A gas occupying 3. 05 liters at STP is warmed to 85. 0°C. It


now occupies 9. 85 liters. What is the pressure of the gas?

Answer: Energy

Explanation:

Energy is the ability to do work or produce heat.

Robert Millikan later determined electron's charge in his "oil drop" experiments.

J.J. Thomson conducted experiments in the late 19th century where he used an electric field to deflect a beam of particles, known as a "cathode ray." These cathode rays were generated by applying a high voltage to a partially evacuated glass tube. Thomson observed that the beam was deflected towards the positive electrode, suggesting that the particles in the cathode ray had a negative charge. This led him to the discovery of the first subatomic particle, the electron.

Robert Millikan later conducted experiments to determine the charge of the electron. His famous "oil drop" experiments involved suspending tiny droplets of oil in an electric field and measuring the force required to keep them stationary. By measuring the charge on the oil droplets and the electric field strength, he was able to calculate the charge of the individual electrons that were present in the oil droplets. The discovery of the electron and its properties paved the way for future developments in particle physics and quantum mechanics. Today, we understand that atoms are made up of a nucleus composed of protons and neutrons, surrounded by electrons that orbit the nucleus in energy levels.

The conclusion is J. J. Thomson discovered the first subatomic particle, the electron, by deflecting a "cathode ray" beam with an electric field. Robert Millikan later determined that particle's charge in his "oil drop" experiments. The discovery of the electron was a crucial step in our understanding of the nature of matter and the structure of the universe.

To learn more about electron visit:

https://brainly.com/question/860094

#SPJ11

Fossil fuels are the largest contributor of the  greenhouse  gas carbon dioxide,this causes health and environmental issues.

This causes health and environmental issues as it contributes to global warming and climate change. The burning of fossil fuels such as coal, oil and gas releases carbon dioxide into the atmosphere, which traps heat and leads to the Earth's temperature rising.

This can cause extreme weather events, rising sea levels, and harm to ecosystems and wildlife. Additionally, carbon dioxide can contribute to respiratory and cardiovascular health issues in humans and animals.

Therefore, it is important to transition to renewable energy sources in order to reduce our reliance on fossil fuels and mitigate the impacts of climate change.

To know more about global warming click on below link:

https://brainly.com/question/12908180#

#SPJ11

You need 0.25 grams of magnesium phosphate to make 250 mL of a 0.10% (m/v) solution.

To calculate the grams of solute required to make 250 mL of 0.10% magnesium phosphate (m/v), you'll first need to determine the mass of the solute in the solution.

1. Convert the percentage to a decimal: 0.10% = 0.0010.
2. Multiply the decimal by the volume of the solution: 0.0010 x 250 mL = 0.25 grams.
3. The result, 0.25 grams, is the mass of magnesium phosphate needed to make 250 mL of a 0.10% (m/v) solution.

In summary, to make a 250 mL solution with a 0.10% (m/v) concentration of magnesium phosphate, you will need to dissolve 0.25 grams of the solute in the solvent.

To know more about magnesium phosphate  click on below link:

https://brainly.com/question/3413068#

#SPJ11

a. To plot the k emission intensity vs. the concentration of k, we can use the given data for the standard solutions of NaCl.

The concentration of K can be expressed in parts per million (ppm) and the corresponding intensity values can be plotted on a graph. Using regression analysis, we can determine the linearity of the data. The resulting graph should show a linear relationship between concentration and intensity.

b. To plot the ratio of the k intensity to the li intensity vs. the concentration of k, we can divide the intensity of K by the intensity of Li for each standard solution and the unknown.

The resulting values can be plotted against the concentration of K. The linearity of this graph can also be determined using regression analysis. The internal standard improves linearity because it helps to correct for any variations in sample handling and instrument response, resulting in more accurate and precise measurements.

c. To calculate the concentration of K in the unknown, we can use the ratio of the intensity of K to Li and the calibration curve obtained from the standard solutions.

From the graph in part (b), we can determine the concentration of K in the unknown by finding its corresponding value on the x-axis. Alternatively, we can use the regression equation obtained from part (a) to calculate the concentration of K in the unknown based on its measured intensity.

