a 35.8 l cylinder of ar (g) is connected to an evacuated 1875 l tank so that the gas now is spread over both vessels. if the temperature is held constant and the final pressure is 721 mmhg, what must have been the original gas pressure in the cylinder, in atmospheres?

Answer:

B. economics

Explanation:

An understanding of economic principles can help a 911 operator understand the root causes of many different emergencies, such as poverty, drug abuse, and domestic violence, and help them be more effective at dispatching resources to help those in need. Furthermore, a basic understanding of economics can provide context for some types of emergencies, such as natural disasters or workplace accidents related to unsafe working conditions. However, while having an understanding of economics is helpful, it's not mandatory for 911 operators to perform their jobs effectively. They ultimately need to be skilled in communication, risk assessment, and decision-making to ensure that people receive the assistance and resources they need in an emergency situation.

The resistivity of both the wires is same. The resistance of the second wire to the first is 1:2.

The resistivity of a material is a property that depends only on the material itself, and it is not affected by the dimensions or shape of the object made from that material. In this case, since both wires are made of copper, their resistivity will be the same.

However, you may be looking for the ratio of the resistance of the two wires, which does depend on their dimensions. The resistance of a wire can be calculated using the formula:

R = ρ * [tex]\frac{L}{A}[/tex]
where R is the resistance, ρ is the resistivity, L is the length, and A is the cross-sectional area of the wire.

For the first wire, we have:

R1 = ρ * [tex]\frac{L}{A}[/tex]

For the second wire, we have:

R2 = ρ * [tex]\frac{2L}{4A}[/tex]

Now, let's find the ratio of the resistances R2 to R1:

[tex]\frac{R2}{R1}[/tex] = (ρ * [tex]\frac{2L}{4A}[/tex]) / (ρ * [tex]\frac{L}{A}[/tex])

The resistivity, ρ, cancels out since it is the same for both wires:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2L}{4A}[/tex] ÷ [tex]\frac{L}{A}[/tex]

Now we can simplify the expression:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2L}{4A}[/tex] * [tex]\frac{A}{L}[/tex]

The L and A cancel out:

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{2}{4}[/tex]

[tex]\frac{R2}{R1}[/tex] = [tex]\frac{1}{2}[/tex]

So the ratio of the resistance of the second wire to the resistance of the first wire is 1:2. Note that this is the ratio of the resistances, not the resistivities, which are the same for both wires.

Know more about resistivity here:

https://brainly.com/question/30799966

#SPJ11

To maximize its rotational inertia, a flywheel must be constructed in a way that "most of the mass is concentrated far from the axis."

Rotational inertia is the measure of a rotating object's resistance to change in its state of rotation. It is affected by the distribution of mass of the object, specifically the distance of the mass from the axis of rotation.

A flywheel is a mechanical device used to store rotational energy. To maximize the flywheel's rotational inertia, the mass of the flywheel should be concentrated as far away from the axis of rotation as possible. This is because the farther the mass is from the axis, the greater its effect on the flywheel's rotational inertia. Therefore, the correct answer to the question is "most of the mass is concentrated far from the axis."

A flywheel is constructed to maximize its rotational inertia by concentrating most of the mass far from the axis. This distribution of mass increases the flywheel's resistance to changes in rotational speed, enhancing its ability to store and release energy efficiently.

Learn more about Rotational inertia here: https://brainly.com/question/29652198

#SPJ11

Foundation: Use a deep and sturdy foundation that extends below the frost line and is anchored to bedrock. Consider foundations or caissons, which can better withstand lateral forces during an earthquake.

Structural System: Utilize a seismic-resistant structural system such as reinforced concrete or steel framing with appropriate bracing and cross-bracing configurations. Consider incorporating a moment-resisting frame or a shear wall system, which can provide enhanced lateral stability during seismic events.

Dampers and Isolators: Include seismic dampers or isolators in the structural system to absorb or dissipate seismic energy. These can be installed at various locations, such as between floors or in the foundation, to reduce the impact of seismic forces on the building.

Diaphragms: Strengthen diaphragms, which are horizontal structural elements such as floors and roofs, to improve their resistance to lateral loads during an earthquake. Consider using diaphragms made of materials such as cross-laminated timber (CLT) or steel decking, which can provide additional stiffness and strength.

