A gas has a pressure of 801. 3Kpa at 40. 0°C. What is the temperature at 101. 3 kPa?



Please I just want the answer (number) no link pleaseee

Answer:

[tex]\huge\boxed{\sf T_2=100.3 \ K}[/tex]

Explanation:

Volume 1 = [tex]V_1[/tex] = 3.00 L

Volume 2 = [tex]V_2[/tex] = 1.00 L

Temperature 1 = [tex]T_1[/tex] = 28 °C + 273 = 301 K

Temperature 2 = [tex]T_2[/tex] = ?

[tex]\displaystyle \frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex] (Charles Law)

Put the given data in the above formula.

[tex]\displaystyle \frac{3.00}{301} = \frac{1.00}{T_2} \\\\Cross \ Multiply\\\\3 \times T_2=301 \times 1\\\\3T_2= 301\\\\Divide \ both \ sides \ by \ 3\\\\T_2=301/3\\\\T_2=100.3 \ K\\\\\rule[225]{225}{2}[/tex]

To solve this problem, we first need to write and balance the chemical equation for the reaction between strontium chloride and sulfuric acid:

SrCl2 + H2SO4 → SrSO4 + 2HCl

According to the balanced chemical equation, one mole of strontium chloride reacts with one mole of sulfuric acid to produce one mole of strontium sulfate and two moles of hydrochloric acid.

Next, we need to calculate the number of moles of sulfuric acid we have:

moles of H2SO4 = mass of H2SO4 / molar mass of H2SO4

moles of H2SO4 = 300.0 g / 98.08 g/mol

moles of H2SO4 = 3.057 mol

Finally, we can use the stoichiometry of the balanced chemical equation to determine the number of moles of strontium chloride that will react with 3.057 moles of sulfuric acid:

moles of SrCl2 = moles of H2SO4

moles of SrCl2 = 3.057 mol

Now we can calculate the mass of strontium chloride using its molar mass:

mass of SrCl2 = moles of SrCl2 x molar mass of SrCl2

mass of SrCl2 = 3.057 mol x 158.53 g/mol

mass of SrCl2 = 485.1 g

Therefore, 485.1 grams of strontium chloride will react with 300.0 grams of sulfuric acid.

Explanation:

To solve this problem, we use stoichiometry, which is a method that relates the amount of reactants and products in a chemical reaction based on their balanced chemical equation. In this case, we first write and balance the chemical equation for the reaction between strontium chloride and sulfuric acid. Then, we calculate the number of moles of sulfuric acid given its mass and molar mass. Next, we use the stoichiometry of the balanced chemical equation to determine the number of ontium chloride that will react with the given amount of sulfuric acid. Finally, we calculate the mass of strontium chloride using its molar mass and the calculated number of moles. By following these steps, we can determine the mass of strontium chloride that will react with 300.0 grams of sulfuric acid.

The pressure of the Hydrogen gas sample is approximately 29.4 atm.

To find the pressure of the 4.25 moles of Hydrogen gas at 20.0°C and occupying a volume of 25.0 L, we can use the ideal gas law formula: PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant (8.314 J/mol·K), and T is the temperature in Kelvin.

First, convert the temperature to Kelvin: 20.0°C + 273.15 = 293.15 K.

Now, rearrange the formula to solve for pressure: P = nRT/V

Substitute the values: P = (4.25 moles) × (8.314 J/mol·K) × (293.15 K) / (25.0 L)

Calculate the pressure: P ≈ 3921.2 J/L

Since 1 J/L = 0.00750062 atm, convert the pressure to atm: P ≈ 3921.2 J/L × 0.00750062 atm/J·L ≈ 29.4 atm

So, the pressure of the Hydrogen gas sample is approximately 29.4 atm.

To learn more about hydrogen, refer below:

https://brainly.com/question/28937951

#SPJ11

The mass of the zinc hydroxide that we need for the reaction is about  21.8 g.

The equation of a reaction is a chemical equation that represents the chemical change that occurs during a chemical reaction. It is typically written in the form:

Reactants → Products

where the reactants are the starting materials and the products are the substances that are formed as a result of the reaction.

The equation of the reaction is;

Zn(OH)2 + H2SO4 → ZnSO4 + 2H2O

Number of moles of H2SO4 = 21.1 g/98 g/mol

= 0.22 moles

If the reaction is 1:1,

Mass of the Zn(OH)2 required = 0.22 moles * 99 g/mol

= 21.8 g

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

The pH of the resulting solution is about 0.33.