To know more about emission intensity :

https://brainly.com/question/29036978

#SPJ11

Answer:

[tex]H _{2} SO _{4}+NaOH→NaSO _{4} +H _{2} O[/tex]

hope it helps:)

The heat that is released by 4.5 moles of methane gas is 4005 kJ.

The chemical reaction of combustion involves the breaking of chemical bonds in the fuel molecules, followed by the recombination of atoms with oxygen to form new molecules such as carbon dioxide, water vapor, and other combustion products.

We know that the balanced reaction equation have been shown in the image that is attached here.

As such we have that;

1 mole of methane gas produces 890 kJ of heat

4.5 moles of methane gas would produce 4.5 * 890/1

= 4005 kJ

Learn more about combustion:https://brainly.com/question/15117038

#SPJ1

Answer: Look at the image I attached - I drew what you should write.

Converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles

Moles ccc is a unit used to measure the amount of substance, particularly in chemistry. It is defined as the number of atoms, molecules, or ions in 12 grams of pure carbon-12. One mole of any substance contains Avogadro's number of particles, which is approximately 6.022 x 10^23.

To convert mass to moles on the ccc scale, you need to know the molar mass of the substance. Molar mass is the mass of one mole of a substance, expressed in grams per mole. To find the number of moles of a substance, you divide the given mass by its molar mass.

For example, the table given shows how many moles are in 6 grams of four elements: oxygen, sulfur, sodium, and iron. To find the number of moles of oxygen, you divide 6 grams by its molar mass, which is 16 grams per mole. This gives you 0.375 moles of oxygen.

The equation given shows how to use carbon molar mass to find the moles of carbon. The molar mass of carbon is 12 grams per mole. Therefore, if you have a sample of carbon with a mass of 24 grams, you can find the number of moles by dividing 24 grams by 12 grams per mole, which equals 2 moles of carbon.

In summary, converting mass to moles ccc requires knowing the molar mass of the substance and using it to divide the given mass to find the number of moles. The moles ccc scale is a useful unit for measuring the amount of substance in chemistry.

To know more about mass, visit:

https://brainly.com/question/19694949#

#SPJ11

The total quantity of heat evolved when 10.0 g of steam at 200°C is condensed, cooled, and frozen to ice at 50°C is 410.56 kJ.

To calculate the total quantity of heat evolved, we need to break down the process into different steps:

Step 1: Condensation of 10.0 g of steam at 200°C

The heat evolved during condensation can be calculated using the formula:

q = m × ΔHvap

where q is the heat evolved, m is the mass of steam, and ΔHvap is the molar heat of vaporization of water, which is 40.7 kJ/mol.

First, we need to calculate the moles of steam:

n = m/M

where M is the molar mass of water, which is 18.02 g/mol.

n = 10.0 g / 18.02 g/mol = 0.555 mol

Now we can calculate the heat evolved during condensation:

q1 = n × ΔHvap = 0.555 mol × 40.7 kJ/mol = 22.5 kJ

Step 2: Cooling of liquid water from 100°C to 0°C

The heat evolved during cooling can be calculated using the formula:

q = m × c × ΔT

where q is the heat evolved, m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature.

We need to calculate the mass of water formed from the condensation of 10.0 g of steam. Since the density of water is 1 g/mL, we know that:

m_water = m_ice = V × ρ = 10.0 g/mL × 0.92 g/mL = 9.2 g

Now we can calculate the heat evolved during cooling:

q2 = 9.2 g × 4.18 J/g°C × (100 - 0)°C = 385 kJ

Step 3: Freezing of liquid water from 0°C to -50°C

The heat evolved during freezing can be calculated using the formula:

q = m × ΔHfus

where q is the heat evolved, m is the mass of water, and ΔHfus is the molar heat of fusion of water, which is 6.01 kJ/mol.

We need to calculate the moles of water:

n = m/M = 9.2 g / 18.02 g/mol = 0.510 mol

Now we can calculate the heat evolved during freezing:

q3 = n × ΔHfus = 0.510 mol × 6.01 kJ/mol = 3.06 kJ

Total heat evolved = q1 + q2 + q3 = 22.5 kJ + 385 kJ + 3.06 kJ = 410.56 kJ

To know more about heat evolved refer to-

https://brainly.com/question/31321782

#SPJ11

The alpha of the investment is - 0.8%.

