A 58. 3g sample of NH3 is reacted with 126g O2, according to this reaction what is the limiting reagent? 4NH3 + 7O2 --> 4NO + 6H2O

Answers

Answer 1

The ratio of NH₃ to O₂ is less than 4:7, it means that NH₃ is the limiting reagent. Therefore, NH₃ will be completely consumed before O₂ and the amount of product formed will be determined by the amount of NH₃ available.

To determine the limiting reagent, we need to compare the amount of each reactant with their respective stoichiometric coefficients in the balanced chemical equation.

First, we convert the given masses of NH₃ and O₂ to moles using their molar masses:

58.3 g NH₃ × (1 mol NH₃ ÷ 17.03 g NH₃) = 3.42 mol NH₃

126 g O₂ × (1 mol O₂ ÷ 32 g O₂) = 3.94 mol O₂

Next, we compare the number of moles of NH₃ and O₂ to the stoichiometric coefficients in the balanced equation:

NH₃ : O₂ ratio = 4:7

To learn more about reagent follow the link:

brainly.com/question/26905271

#SPJ4


Related Questions

If a solid mixture of the three aromatic compounds shown below is placed in 3 m hcl, which is likely to dissolve?.

Answers

Ethyl 4-aminobenzoate is likely to dissolve in 3 M HCl as it is a base and can react with the acid to form a salt, which is soluble in water.

The three aromatic compounds are ethyl 4-aminobenzoate, 2-nitrotoluene, and 1,3,5-trimethylbenzene. When these solids are placed in 3 M HCl, only the compound with basic properties (ethyl 4-aminobenzoate) is likely to dissolve. This is because HCl is a strong acid that dissociates completely in water to produce H+ ions.

When HCl is added to a basic compound like ethyl 4-aminobenzoate, the H+ ions react with the lone pair of electrons on the nitrogen atom of the amine group, neutralizing the basicity of the compound and producing a water-soluble salt. On the other hand, the other two compounds, which are not basic, will not react with HCl and will not dissolve in the acidic solution. Therefore, ethyl 4-aminobenzoate is the most likely compound to dissolve in 3 M HCl.

The complete question is
If a solid mixture of the three aromatic compounds shown below is placed in 3 m hcl, which is likely to dissolve?

To know more about the Mixture, here

https://brainly.com/question/13720811

#SPJ4

16. Lab Analysis: You forgot to label your chemicals and do not know whether your unknown solution is strontium nitrate or magnesium nitrate. You use the solutions potassium carbonate and potassium sulfate in order to determine your mistake. unknown + potassium carbonate & unknown + potassium sulfate . Justify your unknown solution in complete sentences, using your observations and the solubility rules as evidence in your explanation.

Answers

Strontium nitrate is most likely the unknown solution based on the fact that it produces a white precipitate when combined with potassium carbonate but not when combined with potassium sulphate.

What causes aqueous solutions to precipitate?

A "chemical reaction occurring in an aqueous solution when two ionic bonds combine, yielding the creation of an insoluble salt" is what is meant by the term "precipitation reaction." Precipitates are the insoluble salts created during precipitation reactions.

What governs precipitation, exactly?

Antibodies and antigens interact to cause precipitation reactions. They are founded on the idea that two soluble reactants can combine to create one precipitate, which is an insoluble product. Lattice formation is necessary for these processes.

To know more about solution visit:-

https://brainly.com/question/30665317

#SPJ1

Benzoic acid, ch3cooh, is a weak acid with ka = 6.3 10-5.


ch3co,h(aq) + h2o(1) = h2o+(aq) + ch3co2 (aq)


1. calculate the ph of a 0.150 m benzoic acid solution. show all calculations.

Answers

The ph of a 0.150 m benzoic acid solution is 4.20 .Benzoic acid, ch3cooh, is a weak acid with ka = 6.3 10-5.

What is Benzoic Acid ?

Benzoic acid is a white, crystalline organic compound that occurs naturally in many fruits and vegetables. It is also produced synthetically, and is used as a food preservative and as a component in many other products. Benzoic acid is used to prevent the growth of certain bacteria and fungi in food, and is generally regarded as safe when used in small amounts.

The equation is pH = pKa + log([A-]/[HA]), where [A-] is the concentration of the conjugate base (in this case, CH3CO2-) and [HA] is the concentrWe can calculate the concentration of H+ in the solution by using the expression Ka = [H+][CH3CO2-]/[CH3COOH]

[H+] = Ka × [CH3COOH]/[CH3CO2-]

[H+] = (6.3 × 10-5)× (0.150 M)/(0.150 M)

[H+] = 6.3 × 10-5 M

The pH of the solution can then be calculated using the expression pH = -log[H+]

pH = -log(6.3 × 10-5)

pH = 4.20

To learn more about Benzoic Acid

https://brainly.com/question/28299797

#SPJ4

Can someone answer please, also please give the steps.

Answers

The volume (in milliliters) of the 2.00 M NaOH solution that can be produced from the reaction is 955 mL

How do i determine the volume of NaOH produced?

First, we shall determine the mole of 44.00 grams of Na that reacted. Details below:

Mass of Na = 44.00 grams Molar mass of Na = 22.99 g/mol Mole of Na =?

Mole = mass / molar mass

Mole of Na = 44 / 22.99

Mole of Na = 1.91 moles

Next, we shall determine the mole of NaOH obtained from the reaction. Details below:

2Na + 2H₂O -> 2NaOH+ H₂

From the balanced equation above,

2 moles of Na reacted to produced 2 moles of NaOH

Therefore,

1.91 moles of Na will also react to produce 1.91 moles of NaOH

Finally, we shall determine the volume of the 2.00 M NaOH produced. Details below:

Molarity of NaOH = 2.00 MMole of NaOH = 1.91 molesVolume of NaOH =?

