A 2.5l sample of gas is at stp. when the temperature is raised to 373 and the pressure remains constant what will the new volume of the gas be?

The percent yield of Ca₃(PO₄)2 is 100.6%. This means that the actual yield is slightly higher than the theoretical yield, which could be due to experimental error or incomplete reaction.

To calculate the theoretical yield of Ca₃(PO₄)2, we need to determine the limiting reagent in the reaction. We can do this by calculating the amount of Ca₃(PO₄)2 that can be produced from each reactant, using stoichiometry and the molar masses of the compounds.

The balanced chemical equation for the reaction is:

3 CaCl₂ + 2 Na₃PO₄ → Ca₃(PO₄)2 + 6 NaCl

The molar mass of CaCl₂ is 110.98 g/mol, and the molar mass of Ca₃(PO₄)2 is 310.18 g/mol.

First, we convert the mass of CaCl₂ to moles:

0.515 g CaCl₂ / 110.98 g/mol = 0.00464 mol CaCl₂

Next, we use stoichiometry to calculate the moles of Ca₃(PO₄)2 that can be produced from the CaCl₂:

0.00464 mol CaCl₂ × (1 mol Ca₃(PO₄)2 / 3 mol CaCl₂) = 0.00155 mol Ca₃(PO₄)2

Finally, we convert the moles of Ca₃(PO₄)2 to grams:

0.00155 mol Ca₃(PO₄)2 × 310.18 g/mol = 0.481 g Ca₃(PO₄)2 (theoretical yield)

Therefore, the theoretical yield of Ca₃(PO₄)2 is 0.481 g.

To calculate the percent yield, we use the formula:

percent yield = (actual yield / theoretical yield) × 100%

The actual yield is given as 0.484 g. Plugging in the values, we get:

percent yield = (0.484 g / 0.481 g) × 100% = 100.6%

to know more about limiting reagent refer here:

https://brainly.com/question/11848702#

#SPJ11

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To determine which fertilizer, ammonium sulfate or ammonium phosphate, would yield the largest amount of corn for ethanol production, you need to consider the nitrogen content in each fertilizer.

Ammonium sulfate has the chemical formula (NH4)2SO4. It contains 2 nitrogen atoms (N), 8 hydrogen atoms (H), 1 sulfur atom (S), and 4 oxygen atoms (O). The molar mass of nitrogen is 14 g/mol, so the nitrogen content in ammonium sulfate is:
2(N) = 2(14 g/mol) = 28 g/mol.

The molar mass of ammonium sulfate is 132.14 g/mol. To calculate the percent of nitrogen in ammonium sulfate, divide the nitrogen mass by the total molar mass and multiply by 100:
(28 g/mol) / (132.14 g/mol) × 100 = 21.2%.

Ammonium phosphate has the chemical formula (NH4)3PO4. It contains 3 nitrogen atoms, 12 hydrogen atoms, 1 phosphorus atom, and 4 oxygen atoms. The nitrogen content in ammonium phosphate is:
3(N) = 3(14 g/mol) = 42 g/mol.

The molar mass of ammonium phosphate is 149.09 g/mol. To calculate the percent of nitrogen in ammonium phosphate, divide the nitrogen mass by the total molar mass and multiply by 100:
(42 g/mol) / (149.09 g/mol) × 100 = 28.2%.

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To know more about ethanol production refer here: https://brainly.com/question/31574140#

#SPJ11

The pH of a 0.25 molar HBz (benzoic acid) solution is approximately 2.61.

To calculate the pH of the solution, follow these steps:

1. Write the dissociation equation for benzoic acid: HBz ⇌ H⁺ + Bz⁻.
2. Set up an ICE table (Initial, Change, Equilibrium) to determine the equilibrium concentrations of the species involved.
3. Write the expression for Ka: Ka = [H⁺][Bz⁻]/[HBz].
4. Substitute the equilibrium concentrations into the Ka expression and solve for x, representing the [H⁺] concentration.
5. Calculate the pH using the formula: pH = -log[H⁺].

Initial concentrations are [HBz] = 0.25 M, [H⁺] = 0 M, and [Bz⁻] = 0 M. The change in concentration is -x for HBz, +x for H⁺, and +x for Bz⁻. Thus, at equilibrium, [HBz] = 0.25 - x, [H⁺] = x, and [Bz⁻] = x. The Ka expression becomes (6.5 × 10⁻⁵) = x²/(0.25 - x). After solving for x, we find x ≈ 0.00256 M. Finally, pH = -log(0.00256) ≈ 2.61.