The alpha of an investment is a measure of its risk-adjusted performance. It indicates the excess return earned by the investment compared to the return predicted by the market based on its beta.

The formula to calculate alpha is:

alpha = actual return - expected return

where the expected return is the risk-free rate plus the product of the market return and the investment's beta.

Here, we are given:

actual return = 10%

market return = 10%

risk-free rate = 2%

beta = 1.1

Expected return = risk-free rate + beta * (market return - risk-free rate)

Expected return = 2% + 1.1 * (10% - 2%)

Expected return = 10.8%

Therefore, the alpha of the investment is:

alpha = actual return - expected return

alpha = 10% - 10.8%

alpha = -0.8%

The negative value of alpha indicates that the investment underperformed compared to what was expected based on its beta and the market return.

To know more about investment refer to-

https://brainly.com/question/15353704

#SPJ11

Complete Question

The total entropy change of the steam during this process is 24.885 kJ/K.

During this process, the system undergoes a phase change from a saturated liquid-vapor mixture to a saturated vapor. The initial state can be determined using a steam table, which shows that at 225 kPa, the saturation temperature of water is 120.23°C. Therefore, the initial state is a mixture of liquid water and steam at 120.23°C with 80% of the mass in the liquid phase.

When the electric resistance heater vaporizes all of the liquid, the system transitions to a state of saturated vapor at the same pressure of 225 kPa and temperature of 120.23°C. The total entropy change of the steam during this process can be calculated using the formula:

ΔS = m * s_final - m * s_initial

where ΔS is the total entropy change, m is the mass of the steam, s_final is the specific entropy of the final state, and s_initial is the specific entropy of the initial state.

At the initial state, using the steam table, the specific entropy of the saturated liquid-vapor mixture can be found to be 1.5875 kJ/kg-K. At the final state, the specific entropy of the saturated vapor can also be found to be 7.2925 kJ/kg-K.

Therefore, the total entropy change of the steam is:

ΔS = 4.2 kg * (7.2925 kJ/kg-K - 1.5875 kJ/kg-K)
ΔS = 24.885 kJ/K

Therefore, the total entropy change of the steam during this process is 24.885 kJ/K.

Know more about Total entropy change here:

https://brainly.com/question/30691597

#SPJ11

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

The correct answer is: The dianion can form a resonance-stabilized conjugated ring, which tends to absorb visible light.

In the first part of the experiment, the reagents used are benzidine and hydrogen peroxide, which react to form a compound called a dianion. This dianion is initially colorless, but when sodium hydroxide is added, it causes the dianion to undergo a rearrangement that forms a resonance-stabilized conjugated ring. This conjugated ring absorbs visible light in the blue-green range, which causes the solution to appear red. This color change is used as an indicator for the presence of blood in forensic and medical labs because benzidine and its derivatives are known to react with the heme group found in blood to form a similar colored proproductduct.
Visit to know more about conjugated ring:-

https://brainly.com/question/15047805

#SPJ11

The characteristic that would be preferred for a better resonance structure is maximized bond strength. Option B is correct.

Maximizing bond strength is a crucial characteristic for a better resonance structure because it leads to a more stable structure. Resonance structures are a set of contributing structures that show the delocalization of electrons in a molecule. These structures should have similar energies and contribute equally to the actual structure of the molecule. The more stable a resonance structure, the greater its contribution to the actual structure.

Formal charges are important for resonance structures, but a minimal formal charge or negative formal charges on the most electronegative atom are not the only factors that contribute to a better resonance structure. In fact, some resonance structures may have formal charges that are not minimized or negative formal charges on less electronegative atoms.

Maximizing bond strength ensures that the structure is stable and contributes significantly to the actual structure of the molecule. Therefore, maximizing bond strength is the most important characteristic for a better resonance structure. Option B is correct.

To know more about the Resonance structure, here

https://brainly.com/question/29375608

#SPJ4

The a and c lattice parameters can be used to calculate the volume of a hcp unit cell i.e.  [tex]\( V = \frac{3}{2} \sqrt{3} a^2 c \)[/tex], and the atomic packing factor for the hcp crystal structure is 0.74, which represents the percentage of space occupied by atoms in the unit cell.