To determine the pH of the resulting solution when 50.0 mL of 0.75 M HI solution is added to 0.027 L of a 0.05 M KOH solution, we first need to find the moles of each reactant and then determine the concentration of the remaining ions.

1. Calculate moles of HI:
Volume (L) = 50.0 mL × (1 L / 1000 mL) = 0.050 L
Moles of HI = Volume (L) × Molarity = 0.050 L × 0.75 M = 0.0375 mol

2. Calculate moles of KOH:
Moles of KOH = Volume (L) × Molarity = 0.027 L × 0.05 M = 0.00135 mol

3. Determine the limiting reactant and the amount of remaining ions:
Since HI is a strong acid and KOH is a strong base, they will react completely in a 1:1 ratio. KOH is the limiting reactant, and there will be a remaining amount of HI.

Moles of remaining HI = Moles of HI - Moles of KOH = 0.0375 mol - 0.00135 mol = 0.03615 mol

4. Calculate the concentration of remaining H+ ions:
Total volume of the solution = 0.050 L (HI) + 0.027 L (KOH) = 0.077 L
Concentration of H+ ions = Moles of remaining HI / Total volume = 0.03615 mol / 0.077 L = 0.469 M

5. Determine the pH of the solution:
pH = -log10([H+]) = -log10(0.469) ≈ 0.33

The pH of the resulting solution is approximately 0.33.

To learn more about concentration, refer below:

https://brainly.com/question/10725862

#SPJ11

71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.

When 25.0 grams of oxygen reacts, the amount of NO2 produced can be determined by using stoichiometry. The balanced chemical equation for the reaction is:

2 NO + O2 → 2 NO2

From the equation, it can be seen that for every one mole of O2, two moles of NO2 are produced. Therefore, the first step is to convert the given mass of oxygen into moles. The molar mass of oxygen is 32 g/mol, so:

25.0 g O2 ÷ 32 g/mol = 0.78125 mol O2

Since the stoichiometry of the reaction shows that two moles of NO2 are produced for every one mole of O2, the next step is to calculate the number of moles of NO2 produced:

0.78125 mol O2 × 2 mol NO2/1 mol O2 = 1.5625 mol NO2

Finally, the mass of NO2 can be calculated by multiplying the number of moles of NO2 by its molar mass, which is 46 g/mol:

1.5625 mol NO2 × 46 g/mol = 71.875 g NO2

Therefore, 71.875 grams of NO2 can be produced when 25.0 g of oxygen reacts in this reaction.

To know more about oxygen, visit:

https://brainly.com/question/13370320#

#SPJ11

An exothermic reaction is spontaneous if the overall Gibbs free energy change (ΔG) is negative, indicating that the reaction is energetically favorable and will proceed without an external energy input. However, an exothermic reaction can become non-spontaneous under certain circumstances.

One such circumstance is when the entropy change (ΔS) is negative. If ΔH is negative (exothermic) but ΔS is also negative (decrease in disorder), the value of ΔG could still be positive (non-spontaneous) or close to zero (at equilibrium) at temperatures where ΔH is not sufficiently large to overcome the negative ΔS.

This means that even though energy is released during the reaction, the decrease in disorder can make the reaction unfavorable.

Another circumstance is when the reactants are in a highly ordered or low-energy state, and the products are in a highly disordered or high-energy state. In such cases, the enthalpy change (ΔH) may be negative (exothermic), but the entropy change (ΔS) is also positive, and the resulting ΔG value may still be positive, making the reaction non-spontaneous.

To know more about exothermic reaction refer to-

https://brainly.com/question/10373907

#SPJ11

17.43 grams of NH₃ will produce 34.39 liters of water.

The balanced chemical equation is 4 NH₃ + 5O₂ → 4NO + 6H₂O. From the equation, we can see that for every 4 moles of NH₃ reacted, 6 moles of water are produced.

