The landscaper uses 75.00 joules of work to move the lawn mower.
Work is the product of force and displacement, in the direction of the force.
Given that the landscaper uses a force of 15.00 N to push a lawn mower, the amount of work done depends on the distance the mower is pushed.
If we assume that the mower is pushed a distance of 5 meters, the work done can be calculated as follows:
Work = force x distance x cos(theta)
where theta is the angle between the force and the direction of displacement, which we assume to be zero degrees in this case. Therefore, the work done can be calculated as:
Work = 15.00 N x 5 m x cos(0) = 75.00 J
Therefore, the landscaper uses 75.00 joules of work to move the lawn mower.
To know more about joules, refer here:
https://brainly.com/question/25947916#
#SPJ11
a 450.0-g block is attached to a spring of spring constant 45 n/m, and is in simple harmonic motion on a frictionless surface with an amplitude of 7.5 cm. a second identical block, moving at 12 m/s in line with the spring, strikes the first one when the spring is at its maximum extension. the two blocks stick together. what is the amplitude of the resulting oscillation?
The amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
Before the collision:
- The first block
(mass m1 = 0.45 kg) is at its maximum extension
(amplitude A1 = 0.075 m) and has zero velocity.
-
The second block
(mass m2 = 0.45 kg) is moving at a velocity
v2 = 12 m/s and has no potential energy.
During the collision, the two blocks stick together
(mass m = m1 + m2 = 0.9 kg).
After the collision, the combined mass oscillates with a new amplitude A2.
Before collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA1^2
- Momentum of the system = m2 * v2
After collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA2^2
- Momentum of the system = m * v
Since mechanical energy and momentum are conserved:
- (1/2)kA1^2 = (1/2)kA2^2
- m2 * v2 = m * v
We know A1, m1, m2, and v2. We can solve the equations to find A2.
From the energy equation:
A2^2 = A1^2 * (m1 + m2) / m1 = (0.075^2) * (0.9 / 0.45) = 0.01125
A2 = sqrt(0.01125ou) ≈ 0.106 m
So, the amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.
To learn more about : Amplitude
https://brainly.com/question/3613222
#SPJ11
Answer:
85 cm
Explanation:
The speed of the blocks right after the collision is 6 m/s, so now we have an oscillator of mass 900.0 g with a speed of 6 m/s when x = 7.5 cm. The amplitude of this oscillator is 85 cm
Explain boyle’s law in terms of the kinetic-molecular theory of gases.
Boyle's Law states that, at constant temperature, the pressure of a gas is inversely proportional to its volume. This law can be explained and understood using the kinetic-molecular theory of gases.
According to the kinetic-molecular theory, gases are composed of particles (atoms or molecules) that are in constant random motion. These particles collide with each other and with the walls of the container they are in. The pressure of a gas is the result of these collisions.
When the volume of a gas is decreased, the same number of gas particles are confined to a smaller space. As a result, the particles have less space to move around, and they collide more frequently with each other and with the walls of the container. The increased frequency of collisions leads to an increase in the pressure exerted by the gas.
Conversely, when the volume of a gas is increased, the gas particles have more space to move around, and they collide less frequently with each other and with the walls of the container. The decreased frequency of collisions leads to a decrease in the pressure exerted by the gas.
Therefore, according to the kinetic-molecular theory, as the volume of a gas decreases, the gas particles collide more frequently, resulting in an increase in pressure. This observation is consistent with Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature.
To know more about Boyle's Law refer here
https://brainly.com/question/21184611#
#SPJ11
A truck with the mass of 8 ton travels at a velocity of 60km/h and collides with a truck with mass of 5 ton travelling in the same direction at 40kh/h. After the collision the two trucks move together. Calculate the final common velocity if the TWO trucks in m/s after the collision?
The final common velocity of the two trucks after the collision is 14.53 m/s.
To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).
First, we need to convert the velocities from km/h to m/s:
60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s
Next, we calculate the initial momentum of both trucks:
Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s
Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:
Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s
So, the final common velocity of the two trucks after the collision is 14.53 m/s.
To know more about collision, refer here:
https://brainly.com/question/24616147#
#SPJ11
State the law of equipartition of energy in no more than 4 sentences.