Volume = mole / molarity

Volume of NaOH = 1.91 / 2

Volume of NaOH = 0.955 L

Multiply by 1000 to express in milliliter

Volume of NaOH = 0.955 × 1000

Volume of NaOH = 955 mL

Learn more about volume:

https://brainly.com/question/29144710

#SPJ1

Why porphyry copper is not generally found near areas where volcanic activity, often associated with plate collisions, has occurred in the past

Answers

Typically, the hydrothermal activity connected to magmatic intrusions in the Earth's crust produces porphyry copper deposits.

Although plate collisions and volcanic activity can supply the heat and fluid sources required for such hydrothermal activity, porphyry copper deposits are typically not found in regions where these processes have previously taken place because of the intense deformation and alteration associated with these occurrences that can destroy or displace the deposits. Furthermore, rather than porphyry copper deposits, the intense volcanic activity may lead to the formation of other types of the mineral deposits, such as epithermal or massive sulfide deposits hosted by the volcano.

To know more about porphyry copper deposits, here

brainly.com/question/25633332

#SPJ1

Is the hypothesis that a particular trait evolved by natural selection falsifiable? That is, if you thought a particular trait didn't evolve by natural selection, could you test that our for yourself, given sufficient time, resources, an an organism that isn't too difficult to study?
Group of answer choices
Yes, the hypothesis that a particular trait evolves by natural selection is falsifiable
No, the hypothesis that a particular trait evolved by natural selection is intrinsic to a modern understanding of biology and the *theory* of evolution by Natural Selection. Therefore in order to disprove that a particular trait evolved by natural selection, you would need to accumulate so much evidence that you could overturn that entire theory,.
It's impossible to tell - unlike other scientific theories, the idea that a trait evolved by natural selection is more of a philosophical position - you can't really test it
Yes, but to do that you would be required to show that the trait isn't heritable, and that it doesn't provide a fitness advantage, and that it doesn't vary in your population.

Answers

The hypothesis that a particular trait evolved by natural selection is indeed falsifiable. In fact, this is one of the foundational principles of the scientific method.

researchers must also consider alternative hypotheses and rule out alternative explanations before concluding that a trait evolved by natural selection.

The hypothesis that a particular trait evolved by natural selection is indeed falsifiable. In fact, this is one of the foundational principles of the scientific method.

To test whether a particular trait evolved by natural selection, researchers can design experiments or observational studies to investigate the trait's function and potential selective pressures. For example, they could manipulate the trait in question to see how it affects the organism's fitness, or compare the trait's frequency or variation across populations with different environmental conditions.

However, it's important to note that demonstrating that a trait evolved by natural selection does not necessarily mean that it is the only possible explanation for the trait's existence. Other evolutionary mechanisms such as genetic drift, gene flow, or mutation could also play a role in shaping the trait. Therefore, researchers must also consider alternative hypotheses and rule out alternative explanations before concluding that a trait evolved by natural selection.
Visit to know more about hypothesis:-

https://brainly.com/question/606806

#SPJ11

The hypothetical elements shown here (figures a—d) do not include hydrogen or helium. Which element would you expect to bond covalently with an oxygen atom to form a two-atom molecule?

Answers

There are so many elements that can be able to bond with oxygen in a covalent manner as shown below.

What elements bond covalently to oxygen?

Elements that can bond covalently with oxygen to form two-atom molecules include carbon (C), nitrogen (N), fluorine (F), chlorine (Cl), and many others.

The specific element that would form a covalent bond with oxygen depends on a variety of factors, including the electronegativity and valence electron configuration of the elements involved as shown.

Learn more about bonds:https://brainly.com/question/30480258

#SPJ1

2. These are materials that heat passes slowly or not at all

a. Insulators
b. Fuel
c. Sun
d. Conductors
e. Heat

3. It is substance that is combustible and produces heat when it is burned​

a. Insulators
b. Fuel
c. Sun
d. Conductors
e. Heat

Answers

Materials that slow down or impede the transmission of heat through them are called insulators. So the correct answer is the option: a.

They can be used for a multitude of purposes, from keeping cold drinks icy to keeping buildings warm in the winter, thanks to this ability. Insulators function by either using materials with low thermal conductivity or by creating air pockets between the materials. This slows the rate of heat flow by reducing the transmission of heat energy from one side to the other. Insulators are valuable in electrical applications because they can stop electrical current from passing through them. Option: a is correct.

To know more about insulators, here

brainly.com/question/24909989

#SPJ4

--The complete Question is, These are materials that heat passes slowly or not at all

a. Insulators

b. Fuel

c. Sun

d. Conductors

e. Heat --

A truck weighs 7280 pounds. If the pressure exerted by its tires on the ground is 87. 5 pounds per square centimeter,what is the area of one tire that in contact with the road

Answers

Area of one tire is: 20.8 square centimeters.


To find the area of one tire in contact with the road, we need to first determine the total pressure exerted by all tires. Assuming the truck has 4 tires, we can use the following formula:

Total weight (in pounds) = Pressure exerted by each tire (in pounds per square centimeter) × Total area of contact of all tires (in square centimeters)

Let's denote the area of one tire in contact with the road as A (in square centimeters). Then, the total area of contact of all tires would be 4A.