In a hexagonal close-packed (hcp) unit cell, there are six atoms located at the corners of a regular hexagon, and a seventh atom at the center of the hexagon. The unit cell has a height of c and a base with sides of length a. The volume of the unit cell can be calculated as:

[tex]\( V = \frac{3}{2} \sqrt{3} a^2 c \)[/tex]

To show that the atomic packing factor (APF) for an hcp crystal structure is 0.74, we need to calculate the total volume occupied by the atoms in the unit cell and divide it by the total volume of the unit cell.

The volume of one atom can be approximated as a sphere with a radius of a/2, so its volume is [tex]\( \frac{4}{3} \pi \left(\frac{a}{2}\right)^3 = \frac{4}{3} \pi \frac{a^3}{8} \)[/tex]. There are two types of atoms in an hcp unit cell: the six atoms at the corners of the hexagon and the central atom. So the total volume of atoms in the unit cell is:

[tex]\( V_{\text{atom}} = \frac{6}{8} \cdot \frac{4}{3} \pi a^3 + \frac{4}{3} \pi a^3 \)[/tex]

= [tex]\(\frac{2 \sqrt{3} \pi a^3}{3}\)[/tex]

The total volume of the unit cell is just [tex]\(a^2 \cdot c \cdot \sqrt{3} / 2\)[/tex]. So the APF is:

[tex]\( \text{APF} = \frac{V_{\text{atom}}}{V_{\text{cell}}} \)[/tex]

= [tex]\(\frac{2 \sqrt{3} \pi a^3}{3 (a^2 c \sqrt{3} / 2)}\)[/tex]

=[tex]\(\frac{2\pi a}{\sqrt{3}c}\)[/tex]

≈ 0.74

Therefore, the volume of an hcp unit cell can be expressed as [tex]\( \frac{3}{2} \sqrt{3} a^2 c \)[/tex], and the APF for an hcp crystal structure is approximately 0.74.

To know more about the hcp unit cell refer here :

https://brainly.com/question/15904338#

#SPJ11

The thermodynamic equation for the reaction is:

[tex]HNO_3(g) + 4H_2(g)[/tex] → [tex]NH_3(g) + 3H_2O(g) \Delta H = -637 kJ[/tex]

This means that the reaction releases 637 kJ energy per mole ammonia produced. The amount of energy released when one mole of hydrogen gas reacts is 159.25 kJ,

However,  the amount of energy released when one mole of hydrogen gas reacts. From the balanced equation, we can see that one mole of ammonia is produced for every 4 moles of hydrogen gas that react. Therefore, the amount of energy released :

ΔH/4 = -637 kJ / 4 = -159.25 kJ

So, the amount of energy released when one mole hydrogen gas reacts is 159.25 kJ, and we consider this to be a positive value because the reaction is exothermic.

To know more about thermodynamic equations, here

brainly.com/question/30267158

#SPJ4

The pH of the resulting solution is 1.08 (rounded to two decimal places).

First, we need to calculate the amount of acid and base present:

moles of HCl = (0.10 mol/L) * (0.025 L) = 0.0025 mol \\moles of NaOH = (0.10 mol/L) * (0.005 L) = 0.0005 mol

Since HCl and NaOH react in a 1:1 ratio, all of the NaOH will be used up in the reaction and 0.0005 moles of HCl will be left unreacted.

So, total volume of the solution will be [tex]25.0 ml + 5.0 ml = 30.0 ml = 0.03 L[/tex]

The concentration of unreacted HCl will be:

C(HCl) = (0.0025 mol) / (0.03 L) = 0.0833 M

Now we can calculate the pH :  pH = -log[H+]

[H+] = 0.0833 M \\pH = -log(0.0833) = 1.08

To know more about solution, here

brainly.com/question/30665317

#SPJ4

Answer:

pH = 1.18

Explanation:

First, calculate the moles of acid in the solution:

(0.0250 L )(0.10molL)=0.0025 mol acid

Next, calculate the moles of base:

(0.0050 L)(0.10molL)=0.00050 mol base

The strong acid and strong base will dissociate completely to generate the same number of moles of hydronium and hydroxide, respectively. The amount of acid exceeds the amount of base, so all the added hydroxide will neutralize an equivalent amount of hydronium. To find the remaining amount of hydronium, we subtract the moles of hydroxide added (equal to the moles of hydronium neutralized) from the moles of hydronium added:

0.0025 mol H3O+−0.00050 mol OH−=0.0020 mol H3O+

To find the concentration of hydronium, we must divide this number of moles by the total volume of solution, being sure to add the volumes of acid and base added together:

0.0020 mol H3O+0.0300 L≈0.06667 M H3O+

Finally, take the negative logarithm of this amount to obtain the pH.