The law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium will have an average energy of kT/2, where k is the Boltzmann constant and T is the temperature in Kelvin.
This means that in a system at thermal equilibrium, energy is distributed equally among all available modes of motion.
For example, in a gas, the three degrees of freedom associated with translational motion (movement in three dimensions) contribute kT/2 each to the total energy of the gas, while each degree of freedom associated with rotational motion contributes kT/2 as well.
This law is essential to understanding the behavior of thermodynamic systems, particularly in relation to temperature and heat. It explains why adding heat to a system will increase its temperature, and why the temperature of a system is related to the average kinetic energy of its particles.
In summary, the law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium has an average energy of kT/2, where k is the Boltzmann constant and T is the temperature. It is crucial to understanding the behavior of thermodynamic systems and the relationship between temperature and energy distribution.
To know more about equipartition refer here:
https://brainly.com/question/31780484#
#SPJ11
Assuming that the web acts like a spring, what is the spring constant of the web?.
The concept of a web acting like a spring refers to its ability to store and release energy when loaded with content. The spring constant, represented by the symbol k, measures the stiffness of the web or its ability to resist deformation under load.
However, it is not possible to provide a definitive answer to what the spring constant of a web is, as it depends on various factors such as the web's material, thickness, and structure.
Moreover, the way the web is loaded, such as the type and amount of content, also affects its spring constant.
That said, some studies have attempted to estimate the spring constant of webs. For instance, a study published in the Journal of Experimental Biology found that the silk of orb-weaving spiders has a spring constant ranging from 30 to 600 N/m, depending on the type of silk and its thickness.
Another study published in the Journal of the Royal Society Interface estimated that the spring constant of a spider's web can range from 0.1 to 5 N/m.
In summary, the spring constant of a web depends on various factors and cannot be accurately determined without considering these factors. Nonetheless, studies have provided some estimates for specific types of webs, such as those produced by spiders.
To know more about spring constant refer here
https://brainly.com/question/14159361#
#SPJ11
identify the dependent and independent variable on the following scenario: a researcher is studying the effect of sleep on academic performance. Thanking that less sleep will lead to lower grades. She has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want she did monitors academic behavior during English math classes among participants.
In this scenario, the independent variable is the amount of sleep and the dependent variable is the academic performance in English and math classes.
In this research, a researcher is studying the effect of sleep on academic performance. She thinks that less sleep will lead to lower grades. Therefore, she has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want.
She then monitors academic behavior during English math classes among participants.
The independent variable here is the amount of sleep that the participants get each night. It is the variable that is being manipulated or changed by the researcher.
The researcher is interested in studying the effect of different amounts of sleep on academic performance. Therefore, the amount of sleep is the independent variable.
The dependent variable is the academic performance of the participants in English and math classes. It is the variable that is being measured by the researcher. The researcher wants to know how different amounts of sleep affect academic performance.
For more such questions on independent variable, click on:
https://brainly.com/question/28433016
#SPJ11
how does the epa calculator determine co2 for gas VS electric cars?
Answer:
The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.
Explanation:
The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.
An astronaut weighs 8.00 × 102 newtons on the surface of Earth. What is the weight of the astronaut 6.37 × 106 meters above the surface of Earth?
The new weight of the object from the description would now be 2 × 10^2 N.
What is the relationship of the force and the distance?Given that the force between two bodies is inversely proportional to the square of their distance, doubling that distance results in a force that is one-fourth of what it was before.
We would now know that the force that is now acting on the object is;
Weight = 1/4 * 8.00 × 10^2 N
Weight = 2 × 10^2 N
This is true when we consider the universal gravitational law that governs the force on the object.
Learn more about weight:https://brainly.com/question/10069252
#SPJ1
What do you measure when you find a substance’s temperature?
Answer:
The Average kinetic Energy of all the atoms and molecules of substance
Explanation:
Draw the path of the light ray until it reaches point X. Show how the change in the speed of the light ray affects its direction as it passes from one medium to another. Remember, light travels more slowly in glass than it does in air. Hint: The light will bend both when it enters and when it exits the glass!
