A car of 900 kg mass is moving at the velocity of 60 km/hr. It is
brought into rest at 50 metre distance by applying brake. Now,
calculate the force required to stop the car. [Ans: 2500 N] class 9

Answers

Answer 1

Answer:

2500N.

Explanation:

SEE THE IMAGE FOR SOLUTION

HOPE IT HELPS

HAVE A GREAT DAY

A Car Of 900 Kg Mass Is Moving At The Velocity Of 60 Km/hr. It Isbrought Into Rest At 50 Metre Distance
Answer 2

Explanation:

Force = mass × acceleration

Mass = 900kg

Acceleration = velocity ÷ time

Velocity = 60km/hr = 60 × 1000 ÷ 3600

Velocity = 60000 ÷ 3600

Velocity = 16.67m/s

To get the time

Velocity = Distance ÷ time

16.67 = 50 ÷ time

Cross multiply

16.67 × time = 50

time = 50 ÷ 16.67

time = 3 seconds

Acceleration = 16.67 ÷ 3

Acceleration = 5.56m/s²

Therefore, Force = 900 × 5.56

Force = 5004 Newton


Related Questions

write the maximum number of electrons that can be accommodated in the s,p,d,f subshells​

Answers

Answer:

S=2,P=6,D=10,F=14. The total number of electrons contained by s,p,d,f subshells is 32

3. An electric motor is used to lift a 6.0 kg of mass through a height of 1 metre. The energy it uses is measure on an energy meter is 10 joules.

a) Calculate the work done in lifting the mass​

Answers

Answer:

Climbing stairs and lifting objects is work in both the scientific and everyday sense—it is work done against the gravitational force. When there is work, there is a transformation of energy. The work done against the gravitational force goes into an important form of stored energy that we will explore in this section.

Figure 1. (a) The work done to lift the weight is stored in the mass-Earth system as gravitational potential energy. (b) As the weight moves downward, this gravitational potential energy is transferred to the cuckoo clock.

Let us calculate the work done in lifting an object of mass m through a height h, such as in Figure 1. If the object is lifted straight up at constant speed, then the force needed to lift it is equal to its weight mg. The work done on the mass is then W = Fd = mgh. We define this to be the gravitational potential energy (PEg) put into (or gained by) the object-Earth system. This energy is associated with the state of separation between two objects that attract each other by the gravitational force. For convenience, we refer to this as the PEg gained by the object, recognizing that this is energy stored in the gravitational field of Earth. Why do we use the word “system”? Potential energy is a property of a system rather than of a single object—due to its physical position. An object’s gravitational potential is due to its position relative to the surroundings within the Earth-object system. The force applied to the object is an external force, from outside the system. When it does positive work it increases the gravitational potential energy of the system. Because gravitational potential energy depends on relative position, we need a reference level at which to set the potential energy equal to 0. We usually choose this point to be Earth’s surface, but this point is arbitrary; what is important is the difference in gravitational potential energy, because this difference is what relates to the work done. The difference in gravitational potential energy of an object (in the Earth-object system) between two rungs of a ladder will be the same for the first two rungs as for the last two rungs.

Converting Between Potential Energy and Kinetic Energy

Gravitational potential energy may be converted to other forms of energy, such as kinetic energy. If we release the mass, gravitational force will do an amount of work equal to mgh on it, thereby increasing its kinetic energy by that same amount (by the work-energy theorem). We will find it more useful to consider just the conversion of PEg to KE without explicitly considering the intermediate step of work. (See Example 2.) This shortcut makes it is easier to solve problems using energy (if possible) rather than explicitly using forces.

More precisely, we define the change in gravitational potential energy ΔPEg to be ΔPEg = mgh, where, for simplicity, we denote the change in height by h rather than the usual Δh. Note that h is positive when the final height is greater than the initial height, and vice versa. For example, if a 0.500-kg mass hung from a cuckoo clock is raised 1.00 m, then its change in gravitational potential energy is

mgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 Jmgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 J

Note that the units of gravitational potential energy turn out to be joules, the same as for work and other forms of energy. As the clock runs, the mass is lowered. We can think of the mass as gradually giving up its 4.90 J of gravitational potential energy, without directly considering the force of gravity that does the

The quantity of matter inside the body is?

Answers

Answer:

MASS

Explanation:

mass is the quantity of matter contained in the body.

one meter equals how many miles, yards, feet, inches?

