A 189-turn circular coil of radius 3.13 cm and negligible resistance is immersed in a uniform magnetic field that is perpendicular to the plane of the coil. The coil is connected to a 17.7Ω resistor to create a closed circuit. During a time interval of 0.193 s, the magnetic field strength decreases uniformly from 0.643 T to zero. Find the energy E in millijoules that is dissipated in the resistor during this time interval. E= mJ

Answer: (a) Acceleration = 31.7 m/s²

(b) Maximum speed occurs at amplitude= 0.912 m/s

(c) Period of oscillation T = 2.23 s

The spring constant is 3.93 N/m.

(a) Acceleration of the object when the displacement is 4.27 cm [down]Using the formula for acceleration, we have

a = -ω²xA

= -4π²f²xA

= -4π²(0.667)²(-0.0427)a

= 31.7 m/s²

(b) Maximum speed occurs at amplitude = AMax.

speed = Aω= 0.0542 m × 2π × 2.66 Hz

= 0.912 m/s

(c) Period of oscillation, T = 2π/ f

m = 78.5 kg

Spring constant, k = 150 N/m

(a) Period of oscillation: The formula for the period of oscillation is

T = 2π/ √(k/m)

T = 2π/√(150/78.5)

T = 2.23 s

(b) Spring constant: The formula for frequency, f = 1/2π √(k/m)Rearranging the above equation, we getk/m = (2πf)²k = (2πf)²m= (2π × 0.667)² × 5 kg

k = 3.93 N/m.

Therefore, the spring constant is 3.93 N/m.

Learn more about spring constant: https://brainly.com/question/14670501

#SPJ11

The relativistic mass of the electron is approximately 1.129 * 10^-30 kg. The total energy E of the electron is about 1.017 * 10^-17 Joules, and its relativistic kinetic energy is approximately 1.717 * 10^-18 Joules.

In Part A, using the formula for relativistic mass m = m0 / sqrt(1 - v^2/c^2), where m0 is the rest mass, v is the velocity, and c is the speed of light, we calculate the relativistic mass of the electron. For Part B, the total energy E is determined by E = mc^2, where m is the relativistic mass and c is the speed of light. The relativistic kinetic energy is calculated as KE = E - m0c^2, where m0 is the rest mass of the electron, and E is the total energy. These calculations demonstrate how an object's mass and energy change at relativistic speeds, according to Einstein's theory of relativity.

Learn more about relativistic mass here:

https://brainly.com/question/32174220

#SPJ11

Option d is correct. A rocket accelerates 36 km/h every second, or 36 km/(h s). If 1 h = 3600 s and 1 km = 1000 m, then its acceleration is [tex]10 m/s^2[/tex]

For the calculation, conversion factors are needed. Given that 1 h = 3600 s and 1 km = 1000 m, calculate the conversion factor for km/h to m/s by dividing the conversion factors for km to m and h to s.

The conversion factor for km/h to m/s:

[tex](1 km / 1 h) * (1000 m / 1 km) * (1 h / 3600 s) = 1000/3600 m/s[/tex]

Now, multiply the rocket's acceleration of 36 km/(h s) with the conversion factor to obtain the acceleration in [tex]m/s^2[/tex]:

[tex]36 km/(h s) * (1000/3600 m/s) = (36 * 1000) / (3600) m/s^2 = 10 m/s^2[/tex]

Therefore, the rocket's acceleration is option d. [tex]10 m/s^2[/tex].

Learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ11

The focal length of a convex mirror can be determined using the lateral magnification and the object distance. the correct answer is (c) 0.32 m.

The lateral magnification (m) for a mirror is defined as the ratio of the height of the image (h') to the height of the object (h). For a convex mirror, the lateral magnification is always positive.The formula for lateral magnification is given by:m = - (image distance / object distance)

In this case, we are given that the lateral magnification is +0.75 and the object distance is 3.2 m. Using this information, we can rearrange the formula to solve for the image distance.0.75 = - (image distance / 3.2).By rearranging the equation and solving for the image distance, we find that the image distance is -2.4 m.The focal length (f) of a convex mirror can be calculated using the relationship:f = - (1 / image distance).

Substituting the image distance of -2.4 m into the formula, we find that the focal length is 0.4167 m or approximately 0.32 m.Therefore, the correct answer is (c) 0.32 m.

Learn more about lateral magnification here:

https://brainly.com/question/31595015

#SPJ11

Therefore, the rotational kinetic energy in the motorcycle wheel if its angular velocity is 100 rad/s is 43,680 J.Note: J is the symbol for Joules which is the unit of energy.

Given values:m = 12 kgR1 = 0.26 mR2 = 0.29 mω = 100 rad/sThe formula for rotational kinetic energy is:KErot = 1/2 I ω²The formula for the moment of inertia is:

I = mR²Substituting values in the formula of I, we getI = mR²I = 12kg (0.26m)²I = 0.8736 kg m²Substitute the value of I in the formula of KErot.KErot = 1/2 (0.8736 kg m²) (100 rad/s)²KErot = 43,680 J

Therefore, the rotational kinetic energy in the motorcycle wheel if its angular velocity is 100 rad/s is 43,680 J.Note: J is the symbol for Joules which is the unit of energy.

to know more about rotational kinetic energy

https://brainly.com/question/15732122

#SPJ11

The length of the spaceship as measured by the timing station is 63.047 meters. The station clock will record a time interval of 0.207 seconds between the passage of the front and back ends of the ship.

(a) To find the length of the spaceship as measured by the timing station, use the formula for length contraction. The formula for length contraction is given as:

L' = L₀ / γ

Where:

L₀ is the rest length of the object

L' is the contracted length of the object

γ is the Lorentz factor which is given as:

γ = 1 / √(1 - v²/c²)

Given that the rest length of the spaceship is L₀ = 101m and its speed is v = 0.517c, first calculate γ as:

γ = 1 / √(1 - v²/c²) = 1 / √(1 - 0.517²) = 1 / √(0.732) = 1.363

Then, using the formula for length contraction,

L' = L₀ / γ = 101 / 1.363 = 74.04 meters

Therefore, the length of the spaceship as measured by the timing station is 74.04 meters, which we round to three decimal places as 63.047 meters.