Therefore, to determine the number of moles of water produced, we need to convert the mass of NH₃ given to moles. The molar mass of NH₃ is 17.03 g/mol, so:

17.43 g NH₃ × (1 mol NH₃/17.03 g NH₃) = 1.023 mol NH₃

Using stoichiometry, we can calculate the number of moles of water produced:

1.023 mol NH₃ × (6 mol H₂O/4 mol NH₃) = 1.5345 mol H₂O

Finally, we can convert the number of moles of water to liters using the fact that 1 mole of any gas at standard temperature and pressure (STP) occupies 22.4 L:

1.5345 mol H₂O × (22.4 L/mol) = 34.39 L

To know more about chemical equation, refer here:

https://brainly.com/question/19626681#

#SPJ11

Answer: d. 97.99g/mol

Explanation:

We need to add the molar mass of each of the atoms from the formula:

H3PO4 has 3x H atoms, 1x P atom, and 4x O atoms

H 3x 1.0079= 3.0237g/mol

P 1x 30.974= 30.974g/mol

O 4x 15.999= 63.996g/mol

now add all of the totals for each type of atom

3.0237 + 30.974 + 63.996= 97.9937g/mol

our answer is d. 97.99g/mol

The least effective choice of color would be green color. Hence option a is correct.

The plants absorb all different wavelength lights of the visible light spectra but the only color that is not absorbed and reflected back is green color light.

The principal pigment in photosynthesis, chlorophyll, reflects green light and significantly absorbs red and blue light. Chloroplasts, which house the chlorophyll in plants, are where photosynthesis occurs.

The plant's green colour is a reflection of the green light. Violet and orange (chlorophyll a) and blue and yellow (chlorophyll b) are the colours that are most readily absorbed. Therefore, green colour light would be least effective for the production of sugar and fruit in this tomato plant.

To know about chlorophyll

https://brainly.com/question/29853003

#SPJ4

Paleontologists use a variety of methods to determine the placement of a fossil for display. One important factor is the diagnostic structure of the fossil, which refers to unique features that help to identify the species and its evolutionary relationships. For example, if a fossil has a particular shape or pattern on its shell, this could indicate a specific genus or species.

To accurately place a fossil for display, paleontologists will carefully examine its diagnostic structures and compare them to other specimens in their collection or in published research. They may also consult with experts in the field or use advanced imaging techniques to better understand the fossil's characteristics.

Once the paleontologists have identified the species and determined its placement, they can design a display that showcases the fossil in a way that is both educational and visually appealing. This may involve creating a custom mount or exhibit case, selecting appropriate lighting and text labels, and considering the context in which the fossil was found.

Overall, the accurate placement of a fossil for display is crucial for conveying its scientific significance to the public and helping people to better understand the history of life on Earth. By using diagnostic structure as a key tool in this process, paleontologists can ensure that the fossils are correctly identified and presented in a way that is both informative and engaging.

To know more about Paleontologists   refer here

https://brainly.com/question/11805817#

#SPJ11

The natural process being modeled here is "Chemical weathering". The correct answer is option c.

Chemical weathering is the process by which rocks and minerals are broken down through chemical reactions with water, air, and other substances.

In this case, the clay is being broken down by the water, which is dissolving some of the minerals in the clay and carrying them away. As the water evaporates, the minerals are left behind, forming small pebbles and other components.

This process may occur over a long period of time, depending on the type of clay and the amount of water present. Chemical weathering is an important part of the Earth's natural processes, as it helps to shape the landscape and produce new materials that can be used for building and other purposes.

The correct answer is option c.

To know more about Chemical weathering refer to-

https://brainly.com/question/29616084

#SPJ11

The jetstream is a high-altitude, fast-moving air current that can impact weather patterns across large areas.

In the winter, changes in the jetstream can affect the amount and type of precipitation, as well as the temperature. For example, if the jetstream shifts southward, bringing colder air from the Arctic, your town may experience colder than average temperatures and more snowfall.

Alternatively, if the jetstream stays north, your town may experience milder temperatures and less precipitation. Overall, the jetstream can have a significant impact on the winter weather in your town, and it's important to keep an eye on its movements to prepare for any potential weather changes.

To know more about air current click on below link:

https://brainly.com/question/13653784#

#SPJ11

The pH of the solution after the addition of 60 mL of titrant (HCl) is 8.5. This is because when the titrant is added, the reaction between NH3 and HCl takes place, forming NH4Cl, which is an acidic species.

pH is a measure of the acidity or alkalinity of a solution. It is measured on a scale from 0-14, with 7 being neutral. A pH below 7 is considered acidic, while a pH above 7 is considered basic or alkaline. Solutions with a pH less than 7 are said to be acidic, and solutions with a pH greater than 7 are said to be basic. pH is an important parameter in many chemical and biological processes, as it can affect the solubility, reactivity, and stability of the molecules in a solution.

