Answer:
16 km
Explanation:
Drawing a right triangle to model the problem helps. I started by drawing the lines of the triangle to model the hiker's journey- a vertical straight line for 11 km north and then a horizontal line connected to the top of it for 11 km east; I then drew the hypothenuse to connect the two lines.
The hypothenuse is what we have to solve for, so we will use the Pythagorean Theorem, a^2 + b^2 = c^2. Since both distances are 11 km both a and b in the equation are 11.
11^2 + 11^2 = c^2
121 + 121 = c^2
242 = c^2
c = 15.56
Rounding the answer makes it 16 km for the hiker's magnitude of displacement.
2. The Himalayas in central Asia are the tallest mountains in the world. But fossils of seashells can be found high in these mountains, far from any ocean.
How do you think they got there?
Answer:
The sea level could have been much higher in the past.
Explanation:
The tectonic plates shifted and the mountain rose from there.
They are trapped throughout the rock whereas the seashells have been on the floor of a modest seafloor.
These same containers dropped down on the base of the silt level or sheet, as well as those layering finally became rock.Few more million generations previously, the Indian civilization or the subcontinent crashed well with the continents of Asia, making the Himalayan mountains rock which thus previously were such a sea level.
Thus the above response is appropriate.
Learn more about the Himalayan mountains here:
https://brainly.com/question/20673296
2.Suppose you lifted the ring when the counter-clockwise orbiting marble was at the top of the circle. Describe the direction of the path that the marble would take.
3. Explain why the marble moved the way it did with the ring in place.
4. Explain why the marble moved the way it did when the ring was removed.
Answer:
3. The marble's trajectory was constantly being changed by running into the ring, forced it to move along the shape of the ring.
4. Once the ring was removed, the marble's momenum kept it going in a straight path as the ring was no longer forcing it to turn.
Explanation:
what does it mean mechanical advange is less than one?
Answer:
this happens when the input force is greater than the output force
HOPE IT HELPED YOU...
4. Prove that:
a.
The unit of pressure is a derived unit.
Explanation:
The pascal (symbol: Pa) is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength. It is defined as one newton per square metre. It is named after the French polymath Blaise Pascal
What is the wavelength of a wave with a frequency of 466 Hz and a speed of
343 m/s?
A. 1.35 m
B. 0.74 m
C. 1.6 x 105 m
D. 6.25 x 10-6 m
Answer:
The answer is option BExplanation:
The wavelength of a wave can be found by using the formula
[tex] \lambda = \frac{c}{f} \\ [/tex]
where
c is the speed of the wave
f is the frequency
From the question
c = 343 m/s
f = 466 Hz
We have
[tex] \lambda = \frac{343}{466} \\ = 0.73605150...[/tex]
We have the final answer as
0.74 mHope this helps you
Answer: B: 0.74 m
Explanation:
Hope this helps / I did this question.
A car travels 30 m in 5 seconds. After accelerating for 3 seconds, it travels 20 m in 2 seconds. The cars acceleration is ___m/s
A 4kg block and a 2kg block can move on horizontal frictionless surface. The blocks are accelerated by a +12-N force that pushes the large block against the smaller one.'
a) Determine the force that the 2kg block exerts on the 4kg block
b) Determine the force that the 4kg block exerts on the 2kg block.
Answer:
a) -4 N
b) +4 N
Explanation:
Draw a free body diagram for each block.
For the large block, there are 2 forces: 12 N pushing to the right, and F pushing to the left.
For the small block, there is 1 force, F pushing to the right.
There are also weight and normal forces in the vertical direction, but we can ignore those.
Sum of forces on the large block in the x direction:
∑F = ma
12 − F = 4a
Sum of forces on the small block in the x direction:
∑F = ma
F = 2a
2F = 4a
Substitute:
12 − F = 2F
12 = 3F
F = 4
The small block pushes on the large block 4 N to the left (-4 N).
The large block pushes on the small block 4 N to the right (+4 N).
What is linear motion?
Answer:
Linear motion is a one-dimensional motion along a straight line, and can therefore be described mathematically using only one spatial dimension.
Explanation:
A baseball is hit into the air with a velocity of 27 m/s. How high does it go?
Answer:
Explanation:
If a baseball is hit into the air with a velocity of 27 m/s, we want to determine the maximum height of the ball. Using the projecile formula;
Max height H = u²/2g
u is the initial velocity of the body = 27m/s
g is the acceleration due to gravity = 9.81m/s²
H = 27²/2(9.81)
H = 729/19.62
H = 37.16m
Hence the ball went 37.16m high
Which of these BEST explains how Earth's surface features are formed by moving tectonic plates? *
5 points
Earth's gravity acts as an opposing force, causing the crust to push upward, break into individual plates, and move along the surface.
