A die is rolled three times and a curious pattern emerges. On the first roll, the number is greater than 3. On the second roll, the under is greater than 4, and on the third roll, the number is greater than 5. If all three rolls are independent, what is the probability that this occurs?

The cone will hold approximately 198 cubic inches of water. The correct answer is option B.

To find how much water a cone with a diameter of 6 inches and a height of 21 inches will hold, we need to calculate the volume of the cone. We can use the formula for the volume of a cone: V = (1/3)πr^2h, where V is the volume, r is the radius, and h is the height.

1. Since the diameter is 6 inches, the radius (r) is half of that: r = 6/2 = 3 inches.

2. The height (h) is given as 21 inches.

3. Use 3.14 for π.

Now, plug the values into the formula:

V = (1/3) * 3.14 * (3^2) * 21

4. Calculate the square of the radius: 3^2 = 9

5. Multiply the values: (1/3) * 3.14 * 9 * 21 ≈ 197.64

6. Round the answer to the nearest whole number: 198 cubic inches.

To learn more about volume

https://brainly.com/question/27710307

#SPJ11

The function that can be used to find the total area is: (x^2 + 25) sq. ft.

A square is a type of quadrilateral which has an equal length of sides. So then its area can be calculated as;

area of a square = length x length

We have from the question that; a square surface that has a side length of x feet. So that;

area of the square surface = length * length

                                            = x * x

                                            = x^2 square feet

But since the contractor always adds 25 square feet to the area, he buys extra paint, then the function required is:

total area = (x^2 + 25) sq. ft.

The function is (x^2 + 25) sq. ft.

Learn more about the area of a square at https://brainly.com/question/24487155

#SPJ1

Answer:

----------------------

In order to find the total area, we need to consider both the area of the square surface and the extra paint he always adds.

Find the area of the square surface:

Add the extra 25 square feet of paint:

Combining these steps, the function is:

The work done by the force field F along the semicircle and the line segment is 32/3.

The work done by a force field F along a curve C from point A to point B is given by the line integral:

W = ∫ F dot dr

where dot represents the dot product and dr is the differential displacement vector along the curve C.

Let's divide the curve C into two parts: the semicircle from P to Q, denoted by C1, and the line segment from Q to P, denoted by C2.

For C1, the curve can be parameterized as x = 2cos(t) and y = 2sin(t) for t in [0, pi]. The differential displacement vector is then given by:

dr = (-2sin(t) dt)i + (2cos(t) dt)j

The force field F(x,y) = x^2i - ryj, so we have:

F(x,y) = (2cos^2(t))i - (2rsin(t))j

The dot product F dot dr is then:

F dot dr = (2cos^2(t))(-2sin(t) dt) + (2rsin(t))(2cos(t) dt)

= -4cos^2(t)sin(t) dt + 4rcos(t)sin(t) dt

= 4sin(t)cos(t)(r - cos(t)) dt

Therefore, the work done along C1 is:

W1 = ∫ C1 F dot dr

= ∫[0, pi] 4sin(t)cos(t)(r - cos(t)) dt

This integral can be evaluated using the substitution u = cos(t), du = -sin(t) dt:

W1 = -∫[1, -1] 4u(r - u) du

= 4r∫[1, -1] u du - 4∫[1, -1] u^2 du

= 0

Hence, the work done along C1 is 0.

For C2, the curve is simply the line segment from Q(-2,0) to P(2,0), which is parallel to the x-axis. Therefore, the differential displacement vector is given by:

dr = dx i

where i is the unit vector in the x-direction. The force field is the same as before, F(x,y) = x^2i - ryj. Along C2, y = 0, so the force field reduces to:

F(x,y) = x^2i

The dot product F dot dr is then:

F dot dr = x^2 dx

Therefore, the work done along C2 is:

W2 = ∫ C2 F dot dr

= ∫[-2, 2] x^2 dx

= 32/3

Hence, the work done along C2 is 32/3.