Learn more about earthquake here

https://brainly.com/question/29500066

#SPJ4

The required rotational inertia about the left end of the rod is calculated to be 3ML²/2.

A body's inertia is a property that makes it resist efforts to set it in motion or, if it is already moving, to change the speed or direction of it.

The inertia of a substance is a passive quality that only enables it to withstand active agents like forces and torques. To determine the left's spinning inertia,

I = I₁ + I₂ + I₃ = 3 M(0)² + 2M(L/2)² + M(L)² = 3ML²/2

Thus, the required rotational inertia about the left end of the rod is calculated to be 3ML²/2.

To know more about inertia:

https://brainly.com/question/18113232

#SPJ4

Consider the given circuit shown below. What is the energy (in J) stored in each capacitor after the switch has been closed for a very long time. The given circuit is shown below.

The energy stored in each capacitor is given as follows:C1 = (1/2) * (Q1/C1)^2C2 = (1/2) * (Q2/C2)^2Initially, the capacitors are uncharged when the switch S is open. When the switch S is closed for a very long time, it is equivalent to that capacitors have been connected in parallel. So the equivalent capacitance of the parallel combination is given as:C = C1 + C2 = 4 μF + 4 μF = 8 μFThe potential difference across each capacitor is 12 V as the battery is ideal. Therefore, the charge stored in each capacitor is given by:Q = CVCharge stored in the equivalent capacitor,Q = CeqV = 8 μF × 12 V = 96 μCAs the charge stored in each capacitor is the same, the energy stored in each capacitor is the same.Now the energy stored in each capacitor is given by:C1 = (1/2) * (Q/C1)^2 = (1/2) * (48 x 10^-6 / 4 x 10^-6)^2 = 1.152 J.C2 = (1/2) * (Q/C2)^2 = (1/2) * (48 x 10^-6 / 4 x 10^-6)^2 = 1.152 J.Therefore, the energy stored in each capacitor after the switch has been closed for a very long time is 1.152 J.What is the capacitor?A capacitor is a device that stores electrical energy in an electric field by collecting electrons on one plate and donating electrons from the other plate. The plates are separated by a dielectric, which is an insulating material. Capacitors are used in a variety of applications, including power conditioning, signal processing, and radio tuning.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ4

Answer:t = 1.27 s

Explanation:

Given

Initial velocity(vi)=4.30m/s

final velocity(vf)=0

F = 44.0 N

M=57.5/9.8(considering g=9.8)

vf = vi + (Fnet / m) * t

t = (m * (vf - vi)) / Fnet

Substituting the given values, we get:

t = (57.5 N / 9.81 m/s^2) * (0 - 4.30 m/s) / (-44.0 N)

t = 1.27 s

A force of 44.0 N must be applied to the bowling ball for 6.98 seconds to stop it.

To determine how long a force of 44.0 N must be applied to a 57.5 N bowling ball moving at an initial velocity of 4.30 m/s to stop it, we can use the formula for the final velocity of an object subjected to a constant force:

final velocity = initial velocity + (force/mass) x time

Since we want to stop the ball, final velocity is 0. We can rearrange  formula to solve for time:

time = (mass x (final velocity - initial velocity))/force

Substituting in given values, we get:

time = (57.5 kg x (0 m/s - 4.30 m/s))/44.0 N = 6.98 seconds

To know more about initial velocity, here

brainly.com/question/9365999

#SPJ4

CMBR is considered evidence for the Big Bang because its temperature and structure are consistent with the theory's predictions.

The cosmic microwave background radiation (CMBR) is viewed as one of the most grounded bits of proof on the side of the Theory of how things came to be. As per this hypothesis, the universe started as a peculiarity and afterward quickly extended, in the long run chilling off and framing matter as far as we might be concerned today. As the universe extended and cooled, it abandoned a radiation field that is noticeable today as the CMBR. The perception of CMBR gives significant bits of knowledge into the early universe, permitting us to concentrate on its temperature and construction. The CMBR is seen to have an almost uniform temperature this way and that, reliable with the Theory of how things came to be's expectation of a homogeneous and isotropic universe. Also, the CMBR shows variances in temperature, which are remembered to have emerged from quantum vacillations in the early universe. Together, these perceptions give solid proof to the Theory of how things came to be's legitimacy.