To know more about ICE table click on below link:

https://brainly.com/question/30395953#

#SPJ11

Extraction is a useful technique for separating and purifying mixtures of compounds based on differences in their physical properties and reaction types.

The physical property used in extraction is the solubility of a compound in a particular solvent. If a compound is more soluble in one solvent than another, it can be selectively extracted and separated from the mixture.

For example, if a mixture contains both water-soluble and oil-soluble compounds, the mixture can be extracted with water to separate the water-soluble compounds, and then extracted with an organic solvent to separate the oil-soluble compounds.

The reaction type used in extraction is often acid-base chemistry. If a mixture contains both acidic and basic compounds, they can be selectively extracted by adjusting the pH of the solvent.

For example, if a mixture contains both an acidic carboxylic acid and a basic amine, the mixture can be extracted with a basic solvent to selectively extract the amine, and then extracted with an acidic solvent to selectively extract the carboxylic acid.

Overall, extraction is a powerful technique for separating and purifying mixtures of compounds, and its effectiveness depends on the physical properties and reaction types of the compounds in the mixture.

To know more about Extraction refer to-

https://brainly.com/question/16848369

#SPJ11

A forensic investigator relies on rigor mortis and livor mortis to determine the time of death, which respectively refers to the body stiffening and going through predictable stages and bluish-purple blotches appearing due to gravity causing the blood to flow downward after death.

A forensic investigator relies on two primary clues from a corpse to determine the time of death: rigor mortis and livor mortis. Rigor mortis refers to the process where the body stiffens after death, going through predictable stages that typically begin around two hours post-mortem. This occurs due to the lack of ATP in muscles, causing them to contract and become rigid. The stiffness progresses and peaks around 12 hours after death, then gradually subsides within the next 24-48 hours.

Livor mortis, on the other hand, is caused by gravity influencing the blood flow in the body after death. As the blood stops circulating, it flows downward and accumulates in the dependent areas, resulting in bluish-purple blotches appearing on the skin due to the lack of oxygen. This process usually starts around 30 minutes to 2 hours after death and becomes more pronounced within 6-12 hours.

By observing the extent and progression of rigor mortis and livor mortis, a forensic investigator can estimate the time of death, aiding in the investigation process.

Know more about rigor mortis here:

https://brainly.com/question/29194734

#SPJ11

To calculate the specific heat capacity of cadmium, we can use the formula:

Q = mcΔT, Where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. Since the heat gained by the water equals the heat lost by the cadmium, we can set up the following equation:
mc_cadmium (Tfinal - Tinitial_cadmium) = mc_water (Tfinal - Tinitial_water).

Given:
m_cadmium = 65.6 g
Tinitial_cadmium = 100.0°C
m_water = 25.0 g
Tinitial_water = 23.0°C
Tfinal = 32.7°C
c_water = 4.18 J/g°C (specific heat capacity of water)

Now we can solve for c_cadmium:

65.6 * c_cadmium * (32.7 - 100.0) = 25.0 * 4.18 * (32.7 - 23.0)

Solving for c_cadmium:

c_cadmium = (25.0 * 4.18 * (32.7 - 23.0)) / (65.6 * (32.7 - 100.0))
c_cadmium ≈ 0.227 J/g°C

So the specific heat capacity of cadmium is approximately 0.227 J/g°C.

For more questions on: heat

https://brainly.com/question/30738335

#SPJ11

1. Moles of CO₂ is 0.8047.

2. Moles of C is 1.6094.

3. C:H ratio is 1:3.

4. The Emperial formula is c6H6.

5. Emperical formula mass is 78g/mol.

1. Moles of CO₂ = 24.41 g / 44.01 g/mol = 0.5548 mol; Moles of H₂O = 14.49 g / 18.02 g/mol = 0.8047 mol

2. Moles of C = 0.5548 mol (1 C atom in CO₂); Moles of H = 0.8047 mol * 2 (2 H atoms in H₂O) = 1.6094 mol

3. C:H ratio = 0.5548:1.6094 ≈ 1:3 (divide by smallest value), but 1:2.89 is closer, which gives a ratio of 6:6 (multiply by 3 to get whole numbers)

4. Empirical formula: C₆H₆

5. Empirical formula mass: (6 * 12.01) + (6 * 1.01) = 78 g/mol. Molecular formula: (246 g/mol) / (78 g/mol) = 3; C₆H₆ * 3 = C₁₂H₁₂ (molecular formula)

To know more about Molecular formula click on below link:

https://brainly.com/question/14425592#

#SPJ11

The reaction is combustion reaction of hydrocarbon.