The total work done along the curve C is the sum of the work done along C1 and C2:

W = W1 + W2 = 0 + 32/3 = 32/3

Therefore, the work done by the force field F along the semicircle and the line segment is 32/3.

To learn more about dot product visit: https://brainly.com/question/29097076

#SPJ11

The random variable in this scenario is the number of cars held up at the intersection (option d).

The data provided in the table shows the number of cars held up at the intersection during specific time intervals, ranging from 12:00 p.m. to 9:00 p.m. Based on this information, it is clear that the random variable in this scenario is the number of cars held up at the intersection.

To put it in mathematical terms, let X be the random variable representing the number of cars held up at the intersection during a specific time interval. The data provided in the table represents a sample of X, with each time interval being a different observation. The values of X can range from 0 to 25, with 17 being the threshold for intervention by a traffic officer.

Therefore, the answer to the question is d. the number of cars held up at the intersection. It is important to note that this random variable is discrete, as it takes on specific integer values.

To know more about random variable here

https://brainly.com/question/17238189

#SPJ4

Answer:

1

Step-by-step explanation:

USE PEMDAS OR ORDER OF OPERATIONS

1. Evaluate parenthesis.

-2/27 - 2/51 = - 52/459.

2. Add

15/51 + 16/27 = 407/459

3. Subtract to get the final answer

407/459 - -52/459 = 407/459 + 52/459 = 1

So, 15/51+16/27-(-2/27-2/51) = 1

The experimental and theoretical probability of the name Fred being chosen is 0.11 and 0.167  respectively.

The question is asking for the experimental and theoretical probabilities of choosing the name Fred when six different names are put into a hat and a name is chosen 100 times.

To find the experimental probability of choosing the name Fred, divide the number of times Fred is chosen by the total number of trials (100 times). In this case, Fred is chosen 11 times.

Experimental probability of choosing Fred = (number of times Fred is chosen) / (total number of trials)
= 11 / 100
= 0.11 or 11%

For the theoretical probability, since there are six different names in the hat and each name has an equal chance of being chosen, the probability of choosing Fred is:

Theoretical probability of choosing Fred = 1 / 6
≈ 0.167 or 16.67%

If the number of names in the hat were different, the theoretical probability would change because the denominator (total number of names) would be different. For example, if there were 5 names instead of 6, the theoretical probability of choosing Fred would be 1/5 or 20%.

The experimental probability would also likely change since the outcomes of the trials would be different with a different number of names.

To know more about probability refer here:

https://brainly.com/question/30034780?#

#SPJ11

The vector parametric equation for the circle C is r(t) = <8cos(t), 8sin(t)> for 0 ≤ t ≤ 2π.

To find a vector parametric equation r(t) for the circle C with radius 8, centered at the origin, starting at the point (8, 0)

and traveling counterclockwise for 0 ≤ t ≤ 2π, follow these steps:

Write down the equation for the circle centered at the origin with radius 8:

x² + y² = 64.

Parametrize the circle using trigonometric functions.

Since we are starting at (8, 0) and going counter clockwise,

we can use x = 8cos(t) and y = 8sin(t).

Write the parametric equation in vector form:

r(t) = <8cos(t), 8sin(t)>.

So the vector parametric equation for the circle C is r(t) = <8cos(t), 8sin(t)> for 0 ≤ t ≤ 2π.

for such more question on vector parametric equation

https://brainly.com/question/12985874

#SPJ11

The value of [tex]c2 – 4mk[/tex] in scenario is[tex]c2 – 0.748[/tex]m and the position of the mass after t seconds is x(t) = [tex]e^(-7t/36) cos(0.433t) + 0.5e^(-7t/36) sin(0.433t)[/tex],which can be written in the general form Great [tex]cos(Bt) + czert sin(8t).[/tex]

The value of c2 – 4mk in this scenario can be found using the equation [tex]c2 – 4mk = c2 – 4mω02[/tex], where ω0 is the natural frequency of the spring. To calculate ω0, we can use the equation[tex]ω0 = sqrt(k/m)[/tex], where k is the spring constant and m is the mass.

