Answer:
the answer is weight=10N
Answer:
[tex]\boxed {\boxed {\sf 9.8 \ Newtons}}[/tex]
Explanation:
Weight is also called the force of gravity. This force acts on all objects at all times, pulling them down toward the center of the Earth.
It is calculated by multiplying the mass by the acceleration due to gravity.
[tex]F_g=mg[/tex]
The mass of the object is 1 kilogram. This scenario is occurring on Earth, so the acceleration due to gravity is 9.8 meters per second squared.
m= 1 kg g= 9.8 m/s²Substitute the values into the formula.
[tex]F_g= 1 \ kg *9.8 \ m/s^2[/tex]
Multiply.
[tex]F_g= 9.8 \ kg*m/s^2[/tex]
Convert the units. 1 kilogram meter per second squared is equal to 1 Newton, so our answer of 9.8 kilogram meters per second squared is equal to 9.8 Newtons.
[tex]F_g= 9.8 \ N[/tex]
A 1 kilogram mass at Earth's surface weighs 9.8 Newtons.
A spherical ball of lead (density 11.3 g/cm 3) is placed in a tub of mercury (density 13.6 g/cm 3). Which answer best describes the result
The lead ball will float with about 17% of its volume above the surface of the mercury.
We know that density is defined as mass per unit volume of a substance. The density of a substance is an intrinsic property which can be used to identify a substance.
Given that Lead is less dense that mercury, we know that lead will float on mercury. Since the density of mercury is 13.6 g/cm3 and that of lead is 11.3 g/cm3, lead ball will float with about 17% of its volume above the surface of the mercury.
Learn more: https://brainly.com/question/12108425
Missing parts;
A spherical ball of lead (density 11.3 g/cm3) is placed in a tub of mercury (density 13.6 g/cm3). Which answer best describes the result?
A.The lead ball will float with about 83% of its volume above the surface of the mercury.
B.The lead ball will float with about 17% of its volume above the surface of the mercury.
C.The lead ball will float with its top exactly even with the surface of the mercury.
D.The lead will sink to the bottom of the mercury.
E.none of the above
I need your help with this question, it’s my final exam for physics
Answer:
●Bx=Bcos40
Bx=10 × 0.76
Bx=7.6
●By=Bsin40
By=10×0.64
By=6.4
Hope it will help you.
a. How fast should a boy of 40kg mass run so that the kinetic energy becomes 800J?
Answer:
[tex]k.e. = \frac{1}{2}mv {}^{2} \\ 800= \frac{1}{2} \times 40 \times v {}^{2} \\ 800 = 20v {}^{2} \\ v {}^{2} = 400 \\ v {}^{2} = 20ms {}^{ - 1} [/tex]
k.e. = kinetic energy
hope helpful <3
5) You pull a 10.0 kg wagon along a flat road. You exert a force of 80.0 N at an angle of 30.0 degrees above the horizontal while you move the wagon 10.0 m forward. The coefficient of friction between the wagon and road is 0.500. Calculate the work down by you and the work done by friction.
Can someone solve by showing the steps?
This question involves the concepts of work done and the frictional force.
a. Work done by the person is "692.82 N".
b. Work done by the frictional force is "490.5 N".
a.
Work done by the person can be given by the following formula:
[tex]W=FdCos\theta[/tex]
where,
W = work done by the person = ?
F = Force applied by the person = 80 N
d = distance traveled = 10 m
θ = angle between force and motion = 30°
Therefore,
[tex]W=(80\ N)(10\ m)Cos30^o[/tex]
W = 692.82 N
b.
Work done by the frictional force is given by the following formula:
[tex]W_f=fd\\W_f=\mu mgd[/tex]
where,
[tex]W_f[/tex] = work done by the frictional force = ?
μ = coefficient of friction = 0.5
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]W_f=(0.5)(10\ kg)(9.81\ m/s^2)(10\ m)[/tex]
[tex]W_f=490.5\ N[/tex]
Learn more about frictional force here:
https://brainly.com/question/1714663?referrer=searchResults
A pendulum is made from a long rod of mass M and length L with a solid sphere (ball) of mass m and radius R attached to one end. As measured from the top of the pendulum (the end of the rod without the sphere), how far down the rod is the center of mass of the pendulum located
Answer:
Explanation:
If we assume the rod and sphere are of uniform construction so that their individual centers of mass are at their geometric centers, and that the rod end is attached to the surface of the sphere.
Balance moments about the rod free end of the assembly with its parts
(M + m)Cx = M(L/2) + m(L + R)
Cx = (M(L/2) + m(L + R)) / (M + m)
What is the meaning of eddy currents in electromagnetic series?
