The bullet stops moving on hitting on a surface. Hence, the impulse here is equal to the momentum. Therefore, the mass of the bullet is 0.1 Kg.
What is impulse?Impulse in physics is the change in momentum. It is the product of the force and change in time.
hence, impulse = f. dt
When the bullet is travelling with a velocity of 500 m/s it has a momentum. When it brought to rest, momentum become zero. Thus, the momentum is equal to the impulse here.
Therefore, f.dt = m. v
f.dt = 50 N s
v = 500 m/s
m = 50 N s/500 m/s = 0.1 Kg
Therefore, the mass of the bullet is 0.1 Kg.
Find more on impulse:
https://brainly.com/question/904448
#SPJ1
if a copper coin with a volume of exactly 50 cubic cm is dropped into the volume of water ,how much water will be overflown(given that the container was completely filled with water)
Answer:
50 cubic cm
Explanation:
As the water displaces 50 cubic centimeters the amount of water that must leave the container for it to be able to be dropped into it is also 50 cubic as the water which was in its place must have gone somewhere.
Which particles in an atom are acted upon by the strong force?
A. Protons and electrons
B. Electrons and neutrons
C. Protons, neutrons, and electrons
D. Neutrons and protons
Neutrons and protons in an atom are acted upon by the strong force.
what is strong force?Strong force or strong nuclear force, a fundamental interaction of nature that acts between subatomic particles of matter. The strong force binds quarks together in clusters to make more-familiar subatomic particles such as protons and electrons.
what are quarks?Quarks are fundamental building blocks of matter. They are most commonly found inside protons and neutrons.
The strong interaction that keeps protons together is a different kind of force (the strong nuclear force) which does not affect electrons.So being only option in which electrons are not present , option D is the correct answer.
Learn more about strong force here- https://brainly.in/question/6906618
#SPJ2
1. For a person who has a mass 60 kg, calculate their force due to gravity,
otherwise know as "weight," in newtons if the person is in space.
Answer:
Explanation:
Given that gravity on the Moon has approximately 1/6th of the strength of gravity on Earth, a man who weighs 60kg on Earth would weigh approximately 10kg on the Moon. His mass, however, remains constant.
When you perform the skill of _____________, you must track the object before receiving it.
kicking
striking
catching
throwing
Answer:
uhh that is a hard question
Explanation:
cathcing or throwing
When you perform the skill of catching, you must track the object before receiving it. Therefore, option (C) is correct.
What are manipulative skills?Manipulative skills can be described as those skills which require the ability to handle an object or piece of equipment with control. They involve skills such as striking, kicking, dribbling, or catching a ball.
Manipulative skills involve moving an object with the hands or feet to get a goal or fulfill a task. The objects might be used as equipment or toys such as balls, bats, racquets, or jump ropes. Manipulative skills are also called object-control skills.
Types of Manipulative Skills are Bouncing, Catching, Dribbling (moving a ball with the feet), Kicking or rolling, Lifting, Pushing and pulling (the object might be a wheeled toy), Striking (such as swinging a baseball bat), Throwing, and Volleying.
Therefore, we track the object before receiving during catching,
Learn more about Manipulative Skills, here:
https://brainly.com/question/14621320
#SPJ2
Teddy is playing with toy cars on his driveway. He rolls two cars directly at each other so that they will have a head-on collision. Their momentums before and after the collision are shown in the table below.
Momentum Before Momentum After
Car 1 9 g · m/s -2 g · m/s
Car 2 -6 g · m/s 4 g · m/s
Which of the following is true?
A.
This situation does not show a closed system.
B.
The situation shows a closed system.
C.
Car 2 has more mass than Car 1.
D.
Car 2 had a greater velocity before the collision than Car 1 had.
The true statement is " this situation does not show a closed system" because the linear momentum is not conserved.
option A is the correct answer.
What is the principle of conservation of linear momentum?
The principle of conservation of linear momentum states in a closed or isolated system, the total momentum of the system is always conserved.
Mathematically, the formula for the conservation of linear momentum is given as;
Pi = Pf
where;
Pi is the sum of the initial momentum of the systemPf is the sum of the final momentum of the systemm₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
where;
m₁ is the mass of the first objectm₂ is the mass of the second objectu₁ is the initial velocity of the first objectu₂ is the initial velocity of the second objectv₁ is the final velocity of the first objectv₂ is the final velocity of the second objectThe given momentum of the toy cars before and after collision;
Momentum Before Momentum After
Car 1 9 g m/s -2 g m/s
Car 2 -6 gm/s 4 g m/s
Sum of the momentum before the collision = 9 gm/s - 6 g m/s = 3 g m/s
Sum of the momentum after the collision = -2 gm/s + 4 gm/s = 2 g m/s.