Answers

Answer:

0.000621 mile

1.094 yards

3 feet 3.37 inches

39.37 inches

Answer:

1m = 0.000621371 miles = 1.09361 yards = 3.28084 feet = 39.3701 inches

A crane can lift 5000 kg mass to the height 10m in 10 sec. What is its power?​

Answers

Answer:

49.050 KW

Explanation:

work done = PE

= mgh

=5000×9.81×10

=490500J

power = workdone/Time taken

= 490500/10

= 49050 watts

= 49.050kW

power is rate of doing work
work done = force x distance

force is ma
5000 x 10
50000
or 5000x 9.81
49,050

rate means divide by time
49,050/50000 divide by 10

4905/5000W

Help with these please​

Answers

Answer:

I'll just give short and simple explanation .

Explanation:

when the distance between the masses are doubled but the masses remain the same then,

the gravitational force between two masses decrease by four times when the distance between them is doubled.

hope this helped you

any confusion then comment it.

What is 2.34x10^3x5.1x10^-2 in significant figures.

Answers

Answer:

5 significant figures

Explanation:

As the question does not state any term in 'significant figures', I will provide the number and the number of significant figures.

First of all, the number. 2.34 × 10³ = 2340, and 5.1 × 10^-2 = 0.051, therefore. 2340 × 0.051 = 119.34.

This will be equal to 5 significant figures.

A bullet fired from a pistol travelled 50 metres to the target in 0.08s. What was its speed?

Answers

Its speed is 4m/s

Jdbsjsjsjsnjdjdjdd

If a neutron’s relative mass is listed as 1, what would be the relative mass of a proton and an electron?

Answers

Answer:

The relative mass of the proton would be 1 and that of the electron

would be about 1/1840.

The elevators in the John Hancock building in Chicago move 783 ft in 33 s. What is this speed in miles per hour?

Answers

Answer:

16.18 mph

Explanation:

the speed of elevators =

(783×3600)/(33×5280) =

2,818,800/174,240 = 16.18 mph

Motion is generally defined as an increase in distance

Answers

Answer:

motion is the act of changing location or position

Answer:

Motion is generally defined as an increase in distance with respect to time.

Without time it can't be said in motion

what is mean mechanical advanteg​

Answers

Answer:

The ratio of the force produced by a machine to the force applied to it, used in assessing the performance of a machine is called mechanical advantage.

what would happen if measurements such as mass,length,volume,or temperature weren't standardized and everyone made up their own units

Answers

Answer:

The world would have been blown up by now.

Explanation:

Hypothetically, lets say that someone gave Kim Jong boi a cup of coffee.

He gets mad at the "public servant" since it didn't contain 3 posafa43asdunds of sugar which makes him "big".

The public servant claims they added jfoaj4su38093 units of sugar, which is equivalent to 3 posafa43asdunds.

He gets mad and launches big cannons at Trump since he blames Boe Jiden.

Which statement describes the motion of a ball as it drops onto a vertical spring?
a. The acceleration of the ball decreases as the spring shrinks.
b. The accIleration of the ball decreases as the spring extends.
c. The velocity of the ball changes from positive to negative as the spring shrinks.
d. The velocity of the ball changes from negative to positive as the spring extends.

Answers

Answer:

F = M a    Newton's second law

F = - K x     force exerted by compressed spring

a = - K x / M

a) is true because the ball originally is accelerated due to gravity and this acceleration will decrease as the spring in compressed

One could argue for (d) if the downward direction was designated as negative

Prior to maximum compression of the spring the velocity would negative and as the spring began to extend (and the ball began move upward) the velocity of the ball would change from negative to positive

A box is 300 kg & it covers the area of 150 m2 find the pressure exerted by the box in the ground.​

Answers

Answer:

If we assume that the box is a cube with 150 m² surface area

Area of 1 face = 150 m² / 6 = 25 m²

The box will exert a downward force of

Force = mass * acceleration due to gravity

Force = 300 kg * 9.81 m/s² N

Force = 2943 N

The box exerts a pressure ( force / unit area) = 2943 N / 25 m²

Pressure = 117.7 N/m²

Thank you, if you found this helpful please comment.

9. Liquid A has a density of 1.27 g/mL and liquid B has a density of 0.78 g/mL. Both are poured into the same container. If the liquids do not react chemically, what will happen to the liquids ________________?

Answers

Liquid a does damage to 0..384

Liquid A has a density of 1.27 g/mL and liquid B has a density of 0.78 g/mL. Both are poured into the same container. If the liquids do not react chemically then the liquid B which has a density of 0.78 g/m would come over the liquid because it is a lighter fluid having less density than the liquid A

What is density?

It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.

formula for density

ρ = mass / volume

Liquids A and B have densities of 1.27 and 0.78 grams per milliliter, respectively. The same container receives both of them. If there is no chemical reaction between the liquids, then liquid B, which has a density of 0.78 g/m, would emerge on the top because it is a lighter fluid and has less density than liquid A.