Assuming the light ray enters the glass from air at an angle, it will bend towards the normal (an imaginary line perpendicular to the surface of the glass) as it enters the glass due to the decrease in speed.
Once inside the glass, the light ray will continue to travel in a straight line until it reaches the other side of the glass. As it exits the glass and enters air again, it will bend away from the normal due to the increase in speed.
Overall, the path of the light ray will be bent twice, once when it enters the glass and again when it exits the glass, due to the change in the speed of light in the two different media.
Learn more about light ray Visit: brainly.com/question/30614297
#SPJ4
When a light ray crosses from water into glass, it emerges at an angle of 30° with respect to the normal of the interface. What is its angle of incidence?
The angle of incidence of the light ray is approximately 24.4°.
When a light ray crosses from one medium to another, it bends due to a change in its speed. This bending is described by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media.
In this case, the light ray crosses from water into glass, so we know that the speed of light in glass is slower than in water. The angle of incidence is the angle between the incident ray and the normal to the interface, while the angle of refraction is the angle between the refracted ray and the normal.
Since we are given the angle of refraction (30°), we can use Snell's law to find the angle of incidence. Letting [tex]n_1[/tex] and [tex]n_2[/tex] be the indices of refraction of water and glass respectively, we have:
[tex]$\frac{\sin(\theta_{i})}{\sin(30°)}=\frac{n_2}{n_1}$[/tex]
We can look up the indices of refraction of water and glass and find that [tex]n_1[/tex] = 1.33 and [tex]n_2[/tex] = 1.5. Solving for the angle of incidence, we get:
[tex]$\sin(\theta_{i})=\sin(30°)\times\frac{n_1}{n_2}=0.414$[/tex]
Taking the inverse sine of both sides, we get:
angle of incidence = 24.4°
To learn more about the angle of incidence
https://brainly.com/question/30048990
#SPJ4
The resistance in a series rcl circuit is doubled. (a) does the resonant frequency increase, decrease, or remain the same
The resonant frequency will also remain the same.
The resonant frequency of a series RLC circuit is given by the formula f = 1/(2π√(LC)), where L is the inductance of the circuit, C is the capacitance of the circuit, and π is a mathematical constant approximately equal to 3.14.
Doubling the resistance in the circuit will not change the inductance or capacitance, so these values will remain the same.
Therefore, the resonant frequency will also remain the same.
In other words, the circuit's ability to store and transfer energy at its resonant frequency will not be affected by the change in resistance.
To know more about resonant frequency, refer here:
https://brainly.com/question/28168823#
#SPJ11
A 2. 5 kg block initially at rest is pulled to the
right along a horizontal, frictionless surface
by a constant, horizontal force of 12. 3 N.
Find the speed of the block after it has
moved 2. 9 m
The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.
We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.
Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:
Net work = Work done by applied force = Fd
where F is the applied force and d is the distance moved by the block.
The change in kinetic energy of the block is given by:
Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]
where m is the mass of the block and v is its final velocity.
Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:
[tex]Fd = 1/2 mv^2[/tex]
Solving for v, we get:
[tex]v = \sqrt{(2Fd/m)[/tex]
Substituting the given values, we get:
[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]
To know more about work-energy principle refer here
https://brainly.com/question/28043729#
#SPJ11
Why is the sun so much bigger & brighter than the other stars in the sky?
The Sun appears bigger and brighter than other stars in the sky because it is much closer to the Earth than any other star.
While the Sun is only an average-sized star, it is still much closer to us than any other star, so it appears larger and brighter in the sky.
Additionally, the Sun is also the closest star to the Earth that undergoes nuclear fusion, which is the process that produces its energy and makes it shine.
Other stars in the sky may be much larger or brighter than the Sun, but their distance from us makes them appear much smaller and dimmer.
To know more about nuclear fusion refer here
https://brainly.com/question/12701636#
#SPJ11
A diode has a high resistance in the __________ direction. Which word completes this sentence?
ans. forward baised
The resistance measurement is high when the diode is forward-biased because current from the multimeter flows through the diode, causing the high-resistance measurement required for testing.