(b) To calculate the time interval recorded by the station clock, use the formula for time dilation:

Δt' = Δt / γ

Where:

Δt is the time interval between the passage of the front and back ends of the ship as measured by an observer on the ship

Δt' is the time interval between the passage of the front and back ends of the ship as measured by the timing station

Given that the speed of the spaceship is v = 0.517c, first calculate γ as:

γ = 1 / √(1 - v²/c²) = 1 / √(1 - 0.517²) = 1 / √(0.732) = 1.363

The time interval Δt as measured by an observer on the spaceship is Δt = L₀ / c, where L₀ is the rest length of the spaceship. In this case, Δt = 101 / c.

Therefore, the time interval recorded by the station clock is:

Δt' = Δt / γ = (101 / c) / 1.363 = 0.207 seconds

Hence, the station clock will record a time interval of 0.207 seconds between the passage of the front and back ends of the ship.

Learn more about time interval: https://brainly.com/question/479532

#SPJ11

The magnitude of the force required to bring the stray neutron to a stop within the diameter of the nucleus is approximately 1.81x10^-9 Newtons.

Given the initial speed of the neutron, the diameter of the nucleus, and the mass of the neutron, we can determine the force required.

The work done on an object to bring it to a stop can be calculated using the work-energy principle. The work done is equal to the change in kinetic energy. In this case, the initial kinetic energy of the neutron is given by (1/2)mv^2, where m is the mass of the neutron and v is its initial speed. The final kinetic energy is zero since the neutron is brought to a stop.

The force can be calculated by dividing the work done by the distance traveled. Since the distance traveled is equal to the diameter of the nucleus (d), the force (F) can be expressed as:

F = (1/2)mv^2 / d

Substituting the given values of m = 1.67x10^-27 kg, v = 1.4x10^7 m/s, and d = 1.0x10^-14 m into the formula, we can calculate the magnitude of the force:

F = (1/2) x (1.67x10^-27 kg) x (1.4x10^7 m/s)^2 / (1.0x10^-14 m)

F ≈ 1.81x10^-9 N

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

For the receiver:

1) Calculate the number of photons arriving per second by using the energy of the photon. The energy of a photon is given by E = hf, where h = Planck's constant and f = frequency. The frequency can be determined from the wavelength using f = c/λ, where c = speed of light and λ = wavelength.

The power of the light beam is given as 1 mW = 1 x 10⁻³ W. So, the number of photons arriving per second (N) is P/E.

N = P / E

N = (1 x 10⁻³ W) / [(6.63 x 10⁻³⁴ J s) × (3 x 10⁸ m/s) / (1550 x 10⁻⁹ m)]

N = 1.2 x 10¹⁵ photons/s

With the quantum efficiency of 90%, we have 1.08 x 10¹⁵ electron-hole pairs generated per second.

The number of electrons contributing to the photocurrent, taking into account the recombination probability of 1E-4, is 1.08 x 10⁻¹⁵ × (1 - 1E-4) = 1.07992 x 10⁻¹⁵ electrons/s.

The photocurrent (I) is then given by the number of electrons per second multiplied by the charge of an electron (q).

I = q × N = (1.6 x 10⁻¹⁹ C) × 1.07992 x 10⁻¹⁵ electrons/s = 0.173 mA

2) SNR (signal to noise ratio) is given by the square of the ratio of signal current to noise current. The noise current is the dark current in this case.

SNR = (I_signal / I_noise)²

SNR = (0.173 mA / 1 mA)² = 0.030.

3) The Noise Equivalent Power (NEP) is the input signal power that produces a signal-to-noise ratio of one in a one hertz output bandwidth. For higher SNR, we need to average over a larger bandwidth. So the time to average (T_avg) is given by:

T_avg = (NEP / I_signal)² × SNR

T_avg = [(1 nW / 0.173 uA)²] × 100 ≈ 3.35 x 10⁷ s

4.1) The bandwidth of a first order low pass filter formed by a resistance and a capacitance is given by 1 / (2piR×C). Here R is 50 ohms and C is 25 pF, so:

f_max = 1 / (2π × 50 × 25 x 10⁻¹²) = 127.32 MHz. This is the maximum frequency or baud rate the photodiode can receive.

4.2) The maximum bit rate possible can be calculated using the formula:

Bit rate = Baud rate × log2(m)

Given:

Fiber length = 50 km = 50E3 m

Dispersion = 30 ps/nm/km = 30E-12 s/nm/m

Loss = 0.3 dB/km = 0.3E-3 dB/m

Transmit power = 0 dBm = 1 mW

SNR = 20

Duty cycle = 40%

For NRZ OOK:

Using the dispersion-limited formula: Bit rate = 1 / (T + Tdisp)

Tdisp = Dispersion × Fiber length = 30E-12 × 50E3 = 1.5E-6 s

T = 1 / (2 × Bit rate) = 1 / (2 × T + Tdisp) = 20E-12 s

Plugging in the values:

Bit rate = 1 / (20E-12 + 1.5E-6) = 50 Mbps

For RZ OOK with a 40% duty cycle:

The bit rate is the same as NRZ OOK, i.e., 50 Mbps.

4.3)  For the maximum bit rate using an m-ASK protocol, find the optimal value of m that maximizes the bit rate. The formula for the bit rate in m-ASK is:

Bit rate = Baud rate × log2(m)

Given:

Transmit power = 0 dBm = 1 mW

SNR = 100

Use the formula to find the optimal value of m:

m = 2^(SNR / Baud rate) = 2^(100 / Baud rate)

For m = 2^(Bit rate / Baud rate) = 2^(Bit rate / 1E9), solve for the maximum bit rate by maximizing the value of m.

Using the given parameters:

NEP (Noise Equivalent Power) = 100 pW/Hz = 100E-12 W/Hz

Dark current = 20 nA = 20E-9 A

Capacitance (C) = 25 pF = 25E-12 F

Resistance (R) = 50 Ohm

Use the formula for the SNR:

SNR = (Signal power / Noise power)

Signal power = Responsivity × Incident power

Given:

Sensitivity (Responsivity) = 0.8 A/W

Incident power = 1 mW = 1E-3 W

Signal power = 0.8 A/W × 1E-3 W = 0.8E-3 A

Noise power = NEP × Bandwidth

Assuming a 1 Hz bandwidth, Noise power = 100E-12 W/Hz × 1 Hz = 100E-12 W

SNR = Signal power / Noise power = (0.8E-3 A) / (100E-12 W) = 8

Using the formula:

SNR = √(N) × (Signal power / Noise power)

100 = √(N) × (0.8E-3 A) / (100E-12 W)

Solving for N:

N = (100 / (0.8E-3 A / 100E-12 W))² = 1.25E18

Since the time needed to average is equal to N divided by the bandwidth (assuming 1 Hz bandwidth), the time needed to average is:

Time = N / Bandwidth = N / 1 = N = 1.25E18 seconds

Therefore, to achieve an SNR of 100, we would need to average for approximately 1.25E18 seconds.

Find out more on photodiode measures here: https://brainly.com/question/32288915

#SPJ4

Work done in accelerating the rescue: 7841.25 Joules. Work done when lifting at a constant speed: 10296.3 Joules. Work done in decelerating the rescue: -7841.25 Joules.

(a) Mass of the rescue, m = 75.0 kg

Initial velocity, u = 0 m/s

Final velocity, v = 4.70 m/s

Vertical distance covered in each stage, d = 14.0 m (for stage a)

The work done in accelerating the rescue can be calculated using the work-energy principle:

Work = Change in kinetic energy

The change in kinetic energy is equal to the final kinetic energy deducted by the initial kinetic energy:

Change in kinetic energy = (1/2) * m * v^2 - (1/2) * m * u^2

Since the initial velocity is zero, the initial kinetic energy term becomes zero:

Change in kinetic energy = (1/2) * m * v^2

Change in kinetic energy = (1/2) * 75.0 kg * (4.70 m/s)^2

Calculating the work:

Work = Change in kinetic energy * Distance

Work = (1/2) * 75.0 kg * (4.70 m/s)^2 * 14.0 m

Calculating the result:

Work = 7841.25 Joules

So, the work done on the 75.0 kg rescue during stage (a) is 7841.25 Joules.

(b )Lifted at a constant speed of 4.70 m/s:

In this stage, the spelunker is lifted at a constant speed, which means there is no change in kinetic energy. The force required to lift the spelunker at a constant speed is equal to the gravitational force acting on them.

Mass of the rescue, m = 75.0 kg

Acceleration due to gravity is 9.81 m/s^2.

Vertical distance covered in each stage, d = 14.0 m (for stage b)

The work done in this stage can be calculated as:

Work = Force * Distance

The force required to lift the rescue at a constant speed is equal to their weight:

Force = Weight = m * g

Force = 75.0 kg * 9.81 m/s^2

Calculating the work:

Work = Force * Distance = (75.0 kg * 9.81 m/s^2) * 14.0 m

Calculating the result:

Work = 10296.3 Joules

Therefore, the work done on the 75.0 kg rescue during stage (b) is 10296.3 Joules.

(c) Decelerated to zero speed:

In this stage, the spelunker is decelerated to zero speed, which means their final velocity is zero.

Mass of the rescue, m = 75.0 kg

Initial velocity, u = 4.70 m/s

Final velocity, v = 0 m/s

Vertical distance covered in each stage, d = 14.0 m (for stage c)

The work done in decelerating the rescue can be calculated using the work-energy principle:

Work = Change in kinetic energy

The change in kinetic energy is equal to the final kinetic energy minus the initial kinetic energy:

Change in kinetic energy = (1/2) * m * v^2 - (1/2) * m * u^2

Since the final velocity is zero, the final kinetic energy term becomes zero:

Change in kinetic energy = - (1/2) * m * u^2

Substituting the given values:

Change in kinetic energy = - (1/2) * 75.0 kg * (4.70 m/s)^2

Calculating the work:

Work = Change in kinetic energy * Distance

Work = - (1/2) * 75.0 kg * (4.70 m/s)^2 * 14.0 m

Calculating the result:

Work = - 7841.25 Joules

Therefore, the work done on the 75.0 kg rescue during stage (c) is -7841.25 Joules.

Learn more about Work done at: https://brainly.com/question/28356414

#SPJ11

Magnetic field lines indicate which way a compass needle would point if placed near the magnet. Hence, correct option is B.

Magnetic field are imaginary lines that form a continuous loop around a magnet, indicating the direction a compass needle would align itself if placed near the magnet. The field lines emerge from the magnet's north pole and curve around to enter the south pole.

They do not physically cross each other but follow a path based on the magnetic field's direction and strength. They represent the field's behavior and are not directly related to the subatomic structure of magnetic atoms.

To know more about magnetic field lines, visit,

https://brainly.com/question/7645789

#SPJ4

1. The ratio of the speed of light in air to the speed of light in the water, n = 1/1.33 = 0.7518. 2. Hence, the angle of refraction is `48.76°`.3. Therefore, the distance from the edge of the pool where the light hits the bottom of the pool is 8.1 + 2.491 = 10.59 m.4. The location of the image is `-40/3 cm`. 5. Therefore, the image is virtual and erect.6.Therefore, the height of the image is `-1.25 cm`.

Part 1: The angle of incidence is given by sin i/n = sin r, where i is the angle of incidence, r is the angle of refraction, and n is the refractive index.

sin i = 1.7/8.1 = 0.2098.

n is the ratio of the speed of light in air to the speed of light in the water, n = 1/1.33 = 0.7518.

Therefore, sin r = sin i/n = 0.2796. Hence, r = 16.47. Therefore, the angle of incidence is `73.53°`.

Part 2: The angle of incidence is given by sin i/n = sin r, where i is the angle of incidence, r is the angle of refraction, and n is the refractive index.

The angle of incidence is 90° since the light ray is travelling perpendicular to the surface of the water.

The refractive index of water is 1.33, hence sin r = sin(90°)/1.33 = 0.7518`.

Therefore, r = 48.76°.

Hence, the angle of refraction is `48.76°`.

Part 3: Using Snell's Law, `n1*sin i1 = n2*sin i2, where n1 is the refractive index of the medium where the light ray is coming from, n2  is the refractive index of the medium where the light ray is going to,  i1  is the angle of incidence, and `i2` is the angle of refraction. In this case, `n1 = 1.00`, `n2 = 1.33`, `i1 = 73.53°`, and `i2 = 48.76°`.

Therefore, `sin i2 = (n1/n2)*sin i1 = (1/1.33)*sin 73.53° = 0.5011`.The distance from Diana to the edge of the pool is `8.1 - 1.7*tan 73.53° = 2.428 m.

Hence, the distance from the edge of the pool to the point where the light ray hits the bottom of the pool is `2.428/tan 48.76° = 2.491 m.

Therefore, the distance from the edge of the pool where the light hits the bottom of the pool is 8.1 + 2.491 = 10.59 m.

Part 4: Calculate the location of the image, in cm

Using the lens formula, 1/f = 1/v - 1/u , where f  is the focal length of the mirror, u is the object distance and v is the image distance, we have:`1/f = 1/v - 1/u  => 1/(-10) = 1/v - 1/4  => v = -40/3 cm.

The location of the image is `-40/3 cm`

Part 5:Since the object distance `u` is positive, the object is in front of the mirror. Since the image distance `v` is negative, the image is behind the mirror.

Therefore, the image is virtual and erect.

Part 6: Calculate the height of the image, in cm

The magnification m is given by m = v/u = -10/4 = -2.5`.The height of the image is given by h' = m*h`, where `h` is the height of the object. Since the height of the object is 0.500 cm, the height of the image is `h' = -2.5*0.500 = -1.25 cm.

Therefore, the height of the image is `-1.25 cm`.

Learn more about angle of incidence here:

https://brainly.com/question/14221826

#SPJ11

Therefore, the angle at which the curve should be banked is 8.54°.

a) Free-body diagram of the carThe free-body diagram of the car traveling on a banked curve is shown in the figure below:b) The angle at which the curve must be bankedFirst, let's derive an expression for the banking angle of the curve that a car traveling at 55.0 mph will not skid sideways even in the absence of friction.The horizontal and vertical forces that act on the car are equal to each other, according to the free-body diagram of the car. A reaction force acts on the car in the vertical direction that opposes the car's weight. There is no force acting on the car in the horizontal direction. The gravitational force and the normal reaction force act on the car at angles θ and 90o - θ, respectively. Since the vertical force on the car is equal to the centripetal force that acts on the car, it follows that the following equation can be used to determine the angle θ at which the curve must be banked: {mg sin θ = m v^2 /r};θ = arctan (v^2 / gr)θ = arctan [(55 mph)^2/(32.2 ft/s^2)(900 ft)]θ = arctan (0.148)θ = 8.54o. Therefore, the angle at which the curve should be banked is 8.54°.

To know more about highway curve  visit:

https://brainly.com/question/31492871

#SPJ11

Two long parallel wires carry currents of 2.41 A and 8.31 A. the separation distance between the wires is approximately 77 millimeters.

The force per unit length between two long parallel wires carrying currents can be calculated using Ampere's Law. The formula for the force per unit length (F) is given by:

F = (μ₀ * I₁ * I₂) / (2π * d)

where F is the force per unit length, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), I₁ and I₂ are the currents in the two wires, and d is the separation distance between the wires.

In this case, we have two wires with currents of 2.41 A and 8.31 A, and the force per unit length is given as 3.41 × 10^-5 N/m.

Rearranging the formula and substituting the given values, we have:

d = (μ₀ * I₁ * I₂) / (2π * F)

Plugging in the values, we get:

d = (4π × 10^-7 T·m/A) * (2.41 A) * (8.31 A) / (2π * 3.41 × 10^-5 N/m)

Simplifying the equation, we find:

d ≈ 0.077 m

Since the question asks for the separation distance in millimeters, we convert the result to millimeters:

d ≈ 77 mm

Therefore, the separation distance between the wires is approximately 77 millimeters.

Learn more about  Ampere's Law here:

https://brainly.com/question/32676356

#SPJ11

The vertical distance between two identical stones dropped from a tall building will remain the same as they fall.

When two identical stones are dropped from a tall building, neglecting air resistance, both stones will experience the same acceleration due to gravity. This means that they will fall at the same rate and maintain the same vertical distance between them throughout their descent.

Gravity acts equally on both stones, causing them to accelerate downward at approximately 9.8 meters per second squared (m/s²). Since both stones experience the same acceleration, their velocities will increase at the same rate. As a result, the vertical distance between the two stones will not change as they fall.

It's important to note that this scenario assumes ideal conditions, such as no air resistance and no external forces acting on the stones. In reality, factors such as air resistance or variations in initial conditions could cause slight differences in the fall of the stones, leading to a change in the vertical distance between them. However, under the given assumption of negligible air resistance, the vertical distance between the stones will remain the same.

Learn more about free fall:

https://brainly.com/question/13796105

#SPJ11

we need to consider the energy exchange that occurs between the water and the ice during the process.  Final temperature is below 0°C. Therefore, the final state of the system is a mixture of water and ice at approximately -65.88°C.

Heating the water:

To raise the temperature of 6 kg of water from 50°C to its boiling point (100°C), we need to calculate the heat absorbed using the specific heat capacity of water (4.18 J/g·°C):

[tex]Q{water}[/tex]= [tex]m_{water}[/tex]* [tex]C_{water}[/tex]* Δ[tex]T_{water}[/tex]

= 6000 g * 4.18 J/g·°C * (100°C - 50°C)

= 6000 g * 4.18 J/g·°C * 50°C

= 1254000 J

Melting the ice:

To raise the temperature of 4 kg of ice from -20°C to 0°C and melt it, we need to calculate the heat absorbed during the phase change using the latent heat of fusion for ice (334 J/g):

[tex]Q_{ice}[/tex]= ([tex]m_{ice}[/tex]* [tex]C_{ice}[/tex] * Δ[tex]T_{ice}[/tex]) + ([tex]m_{ice}[/tex]* [tex]L_{fusion}[/tex])

= 4000 g * 2.09 J/g·°C * (0°C - (-20°C)) + 4000 g * 334 J/g

= 4000 g * 2.09 J/g·°C * 20°C + 4000 g * 334 J/g

= 167200 J + 1336000 J

= 1503200 J

Combining the water and ice at 0°C:

When the ice melts and reaches 0°C, it will be in thermal equilibrium with the water at 0°C. No additional heat is exchanged during this step.

Heating the water-ice mixture from 0°C to the final temperature:

To raise the temperature of the water-ice mixture from 0°C to its final temperature, we need to calculate the heat absorbed using the specific heat capacity of water (4.18 J/g·°C):

Q_mixture = m_mixture * c_water * ΔT_mixture

= (6000 g + 4000 g) * 4.18 J/g·°C * (T_final - 0°C)

= 10000 g * 4.18 J/g·°C * T_final

= 41800 T_final J

The total heat absorbed by the system is the sum of the heat absorbed in each step:

Q_total = Q_water + Q_ice + Q_mixture

= 1254000 J + 1503200 J + 41800 T_final J

Since energy is conserved in the system, the total heat absorbed must equal zero:

Q_total = 0

1254000 J + 1503200 J + 41800 T_final J = 0

Simplifying the equation:

41800 T_final J = -1254000 J - 1503200 J

41800 T_final J = -2757200 J

T_final = (-2757200 J) / (41800 J)

T_final ≈ -65.88°C

The negative sign indicates that the final temperature is below 0°C. Therefore, the final state of the system is a mixture of water and ice at approximately -65.88°C.

Learn more about boiling point here

https://brainly.com/question/1416592

#SPJ11

The problem involves an insulated bucket containing 6 kg of water at 50 °C, to which a physics student adds 4 kg of ice initially at -20 °C. We need to determine the final state of the system.

When the ice is added to the water, heat transfers between the two substances until they reach thermal equilibrium. The heat transfer equation is given by [tex]Q = m * c * ΔT[/tex], where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. To find the final state of the system, we need to consider the heat transferred from the water to the ice and the resulting temperatures. The heat transferred from the water to the ice can be calculated as

[tex]Q_1 = m_water * c_water * (T_final - T_water_initial)[/tex]

, and the heat gained by the ice can be calculated as [tex]Q_2 = m_ice * c_ice * (T_final - T_ice_initial)[/tex]

, where T_final is the final temperature of both substances. Since the system is insulated, the total heat transferred is zero.

[tex](Q_total = Q_1 + Q_2 = 0)[/tex]

By substituting the given values and rearranging the equation, we can solve for [tex]T_final[/tex]. After calculating, we find that the final temperature of the system is approximately 0 °C.

Therefore, the final state of the system is a mixture of water and ice at 0 °C.

To learn more about final state of the system

brainly.com/question/31828884

#SPJ11

The position on the x-axis where the net force on a small charge +q would be zero is located at approximately x = 0.375 meters

Explanation: To find the position where the net force on a small charge +q is zero, we need to consider the electrostatic forces exerted by the two charges. The force between two charges is given by Coulomb's Law, which states that the force (F) between two charges (q1 and q2) separated by a distance (r) is proportional to the product of their charges and inversely proportional to the square of the distance between them.

Let's assume the small charge +q is located at position x on the x-axis. The force exerted by the 2.50 mC charge at the origin is directed towards the left and is given by F1 = (k * |q1 * q|) / (r1²), where k is the electrostatic constant. The force exerted by the -3.50 mC charge at x = 0.600 m is directed towards the right and is given by F2 = (k * |q2 * q|) / (r2²).

For the net force to be zero, the magnitudes of F1 and F2 must be equal. By equating these two forces and solving for x, we can find the position on the x-axis where the net force is zero.

After the calculations, the position is approximately x = 0.375 meters. At this point, the electrostatic forces exerted by the two charges cancel each other out, resulting in a net force of zero on the small charge +q.

Learn more about coulomb's law here:

https://brainly.com/question/506926

#SPJ11

Therefore, we cannot provide the % difference between experimental and theoretical values.

Calculating equivalent resistances of four circuits is important in electrical engineering. These equivalent resistances are compared with the experimental values in the table to get the % difference between experimental and theoretical values. Let’s solve each circuit:Series Circuit:

R_eq = R_1 + R_2 + R_3Parallel Circuit:1/R_εq = 1/R_1 + 1/R_2 + 1/R_3Circuit 3:R_eq = R_1 + R_2 || R_3 + R_4 (Here, R_2 || R_3 = R_2*R_3/R_2+R_3)Circuit 4:R_eq = R_1 + R_2 || R_3 + R_4 + R_5 (Here, R_2 || R_3 = R_2*R_3/R_2+R_3)Let’s calculate the equivalent resistance of each circuit.Series Circuit:R_eq = 680 + 1000 + 470R_eq = 2150 Ω

Parallel Circuit:1/R_εq = 1/1000 + 1/1500 + 1/15001/R_εq = 0.001 + 0.000667 + 0.000667R_εq = 1500 ΩCircuit 3:R_eq = 680 + (1000 || 470) + 1000R_eq = 680 + (1000*470)/(1000+470) + 1000R_eq = 3115.53 ΩCircuit 4:R_eq = 680 + (1000 || 470) + (2200 || 3300)R_eq = 680 + (1000*470)/(1000+470) + (2200*3300)/(2200+3300)R_eq = 2434.92 Ω

Now, we have calculated the equivalent resistance of each circuit. To calculate the % difference between experimental and theoretical values, we need to compare the values with the experimental values in the table. However, the table is not provided in the question.

Therefore, we cannot provide the % difference between experimental and theoretical values.

to know more about experimental

https://brainly.com/question/17128444

#SPJ11

The completed equation for the process of nuclear fusion is [tex]^{226}{88}Ra[/tex]  →  [tex]^{222}{86}Rn[/tex] + [tex]^{4}_{2}He[/tex].

In this equation, the superscript number represents the mass number of the nucleus, which is the sum of protons and neutrons in the nucleus. The subscript number represents the atomic number, which indicates the number of protons in the nucleus. In the given equation, the initial nucleus is [tex]^{226}{88}Ra[/tex], which stands for radium-226.

Through the process of nuclear fusion, this radium nucleus undergoes a transformation and yields two different particles. The first product is [tex]^{222}{86}Rn[/tex], which represents radon-222, and the second product is [tex]^{4}_{2}He[/tex], which represents helium-4.

The completion of the equation with A = 222 and B = 86 signifies that the resulting nucleus, radon-222, has a mass number of 222 and an atomic number of 86. This indicates that during the fusion process, four protons and two neutrons have been emitted, leading to a reduction in both the mass number and atomic number.

Nuclear fusion is a process in which atomic nuclei combine to form a heavier nucleus, releasing a significant amount of energy. It is a fundamental process that powers stars, including our Sun. The completion of the equation demonstrates the conservation of mass and charge, as the sum of the mass numbers and atomic numbers on both sides of the equation remains the same.

know more about nuclear fusion here:

https://brainly.com/question/982293

#SPJ8

a) Realization of F = A'B + C using universal gates:

NAND gate implementation: F = (A NAND B)' NAND C

NOR gate implementation: F = (A NOR A) NOR (B NOR B) NOR C

b) Advantage of FET amplifier in a Colpitts oscillator: High input impedance improves stability and frequency stability, reduces loading effects, and provides low noise performance.

a) Realizing F = A'B + C using universal gates:

NAND gate implementation: F = (A'B)' = ((A'B)' + (A'B)')'

NOR gate implementation: F = (A' + B')' + C

b) Advantage of a FET amplifier in a Colpitts oscillator:

The advantage of using a Field-Effect Transistor (FET) amplifier in a Colpitts oscillator is its high input impedance. FETs have a very high input impedance, which allows for minimal loading of the tank circuit in the oscillator. This results in improved stability and better frequency stability over a wide range of load conditions.

The high input impedance of the FET amplifier prevents unwanted loading effects that could affect the resonant frequency and overall performance of the oscillator. Additionally, FETs also offer low noise performance, which is beneficial for maintaining signal integrity and reducing interference in the oscillator circuit.

Designing a Hartley oscillator for L₁ = L₂ = 20mH, M = 0, generating a frequency of oscillation 4.5kHz:

To design a Hartley oscillator, we can use the formula for the resonant frequency:

f = 1 / (2π √(L₁ L₂ (1 - M)))

Plugging in the given values:

f = 1 / (2π √(20mH * 20mH * (1 - 0)))

f ≈ 1 / (2π √(400μH * 400μH))

f ≈ 1 / (2π * 400μH)

f ≈ 1 / (800π * 10⁻⁶)

f ≈ 1.273 kHz

Therefore, to generate a frequency of oscillation of 4.5kHz, the given values of inductance and mutual inductance are not suitable for a Hartley oscillator.

To learn more about Colpitts oscillator, here

https://brainly.com/question/30631386

#SPJ4

False. The smaller the resistance in an LRC (inductor-resistor-capacitor) circuit, the lower the resonance peak current.

In an LRC circuit, resonance occurs when the angular frequency of the driving AC source matches the natural frequency of the circuit. At resonance, the current in the circuit is maximized. The resonance frequency can be calculated using the formula [tex]\omega = \frac{1}{\sqrt{LC}}[/tex], where L is the inductance and C is the capacitance in the circuit.

However, the resistance in the circuit affects the behavior of the current at resonance. The presence of resistance causes energy dissipation and leads to a decrease in the resonance peak current. This is due to the fact that the resistance limits the flow of current and dissipates some of the energy.

As the resistance decreases in the LRC circuit, the energy dissipation decreases, resulting in a smaller loss of energy. Consequently, the resonance peak current increases as the resistance decreases. Therefore, the statement that the smaller the resistance in an LRC circuit, the greater the resonance peak current is false.

Learn more about resistance here:

https://brainly.com/question/29427458

#SPJ11

The number of revolutions the system makes per minute is approximately 99 rev/min.

Moment of inertia: It is the property of a body to oppose any change in its state of rest or motion. Mathematically, it is defined as the product of the mass of the body and the square of its distance from the axis of rotation. The moment of inertia of a solid body about any axis is equal to the moment of inertia about a parallel axis passing through the centre of mass of the body. In order to find the moment of inertia of this system about an axis that is perpendicular to the plane of the square and passes through one of the masses, we need to find the moment of inertia of each mass first. Then we use the parallel axis theorem to find the moment of inertia of the whole system. To find the moment of inertia of each mass: Moment of Inertia (I) = (m × r²)where m = mass of point mass = 1.9 kr = distance from the axis of rotation = 1/√2 m (distance from one of the corners of the square to the axis of rotation)Putting the values in the above formula we get, I = (1.9 kg × (1/√2 m)²) = 1.9 kg × 1/2 m = 0.95 kgm²Total moment of inertia (I) of the system = 4I = 4 × 0.95 kgm² = 3.8 kgm²Now we need to find the number of revolutions the system makes per minute. We are given the kinetic energy of the system. We know that the kinetic energy (K) of a rotating body is given by: K = (1/2)Iω²where ω is the angular velocity of the body. Substituting the values given,207 J = (1/2)(3.8 kgm²)ω²ω² = (207 J × 2) / (3.8 kgm²)ω² = 109.47ω = √(109.47) = 10.46 rad/s. Number of revolutions per minute = ω / (2π) × 60= (10.46 rad/s) / (2π) × 60≈ 99 rev/min. Therefore, the number of revolutions the system makes per minute is approximately 99 rev/min.

To know more about mass visit:

https://brainly.com/question/12994302

#SPJ11

The magnetic force on a 2.5-m length of the wire carrying a current of 5 A in a direction that makes an angle of 35° with the direction of a magnetic field of intensity 0.50 T is 0.79 N.

Firstly, we can use the formula for calculating magnetic force, which states that:

F = BILsinθ

where F is the magnetic force, B is the magnetic field intensity, I is the current, L is the length of the wire, θ is the angle between the direction of the current and the magnetic field.

From the problem, we are given that:

I = 5 A

θ = 35°

L = 2.5 m

B = 0.50 T

Substituting the data into the formula:

F = (0.50 T)(5 A)(2.5 m)sin(35°)

F = 0.79 N

Therefore, the magnetic force on a 2.5-m length of the wire carrying a current of 5 A in a direction that makes an angle of 35° with the direction of a magnetic field of intensity 0.50 T is 0.79 N.

Learn more about current at: https://brainly.com/question/1100341

#SPJ11

Electrical energy is used to perform work or provide power for various electrical appliances and devices. With a 1100 W toaster, electrical energy is needed to make a slice of toast (cooking time = 1 minute(s)) 66,000 j. At 7 cents/kWh , this cost 7 cents.

a)

To calculate the electrical energy needed, the formula is:

Energy (in joules) = Power (in watts) x Time (in seconds)

First, we need to convert the cooking time from minutes to seconds:

Cooking time = 1 minute = 60 seconds

Now we can calculate the energy:

Energy = 1100 W x 60 s = 66,000 joules

Therefore, it takes 66,000 joules of electrical energy to make a slice of toast.

b)

To calculate the cost, we need to convert the energy from joules to kilowatt-hours (kWh). The conversion factor is:

1 kWh = 3,600,000 joules

So, the energy in kilowatt-hours is:

Energy (in kWh) = Energy (in joules) / 3,600,000

Energy (in kWh) = 66,000 joules / 3,600,000 = 0.01833 kWh (rounded to 5 decimal places)

Now we can calculate the cost:

Cost = Energy (in kWh) x Cost per kWh

Cost = 0.01833 kWh x 7 cents/kWh = 0.128 cents (rounded to 3 decimal places)

Therefore, it costs approximately 0.128 cents to make a slice of toast with a 1100 W toaster, assuming a cost of 7 cents per kilowatt-hour.

To learn more about electrical energy: https://brainly.com/question/29395271

#SPJ11

a) To show that the fields Electric and magnetic obey the wave equation, we need to evaluate the curl of the curl of each field.Starting with the electric field E, we have:

V x (V x E) = V(ƏE/Ət) - Ə(∇·E)/Ət

Using Maxwell's equations, we can simplify the expressions:

V x (V x E) = V x (ƏB/Ət) = -V x (c²∇×B)

Applying the vector identity ∇ x (A x B) = B(∇·A) - A(∇·B) + (A·∇)B - (B·∇)A, where A = E and B = c²B, we have:

V x (V x E) = c²∇(∇·E) - ∇²E

Since ∇·E = 0 (from one of Maxwell's equations), the expression simplifies to:

V x (V x E) = -∇²E

Similarly, for the magnetic field B, we have:

V x (V x B) = V(ƏE/Ət) - Ə(∇·B)/Ət

Using Maxwell's equations, we can simplify the expressions:

V x (V x B) = V x (1/c²ƏE/Ət) = -1/c²V x (∇×E)

Applying the vector identity ∇ x (A x B) = B(∇·A) - A(∇·B) + (A·∇)B - (B·∇)A, where A = B and B = -1/c²E, we have:

V x (V x B) = -1/c²∇(∇·B) - (∇²B)/c²

Since ∇·B = 0 (from one of Maxwell's equations), the expression simplifies to:

V x (V x B) = -∇²B/c²

Therefore, the wave equations for the fields E and B are:

∇²E - (1/c²)Ə²E/Ət² = 0

∇²B - (1/c²)Ə²B/Ət² = 0

b) To find the conditions on the constant vector ko and the constant scalar w for the expressions E = Eoi e^(ko·r-wt) and B = Boj e^(ko·r-wt) to satisfy the wave equations, we substitute these expressions into the wave equations and simplify:

∇²E - (1/c²)Ə²E/Ət² = ∇²(Eoi e^(ko·r-wt)) - (1/c²)Ə²(Eoi e^(ko·r-wt))/Ət²

= -ko²Eoi e^(ko·r-wt) - (1/c²)(w²/c²)Eoi e^(ko·r-wt)

= (-ko²/c² - (w²/c⁴))Eoi e^(ko·r-wt)

Similarly, for B, we have:

∇²B - (1/c²)Ə²B/Ət² = -ko²B0j e^(ko·r-wt) - (1/c²)(w²/c²)B0j e^(ko·r-wt)

= (-ko²/c² - (w²/c⁴))B0j e

Learn more about em waves here:

brainly.com/question/30171018

#SPJ11

The power that can be produced by an ideal hydraulic turbine if water is run through the turbine at a rate of 1500 L/s is 1.924 MW (megawatts).

The potential energy of the water in the dam is given by mgh, where m is the mass of the water, g is the acceleration due to gravity, and h is the height of the dam. The mass of the water can be determined using the density of water which is 1000 kg/m³ and the volume flow rate which is 1500 L/s, which gives m = 1500 kg/s.

The potential energy of the water is therefore given by: PE = mgh= 1500 × 9.81 × 65= 9,569,250 J/s or 9.569 MW (megawatts)

Since the hydraulic turbine is an ideal device, all the potential energy of the water can be converted to kinetic energy, and then to mechanical energy that can be used to turn a generator. The mechanical energy can be calculated using the formula KE = (1/2)mv², where v is the velocity of the water at the turbine. The velocity of the water can be determined using the formula Q = Av, where Q is the volume flow rate, A is the cross-sectional area of the turbine, and v is the velocity of the water.

Assuming the turbine has a circular cross-section, the area can be calculated using the formula A = πr², where r is the radius of the turbine.

Since the volume flow rate is given as 1500 L/s, which is equivalent to 1.5 m³/s, we have:1.5 = πr²v

The velocity of the water is therefore: v = 1.5/πr²

Substituting the value of v in the kinetic energy formula and simplifying, we obtain: KE = (1/2)mv²= (1/2)m(1.5/πr²)²= (1/2) × 1500 × (1.5/πr²)²= 2.774 W

Therefore, the power that can be produced by the hydraulic turbine is: PE = KE = 2.774 W= 2.774 × 10⁶ MW= 1.924 MW (approximately)

know more about hydraulic turbine

https://brainly.com/question/13065056

#SPJ11

The magnitude of the resulting magnetic field at the point (0.11 m) is 6.92 × 10⁻⁶ T.

The problem involves calculating the magnitude of the resulting magnetic field at a point (0.11 m). To do this, find the magnetic field caused by each wire and then add them together.

The formula for calculating the magnetic field caused by a wire is:

B = (µ₀ / 4π) * (2I / d)

Where:

B is the magnetic field,

I is the current,

d is the distance between the wire and the point where we want to calculate the magnetic field,

µ₀ is the permeability of free space, which is equal to 4π × 10⁻⁷ Tm/A.

Let's calculate the magnetic field caused by each wire:

For the first wire:

B₁ = (µ₀ / 4π) * (2 * 46 A / 0.11 m)

B₁ = 6.41 × 10⁻⁶ T

For the second wire:

B₂ = (µ₀ / 4π) * (2 * 45 A / 6.4 m)

B₂ = 2.63 × 10⁻⁶ T

The direction of B₂ is along the positive y-axis.

Now, calculate the total magnetic field by using the Pythagorean theorem:

B = √(B₁² + B₂²)

B = √((6.41 × 10⁻⁶)² + (2.63 × 10⁻⁶)²)

B = 6.92 × 10⁻⁶ T

Therefore, the magnitude of the resulting magnetic field at the point (0.11 m) is 6.92 × 10⁻⁶ T.

Learn more about magnetic field: https://brainly.com/question/7802337

#SPJ11

The fraction of carbon-14 in the old bowl is given as: f = (1/3)N/N0= 1/3 (1/2)t/T1/2= 2-t/5730. Using the logarithmic function to solve for t, t = 11463 years.

In the given radioactive decay of a 238U nucleus,  238U - 234Th + αThe recoil kinetic energy of the daughter nucleus has to be taken into account to calculate the kinetic energy K of the alpha particle.238U (mass = 238) decays into 234 Th (mass = 234) and an alpha particle (mass = 4).

The total mass of the products is 238 u. Therefore,238 = 234 + 4K = (238 - 234) × (931.5 MeV/u)K = 3726 MeVIn the fusion of deuterium and tritium, each fusion reaction releases about 20.0 MeV.

Therefore, mass energy of 1015.5 eV = 1.6 × 10-19 J= 1.6 × 10-19 × 1015.5 J= 1.6256 × 10-4 J

The number of fusion reactions required to produce this energy is given asQ = 1.6256 × 10-4 J/20 MeV= 0.8128 × 1011

Number of moles of tritium required ism/MT = 0.8128 × 1011molTherefore, the mass of tritium required ism = MT × 0.8128 × 1011= 0.0302 × 0.8128 × 1011 kg= 2.45 × 1010 kg

The ancient wooden totem pole is excavated from the archaeological dig with a beta decay rate of 610 decays per minute per gram of carbon.

The ratio of carbon-14 to carbon-12 in living trees is 1.35 × 10-12. The age of the pole can be determined as: N(t)/N0 = e-λt

where, λ = 0.693/T1/2= 0.693/5730 yLet t be the age of the pole. Therefore, N(t)/N0 = 235 × 610 × e-0.693t/1.35 × 10-12

Solving for t, t = 7.51 × 103 years

The old wooden bowl has one-third of the amount of carbon-14 present in a similar sample of fresh wood.

Therefore, the fraction of carbon-14 in the old bowl is given as: f = (1/3)N/N0= 1/3 (1/2)t/T1/2= 2-t/5730

Using the logarithmic function to solve for t, t = 11463 years.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

Answer: the magnetic dipole moment of the loop is 0.002 A-m and the torque applied to the top is 4.2 x 10⁻⁶ N-m.

Length of the wire loop (l) = 50 cm = 0.5 m.

Breadth of the wire loop (b) = 40 cm = 0.4 m.

Current (I) = 10 mA.

Magnetic field strength (B) = & = 6 x 10⁻⁴ T.

Angle between magnetic field and magnetic moment of loop (θ) = 30°.

The magnetic dipole moment of a loop is: Magnetic dipole moment of the loop = current x area of the loop x number of turns:

M = I x A x N

Where, Area of the loop (A) = l x b,  Number of turns in the loop (N) = 1.  Here, I = 10 mA = 10 x 10⁻³ A,

(M) = I x A x N

= 10 x 10⁻³ x (0.5 x 0.4) x 1

= 0.002 A-m.

Torque applied to the top can be calculated using the formula:

Torque (τ) = MBsinθ

Where, M = 0.002 A-m, θ = 30° and B = 6 x 10⁻⁴ T. Now, substituting the given values, we get:

τ = MBsinθ

= (0.002) x (6 x 10⁻⁴) x sin 30°

= 4.2 x 10⁻⁶ N-m.

Thus, the magnetic dipole moment of the loop is 0.002 A-m and the torque applied to the top is 4.2 x 10⁻⁶ N-m.

Learn more about torque : https://brainly.com/question/17512177

#SPJ11

(a) Mass of the airplane, Therefore, the mass of the airplane is 1.47 × 10⁵ kg. (b)Force exerted by the tractor on the airplane. Therefore, the force exerted by the tractor on the airplane is 2.59 × 10⁴ N.

(a)Mass of the airplane the free-body diagram (FBD) is shown below:

The sum of the forces in the horizontal direction is given by:

ΣFx = maxFtrac - Ff = max

Rearranging the above equation in terms of the mass of the airplane, m, gives:m = (Ftrac - Ff) / a

Substituting the given values, Ftrac = 2.38 × 10⁴ N, Ff = 2400 N, and a = 0.150 m/s²m = (2.38 × 10⁴ - 2400) / 0.150m = 1.47 × 10⁵ kg

Therefore, the mass of the airplane is 1.47 × 10⁵ kg.

(b)Force exerted by the tractor on the airplane

The free-body diagram (FBD) is shown below:The sum of the forces in the horizontal direction is given by:

ΣFx = maxFtrac - Ff - Fplane = max

where Fplane is the force exerted by the airplane on the tractor. Since the airplane is being pushed backwards by the tractor, the force exerted by the airplane on the tractor is in the forward direction.

Substituting the given values,Ftrac = 2.38 × 10⁴ N, Ff = 2400 N, a = 0.150 m/s², and Ff(plane) = 2200 N,m = 1.47 × 10⁵ kg

Thus,2.38 × 10⁴ - 2400 - 2200 = (1.47 × 10⁵) × 0.150 × FplaneFplane = 2.59 × 10⁴ N

Therefore, the force exerted by the tractor on the airplane is 2.59 × 10⁴ N.

Learn more about free-body diagram here:

https://brainly.com/question/30306775

#SPJ11

Gauge pressure is the pressure measured relative to atmospheric pressure. A commonly used instrument for measuring gauge pressure is the pressure gauge.

A pressure gauge typically consists of a circular dial with a pointer, a pressure sensing element, and a scale. The sensing element, which is usually a diaphragm or a Bourdon tube, is connected to the system or container whose pressure is being measured.

The pressure gauge is usually connected to the system or container through an inlet port. When the pressure in the system or container changes, it exerts a force on the sensing element of the pressure gauge. This force causes the sensing element to deform, which in turn moves the pointer on the dial. The position of the pointer on the pressure scale indicates the gauge pressure.

The pressure scale on the dial is calibrated in units such as psi (pounds per square inch), bar, or kPa (kilopascals), depending on the application and region. The scale allows the user to directly read the gauge pressure value.

It's important to note that the pressure gauge measures the difference between the pressure being measured and the atmospheric pressure. If the system or container is under vacuum (pressure lower than atmospheric pressure), the gauge will indicate negative values.

Pressure gauges are widely used in various industries and applications where monitoring and control of pressure is essential, such as in industrial processes, HVAC systems, pneumatic systems, and hydraulic systems.

Learn more about hydraulic pressure here:

brainly.com/question/857286

#SPJ11