Answer:
currents which circulate in conductors like swirling eddies in a stream in electromagnetic series....
How does a balanced chemical equation demonstrate the Law of Conservation of Mass? it shows that only physical changes follow the Law of Conservation of Mass it shows that only physical changes follow the Law of Conservation of Mass it shows that the properties of the elements stay the same after the reaction it shows that the properties of the elements stay the same after the reaction it shows that all compounds remain bonded after the reaction it shows that all compounds remain bonded after the reaction it shows that no atoms have been gained or lost during the reaction
Answer:
it shows that the properties of the elements stay the same after the reaction
it shows that the properties of the elements stay the same after the reaction
it shows that all compounds remain bonded after the reaction
it shows that all compounds remain bonded after the reaction
it shows that only physical changes follow the Law of Conservation of Mass
it shows that only physical changes follow the Law of Conservation of Mass
it shows that no atoms have been gained or lost during the reaction
it shows that no atoms have been gained or lost during the reaction
What is the birth rate of a population of 3000 chipmunks if 200 chipmunks are born each year?
o 0.022 births per chipmunk per year.
0.067 births per chipmunk per year.
O 0.82 births per chipmunk per year.
o 15 births per chipmunk per year.
Answer:
0.067 births per chipmunk per year
Explanation:
I took the test
if fire needs oxygen to burn, where does the sun get oxygen if there is no oxygen in space?
The sun is not a burning fire.
It's much much much hotter than that.
The sun's energy is the result of continuous nuclear fusion in it's core. We know how to do that on Earth, but the only thing we've been able to use it for so far is hydrogen bombs and other thermonuclear weapons.
Please Help
A car of mass 400 kais sped up from 10m/s to 30m/s in a time of 15 seconds
What is the starting KE?
what is the ending KE?
what is the work done to speed up the car?
what is the power of watts?
Explanation:
The initial kinetic energy [tex]KE_0[/tex] is
[tex]KE_0 = \frac{1}{2}mv_0^2 = \frac{1}{2}(400\:\text{kg})(10\:\text{m/s})^2[/tex]
[tex]\:\:\:\:\:\;\:= 2×10^4\:\text{J} = 20\:\text{kJ}[/tex]
The final kinetic energy [tex]KE[/tex] is
[tex]KE = \frac{1}{2}mv^2 = \frac{1}{2}(400\:\text{kg})(30\:\text{m/s})^2[/tex]
[tex]\:\:\:\:\:\:\:= 1.8×10^5\:\text{J} = 180\:\text{kJ}[/tex]
The work done W on the car is
[tex]W = \Delta{KE} = KE - KE_0[/tex]
[tex]\:\:\:\:\:\:\:= 180\:\text{kJ} - 20\:\text{kJ} = 1.6×10^5\:\text{J}[/tex]
The power expended P is
[tex]P = \dfrac{W}{t} = \dfrac{1.6×10^5\:\text{J}}{15\:\text{s}} = 10667\:\text{Watts}[/tex]
[tex]\:\:\:\:\:= 10.7\:\text{kW}[/tex]
PLSSS HELP IT'S VERY IMPORTANT FOR ME WILL MAKE AS BRAINLIEST
Fill in the blank
Valence electrons are______
"The answer is not electrons in the outer shells that are not filled!!"
Answer:
negatively charged particle
valence electron is a electron of an atom, located in the outermost shell (valence shell ) of the atom, that can be transferred to or shared with another atom.
True or False: Any wavelength of light would work for this experiment. Explain your response, including the term quantum or quantized.
Answer:
I think false I don't know if I right but I hoped this help
What is the word that is used to describe someone that is using a drug?
A: Sober
B: Crazy
C: High
D: Slumped
Helppp
Circuit connections can either be series or parallel. In a_____connections, there is only one path of electrons, loads that are connected have the same current passing through them.
Answer:
circuit
Explanation:
When tightening a bolt, you push perpendicularly on a wrench with a force of 185 N at a distance of 0.11 m from the center of the bolt. How much torque are you exerting relative to the center of the bolt
Explanation:
The torque exerted on the wrench is
[tex]\tau = Fd\sin{\theta} = Fd[/tex]
since the force is applied perpendicular to the wrench, in which sin90 = 1. The torque then is
[tex]\tau = (185\:\text{N})(0.11\:\text{m}) = 20.35\:\text{N-m}[/tex]
A cubical box with sides of length 0.368 m contains 1.980 moles of neon gas at a temperature of 298 K. What is the average rate (in atoms/s) at which neon atoms collide with one side of the container? The mass of a single neon atom is 3.35x10-26 kg.
The average rate at which the neon atoms collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].