Distant galaxy is simultaneously rotating and receding from the earth. As the drawing shows, the galactic center is receding from the earth at a relative speed of uG 5 1. 6 3 106 m/s. Relative to the center, the tangential speed is vT 5 0. 4 3 106 m/s for locations A and B, which are equidistant from the center. When the frequencies of the light coming from regions A and B are measured on earth, they are not the same and each is diff erent from the emitted frequency of 6. 200 3 1014 Hz. Find the measured frequency for the
We can use the relativistic Doppler effect formula, which relates the observed frequency of light to its emitted frequency and the relative velocity between the emitter and observer:
[tex]f_{observed} = f_{emitted} * sqrt((1 + v/c) / (1 - v/c))[/tex]
where:
f_observed is the observed frequency
f_emitted is the emitted frequency
v is the relative velocity between the emitter and observer
c is the speed of light
For region A,
the emitter is moving tangentially at a speed of [tex]vT = 0.43 *10^6[/tex] m/s relative to the galactic center, which is receding from Earth at a speed of [tex]uG = 1.63 * 10^6 m/s.[/tex]
Therefore, the relative velocity between the emitter and observer (Earth) is:
[tex]v = vT + uG = 2.06 *10^6 m/s[/tex]
Plugging this into the relativistic Doppler effect formula, along with the emitted frequency of[tex]6.200 * 10^14 Hz[/tex], we get:
[tex]f_{observed_A} = 6.200 * 10^14 Hz * sqrt((1 + 2.06 *10^6 m/s / 3 * 10^8 m/s) / (1 - 2.06 * 10^6 m/s / 3 *10^8 m/s))[/tex]
[tex]= 6.225 *10^{14} Hz[/tex]
Therefore, the observed frequency of light from region A is [tex]6.225 *10^{14} Hz[/tex] .
Using the same method for region B, which is also equidistant from the galactic center, we get the same observed frequency of
[tex]6.225 *10^{14} Hz[/tex]
To know more about Doppler effect refer here
https://brainly.com/question/28106478#
#SPJ11
4. An open cylinder is filled with water to a height of 0.5m. What is the absolute pressure on the base area? s
Explanation:
To find the absolute pressure on the base area of the cylinder, we need to use the formula for absolute pressure:
P(abs)=P(atm)+P(gauge)
where P(abs) is the absolute pressure, P(atm) is the atmospheric pressure, and P(gauge) is the gauge pressure.
The gauge pressure is the pressure exerted by the water column on the base area. It depends on the height and density of the water column, and can be calculated using the formula:
P(gauge)=ρgh
where ρ is the density of water, g is the acceleration due to gravity, and h is the height of the water column.
Given that the height of the water column is 0.5 m, and assuming that the density of water is 1000 kg/m^3 and the acceleration due to gravity is 9.8 m/s^2, we can find the gauge pressure as:
P(gauge)=1000×9.8×0.5
P(gauge)=4900 Pa
The atmospheric pressure at sea level is approximately 101325 Pa. Therefore, we can find the absolute pressure on the base area as:
P(abs)=101325+4900
P(abs)=106225 Pa
Hence, the absolute pressure on the base area of the cylinder is 106225 Pa.
Donate me if you want: https://www.buymeacoffee.com/imstillsid
What best describes the likely origin of the asteroid belt between mars and jupiter?.
The likely origin of the asteroid belt between Mars and Jupiter can be best described as a result of the solar system's formation process, where the material in this region could not coalesce into a single planet due to the gravitational influence of Jupiter.
During the formation of the solar system, approximately 4.6 billion years ago, a massive cloud of gas and dust began to collapse under its own gravity.
This led to the formation of the Sun, and the remaining material formed a protoplanetary disk around it. Over time, solid particles within the disk started to collide and stick together, eventually forming planetesimals.
In the region between Mars and Jupiter, the process of planet formation was disrupted by the strong gravitational forces exerted by Jupiter, which is the largest planet in our solar system.
These forces prevented the planetesimals from effectively coalescing into a single, larger planetary body. Instead, the planetesimals remained as individual objects, creating what we now know as the asteroid belt.
The asteroid belt contains millions of rocky and metallic objects, ranging in size from small dust particles to larger bodies several hundred kilometers in diameter.