To learn more about big bang theory, refer:

https://brainly.com/question/30832607

#SPJ4

If you could count stars at a rate of about one per second, it would take several thousand years to count all the stars in the Milky Way galaxy.

The Milky Way galaxy contains approximately 100 billion to 400 billion stars. In order to estimate the time it would take to count all the stars, let's assume the average number of stars, which is around 250 billion.


1. First, determine the number of seconds in a minute: 60 seconds
2. Next, determine the number of seconds in an hour: 60 minutes * 60 seconds = 3,600 seconds
3. Determine the number of seconds in a day: 24 hours * 3,600 seconds = 86,400 seconds
4. Determine the number of seconds in a year: 365 days * 86,400 seconds = 31,536,000 seconds

Now, divide the total number of stars (250 billion) by the number of seconds in a year:
250,000,000,000 stars / 31,536,000 seconds per year ≈ 7,926 years

So, it would take approximately 7,926 years to count all the stars in the Milky Way galaxy at a rate of one star per second. Therefore, the correct answer from the group of choices is several thousand years.

Know more about Milky Way galaxy here:

https://brainly.com/question/2905713

#SPJ11

The main reason for the difference in precipitation in the two locations is due to the difference in temperature. When temperatures are cold enough, the water vapor in the air will condense and form snowflakes.

The temperature in Ohio is likely not cold enough for snow, but the temperature in Pennsylvania is cold enough for the water vapor in the air to turn into snowflakes. The temperature in a given area is determined by a variety of factors, such as air pressure, humidity, and wind speed. Each of these factors can be different in each location, which can lead to a difference in temperature and, ultimately, a difference in precipitation.

Air pressure is the pressure of the atmosphere at a particular location as the higher the air pressure, the warmer the temperature. The humidity determines the amount of water vapor in the air and as the higher the humidity, the more water vapor is in the air and the more likely it is to condense into snow. Wind speed is the speed of the wind at a particular location also the faster the wind, the colder the temperature.

To learn more about temperature click here https://brainly.com/question/24283056

#SPJ1

A protostar with a mass too small to sustain nuclear fusion is known as a brown dwarf.

Brown dwarfs, sometimes referred to as failed stars, are substellar objects that lack the mass to sustain hydrogen fusion in their cores, the process which powers stars. Instead, they are sustained by the gravitational contraction of deuterium and lithium fusion.

These objects are much cooler than stars, emitting most of their light in the infrared range and having temperatures of only up to a few thousand kelvins. Brown dwarfs have masses ranging from 13 to 75 times that of Jupiter, and are much less luminous than stars. Brown dwarfs are not massive enough to sustain nuclear fusion, and thus are not classified as stars.

know more about Protostar here

https://brainly.com/question/28852972#

#SPJ11

Answer:

One mole of O2 contains 6.022 x 10^23 molecules, therefore, 5 moles of O2 contain 3.011 x 10^24 molecules.

Explanation:

The force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails. Option A right choice.

The force of attraction between the magnet and the iron nail is as a result of the magnetic field that surrounds the magnet, the iron nail is then drawn toward the magnet. This force is known as the magnetic force and it can either attract or repel objects that are magnetic.

Magnets have two poles, the North Pole and the South Pole, the magnetic field always flows from the North Pole to the South Pole, and therefore when an iron nail is placed within the magnetic field, the magnetic force pulls it towards the magnet.

The reason the force that the magnet exerts is best described as magnetic is that it is a result of the magnetic field that surrounds the magnet. Magnetic forces do not involve electrons or ions, rather, they involve the movement of the magnetic field around the magnet, which exerts a force on any magnetic object that is placed within the field.

Therefore, the force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails.

So, Option A is right choice.

For similar question on magnetic force

https://brainly.com/question/13277365

#SPJ11

Question:-

the force that is exerted by a magnet as it picks up iron nails could be best described as

A. the magnetic force exerted by ions moving within the magnet on electrons moving within the nails.

B. the electric force exerted by electrons in the magnet, on electrons in the nails.

C. the magnetic force exerted by electrons moving within the magnet, on electrons moving within the nails.

D. the force of attraction between the nuclei of atoms in the magnet and the nuclei of atoms in the nails.

E. the electric force exerted by ions in the magnet on electrons in the nails.

The new image is located at a measure of 7.5 cm from the mirror.