We can now plug in the values given:

7280 pounds = 87.5 pounds/square centimeter × 4A

To find A, we first divide both sides by 4:

1820 pounds = 87.5 pounds/square centimeter × A

Now, divide both sides by 87.5 pounds/square centimeter:

A ≈ 20.8 square centimeters

The area of one tire in contact with the road is approximately 20.8 square centimeters.

To know more about area-pressure calculation:

https://brainly.in/question/20711424

#SPJ11




If 500. 0 mL of a gas at 1. 99 atm of pressure is increased to 5. 25 atm, what is the new


volume if the temperature is constant?

Answers

Boyle's Law states that the product of the pressure and volume of a gas is constant when the temperature is held constant. Mathematically, this can be expressed as:

PV = k, where P represents pressure, V represents volume, and k is a constant value.

From this equation, it becomes evident that if the temperature remains constant, an increase in pressure will result in a decrease in volume, and vice versa. In simpler terms, when the temperature is constant, the volume of a gas is inversely proportional to its pressure.

To further illustrate this point, consider a gas enclosed in a piston. If the temperature remains constant and you apply more pressure to the piston by compressing it, the volume of the gas will decrease. Conversely, if you decrease the pressure by allowing the piston to expand, the volume of the gas will increase.

In summary, when the temperature of a gas is constant, its volume and pressure share an inverse relationship, as described by Boyle's Law. This means that an increase in pressure will lead to a decrease in volume, while a decrease in pressure will lead to an increase in volume.

To know more about Boyle's Law refer here

https://brainly.com/question/30367067#

#SPJ11

Use the following information to answer the following question

The following is a list of solutions that can be considered acids:

1.CH3COOH(aq)
2.HI(aq)
3.H2O(aq)
4.H₂CO3(aq)
5.HCOOH(aq)
6.NaHSO3(aq)

Match the following conditions to the acids listed above

__Acid with the highest electrical conductivity

__Acid which could also be a base according to the Modified Arrhenius Theory

__Polyprotic acid

__Ionizes at a rate of 2 ppb

Answers

The matchup are:

Acid with the highest electrical conductivity: HCl(aq)Acid which could also be a base according to the Modified Arrhenius Theory: H2O(aq)Polyprotic acid: H2CO3(aq)Ionizes at a rate of 2 ppb: HCOOH(aq)

What are the acids?

Acid with the highest electrical conductivity:

HCl(aq) has the highest electrical conductivity among common acids because it completely dissociates into H+ and Cl- ions in water, making it a strong acid. This means that it can conduct electricity very effectively in solution.

Acid which could also be a base according to the Modified Arrhenius Theory:

The Modified Arrhenius Theory defines an acid as a substance that donates protons (H+) in solution, and a base as a substance that accepts protons. While H2O(aq) is commonly thought of as a neutral substance, it can actually act as an acid or a base in certain

Note:  H2O(aq) is amphoteric, meaning it can act as an acid or a base according to the Modified Arrhenius Theory. H2CO3(aq) is a polyprotic acid, meaning it can donate multiple protons in a stepwise manner. HCOOH(aq) has a very low ionization constant, meaning it ionizes at a very slow rate compared to other acids.

Read more about acids here:

https://brainly.com/question/25148363

#SPJ1

Select the best answer for the most reasonable synthesis of the target molecule below from ethyl acetate and any other reagents and starting materials needed

Answers

The best answer for the most reasonable synthesis of the target molecule below from ethyl acetate and any other reagents and starting materials needed is d.) Both a.) and b.)

The best approach for the synthesis of the target molecule from ethyl acetate involves a two-step reaction. First, ethyl acetate reacts with NaOEt (sodium ethoxide) in ethanol to form an intermediate compound. Then, this intermediate compound is further reacted with CHBr3 (bromoform) to form the target molecule. This synthesis is represented in answer choice a.).

Alternatively, the synthesis can be achieved by a three-step reaction sequence. In the first step, ethyl acetate is reacted with LDA (lithium diisopropylamide) to form an enolate intermediate. This intermediate is then reacted with CHBr3 to form a bromoalkene. Finally, the bromoalkene is oxidized using PCC (pyridinium chlorochromate) to form the target molecule. This synthesis is represented in answer choice b.).

Therefore, both answer choices a.) and b.) are reasonable approaches for the synthesis of the target molecule from ethyl acetate.

To learn more about synthesis, here

https://brainly.com/question/30575627

#SPJ4

The complete question is:

Select the best answer for the most reasonable synthesis of the target molecule below from ethyl acetate and any other reagents and starting materials needed. (Image attached)

The particles of a gas effuse 2. 76 times faster than particles of CCl4 at the same temperature. What is the unknown gas?

Answers

The rate of effusion of a gas is inversely proportional to the square root of its molar mass. This means that if the rate of effusion of one gas is 2.76 times faster than another gas, then the ratio of their effusion rates is:

Rate of unknown gas / Rate of CCl4 = √(Molar mass of CCl4 / Molar mass of unknown gas)

Since we are trying to find the identity of the unknown gas, we can assign it the variable X. We can then rewrite the equation as:

Rate of X / Rate of CCl4 = √(Molar mass of CCl4 / Molar mass of X)

We know that the rate of X is 2.76 times faster than the rate of CCl4. Therefore:

Rate of X = 2.76 x Rate of CCl4

Substituting this into the equation above, we get:

2.76 x Rate of CCl4 / Rate of CCl4 = √(Molar mass of CCl4 / Molar mass of X)

Simplifying this equation, we get:

2.76 = √(Molar mass of CCl4 / Molar mass of X)

Squaring both sides of the equation, we get:

7.6176 = Molar mass of CCl4 / Molar mass of X

Multiplying both sides by the molar mass of X, we get:

Molar mass of X = Molar mass of CCl4 / 7.6176

The molar mass of CCl4 is 153.82 g/mol, so:

Molar mass of X = 153.82 g/mol / 7.6176 = 20.18 g/mol

Therefore, the unknown gas has a molar mass of 20.18 g/mol. To determine its identity, we would need to compare this value to the molar masses of known gases.