The composition of these asteroids provides valuable insights into the early solar system, as they represent leftover material from its formation.
In summary, the likely origin of the asteroid belt between Mars and Jupiter is a result of the solar system's formation process, where the strong gravitational influence of Jupiter prevented the material in that region from forming a single planet.
To know more about asteroid belt refer here
https://brainly.com/question/25531422#
#SPJ11
Un globo de helio se utiliza para elevar una carga de 110 N. El peso de la cubierta del globo
es de 50 N y su volumen cuando está totalmente hinchado es de 32 m3
. La temperatura del
aire es de 0 °C, y la presión atmosférica es de 1 atm. El globo se infla con el gas helio
suficiente para que la fuerza neta sobre él y su carga sea de 30 N. Despreciar los cambios de
temperatura con la altura.
A. Encuentre una expresión para la densidad de un gas ideal.
B. Usando la expresión anterior y la ecuación d
d
= −, encuentre una expresión para
la variación de la presión de la atmósfera considerando que toda la atmósfera tiene
una temperatura uniforme de 0 °C, y una masa molecular = 28,8×10-3
kg/mol.
C. Encuentre el volumen del globo a una presión de 1 atm capaz de levantar el globo
con la una fuerza de 30 N. (aire = 1,293 kg/m3 y He = 0,179 kg/m3
).
D. Encuentre el número de moles de helio que debe contener el globo para flotar con las
condiciones del inciso c).
E. Explique que debe de pasar con el globo al comenzar a subir, si la temperatura gas se
mantiene constante e igual a la temperatura de la atmósfera.
F. Encuentre la presión y la altitud en la que el globo se encuentra totalmente hinchado.
G. Explique que debe de pasar con la densidad de un gas ideal al disminuir la presión.
Es posible que el globo se detenga a alguna altura o simplemente se va a escapar de
la atmósfera
The net force acting on the helium balloon is 3603.2 N.
Calculate the weight of the load and the balloon cover:
Weight = Mass x Gravity
Weight of load = 110 N
Weight of balloon cover = 50 N
Calculate the buoyant force:
Buoyant force = Density x Gravity x Volume
Since helium is lighter than air, it will displace a volume of air equal to its own volume. Therefore, we can use the density of air instead of helium.
Buoyant force = 1.2 kg/m3 x 9.8 m/s2 x 32 m3 = 3763.2 N
Calculate the net force:
Net force = Buoyant force - Weight
Net force = 3763.2 N - 110 N - 50 N = 3603.2 N
To know more about buoyant force, here
brainly.com/question/21990136
#SPJ4
--The completely accurate question is , What is the net force acting on the helium balloon if it is used to lift a load of 110 N and the weight of the balloon cover is 50 N, and its volume when fully inflated is 32 m3? --
Three capacitors, with capacitances of c1 = 2.0 μf, c2 = 3.0 μf , and c3 = 6.0 μf, respectively, are connected in parallel. a 500-v potential difference is applied across the combination. determine the voltage across each capacitor and the charge on each capacitor
The charge on capacitor C1 is 1000 μC, the charge on capacitor C2 is 1500 μC, and the charge on capacitor C3 is 3000 μC. When capacitors are connected in parallel, the voltage across each capacitor is the same.
So, the voltage across capacitor C1 is 500 V,
the voltage across capacitor C2 is 500 V,
the voltage across capacitor C3 is 500 V.
Calculating the charge on each capacitor
The charge on a capacitor is equal to the capacitance of the capacitor multiplied by the voltage across the capacitor. So,
the charge on capacitor C1 = 2.0 μF * 500 V = 1000 μC,
the charge on capacitor C2 = 3.0 μF * 500 V = 1500 μC,
the charge on capacitor C3 = 6.0 μF * 500 V = 3000 μC.
To know more about capacitors:
https://brainly.com/question/31627158?referrer=searchResult
#SPJ12
In a physics lab, a group of students are provided with a sphere of unknown mass, a roll of string, a ring stand, and measuring devices that are commonly found in a physics lab. The students must graphically determine the acceleration due to gravity near earth’s surface by putting the sphere into simple harmonic motion.