Plugging in the given values, we get [tex]ω0 = sqrt(1.5/9) = 0.433[/tex]. Substituting this into the first equation, we get [tex]c2 – 4mk = c2 – 4m(0.433)2 = c2 – 0.748m.[/tex]

Using the given initial condition of the spring being stretched 1 meter beyond its natural length and then released with zero velocity, we can determine that A = 1 and B = 0.5. Plugging in all the values, we get [tex]x(t) = e^(-7t/36) cos(0.433t) + 0.5e^(-7t/36) sin(0.433t).[/tex].

This equation represents the motion of the spring-mass system as it oscillates back and forth around its equilibrium position. The exponential term represents the damping of the system, while the sinusoidal terms represent the oscillation.

Know more about natural frequency here:

https://brainly.com/question/10464574

#SPJ11

Answer:

25

Step-by-step explanation:

let x = the amount of money that shelly has.

let y = the amount of money that john has.

if shelly give john 5 dollars, then they both have the same amount of money.

this leads to the equation:

x-5 = y+5

if john give shelly 5 dollars, then shelly has twice as much money as john has.

this leads to the equation:

x+5 = 2(y-5)

solve for x in each equation to get:

x-5 = y+5 leads to:

x = y+10

x+5 = 2(y-5) leads to:

x+5 = 2y-10 which becomes:

x = 2y-15

you have 2 expressions that are equal to x.

they are:

x = y+10

x = 2y-15

you can set these expressions equal to each other to get:

y+10 = 2y-15

subtract y from both sides of this equation and add 15 to both sides of this equation to get:

y = 25

since x = 2y-15, this leads to:

x = 2(25)-15 which becomes:

x = 35

the equation x = y + 10 leads to the same answer of:

y =35

you have:

x = 25

y = 35

after integrating we get ∫76 cos(29 x) cos(34 x) cos(4x) dx= 1/150 [sin(75x) + 2sin(67x) + 2sin(59x)] + C

Using the identity cos(a)cos(b) = 1/2[cos(a+b) + cos(a-b)], we can rewrite the integrand as:

cos(29x)cos(34x)cos(4x) = 1/2[cos((29+34+4)x) + cos((29+34-4)x)]cos(4x)
= 1/2[cos(67x) + cos(59x)]cos(4x)

Now, using the same identity again, we can further simplify:

cos(67x)cos(4x) = 1/2[cos(71x) + cos(63x)]cos(4x)
cos(59x)cos(4x) = 1/2[cos(63x) + cos(55x)]cos(4x)

Substituting these back into the original integral, we get:

∫76 cos(29x)cos(34x)cos(4x) dx = 1/2 ∫76 [cos(71x) + cos(63x) + cos(63x) + cos(55x)]cos(4x) dx
= 1/2 ∫76 [cos(71x)cos(4x) + cos(63x)cos(4x) + cos(63x)cos(4x) + cos(55x)cos(4x)] dx

Now, using the identity ∫ cos(ax) dx = (1/a)sin(ax) + C, we can easily integrate each term:

1/2 [1/75 sin(75x) + 1/67 sin(67x) + 1/67 sin(67x) + 1/59 sin(59x)] + C

Therefore, the final answer is:

∫76 cos(29x)cos(34x)cos(4x) dx = 1/150 [sin(75x) + 2sin(67x) + 2sin(59x)] + C

To learn more about integral click here

brainly.com/question/18125359

#SPJ11

The two equations with infinite solutions are D 3(x – 1) = 3x – 3 and E2x + 2 = 2(x + 1)

An equation has infinite solutions if we can remove the dependence of the variable, and we end with a true equation.