To know more about inversely refer here

https://brainly.com/question/30339780#

#SPJ11

What is the molar solubility of ag2cr04 in water? (ksp of ag2cro4 is 8.0 x 10-12)

Answers

The molar solubility of Ag₂CrO₄ in water is approximately 1.24 x 10^-4 mol/L.

The solubility of a salt in water can be calculated using its solubility product constant (Ksp) value. The Ksp expression for Ag₂CrO₄ is:

[tex]Ag_2CrO_4[/tex](s) ⇌ [tex]2Ag^+(aq)[/tex] + [tex]CrO_4^{2-}(aq)[/tex]

The Ksp expression for this equilibrium is:

Ksp = [Ag+]^2[[tex]CrO_4^{2-[/tex]]

where [Ag+] and [CrO₄²-] are the concentrations of Ag+ and CrO₄²- ions in the equilibrium, respectively.

Let's assume that the molar solubility of [tex]Ag_2CrO_4[/tex] in water is x mol/L. Since the Ag₂CrO₄ dissociates into 2 Ag+ ions and 1 [tex]CrO__4^2-[/tex] ion, the concentration of Ag+ ions and [tex]CrO_4^{2-}[/tex] ions in the equilibrium will be 2x and x, respectively. Substituting these values into the Ksp expression, we get:

Ksp = (2x)^2(x) = 4x^3

Now, we can solve for x:

Ksp = [tex]4x^3[/tex]

8.0 x [tex]10^-12[/tex] = [tex]4x^3[/tex]

[tex]x^3[/tex] = (8.0 x [tex]10^-12[/tex])/4

[tex]x^3[/tex] = 2.0 x [tex]10^{-12}[/tex]

x = (2.0 x [tex]10^{-12}[/tex])^(1/3)

x = 1.24 x [tex]10^{-4[/tex] mol/L

Therefore, the molar solubility of Ag₂CrO₄ in water is approximately 1.24 x [tex]10^{-4[/tex] mol/L.

To know more about molar solubility

https://brainly.com/question/28170449

#SPJ4

A student measured out 10. 0 mL of a 8. 0M sodium sulfide stock solution. The student then diluted the stock solution adding 20. 0 mL of distilled water. What is the concentration of the diluted solution?

Answers

The concentration of the diluted solution is 2.67 M. The student diluted the stock solution by adding 20 mL of distilled water to the 10 mL of 8.0 M sodium sulfide solution.

To find the concentration of the diluted solution, we can use the equation:

M1V1 = M2V2

Where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Substituting the values given, we get:

M1 = 8.0 M

V1 = 10.0 mL

V2 = 10.0 mL + 20.0 mL = 30.0 mL

M2 = ?

Using the equation and solving for M2, we get:

M2 = (M1V1) / V2

M2 = (8.0 M x 10.0 mL) / 30.0 mL

M2 = 2.67 M

Therefore, the concentration of the diluted solution is 2.67 M.

To know more about the stock solution refer here :

https://brainly.com/question/25256765#

#SPJ11

Which gas, Cl2 (g) or COCl2(g) , will deviate most from the ideal gas law at low temperature?



Justify your choice

Answers

COCl2(g) will deviate most from the ideal gas law at low temperature. The other name for COCl2(g) is Phosgene. This is because COCl2(g) is a larger molecule with stronger intermolecular forces than Cl2(g). At low temperatures, these intermolecular forces become significant and cause the molecules to be closer together, resulting in a smaller molar volume than predicted by the ideal gas law.

Additionally, COCl2(g) is a polar molecule, which also contributes to the deviation from the ideal gas law as the polar interactions between molecules become stronger at low temperatures. Thus COCl2(g) will be the one deviating from the ideal gas law at low temperature.

Learn more: brainly.com/question/1946554

#SPJ11

A0.205g sample of caco3(mr=100.1g/mol) is added to a flask a long with7.50 mlof2.00mhcl. caco3(aq)+2hcl(aq)→ cacl2(aq)+h2o(l)+co2(g) enough water is then added to make a 125.0ml solution. a10.00ml aliquot of this solution is taken and titrated with 0.058m naoh. naoh(aq)+hcl(aq)→ h2o(l)+nacl(aq) how many ml of naoh are used?​

Answers

129.3 mL of NaOH are required to react with all the HCl in the 10.00 mL aliquot.

To solve this problem, we need to use stoichiometry and the concept of limiting reagents.

First, let's calculate the number of moles of HCl used in the reaction:
7.50 mL of 2.00 M HCl = 0.015 mol HCl

Next, let's use stoichiometry to determine the number of moles of CaCO₃ that reacted with the HCl:
1 mol CaCO₃ reacts with 2 mol HCl
0.015 mol HCl x (1 mol CaCO₃ / 2 mol HCl) = 0.0075 mol CaCO₃

Now we can use the mass and molar mass of CaCO₃ to determine the mass of CaCO₃ used:
mass CaCO₃ = number of moles x molar mass
mass CaCO₃ = 0.0075 mol x 100.1 g/mol = 0.751 g

However, this mass was used to make a 125.0 mL solution, so we need to calculate the concentration (in M) of this solution:
0.751 g / 125.0 mL = 0.006008 M

Now we can use the volume and concentration of the NaOH solution to determine the number of moles of NaOH used:
10.00 mL of 0.058 M NaOH = 0.00058 mol NaOH

Finally, we can use stoichiometry to determine the volume of NaOH required to react with all the HCl in the 10.00 mL aliquot:
1 mol HCl reacts with 1 mol NaOH
0.0075 mol HCl x (1 mol NaOH / 1 mol HCl) = 0.0075 mol NaOH
volume of NaOH = number of moles / concentration
volume of NaOH = 0.0075 mol / 0.058 M = 0.1293 L = 129.3 mL

Therefore, 129.3 mL of NaOH are required to react with all the HCl in the 10.00 mL aliquot.