The above does not show conservation of linear momentum, hence the system is closed because of the momentum is lost.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The Astronomical Unit (AU) as defined by astronomers is
Answer:
a unit of length effectively equal to the average, or mean, distance between Earth and the Sun
Explanation:
describe an experiment to show that air support burning
The environment affects people, but people don't affect the environment.
TRUE OR FALSE
Answer: False
Explanation:
The statement that the environment affects people, but people don't affect the environment is incorrect. It should be noted that people also affect the environment.
Some of our impact on the environment include pollution, deforestation, overpopulation, burning of fossil fuels etc. Thus has resulted in changes such as erosion, climate change, etc.
what happened to the weight of an object when it is taken from Earth to the Moon? why?
Answer:
the weight of the object decreases when it is taken from the Earth to the Moon
Explanation:
The weight of an object is defined as the product of the mass of the object with the acceleration due to gravity of the Planet.
[tex]W =mg[/tex]
where,
W = weight of the object
m = mass of the object
g = acceleration due to gravity on the planet
The mass of an object remains constant everywhere in the universe. Therefore, the weight is directly proportional to the value of acceleration due to gravity.
The value of acceleration due to gravity on the Moon is lesser than its value on the Earth.
Hence, the weight of the object decreases when it is taken from the Earth to the Moon
Water enters a shower head
through a pipe of radius 0.00712 m
at 4.25 m/s. How much time does
it take for 1.00 m^3 of water to flow
through the pipe?
Answer: 1477.14 should be right
Explanation:
trust
The time needed for 1.00 [tex]m^{3}[/tex] of water to flow through the pipe is 1,478.16 sec .
What is volume of cylinder?The volume of a cylinder is the capacity of the cylinder which calculates the amount of material quantity it can hold.
Formula of volume of a cylinder:
V = πr²h
Here,
'r' is the radius of the base (circle) of the cylinder
'h' is the height of the cylinder
According to the question
Water enters a shower head through a pipe of radius 0.00712 m at 4.25 m/s.
As pipe is a cylinder
Therefore
r = 0.00712 m
Speed = height filed by pipe in a second = 4.25 m/s
Now,
Time it take for 1.00 m³ of water to flow through the pipe
Let time needed = t
By using volume of a cylinder
V = πr²h
1 m³ = 3.14 * (0.00712)² * 4.25 * t
1 m³ = 0.000676516768 * t
t = 1,478.16 sec
Hence, The time needed for 1.00 [tex]m^{3}[/tex] of water to flow through the pipe is 1,478.16 sec .
To know more about volume of a cylinder here:
https://brainly.com/question/16134180
#SPJ2
wha is the movement of the balloon when brought near to the can after removing your hand?
Answer:
the answer is static electricity
What conditions determine which process occurs in a cell?
The conditions that determine which process occurs in a cell are largely based on the environment and the needs of the cell.
What is cell?A cell is the basic unit of life. It is the smallest unit of an organism that is capable of independent functioning. Cells are composed of a variety of molecules, including proteins, lipids, carbohydrates, and nucleic acids. Cells are able to carry out functions such as energy production, metabolism, growth and division, movement, and communication.
These conditions include the availability of nutrients, the presence or absence of specific signaling molecules, the amount of oxygen, and the temperature. In addition, the genetic makeup of the cell and its response to internal and external cues can also determine which processes occur.
To learn more about cell
https://brainly.com/question/3717876
#SPJ1
A box is pushed with a 245 N of force on a horizontal surface as it moves with a
constant velocity. The mass of the box is 104 kg. The box experiences a force of friction
of 45 N.
a. Draw a free body diagram with Fg, FN, F₂ and F₁.
b. Find the weight of the box.
c. Find the coefficient of friction as the box is moving.
d. Find the net force acting the box.
Answer:
Explanation:
b) Fg = W = mg = (104 kg)(9.8 m/s²) = 1019.2 N (weight of the box)
Ff = (coeff. friction)(N)
N = normal force = Fg = 1019.2 N
c) coeff. friction = Ff/N = 45 N/1019.2 N = 0.044
d) Fnet = 245 N - 45 N = 200 N
It's hard to draw a free body diagram with the available symbols, but here's a try at it. Just add a box between the arrows!
W
↓
Ff → ← Fapplied
↑
N
A 68.2 kg high jumper leaves the ground with a vertical velocity of 8 m/s. How high can he jump? The acceleration of gravity is 9.8 m/s². Answer in units of m.
Find the full load primary and secondary current of a 230/115V, 2kVA transformer.
The full load primary current of a 230/115V, 2kVA transformer can be calculated using the formula:
I_primary = (2kVA * 1000 VA/kVA) / (230V)
I_primary = 8.7V
The full load secondary current of the transformer can be calculated using the formula:
I_secondary = (2kVA * 1000 VA/kVA) / (115V)
I_secondary = 17.4V
Therefore, the full-load primary current of the transformer is approximately 8.7V, and the full-load secondary current is approximately 17.4V. It is important to note that these values are based on the assumption that the transformer is operating at its full load capacity. If the transformer is operating at a lower load, the primary and secondary currents will be correspondingly lower.
explained why the thread behaves in this manner
35 points! Will give brainliest!
What will happen to the force between the two magnets if they are pulled farther apart?
A) The force would be weaker.
B) The force would be stronger.
C) The force would stay unchanged.
D) The force would reverse the poles.
Answer:
B the force would be weaker
Un tren de engranajes
Answer:Un tren de engranajes es un sistema mecánico formado por el montaje de engranajes en un marco para que los dientes de los engranajes se acoplen.
Explanation:
La relación de los círculos de paso de los engranajes acoplados define la relación de velocidad y la ventaja mecánica del conjunto de engranajes. Un tren de engranajes planetarios proporciona una alta reducción de engranajes en un paquete compacto.
Claudia carried a box that weighed 40 N up the stairs. She did 600 J of work in 10 seconds. How much power did she have? O A. 40 W B. 15 W C. 6,000 W D. 60 W
Answer:
[tex]\text{Remember: Power is given by:}\frac{Work}{Time}\\\therefore \frac{600J}{10sec}=60\text{ Watts of Power-D}[/tex]
Please help!
Two pieces of clay, one white and one gray, are thrown through the air. The white clay has a
momentum of 25 kg. M/s and the gray clay has momentum of -30 kg m/s immediately
before they collide.
What is the magnitude and direction of their final momentum immediately after the collision?
When two objects collide in two dimensions (for example, x and y), the momentum will be conserved separately in each direction (as long as there isn't an external impulse in that direction).
One white and one gray piece of clay are flung through the air. The 25-kilogram mass of the white clay?The momentum before and after a direct impact between two pieces of clay is maintained. The amount of initial kinetic energy lost during the impact as a fraction is 0.961.
What is the difference between the total momentum of two objects before and after a collision?The total momentum of the two objects prior to the collision equals the total momentum of the two following the collision when object 1 and object 2 collide in an isolated system. The momentum obtained by object 2 equals the momentum lost by object 1, and vice versa.
to know more about magnitude and direction here:
brainly.com/question/29766788
#SPJ1
Place a few small weights on top of the cylinder to slightly compress the gas inside. Consider the air in the entire system. Assuming that the system remains perfectly sealed, describe how each of the following changes (if at all). Wherever possible, explain your answers in terms of changes to the individual molecules of air that produces the macroscopic changes.
a. Volume
b. Pressure
c. Temperature
d. Number of molecules
P wave for 100km time= distance/speed , T=100km/6.1km/s
In the figure below, what is the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm?
In the figure below, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.
What is oscillation?Periodic or oscillatory motion is defined as a motion that repeats itself. Due to a restoring force or torque, an object in such motion oscillates around an equilibrium position.
Energy is conserved in oscillation.
So, the maximum loss in Potential Energy = Maximum gain in Kinetic energy
5 J - 1 J = Maximum gain in Kinetic energy
Maximum gain in Kinetic energy = 4 J
[tex]0.5 \times m \times vmax^2 = 4\\0.5 \times 2.0 \times 10^-3\; Kg \times vmax^2 = 4 J\\vmax^2 = 4 \times 10^3 m^2/s^2\\vmax = 63.2 m/s[/tex]
Therefore, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.
To learn more about oscillation, refer to the link:
https://brainly.com/question/27542934
#SPJ1
An engine develops 500 Nm of torque at 3900 rev/min. The power developed by the engine is ...
Answer:
204kW
Explanation:
P = t x ω = 500 x (2πx3900/60) = 204203W = 204kW
The power developed by the engine is equal to 204.1 KW.
What is the relation between power and torque?Torque can be defined as the rotational equivalence of linear force while power is defined as the rate of doing work. The relation between torque and power scalar product of torque and angular velocity.
The relation between power and torque can be expressed mathematically as:
[tex]{\displaystyle {P = \tau \times \omega[/tex]
Where P is the power which is work done per unit of time, τ is the torque, and ω is the angular velocity.
Given, the torque that the engine develops, τ = 500 Nm
The angular velocity, ω = 3900 rev/min
ω = 3900 × 2×3.14/60
ω = 408.2 rad/s
The power developed by the engine can be calculated as:
P = 500 Nm × 408.2 rad/s
P = 2041100 W
P = 204.1 KW
Learn more about Power and torque, here:
https://brainly.com/question/26984435
#SPJ2
A box is at rest on a table. What can you say about the forces acting on the box?
The upward
and the downward
are balanced.
Answer:
normal force and gravitational force
Explanation:
I hope this helps :D
Which variable can be measured with a weighing balance?
Answer:
ratio variables
Ratio scale of measurement
Weight, height and distance are all examples of ratio variables. Data in the ratio scale can be added, subtracted, divided and multiplied. Ratio scales also differ from interval scales in that the scale has a 'true zero'. The number zero means that the data has no value point
How much force is necessary to raise a 150n crate up a ramp to a 4m loading dock if 600 j or work are performed
Answer:
To solve this problem, you can use the formula for work, which is work = force x distance. In this case, the distance the crate is moved is the height of the loading dock, or 4 meters. The amount of work performed is given as 600 joules. So, you can set up the equation like this:
600 joules = force x 4 meters
To solve for the force, you can divide both sides of the equation by 4 meters:
600 joules / 4 meters = force x 4 meters / 4 meters
This simplifies to:
150 newtons = force
So, the force necessary to raise the 150-newton crate up the ramp to the 4-meter loading dock is 150 newtons.
Based on the image shown, write the number that corresponds to the term or phrase. Assume that the electrons flow counterclockwise from 3 to 2 to 1, from 5 to 4 to 5, and to 3.
Anode:
3
Cathode:
Electrolytes:
1
Salt bridge:
5
Electrode where oxidation occurs:
4
The reaction that takes place in this cell is
✔ spontaneous
.
Based on the image shown, the numbers that correspond to the term or phrase assuming that the electrons flow counterclockwise from 3 to 2 to 1, from 5 to 4 to 5, and to 3 are:
Anode: 3Cathode: 1Salt bridge: 4Electrolytes: 5Electrode where oxidation occurs: anodeThe reaction that takes place in this cell is spontaneousWhat are electrochemical cells?Electrochemical cells are cells that convert chemical energy to electrical energy.
The components of an electrochemical cell are:
anodecathodeelectrolytesalt bridgeLearn more about electrochemical cells at: https://brainly.com/question/10470515
#SPJ1
a boy of 40kg and a girl of a mass an unknown mass plays on a seesaw of negligible weigh. If the boy sits 300cm from the pivot and the girl sits 400m from the pivot what is the mass of the girl in order for the seesaw to be in equilibrium
The mass of the girl is 30 kg in order for the seesaw to be in equilibrium.
What is seesaw?A particular kind of lever is a seesaw, which has a long beam coupled to a pivot known as the fulcrum.
As soon as you sit on one side of the beam and apply weight on one end, the beam falls to the ground. This is because the weight of your body is being pulled down by the force of gravity, along with the beam.
Let the mass of the girl = m kg
In equilibrium;
40 kg × 300 cm = m × 400 cm
⇒ m = 30 kg.
Hence, the mass of the girl is 30 kg.
Learn more about seesaw here:
https://brainly.com/question/28566147
#SPJ1
How long would you have to film something in HD to collect 1 PB of data?
all day for 2 consecutive weeks
all day for 365 days (or 364 days in a leap year)
all day for about 3.5 years
all day for one light year
Time required to film something in HD to collect 1 PB of data is all day for about 3.5 years.
What is Petabyte?A petabyte, or 2 to the 50th power of a byte, is a unit of measurement for memory or data storage. One exabyte is equal to about 1,024 petabytes (PB), or 1,024 terabytes (TB).
Although traditional network-attached storage (NAS) can handle petabytes of data and is expandable, it might be resource-intensive to traverse the system's ordered storage index.
A common laptop or desktop computer has 16 GB of random access memory for storage (RAM).
Learn more about Petabytes here:
https://brainly.com/question/29060237
#SPJ1