For example, option D is:

3(x - 1)  =3x - 3

Expanding the left side:

3x - 3 = 3x - 3

Subtract 3x in both sides:

-3 = -3

That is true for any value of x.

The other correct option is E:

2x + 2 = 2(x + 1)

2x + 2 = 2x + 2

2 = 2

Learn more about equations at:

https://brainly.com/question/22688504

#SPJ1

The length of the phone is approximately 6.08 inches, so you can buy a case that fits this size.

To find the length, x, of the phone, we can use trigonometry. We know that the bottom of the phone is 4 inches from the base of the wall, so we can use the tangent function to find the length of the phone.

tangent(52 degrees) = opposite/adjacent

The opposite side is x (the length of the phone) and the adjacent side is 4 inches.

So,

tangent(52 degrees) = x/4

Multiplying both sides by 4, we get:

4 * tangent(52 degrees) = x

Using a calculator, we find that:

x ≈ 6.08 inches

Therefore, the length of the phone is approximately 6.08 inches, so you can buy a case that fits this size.

Learn more about trigonometry,

https://brainly.com/question/13729598

#SPJ11

The family with 8 pets cannot be used to represent the whole because it is an outlier

Given that we have

A dot plot that represents the display

On the dot plot, we have

Outlier = 8

This data value is considered an outlier because it is relatively far from other values

As a general rule, outliers cannot be used to represent the whole

Here, we have

Of the three displays, the bar chart is used to represent data such that users may readily recognize patterns or trends.

So, the bar chart is to be used

Here, we have

Of the three displays, the circle graph does not show that users  patterns or trends.

So, the circle graph is to be used

Read more about graphical representation at

https://brainly.com/question/30370232

#SPJ1

The number of 3-teams is different, and there is at least one 2-team and one 3-team, fulfilling the requirements.

a) To list all different 3-teams that the friends (A, B, C, D, E) could enter, we can find all the possible combinations of choosing 3 friends out of 5. These combinations are:

1. ABC
2. ABD
3. ABE
4. ACD
5. ACE
6. ADE
7. BCD
8. BCE
9. BDE
10. CDE

b) To maximize the number of teams with exactly two 3-teams and at least one 2-team, we can form the following teams:

1. ABC (3-team)
2. ADE (3-team)
3. BC (2-team)

Here, we have formed 1 two-team and 2 three-teams.

c) To maximize the number of teams with exactly three 3-teams and at least one 2-team, we can form the following teams:

1. ABC (3-team)
2. ADE (3-team)
3. BCE (3-team)
4. CD (2-team)

Here, we have formed 1 two-team and 3 three-teams.

d) The friends want to enter 8 teams, including at least one 2-team and at least one 3-team. We can find three ways of doing this with a different number of 3-teams in each case:

1. Two 3-teams: ABC, ADE (3-teams); BC, BD, BE, CD, CE, DE (2-teams)
2. Three 3-teams: ABC, ADE, BCE (3-teams); AC, AD, AE, BD, BE, CD (2-teams)
3. Four 3-teams: ABC, ADE, BCE, BCD (3-teams); AB, AC, AD, AE (2-teams)

In each case, the number of 3-teams is different, and there is at least one 2-team and one 3-team, fulfilling the requirements.

learn more about "Permutation and combination":-https://brainly.com/question/4658834

#SPJ11

The meaning of the intercept of the regression line is option B- When 38. 7 pounds of nitrogen is added to the field, 0. 43 bushels of com are produced

We are given the equation of the experiment that tells a relationship.

y = 0.43x + 28.5

The linear regression line is an algebraic model to show the relationship between the two models by putting the value of one variable to get the value of the other.

A linear regression line can be represented as,

y = Ax + B

Here y is the dependent variable and x is the explanatory variable. A is the slope of the line and

B is the intercept here. In the given equation there are two variables given.

Variable x representsthe amount of nitrogen added, and the variable y represents the number of bushels of corn produced.