Using the mirror formula, 1/f = 1/do + 1/di, where f is the focal length, do is the object distance and di is the image distance.

Let's first find the focal length of the concave mirror. We can use the mirror formula with the given values of object distance and image distance:

[tex]1/f = 1/do + 1/di\\1/f = 1/0.12 + 1/0.08\\1/f = 8.33 + 12.5\\f = 1/20.83\\f = 0.048 m[/tex]

Now we can use the mirror formula again to find the new image distance when the object distance is 18.0 cm:

[tex]1/f = 1/do + 1/di\\1/0.048 = 1/0.18 + 1/di\\di = 0.048 * 0.18 / (0.18 - 0.048)\\di = 0.009936 / 0.132\\di = 0.075 m[/tex]

Therefore, the new image is located at almost 7.5 cm away from the mirror.

To know more about mirror formula, here

brainly.com/question/8512677

#SPJ4

According to NASA, the perihelion distance of Vesta is approximately 2.15 (AU), or about 200 million miles (320 million kilometers) from the Sun.

The perihelion distance of Vesta is the point in its orbit where it is closest to the Sun. To find this distance, follow these steps:

1. Locate Vesta and the Sun in a solar system map or simulation.

2. Identify the pericenter, which is the point on Vesta's orbit marked with a bar, indicating its closest approach to the Sun.

3. Use the measurement tool to measure the distance between the Sun and Vesta at the pericenter.

The point at which the orbit comes closest to the parent body (the pericenter) is marked with a bar.

to know more about perihelion distance refer here:

https://brainly.com/question/28644653#

#SPJ11

The voltage across the capacitor 11 ms after closing the switch is  11 ms.

To solve this problem, we will use the time constant (τ) of the RC circuit, which is given by the product of the resistance (R) and the capacitance (C):

τ = RC

Since the capacitor is initially uncharged, the voltage across it (Vc) at time t is given by:

Vc = V0(1 - e^(-t/τ))

Where V0 is the voltage of the battery.

At time t = 11 ms, the switch is closed, and the capacitor begins to charge. We are asked to find the voltage across the capacitor at this time.

Since the switch is closed, the resistor is in the circuit, and we need to know its value to calculate the time constant.

However, we are not given the value of the resistor, so we cannot solve the problem with the information given.

We need either the value of the resistor or the time constant to calculate the voltage across the capacitor at 11 ms.

For such more question on voltage:

https://brainly.com/question/1176850

#SPJ11

Using excess energy from a sunny day stored in batteries is the best option for off-the-grid PV solar systems at night.

Based on the information given, the best option for a homeowner using an off-the-grid PV solar system to power a home between 9:00 pm and 6:00 am would be to use excess energy from a sunny day stored in batteries for power. This means that the solar panels would generate excess energy during the day which would be stored in batteries to be used at night. This is common practice in off-the-grid solar systems and is an effective way to ensure consistent power supply. Switching to the electrical grid or relying on other sources of energy like wind or hydroelectricity would not be feasible for an off-the-grid solar system. Burning wood for heat and light could be an option but it would not be directly related to the solar system.

Learn more about  pv solar here:

https://brainly.com/question/29548184

#SPJ4

The center of mass for this star-planet system would be located approximately 0.021 AU from the center of the star.

To find the center of mass of the star-planet system, we will use the following formula:

Center of mass = (m1 * r1 + m2 * r2) / (m1 + m2)

Here, m1 and r1 are the mass and distance of the star from the reference point (center of mass), and m2 and r2 are the mass and distance of the planet.

The mass of the star (our Sun) is 1 solar mass, and the mass of the planet is 6 times the mass of Jupiter, which is about 0.018 solar masses. The distance from the star to the planet is the same as the distance from Jupiter to our Sun, which is 5.2 AU.