-log(0.06667)=1.18

Since the hydronium concentration is only precise to two significant figures, the logarithm should be rounded to two decimal places.

The rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

The given chemical reaction shows the stoichiometric relationship between the reactants and products, which is important in determining the rate of the reaction. The rate of formation of N2 is given as 2.00 mol L-1 s-1. This means that for every second, the concentration of N2 increases by 2.00 mol L-1.

To find the rate at which NH3 reacts, we need to look at the stoichiometry of the reaction. From the balanced equation, we can see that for every 4 moles of NH3 that react, 2 moles of N2 are formed. Therefore, the ratio of the rate of formation of N2 to the rate of consumption of NH3 is 2:4, or 1:2.

Using this ratio, we can calculate the rate at which NH3 reacts. If the rate of formation of N2 is 2.00 mol L-1 s-1, then the rate of consumption of NH3 is twice as much, or 4.00 mol L-1 s-1.

In summary, the rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

To know more about stoichiometry, visit:

https://brainly.com/question/30215297#

#SPJ11

In an oxoacid such as [tex]H2SO4[/tex], ionizable hydrogen atoms are those bonded to oxygen atoms.

In [tex]H2SO4[/tex], the two hydrogen atoms bonded to the oxygen atoms are ionizable, meaning they can dissociate from the molecule in water to form [tex]H+[/tex] ions. This makes[tex]H2SO4[/tex] a strong acid, as it can readily donate protons in solution.

The sulfur atom in [tex]H2SO4[/tex] is also bonded to four oxygen atoms, giving it a tetrahedral shape. The electronegativity difference between the sulfur and oxygen atoms in the molecule creates a polar covalent bond, which leads to the acidity of the molecule.

In general, oxoacids have ionizable hydrogen atoms bonded to oxygen atoms, and the number of ionizable hydrogen atoms is determined by the oxidation state of the central atom and the number of oxygen atoms bonded to it.

To know more about oxoacid refer to-

https://brainly.com/question/28306033

#SPJ11

The molecularity of a reaction refers to the number of molecules or particles that are involved in the rate-determining step of the reaction.

In an elementary reaction, the reaction occurs in a single step, and its molecularity is determined by the number of reactant molecules that are involved in this step.

In the case of [tex]Cl2[/tex] falling apart, the reaction can be represented as:

[tex]Cl2 → 2Cl[/tex]

Since this reaction involves only one[tex]Cl2[/tex] molecule in the rate-determining step, the molecularity of the reaction is unimolecular, or simply "1". This means that the reaction rate is dependent only on the concentration of [tex]Cl2[/tex], and no other species are involved in the rate-determining step.

To know more about molecularity refer to-

https://brainly.com/question/31567167

#SPJ11

A heating curve is a graphical representation of how a substance's temperature changes as it absorbs heat energy.

The x-axis represents the amount of heat energy added, while the y-axis represents the temperature of the substance. The heating curve can be divided into three portions, each representing different changes in the substance's physical state and energy.

At the beginning of the heating curve, particles of the substance have the most kinetic energy when the substance is in its solid state. In this portion, the temperature remains constant as the added heat energy is used to break down the intermolecular forces holding the particles together.

This part of the curve is labeled the "melting point" or "fusion" section.

The next portion of the curve represents the transition from the solid to the liquid state. During this section, the temperature again remains constant as the added heat energy is used to overcome the intermolecular forces and convert the substance to a liquid state. This part of the curve is labeled the "boiling point" or "vaporization" section.

Finally, the last portion of the curve represents the liquid state. In this section, the temperature of the substance begins to increase as the added heat energy is used to increase the kinetic energy of the particles. This portion of the curve is labeled the "condensation" or "freezing" section, depending on whether the substance is being cooled or heated.