Combustion reaction of hydrocarbons is a chemical reaction in which a hydrocarbons reacts with oxygen in the air to produce carbon dioxide (CO₂) and water (H₂O).

The general equation for the combustion of a hydrocarbon is:

hydrocarbon + oxygen → carbon dioxide + water + heat energy

The given reaction;

2C₈H₁₈ + 25O₂ -------> 16CO₂ + 18H₂O

So this reaction corresponds to combustion reaction.

Learn more about combustions here: https://brainly.com/question/13251946

#SPJ1

In order to respond to this query, it is necessary to first define a saturated solution. When a solution reaches its maximal solubility, no more solute can dissolve in the solvent, creating a saturated solution.

Potassium iodide is the solute in this scenario, while water is the solvent. Potassium iodide is most soluble in water at a temperature of around 74.2 grammes per 100 grammes of water.

We must thus add 19.2 additional grammes of KI to the solution in order to make it saturated. This implies that there would be 74.2 grammes of KI in the entire solution.

Learn more about KI   at:

https://brainly.com/question/30033275

#SPJ1

The initial volume is 15.36 L when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To find the initial volume in liters when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L. We will assume constant temperature and number of moles.

Step 1: Convert the initial pressure to atm.
1 atm = 101.325 kPₐ, so:
(101.3 kPₐ) × (1 atm / 101.325 kPₐ) = 1.000 atm (approximately)

Step 2: Apply Boyle's Law, which states that P₁×V₁ = P₂×V₂ when temperature and moles are constant.
P₁ = 1.000 atm
P₂ = 1.92 atm
V₂ = 8.0 L

Step 3: Solve for the initial volume, V₁.
1.000 atm × V₁ = 1.92 atm × 8.0 L
V₁ = (1.92 atm * 8.0 L) / 1.000 atm
V₁ = 15.36 L

The initial volume is 15.36 L when the pressure changes from 101.3kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

The amount of energy required to boil water depends on the initial temperature of the water, the mass of the water, and the heat of vaporization of water.

The heat of vaporization of water is 40.7 kJ/mol or 2.26 kJ/g.

To completely boil 500g of water that is at 15°C, we need to first heat the water to its boiling point (100°C), and then provide the energy required for the phase change from liquid to gas.

The amount of energy required to heat the water from 15°C to 100°C can be calculated using the specific heat capacity of water, which is 4.184 J/g°C:

Q1 = m * c * ΔT

Q1 = 500g * 4.184 J/g°C * (100°C - 15°C)

Q1 = 191,020 J

The amount of energy required for the phase change from liquid to gas can be calculated as follows:

Q2 = m * Hv

Q2 = 500g * 2.26 kJ/g

Q2 = 1,130 kJ

Therefore, the total amount of energy required to completely boil 500g of water that is at 15°C is:

Qtotal = Q1 + Q2

Qtotal = 191,020 J + 1,130 kJ

Qtotal = 1,321,020 J

So, it would require 1,321,020 joules of energy to completely boil 500g of water that is at 15°C.

To know more about energy refer here

https://brainly.com/question/1932868#

#SPJ11

Two important techniques used in titration that provide accurate results are the use of standardized solutions and the proper use of indicators and ignoring these techniques can lead to inaccurate conclusions, wasted resources, and potentially hazardous outcomes.

The use of standardized solutions is important because it ensures that the concentration of the solution being used is known with a high degree of accuracy. Standardization involves carefully preparing a solution of known concentration and then using it to determine the concentration of another solution.

The proper use of indicators is also crucial in titration because it helps to detect the endpoint of the reaction. Indicators are substances that undergo a color change when the reaction reaches a certain point. The choice of indicator depends on the reaction being studied, and the wrong indicator can result in an inaccurate endpoint determination.