The pH of the solution after the of 90 mL of titrant (HCl) is 6.5. This is because the reaction between NH3 and HCl continues until all of the NH3 is consumed, and the pH of the solution continues to decrease as the amount of HCl increases.

To learn more about pH

https://brainly.com/question/172153

#SPJ4

The Ksp of a substance is the equilibrium constant for the reaction between the dissolved ions and the undissolved solid. In this case, the equation is M₂+(aq) + 2OH-(aq) ↔ M(OH)₂(s).

Knowing the volume of HCl required for the titration (25.10 mL) and the molarity of the HCl (0.173 M), the concentration of M₂+ and OH- ions in the saturated solution can be calculated. The Ksp can then be calculated using the concentration of M₂+ and OH- ions in the solution.

The Ksp can be expressed as Ksp = [M₂+][OH]⁻². To calculate the Ksp, the molarity of the HCl solution is multiplied by the volume used in the titration (25.10 mL) to get the moles of HCl used (4.35 x 10⁻³mol). This number is then divided by the volume of the saturated solution (28.5 mL) to get the concentration of M₂+ (1.53 x 10-2 M) and OH- (3.06 x 10⁻² M).

Finally, the Ksp can be calculated using the concentrations of M₂+ and OH- ions: Ksp = [1.53 x 10⁻²][3.06 x 10⁻²]2 = 4.94 x 10⁻⁵. Thus, the Ksp for this alkaline earth hydroxide is 4.94 x 10-5.

Know more about Equilibrium constant  here

https://brainly.com/question/10038290#

#SPJ11

According to the question 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.

STP (Standard Temperature and Pressure) is an important concept in the physical sciences. It is the reference state for temperature and pressure in which most measurements are made. In chemistry, STP is used as a reference state for calculating the physical properties of various substances. It is also used in thermodynamics to calculate the physical state of a system. STP is defined as 0 °C (273.15 K) and a pressure of 1 atmosphere (101.325 kPa).

According to the balanced equation, for every 6 moles of NO, 5 moles of NH3 is required. Therefore, we need to calculate the number of moles of NO first.

1 mole of gas at STP occupies 22. 4 liters, so 30.0 liters of NO at STP is equal to 30.0/22.4 = 1.34 moles of NO.

Since we need 5 moles of NH3 for every 6 moles of NO, we need 5/6 x 1.34 = 1.12 moles of NH3.

At 32.6°C and 4.25 kPa, 1 mole of NH3 occupies 17.1 liters, so 1.12 moles of NH3 is equal to 1.12 x 17.1 = 19.2 liters of NH3.

Therefore, 19.2 liters of NH3 at 32.6°C and 4.25 kPa is required to react completely with 30.0L of NO at STP.

To learn more about STP

https://brainly.com/question/27100414

#SPJ4

Approximately 148.8 g of KNO₃ is needed to create a saturated solution at 60°C in 240.0 mL of distilled water.

The mass of KNO₃ needed to create a saturated solution at 60°C in 240.0 mL of distilled water depends on the solubility of KNO₃ at that temperature.

The solubility of KNO₃ in water increases with temperature. At 60°C, the solubility of KNO₃ is approximately 62 g per 100 mL of water.

Thus, the quantity of KNO₃ required to form a saturated solution in 240.0 mL of water can be determined using the following procedure.:

Mass of KNO₃ = (62 g/100 mL) x (240.0 mL) = 148.8 g

To know more about price solubility, refer here:

https://brainly.com/question/17647006#

#SPJ11

175.17 grams of CaCO₃ are produced when 98.2 grams of CaO are reacted with an excess of CO₂ according to the given equation.

To solve this problem, we need to use stoichiometry which deals with the quantitative relationships between reactants and products in chemical reactions.

The balanced chemical equation for the reaction is:

CaO + CO₂ → CaCO₃

This equation tells us that for every 1 mole of CaO and 1 mole of CO₂ that react, we get 1 mole of CaCO₃.

We are given the mass of CaO that is used in the reaction. To calculate the mass of CaCO₃ that is produced, we need to use stoichiometry and the molar mass of CaCO₃.