To know more about stoichiometry :

https://brainly.com/question/28780091

#SPJ11

A 2.3 l container holds 0.39 moles of nz gas at 315 k. what is the pressure inside the container?

Answers

The pressure inside the container is 4.57a atm.

To solve for the pressure inside the container, we can use the Ideal Gas Law equation, which states:

PV = nRT

Where:
P = pressure (in atm)
V = volume (in liters)
n = moles
R = gas constant (0.08206 L.atm/mol.K)
T = temperature (in Kelvin)

Plugging in the given values, we get:

P(2.3 L) = (0.39 mol)(0.08206 L.atm/mol.K)(315 K)

Simplifying this equation, we get:

P = (0.39 mol)(0.08206 L.atm/mol.K)(315 K) / 2.3 L

P = 4.57 atm

Therefore, the pressure inside the container is 4.57 atm.

Know more about Ideal Gas Law equation here:

https://brainly.com/question/4147359

#SPJ11

Translate the following balanced chemical equation into words.

Ba3N2(aq) + 6H2O(l) → 3Ba(OH)2(s) + 2NH3(g)

A. Barium nitrogen reacts with water to yield barium hydroxide and nitrogen hydrogen.

B. Barium nitrate reacts with water to yield barium oxide and nitrogen hydride.

C. Boron nitride reacts with water to yield boron hydroxide and nitrogen trihydride.

D. Barium nitride reacts with water to yield barium hydroxide and nitrogen trihydride.

Answers

D. barium nitride reacts with water to yield barium hydroxide and nitrogen trihydride.


Ba_3N_2 is Barium nitride, 6H2O is 6 water molecules, Ba(OH)_2 is Barium hydroxide, and NH_3 is nitrogen trihydride/ammonia.
(aq) = aqueous solution, (s) = solid, (g) = gas, and (l) = liquid.
So, D. barium nitride reacts with water to yield barium hydroxide and nitrogen trihydride.

A 31. 4 gg wafer of pure gold initially at 69. 7 ∘C∘C is submerged into 64. 1 gg of water at 26. 8 ∘C∘C in an insulated container. The specific heat capacity for gold is 0. 128 J/(g⋅∘C)J/(g⋅∘C) and the specific heat capacity for water is 4. 18 J/(g⋅∘C)J/(g⋅∘C)? Part A What is the final temperature of both substances at thermal equilibrium?

Answers

A 31.4 g gold wafer initially at 69.7°C is submerged into 64.1 g of water at 26.8°C. The final temperature at which both substances reach thermal equilibrium is 31.9°C.

The final temperature of both substances at thermal equilibrium needs to be determined.

We can use the principle of conservation of energy. Since the system is insulated, the heat lost by the gold will be equal to the heat gained by the water.

The heat lost by the gold can be calculated using:

Q = mcΔT

where Q is the heat lost, m is the mass of the gold, c is its specific heat capacity, and ΔT is the change in temperature.

Similarly, the heat gained by the water can be calculated using:

Q = mcΔT

where Q is the heat gained, m is the mass of the water, c is its specific heat capacity, and ΔT is the change in temperature.

Setting these two equations equal to each other and solving for the final temperature, we get:

[tex]m_{\text{gold}} \cdot c_{\text{gold}} \cdot (T_{\text{final}} - T_{\text{initial\_gold}}) = m_{\text{water}} \cdot c_{\text{water}} \cdot (T_{\text{final}} - T_{\text{initial\_water}})[/tex]

where [tex]$m_{\text{gold}}$[/tex] is the mass of the gold, [tex]c_{\text{gold}}[/tex] is its specific heat capacity, [tex]T_{\text{initial\_gold}}[/tex] is its initial temperature, [tex]m_{\text{water}}[/tex] is the mass of the water, [tex]$c_{\text{water}}$[/tex] is its specific heat capacity, and [tex]T_{\text{initial\_water}}[/tex] is its initial temperature.

Plugging in the values we get:

[tex]31.4 \, \text{g} \times 0.128 \, \text{J/(g} \cdot \text{°C)} \times (T_{\text{final}} - 69.7^\circ\text{C}) = 64.1 \, \text{g} \times 4.18 \, \text{J/(g} \cdot \text{°C)} \times (T_{\text{final}} - 26.8^\circ\text{C})[/tex]

Solving for [tex]$T_{\text{final}}$[/tex], we get:

[tex]T_{\text{final}} = \frac{(31.4 \, \text{g} \times 0.128 \, \text{J/(g} \cdot \text{°C)} \times 69.7^\circ\text{C}) + (64.1 \, \text{g} \times 4.18 \, \text{J/(g} \cdot \text{°C)} \times 26.8^\circ\text{C})}{(31.4 \, \text{g} \times 0.128 \, \text{J/(g} \cdot \text{°C)}) + (64.1 \, \text{g} \times 4.18 \, \text{J/(g} \cdot \text{°C)})}[/tex]

[tex]$T_{\text{final}}$[/tex] = 31.9°C

Therefore, the final temperature of both substances at thermal equilibrium is 31.9°C.

To know more about the thermal equilibrium refer here :

https://brainly.com/question/29419074#

#SPJ11

Form a hypothesis You are cleaning out a cabinet beneath the kitchen sink and find an unused steel wool scrub pad has rusted completely. Will the remains of this pad weigh more or less than when it was new?

Answers

My hypothesis is that the remains of the steel wool scrub pad will weigh less than when it was new due to the process of oxidation causing the rusting.

When steel wool comes into contact with oxygen and moisture, it undergoes a chemical reaction known as oxidation. This reaction causes the iron in the steel wool to form iron oxide or rust. Since rust is less dense than iron, the steel wool scrub pad will weigh less when it is completely rusted.

It is important to note that the weight loss may be minimal, as rust is still composed of iron and oxygen, so the difference in weight may not be noticeable. Additionally, other factors such as the amount of time the pad has been rusting and the type of steel wool used may also affect the final weight.

In conclusion, my hypothesis is that the remains of the steel wool scrub pad will weigh less than when it was new due to the process of oxidation causing rusting, but the difference in weight may not be significant.

To know more about oxidation, visit:

https://brainly.com/question/30281969#

#SPJ11

if a compound has four degrees of unsaturation and shows signals in its 1h nmr spectrum between 7.0 - 8.0 ppm, what structural feature is likely to be present in the compound? select answer from the options below a cyclohexyl ring

Answers

The quantity of pi bonds and rings in a compound affects how many degrees of unsaturation are present. The presence of four pi bonds is suggested by combination of four degrees of unsaturation.

The chemical shift range of 7.0-8.0 ppm in 1H NMR spectra is typically associated with presence of aromatic protons. Therefore, if a compound with four degrees of unsaturation shows signals in its 1H NMR spectrum between 7.0-8.0 ppm, it is likely to contain an aromatic ring or multiple aromatic rings. It is important to note that other functional groups such as carbonyls, alkenes, and alkynes can also contribute to number of degrees of unsaturation, but these groups typically exhibit different chemical shift ranges in 1H NMR spectra.

To know more about pi bonds, here

brainly.com/question/30000552

#SPJ1

--The complete Question is, if a compound has four degrees of unsaturation and shows signals in its 1h nmr spectrum between 7.0 - 8.0 ppm, what structural feature is likely to be present in the compound? --

You are given 10. 34 grams of C7H14O7. How many moles of the compound do you have?

Answers

There are 0.0492 moles of the compound C7H14O7 when given 10.34 grams.

To determine how many moles of the compound C7H14O7 you have when given 10.34 grams, you need to follow these steps:

1. Calculate the molar mass of the compound C7H14O7:
- For carbon (C), there are 7 atoms, each with a molar mass of 12.01 g/mol.
- For hydrogen (H), there are 14 atoms, each with a molar mass of 1.01 g/mol.
- For oxygen (O), there are 7 atoms, each with a molar mass of 16.00 g/mol.

2. Add up the molar masses:
- Molar mass of C7H14O7 = (7 * 12.01) + (14 * 1.01) + (7 * 16.00) = 84.07 + 14.14 + 112.00 = 210.21 g/mol.

3. Use the formula to convert grams to moles:
- Moles = mass (grams) / molar mass (g/mol)

4. Plug in the values and solve for moles:
- Moles of C7H14O7 = 10.34 grams / 210.21 g/mol = 0.0492 moles.

So, you have 0.0492 moles of the compound C7H14O7 when given 10.34 grams.

To know more about compound, visit:

https://brainly.com/question/13516179#

#SPJ11

If 7.34 mol of o2 react completely calculate the grams of co2 produced​

Answers

If 7.34 mol of O₂ reacts completely, the grams of CO₂ produced is  161.44 grams.

To calculate the grams of CO₂ produced when 7.34 mol of O₂ reacts completely, you'll need to use stoichiometry.

Step 1: Write the balanced chemical equation for the reaction. For the combustion of a hydrocarbon, the general equation is:

C_xH_y + O₂ -> CO₂ + H₂O

However, you need to know the specific hydrocarbon in order to balance the equation and proceed. Assuming the hydrocarbon is methane (CH4) for the sake of demonstration, the balanced equation is:

CH₄ + 2O₂ -> CO₂ + 2H₂O

Step 2: Identify the mole-to-mole ratio between O₂ and CO₂ in the balanced equation. In this case, the ratio is 2:1.

Step 3: Use the mole-to-mole ratio to find the moles of CO₂ produced when 7.34 mol of O₂ reacts completely:

(1 mol CO₂ / 2 mol O₂) × 7.34 mol O₂ = 3.67 mol CO₂

Step 4: Convert moles of CO₂ to grams by using the molar mass of CO₂ (12.01 g/mol for C and 16.00 g/mol for O):

3.67 mol CO₂ × (12.01 g/mol C + 2 × 16.00 g/mol O) = 3.67 mol CO₂ × 44.01 g/mol CO₂ = 161.44 g CO₂

So, when 7.34 mol of O₂ reacts completely, 161.44 grams of CO₂ are produced.

Learn more about O₂ https://brainly.com/question/30429142

#SPJ11

675.0 mL of air is at 32.0 °C. What is the volume at 75.0 °C?

Answers

Answer: 770 mL

Explanation:

Charles' law states that [tex]\frac{V_{1} }{T_{1} } =\frac{V_{2} }{T_{2} }[/tex], so as temperature increases, volume does as well. We can plug in our values for V₁,T₁,and T₂ to this equation and solve for V₂, using L for volume and, importantly, kelvin for temperature. (kelvin is 273 + celsius).