As putting the value of x, y increases with the value of number 0.43. Therefore, as we are increasing the value of the nitrogen by one unit, the number of bushels of corn produced is increasing by 0.43 units. Hence, for every 1 pound of nitrogen added to the field, the amount of corn yielded increases by 0.43 bushels.

Therefore option B is the correct option.

To learn more about linear regression;

brainly.com/question/2531169624

#SPJ4

The complete question is "An agricultural scientist collected data to study the relationship between the amount of nitrogen added to a cornfield and the number of

bushels of corn produced. This is the regression line of the data, where y is measured in bushels of corn and x is measured in pounds of

nitrogen.

y = 0.43x + 28.5

What is the meaning of the slope of the regression line?

O A. For every 0.43 pounds of nitrogen added to the field, the amount of corn yielded increases by 28.5 bushels.

OB. For every 1 pound of nitrogen added to the field, the amount of corn yielded increases by 0.43 bushels.

OC. For every 1 pound of nitrogen added to the field, the amount of corn yielded increases by 28.5 bushels.

OD. For every 28.5 pounds of nitrogen added to the field, the amount of corn yielded increases by 0.43 bushels."

The velocity v = ds/dt in terms of t and the position s is: [tex]v = 15t^{(3/2)} - 8t^{(1/2)} + 6[/tex] and [tex]s = 5t^{(5/2)} - 16t^{(3/2)} + 6t + 27[/tex] respectively.

To find the velocity v = ds/dt in terms of t and the position s, we first need to integrate the acceleration equation with respect to time to get the velocity equation:

d²s/dt² = 30 sqrt(t) – 12/ sqrt(t)

Integrating both sides with respect to t, we get:

ds/dt = 30/2 * t^(3/2) - 12 * 2/3 * t^(1/2) + C₁

where C₁ is the constant of integration.

Using the condition ds/dt = 12 when t = 1, we can solve for C₁:

12 = 30/2 * 1^(3/2) - 12 * 2/3 * 1^(1/2) + C₁

C₁ = 6

Substituting this value of C₁ back into the velocity equation, we get:

ds/dt = 15t^(3/2) - 8t^(1/2) + 6

Now, we can integrate the velocity equation to get the position equation:

s = 5t^(5/2) - 16t^(3/2) + 6t + C₂

where C₂ is the constant of integration.

Using the condition s = 16 when t = 1, we can solve for C₂:

16 = 51^(5/2) - 161^(3/2) + 6*1 + C₂

C₂ = 27

Substituting this value of C₂ back into the position equation, we get:

s = 5t^(5/2) - 16t^(3/2) + 6t + 27

Therefore, the velocity v = ds/dt in terms of t and the position s is: v = 15t^(3/2) - 8t^(1/2) + 6 and s = 5t^(5/2) - 16t^(3/2) + 6t + 27 respectively.

To learn more about velocity visit: https://brainly.com/question/17127206

#SPJ11

The human heart beats approximately 4.1975 x 10⁸ times in one year and it expressed in scientific notation.

According to the question, the average human heart beats 1.15 x 10⁵ times a day. We need to find out how many times the heart beats in one year, which is 3.65 x 10² days.

To calculate the total number of heartbeats in one year, we can multiply the number of heartbeats in a day by the number of days in a year. Therefore, we have:

Total number of heartbeats in one year = 1.15 x 10⁵ beats/day x 3.65 x 10² days/year

= (1.15 x 3.65) x (10⁵ x 10²) beats/year

= 4.1975 x 10⁸ beats/year

This number may seem large, but it is necessary for the heart to pump blood throughout the body to keep us alive and healthy.

To know more about scientific notation here

https://brainly.com/question/18073768

#SPJ4

If An oil globe made of hand-blown glass of a diameter of 22.6. Therefore, the volume of the oil globe is approximately 5704.8 cm^3.