Using the formula:

Center of mass = (1 * r1 + 0.018 * 5.2) / (1 + 0.018)

Solving for r1, we get:

r1 ≈ 0.021 AU

So, the center of mass is approximately 0.021 AU from the center of the star.

To know more about center of mass click on below link:

https://brainly.com/question/29576405#

#SPJ11

Answer:

Explanation:

So this question is basically asking you to find where 20= -16t^2+100t+5 because you want to find the time for how long after the arrow was launched does it hit the intended target of 20 feet. Using a graphing calculator you put -16t^2+100t+5 into y1 and 20 into y2. Once you do that you can find the intersection point and the x coordinate is your answer because the x value represents the time. So the answer is 6.096 seconds. If you need an exact answer then you need to use the quadratic formula and you would get (25+the square root of 565)/ 8

After the arrow passes its maximum height, it comes down and hits a target that was placed feet above the ground. Long after the arrow was shot, it hit its intended target it will take about 5.2 seconds for it to hit its intended target.

We can use the equation given below to calculate the height of an arrow in feet t seconds after it has been fired. This equation is a quadratic equation.

h(t) = -16t² + 48t + 100The maximum height that the arrow reaches can be determined by using the vertex formula.

The vertex formula for a quadratic equation is given below. t = -b / 2a.

After calculating the value of t, we can find the height of the arrow at this time. After this, we can set up another equation to find out how long it takes for the arrow to hit its intended target. This equation will be given as follows.100 - h(t) = -16t² + 48t + 9.4. By solving this equation, we can get the value of t. It is approximately 5.2 seconds. Therefore, the arrow will hit its intended target about 5.2 seconds after it has been fired.

Learn more about quadratic equation at:

https://brainly.com/question/30098550

#SPJ11

When you stand a meterstick on its end and let it rotate to the floor, the time it takes to fall is dependent on the moment of inertia.

If you attach a heavy glob of clay to its upper end and repeat the experiment, the time it takes to fall will be longer. The moment of inertia is defined as the resistance of an object to rotational motion. It is dependent on the shape and mass distribution of an object. The clay's addition to the meterstick's upper end changes the mass distribution of the object and increases its moment of inertia. As a result, the object will take longer to fall because it has more resistance to rotational motion.

In summary, the time it takes for a meterstick to fall is dependent on its moment of inertia. Adding a heavy glob of clay to its upper end increases the moment of inertia, resulting in a longer time for it to fall.

Know more about moment of inertia. here:

https://brainly.com/question/14460640

#SPJ11

Answer:

Approximately 1.95 x 10^20 helium molecules

Explanation:

A picometer is a unit of length equal to one trillionth of a meter, or 10^-12 meters. To find out how many helium molecules could fit between Earth and Mars, we need to first calculate the distance between them in picometers:

54.6 million kilometers = 54.6 x 10^9 meters

54.6 x 10^9 meters = 54.6 x 10^21 picometers (since there are 10^12 picometers in a meter)

Next, we need to calculate how many helium molecules can fit in this distance. We can do this by dividing the distance between Earth and Mars by the length of a helium molecule:

54.6 x 10^21 picometers / 280 picometers per helium molecule

= 1.95 x 10^20 helium molecules

Therefore, approximately 1.95 x 10^20 helium molecules could fit between Earth and Mars, assuming they were lined up end to end without any space between them.

We have 100.0 kg of skim milk at 0% fat and 2.5% protein. approximately 298.48 kg of milk A and 200.05 kg of whole milk B should be added to the skim milk to get the desired final mixture.

Let x kg of milk with 2.0% fat and 2.1% protein (Milk A) be added to the skim milk. Let y kg of whole milk with 3.5% fat and 1.9% protein (Milk B) be added. We need to find x and y for the final mixture.
1. Fat content equation:
(0.00 * 100) + (0.02 * x) + (0.035 * y) = 0.016 * (100 + x + y)
2. Protein content equation:
(0.025 * 100) + (0.021 * x) + (0.019 * y) = 0.022 * (100 + x + y)
Step 1: Solve the fat content equation for y:
0.02 * x + 0.035 * y = 1.6 + 0.016 * x + 0.016 * y
0.019 * x + 0.02 * y = 1.6
y = (1.6 - 0.019 * x) / 0.02
Step 2: Substitute the value of y in the protein content equation:
0.025 * 100 + 0.021 * x + 0.019 * (1.6 - 0.019 * x) / 0.02 = 0.022 * (100 + x)
2.5 + 0.021 * x + 0.019 * (1.6 - 0.019 * x) = 2.2 + 0.022 * x
Step 3: Solve for x:
0.021 * x - 0.022 * x = 2.5 - 2.2 - 0.019 * 1.6 / 0.02
-0.001 * x = 0.3 - 0.00152
x = (0.3 - 0.00152) / -0.001
x ≈ 298.48
Step 4: Calculate y using the value of x:
y = (1.6 - 0.019 * 298.48) / 0.02
y ≈ 200.05