To learn more about titration follow the link:

https://brainly.com/question/31271061

#SPJ4

The complete question is:

There are many aspects to the technique known as titration that are extremely important if results are to be accurate. In traditional or authentic laboratory setting, these techniques are important and sometimes delicate. List two techniques used in this lab that provided you with the most accurate possible results. Describe why these techniques are important and how ignoring the techniques would affect the lab.

Technique #1: Why technique is important?

Technique #2: Why is technique #2 important?

The work done by Henry can be calculated by multiplying the weight of the box (500 N) with the distance it was lifted (0.75 m). Thus, the work done is 375 J (Joules).(D)

In physics, work is defined as the energy transferred when a force is applied to move an object through a distance. The unit of work is Joule, which is the same as Newton-meter. In this question, Henry lifted the box with a force equal to its weight, and the box was lifted through a distance of 0.75 m.

Therefore, Henry did work on the box by transferring 375 J of energy to it. This work is equal to the potential energy gained by the box due to its vertical displacement. The time taken (1.5 seconds) is not relevant to the calculation of work.

To know more about potential energy click on below link:

https://brainly.com/question/24284560#

#SPJ11

The alpha decay of the isotope of the element produces lead-206 is the polonium (Po)- 210.

Alpha decay is the process, the alpha particles is the emitted when the heavier nuclei decays into the lighter nuclei. Then the  alpha particle released has the charge of the +2 units.

The representation of the alpha decay is as :

[tex]X^{A}{z} }[/tex] --->  Y⁴₂  +  α⁴₂

Y⁴₂  = Pb²⁰⁶₈₂

Z - 2 = 82

Z = 84

A - 4 = 206

A = 210

The atomic mass, A = 210

The atomic number, Z = 84

Therefore, the element is the polonium (Po) that has the atomic number is the 84 and the atomic mass is the 210.

To learn more about isotopes here

https://brainly.com/question/787643

#SPJ4

Answer:

Carbon dioxide:

One carbon circle with 2 oxygen circles connected to it.

Ammonia:

One nitrogen circles with 3 hydrogen circles connected to it.

Oxygen:

2 oxygen circles connected to each other.

Hydrogen:

2 hydrogen circles stuck together

There are several definitions of acids and bases, and each definition provides a unique perspective on their properties and behaviors.

Arrhenius Definition:

According to the Arrhenius definition, an acid is a substance that dissociates in water to form hydrogen ions (H+), while a base is a substance that dissociates in water to form hydroxide ions (OH-).

For example, hydrochloric acid (HCl) dissociates in water to form H+ and Cl- ions:

HCl → H+ + Cl-

On the other hand, sodium hydroxide (NaOH) dissociates in water to form Na+ and OH- ions:

NaOH → Na+ + OH-

Characteristics for identification:

Acids typically have a sour taste and can cause a burning sensation on the skin. Bases have a bitter taste and can feel slippery to the touch. They also typically have a higher pH value (greater than 7) in aqueous solutions.

Bronsted-Lowry Definition:

According to the Bronsted-Lowry definition, an acid is a substance that donates a proton (H+) to another molecule or ion, while a base is a substance that accepts a proton (H+) from another molecule or ion.

In this reaction, acetic acid is the acid because it donates a proton, while water is the base because it accepts a proton.

Characteristics for identification:

Acids and bases in the Bronsted-Lowry sense are identified by the presence or absence of a hydrogen ion. An acid must contain a hydrogen ion that can be donated to a base, while a base must have an available lone pair of electrons to accept a hydrogen ion.

Lewis Definition:

According to the Lewis definition, an acid is a substance that accepts a pair of electrons, while a base is a substance that donates a pair of electrons.

In this reaction, boron trifluoride is the acid because it accepts a pair of electrons, while ammonia is the base because it donates a pair of electrons.

Characteristics for identification:

Acids and bases in the Lewis sense are identified by their electron-pair accepting or donating abilities. An acid must be able to accept a pair of electrons, while a base must be able to donate a pair of electrons.

Learn more about acid Visit: brainly.com/question/2927542

#SPJ4

Correct Question:

Explain the different definitions of acid and base. Give an example of each and the characteristics of your identification.

Polonium is a rare and radioactive element that belongs to the group of chalcogens. The coordination number of polonium in a simple cubic lattice is 8.

It is known to crystallize in the simple cubic lattice structure, which is one of the three basic types of crystal lattice structures. In this structure, each polonium atom is located at the corner of a cube, sharing its electrons equally with its neighboring atoms.

The coordination number of an atom in a crystal lattice is the number of nearest neighbor atoms to which it is bonded. In the case of polonium, since each atom is located at the corner of a cube, it is in contact with eight other atoms, which are located at the corners of the adjacent cubes.

The knowledge of the crystal structure and coordination number of polonium is important for understanding its physical and chemical properties, and can also have implications in the fields of materials science, nuclear physics, and medical applications.

To know more about Polonium refer to-

https://brainly.com/question/555482

#SPJ11

Answer: C

Explanation: When distinguishing between opinion and fact, it's important to pick out certain words or phrases.

EX 1: Apple's are healthy, but you shouldn't eat too many of them. Fact

EX 2: I don't think you should eat that banana, they don't taste good to me. Opinion

Try to say the sentence in your head as if you were talking to another person, and try to determine your answer that way.

An unmanned spacecraft is a type of spacecraft that is designed and programmed to operate without human crew on board.

These spacecraft are sent from Earth to explore various objects in space, such as planets, moons, asteroids, comets, and other celestial bodies. They are used to gather scientific data, images, and other important information that can help us learn more about the universe.

The unmanned spacecraft is equipped with a variety of instruments and sensors that allow it to study the object it is exploring. These instruments can include cameras, spectrometers, radar systems, and other scientific instruments. The spacecraft is controlled remotely from Earth, and the data it collects is transmitted back to Earth for analysis.

One of the main advantages of using unmanned spacecraft is that they can operate in environments that are too dangerous or inhospitable for humans. For example, unmanned spacecraft can explore the harsh and extreme environments of other planets or moons, where humans cannot survive.

Additionally, unmanned spacecraft are often less expensive to launch and operate than crewed missions, making them a more cost-effective option for space exploration.

In summary, unmanned spacecraft are an essential tool for exploring the vast expanse of space. They allow us to gather important data and information about our universe, and they are a key component of modern space exploration.

To know more about spacecraft, visit:

https://brainly.com/question/13478702#

#SPJ11

When calcium metal reacts with chlorine gas, they form an ionic compound known as calcium chloride. The chemical formula for calcium chloride is [tex]CaCl2[/tex].

During the reaction, calcium metal loses two electrons to form [tex]Ca2+[/tex] ions while chlorine gas accepts these electrons to form [tex]Cl-[/tex] ions.

The electrostatic attraction between the positively charged [tex]Ca2+[/tex] ions and negatively charged [tex]Cl-[/tex] ions results in the formation of the solid ionic compound, calcium chloride.

Calcium chloride is a white crystalline solid that is highly soluble in water. It has a wide range of applications in industries such as food, pharmaceuticals, and de-icing of roads.

Additionally, it is used as a drying agent in laboratory procedures and as a source of calcium ions in biological and medical applications.

To know more about calcium chloride refer to-

https://brainly.com/question/664620

#SPJ11

To solve this problem, we can use the following equation:

Moles of acid = Moles of base

where "acid" refers to the HCl and "base" refers to the NaOH.

First, let's calculate the moles of HCl:

moles of HCl = concentration of HCl × volume of HCl

            = 0.152 mol/L × 0.0223 L

            = 0.0033856 mol

Next, let's calculate the volume of NaOH required to neutralize the HCl:

moles of NaOH = moles of HCl

volume of NaOH = moles of NaOH / concentration of NaOH

We know the concentration of NaOH (0.200 M), so let's substitute in the values:

moles of NaOH = 0.0033856 mol

volume of NaOH = 0.0033856 mol / 0.200 mol/L

              = 0.016928 L

              = 16.928 mL (rounded to three decimal places)

Therefore, 16.928 mL of 0.200 M NaOH is required to neutralize 22.3 mL of 0.152 M HCl.

To know more about problem refer here

https://brainly.com/question/31611375#

#SPJ11

E. None of these compounds should be soluble in pentane. Pentane is a nonpolar solvent, meaning it will dissolve other nonpolar molecules, but not polar or ionic molecules.

Acetic acid is polar, while pentanol and ethyl methyl ketone have polar functional groups. Benzene is nonpolar, but larger than pentane, so it is unlikely to dissolve well in it.

Acetic acid is a colorless liquid organic compound with the chemical formula CH3COOH. It is also known as ethanoic acid and is a weak acid. It is a pungent-smelling liquid that is commonly used as a solvent, as a food preservative, and in the manufacture of various chemicals. Acetic acid is the main component of vinegar, and it is also used as a reagent in laboratory experiments. In the body, acetic acid is produced during the metabolism of carbohydrates and fats.

Visit here to learn more about pentane brainly.com/question/1550379

#SPJ11

When the force of tectonic plates pushing against each other become too strong the plates break and create faults.

Tectonic plates are large, rigid pieces of the Earth's lithosphere that move relative to one another. The lithosphere is the rocky outer layer of the Earth that includes the crust and part of the upper mantle. Tectonic plates can vary in size from a few hundred to thousands of kilometers in diameter. They interact at their boundaries and are responsible for the formation and destruction of the Earth's surface features, such as mountains and ocean trenches. Movement of the plates helps explain the occurrence of earthquakes, volcanic eruptions, mountain building, and oceanic trench formation. In plate tectonics, the lithosphere is divided into seven major plates and several minor ones. The major plates include the African, Antarctic, Eurasian, Indo-Australian, North American, Pacific, and South American plates. The plates move at a rate of several centimeters per year in response to convection currents in the mantle.

When the force of tectonic plates pushing against each other become too strong the plates break and create faults. This can cause folding of the crust to create mountains or reverse faults can create deep valleys. Volcanoes are also involved in the formation of landforms as they create mountains, ridges and canals. Earthquakes can also cause landforms to form in areas that were previously flat.

To learn more about tectonic plates

https://brainly.com/question/2325633

#SPJ4

The number of moles in a cylinder of Krypton can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature divided by the gas constant should be equal to the number of moles of gas in the container.

Using the given values, we find that the number of moles in the cylinder is 1.61 moles. To calculate this, first convert the temperature to Kelvin (K) by adding 273.15 to the temperature in Celsius, giving us 385.95 K.

Then, the ideal gas law equation becomes (22.8 atm * 17 L) / (8.314 J/K*mol * 385.95 K) = 1.61 moles. Thus, the cylinder contains 1.61 moles of Ar.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

We need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

To solve this problem, we need to use the balanced chemical equation for the reaction between hydrogen gas (H₂) and bromine (Br₂):

[tex]H_2 + Br_2 - > 2HBr[/tex]

According to the stoichiometry of this equation, one mole of Br₂ reacts with one mole of H₂ to produce two moles of HBr. Therefore, we need to determine the number of moles of Br₂ in 9.0 g, and then use the mole ratio to find the number of moles of H₂ required.

Finally, we can convert the number of moles of H₂ to liters using the ideal gas law.

First, we need to calculate the number of moles of Br₂ in 9.0 g:

The molar mass of Br₂ is 2(79.90 g/mol) = 159.80 g/mol

The number of moles of Br₂ in 9.0 g is:

9.0 g / 159.80 g/mol = 0.0563 mol Br₂

Next, we use the mole ratio from the balanced equation to find the number of moles of H₂ required:

According to the balanced equation, one mole of Br₂ reacts with one mole of H₂, so we need 0.0563 moles of H₂.

Finally, we can use the ideal gas law to convert the number of moles of H₂ to liters:

The ideal gas law is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

We can assume standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm.

At STP, one mole of an ideal gas occupies 22.4 L.

Therefore, the volume of H2 required is:

V = (0.0563 mol) x (22.4 L/mol) = 1.26 L

Therefore, we need 1.26 liters of hydrogen gas to react with 9.0 g of bromine.

learn more about temperature here

https://brainly.com/question/26866637

#SPJ1

The cell potential for the given unbalanced reaction is 2.334 V.

To calculate the cell potential, we first need to balance the reaction:
Mg(s) + 2Fe³⁺(aq) → Mg²⁺(aq) + 2Fe(s)

Next, we find the difference in standard reduction potentials:
E°(Mg²⁺/Mg) = -2.37 V
E°(Fe³⁺/Fe) = -0.036 V
E°cell = E°(Mg²⁺/Mg) - E°(Fe³⁺/Fe) = -2.37 - (-0.036) = -2.334 V

Now, we apply the Nernst equation to account for non-standard conditions:
E = E° - (RT/nF)ln(Q)
where R = 8.314 J/mol·K, T = 298 K, n = 2 moles of electrons, F = 96485 C/mol, and Q is the reaction quotient.