The volume of a spherical object can be calculated using the formula:

V = (4/3)πr^3

where V is the volume, π is the mathematical constant pi (approximately equal to 3.14159), and r is the radius of the sphere.

In this case, we are given the diameter of the oil globe, which is 22.6. The radius is half of the diameter, so we can calculate the radius as:

r = d/2 = 22.6/2 = 11.3 cm

Substituting this value of radius in the formula for the volume of a sphere, we get:

V = (4/3)π(11.3)^3

V = 5704.8 cm^3 (rounded to one decimal place)

Therefore, the volume of the oil globe is approximately 5704.8 cm^3.

To learn more about “diameter” refer to the https://brainly.com/question/10907234

#SPJ11

Both ratios provided by Heather and Allen are correct, they are just inverse.

Heather says that the ratio of bass and violins to cellos is 10 to 5. Allen says the ratio of cellos to bass and violins is 1 to 2. To determine who is correct, let's compare the ratios.

1: Simplify Heather's ratio.

Heather's ratio is 10:5, which can be simplified by dividing both sides by 5. This gives a simplified ratio of 2:1 (bass and violins to cellos).

2: Compare the simplified ratios.

Heather's simplified ratio is 2:1, which represents the ratio of bass and violins to cellos. Allen's ratio is 1:2, which represents the ratio of cellos to bass and violins.

3: Analyze the results.

Heather's ratio (2:1) and Allen's ratio (1:2) are inverses of each other. Both ratios are correct, but they represent different perspectives: Heather is expressing the ratio of bass and violins to cellos, while Allen is expressing the ratio of cellos to bass and violins.

Learn more about Ratio:

https://brainly.com/question/2914376

#SPJ11

The Volume and the surface area of the given figure are 87 in³ and 83 in²  

To find the volume of the figure, we need to split it into smaller rectangular parts and find the volume of each part separately. From the given measurements, we can see that the figure consists of three rectangular parts:

The volume of each part can be found using the formula:

Volume = length x width x height

Part 1: A rectangular prism with dimensions 3 in x 3 in x 1 in

Volume = 3 in x 3 in x 1 in

Volume = 9 in³

Part 2: A rectangular prism with dimensions 1 in x 6 in x 7 in

Volume = 1 in x 6 in x 7 in

Volume = 42 in³

Part 3: A rectangular prism with dimensions 6 in x 6 in x 1 in

Volume = 6 in x 6 in x 1 in

Volume = 36 in³

Total Volume:

The total volume of the piecewise rectangular figure is the sum of the volumes of each part:

Total Volume = Volume of Part 1 + Volume of Part 2 + Volume of Part 3

= 9 in³ + 42 in³ + 36 in³

= 87 in³

To find the surface area of the figure, we need to find the area of each face and add them up. The figure has 6 rectangular faces, and the area of each face can be found using the formula:

Area = length x width

Part 1:

Top and Bottom faces:

Area = 3 in x 3 in

Area = 9 in²

Side faces:

Area = 3 in x 1 in

Area = 3 in² (x2)

Total Area of Part 1:

Total Area = 9 in² + (3 in² x 2)

= 15 in²

Part 2:

Top and Bottom faces:

Area = 1 in x 6 in

Area = 6 in²

Side faces:

Area = 1 in x 7 in

Area = 7 in² (x2)

Total Area of Part 2:

Total Area = 6 in² + (7 in² x 2)

= 20 in²

Part 3:

Top and Bottom faces:

Area = 6 in x 6 in

Area = 36 in²

Side faces:

Area = 6 in x 1 in

Area = 6 in² (x2)

Total Area of Part 3:

Total Area = 36 in² + (6 in² x 2)

= 48 in²

Total Surface Area:

The total surface area of the figure is the sum of the areas of all its faces:

Total Surface Area = Total Area of Part 1 + Total Area of Part 2 + Total Area of Part 3

