Answer:
Dept. Y = $18,200
Dept. Z = $21,800
Explanation:
Wages expense for this question consist of direct wages and indirect wages. The direct wages are allocated to their respective departments while the indirect wages are apportioned between the two departments.
Therefore, first do the allocation then the remainder $24,000 is apportioned equally between the two departments, Dept. Y and Dept. Z.
Dept. Y Dept. Z
Departmental wage expenses :
Direct wages $6,200 $9,800
Indirect wages $12,000 $12,000
Total $18,200 $21,800
Identify the relevant total quality management (TQM) technique for each example or description in the following table.
Example/Description
1.When a defense company needed to create quality software, they brought representatives from the Quality Assurance (QA) group in to work with software and systems engineers. The QA group found that peer reviews were the best way to catch software bugs, and they shared their knowledge with the head of software engineering. Working together with the engineers, the QA group started a system of peer reviews and formal inspections, and together, the group decreased the number of problems in the software the company produced.
A. Quality partnering
B. Continuous improvement
C. Quality circle
D. Benchmarking
2.Wausau Window and Wall Systems started this process with a commitment from the CEO that he and all other managers in the company would be trained in program fundamentals. Using this problem-solving methodology, Wausau relentlessly pursued higher quality and lower costs at its window trim plant. Intensive analysis led to a redesigned workflow that improved productivity by 100%.
A. Benchmarking
B.Continuous improvement
C. six sigma
D. Quality circle
3. At the Franklin Steel Products Plant in Franklin, Kentucky, employees from the Dana Corporation’s Perfect Circle Products unit manufacture as many as 3,500 different part numbers, primarily for automakers Ford, General Motors, and DaimlerChrysler, as well as thousands of after-market products. Despite the high-volume, high-mix environment, Dana Franklin has maintained a 99% on-time delivery rate to customers since 2001. The philosophy here is that with each unit produced, with each hour, with each day and each week, the plant gets just a little bit better.
A. Six Sigma
B. Quality circle
C. Continuous Improvement
D.Benchmarking
4.Which of the following factors is likely to have a negative impact on the success of a TQM program? Check all that apply.
A. TQM motivates employees and enriches jobs.
B. Middle managers fear that they will lose their authority.
C.Managers expect to see dramatic innovations as a result of TQM.
D. Employees are dissatisfied with working conditions.
Answer:
Following are the responses to the given choices:
Explanation:
In question 1 the answer is "Choice A" because this technology and creation of such technology staff are more knowledgeable but interacting within their various organizations is necessary to understand a business strategy to build appropriate solutions. In the current context Interplay with QA service also helped to provide the best options. In question 2 the answer is "Choice C" because it simply put, six-sigmas can identify which areas of changes related to the production system using the resources at the lowest cost possible. It is beneficial at a cheaper price. In question 3 the answer is "Choice C" because The Efficiency on a continuous basis by evaluating all of the areas necessary Its change by optimal use of that was a sign of high potential growth and development.In question 4 the answer is "Choice B, C, and D" TQM represents Total Quality Management, which indicates that it considers all areas necessary to improve and advance in general.When two countries decide to engage in specialization and exchange the advantage is: Group of answer choices Their production possibilities frontier will shift outward. They will be able to consume at a point outside their production possibilities frontier. They will be able to produce and consume at a point outside their production possibilities frontier. They will be able to produce at a point outside their production possibilities frontier.
Answer:
They will be able to consume at a point outside their production possibilities frontier.
Explanation:
The Production possibilities frontiers is a curve that shows the various combination of two goods a company can produce when all its resources are fully utilised.
The PPC is concave to the origin. This means that as more quantities of a product is produced, the fewer resources it has available to produce another good. As a result, less of the other product would be produced. So, the opportunity cost of producing a good increase as more and more of that good is produced.
Factors that cause the PPF to shift
1. changes in technology.
2. changes in available resources.
3. changes in the labour force.
A country engages in the specialisation of a good for which it has a comparative advantage in its production and purchases goods for which it has a comparative disadvantage in its production .
an advantage of specialisation is that it allows countries to consume goods for which its not efficient in its production. Thus it allows to consume unattainable goods given the resources of the country. As a result, they will be able to consume at a point outside their production possibilities frontier.
