Explanation:
M.A = load / Effort
efficiency = M.A/V.R X 100
75 = M.A / 4 X 100
75 = 25 X M.A
M.A = 75/25 = 3
M.A = load / effort
3 = 100/E
E = 100/3 = 33.333
A machine whose efficiency is 75% is used to lift a load of 100m. the effort needed to put into the machine is 33.33 meters if the velocity ratio is 4.
What is the mechanical advantage?Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.
Mechanical advantage = output force(load) /input force (effort)
Simple machines like static pulleys, as well as a movable pulleys, provide a great amount of mechanical advantage.
A machine whose efficiency is 75% is used to lift a load of 100m.calc if it has a velocity ratio of 4.
As we know that the mechanical advantage of a machine is equal to the product of its efficiency and velocity ratio.
mechanical advantage = velocity ratio ×Efficiency
=4 × 0.75
= 3
The mechanical advantage is 3 , which means the ratio of load to effort is 3
load / effort = 3
100 m/effort =3
effort = 33.33 m
Thus, the effort put into the machine comes out to be 33.33 m.
Learn more about Mechanical advantages, here
https://brainly.com/question/16617083
#SPJ5
What is the kinetic energy of a 36N toy car which is moving at 5 m/s?
9. Steradian is the angel which lies in:
a) One dimension
b) Two dimensions
Answer:
B
Explanation:
B
help pls will give brainiest :)
Answer:
use a flight sim
How does our body get heat ? Explain in short .
For class 5 plz bro i need help
Answer:
Thermogenesis:Your body's muscles, organs, and brain produce heat in a variety of ways
Explanation:
For example, muscles can produce heat by shivering. Hormonal thermogenesis: Your thyroid gland releases hormones to increase your metabolism. This increases the energy your body creates and the amount of heat it produces
cách đổi ev sang kj/mol
How do you explain this arrangement of fossils? What might have happened?
Answer:
The question lacks a photo to fully answer correctly
If the fossil has its neck bent backwards towards its back, that is the common way to which dinosaurs died.
If the fossil is scattered a bit from its other linking fossil pieces, than it is most likely that the dinosaur was a meal to a predator.
Fossils that are in array but are divided clearly at a section suggests that land moved. Possibly earthquake or Pangea took place.
Answer:
Peripatus, which lived around 570 MYA, is in the top layer of rock. The trilobites that lived later, between 498 MYA and 445 MYA, appear in the bottom layer. Based on superposition, younger layers of rock are expected to be on top. The rock layers have been overturned, placing the younger layer on the bottom.
Explanation:
actually answer plauto
Jasmine pushing her little brother on the swing the swing passes back-and-forth 14 times in 40 seconds what is the frequency of the motion and what is superior to the swing
Answer:
Explanation:
frequency f = 14 cycles/40 s
f = 0.35 cycles/s or
f = 0.35 Hz.
I suspect you are more concerned with the PERIOD of the swing rather than what is superior to it. (How would one even compare?)
T = 1/f = 1/0.35
T = 2.85714285...
T = 2.86 s
.5A and 4.5V what’s the resistance
Explanation:
[tex]V = IR \Rightarrow R = \dfrac{V}{I}[/tex]
Plugging in the numbers, we get
[tex]R=\dfrac{4.5\:\text{V}}{0.5\:\text{A}} = 9.0[/tex] ohms
A rock falls to the ground with a force of 300N and air resistance pushes back up on the rock with a
force of 45N. Which is true of the rock?
A There are balanced forces acting on the rock and the net force is 255N down
B. There are unbalanced forces acting on the rock and the net force is 255N down
C. There are balanced forces acting on the rock and the net force is 345N down
. There are unbalanced forces acting on the rock and the net force is 345N down
Answer:
c
Explanation:
If Brad drives 100 meters forwards and then 100 meters backwards, what is her
distance? Her displacement?
Answer:
0 because she went to exact same place as before
Content from magnets
Answer:
magnets are magnetic :)
Explanation:
I DO NOT WANT LINKES OR …………..