Overall, a heating curve is a useful tool for understanding how a substance's energy changes during heating, and how this affects its physical state.

To know more about heating curve, visit:

https://brainly.com/question/27018999#

#SPJ11

The energy required to heat 70.0 g of water from 18°C to boiling (100°C) is 24,518.56 J.

Using the heat exchange formula,

q = mcΔT, mass of water is m, specific heat is c and temperature change is ΔT. For water, the specific heat capacity is 4.184 J/g·°C. The temperature change is,

ΔT = (100°C - 18°C) = 82°C

Therefore, the amount of energy required to heat 70.0 g of water from 18°C to boiling is,

q = m × c × ΔT

q = (70.0 g) × (4.184 J/g·°C) × (82°C)

q = 24,518.56 J

Therefore, the energy required to heat the beaker of water is 24,518.56 J.

To know more about Heat change, visit,

https://brainly.com/question/28912732

#SPJ4

Answer:

you equate the question 800×7.2 divide the answer by 735.And you'll get 7.84litre then covert to 0.0m³ if the question says so to get 0.00784

He can do this either by changing the temperature to 150 kelvins or by changing the pressure to 200 kilopascals.

The ideal gas law is a fundamental principle in thermodynamics and describes the behavior of ideal gases under various conditions. It is mathematically represented by the equation:

PV = nRT

where:

P is the pressure of the gas,

V is the volume of the gas,

n is the number of moles of the gas,

R is the ideal gas constant, and

T is the absolute temperature of the gas.

The ideal gas law relates the pressure, volume, temperature, and amount of gas (number of moles) in a system. It assumes that the gas molecules do not interact with each other and occupy negligible volume compared to the total volume of the container. The ideal gas law allows for the calculation of any one of the variables (pressure, volume, temperature, or number of moles) if the other three are known.

Based on the Ideal Gas Equation,

V ∝ T

V ∝ 1/P

Using T :

V₁/T₁ = V₂/T₂

200/300 = 100/T₂

T₂ = 100/200 x 300

T₂ = 0.5 x 300

T₂ = 150 K

Using P :

P₁V₁ = P₂V₂

100 x 200 = P₂ x 100

P₂ = 200 kPa

Learn more about Ideal gas Equation, here:

https://brainly.com/question/30935329

#SPJ12

The expression that describes the heat evolved in a chemical reaction when carried out at constant pressure is ΔH = ΔE - w. Here, ΔH represents the enthalpy change, ΔE represents the internal energy change (also symbolized as ΔU), and w represents the work done.

Enthalpy is the sum of the internal energy of a system and the product of its pressure and volume. At constant pressure, the change in enthalpy is equal to the heat evolved or absorbed in the reaction. This is because any work done during the reaction is accounted for in the change in volume term of enthalpy, and at constant pressure, this term is constant. Therefore, the heat evolved or absorbed in the reaction is solely responsible for the change in enthalpy.

When a chemical reaction is carried out at constant pressure, the heat evolved in the reaction can be described using the symbol q, which represents heat. This is because, at constant pressure, the change in internal energy (symbolized by ΔE or ΔU) is equal to the heat absorbed or released in the reaction (represented by q) minus any work done (represented by w). Therefore, to explain the heat evolved in a chemical reaction at constant pressure, we would use the symbol q.

Learn more about internal energy at https://brainly.com/question/25737117

#SPJ11

The best classification for the creation of a complex ion like Cu(NH3)4 2+ (aq) is a Lewis acid-base reaction. The NH3 molecules serve as Lewis bases in this process, while the Cu2+ ion functions as a Lewis acid by accepting a pair of electrons from them. As a result, a coordination complex is created that contains four NH3 ligands and a Cu2+ ion.

Covalent coordinate bonds are created when the NH3 molecules give the Cu2+ ion a pair of electrons from their lone pairs. As a result, a stable complex ion with a net charge of 2+ is created, with the Cu2+ ion at its centre and four NH3 ligands surrounding it.

Overall, the formation of complex ions involves the interaction of a Lewis acid (metal ion) and a Lewis base (ligand), resulting in the formation of a coordinate covalent bond.