To graphically determine the acceleration due to gravity near Earth's surface using a sphere in simple harmonic motion, the students can follow these steps:
1. Set up the Experiment:
- Attach the sphere to one end of the string.
- Attach the other end of the string to the ring stand, allowing the sphere to hang freely.
- Ensure that the sphere is not touching any other objects and has enough clearance to swing back and forth.
2. Measure the Period:
- Use a stopwatch or a timer to measure the time it takes for the sphere to complete one full oscillation (swing back and forth).
- Repeat this measurement multiple times to get accurate and consistent results.
3. Measure the Length:
- Measure the length of the string from the point of suspension (ring stand) to the center of the sphere.
- Ensure that the measurement is taken from the resting position of the sphere, not when it is swinging.
4. Calculate the Acceleration due to Gravity:
- The period of simple harmonic motion (T) is related to the acceleration due to gravity (g) and the length of the pendulum (L) through the formula: T = 2π√(L/g).
- Rearrange the formula to solve for g: g = (4π²L) / T².
- Substitute the measured values of the period (T) and length (L) into the formula to calculate the acceleration due to gravity (g).
5. Repeat for Different Lengths (Optional):
- If time and resources permit, the students can repeat the experiment with different lengths of the string.
- By measuring the period (T) and length (L) for different setups, they can collect multiple data points to create a graph and further analyze the relationship between period and length.
6. Graphical Analysis:
- Plot the period (T) on the x-axis and the corresponding calculated acceleration due to gravity (g) on the y-axis.
- Use the data points obtained from the experiment to create a graph.
- The slope of the graph represents the square of the reciprocal of the acceleration due to gravity (1/g²), allowing the students to determine the acceleration due to gravity near Earth's surface.
To know more about acceleration refer here
https://brainly.com/question/9415862#
#SPJ11
Based on the data table, find the acceleration and then predict the velocity at the time 3. 5 seconds.
A)
The acceleration is 5 m/s/s and the velocity at a time of 3. 5 seconds will be
35 m/s.
B)
The acceleration is 10 m/s/s and the velocity at a time of 3. 5 seconds will
be 35 m/s.
The acceleration is 10 m/s/s and the velocity at a time of 3. 5 seconds will
be 70 m/s
The acceleration is 5 m/5/5 and the velocity at a time of 3. 5 seconds will be
17. 5 m/s
The acceleration is 5 m/s/s and the velocity at a time of 3.5 seconds will be 17.5 m/s. Option D is correct.
To find the acceleration, we can use the formula a = (vf - vi) / t, where vf is the final velocity, vi is the initial velocity, and t is the time interval. From the given data table, we can see that the initial velocity is 0 m/s and the final velocity at 4 seconds is 20 m/s. Therefore, the acceleration is (20 m/s - 0 m/s) / 4 s = 5 m/s/s.
To predict the velocity at 3.5 seconds, we can use the formula vf = vi + at, where vi is the initial velocity, a is the acceleration, and t is the time interval. Substituting the given values, we get vf = 0 m/s + 5 m/s/s x 3.5 s = 17.5 m/s. Therefore, the predicted velocity at 3.5 seconds is 17.5 m/s. Option D is correct.
To know more about the Acceleration, here
https://brainly.com/question/10820394
#SPJ4
What happens to the frequency of the mass spring system if length of the spring is
cut into one third
Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:
f = 1 / (2π) x √(k/m)
where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.
Explanation:
All of the following are active listening skills and intercultural communication skills used in the classroom except:
Asking questions for clarification
Avoiding making judgments or assumptions
Observing students' nonverbal messages
Making sure students look you in the eye
All of the following are active listening skills and intercultural communication skills used in the classroom except (d).Making sure students look you in the eye is correct option.
Making sure students look you in the eye is not an intercultural communication skill or an example of active listening. It is a behaviour that might be culturally distinctive or a matter of desire, but it does not always advance productive dialogue or comprehension in the classroom.
Components of effective communication include: skills in verbal and nonverbal communication, active listening, saying no, and resolving conflicts. Effective communication means being able to express your needs, wants, and dislikes to another person without causing conflict or tension.