The given parameters;
length of the cubical box, L = 0.368number of moles of the gas, n = 1.98temperature, T = 298 Kmass of the gas, m = 3.35 x 10⁻²⁶ kgThe average kinetic energy of the gas molecules is calculated as follows;
[tex]K = \frac{3}{2} \frac{R}{N_a} T\\\\K = \frac{3 \times 8.314\times 298}{2\times 6.022 \times 10^{23}} \\\\K = 6.17\times 10^{-21} \ J/atoms[/tex]
The average speed of the gas molecules is calculated as follows;
[tex]K = \frac{1}{2}mv_{rms}^2\\\\v_{rms} = \sqrt{\frac{2K}{m} } \\\\v_{rms} = \sqrt{\frac{2\times 6.17 \times 10^{-21}}{3.35\times 10^{-26}} } \\\\v_{rms} = 607 \ m/s[/tex]
The time of collision of the gas molecules with the walls of the container is calculated as follows;
[tex]t = \frac{2d}{v} \\\\t = \frac{2\times 0.368}{607} \\\\t = 0.0012 \ s[/tex]
The average rate at which the gases collide with a single wall out of the 3 identical walls is calculated as follows;
[tex]rate =\frac{1}{3} \times \frac{n \times N_a}{t} \\\\rate = \frac{1.98 \times 6.02 \times 10^{23} \ atoms}{3 \times 0.0012 \ s} \\\\rate = 3.31 \times 10^{26} \ atoms/s[/tex]
Thus, the average rate at which the gases collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].
Learn more here:https://brainly.com/question/17566463
please paraphrase this paragraph
As a conclusion we first learned what is Discrete Fourier Transform and
why is it very important in signal processing science as it helps us to convert the discrete signal from time domain into frequency domain and the inverse DFT does the opposite converting the signal from frequency domain back into time domain. We have also learned the difference between DFT and the FFT algorithm where the FFT is an efficient
algorithm created to simplify the DFT process as it is faster and more accurate. We also learned how to perform and implement this algorithm using Matlab,
Answer:
The importance of signal processing science as has been made clear. Since we now know that it help to convert discrete signal from time domain to frequency domain. Moreover, we are now aware of the difference in DF5 and FFT algorithms as well as the implementation in Matlab.
what is the velocity of this graph between points a and b? 0.0m/s 2.5m/s 5.0m/s 6.0m/s?
Answer:
Pick c is the right one
Explanation:
5.0m/s
A small, free-to-rotate magnet is placed in a strong magnetic field. In what orientation will it come to rest
Answer:
South-North
Explanation:
An initially stationary object experiences an acceleration of 6 m/s2 for a time of 15 s. How far will it travel during that time?
Free-fall Acceleration is -10 m/s^2
Answer:
Explanation:
s = s₀ + v₀t + ½at²
s = 0 + 0(15) + ½(6)(15²)
s = 675 m
Not sure what the free fall acceleration is needed for, but if the object is dropped from a high enough point, it will travel in 15 seconds
s = ½10(15²) = 2250 m if air resistance is ignored
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s . As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight.
Answer:
Explanation:
0.120 rev/s(2π rad/rev) = 0.24π rad/s
At the highest point of the arc, gravity must supply the required centripetal acceleration. As the normal force is 1/4 of his normal weight, then 3/4 of gravity acceleration must be used as centripetal acceleration
0.75g = ω²R
R = 0.75(9.81) / (0.24π)²
R = 12.942198...
R = 12.9 m
The radius of the circle is equal to 12.95m which is rotating with an angular velocity of 0.120 rev/s.
What is vertical circular motion?A body spins in a vertical circle so that its motion at different points is different from the motion of the body is said to be vertical circular motion.
The velocity and tension vary in maximum magnitude from the lowest to the highest position because of the effect of the gravitational force of the earth.
Given, the angular velocity of the Ferris wheel, ω = 0.120 rev/s
ω = 0.120 rev/s × 2π rad/rev
ω= 0.7536 rad/s
If r is the radius of the circle and 'm' is the mass of the jack.
From newton's second law of motion, the net force will be equal to
mg - N = mrω²
mg - (mg/4) = mrω²
r = 3g/4ω²
r = 3×9.81 / (4× 0.7536)
r = 12.95 m
Therefore, the radius of the circle in which the jack travels is equal to 12.95m.
Learn more about vertical circular motion, here:
https://brainly.com/question/22810476
#SPJ2
Your question is incomplete, most probably the complete question was,
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s. As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight. What is the radius of the circle in which Jack travels?