The Gamma Corporation made a public announcement today in which it shared its plans to buy back its common stock shares in the total amount of $62,000. Right now, this corporation has 420,000 stock shares outstanding. The price for each share in today's market is $47.09.
After buying back the stock shares, the price for each share will equal:
After buying back the stock shares, the price for each share will equal t0 $8.10.
What are the shares about?To calculate the price per share after the buyback, you need to first determine the total value of the buyback. To do this, you can multiply the number of shares being bought back (62,000) by the price per share ($47.09).
(62,000) * ($47.09) = $2,906,180, this is value for the buyback.
Next, you need to find the total number of shares outstanding after the buyback. To do this, you can subtract the number of shares being bought back (62,000) from the total number of outstanding shares (420,000).
So: (62,000 -420,000) = 358,000
This gives you a total of 358,000 outstanding shares after the buyback.
Finally, you will have to divide the total value of the buyback ($2,906,180) by the total number of outstanding shares after the buyback (358,000) to find the price per share. This gives you a price per share of $8.10 after the buyback.
Learn more about stock from
https://brainly.com/question/28539863
#SPJ1
Exercise 8-6 Selling and Administrative Expense Budget [LO8-7] Weller Company's budgeted unit sales for the upcoming fiscal year are provided below: 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Budgeted unit sales 31,000 33,000 24,000 29,000 The company’s variable selling and administrative expense per unit is $3.00. Fixed selling and administrative expenses include advertising expenses of $8,000 per quarter, executive salaries of $50,000 per quarter, and depreciation of $30,000 per quarter. In addition, the company will make insurance payments of $5,000 in the first quarter and $5,000 in the third quarter. Finally, property taxes of $7,000 will be paid in the second quarter. Required: Prepare the company’s selling and administrative expense budget for the upcoming fiscal year. (Round "Per Unit" answers to 2 decimal places.)
Answer and Explanation:
The preparation of the company’s selling and administrative expense budget for the upcoming fiscal year is presented below
For determing this, we add the total of variable selling & admin expense and the fixed selling & admin expense and after calculating it we deduct the depreciation expense so that the cash disbursement can be come
Kindly find the attachment for the computation
Totally Serial Enterprises is considering the two mutually exclusive projects below. The cash flows from the projects are summarized below. Year ManBearPig Project Cash Flow Flying Car Cash Flow 0 -$100,000 -$200,000 1 25,000 50,000 2 25,000 50,000 3 50,000 80,000 4 50,000 100,000 What is the Flying Car’s modified internal rate of return (MIRR) at a 12% cost of capital? A. 14.6% B. 12.7% C. 15.9% D. 10.0% E. 13.0%
Answer:
B
Explanation:
The modified internal rate of return is a capital budgeting method used to determine the profitability of an investment. The MIRR assumes that cash inflows are reinvested at the firm's cost of capital and outflows are financed at the firm's financing cost.
MIRR = (Future value of a firm's cash inflow / present value of the firm's cash outflow)^ (1/n) - 1
n = number of years
present value of the firm's cash outflow = $200,000
Future value of a firm's cash inflow
Future value of year 1's cash flow = 50,000 x (1.12^3) = $70,246.40
Future value of year 2's cash flow = 50,000 x (1.12^2) = $62,720
Future value of year 3's cash flow = 80,000 x (1.12^1) = $89.600
Future value of year 1's cash flow = $100,000
Add the future values together = $322566.40
($322566.40 / $200,000)^0.25 - 1 = 12.7%
Within a an organizational structure, the person most likely to be evaluated in terms of controllable costs would be:___________.
a. A cost center manager.
b. A production line worker.
c. A graphic designer.
d. A payroll clerk.
e. A maintenance worke
Answer:
a. A cost center manager.