For more such questions on final mixture.

brainly.com/question/2803514

#SPJ11

The current passing through a 1.5-m length of straight wire that experiences a maximum force of 1.4 N in a uniform magnetic field of 1.8 T is 0.52 A.

Use the formula for magnetic force on a current-carrying wire:

F = BIL

where F is the magnetic force (1.4 N), B is the magnetic field strength (1.8 T), I is current, and L is the length of the wire (1.5 m).


I = F / (B * L)

I = 1.4 N / (1.8 T * 1.5 m)

I = 1.4 / 2.7 = 0.5185185 A

I ≈ 0.52 A

Therefore, a current of 0.52 A must be passing through the wire.

To know more about magnetic force click here:

https://brainly.com/question/3160109

#SPJ11

Answer:

The time interval between 1:02:32 pm and 1:03:10 pm is 38 seconds. During this time interval, the ant travels at a speed of 1 cm/s, so it will travel a distance of:

distance = speed x time

distance = 1 cm/s x 38 s

distance = 38 cm

Starting at the 5.0 cm position on the meter stick, the ant will travel 38 cm in 38 seconds, ending up at:

5.0 cm + 38 cm = 43.0 cm

Therefore, the ant will be at the 43.0 cm position on the meter stick at 1:03:10 pm.

Answer:

43.0 cm

Explanation:

The ant is traveling at a speed of 1 cm/s. At 1:02:32 pm, the ant is at the 5.0 cm position on the meter stick. The time difference between 1:02:32 pm and 1:03:10 pm is 38 seconds. Since the ant is traveling at a speed of 1 cm/s, in 38 seconds it will have traveled a distance of 38 cm. Therefore, at 1:03:10 pm, the ant will be at the position of 5.0 + 38 = 43.0 cm on the meter stick.

Answer:

325 metre per second

Explanation:

since v=f x lamda. where lamda is wavelength and f is frequency and v is speed of sound

The speed of sound in air is 325 m/s. The speed of sound in air can be determined by multiplying the wavelength by the frequency.

The following formula can be used to determine the sound speed in air:

v = fλ

Where v is the speed of sound, f is the frequency of the sound wave, and λ is the wavelength of the sound wave.

In this case, the frequency of the sound wave is given as 250 Hz and the wavelength is given as 1.3 meters. Therefore, we can plug these values into the formula and solve for the speed of sound:

v = (250 Hz) x (1.3 m) = 325 m/s

So, the speed of sound in air with a frequency of 250 Hz and a wavelength of 1.3 meters is 325 meters per second.

To know more about speed of sound in air click here:

brainly.com/question/2279936

#SPJ11

a) The center of mass is 28 cm from the 800 g ball. b) The rotational kinetic energy is 0.63 J if the structure rotates about its center of mass at 100 rpm.

To find the center of mass of the system, we need to consider the mass and position of each component. Since the rod is 40 cm long and has a mass of 200 g, we can treat it as a point mass located at its midpoint, which is 20 cm from each ball. The center of mass is then the weighted average of the positions of the three point masses. Using the formula for the center of mass, we find that the center of mass is 28 cm from the 800 g ball.To find the rotational kinetic energy, we need to know the moment of inertia of the system and the angular velocity. Since the system is rotating about its center of mass, we can use the parallel axis theorem to find the moment of inertia. The moment of inertia of the two balls is 0.14 kgm^2, and the moment of inertia of the rod is 0.004 kgm^2. The total moment of inertia is then 0.144 kg*m^2. Converting 100 rpm to radians per second, we get an angular velocity of 10.47 rad/s. Using the formula for rotational kinetic energy, we find that the rotational kinetic energy is 0.63 J.