-
9 Two bodies of 6 kg and 4 kg masses have their
velocity 5i - 2j +10k and 10î – 2ġ +5ť,
respectively
. Then, the velocity of centre of me
(a) 5ỉ +23 - 8 (b) 7î+ 29 - 8
(2) 7î – 2į +8ỉ (d) 5î – 29 +8k
+
-
Answer:
I don't know he he.
just joking
CAN SOMEONE PLEASE HELP ME
Answer:
she will eventually slow down and come to a stop
The graph of an object's position over time is a horizontal line and y is not equal to 0. What must be true abou
motion? (1 point)
O The acceleration is constant and non-zero.
O The velocity is constant and non-zero.
0 The acceleration is negative
O The velocity is zero.
Answer:D: the velocity is zero
Explanation:
What is the formula of [tex]\underline{force}[/tex]in physics?
The formula of force is F = ma.
Force: This can be defined as the product of mass and acceleration. The S.I unit of force is Newton (N). Force is a vector quantity
Types of force
Friction forcePushPullUpthrustTensional force.
⇒ The formula of force is
F = ma................ Equation 1
⇒ Where:
F = forcem = mass of the bodya = accelerationHence, the formula of force is F = ma.
Learn more about force here: https://brainly.com/question/13370981
Before looking at the formula, Lets understand what is force?
Force:- Force can be defined as the cause of motion of an object. Force can change the shape, direction and velocity of an object.It's SI unit is NewtonThe formula used to find force is:
[tex] \sf \nrightarrow \: F=m×a[/tex]
Where,
F is forceM is mass of the bodyA is accelerationEquation in words:- Force applied on an object is directly proportional or equal to the product of the mass of object and the acceleration of object.
True or False: The basketball should be dribbled below the waist.
A. praised
B. scolded
C. rewarded
14. Reicon's parents admonished him for breaking their antique collection,
D. silenced
15. I am an advocate of anti-corruption movement in the country.
D. supporter
C. enemy
DirectioRead the statements below. Using context clues, identify the meaning
A. opponent
B. primer
highlighted words.
16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.
b. removes
d. proposes
A. continues
17. The country has a very tropical climate where it only has dry and wet
seasons similar to other countries in Southeast Asia
a. humid
b. cold
d. normal
-
c. comfortable
d. collected
a. new
c. outdated
18. The obsolete books and other references in the library resulted to the
removal in the shelves and inventory.
b. old
19. Beverages, such as juices, milk, beers and sodas, have increased in
,
due to low supply and importation issues.
a. drinks b. food
d. pastas
20. The luxurious life of my cousin in an exclusive subdivision in Ta
makes me inspired to dream and work hard for me to escape this unp
d.
a. ordinary b. fantastic
c. uncomfortable
c. bread
Help help me plis po summative test ko po ito plis help me
Answer:
14. scolded
15. supporter
16. i am not sure but I think it is removes
17. comfortable
18. outdated
19. drink
20. it can be fantastic or wealthy
Answer:
14. Reicon's parents admonished him for breaking their antique collection,
scolded15. I am an advocate of anti-corruption movement in the country.
supporter16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.
it is removes17. The country has a very tropical climate where it only has dry and wet
seasons similar to other countries in Southeast Asia
comfortable18. The obsolete books and other references in the library resulted to the
removal in the shelves and inventory.
outdated19. Beverages, such as juices, milk, beers and sodas, have increased in,due to low supply and importation issues.
drinks20. The luxurious life of my cousin in an exclusive subdivision in Ta makes me inspired to dream and work hard for me to escape this unp.
fantasticAn object is dropped from a vertical height of 1.89 m above the balcony level. What is the object’s speed when it is 2.20 m below the balcony level if 10.0% energy is lost due to the air resistance? Does it matter when to apply 10% loss before V calculations or after? [8.49m/s] [yes it does, 0.9Energy result in √0.9Velocity]
Answer:
The 10% must come off the energy, not the velocity
Explanation:
Change in height h = 1.89 + 2.20 = 4.09 m
Potential energy = mgh = m(9.81)(4.09) = 40.1m J
Friction losses 40.1m(0.10) = 4.01m J
Kinetic energy at end 40.1m - 4.01m = 36.1m J
KE = ½mv²
v = √(2KE/m)
v = √(2(36.1m)/m = √72.2
v = 8.4983...
v = 8.50 m/s
Wrte down the effect of humidity and temperature in the speed of sound....
Explanation:
the speed of sound is affected by temperature and humidity
A ball is thrown up onto a roof, landing 4 sec later at height of 20m above the release level. The balls path just before landing is angled at 60 degree with the roof.
a) find the horizontal distance d it travels.
b) what is the magnitude of the balls initial velocity?
c) what is the angle (relative to the horizontal) of the balls initial velocity?
Answer: 20
Explanation: