The magnitude of the momentum of the rifle due to recoil after firing is 0.13 kg*m/s. The negative sign indicates that the rifle recoils in the opposite direction of the bullet's motion, by the law of conservation of momentum.
According to the law of conservation of momentum, the total momentum before and after an event must be the same. In this case, the momentum of the rifle and the bullet before firing is zero because they are at rest. After firing, the momentum of the bullet is given by the product of its mass and velocity, which is:
p_bullet = m_bullet * v_bullet
= 0.050 kg * 600 m/s
= 30 kg*m/s
The momentum of the rifle due to recoil can be found by multiplying the negative of the bullet's momentum by the mass ratio of the rifle to the bullet since the total momentum must be zero:
p_rifle = -m_bullet/m_rifle * p_bullet
= -(0.050 kg)/(11.5 kg) * 30 kgm/s
= -0.13 kgm/s
To learn more about magnitude
https://brainly.com/question/14452091
#SPJ4
This moon phase occurs when the moon is increasing and seen as half illuminate from the Earth on the right side.
*
waxing cresent
first quarter
waning gibbous
third quarter
even though the electricity that powers them is generated primarily from burning fossil fuels, electric cars are still more efficient than gas-powered vehicles because:
Even though the electricity that powers them is generated primarily from burning fossil fuels, electric cars are still more efficient than gas-powered vehicles because they convert a higher percentage of their stored energy into kinetic energy, the energy of motion.
In comparison, gas-powered vehicles lose a significant amount of energy to heat and other forms of inefficiency through the combustion process.
Additionally, electric vehicles have regenerative braking, which captures some of the energy lost during braking and uses it to recharge the battery. This makes electric cars more energy-efficient and less polluting, even when powered by fossil fuels.
Learn more about electricity generation at
https://brainly.com/question/12985260
#SPJ4
a cave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 7.10 m: (a) the initially stationary spelunker is accelerated to a speed of 4.40 m/s; (b) he is then lifted at the constant speed of 4.40 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 73.0 kg rescue by the force lifting him during each stage?
The work done on the spelunker by the force lifting them during each stage is,
(a) 718 J
(b) 0 J
(c) -718 J
The kinetic energy is given by, K = (1/2)mv², where m is the mass and v is the velocity. Initially, the spelunker is at rest, so their initial kinetic energy is zero. The final kinetic energy is:
K = (1/2)mv² = (1/2)(73.0 kg)(4.40 m/s)² = 718 J
Therefore, the work done on the spelunker during the acceleration stage is: W = K - 0 = 718 J
The spelunker is lifted at a constant speed, so their kinetic energy remains constant. Therefore, the work done on the spelunker during this stage is zero.
W = 0 J
Finally, the spelunker is decelerated to a stop. The initial kinetic energy is,
K = (1/2)mv² = (1/2)(73.0 kg)(4.40 m/s)² = 718 J
The final kinetic energy is zero. Therefore, the work done on the spelunker during the deceleration stage is:
W = 0 - 718 J = -718 J
To know more about speed, here
brainly.com/question/14181667
#SPJ4
the sum of the second and eight term of an arithmetic progression is 52. if the difference between the third is. i common difference ii first term iii 20th term.
The common difference is (26-a)/4, the first term is (3a+26)/4, and the 20th term is (81a-494)/4.
What is the common difference?Let's call the first term of the arithmetic progression "a" and the common difference "d".
Then, the second term would be "a + d", the third term would be "a + 2d", and so on.
The second term is "a + d" and the eighth term is "a + 7d".
The sum of the second and eighth term is given as 52:
(a + d) + (a + 7d) = 52
Simplifying the equation:
2a + 8d = 52
Dividing both sides by 2:
a + 4d = 26
Now, to find the difference between the third terms:
The third term is "a + 2d".
The difference between the third and second term is the common difference "d".
So, d is the difference between (a + 2d) and (a + d).
d = (a + 2d) - (a + d)
d = a + 2d - a - d
d = d
Therefore, we know nothing about the difference between the third terms.
To find the values asked in the question:
i. The common difference is given as:
a + 4d = 26
4d = 26 - a
d = (26 - a)/4
ii. The first term can be found by substituting the common difference into the equation:
a + d = a + [(26 - a)/4] = (4a + 26 - a)/4 = (3a + 26)/4
iii. The 20th term can be found using the formula for the nth term of an arithmetic progression:
a_n = a + (n - 1)d
a_20 = a + 19d
Substituting the value of d:
a_20 = a + 19[(26 - a)/4]
a_20 = (81a - 494)/4
Learn more about arithmetic progression here: https://brainly.com/question/18828482
#SPJ1
a train is moving at a speed of 132kmph. if the length of the train is 110 meters, how long will it take to cross a railway platform 165m long?
It will take 7.50 seconds to cross a railway platform 165m long, when a train is moving at a speed of 132kmph. if the length of the train is 110 meters.
At the point when a train crosses a stage, the all out distance it covers is the amount of the length of the train and the length of the stage. The time it takes to cover this distance relies upon the speed of the train, which is given in km/h. We can change this over completely to m/s by duplicating by 1000/3600.
For this situation, the speed of the train is 132 km/h, which is around 36.67 m/s. The complete distance the train should cover is the length of the train in addition to the length of the stage, which is 110 m + 165 m = 275 m.
To ascertain the time it takes to cover this distance, we can utilize the equation: time = distance/speed. Subbing the given qualities, we get:
time = 275 m/36.67 m/s
≈ 7.50 s
Accordingly, it will require around 7.50 seconds for the train to cross the 165 m long stage, accepting that there is no postponement because of some other factors like speed increase or deceleration.
To learn more about speed and time, refer:
https://brainly.com/question/17153206
#SPJ4
a boy rides his bicycle 1.44 km. the wheels have radius 28.0 cm. what is the total angle (in radius) the tires rotate through during his trip?
The total angle (in radians) the tires rotate through during the trip is 2573.32 radians.
As given, a boy rides his bicycle 1.44 km. The wheels have a radius of 28.0 cm. We have to calculate the total angle (in radians) that the tires rotate through during his trip. Let us calculate the circumference of the tire with the given radius. We know that the circumference of the tire
=> 2πr= 2 × 22/7 × 28 cm
=> 176 cm
=> 1.76 meters
Now, the boy rode his bicycle for a distance of 1.44 km which is equal to 1440 meters. Let the number of times the tire rotates be N.
Then, from the above calculation, we know that the distance traveled by each tire in one rotation is the circumference of the tire. Thus the distance traveled by both tires in one rotation is
2 × 1.76 = 3.52 meters.
Therefore, the number of rotations of the tire, N = distance traveled by both the tires/distance traveled by the boy
= 1440 / 3.52= 409.09 approx.
Now, we know that in one rotation of the tire, the angle (in radians) that it rotates through is equal to 2π radians. Therefore, in N rotations, the angle rotated by the tire (in radians) is equal to 2πN.
Substituting the value of N, we have the Angle rotated (in radians)
=> 2 × 22/7 × 409.09= 2573.32 radians approx.
To learn more about Angle :
https://brainly.com/question/29506154
#SPJ11
a 0.40 kg mass is suspended from a spring, with a spring constant of 101.0 n/m. find the driving frequency which would cause resonance.
The driving frequency that would cause resonance in this mass-spring system is approximately 7.96 Hz.
Resonance occurs when the driving frequency of an external force matches the natural frequency of a system. In the case of a mass-spring system, the natural frequency is determined by the spring constant and the mass of the object attached to the spring.
The formula for the natural frequency of a mass-spring system is:
[tex]f = \frac{1}{2\pi} * \sqrt{(\frac{k}{m} )}[/tex]
Where:
f = natural frequency (in Hz)
k = spring constant (in N/m)
m = mass of the object (in kg)
π = pi, a mathematical constant approximately equal to 3.14
Given:
k = 101.0 N/m
m = 0.40 kg
Plugging in the values:
[tex]f = \frac{1}{2\pi} * \sqrt{(\frac{101.0}{0.40} )}[/tex]
[tex]f = (\frac{1}{2*3.14}) * \sqrt{(\frac{101.0}{0.40} )}[/tex]
f ≈ 7.96 Hz (rounded to two decimal places)
To know more about spring constant
brainly.com/question/14159361
#SPJ4
a student designs a clock using a mass and a spring. each oscillation of the mass advances the clock by one second. when the student builds the clock, he discovers he erred and each oscillation takes two seconds. what change can he make to fix the clock?
The student can fix the clock by increasing the spring constant by a factor of 4. This can be done by either increasing the stiffness of the spring or by adding more springs in parallel.
The spring constant (k) is a measure of the stiffness of a spring. It represents the amount of force required to stretch or compress a spring by a certain distance. The spring constant is defined as the ratio of the force applied to the displacement produced, and its unit is newtons per meter (N/m).
The spring constant is an important parameter in many physics applications, such as Hooke's law, which states that the force applied to a spring is directly proportional to the displacement of the spring. The spring constant can also be used to determine the potential energy stored in the spring when it is compressed or stretched. the spring constant is a fundamental concept in the study of mechanics and is used to describe the behavior of various mechanical systems that involve springs, such as in oscillators and in simple harmonic motion.
To know more about Spring constant visit here:
brainly.com/question/14670501
#SPJ4
Observing a set of pith balls with positive charges, how does the distance between the pith balls affect the electric electrical charge?
The greater the distance between the pith balls, the lesser the amount of electric charge that exists between them.
The distance between the pith balls will not affect the electric charge.
The lesser the distance between the pith balls, the greater the amount of electric charge that exists between them.
The greater the distance between the pith balls, the greater the amount of electric charge that exists between them.
The greater distance between the pith balls, the lesser the amount of electric charge that exists between them.
What happens when a pith ball is positively charged?When silk is used to rub a glass rod, some electrons are removed from the rod. As a result, the rod acquires a positive charge. Two pith balls are positively charged when a positively charged rod is touched to them.
How do the pith balls' charges impact the electrostatic force that exists between them?The pith balls are charged and brought into contact with one another. They charge equally and repel one another. The level of repulsion of the hung pith ball varies as the position of the movable pith ball is altered.
To know more about charge visit:-
https://brainly.com/question/11944606
#SPJ1
Answer:
(Question) Which of the following statements about electrical charges is true?
(Answer) Two positive charges repel each other.
(Question) Observing a set of pith balls with positive charges, how does the distance between the pith balls affect the electric electrical charge?
(Answer) The greater the distance between the pith balls, the greater the amount of electric charge that exists between them.
(Question) Which of the following interactions in the data set below will have an attractive electrical force?
(Answer) Interaction A and B
(Question) in which of the following interactions will the amount of force between the two objects be the strongest?
(Answer) Interaction A
(Question) Which of the following statements accurately reflects the relationship between force and distance in Coulomb’s Law?
(Answer) They are inversely proportional; as distance increases, the force between two charges will decrease.
Explanation:
i just finished the quick check
What is the initial velocity of a ball that is thrown downward at the rooftop of a 35 m building and falls to the ground after 2.25 s?
The initial velocity of the ball that was thrown downward from a height of 35 m is 4.53 m/s².
What is velocity?Velocity is the rate of change of displacement.
To calculate the initial velocity of the ball, we use the formula below,
Formula:
s = ut+gt²/2.................... Equation 1Where:
s = Distancet = Timeu = Initial velocityg = Acceleration due to gravityFrom the question,
Given:
t = 2.25 sg = 9.8 m/s² (Thrown upward)s = 35 mSubstitute these values into equation 1 and solve for u
35 = (2.25×u)+(9.8×2.25²)/235 = 2.25u+24.812.25u = 35-24.812.25u = 10.19u = 10.19/2.25u = 4.53 m/sHence, the initial velocity is 4.53 m/s².
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
BIG BEN and a little analog alarm clock both keep perfect time. Which minute hand has the bigger angular velocity, omega ? Big Ben little alarm clock Both have the same to
The minute hand is the hand on the watch that indicates minutes. The minute hand on an analogue clock displays the current minute number from 1 to 60. When the minute hand completes one full revolution of the clock face, it has covered 360 degrees of rotation or 2π radians of angular displacement.
When both the BIG BEN and a little analog alarm clock keep perfect time, both have the same angular velocity (omega). Therefore, the answer is both have the same to.What is angular velocity?Angular velocity refers to how quickly an object rotates or moves in a circular path.
It is calculated as the angular displacement per unit time (in radians per second or degrees per second). It is defined as the rate at which a point rotates around a centre of rotation or an axis, usually expressed in radians per second or degrees per second.
What is the minute hand?The minute hand is the hand on the watch that indicates minutes. The minute hand on an analogue clock displays the current minute number from 1 to 60. When the minute hand completes one full revolution of the clock face, it has covered 360 degrees of rotation or 2π radians of angular displacement
To learn more about : clock
https://brainly.com/question/25279049
#SPJ11
if the father's radio is 132 km from the radio station, and the daughter is 115 m from home plate, who hears the home run first? (assume that there is no time delay between the baseball being hit and its sound being broadcast by the radio station. in addition, let the speed of sound in the stadium be 343
From the calculations done, it is observed that the father hears the home run first.
Radio waves are the electromagnetic waves. The velocity of these waves is given by,
c = d/t
where,
c is speed
d is distance
t is time
Time taken by the girl to hear the home run is given by the formula,
t₁ = d₁/vs
where,
vs is the velocity of sound
t₁ = 115/343 = 0.34 s
Time taken by the father to hear the home run is given as,
t₂ = d₂/c = (132 × 10³)/(3×10⁸) = 4.4 × 10⁻⁴ s
As t₁ > t₂, the father hears the home run first.
To know more about time:
https://brainly.com/question/13370537
#SPJ4
5.e 0/1 mc point a capacitor is constructed of two identical conducting plates parallel to each other and separated by a distance d. the capacitor is charged to a potential difference of v0 by a battery, which is then disconnected. if any edge effects are negligible, what is the magnitude of the electric field between the plates?
The magnitude of the electric field between the plates is E = V0 / d.
A capacitor is constructed of two identical conducting plates parallel to each other and separated by a distance d. The capacitor is charged to a potential difference of V0 by a battery, which is then disconnected. If any edge effects are negligible, the magnitude of the electric field between the plates is given by:
E = V0/d,
where E is the electric field, V0 is the potential difference, and d is the distance between the plates.
Therefore, the magnitude of the electric field between the plates is V0/d.
The magnitude of the electric field between the plates of a capacitor can be calculated using the formula:
Electric Field (E) = Voltage (V) / Distance (d)
Given in the student question:
Voltage (V) = V0
Distance (d) = d
So, the magnitude of the electric field between the plates is E = V0 / d
For more such questions on electric field , Visit:
https://brainly.com/question/14372859
#SPJ11
The work of Warren Washington would be most likely to explain wich of the following phenomena
Gradual shift of North Magnetic Pole's position on Earth, steady rise in planet's average temperature and reduction in the Moon's light reflection.
What does Warren Washington create?Using climate models, Dr. Washington and his team were able to simulate the effects of physics on a number of weather-related factors, such as "how heat energy, water vapor, and chemicals travel between Earth's seas and the atmosphere." Following that, computers used data from climate models to predict changes in the atmosphere.
These models were utilised to back the 2007 Intergovernmental Panel on Climate Change (IPCC) report's findings that human behaviour directly affects the environment.
Dr. Washington and his group received the 2007 Nobel Peace Prize3 as a result.
To know more about Warren Washington, refer
https://brainly.com/question/19930662
#SPJ1
Note: The question given on the portal is incomplete. here is the complete question.
Question: The work of Warren Washington would be most likely to explain which of the following phenomena
Gradual shift of North Magnetic Pole's position on Earth
Steady rise in planet's average temperature
Reduction in the Moon's light reflection.
Increase in Moon light's reflection.
a bird grabs a clam, carries it in its beak to a considerable height, and then drops it on a rock below, breaking the clam shell. which is the correct energy conversion when the clam is dropped?
When the bird drops the clam from a height, the potential energy of the clam is converted into kinetic energy. As the clam falls, it gains kinetic energy and loses potential energy.
An object's kinetic energy is the type of energy it has as a result of motion. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.When the clam hits the rock, the kinetic energy is converted into other forms of energy, such as sound and heat, and the clam shell breaks.
Therefore, the correct energy conversion when the clam is dropped is from potential energy to kinetic energy, followed by a conversion of kinetic energy into other forms of energy.
To know more about bird drops
https://brainly.com/question/13613150
#SPJ4
a car travels up a hill at constant speed without skidding. the force acting on the car that pushes it up the hill is:
This force must be equal in magnitude to the component of the weight of the car that is parallel to the hill to maintain a constant speed without skidding.
The force of friction is given by the equation:
[tex]normal force = m * g * cos(\theta)[/tex]
Therefore, the force that pushes the car up the hill is:
pushing force = frictional force = coefficient of friction * m * g * cos(θ)
Frictional force arises due to the irregularities present on the surfaces in contact which interlock with each other when they are pressed together. This force acts parallel to the surface of contact and in the opposite direction of motion or intended motion.
Frictional force can be divided into two types: static friction and kinetic friction. Static friction is the force that must be overcome to start an object moving from rest, while kinetic friction is the force that opposes the motion of an object that is already moving. Frictional force has important implications in many everyday situations. For example, it allows cars to stop, helps us walk without slipping, and enables machines to operate.
To learn more about Frictional force visit here:
brainly.com/question/13707283
#SPJ4
from a height of 50 meters above sea level on a cliff, two ships are sighted due west. the angles of depression are 61o and 28o . how far apart are the ships?
In the given situation, the ships are sighted due west from a height of 50 meters above sea level on a cliff. The angles of depression are 61° and 28° . The two ships are approximately 56.38 meters apart.
Let AB and CD be the two ships, and let E be the point on the cliff where they are sighted. Then, we have:
From E, draw lines perpendicular to AB and CD, meeting them at points F and G, respectively.
Also, let the distance between the two ships be x meters.
Using the trigonometric ratios for the right-angled triangles EFB and EGC, we can write:
tan 28° = BF/EB and tan 61° = CG/EG
Multiplying the two equations, we get:
tan 28° × tan 61° = BF/EB × CG/EG
Substituting the values, we get:
(0.531) x = BF/EB × CG/EG
Thus, the distance between the two ships is given by:
x = 50/(BF/EB × CG/EG)
Therefore, we need to find the values of BF/EB and CG/EG.
Using the trigonometric ratios, we can write:
BF/EB = tan 61° and CG/EG = tan 28°
Substituting the values, we get:
BF/EB = 1.969 and CG/EG = 0.531
Therefore, the distance between the two ships is:
x = 50/(BF/EB × CG/EG)
x = 50/(1.969 × 0.531)
x = 56.38 meters (approximately)
Thus, the two ships are approximately 56.38 meters apart.
For more such questions on angles of depression, click on:
https://brainly.com/question/29772680
#SPJ11
use keplers 3rd law of planetary motion to find how long it takes neptune to revovle around the sun if it is 30.11 aus away for the sun show all your work
It takes Neptune approximately 2454645 seconds or about 60189 Earth days or about 164.8 Earth years to complete one revolution around the Sun.
Kepler's third law of planetary motion relates the period of revolution (T) of a planet around the Sun to its average distance from the Sun (a) as follows:
[tex]T^2 = (4π^2/GM) a^3[/tex]
where G is the gravitational constant, M is the mass of the Sun, and a is the average distance of the planet from the Sun.
We are given that Neptune is 30.11 AU away from the Sun. We need to convert this distance to meters, which is the standard SI unit of distance.
1 astronomical unit (AU) is defined as the average distance between the Earth and the Sun, which is approximately [tex]1.496 x 10^11[/tex] meters. Therefore,
30.11 AU = 30.11 x 1.496 x[tex]10^11[/tex] meters
= 4.508 x[tex]10^12[/tex] meters
We can now use Kepler's third law to calculate the period of revolution of Neptune around the Sun.
T^2 = [tex](4π^2/GM) a^3[/tex]
[tex]T^2 = (4π^2/ (6.6743 × 10^-11 m^3/kg s^2) × (1.989 × 10^30 kg)) × (4.508 × 10^12 meters)^3[/tex]
[tex]T^2 = 601900800000000 seconds^2[/tex]
Taking the square root of both sides gives:
T = sqrt(601900800000000 [tex]seconds^2)[/tex] = 2454645 seconds.
Learn more about Kepler's third law here:
https://brainly.com/question/30782279
#SPJ1
a helicopter, starting from rest, accelerates straight up from the roof of a hospital. the lifting force does work in raising the helicopter. an 840-kg helicopter rises from rest to a speed of 9.5 m/s in a time of 4.0 s. during this time it climbs to a height of 7.7 m. what is the average power generated by the lifting force?
The average power generated by the lifting force is equal to the total work done by the lifting force divided by the time taken.
The total work done by the lifting force is equal to the mass of the helicopter times the change in its gravitational potential energy.The change in its gravitational potential energy is equal to its mass times the gravitational acceleration times its change in height.
Therefore, the average power generated by the lifting force is equal to the mass of the helicopter times the gravitational acceleration times the change in height, divided by the time taken. In this case, the average power is equal to 840 kg times 9.81 m/s2 times 7.7 m, divided by 4.0 s, which is equal to 203 kW. Therefore, the average power generated by the lifting force is 203 kW.
know more about Acceleration here
https://brainly.com/question/12550364#
#SPJ11
a weight lifter lifts a 420-n set of weights from ground level to a position over his head, a vertical distance of 1.75 m. how much work does the weight lifter do, assuming he moves the weights at constant speed?
The work done by a weightlifter to lift a 420 N set of weights from ground level to a position over his head is 735 j.
To calculate the work done by a weightlifter who lifts a 420 N set of weights from ground level to a position over his head, a vertical distance of 1.75 m, assuming he moves the weights at a constant speed:
Use the formula given below:
W = F × d
where,
W = work done by the weightlifter
F = force applied
d = distance moved by the weightlifter
From the given data, the force applied by the weightlifter is 420 N, and the distance moved is 1.75 m.
W = 420 N × 1.75 m = 735 J
Therefore, the work done by the weightlifter is 735 J.
To know more about work click here:
https://brainly.com/question/24244140
#SPJ11
constant force is applied to an object, causing the object to accelerate at 5.50 m/s2 . what will the acceleration be if
The acceleration will be,
a) 11.00 m/s²
b) 2.75 m/s²
c) 5.50 m/s²
d) 22.00 m/s²
According to Newton's second law, the acceleration of an object is directly proportional to the force applied and inversely proportional to its mass. Therefore,
If the force is doubled, the acceleration will also double, resulting in an acceleration of 11.00 m/s².
If the object's mass is doubled, the acceleration will be halved, resulting in an acceleration of 2.75 m/s².
If both the force and the object's mass are doubled, the acceleration will remain the same, at 5.50 m/s².
If the force is doubled and the object's mass is halved, the acceleration will be quadrupled, resulting in an acceleration of 22.00 m/s².
To know more about acceleration, here
brainly.com/question/12574295
#SPJ4
--The complete question is, A constant force is applied to an object, causing the object to accelerate at 5.50 m/s2 . What will the acceleration be if
a) The force is doubled?
b) The object's mass is doubled?
c) The force and the object's mass are both doubled?
d) The force is doubled and the object's mass is halved?--
when we suddenly drop a heavy weight on a spring scale, the needle on the scale jumps and oscillates four times in exactly 2 s. what does this mean? (select all that apply.)
A heavy weight dropped suddenly on a spring scale makes the needle jump and oscillate four times in exactly 2 s. This means that The natural frequency is exactly 2rad/s, and The spring scale is underdamped. The correct answers are options b and c.
When a heavy object is suddenly dropped on a spring scale, it will produce an oscillation in the spring scale, making the needle jump and oscillate several times in a period of time.
When the needle jumps and oscillates four times in 2 s, we can deduce that the frequency of oscillation is 2 Hz.
The spring scale is underdamped since the needle oscillates several times before coming to rest, indicating that there is some damping in the system, but not enough to keep the system from oscillating.
The natural frequency is exactly 2rad/s. This is because the frequency of oscillation is directly proportional to the square root of the stiffness of the spring and inversely proportional to the mass of the object attached to the spring.
Therefore, options b and c are correct.
For more such questions on spring scale, click on:
https://brainly.com/question/30015441
#SPJ11
a crane is moving a honda from a point on the ground to the top of a building. if the honda weighs 1400 kg and it lifts the car with a constant velocity of 6.0 m/s, what is the power the crane exerts during this lift?
The power exerted by the crane during the lift is 82,404 watts.
To calculate the power exerted by the crane while lifting a 1400 kg Honda at a constant velocity of 6.0 m/s, follow these steps:
1. First, calculate the gravitational force acting on the Honda using the equation F = m * g, where F is the force, m is the mass of the Honda (1400 kg), and g is the acceleration due to gravity (approximately 9.81 m/s²).
F = 1400 kg * 9.81 m/s²
F = 13734 N
2. Next, calculate the work done by the crane to lift the Honda at a constant velocity. Work is given by the equation:
W = F * d, where W is the work done, F is the force calculated in step 1, and d is the distance traveled (which can be calculated as the velocity multiplied by time).
However, since the crane is lifting at a constant velocity, the work done equals the force applied.
W = F
W = 13734 J
3. Finally, calculate the power exerted by the crane. Power is given by the equation P = W / t, where P is the power, W is the work done (calculated in step 2), and t is the time taken to lift the Honda.
Since the Honda is lifted at a constant velocity of 6.0 m/s, the power can be calculated as P = F * v, where F is the force and v is the velocity.
P = 13734 N * 6.0 m/s
P = 82404 W
Therefore, the power exerted by the crane is 82,404 watts.
To know more about power click here:
https://brainly.com/question/30817666
#SPJ11
how is rotational inertia similar to inertia as we studied it in the previous chapters? how does torque affect rotation? explain the lever arm.
Rotational inertia is similar to inertia in that both deal with an object's resistance to changes in motion. Torque affects rotation by causing a change in an object's rotational motion. Lever arm refers to the distance between the axis of rotation and the point where a force is applied to an object.
Inertia is the tendency of an object to remain at rest or in uniform motion unless acted upon by an external force. Similarly, rotational inertia is an object's resistance to changes in its rotational motion. Both types of inertia depend on the mass of the object and the distribution of that mass relative to the axis of rotation.
