer:
No. A
Explanation:
cause due to the friction between both molecules heat is produced rapidly.
The answer is A) Heat transfer through electromagnetic waves.
Cause due to the friction between both molecules heat is produced rapidly.
What radiation does do to a person?Radiation can harm the DNA in our cells. Excessive doses of radiation can motivate Acute Radiation Syndrome (ARS) or Cutaneous Radiation accidents (CRI). High doses of radiation could also cause most cancers later in life.
Radiation is a mutagen, which finally can lead to cancer. Radiation can either kill cells or harm the DNA within them, which damages their capacity to reproduce and might in the end cause cancer. whilst radiation is a gift, excessive electricity debris bypasses your body.
Learn more about radiation here: https://brainly.com/question/24469662
#SPJ2
An investigator makes a graph of the loudness of a vibrating string over time:
The investigator can reach which conclusion about the different numbered times?
A
The string vibrated more intensely at time 3 than at time 2.
B
The string vibrated more intensely at time 2 than at time 3.
C
The string vibrated more intensely at time 4 than at time 2.
D
The string vibrated more intensely at time 1 than at time 2.
Answer:
A because time 3 is the highest peak than time 1-4 (-3)
Answer:
A. The string vibrated more intensely at time 3 than at time 2.
Explanation:
The largest mass of silver chloride precipitated is when excess silver ions are added to
A 25.0cm3 of 0.80M hydrochloric acid.
B 30.0cm3 of 0.30M iron(III) chloride solution.
C 50.0cm3 of 0.20M magnesium chloride solution.
D 50.0cm3 of 0.50M sodium chloride solution.
answer is B but have no clue why!
The largest mass silver chloride is precipitated when excess silver ions are added to 30.0cm3 of 0.30M iron(III) chloride solution.
What is a precipitation reaction?A precipitation reaction is a reaction in which an insoluble substance is obtained when two solutions are mixed together as a result of one of the products of the reaction being insoluble in water.
Silver chloride is an insoluble salt that will precipitate when a single silver salt is added to a soluble chloride salt.
In the above, the largest mass silver chloride is precipitated when excess silver ions are added to 30.0cm3 of 0.30M iron(III) chloride solution since iron (iii) chloride is a weak electrolyte.
Learn more about precipitation reaction at: https://brainly.com/question/7035326
Some water released 7800 J of energy when cooled from 78°C to 33°C. What was the mass of the water?
Answer:
-41. 47
Explanation:
m = q / Cp x T
m = Mass
q = Energy (or joules)
Cp = Heat Capacity
T = Change in Temperature
Water's heat capacity is always 4.18.
This is the formula you'll need for change in temperature:
Final - Initial
So, 33 - 78 = -45
m = 7800 / 4.18 x -45
= -41.47