= 15 in² + 20 in² + 48 in²

= 83 in²

The Volume and the surface area of the given figure are 87 in³ and 83 in²

To know more about surface area here

https://brainly.com/question/27784309

#SPJ1

The inequalities for which the ordered pair (-1,-9) is a solution are a and b

From the question, we have the following parameters that can be used in our computation:

The inequality expression y> -5/4x-3 and the list of options

To determine the ordered pairs of the inequality expression, we set x = -1 and then calculate the value of y

Using the above as a guide, we have the following:

y > -5/4(-1) -3

Evauate

y > -1.75 -- this is false because -9 < -1.75

For the list of options, we have

Graph (a) True

Graph (b) True

Hence, the inequalities for which the ordered pair (-1,-9) is a solution are a and b

Read more about inequality at

https://brainly.com/question/25275758

#SPJ1

The calculated value of x in the circle is 12.3

From the question, we have the following parameters that can be used in our computation:

The circle

∠QRS = 7x - 21

QS = 130

Using the theorem of intersecting chords, we have the following equation

∠QRS = 1/2 * QS

Substitute the known values in the above equation, so, we have the following representation

7x - 21 = 1/2 * 130

Evaluate

7x - 21 = 65

Evaluate the like terms

7x = 86

Divide by 7

x = 12.3

Hence, the value of x in the circle is 12.3

Read more about circles at

https://brainly.com/question/25871159

#SPJ1

Answer:

423.9

Step-by-step explanation:

To solve this problem you need to use the formula for surface area. This formula can either be used with the radius or the diameter. I prefer using diameter because it is easier to remember and it is easier to calculate. The formula writes as follows: [tex]SA=d\pi h+d\pi ^{2}\\\\[/tex]. To use this formula all we have to do is insert the values into the formula and solve.

[tex]SA=d\pi h+d\pi ^{2}\\\\SA=(9)\pi(6)+\pi(9) ^{2}\\\\SA=54\pi+81\pi\\\\SA=54\pi+81\pi\\\\SA=135\pi\\\\SA=423.9[/tex]

423.9 is our answer.

The triangle has two sides with equal lengths (AB and AC) and one side with a different length (BC). This makes it an isosceles triangle.

Triangle ABC has vertices A(0,0), B(0,3), and C(3,0).

To determine the type of triangle, we can find the lengths of the sides using the distance formula:

AB = sqrt((0-0)^2 + (3-0)^2) = sqrt(0 + 9) = 3

BC = sqrt((3-0)^2 + (0-3)^2) = sqrt(9 + 9) = sqrt(18) = 3√2

AC = sqrt((3-0)^2 + (0-0)^2) = sqrt(9 + 0) = 3

The triangle has two sides with equal lengths (AB and AC) and one side with a different length (BC). This makes it an isosceles triangle.

Read more about triangles here:

https://brainly.com/question/1058720

#SPJ1

The missing side length of the rectangle is 7.75 inches when x is equal to 3. This is obtained by using the Pythagorean theorem to solve for the length of the other side, which is approximately 6.3 inches.

Using the Pythagorean theorem, we can find the missing side length of the rectangle

a² + b² = c²

where c is the length of the diagonal and a and b are the lengths of the sides.

Plugging in the values given, we get

(2x)² + b² = (8x)²

4x² + b² = 64x²

b² = 60x²

b = √(60x²) = √(60)x

When x = 3, the missing side length is

b = √(60)(3) = 7.75 in. (rounded to the nearest tenth of an inch)

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ4

--The given question is incomplete, the complete question is given

"Find an equivalent expression for the missing side length of the rectangle.

then find the missing side length when x = 3. round to the nearest tenth of an inch.

8x in. is a diagonal of rectangle

2x in. is one side of rectangle

? in. is other side at base "--

30 km far has the athlete run.

A rectangle may be a geometric shape that is characterized by its four sides, where opposite sides are parallel and break even within the length. It has four sides the longer side is named length and the shorter side is named as breadth.