The minerals in lithospheric plates are attracted to Earth's magnetic poles, which causes them to move along the surface.
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's crust is separated into individual plates that float on top of molten material, convection currents in the mantle cause them to slowly move.
Answer: The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's surface forms because of this reason:
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
7. A solid wax candle has a volume of 1,700 mL. The candle has a mass of 1.5 kg (1,500 g). What is the
density of the candle?
Answer:
The answer is 0.88 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 1500 g
volume = 1700 mL
We have
[tex]density = \frac{1500}{1700} = \frac{15}{17} \\ = 0.88235294...[/tex]
We have the final answer as
0.88 g/mLHope this helps you
Answer:
0.88
Explanation:
density = mass/volume
density = 1500/1700
density = 0.88
HI CAN ANYONE PLS ANSWER DIS PLS!!!!!!
Answer:
Volume of an object (L): blue 105.00, yellow 105.00, green 102.50, red 101.25
Density of an object (kg/L) Mass / Volume: blue 1, yellow 1, green 1.014, red .992
Sink or Float: blue sink, yellow sink, green float, red float
hope this helps
HURRRY PLEASSSSEEE
Energy required for cellular respiration can be processed from ____.
A) Carbohydrates
B) Fats/ Lipids
C) Proteins
D) All of the above
Answer:
fats / liquids or proteins one of them
Explanation:
..........
Answer:
D) All of the above
Explanation:
I googled it :)
A ball is thrown vertically upwards from a point on the ground. It was observed at a height h twice with a time interval Δt. The initial velocity of the ball is?
A ball is thrown vertically down from the edge of a cliff with a speed of 4 m/s,
how high is the cliff, if it took 12 s for the ball to reach the ground?
A swimmer sets off headed west at 0.40 m/s directly towards the opposite shore of a swift river. The swimmer makes it to the opposite shore 30 meters downstream of their expected position. If the river is 7.5 meters wide, what is the velocity of the water relative to the shore?
Answer:
Explanation:
River is 7.5 m wide . Time taken by it cover this displacement
= displacement / velocity
= 7.5 / 0.4
= 18.75 s
During this period , swimmer will have a displacement of 30 m due to velocity of river water .
Displacement of 30 m downstream will be due to flow of river .
velocity of water flow = displacement / time
= 30 / 18.75
= 1.6 m /s
A car is initially moving at 10.5 m/s and accelerates uniformly to reach a speed of 21.7 m/s in 4.34 s. How far did the car move during this acceleration?
A. 69.9m
B. 6.99m
C. 69.6m/s
D. 6.99m/s
Answer:
A. 69.9m
Explanation:
Given parameters:
Initial velocity = 10.5m/s
Final velocity = 21.7m/s
Time = 4.34s
Unknown:
Distance traveled = ?
Solution:
Let us first find the acceleration of the car;
Acceleration = [tex]\frac{v - u}{t}[/tex]
v is final velocity
u is initial velocity
t is the time
Acceleration = [tex]\frac{21.7 - 10.5}{4.34}[/tex] = 2.58m/s²
Distance traveled;
V² = U² + 2aS
21.7² = 10.5² + 2 x 2.58 x S
360.64 = 2 x 2.58 x S
S = 69.9m
how much faster will a car be going if it accelerates at 1 m/s/s for a total of 60 seconds.
Answer:
Vf = 60 [m/s]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]v_{f}= v_{i}+(a*t)[/tex]
where:
Vf = final velocity [m/s]
Vi = initial velocity = 0
a = acceleration = 1 [m/s^2]
t = time = 60 [m]
Now replacing:
Vf = 0 + (1*60)
Vf = 60 [m/s]
Anyone get this can you please help me, can you also please do it step by step
Answer:
7.69 hours
Explanation:
3 hr/ 1000mi x 130mi = 7.69 hours or 7.7 hours
A man weighing 490N on earth weighs 81.7N on the moon.His mass on the moon is kg
His mass is 50 kg . . . on the Moon, on the Earth, in the capsule rocketing between them, and on Halley's comet if he ever goes there.
Answer:
50kg
Explanation:
The mass of a man on the Earth and the moon is the same, so we only need to use the 490N weight on Earth.
The formula for mass is m=w/g. Plugging in the values, we can determine that m=490N/9.8m/s^2. (g is gravitational constant, which is approximately 9.8m/s^2 on Earth)
The reason that the unit in the answer is in kg is because one newton (N) is 1kg*m/s^2. The m/s^2 is cancelled out by the m/s^2 in the gravity constant, so it leaves kg.
m=50kg
5. An ion consist of 12 electrons and 11 proton. What is the charge
on the ion?
Answer:
-1
Explanation:
Electrons have a negative charge and protons have a positive charge. (+11) + (-12) = -1
the amount of a good or service a
producer wants to sell
scarcity
O supply
demand
O capital
entrepreneurshipb
Answer:
I can't understand you're que... plzz write in a correct way..