Learn more about rotational kinetic energy here:

https://brainly.com/question/30107920

#SPJ11

In a piston, the pressure is arranged from maximum pressure to minimum pressure in the following way:

Maximum pressure is at the top of the piston or the end that is opposite to the connecting rod, while minimum pressure is at the bottom of the end that is attached to the connecting rod. When the fuel-air mixture is ignited in the combustion chamber, it produces high-pressure gases that push the piston towards the connecting rod. This pressure decreases as the piston moves downwards, until it reaches the bottom of its stroke, where the pressure is at its lowest. The process then repeats itself as the piston moves back up towards the top of the cylinder. This movement is known as the piston's stroke. The pressure in the cylinder is controlled by various factors, including the size and shape of the combustion chamber, the fuel-air mixture ratio, and the timing of the ignition.

Learn more about piston here:

https://brainly.com/question/28044328

#SPJ4

The atoms will move parallel to the direction of the incoming wave due to the sound wave.

The atoms will move perpendicular to the direction of the incoming wave due to the light wave.

A sound wave is a mechanical wave that requires a medium to travel through, while a light wave is an electromagnetic wave that can travel through a vacuum.

Because sound waves are longitudinal waves, the medium's particles vibrate perpendicular to the wave's direction.Light waves are transverse waves, which means that the particles of the medium vibrate perpendicular to the direction of the wave.

When waves come into contact with atoms, they can cause the atoms to vibrate or move. The direction of this movement depends on the direction of the wave and the properties of the medium.

In general, sound waves can cause atoms to move parallel to the direction of the wave, while light waves can cause atoms to move perpendicular to the direction of the wave.

To know more about sound wave,visit:

https://brainly.com/question/21995826

#SPJ1

The amount of force necessary to keep it submerged in water is F=0.258N.

The force required to hold a table tennis ball submerged in water is calculated using the formula:

[tex]F =\frac{ (\rho * V * g) }{ A}[/tex]

Where F is the force, ρ is the water's density, V is the ball's volume, g is its gravitational acceleration, and A is its cross-sectional area.

The following formula is used to determine the ball's volume:

[tex]V = \frac{4}{3}*pi*r^3[/tex]

where r is the ball's radius.

The radius of the ball is half its diameter, thus:

[tex]r = 3.8 cm^2[/tex]

Therefore,

[tex]V = \frac{4}{3}*pi *(3.8 cm ^2)3\\V = 0.5222 cm3[/tex]

The cross-sectional area of the ball is calculated using the formula:

[tex]A = \pi * r^2\\\\A = \pi* (\frac{3.8 cm }{ 2})^2\\A = 4.5257 cm^2[/tex]

Substituting the values in the above formula,

[tex]F =\frac{ (0.084 g/cm^3 * 0.5222 cm^3 * 9.8 m/s^2) }{4.5257 cm^2}\\F = 0.258 N[/tex]

Hence, the force needed to keep it submerged in water is 0.258N

learn more about force refer:brainly.com/question/30526425

#SPJ1

Pulsars spin very rapidly when they're young but slow down due to emitting radiation. The correct answer is option a.

Pulsars are highly magnetized, rotating neutron stars that emit beams of electromagnetic radiation out of their magnetic poles. These beams can only be observed when they are oriented toward the observer, causing them to appear as pulses of radiation at regular intervals.

Pulsars were first observed in 1967 by Jocelyn Bell Burnell and Antony Hewish while studying interplanetary scintillation. Since their discovery, over 2,000 pulsars have been observed. Pulsars spin very rapidly, with some pulsars rotating hundreds of times per second.

They generally spin faster when they are young and slow down over time due to emitting radiation. Pulsars generally form from massive stars that have gone supernova. They emit radiation in a variety of wavelengths, including radio waves, X-rays, and gamma rays.

Therefore, Pulsars are known to spin very rapidly, with some rotating hundreds of times per second and they gradually slow down due to the loss of energy in the form of radiation.

To know more about Pulsars click here:

https://brainly.com/question/28271936

#SPJ11