An Athlete runs around a rectangular field = 10 times

The Length of the rectangle = [tex]1.08 km[/tex]

The Breadth of the rectangle = [tex]0.42 km[/tex]

 [tex]1km = 1000 m\\= 420 /1000 m\\= 0.42 km[/tex]

Therefore, perimeter of the rectangle = 2 (length + breadth)

                                                              =  [tex]2 ( 1.08 + 0.42)[/tex]

                                                              = [tex]2 (1. 50)[/tex]

                                                              = [tex]3 km[/tex]

So, the athlete runs around a rectangular housing 10 times = [tex]3[/tex]×[tex]10[/tex]

                                                                                                   = [tex]30 km[/tex]

Therefore, the athlete runs 30 km far.

To learn more about rectangle,

https://brainly.com/question/15019502      

The length of SQ in triangle QRS is approximately 19.8 feet to the nearest tenth of a foot.

To find the length of SQ in triangle QRS, where angle S = 90°, angle Q = 6°, and RS = 20 feet, we can use the sine function. Here's a step-by-step explanation:

1. Identify the given information: In triangle QRS, we have angle S = 90°, angle Q = 6°, and side RS = 20 feet.

2. Since the sum of angles in a triangle is always 180°, we can find angle R: angle R = 180° - angle S - angle Q = 180° - 90° - 6° = 84°.

3. Now we can use the sine function to find the length of side SQ. Since we know angle R and side RS, we can use the sine of angle R to relate side SQ to side RS:

[tex]sin(angle R) = \frac{opposite side (SQ)}{ hypotenuse side (RS)}[/tex]
[tex]sin(84°) =\frac{SQ}{20 feet}[/tex]

4. Solve for SQ: [tex]SQ = (20 feet)  sin(84°) = 19.8 feet.[/tex].

So, the length of SQ in triangle QRS is approximately 19.8 feet to the nearest tenth of a foot.

To know more about "Sine function" refer here:

https://brainly.com/question/9856110#

#SPJ11

Experimental probability of landing on blue = 1/12 and experimental probability and theoretical probability are not close.

1.

To find the experimental probability of landing on blue, we need to divide the number of times it landed on blue by the total number of spins.

Experimental probability of landing on blue = Number of times landed on blue / Total number of spins

Here, the spinner was spun 12 times and landed on blue 1 time.

Experimental probability of landing on blue = 1/12

2.

The theoretical probability of landing on blue is the ratio of the number of blue spaces to the total number of spaces on the spinner. Since there is only one blue space out of four total spaces, the theoretical probability is 1/4 or 0.25.

The experimental probability = 1/12 = 0.083

So, the experimental probability and theoretical probability are not close.

A possible reason for the discrepancy is likely due to the small sample size of spins. With a larger number of spins, the experimental probability should converge closer to the theoretical probability. This is known as the law of large numbers in probability theory.

To learn more about probability : https://brainly.com/question/13604758

#SPJ11

The solution of initial value problem, y = 9/t - 1, t ≠ 0.

We can begin by rearranging the equation and separating the variables:

t^2 dy/dt - yt = t + 1

dy/(y+1) = (t+1)/t^2 dt

Integrating both sides, we get:

ln|y+1| = -1/t + t/t + C

ln|y+1| = -1/t + C

|y+1| = e^C /t

Using the initial condition y(1) = 8, we can find the value of C:

|8+1| = e^C /1

e^C = 9

C = ln 9

Substituting back into the general solution, we have:

|y+1| = 9/t

We can now solve for y in terms of t:

y+1 = ±9/t

If we take the positive sign, we get:

y = 9/t - 1

If we take the negative sign, we get:

y = -9/t - 1

Thus, the general solution to the initial value problem is:

y = 9/t - 1 or y = -9/t - 1

Using the initial condition y(1) = 8, we can see that the correct solution is:

y = 9/t - 1

To know more about initial value problem, here

brainly.com/question/30466085

#SPJ4