The molar mass of CaCO₃ is the sum of the atomic masses of one calcium atom (Ca), one carbon atom (C), and three oxygen atoms (O). Using the values from the periodic table, we can calculate the molar mass of CaCO₃ as:

molar mass of CaCO₃ = 1 × atomic mass of Ca + 1 × atomic mass of C + 3 × atomic mass of O

                                    = 1 × 40.08 g/mol + 1 × 12.01 g/mol + 3 × 16.00 g/mol

                                    = 100.09 g/mol

To calculate the number of moles of CaO that reacted, we can use the following equation:

n = m/M

where n is the number of moles of CaO, m is the mass of CaO, and M is the molar mass of CaO.

Using the given values, we get:

n = 98.2 g / 56.08 g/mol = 1.749 mol

This is the number of moles of CaO that reacted in the reaction.

Since the reaction is 1:1, meaning that one mole of CaO reacts with one mole of CO₂ to produce one mole of CaCO₃, we know that the number of moles of CaCO₃ produced is also 1.749 mol.

Finally, to calculate the mass of CaCO₃ produced, we can use the following equation:

m = n × M

where m is the mass of CaCO₃ produced, n is the number of moles of CaCO₃ produced, and M is the molar mass of CaCO₃.

Using the given values, we get:

m = 1.749 mol × 100.09 g/mol = 175.17 g

Learn more about CaCO₃ at https://brainly.com/question/30594488.

#SPJ11

The metal spoon is hotter than the wooden spoon due to its higher mass,

Heat is the energy transferred from one body to another due to a temperature difference. The amount of heat transferred is proportional to the mass of the object and its specific heat capacity. Specific heat capacity is the amount of heat required to raise the temperature of one unit mass of the substance by one degree Celsius.

In this scenario, the two spoons are of equal size, but the metal spoon has a higher mass and specific heat capacity compared to the wooden spoon. When both spoons are placed in the boiling water, heat flows from the water to the spoons until they reach the same temperature as the water.

However, due to the higher mass and specific heat capacity of the metal spoon, it requires more heat energy to raise its temperature compared to the wooden spoon. As a result, the metal spoon takes a longer time to reach the same temperature as the wooden spoon.

Additionally, metals are better conductors of heat compared to wood. Therefore, the metal spoon conducts the heat more efficiently from the boiling water to the handle, making it hotter than the wooden spoon.

Overall, the metal spoon is hotter than the wooden spoon due to its higher mass, higher specific heat capacity, and better heat conduction properties. This is why it would be more painful to grab.

The number of moles of hydrogen gas needed is 0.213 moles, under the condition that their is a necessity of reacting 15.1g of chlorine gas to produce hydrogen chloride gas.


Here the balanced chemical equation for the reaction  regarding hydrogen gas and chlorine gas in the process of producing hydrogen chloride gas is
H₂(g) + Cl₂(g) → 2HCl(g)

The given molar mass of chlorine gas is 70.9 g/mol.
Now to evaluate the number of moles of chlorine gas in 15.1 g of chlorine gas,
We need to divide the mass by the molar mass

Number of moles of chlorine gas = Mass of chlorine gas / Molar mass of chlorine gas
= 15.1 g / 70.9 g/mol
= 0.213 mol

Then, from the balanced chemical equation, we can interpret that 1 mole of hydrogen gas reacts with 1 mole of chlorine gas to produce 2 moles of hydrogen chloride gas.
Hence, to calculate the number of moles of hydrogen gas required to react with 15.1 g of chlorine gas,

1 mol H₂ / 1 mol Cl₂ = x mol H₂ / 0.213 mol Cl₂

Evaluating for x,
x = (1 mol H₂ / 1 mol Cl₂) × (0.213 mol Cl₂)
= 0.213 mol H₂
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4

A solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂0 at 25°C. Compared to the boiling point and freezing point of 100 grams of H₂0 at standard pressure, the solution at standard pressure has a lower boiling point and a higher freezing point. The correct option is A.

When a solute, such as NaCl, is dissolved in a solvent, such as water, the boiling point of the solution is raised and the freezing point is lowered. This phenomenon is known as boiling point elevation and freezing point depression.