A few components of effective communication are as follows: communicating both orally and nonverbally, talents in active listening, refusal, and conflict resolution
Therefore the correct option is (d).
To know more about communication
https://brainly.com/question/3056216
#SPJ4
the horizontal surface which the 1 block of mass 2kg slides frictionless the force of 29N acts on the block in a horizontal direction and the force of 87 N acts on the block at an angle as shown what is the magnitude of the resulting acceleration of the block (1) 5 (2) 2.2549 (3) 4.5 (4) 3.63636 (5) 5.90909(6) 6.89819 (7) 2.75 (8) 14.5455 (9)7.25 (10) 4.10714
The magnitude of the resulting acceleration of the block is (8), 14.5455 m/s²
How to determine magnitude?Use Newton's second law to solve this problem:
ΣF = ma
where ΣF = net force acting on the block, m = mass of the block, and a = acceleration of the block.
Resolve the force of 87 N into its horizontal and vertical components.
F_horizontal = F cosθ = 87 cos 30° = 75.366 N
F_vertical = F sinθ = 87 sin 30° = 43.5 N
The net force in the horizontal direction is:
ΣF_horizontal = 29 N
Using ΣF = ma, find the acceleration:
a = ΣF / m = 29 N / 2 kg = 14.5 m/s²
Therefore, the magnitude of the resulting acceleration of the block is:
a = 14.5 m/s²
The answer is (8) 14.5455, which rounds to 14.5 m/s².
Find out more on magnitude here: https://brainly.com/question/30337362
#SPJ1
I’LL MARK YOU BRAINIEST IF U ANSWER PLEASE
1. Suppose the government passed a law saying, 'everyone must use an electric toothbrush. " use the four criteria to assess this change in the system of brushing your teeth
2. What are two methods of support used to keep a system operating safely and efficiently
3. A police system lifts a 500-N Weight A distance of 1. 5m. Marina pulls the rope A distance of 9. 0m, exerting a Force of 100 N.
a) what is the mechanical advantage of this pulley system
b) What input did marina do on the road
c) what useful output did the rope do on the weight
d) what is the efficiency of the pulley system
THIS IS GRADE 8 PHYSICS PLEASE ANSWER
1. The four criteria for assessing a change in a system are environmental impact, economic impact, social impact, and technical feasibility.
Environmental impact: The use of electric toothbrushes may have a negative environmental impact due to the need for electricity to power them. However, if the electricity is generated from renewable sources, the impact may be minimal.
Economic impact: The cost of electric toothbrushes may be higher than manual toothbrushes, which may put a financial burden on some people. However, electric toothbrushes may also have a longer lifespan and require less frequent replacement, which may offset the initial cost.
Social impact: The use of electric toothbrushes may be seen as a status symbol, which may create social inequalities. Additionally, some people may prefer the feeling of a manual toothbrush, which may lead to resistance to the change.
Technical feasibility: The technology for electric toothbrushes already exists and is widely available, so this change is technically feasible.
2. Two methods of support used to keep a system operating safely and efficiently are maintenance and troubleshooting. Maintenance involves regularly checking and repairing components of the system to prevent breakdowns and ensure optimal performance. Troubleshooting involves identifying and resolving problems that arise during the operation of the system.
3.
a) The mechanical advantage of this pulley system is equal to the weight lifted divided by the force applied. In this case, the weight lifted is 500 N and the force applied is 100 N, so the mechanical advantage is 5.
b) The input that Marina did on the rope is equal to the force she applied multiplied by the distance she pulled the rope. In this case, the force is 100 N and the distance is 9.0 m, so the input is 900 J.
c) The useful output that the rope did on the weight is equal to the weight lifted multiplied by the distance it was lifted. In this case, the weight lifted is 500 N and the distance is 1.5 m, so the useful output is 750 J.
d) The efficiency of the pulley system is equal to the useful output divided by the input, multiplied by 100% to express the result as a percentage. In this case, the useful output is 750 J and the input is 900 J, so the efficiency is 83.3%.
With all his gear, Neil Armstrong weighed 360 pounds on Earth. When he landed on the Moon, he weighed 60 pounds. Why?
Answer: C.