[tex]\frac{0.675}{305} =\frac{V_{2} }{348} \\V_{2}=0.770 L[/tex]

A student is collecting data for the reaction of baking soda and vinegar. The initial temperature of the vinegar is 25˚ C and the final temperature of the reaction is 19˚ C. Identify the reaction as endothermic or exothermic and explain what is happening in terms of energy of the systems and the surroundings.

Answers

Answer:

According to the data supplied, the reaction of baking soda and vinegar is exothermic. Exothermic reactions transfer energy from the system to the environment, often in the form of heat. The beginning temperature of the vinegar was 25 degrees Celsius, and the ultimate temperature of the reaction was 19 degrees Celsius, indicating that heat was released into the environment. This is consistent with an exothermic process, in which energy is released and transmitted to the surroundings. As a result of the chemical interaction between baking soda and vinegar, carbon dioxide gas is created, and heat is emitted.

5.Which of the following elements was present in Mendeleev’s periodic table?
(a)Sc
(b) Tc
(c) Ge
(d) None of these

Answers

The element Sc (Scandium) was present in Mendeleev's periodic table. Therefore, the correct answer is (a) Sc.

Mendeleev's periodic table:

Mendeleev's periodic table is a chart that organizes all known elements based on their atomic number, chemical properties, and recurring patterns in their physical and chemical properties.

The periodic table consists of rows (called periods) and columns (called groups). Elements in the same group have similar chemical properties, while elements in the same period have the same number of electron shells.

Mendeleev published the first version of his periodic table in 1869, which included 63 elements known at that time. Scandium (Sc) was discovered in 1879 by Lars Fredrik Nilson and was later added to the periodic table in its proper position based on its atomic number and chemical properties.

On the other hand, Technetium (Tc) was not present in Mendeleev's periodic table because it was not discovered until 1937, long after Mendeleev's death. Similarly, Germanium (Ge) was not discovered until 1886, after the publication of Mendeleev's periodic table, but it was added to the periodic table in its proper position based on its properties.

To know more about electron shells, visit:

https://brainly.com/question/30464976

#SPJ9

1. From the chemicals listed on your lab handout, write down the weak acid (with its pKa) and its conjugate base that would create a buffer that best fits your protein. Would you expect for your buffer to have more acid or more base?


My assigned protein is Xylanase and has an optimum pH of 5. 5.


2. Buffers are used to the inhibit the change of pH upon the addition of strong acids and bases. If you were to add 0. 1 M HCl to your buffer, would you expect the pH to change? If so, would the pH increase or decrease? What would happen if 0. 1M NaOH were to be added instead?





3. Keeping your buffer composition from question 1 in mind, would you expect to use a larger volume of HCl or NaOH to change the pH of the buffer solution by one unit? Explain

Answers

1. Based on the information provided, a weak acid with a pKa close to the ideal pH of 5.5 would be the best buffer for Xylanase. Acetic acid (CH3COOH) can be utilised as the weak acid component of the buffer since it has a pKa of 4.76, which is close to the ideal pH.

Acetate ion (CH3COO-), its conjugate base, can also be utilised as a buffering agent. Since Xylanase prefers an acidic pH (below 7), we would anticipate the buffer to contain more acid than base.

2. The pH of the buffer would drop if 0.1 M HCl was introduced because the weak acid would arise when the H+ ions from the HCl react with the conjugate base in the buffer.

Instead, if 0.1 M NaOH was added, the pH would rise as the weak acid in the buffer reacts with the NaOH's OH- ions to form the conjugate base. The capacity of the buffer and the quantity of HCl or NaOH injected, however, would determine how much the pH changed.

3. It would take more HCl to raise the pH by one unit in the buffer in question 1 since it contains a weak acid and its conjugate base. This is due to the fact that the conjugate acid might be created when the weak acid component of the buffer reacts with extra H+ ions to limit significant pH shifts.

On the other hand, if NaOH were to be added to the buffer, the buffer's acid component would be consumed, causing a greater pH change.

Learn more about Buffer here:

https://brainly.com/question/9458699

#SPJ4

What is correlation coefficient vs coefficient of determination?

Answers

The correlation coefficient and the coefficient of determination are two statistical terms that are often used to measure the relationship between two variables.

The correlation coefficient, also known as Pearson's correlation coefficient (r), is a measure of the strength and direction of the linear relationship between two variables. It ranges from -1 to 1, where -1 indicates a strong negative relationship, 1 indicates a strong positive relationship, and 0 indicates no relationship.

To calculate the correlation coefficient, you will need to find the covariance of the variables, as well as their standard deviations, and then divide the covariance by the product of the standard deviations.

On the other hand, the coefficient of determination (R²) is a measure of how much of the variance in one variable can be explained by the variance in another variable. It is the square of the correlation coefficient and ranges from 0 to 1.

A value of 0 indicates that none of the variance in the dependent variable can be explained by the independent variable, while a value of 1 indicates that 100% of the variance can be explained.

In summary, the correlation coefficient is a measure of the strength and direction of the relationship between two variables, while the coefficient of determination measures the proportion of variance in one variable that can be explained by the other variable.

Both of these coefficients are essential in understanding the relationship between variables and can be used to make predictions in various fields, such as finance, social sciences, and natural sciences.

To know more about correlation coefficient, visit:

https://brainly.com/question/15577278#

#SPJ11

Compare the mile traveled by light in one year to the distance across the United States (3 000 miles or


the circumference of Earth 25 000 miles).