For more questions on:  molecules

https://brainly.com/question/22312099

#SPJ11  

The formation of a complex ion such as Cu(NH3)4 2+ (aq) can be best categorized as a coordination complex.

For such more question on complex ion

https://brainly.com/question/24262383

#SPJ11

The percent yield of the reaction is 80%.

To calculate the percent yield, we need to use the following formula:

The actual yield of the reaction is 342 mg.

To calculate the theoretical yield, we need to first calculate the number of moles of (E)-stilbene and pyridinium bromide perbromide used in the reaction:

Number of moles of (E)-stilbene

Number of moles of pyridinium bromide perbromide

Theoretical yield of meso-stilbene dibromide = number of moles of (E)-stilbene x 2 = 0.002364 mol x 340.05 g/mol = 803 mg

Now we can substitute the values into the formula:

Therefore, the percent yield of the reaction is 80%.

To learn more about percent yield, here

https://brainly.com/question/17042787

#SPJ4

Polar bonds do not always result in polar molecules; for example, carbon dioxide has polar bonds but is a nonpolar molecule because its bond polarities cancel out due to its linear geometry.

The statement that all molecules with polar bonds are polar molecules is not entirely correct. While it is true that polar bonds occur between atoms with different electronegativities, giving rise to partial positive and negative charges within the molecule, a molecule can still be nonpolar if the polar bonds cancel out each other's effects.

For example, carbon dioxide has two polar bonds between the carbon atom and each oxygen atom, but the molecule is nonpolar because the arrangement of the atoms is linear, with the polar bonds facing in opposite directions and canceling each other's effect. Similarly, tetrachloromethane has four polar bonds between the carbon atom and each chlorine atom, but the molecule is nonpolar due to its tetrahedral geometry, which results in the polar bonds being arranged symmetrically around the carbon atom.

Therefore, it is essential to consider both the electronegativity difference and the geometry of the molecule to determine whether a molecule is polar or nonpolar.

To know more about polar bonds, here

https://brainly.com/question/24775418

#SPJ4

Starting with 100 molecules of the first limiting reagent, the maximum number of product molecules that can be formed at the end of the final reaction, given the yields of each reaction, is 11 molecules.

Let's call the starting number of molecules of the first limiting reagent "A". Then, the number of molecules of each reactant and product after each reaction can be represented as follows,

Reaction 1: A → B (80% yield)

Starting molecules of A = 100

Molecules of B produced = 80

Reaction 2: B → C (90% yield)

Starting molecules of B = 80

Molecules of C produced = 72

Reaction 3: C → D (65% yield)

Starting molecules of C = 72

Molecules of D produced = 46.8 (rounded to 47)

Reaction 4: D → E (76% yield)

Starting molecules of D = 47

Molecules of E produced = 35.72 (rounded to 36)

Reaction 5: E → F (30% yield)

Starting molecules of E = 36

Molecules of F produced = 10.8 (rounded to 11)

Therefore, the maximum number of product molecules that can be formed at the end of the final reaction is 11, rounded to the nearest whole number.

To know more about reaction, here

brainly.com/question/30392167

#SPJ4

The electron-transfer method is a way to balance chemical reactions by assigning oxidation numbers to each element and then transferring electrons between the two sides of the equation until the number of electrons is equal on both sides.

In this case, the reactants are solid copper and dilute nitric acid, which will produce copper(II) nitrate, water, and nitrogen monoxide gas (NO).

The first step is to assign oxidation numbers to the elements. For copper, the oxidation number is 0, for nitrogen it is +3, for oxygen it is -2, and for hydrogen it is +1.

The next step is to transfer electrons between the two sides of the equation so that the number of electrons on each side is equal. In this case, we can transfer two electrons from the reactant side to the product side. This will result in the equation being balanced, with the copper being reduced to 0 and the nitrogen being oxidized to +5.

The balanced equation would look like this:

Cu + 4HNO3 → Cu(NO3)2 + 2H2O + 2NO

The electron-transfer method is a simple, effective way to balance chemical equations.

By assigning oxidation numbers and transferring electrons between the reactants and products, we can ensure that the equation is balanced and all atoms are conserved.

Know more about Nitric acid here

https://brainly.com/question/29769012#

#SPJ11