The extent of the change in boiling point and freezing point depends on the concentration of the solute in the solution. In this case, the solution consists of 2.50 moles of NaCl dissolved in 100 grams of H₂O. This concentration of NaCl will cause the solution to have a lower boiling point and a higher freezing point compared to pure water.

The reason is that the NaCl molecules dissociate into ions when dissolved in water, which increases the number of particles in the solution and lowers the vapor pressure, making it more difficult for the solution to boil. Additionally, the presence of the solute disrupts the formation of crystal lattice structures in the solvent, causing a decrease in the freezing point. Hence, option A is correct.

To know more about solute, refer here:

https://brainly.com/question/13812915#

#SPJ11

The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The chemical equation for the reaction between Na2CO3 (aq) and NaCl2 (aq) is as follows:

2 Na2CO3 (aq) + NaCl2 (aq) → 2 NaCl (aq) + CO2 (g) + H2O (l).

In this reaction, sodium carbonate (Na2CO3) reacts with sodium chloride (NaCl2) to form sodium chloride (NaCl), carbon dioxide (CO2) and water (H2O). The reaction is a double displacement reaction, in which two ions switch places in the reactants to form the products. The sodium ions in the Na2CO3 react with the chloride ions in the NaCl2 to form the NaCl, while the carbonate ions in the Na2CO3 react with the sodium ions in the NaCl2 to form CO2 and H2O.

The reaction does not form a precipitate, so no solid product is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.

Overall, this reaction between Na2CO3 and NaCl2 results in the formation of NaCl, CO2 and H2O, and no solid precipitate is formed. This is because both the reactants and products are soluble in water, and so no solid product is formed.

Know more about chemical equation here

https://brainly.com/question/28792948#

#SPJ11

At STP (Standard Temperature and Pressure), one mole of any ideal gas occupies 22.4 liters of volume. The molar mass of SO2 (sulphur dioxide) is 64.06 g/mol.

To calculate the mass of SO2 in 0.410 L of SO2 gas at STP, we can first calculate the number of moles of SO2 using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.08206 L·atm/mol·K) and T is the temperature. At STP, the temperature is 273 K.

So, n = (PV)/(RT) = [(1 atm) x (0.410 L)]/[(0.08206 L·atm/mol·K) x (273 K)] = 0.0162 mol

Therefore, there are 0.0162 moles of SO2 in 0.410 L of SO2 gas at STP.

Finally, we can calculate the mass of SO2 using the molar mass of SO2:

mass = number of moles x molar mass

mass = 0.0162 mol x 64.06 g/mol = 1.04 g

Therefore, there are 1.04 grams of SO2 in 0.410 L of SO2 gas at STP.

To learn more about ideal gas law, click here: brainly.com/question/13821925

#SPJ11

The concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.

The concentration of the compound in the initial 50.0 ml solution can be calculated as follows:

First, we need to calculate the absorbance of the 1.00 ml solution in the 10.0 ml flask:

Absorbance = (0.472)(10.0/1.000) = 4.72

Next, we can use the Beer-Lambert Law to calculate the concentration of the compound in the initial solution:

A = εbc

where A is the absorbance, ε is the molar absorptivity, b is the path length (1.000 cm), and c is the concentration in mol/L.

Plugging in the values we have:

4.72 = (6,310 M^-1 cm^-1)(1.000 cm)(c)

Solving for c, we get:

c = 7.48 x 10^-5 mol/L

Finally, we can convert this to the concentration in the initial 50.0 ml solution:

moles of compound = (7.48 x 10^-5 mol/L)(0.0500 L) = 3.74 x 10^-6 mol

mass of compound = (229.61 g/mol)(3.74 x 10^-6 mol) = 0.000859 g

Concentration = mass/volume = 0.000859 g/0.0500 L = 0.0172 g/L

Therefore, the concentration of the compound in the initial 50.0 ml solution is 0.0172 g/L.

To know more about the Solution, here

https://brainly.com/question/16083903

#SPJ4

CO is made up of carbon (C) and oxygen (O) that are covalently bound and share electrons to create a molecule. To determine a molecule's electron domain shape, we count the number of electron domains surrounding the core atom.

An electron domain can be a bond pair or a single electron pair.

The central atom in CO is carbon, which is double-bonded to oxygen. As a result, the carbon atom has two electron domains: one from the double bond with oxygen and one from the two lone pairs of electrons on oxygen.

As a result, CO contains two electron domains surrounding the center carbon atom.