Q = [Mg²⁺]/[Fe³⁺]² = (0.000612)/(1.29)²

E = -2.334 - (8.314 * 298)/(2 * 96485) * ln(0.000612/1.29²)
E ≈ 2.334 V

Thus, the cell potential for the given reaction is 2.334 V.

To know more about Nernst equation click on below link:

https://brainly.com/question/31593791#

#SPJ11

(a) Osmolarity of 0.069 m na2co3 is 0.138 m, (b) osmolarity of 0.62 m ai(no3)3 is 1.86 m, (c) osmolarity of a 0.30 m glucose (c6h1206) aqueous solution is 0.30 m.

Osmolarity is a measure of the concentration of solutes in a solution. It is expressed as the number of osmoles (molecules or particles) of solutes per litre of solution. Osmolarity is an important factor in the body's ability to regulate the balance of water and electrolytes in the blood and other bodily fluids. It is also important for the absorption of nutrients from the intestines, and the maintenance of blood pressure. Osmolarity is measured using a special instrument called an osmometer.

To learn more about Osmolarity

https://brainly.com/question/14814464

#SPJ4

The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.

To find the difference in pressure between ideal and non-ideal conditions for CO₂ using the van der Waals equation, follow these steps:

1. First, recall the van der Waals equation: (P + a(n/V)²)(V - nb) = nRT, where P is pressure, n is the number of moles, V is volume, T is temperature, a and b are van der Waals constants, and R is the ideal gas constant (0.0821 L･atm/mol･K).

2. Given values: n = 2.0 mol, V = 7.30 L, T = 200.0 K, a = 3.59 L²･atm/mol², b = 0.0427 L/mol, and P_vdW = 4.50 atm (non-ideal pressure).

3. Calculate the ideal pressure (P_ideal) using the ideal gas law, PV = nRT:
  P_ideal = nRT/V = (2.0 mol)(0.0821 L･atm/mol･K)(200.0 K) / 7.30 L = 4.49 atm.

4. Find the difference in pressure between ideal and non-ideal conditions:
  ΔP = P_vdW - P_ideal = 4.50 atm - 4.49 atm = 0.01 atm.

The difference in pressure between ideal and non-ideal conditions for CO₂ is 0.01 atm.

To know more about van der Waals equation :

https://brainly.com/question/31585867

#SPJ11

To predict the molecular geometry of these molecules using the VSEPR theory, we first need to draw the Lewis structure for each molecule:

1. HI

Lewis structure: H-I (single bond)

The central atom (Iodine) has 7 valence electrons, and each hydrogen atom contributes 1 valence electron. Therefore, the total valence electrons in the molecule is 9.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 1 = 1

Molecular geometry: linear

2. CBr4

Lewis structure:

:Br-C-Br:

: | :

:Br-C-Br:

The central atom (Carbon) has 4 valence electrons, and each Bromine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 32.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 4 = 4

Molecular geometry: tetrahedral

3. CH2Cl2

Lewis structure:

H : Cl

| :

H-C-H

| :

Cl:

The central atom (Carbon) has 4 valence electrons, each hydrogen atom contributes 1 valence electron, and each chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 2 + 4 = 6

Molecular geometry: octahedral

However, the two lone pairs of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

4. SF2

Lewis structure:

F : S : F

\ /

F

The central atom (Sulfur) has 6 valence electrons, each Fluorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 20.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 1 + 2 = 3

Molecular geometry: trigonal planar

However, the lone pair of electrons on the central atom will repel the bonded pairs more than the bonded pairs will repel each other. Therefore, the shape will be bent or V-shaped.

5. PCl3

Lewis structure:

Cl : P : Cl

:

Cl

The central atom (Phosphorus) has 5 valence electrons, each Chlorine atom contributes 7 valence electrons. Therefore, the total valence electrons in the molecule is 26.

Steric number = number of lone pairs of electrons + number of atoms bonded to central atom = 0 + 3 = 3

Molecular geometry: trigonal planar

To know more about VSEPR theory refer to-

https://brainly.com/question/14992767

#SPJ11