A 500 kg car is at rest at the top of a 72 m high hill. The car rolls to the bottom of the hill. At the bottom of the hill, the car has a speed of 25.6 m/s. Calculate the mechanical energy of the car at the top and bottom of the hill. (Assume the bottom of the hill has a height of 0 m, g=9.80 ms2/).
Explanation: Solution
1.
Gravitational potential energy
U=mgh=500*9.8*50
U=245000 J
2.
Kinetic energy is present at bottom of the hill
K=(1/2)mV2=(1/2)*500*27.82
K=193210 J
3.
Work done by friction
W=193210-245000=-51790 J
The mechanical energy at the top and bottom of the hill is equal to 352800 J and 163840 J respectively.
What is the kinetic energy and potential energy?Kinetic energy (KE) can be described as the energy possessed by a moving object due to its motion. Work by a body will be done to change the kinetic energy. The kinetic energy is represented as K.E = ½mv².
Potential energy (P.E) can be described as the energy that is stored by an object due to its position and is represented in the equation as P.E = mgh, where ‘m’ is the mass, ‘g’ is the acceleration due to gravity and ‘h’ is the height.
The mechanical energy = Kinetic energy + potential energy
Given, the mass of the car, m = 500 Kg
The height of the hill, h = 72 m
The velocity of the car, v = 25.6 m/s
At the top of the hill, the mechanical energy = potential energy
The potential energy at the top of the hill, = mgh
P. E. = 500 × 9.8 ×72
P.E. = 352800 J
At the bottom of the hill, the mechanical energy = kinetic energy
The kinetic energy of the car at the bottom of the hill,
K.E. = ½ × 500 (25.6)²
K.E. = 163840 J
Learn more about kinetic energy and potential energy, here:
brainly.com/question/15764612
#SPJ2
ALREADY SOLVED Thank you for looking.
Answer:
yes
Explanation:
Car A uses tires for which the coefficient of static friction is 0.384 on a particular unbanked curve. The maximum speed at which the car can negotiate this curve is 16.7 m/s. Car B uses tires for which the coefficient of static friction is 0.809 on the same curve. What is the maximum speed at which car B can negotiate the curve
helphelphelp due in 5 minutes answer the question below
In a vacuum light travels at which speed?
Answer:
Light traveling through a vacuum moves at exactly 299,792,458 meters (983,571,056 feet) per second. That's about 186,282 miles per second
Explanation:
A stimulus that increses the occurance of a response is called
Answer:
reinforcing stimulus
Explanation:
Think its correct
Answer:
reinforcing stimulus
Explanation:
because it increases the occurence of a response
A student is asked to calculate the centripetal acceleration of a hummingbird that makes a complete circle in 0.43 seconds. If the circle has a radius of 0.25 m, what is
the correct setup for determining the centripetal acceleration of the hummingbird?
(3.65m/s)2/0.25m
(3.65m/s)2-0.43
O (0.435)2 / 25m
O (0.432.25m
The centripetal acceleration of the hummingbird is [tex]\frac{(3.65)^2}{0.25} = 53.29 \ m/s^2[/tex]
The given parameters;
time of motion of the hummingbird, t = 0.43 sradius of the circle, r = 0.25 mnumber of revolution of the hummingbird = 1 rev per 0.43 sThe angular speed of the hummingbird is calculated as follows;
[tex]\omega = \frac{1 \ rev}{0.43 \ s} \times \frac{2\pi \ rad}{1 \ rev} =14.61 \ rad/s[/tex]
The linear speed of the hummingbird is calculated as follows;
v = ωr
v = 14.61 x 0.25
v = 3.65 m/s
The centripetal acceleration of the hummingbird is calculated as follows;
[tex]a_c = \frac{v^2}{r} \\\\a_c = \frac{(3.65)^2}{0.25} \\\\a_c = 53.29\ m/s^2[/tex]
Thus, the centripetal acceleration of the hummingbird is [tex]\frac{(3.65)^2}{0.25} = 53.29 \ m/s^2[/tex]
Learn more here:https://brainly.com/question/11700262
Which of the following statements is true?
a Penicillin is produced by fungal fermentation.
b
The effects of too much beer or wine can be
countered with antibiotics.