Explanation:
Cost center managers would be responsible for the transactions that are charged to the center. Here the managers would be responsible for creating the revenue budget and expenses for the cost center that should be on an annual basis
So according to the given situation, the controllable cost would be evaluated based on the cost center manager
hence, the option a is correct
Sure Tool Company is expected to pay a dividend of $2 in the upcoming year. The risk-free rate of return is 4%, and the expected return on the market portfolio is 14%. Analysts expect the price of Sure Tool Company shares to be $22 a year from now. The beta of Sure Tool Company's stock is 1.25. What is the intrinsic value of Sure's stock today?
a. $22.00
b. $12.12
c. $20.60
d. $20.00
Answer:
c. $20.60
Explanation:
Required return = Risk free rate + Beta*(Market rate-Risk free rate)
= 4 + 1.25*(14-4)
= 4 + 1.25*10
= 4 + 12.5
= 16.5%
Intrinsic value = Future dividend and value*Present value of discounting factor(rate%,time period)
= 2/1.165 + 22/1.165
= 1.7167 + 18.8841
= 20.6008
= $20.6
So, the intrinsic value of Sure's stock today is $20.60.
Why do you think most of the careers in finance or business require a four-year college degree?
Answer: Because they are hard and you definitely need something to show them that you know what you are doing especially in finance bc you are managing people’s money and could go to jail if you don't know the codes and laws and you could really hurt someone financially
Explanation:
Peters, Inc. produces 3 products: P1, Q2, and R3. P1 requires 400 purchase orders, Q2 requires 600 purchase orders, and R3 requires 1000 purchase orders. Peters has identified an ordering and receiving activity cost pool with allocated overhead of $390000 for which the cost driver is purchase orders. Direct labor hours used on each product are 50000 for P1, 40000 for Q2, and 110000 for R3. How much ordering and receiving overhead is assigned to each product
Answer:
P1 $78,000
Q2 $117,000
R3 $195,000
Explanation:
Calculation to determine How much ordering and receiving overhead is assigned to each product
First step is to calculate the price per order using this formula
Price per order= Total cost of purchase orders ÷ total purchase orders
Let plug in the formula
Price per order= $390000 ÷ (400 + 600 + 1,000)
Price per order= $390000 ÷2,000 orders
Price per order= $195
Now let determine How much ordering and receiving overhead is assigned to each product
Using this formula
Ordering and receiving overhead = Purchase orders × price per order
Let plug in the formula
P1 = 400 × $195
P1= $78,000
Q2 = 600 × $195
Q2=$117,000
R3 = 1,000 × $195
R3=$195,000
Therefore How much ordering and receiving overhead is assigned to each product are :
P1 $78,000
Q2 $117,000
R3 $195,000
Ramone's Drones Inc. makes local deliveries using small drones. Ramone is looking to hire an additional pilot to help with increased delivery needs. He currently brings in $8500 per month, but with the new pilot, thinks he'll be able to increase his revenue to $9750 per month.
Required:
What is the monthly marginal revenue from hiring the additional pilot, which is referred to as the marginal revenue product of labor or MRPL?
Answer:
$1250
Explanation:
The computation of the monthly marginal revenue is shown below;
As we know that
MRPL = (Change in Revenue ÷ Change in Labour)
Given that
Initial Revenue = $8500
New Revenue = $9750
So,
Change in Revenue = ($9750 - $8,500)
= $1,250
And,
Change in Labour = 1
So,
MRPL is
= $1250 ÷ 1
= $1250
1. When the quantity supplied cannot be increased, regardless of what the price may be, it is called
Operfect inelastic supply
O elasticity of price
O inelastic supply
O elastic supply
When the quantity supplied cannot be increased, regardless of what the price may be, it is called perfect inelastic supply. Thus the correct option is A.
What is Supply?Supply is referred to as making the availability of the demanded object in the market. This can be goods, commodities, or currencies as well. If the supply of demanded goods is not fulfilled it reflects scarcity.
Quantity supplied remains static regardless of price changes, which is referred to as perfectly inelastic supply. it is a circumstance in which businesses are only capable of providing a fixed number and are therefore unable to increase or decrease the amount regardless of price changes.
Therefore, option A is appropriate.