Answers

The distance traveled by light in one year, also known as a light-year, is approximately 5.88 trillion miles (9.46 trillion kilometers).

To put the distance of a light-year into perspective, it is equivalent to traveling around the Earth's equator more than 236 times. In astronomical terms, a light-year is used to measure the distance between stars and galaxies. For example, the nearest star to our solar system, Proxima Centauri, is about 4.24 light-years away from Earth.

In comparison, the distance across the United States is much smaller. It would take around 50 million trips from one coast to the other to cover the same distance as a light-year. Similarly, the circumference of the Earth is significantly smaller, with light traveling around the planet's equator approximately 7.5 times in a single second.

To learn more about light follow the link:

brainly.com/question/1851642

#SPJ4

Other Questions
contrast the reasons for US involvement in lebanon,grenada,and south africa. A 634. 5 g sample of helium absorbs 125. 7 calories of heat. The specific heat capacity of helium is 1. 241 cal/(gC). By how much did the temperature of this sample change, in degrees Celsius? How the genes found in DNA can make different proteins? After evaluating his colleague's claim about plant pathogens beingcarried in African dust clouds, the ecologist decides to isolate andgenetically test fungi samples from all of his outdoor and greenhouseplants. He compares the results to DNA samples of the Alternaria fungicommonly found in both North America and Africa, as shown in thistable.Genetic Similarity of Alternaria Fungi from Ecologist's Sampleswith Common Species Found in North America and AfricaAlternariaSpecies123PlantLocationGreenhouseOutdoorsOutdoorsPercent Similarityto NorthAmerican Species90%92%10%(PercentSimilarity toAfrican Species20%14%88%44HEAVANThe African Alternaria species causesdisease to the ecologist's plants. Whichspecies of Alternaria would most likelycause damage to the ecologist's plants, andwhere could the ecologist keep his plants tohelp protect them from this species ofAlternaria? Enter yourswer in the boxprovided.UTEI Two different box-filling machines are used to fill cerealboxes on the assembly line. The critical measurement influenced bythese machines is the weight of the product in the machines. Engineers are quite certain that the variance of the weight ofproduct is ^2=1 ounce. Experiments are conducted using bothmachines with sample sizes of 36 each. The sample averages formachine A and B are xA=4. 5 ounces and xB =4. 7 ounces. Engineers seemed surprisedthat the two sample averages for the filling machines were sodifferent. a. Use the central limit theorem to determineP(XB- XA >= 0. 2)under the condition that A=Bb. Do the aforementioned experiments seem to, in any way,strongly support a conjecture that the two population means for thetwo machines are different? Question 4(Multiple Choice Worth 2 points) (Identifying Transformations LC) Use the image to determine the type of transformation shown. Graph of polygon VWXYZ with W at point 3 comma negative 2. A second polygon V prime W prime X prime Y prime Z prime with W prime at point negative 3 comma negative 2. 270 counterclockwise rotation Horizontal translation Reflection across the x-axis Reflection across the y-axis What is the magnitude of the electrostatic force exerted bysphere a on sphere b?2. 0 m-b+1. 0 x 10-6c-1. 6 x 10-60 Need helpppp10 N10 NNet Force:Is it balanced or unbalanced? Vanessa's team played 8 games of basketball. During those 8 games her team's score was: 68, 76, 63, 58, 64, 75, 78 and 78. What is the mean absolute deviation?Please help!! Please answer it correctly too!!!! Whoever gets it correct gets brainliest!! and then I will give them 154 points!!!! please!! Calculate the voltage generated by a hydrogen - oxygen fuel cell at 73.5Cwhen the partial pressures of hydrogen and oxygen are 19.8 atm. Pls help me I need it Why could a lesson easily go off- track if there are no constructive alignment? Steph Curry posts a video of a puppy playing the piano and shares it with 4 of his friends. The video goes viral and the number of shares increases by a factor of 10 every minute. a. Write an equation to model this situation. b. What is the average rate of change for the number of shares from 2 minutes to 4 minutes? ) Nadia buys 4 1/5 pounds of plums. Nadia used a 55 cent coupon off her entire purchase. Her total after the coupon was $3. 23. If c represents the cost per pound for the plums, create and solve an equation to determine the cost per pound for the plums What is 7-12 problems. The image is attached. In which situation does one country have an absolute advantage over another country?A. government charges lower taxesB. workers earn higher wagesC. production costs are lowerD. infrastructure is more advancedI think its could be C or D but I dont know 1. Sally Rose's charge account statement showed a previous balance of $6,472. 82, a finance charge of $12. 95,new purchases of $1,697. 08, and a payment of $4,900. 50. What is her new balance?a. $3,454. 99c. $3,566. 44b. $3,282. 35d. $3,112. 78 Which circuit would generate 2,016W of power? PLEASE I NEED HELP ASAP8.4, 42, 210,....In the sequence above, each term after the first is equal to the previous term times n. What isthe value of the next term in the sequence?(A) 650(B) 825(C) 1,050(D) 3,050(E) 5,250 Writing: Evaluate Food ADS Targeted At Childern: ( Research magazines, newspapers, mailers, internet ads, television, billboards and any other advertising medium for food ads targeted to kids. Distinguish between ads that are promoting healthy products to those that are promoting unhealthy products. Evaluate the tactics that the food companies use to convince kids and parents to buy their products. Give your opinion about what is good and bad about what you discover. Write 500 words about your research and opinions concerning food advertising and childern. ( Will Mark Brainliest but have to actually answer the question correctly).