Torque is defined as the force applied to an object multiplied by the distance from the axis of rotation. The greater the torque applied to an object, the greater the change in its rotational motion.
For example, if a wrench is used to apply a torque to a bolt, the bolt will either start to rotate or its rotational speed will increase.
In general, torque causes an object to experience an angular acceleration in the direction of the torque.
The lever arm determines the amount of torque that can be applied to an object. The longer the lever arm, the greater the torque that can be applied to an object.
Similarly, the shorter the lever arm, the smaller the torque that can be applied to an object.
In general, the lever arm is an important factor in determining how much torque can be applied to an object.
For more such questions on Rotational inertia, click on:
https://brainly.com/question/14001220
#SPJ11
you have a 0.500-m-long copper wire. you want to make an n-turn current loop that generates a 0.800 mt magnetic field at the center when the current is 0.900 a . you must use the entire wire. What will be the diameter of your coil?
A copper wire that is 0.500m long has to be transformed into an n-turn current loop that generates a 0.800mT magnetic field at the center when the current is 0.900A, the diameter of the coil is therefore 1.134n cm.
The magnetic field produced by a current loop is calculated using the formula B = (μ0 * n * I * A) / (2 * R), where B = magnetic field, μ0 = magnetic constant, n = number of turns, I = current, A = area of the loop, and R = radius of the loop.
To compute the radius R of the loop, the formula is R = (μ0 * n * I * A) / (2 * B). Area A of the loop = (π/4) * D², where D is the diameter of the loop. Therefore, R = (μ0 * n * I * (π/4) * D²) / (B * 2). The entire wire must be utilized, implying that its length is equal to the loop's perimeter, which is equal to the product of the diameter and π (D * π).
The length of the wire is 0.500m, so we can calculate the diameter D using the following formula: D = 0.5m / π = 0.1592m. The area A of the loop can now be calculated using the diameter D calculated above, Area A of the loop = (π/4) * D² = (π/4) * (0.1592m)² = 0.0199m².
Magnetic field B = 0.800mT = 0.0008T. The current I = 0.900A.The magnetic constant, μ0 = 4π x 10^-7 T m/A. So, R = (μ0 * n * I * A) / (2 * B) = (4π x 10^-7 T m/A * n * 0.900A * 0.0199m²) / (2 * 0.0008T)R = 0.0357n m.
To convert this into centimeters, we multiply by 100.R = 3.57n cm. When we substitute the value of the diameter D, we have: D = 3.57n cm / π = 1.134n cm. The diameter of the coil is therefore 1.134n cm.
To know more about magnetic field, refer here
https://brainly.com/question/23096032#
#SPJ11
a simple pendulum of length 2.00 m is used to measure the acceleration of gravity at the surface of a distant planet. if the period of such a pendulum is 7.00 s, what is the acceleration of gravity?
The acceleration of gravity on a distant planet can be calculated as follows;a= 4π²L / T²= 4 x (3.14)² x 2 / 7²= 0.357 m/s²So, the acceleration of gravity is 0.357 m/s².
A simple pendulum of length 2.00 m is used to measure the acceleration of gravity at the surface of a distant planet, if the period of such a pendulum is 7.00 s. Then, the acceleration of gravity is 0.357 m/s².What is a simple pendulum?A simple pendulum is a weight suspended from a pivot so that it can swing freely. The motion of a simple pendulum is a periodic, gravitational motion. The time for one complete cycle is known as the period of the pendulum. If the period and the length of the pendulum are known, the acceleration of gravity at that location can be determined.The formula to calculate acceleration of gravity is given below;a= 4π²L / T²Where;L = length of the pendulumT = time period of the pendulumπ = 3.14a= acceleration of gravity.
Learn more about acceleration of gravity here:
https://brainly.com/question/25757970
#SPJ4
describe an experiment that can measure the speed of sound using the difference between the speed of sound and that of light.
The Echo Method measures the time delay between a sound and its echo and calculates the speed of sound.
One examination that can gauge the speed of sound utilizing the distinction between the speed of sound and light is known as the Reverberation Strategy. In this examination, an amplifier is set at a known separation from a reflecting surface, for example, a structure or a precipice face. A receiver is put a separation from the amplifier, to such an extent that the time it takes for the sound to go to the reflecting surface and back to the mouthpiece can be estimated. This is finished by recording the time postpone between the first strong and the reverberation.