The gravity on the Moon is less than the gravity on Earth.
Explanation: plato :3
4. what is the gravitational attraction between two objects of mass 5,000,000kg (5.0 x 106 kg) at a distance of
100 meters from each other? estimate g as 6.67 * 10-11 n (m/kg)?
a. ion
b. .17 n
c. 57000 n
d. 2300 n
e. 1900 n
help asap no rocky
The gravitational attraction between the two objects is approximately 167.5 N, which is closest to option B. 0.17 N.
We'll use the gravitational attraction formula to find the gravitational force between two objects of mass 5,000,000 kg ([tex]5×[/tex][tex]10^{6}[/tex] kg) at a distance of 100 meters from each other, with an estimated gravitational constant (G) of [tex]6.67[/tex]×[tex]10^{-11}[/tex] N(m/kg)².
The formula is:
F = [tex]G(\frac{mM}{r^{2}})[/tex]
where F is the gravitational force, G is the gravitational constant, m₁, and m₂ are the masses of the two objects, and r is the distance between them.
F=[tex]\frac{(6.67)(10^{-11} )[(5.0)(10^{6})]^2}{(100)^2}N[/tex]
Step 1: Calculate the product of the masses:
[tex](5.0)(10^6)(5.0)(10^6) = 25(10^{12} )[/tex] kg²
Step 3: Calculate the square of the distance:
[tex]100^{2} m^{2}[/tex] = 10,000 m²
Step 4: Calculate the gravitational force:
F = [tex]\frac{(6.67)(10^{-11} )(25.0)(10^{12})}{(10,000)} N[/tex]
Step 5: Simplify the equation:
F = [tex](6.67)(25)10^{-11 + 12 - 4} N[/tex]
Step 6: Calculate the final value:
F ≈ [tex]167.5[/tex]×[tex]10^{-3}[/tex]≈ 167.5 N
To know more about the calculation of gravitational attraction visit:
https://brainly.com/question/28009700
#SPJ11
To cause sunburn on human skin by breaking a chemical bond within a skin cell, a photon with about
3.5 eV of energy is required. What is the required wavelength?
What is the wavelength?
The required wavelength to cause sunburn on human skin by breaking a chemical bond is 3.56 x 10⁻⁷ meters
How to calculate wavelength?Use the equation E=hc/λ, where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength.
First, convert the energy of the photon to joules (J) from electron volts (eV):
3.5 eV x 1.602 x 10⁻¹⁹ J/eV = 5.61 x 10⁻¹⁹ J
Next, substitute the values into the equation:
5.61 x 10¹⁹ J = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/λ
Solving for λ:
λ = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/(5.61 x 10⁻¹⁹ J) = 3.56 x 10⁻⁷ m
Therefore, the required wavelength is approximately 3.56 x 10⁻⁷ meters (or 356 nanometers), which falls in the ultraviolet (UV) region of the electromagnetic spectrum.
Find out more on sunburn here: https://brainly.com/question/26609703
#SPJ1
For what values of h and k does the linear system have infinitely many solutions?.
A linear system of equations has infinitely many solutions when the equations are dependent, meaning that one equation can be obtained by scaling or combining the other equations. In general, this occurs when the equations represent parallel lines or overlapping lines.
Consider a linear system of two equations:
Equation 1: ax + by = c
Equation 2: dx + ey = f
If these equations have infinitely many solutions, it means that the slopes of the lines represented by the equations are equal (a/b = d/e) and the y-intercepts are also equal (c/b = f/e).
Therefore, for the linear system to have infinitely many solutions, the coefficients of x and y in the equations must be proportional and the constants on the right side of the equations must also be proportional.
In terms of the variables h and k:
Equation 1: hx + ky = c1
Equation 2: dx + ey = c2
For the system to have infinitely many solutions, the coefficients h and d must be proportional (h/d = k/e) and the constants c1 and c2 must be proportional (c1/d = c2/e).
This condition can be simplified to:
h/d = k/e
So, for the linear system to have infinitely many solutions, h and k must be proportional to the respective coefficients d and e.
To know more about linear system refer here
https://brainly.com/question/26544018#
#SPJ11