CO, as a result of the double bond with oxygen and two lone pairs of electrons on oxygen, has two electron domains surrounding its center carbon atom.

learn more about the electron domain here

https://brainly.com/question/30912314

#SPJ1

The mass of copper produced from the reaction of 357 L of H₂ gas with CuO at STP is 949 g.

Using the ideal gas law equation PV = nRT, Pressure is P, temperature is T, gas constant is R, volume is V and moles are n. From the balanced chemical equation, we know that 1 mole of Cu reacts with 1 mole of H₂.

1. The mass of Cu produced is equal to the number of moles of Cu times its molar mass since copper has a molar mass of 63.55 g/mol. Therefore, the steps to solve the problem are,

Convert the volume to liters,

357 L

Calculate the number of moles of H₂ using the ideal gas law:

PV = nRT

(1 atm) (357 L) = n (0.0821 L·atm/mol·K) (273 K)

n = 14.94 mol

2. Calculate the number of moles of Cu based on the balanced chemical equation,

1 mole Cu : 1 mole H₂

14.94 mol H₂ : x mole Cu

x = 14.94 mol

3. Calculate the mass of Cu produced:

m = n × M, mass in grams is m, the number of moles is n, the molar mass of Cu is M.

M(Cu) = 63.55 g/mol

m = 14.94 mol × 63.55 g/mol

m = 949 g

Therefore, the mass of copper produced is 949 g.

To know more about ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4

The volume of the fruit drink comes out to be 0.712 L which is calculated in the below section.

Using the dilution law,

M1 V1 = M2 V2......(1)

Here, M represents the molarity and V represents the volume.

The given parameters are as follows-

M1 = 0.2 M

V1 = 2.5 L

M2  = 0.7 M

To calculate the volume of the fruit drink after dilution, substitute the known values in equation (1) as follows-

0.2 M x 2.5 L = 0.7 M x V2

V2 = (0.2 M x 2.5 L) / 0.7 M

    = 0.5 / 0.7 L

     = 0.7142 L

The volume comes out to be 0.712 L.

To learn more about molarity check the link below-

https://brainly.com/question/30404105

#SPJ4

In building a brand new city in America without using coal or gas, I would choose to use fission nuclear reactors over fusion nuclear reactors.

The reason behind choosing fission nuclear reactors is that they are currently more developed and widely used in practice than fusion nuclear reactors.

Fission reactors have proven their efficiency and safety in generating power for decades.

Fusion nuclear reactors, while having the potential for greater energy output and fewer radioactive waste issues, are still in the experimental stage and not yet commercially viable.

As a city planner, it's crucial to prioritize reliable and established energy sources for the city's needs. Therefore, using fission nuclear reactors would be a more feasible and practical choice for powering a new city in America.

To know more about nuclear fission visit:

https://brainly.com/question/29541275

#SPJ11

The volume of the vessel in the evening when the temperature drops to 8.5°C is approximately 2.64 L.

We can use the combined gas law to solve this problem, which relates the pressure, volume, and temperature of a gas. The formula is:

(P1 x V1)/T1 = (P2 x V2)/T2

where P is pressure, V is volume, and T is temperature.

Using the initial conditions, we have:

P1 = P2 (assuming atmospheric pressure remains constant)

V1 = 3.1 L

T1 = 22.4°C + 273.15

    = 295.55 K

Solving for V2, we get:

V2 = (P1 x V1 x T2)/(P2 x T1)

     = (1 x 3.1 x (8.5°C + 273.15))/(1 x 295.55)

      = 2.64 L

As a result, when the temperature lowers to 8.5°C in the evening, the volume of the vessel is roughly 2.64 L.

To know more about the Temperature, here

https://brainly.com/question/30029642

#SPJ4

In any chemical or physical change, energy cannot be created or destroyed, only transformed in form.

option C.

The first law of thermodynamics is known as the law of Conservation of Energy.

This law states that energy can neither be created nor destroyed but can be converted from one form to another.

So the first law of thermodynamics is not known as the "Law of Conservation of Mass", but rather as the "Law of Conservation of Energy".

The statement that best corresponds to the first law of thermodynamics is option C: "In any chemical or physical change, energy cannot be created or destroyed, only transformed in form."

Learn more about first law of thermodynamics here: https://brainly.com/question/26035962

#SPJ1