A doctor takes an x-ray of your body this is an example of conduction, convection, radiation?
Answer:
RadiationExplanation:
An x-ray emits radiation to see through the outer part of your body.
Hope this helps! <3
An X-ray is a type of radiation which is a type of electromagnetic radiation in the electromagnetic spectrum.
What is electromagnetic spectrum?
The electromagnetic spectrum consists of electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.There are 7 types of electromagnetic radiation in the electromagnetic spectrum.Gamma rays have the highest energy while radio waves have least energy.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
Explain experimental physics.
Answer:
This is a category of physics dealing with the observable phenomena, and experimental aspects by investigation, and scientific testing to measure the properties of matter, and energy.
Answer:
Experimental physics is the category of disciplines and sub-disciplines in the field of physics that are concerned with the observation of physical phenomena and experiments.
I hope you helped^_^
Follow me for more answersWhich statement about elements and atoms is true?
Atoms are the smallest unit of an element.
Atoms are made of particles called elements.
Elements are made of more than one type of atom.
Elements are easily broken down into atoms by a physical reaction.
Which type of energy is stored in a battery?
O A. Nuclear energy
O B. Electrical energy
O C. Electromagnetic energy
O D. Chemical energy
Answer:
Chemical energy is in a battery
The type of energy is stored in a battery is Chemical energy (option d)
Batteries store chemical energy. When a battery is charged, a chemical reaction occurs inside it, converting the reactants into different products. This process stores energy in the form of chemical bonds within the battery's components.
When you use the battery to power a device, the reverse chemical reaction takes place, releasing the stored energy as electrical energy. This flow of electrons creates an electric current that powers the device connected to the battery.
The capacity of a battery to store and release energy depends on the type and quantity of chemicals used in its construction. Different types of batteries, such as alkaline, lithium-ion, or lead-acid batteries, have varying chemical compositions, affecting their energy storage capabilities and overall performance.
So, the correct option is (d).
To know more about energy here
https://brainly.com/question/1932868
#SPJ6
The changes that are visible during a chemical reaction are signs that the nuclei in the reactants have been rearranged.
Please select the best answer from the choices provided
ОТ
OF
Answer:
the answer is F
Explanation: I put T on the question and got it wrong so it's F on edge ;)
1. How do you relate the law of inertia to the balanced and unbalanced force?
??
Explanation:
I don't get you right
A car is traveling down the highway cruise control at 50m/s (this means its is traveling with a constant velocity NOT accelerating). If it does this for 5 minutes (300s), how far does it travel?
Given parameters:
Speed of car = 50m/s
Time of travel = 5minutes (300s)
Unknown;
Distance of travel = ?
To solve this problem, we need to understand how speed relates with distance and time.
Speed is a physical quantity. It is the distance traveled divided by time taken.
Speed = [tex]\frac{distance}{time}[/tex]
So,
Distance = speed x time
Input the parameters and solve for the distance;
Distance = 50m/s x 300s
Distance = 15000m
The distance covered during this time interval and speed is 15000m
A truck traveling at a velocity of 33m/s comes to a halt by decelerating at 11m/s^2. How far does the truck travel in the process of stopping. identify known variables such as V, V0, a, t, and delta x.
Answer:
The truck was moving 16.5 m/s during the time it took to stop, which was 3 seconds.
Initial velocity = 33 m/sFinal velocity = 0 m/sAverage velocity = (33 + 0) / 2 m/s = 16.5 m/sExplanation:
First, how long does it take the truck to come to a complete stop?( 33 m/s ) / ( 11 m / s^2 ) = 3 secondsThen we can look at the average velocity between when the truck started decelerating and when it came to a complete stop. Because the deceleration is constant (always 11m/s^2) we can use this trick.The time taken to stop the truck is 3 seconds. The final velocity is zero. Then, the distance travelled by the truck is 49.5 m.
What is acceleration ?Acceleration is a physical quantity that, measures the rate of change in velocity. It is a vector quantity thus having both magnitude and direction. It can be defines as the ratio of change in velocity to the change in time.
Given initial velocity = 13.5 m/s
final velocity is zero since the bicycle is stopping.
then Δt = Δv/a
Δt = 33 m/s/ 11 m/s² = 3 seconds.
Hence, the truck will take 3 s to complete stop.
The distance covered within this time can be determined using the equation as follows:
s = u t + 1/2 at²
where u is the initial velocity
The acceleration a = - 11 m/s² the minus sign is due to deceleration.
s = (33m/s × 3 s) + (-11 m/s² ×3 s ×3 s) = 49.5 m.
Therefore, the truck will travel up to 49.5 m before stopping.
Find more on acceleration:
http://brainly.com/question/2303856
#SPJ2