Thus, If there is no chemical reaction between the liquids, then liquid B, which has a density of 0.78 g/ml, would emerge on the top because it is a lighter fluid and has less density than liquid A.

Learn more about density from here

brainly.com/question/15164682

#SPJ2

plz and I don't know this plz help me​

Answers

Answer:

Newton

it is derived of mass and displacement

_________at any particular point in a liquid is _________ in all directions​

Answers

Answer:

Pressure at any particular point in a liquid is transmitted in all directions

Explanation:

I hope you like my answer and my answer helped you .

1.
On a fishing trip you catch a bass, a rock cod, and a salmon with masses of 1.07 kg, 6.0 kg, and
6.05 kg, respectively. What is the total mass of your catch with the proper number of significant
figures?

Answers

The total mass of your catch is 13.1 kg

Since you have three fishes a bass, a rock cod, and a salmon with masses of 1.07 kg, 6.0 kg, and  6.05 kg, respectively,

The total mass of your catch = mass of bass + mass of rock cod + mass of salmon

= 1.07 kg + 6.0 kg + 6.05 kg

= 13.12 kg

Since the total mass of your catch is 13.12 kg and we have three catches with two catches to two decimal places and one catch to one decimal place.

We cannot have more decimal places in our answer than the number of decimal places in the number with the least number of decimal places.

Since the least number of decimal places is in the mass of the rock cod which is 6.0 kg, the total mass of our catch is thus 13.1 kg to one decimal place.

So, the total mass of your catch is 13.1 kg

Learn more about significant figures here:

https://brainly.com/question/17343107

A student has a block that has a volume of 150 cm3 and a density of 30 g/cm3

Answers

Answer:

mass of block = 4500g

Explanation:

density = mass/volume

mass = volume x density

         = 150 x 30

         = 4500 g

under what condition do the values of gravitational force and gravitational constant become same or equal​

Answers

Answer:

The values of gravitational force and gravitational constant become same or equal when product of masses involved equals the square of distance between them.

What is the Unit Of Electric current and Who is the Unit named after??
Pls help Asap​

Answers

Answer:

Amperes

Explanation:

It is named after a French physicist  André-Marie Ampère.

HOPE THIS HELPED

The unit of electric current is Ampere, and it is named after the French physicist André-Marie Ampère (1775 - 1836).

Hope it's helpful

What is the kinetic energy of a 500kg car traveling 50m/s

Answers

Answer: 625000 J

Explanation:

KE= (1/2)mv^2

m=500kg

v=50m/s

KE= (1/2 )(500)(50)^2

= 625000 J

2 ways that angular and linear momentum are alike and different

Answers

Answer:

Angular momentum is inertia of rotationmotion. Linear momentum is inertia oftranslation motion. The big difference is that the type of motion which is related to each momentum is different.

Right hand rule exercise
1. A wire in a magnetic field is acted on by a force into the plane of the page as shown
below.
F
What is direction of current induced in the wire?
A) Downwards
B) Upwards
2. A wire in a magnetic field is acted
busforce

Answers

Answer:

A yxiigxih5dd8yixc99uf8g

a.
1
S = ut +
1/2
at2
i. u as subject.

Answers

Answer:

[tex]s = ut + \frac{1}{2} at^{2} \\ ut = s - \frac{1}{2} a {t}^{2} \\ u = (s - \frac{1}{2} a {t}^{2} ) \div t \\ u = (s - \frac{1}{2} a {t}^{2} ) \times \frac{1}{t} \\ \\ u = \frac{s}{t} - \frac{1}{2t} a {t}^{2} \\ \\ u = \frac{s}{t} - \frac{1}{2} at \\ [/tex]

I hope I helped you^_^

Question 6.2
Calculate the reading on A2

Answers

Answer:

2.25A

Explanation:

that is the answer

How do you use a Beam Balance???

Answers

Your answer is in the attachment . Hope this helps.

help me i dont understand

Answers

Answer:

B

Explanation:

At the highest/maximum point the vertical velocity is zero because as the projectile is launched it eventually changes direction. At this instant it momentarily stop causing the maximum velocity to be zero.

hopefully this makes sense

:)

Waves are created on the surface of water when we drop a stone into it. Similarly you must have seen the waves generated on a string when both its ends are held in hand and it is shaken. Light is also a type of wave called the electromagnetic wave. Gamma rays, X-rays, ultraviolet rays, infrared rays, microwave and radio waves are all different types of electromagnetic waves. Astronomical objects emit these waves and we receive them using our instruments. All our knowledge about the universe has been obtained through these waves. Gravitational waves are a very different type of waves. They have been called the waves on the fabric of space-time. Einsteine predicted their existence in 1916. These waves are very weak and it is very difficult to detect them. Scientists have constructed extremely sensitive instruments to detect the gravitational waves emitted by astronomical sources. Among these, LIGO (Laser Interferometric Gravitational Wave Observatory) is the prominent one. Exactly after hundred years of their prediction, scientists detected these waves coming from an astronomical source. Indian scientists have contributed significantly in this discovery. This discovery has opened a new path to obtain information about the Universe. i. Which type of wave a light ray is ? (1 marks) ii. What type of rays are Gravitational waves called ? (1 marks) iii. Why are the gravitational waves difficult to detect ? (1 marks) iv. Give any four examples of electromagnetic waves.​

Answers

Answer:

gdfhf

Explanation:

jjjjcjbwwfbooob#kkkkkkkki!vdvdiiiiiibl#dnqljuwhgeyehrhrygrgdyhehegegeggegegegeegegegevegwgegegegsjkegsygegdydheheyrteeeudgeedyeyrf
Other Questions
Did Judson Webb deserve the consequences of his action - story ruthless Mark true or false IT questions1:you can change the default font style in word ( )2:A pie chart represent only one data series ( )3:MS-DOS is a graphical user interface operating system ( )4:a presentation software is a application software ( )5: only addition can be done in the ALU ( )fill in the blanks...............1:A ................... mouse is looking like a pencil2:A/An ......................... is an interface between the user and the computerunderline the correct answer1: the.......... function multiple the numbers in Excel add sumproductsMin2:to enter the data in multiple lineswrap textmerge and centerorientationall of these3:a list is used when the unordered of items is markedbulletednumberedboth a and bnon of these 4:the screen that you see after you signed in the computer wallpaperdesktopscreen savernon of these5:the ............. manages the working and control of a network device Device driverkernelfile systemall of these Two astronomers are viewing temperature data from each of the sun's layers, but the layers aren't identified. Describe one way the scientists can use temperature to identify which layer they are studying.(1 point) The highest temperatures are from the corona. The highest temperatures are from the corona. The lowest temperatures are from the photosphere. The lowest temperatures are from the photosphere. The lowest temperatures are from the core. The lowest temperatures are from the core. The highest temperatures are from the radiative zone. Some Word Problems 1. You are making sandwiches for a large crowd. All must be identical and must contain 2 slices of bread, 2 teaspoons mustard, 3 slices salami, 2 slices of cheese, 2 lettuce leaves, and 1 slice tomato. You have on hand 2 loaves of bread, 20 slices each 3 pounds of cheese, each pound gives 16 slices 1 quart of mustard 60 slices of salami An unlimited supply of tomatoes from your garden 3 head of lettuce, approximately 15 leaves in each How many sandwiches can you make? For which ingredients is (are) there no leftovers? In case you've forgotten your kitchen conversions: 1 quart = 4 cups; 1 cup = 16 tablespoons; 1 tablespoon = 3 teaspoons What is the meaning ofinsubordinate in the followingsentence?The insubordinate child ranfree, wreaking havoc on theschool.A. Insubordinate means to lower toanother level.B. Insubordinate means to step up to thenext level.C. Insubordinate means not curbed orrestrained.D. Insubordinate means curbed orrestrained. Evaluate the following expression the expression for perimeter of a rectanglewith a length of (x + 7) and a width of (2x) Plz help im giving 30 points a transistor has beta=180 calculate the approximate collector and base currents if the emitter current is 10ma HELPPPChamplaina. erected a fort at Quebecb. discovered Lake Champlainc. dealt fairly with the Indiansd. opened North America to French colonizatione, was called the "Father of New France"f. did all of these Dave has $15 to spend on an $8 book and twobirthday cards (c) for his friends. How much canhe spend on each card if he buys the same cardfor each friend? The heat of the welding can reach about how many Fahrenheit? Can anyone tell me the definition of protoplasm?I will mark the brainliest -5c+5c+2c6c12c-16 16=c Please answer this ASAP NO PHOTOS PLEASE Water basic chemical structure is best described as Guys answer this question The expression (4c 3d)(3c + d) is equivalent to:A. 12c2 13cd 3d2B. 12c2 13cd + 3d2C. 12c2 05cd 3d2D. 12c2 05cd + 3d2E. 12c2 03d2 Essential fatty acidsa. are synthesized by the liver.b.are a necessary precursor to cholesterol.c.cannot be synthesized by the body.d.are necessary for blood clotting. If there are 16 boys and 32 girls in a room, fill out all of the possible ratios of boys to girls that could be made. They already used 16:32 as an example