Learn more about perfect inelastic supply, here:
https://brainly.com/question/28192591
#SPJ1
Traditions Home Accessories Company manufactures decorative lamps using an activity-based costing system to allocate all manufacturing conversion costs. The following information is provided for the month of June: Activity Estimated Indirect Activity Costs Allocation Base Estimated Quantity of Allocation Base Materials handling $3,000 Number of parts 6,000 parts Assembling $7,200 Number of hours 3,000 hours Packaging $4,000 Number of lamps 2,000 lamps Four lamps can be assembled in 1 hour. Each lamp consists of 9 parts. The total direct materials cost per lamp is $8.00. What is the total manufacturing cost per lamp
Answer:
$15.10 per lamp
Explanation:
Cost per part of Material handling = $3000/6000 parts
Cost per part of Material handling = $0.50 per part
Assembling per hour = $7200/3000
Assembling per hour = $2.40 per hour
Packaging per lamp = $4000/2000
Packaging per lamp = $2 per lamp
Total manufacturing cost per Lamp = $8 + (9*$0.50) + ($2.40/4) + $2
Total manufacturing cost per Lamp = $8 + $4.5 + $0.6 + $2
Total manufacturing cost per Lamp = $15.10 per lamp
Following are the transactions of a new company called Pose-for-Pics. Aug. 1 Madison Harris, the owner, invested $11,000 cash and $47,300 of photography equipment in the company in exchange for common stock. 2 The company paid $3,800 cash for an insurance policy covering the next 24 months. 5 The company purchased office supplies for $2,090 cash. 20 The company received $2,950 cash in photography fees earned. 31 The company paid $878 cash for August utilities. Prepare general journal entries for the above transactions.
Answer:
Aug 01
Dr Cash 11,000
Dr Photography equipment 47,300
Cr Common stock 58,300
Aug 02
Dr Prepaid insurance 3,800
Cr Cash 3,800
Aug 05
Dr Office supplies 2,090
Cr Cash 2,090
Aug 20
Dr Cash $2,950
Cr Photography fees earned $2,950
Aug 31
Dr Utilities expense $878
Cr Cash $878
Explanation:
Preparation of the general journal entries
Aug 01
Dr Cash 11,000
Dr Photography equipment 47,300
Cr Common stock 58,300
(47,300+11,000)
Aug 02
Dr Prepaid insurance 3,800
Cr Cash 3,800
Aug 05
Dr Office supplies 2,090
Cr Cash 2,090
Aug 20
Dr Cash $2,950
Cr Photography fees earned $2,950
Aug 31
Dr Utilities expense $878
Cr Cash $878
What will happen when two countries trade based on comparative advantage?
(1 point)
A.
Each country will gain from international trade.
B.
Each country will lose from international trade.
C.
Each country will consume less of all the goods it can produce.
D.
Each country will produce more of all the goods it can produce.
Answer:
Explanation: Trade between two agents or countries allows the countries to enjoy a higher total output and level of consumption than what would have been possible domestically. ... Comparative advantage and opportunity costs determine the terms of trade for exchange under which mutually beneficial trade can occur.
Porter Co. is analyzing two potential investments. Project XProject Y Cost of machine$68,000 $60,000 Net cash flow: Year 1 24,000 4,000 Year 2 24,000 26,000 Year 3 24,000 26,000 Year 4 0 20,000 If the company is using the payback period method and it requires a payback of three years or less, which project(s) should be selected
Answer:
project x
Explanation:
2.8
The concept of competitive advantage focuses on a. what customers are willing to pay. b. the costs a firm incurs in delivering a product and/or service. c. increasing the wedge between what customers are willing to pay and the cost that the firm incurs. d. decreasing the wedge between what customers are willing to pay and the cost that the firm incurs. e. creating an attractive industry.
Answer:
c. increasing the wedge between what customers are willing to pay and the cost that the firm incurs.
Explanation:
Competitive advantage can be defined as conditions, factors or circumstances that allow a business firm (organization) to manufacture finished goods or services better and perhaps cheaper than other (rival) firms in the same industry. Thus, it's responsible for putting a business firm in a superior or more favorable position than rival firms.
This ultimately implies that, a competitive advantage has a significant impact on a business because it increases its level of sales, revenue generation and profit margin when compared to rival firms in the same industry.
Hence, the concept of competitive advantage focuses on increasing the wedge between what customers are willing to pay and the cost that the firm incurs. Generally, customers are willing to pay for a product or service provided they get value for their money and derive enough satisfaction from it.
The following present value factors are provided for use in this problem.
Periods Present Value of $1 at 11% Present Value of an Annuity of $1 at 11%
1 0.9009 0.9009
2 0.8116 1.7125
3 0.7312 2.4437
4 0.6587 3.1024
Cliff Co. wants to purchase a machine for $42,000, but needs to earn an 11% return. The expected year-end net cash flows are $14,000 in each of the first three years, and $18,000 in the fourth year. What is the machine's net present value?
a. $7,788
b. $4,069.
Answer:
B
Explanation:
Net present value is the present value of after-tax cash flows from an investment less the amount invested.
NPV can be calculated using a financial calculator
Only projects with a positive NPV should be accepted. A project with a negative NPV should not be chosen because it isn't profitable.
When choosing between positive NPV projects, choose the project with the highest NPV first because it is the most profitable.
Cash flow in year 0 = $-42,000,
Cash flow in year 1 = $14,000
Cash flow in year 2 = $14,000
Cash flow in year 3 = $14,000
Cash flow in year 4 = $18,000
I = 11 %
NPV = $4,069.
To find the NPV using a financial calculator:
1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.
2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.
3. Press compute
Selected accounts with some amounts omitted are as follows: Work in Process Oct. 1 Balance 24,500 Oct. 31 Goods finished X 31 Direct materials 91,700 31 Direct labor 186,600 31 Factory overhead X Finished Goods Oct. 1 Balance 14,600 31 Goods finished 343,900 If the balance of Work in Process on October 31 is $210,600, what was the amount of factory overhead applied in October?
Answer:
See below
Explanation:
Given the above, we will use the below to get the factory overhead
Ending finished goods = Opening balance + Direct materials + Direct labor + Factory overhead - Goods finished during the month
Fixing the values, we will have
= $14,600 + $91,700 + $186,600 + Factory overhead -
he following standards for variable manufacturing overhead have been established for a company that makes only one product: Standard hours per unit of output 8.2 hours Standard variable overhead rate $14.60 per hour The following data pertain to operations for the last month: Actual hours 2,875 hours Actual total variable manufacturing overhead cost $42,715 Actual output 150 units What is the variable overhead efficiency variance for the month
Answer:
See below
Explanation:
Firstly, we will calculate the standard hour
Standard hours = (Standard hours per unit × Actual output
= 8.2 × 150
= 1,230
Variable overhead efficiency variance
= Standard rate × ( Actual hours - Standard hours)
= $14.6 × (2,875 - 1,230)
= $14.6 × 1,645
= $24,017 U
The following events took place for Technology Treasures Manufacturing Company during January, the first month of its operations as a producer of digital video monitors: a. Purchased $138,600 of materials. b. Used $93,540 of direct materials in production. c. Incurred $182,560 of direct labor wages. d. Incurred $213,040 of factory overhead. e. Transferred $426,220 of work in process to finished goods. f. Sold goods for $660,000. g. Sold goods with a cost of $367,500. h. Incurred $86,200 of selling expense. i. Incurred $70,250 of administrative expense. Required: Using the information given, complete the following: a. Prepare the January income statement for Technology Treasures Manufacturing Company. Be sure to complete the statement heading. Refer to the lists of Accounts, Labels and Amount Descriptions list provided for the exact wording of the answer choices for text entries. Colons (:) will fill in where needed. Enter amounts as positive numbers unless the amount is a calculation that results in a negative amount. For example: Net loss should be negative. Expenses should be positive. b. Determine the Materials Inventory, Work in Process Inventory, and Finished Goods Inventory balances at the end of the first month of operations.
Answer:
Technology Treasures Manufacturing Company
a) Technology Treasures Manufacturing Company
Income Statement for the month ended January 31
Sales revenue $660,000
Cost of goods sold 367,500
Gross profit $292,500
Expenses:
Selling expense $86,200
Admin. expense 70,250 156,450
Net income $136,050
b) Ending balances of:
Materials Inventory, $45,060
Work in Process Inventory, $62,920
Finished Goods Inventory, $58,720
Explanation:
a) Data and Analysis:
a. Raw materials $138,600 Cash $138,600
b. Work in process$93,540 Raw materials $93,540
c. Work in process $182,560 Payroll expenses $182,560
d. Work in process $213,040 Factory overhead $213,040
e. Finished goods $426,220 Work in process $426,220
f. Cash $660,000 Sales revenue $660,000
g. Cost of goods sold $367,500 Finished goods $367,500
h. Selling expense $86,200 Cash $86,200
i. Administrative expense $70,250 Cash $70,250
Materials Inventory
Account Titles Debit Credit
Cash $138,600
Work in process $93,540
Ending balance 45,060
Work in Process Inventory
Account Titles Debit Credit
Raw materials $93,540
Payroll expenses 182,560
Factory overhead 213,040
Finished goods $426,220
Ending balance 62,920
Finished Goods Inventory
Account Titles Debit Credit
Work in process $426,220
Cost of goods sold $367,500
Ending balance 58,720
The current pandemic revealed gaps in Occupational health and wellness programs. Researchers found that a healthy workforce is a productive workforce. There are a number of workplace stressors that lead to employee stress and strain; therefore, it is important that organizations take steps to ensure work life balance and mitigate strain.
Choose an company or an organization, and explain in detail 3-4 measures they are taking to 1) ensure employees maintain work-life balance and 2) minimize work stress.
The correct answer to this open question is the following.
The company I choose is Marsh, an insurance company with branches worldwide.
The measures this company is taking to minimize work stress and ensure employees maintain work-life balance are the following.
1.- The company works by establishing goals. So employees know what they have to do. They can do it in one day or three. The point is that they have a date to have the work finished. So the employee is able to manage its time according to its projects and goals. The company is not strict to force employees to work determined hours a day, as long as employees always finish their projects on time and with results expected. This allows employees to properly manage their time.
2.- The company invites employees to register in fitness centers or recreational clubs so they can attend yoga, aerobics, or dance classes. Of course, the company pays for this. The goal is to have healthier employees that invest time in their health and recreation.
3.- The company authorizes remote work or work from home if that is appropriate for most of the areas of the company. The only requirement is that employees maintain productivity, efficiency, and accomplish the company's goals. This allows employees to be close to their families during difficult times.
Typically you do not have to worry about overdraft fees when you overdraw your bank account. * O True O False
Answer:
that should be false
Explanation:
All of the following are part of an accounting system except:
Answer:
C
Explanation:
its either c or a , the question is not worded right on canvas
5. On the job, Candice coordinates the work of a small group
of people and acts as a catalyst. Her job title is most likely
a. vice president.
b. middle manager.
c. general manager.
d. team leader.
The correct option d. team leader, best describe the role of Candice who coordinates the small group of people.
Define the roles of term team leader and its roles?An professional who directs, teaches, and guides a team of individuals who work as a team is known as a team leader.
This definition states that a team leader must be able to effectively communicate, supervise the work of many others, and resolve any issues that may develop throughout a project. The team leader must ensure that all team members receive the essential information, remove barriers to production, inspire team members, and offer support to the group in order to fulfill their many crucial duties. The job description of a team leader outlines how the leader aids team members in achieving their objectives and adding to the expansion of a business. Team leaders encourage open and productive communication within their workplace and serve as an example to others.To know more about the team leader, here
https://brainly.com/question/25996547
#SPJ1
An analysis of comparative balance sheets, the current year’s income statement, and the general ledger accounts of Wellman Corp. uncovered the following items. Assume all items involve cash unless there is information to the contrary.
Indicate how each item should be classified in the statement of cash flows using these four major classifications: operating activity (indirect method), investing activity, financing activity, and significant noncash investing and financing activity.
(a) Payment of interest on notes payable.
(b) Exchange of land for patent.
(c) Sale of building at book value.
(d) Payment of dividends.
(e) Depreciation.
(f) Receipt of dividends on investment in stock.
(g) Receipt of interest on notes receivable.
(h) Issuance of common stock.
(i) Amortization of patent.
(j) Issuance of bonds for land.
(k) Purchase of land.
(l) Conversion of bonds into common stock.
(m) The loss on the sale of land.
(n) Retirement of bonds.
1. Investing Activity
2. Operating Activity
3. Financing Activity
4. Noncash Investing and Financing Activity
Answer:
(a) Payment of interest on notes payable.
Classification: Operating activity
(b) Exchange of land for patent.
Classification: Non-cash Investing and Financing activity
(c) Sale of building at book value.
Classification: Investing activity
(d) Payment of dividends.
Classification: Financing activity
(e) Depreciation.
Classification: Operating activity
(f) Receipt of dividends on investment in stock.
Classification: Operating activity
(g) Receipt of interest on notes receivable.
Classification: Operating activity
(h) Issuance of common stock.
Classification: Financing activity
(i) Amortization of patent.
Classification: Operating activity
(j) Issuance of bonds for land.
Classification: Non-cash Investing and Financing activity
(k) Purchase of land.
Classification: Investing activity
(l) Conversion of bonds into common stock.
Classification: Non-cash Investing and Financing activity
(m) The loss on the sale of land.
Classification: Operating activity
(n) Retirement of bonds.
Classification: Financing activity
In the Shaping Department of Sheridan Company the unit materials cost is $6.00 and the unit conversion cost is $3.00. The department transferred out 41000 units and had 5400 units in ending work in process 25% complete. If all materials are added at the beginning of the process, the total cost to be assigned to the ending work in process is
Answer:
$36,450
Explanation:
Calculating cost assigned to ending work in process:
Particulars Amount
Material (5,400 units*$6) $32,400
Conversion cost (5,400*25%*$3) $4,050
Total cost of ending work in process $36,450
1. A interest rate that does not change during the life of the loan is a
A. High
B. Variable
C. Fixed
D. Current
2. A interest rate that changes based on the base rate used by the bank
A. Current
B. Fixed
C. High
D. Variable
Answer:
1,C. Fixed
2.D. Variable
Explanation:
A fixed-rate loan has an interest rate that doesn't change throughout the life of the loan. Because the rate remains the same for the entire term, the monthly loan payment shouldn't change, resulting in a relatively low-risk loan. As you compare loan options, note whether or not loans feature fixed rates
.A floating interest rate, also known as a variable or adjustable rate, refers to any type of debt instrument, such as a loan, bond, mortgage, or credit, that does not have a fixed rate of interest over the life of the instrument.
A company uses a legacy on-premises analytics application that operates on gigabytes of .csv files and represents months of data. The legacy application cannot handle the growing size of .csv files. New .csv files are added daily from various data sources to a central on-premises storage location. The company wants to continue to support the legacy application while users learn AWS analytics services. To achieve this, a solutions architect wants to maintain two synchronized copies of all the .csv files on-premises and in Amazon S3.
Which solution should the solutions architect recommend?
A. Deploy AWS DataSync on-premises. Configure DataSync to continuously replicate the .csv files between the company’s on-premises storage and the company’s S3 bucket.
B. Deploy an on-premises file gateway. Configure data sources to write the .csv files to the file gateway. Point the legacy analytics application to the file gateway. The file gateway should replicate the .csv files to Amazon S3.
C. Deploy an on-premises volume gateway. Configure data sources to write the .csv files to the volume gateway. Point the legacy analytics application to the volume gateway. The volume gateway should replicate data to Amazon S3.
D. Deploy AWS DataSync on-premises. Configure DataSync to continuously replicate the .csv files between on-premises and Amazon Elastic File System (Amazon EFS). Enable replication from Amazon EFS to the company’s S3 bucket.
Answer:
The only way the company can achieve this, a solutions architect that will maintain two synchronized copies of all the .csv files on-premises and in Amazon S3 would be through:
C. Deploy an on-premises volume gateway. Configure data sources to write the .csv files to the volume gateway. Point the legacy analytics application to the volume gateway. The volume gateway should replicate data to Amazon S3.
Explanation:
Which of following is true about percentages
Think about people, organizations, agencies, or projects that need help in your neighborhood or city. List them below along with a description of how you can help.
There are several ways to contribute to the development of your neighborhood or city.
You can start researching which social projects and institutions are active in your neighborhood and seek information on ways you can help them.
A simple way to start helping the community with a positive impact is to organize a selective garbage collection and recycling system, so that there is a reduction of polluting waste on the planet and the promotion of good sustainability practices.
You can also help:
work in NGOs, develop tutoring programs for students, create book clubs, support programs for people in needWith small acts and good will, you are able to transform your community into a better place with a better quality of life for everyone who lives in it.
Learn more here:
https://brainly.com/question/20203650