Then, a light source, like a laser, is pointed at a similar reflecting surface. A photodetector is put a known separation from the light source, and the time it takes for the light to make a trip to the reflecting surface and back to the photodetector is estimated. The contrast between the twice is the time it takes for the sound to head out to the reflecting surface and back to the amplifier.
By knowing the distance between the amplifier and the reflecting surface, as well as the time it takes for the sound to travel this distance, the speed of sound can be determined. Essentially, by knowing the distance between the light source and the reflecting surface, as well as the time it takes for the light to travel this distance, the speed of light can be determined. The distinction between the two paces is the speed of sound.
To learn more about Echo Method, refer:
https://brainly.com/question/29744669
#SPJ4
a pendulum oscillates with a frequency of 1.5 hz . what is its length? express your answer to two significant figures and include the appropriate units.
The length of the pendulum is approximately 1.04 m, rounded to two significant figures.
The period (T) of a pendulum is given by T = [tex]2π√(L/g)[/tex], where L is the length of the pendulum and g is the acceleration due to gravity (approximately 9.81 [tex]m/s^2[/tex]). The frequency (f) of the pendulum is simply the inverse of the period, so f = 1/T.
Given that the frequency of the pendulum is 1.5 Hz, we can calculate the period as follows: f = 1/T 1.5 Hz = 1/T T = 1/1.5 s T = 0.667 s Now, we can use the period formula to find the length of the pendulum: T = 2π√(L/g) 0.667 s =[tex]2π√[/tex]([tex]L/9.81 m/s^2[/tex]) 0.667 s/([tex]2π[/tex]) = [tex]√(L/9.81 m/s^2[/tex]) 0.106 [tex]s^2/m =[/tex] [tex]L/9.81 m/s^2 L[/tex]= 1.04 m
Therefore, the length of the pendulum is approximately 1.04 m, rounded to two significant figures. It's important to note that the length of a pendulum affects its period and, consequently, its frequency.
Learn more about frequency here:
https://brainly.com/question/29739263
#SPJ4
a lighter block and a heavier block sit on a frictionless surface. please answer the following questions about the final momenta and kinetic energies of the blocks for the given situations. both blocks are initially at rest. the same force f then pushes to the right on each block for 1 meter. which block has the larger final kinetic energy after the force acts?
The heavier block has the larger final kinetic energy after the force acts.
Here's the step-by-step explanation:
1. Both the lighter and heavier blocks are initially at rest, so their initial momenta and kinetic energies are both zero.
2. The same force F is applied to each block for a distance of 1 meter.
3. Since force and distance are the same for both blocks, they will both gain the same amount of work done on them (W = F × d).
4. Work done on an object is equal to the change in its kinetic energy (W = ΔKE).
5. As both blocks have the same amount of work done on them, they will both have the same increase in kinetic energy.
6. However, the heavier block initially had a higher mass, so its final kinetic energy will be larger than the lighter block's final kinetic energy. This is because kinetic energy is directly proportional to mass (KE = 0.5 × m × v^2).
To know more about kinetic energy, refer here:
https://brainly.com/question/26472013#
#SPJ11
a cup of hot coffee sits in a cool, well-insulated room. heat transfer between the coffee and air in the room causes the coffee to lose 1 kj of energy while the air gains 1 kj. which law of thermodynamics was violated?
The scenario described in the student question does not violate any law of thermodynamics. In fact, it is consistent with the First Law of Thermodynamics, which is also known as the Law of Energy Conservation.
The First Law of Thermodynamics states that energy cannot be created or destroyed, but it can be converted from one form to another. In this case, the heat transfer between the hot coffee and the cool air in the room is an example of energy being transferred from one object to another. The coffee loses 1 kJ of energy in the form of heat, while the air gains 1 kJ of energy. Since the energy lost by the coffee is equal to the energy gained by the air, the total amount of energy in the system remains constant, and there is no violation of the First Law of Thermodynamics.
It is important to note that the Second Law of Thermodynamics, which states that the total entropy of an isolated system can never decrease over time, is also not violated in this scenario. Entropy is a measure of the dispersal of energy, and in this case, the heat transfer from the coffee to the air results in an increase in the overall entropy of the system.
The heat transfer between the hot coffee and the cool air in the well-insulated room does not violate any law of thermodynamics. Instead, it follows the First Law of Thermodynamics, which deals with energy conservation, and is also consistent with the Second Law of Thermodynamics, as the overall entropy of the system increases.
Know more about Thermodynamics here:
https://brainly.com/question/1368306
#SPJ11