с
The deadly Death Cap mushroom can be treated
with penicillin.
d Antibiotics do not treat fungal diseases.
Answer:
a Penicillin is produced by fungal fermentation.
Explanation:
The industrial production of penicillin (PEN) occurs via fermentation using the filamentous fungus Penicillium chrysogenum
Penicillin G (benzylpenicillin) was first produced from a penicillium fungus that occurs in nature. The strain of fungus used today for the manufacture of penicillin G was created by genetic engineering to improve the yield in the manufacturing process.
Which of the following statements about migration is true?
a. Migration is always from one region to another.
b. Animals always migrate within a region.
c. Migration always negatively impacts an ecosystem.
d. Animals migrate for various reasons.
Answer:
A and D
b and C are false
Answer:
D. Animals migrate for various reasons.
Explanation:
Got it right on Edge 2023. : )
How long does it take light from a camera to travel to the face of someone standing 7 meters away?
The time taken for the light to travel from the camera to someone standing 7 m away is 2.33×10¯⁸ s
Speed is simply defined as the distance travelled per unit time. Mathematically, it is expressed as:
Speed = distance / timeWith the above formula, we can obtain the time taken for the light to travel from the camera to someone standing 7 m away. This can be obtained as follow:
Distance = 7 m
Speed of light = 3×10⁸ m/s
Time =?Time = Distance / speed
Time = 7 / 3×10⁸
Time = 2.33×10¯⁸ sTherefore, the time taken for the light to travel from the camera to someone standing 7 m away is 2.33×10¯⁸ s
Learn more: https://brainly.com/question/14988345
real answers only pls
Answer:
1. it spins
2. falls in a curve
3. falls flat on the floor
(a) Define the term ginning? (b) Name the simple device used for spinning?
A simple device used for spinning is a hand spindle also known as takli.
hope it helps
What process makes this pattern on the ocean floor?
A person on a bike (m = 90 kg) is traveling 4 m/s at the top of a 2 m hill. What is the biker's total energy?
a) 1,944 J
b) 2,484 J
c) 1,764 J
d) 720 J
Answer:
Explanation:
Total mechanical energy is
E = mgh + ½mv²
E = m(gh + ½v²)
E = 90(9.8(2.0) + ½4²)
E = 2,484 J answer b)
A person on a bike (m = 90 kg) is traveling 4 m/s at the top of a 2 m hill. the total energy of the biker would be 2484 Joules.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
As given in the problem a person on a bike (m = 90 kg) is traveling 4 m/s at the top of a 2 m hill.
The total kinetic energy of the biker
KE = 1/2 × m × v²
= 0.5 × 90 × 4²
= 720
Similarly, the total potential energy of the biker
PE = m × g × h
=90 × 9.8 × 2
= 1764 Joules
The total energy of the biker = 720 + 1764
= 2484 Joules
Thus, the total energy of the biker would be 2484 Joules .
Learn more about mechanical energy here, refer to the link gib
brainly.com/question/12319302
#SPJ2
You have a new goal of saving at least $4,500 over the course of the next year.
You already have $900 saved.
By how much would you need to increase your monthly net savings in order to meet this goal?
Answer:
You would need to save $300 every month to meet your savings goal.
Explanation:
4,500-900=3,600
3,600/12=300
Answer:
answer is 200
Explanation:
edge 2021
A__________ shows how velocity changes over time
The gravitational force between two objects is 2700 N. What will be the gravitational force between the objects if the distance between them triples?
F = GMm/r^2
So F is proportional to 1/r^2
F2 = 2700 x ( 1 / 3^2 ) = 300N
What is sustainability? How can we make sustainable development a reality? How sustainability can be measured?
Answer:
1)The ability to be maintained at a certain rate or amount is called sustainability.
3)Sustainability is measured by assessing performance of Social, Environmental, and Economic principles.
sorry but I don't know number 2.
I hope it will help you)):