To determine the change in energy of the capacitor when the dielectric material is removed, we need to calculate the initial and final energies and then find the difference between them.
The energy stored in a capacitor is given by the formula:
E = 0.5 * C * V^2
Given:
Capacitance (C) = 19.9 μF = 19.9 × 10^(-6) F
Voltage (V) = 65.8 V
Dielectric constant (κ) = 16.9
Let's first calculate the initial energy when the dielectric material is present:
Initial Energy (E_initial) = 0.5 * C * V^2
Next, we need to calculate the final energy after the dielectric material is removed. Since the dielectric constant is removed, the effective capacitance of the capacitor will change.
The new capacitance without the dielectric can be calculated using the equation:
C_new = C / κ
Now we can calculate the final energy:
Final Energy (E_final) = 0.5 * C_new * V^2
To find the change in energy:
ΔE = E_final - E_initial
Let's perform the calculations:
E_initial = 0.5 * (19.9 × 10^(-6)) * (65.8)^2
C_new = (19.9 × 10^(-6)) / 16.9
E_final = 0.5 * C_new * (65.8)^2
ΔE = E_final - E_initial
Calculating ΔE will give us the change in energy of the capacitor.
Please note that the result will be provided in units of mJ (mili joules) with two decimal places.
To know more about "Capacitance" refer here:
brainly.com/question/29591088#
#SPJ11
A 4.50 × 10 5 -kg subway train is brought to a stop from a speed of 0.5 m/s in 0.4 m by a large spring bumper at the end of its track. What is the force constant k of the spring?
The force constant of the spring is [tex]-7.03 * 10^5 N/m[/tex] calculated using the force applied to the subway train during the deceleration process.
The force applied to the subway train can be determined using Newton's second law, which states that force (F) is equal to mass (m) multiplied by acceleration (a). In this case, the acceleration can be calculated using the formula
[tex]a = (v^2 - u^2) / (2s)[/tex],
where v is the final velocity (0 m/s), u is the initial velocity (0.5 m/s), and s is the distance travelled (0.4 m).
First, calculate the acceleration:
[tex]a = (0 - 0.5^2) / (2 * 0.4) = -0.625 m/s^2[/tex]
Next, calculate the force using Newton's second law:
[tex]F = m * a = 4.50 * 10^5 kg * -0.625 m/s^2 = -2.81 * 10^5 N[/tex]
Since the force exerted by the spring is equal in magnitude and opposite in direction to the force applied to the subway train, the force constant of the spring (k) can be calculated using Hooke's law:
F = -k * x,
where x is the displacement (0.4 m).
Rearranging the equation,
[tex]k = F / x = (-2.81 * 10^5 N) / (0.4 m) = -7.03 * 10^5 N/m[/tex]
Therefore, the force constant of the spring is [tex]-7.03 * 10^5 N/m[/tex].
Learn more about force constants here:
https://brainly.com/question/32547816
#SPJ11
In a lab, a group of physics students produces a standing wave with three segments in a 4.5 meter long piece of rope. If the rope undergoes 20 cycles in 7.7 seconds and has a mass of 2.9 kg, what is the tension in the rope?
2.
A piano has numerous metal wires each tightened to produce specific tones. Because the wires are screwed down at each end, each end is effectively a node. The wire that creates a tone on the piano is under 704 N of tension that is 0.684 meters long and mass of 4 grams.
What is the wavelength of the tone? Answer to 3 sig figs.
The tension in the rope producing a standing wave with three segments is approximately 524.04 N. The wavelength of the tone created by the piano wire under 704 N of tension is approximately 2.68 meters.
To find the tension in the rope, we can use the formula for the speed of a wave on a string: v = √(T/μ), where v is the wave speed, T is the tension, and μ is the linear mass density of the rope.
The linear mass density is given by μ = m/L, where m is the mass of the rope and L is the length. Rearranging the equation, we have T = [tex]v^2[/tex] * μ. The wave speed can be calculated as v = λf, where λ is the wavelength and f is the frequency.
Since the rope has three segments, the wavelength is equal to 3 times the length of each segment, which is L/3. The frequency can be found as f = 1/T, where T is the time for 20 cycles. Plugging in the given values, we can calculate the tension T in the rope.
The wavelength of the tone produced by the piano wire can be found using the formula for the wave speed on a string: v = √(T/μ), where v is the wave speed, T is the tension, and μ is the linear mass density of the wire.
The linear mass density is given by μ = m/L, where m is the mass of the wire and L is its length. Rearranging the equation, we have T = [tex]v^2[/tex] * μ. The wave speed can be calculated as v = λf, where λ is the wavelength and f is the frequency.
The tension T is given as 704 N, and the length L of the wire is 0.684 meters. We need to find the mass of the wire to calculate μ. Given that the mass is 4 grams, we convert it to kilograms. Plugging in the given values, we can solve for the wavelength λ.
Learn more about wavelength here ;
ttps://brainly.com/question/32112795
#SPJ11
Fill in the Blanks Type your answers in all of the blanks and submit ⋆⋆ A typical supertanker has a mass of 2.0×10 6
kg and carries oil of mass 4.0×10 6
kg. When empty, 9.0 m of the tanker is submerged in water. What is the minimum water depth needed for it to float when full of oil? Assume the sides of the supertanker are vertical and its bottom is flat. m
The minimum water depth required for a supertanker to float when full of oil is approximately 13.5 meters.
To determine the minimum water depth needed for the supertanker to float when full of oil, we need to consider the concept of buoyancy. According to Archimedes' principle, an object submerged in a fluid experiences an upward buoyant force equal to the weight of the fluid it displaces.
When empty, 9.0 meters of the supertanker is submerged in water. This means that the weight of the water displaced by the empty tanker is equal to the weight of the tanker itself. Therefore, the buoyant force acting on the empty tanker is sufficient to support its weight.
Now, when the tanker is filled with oil, it gains an additional mass of 4.0×10^6 kg. To remain afloat, the buoyant force acting on the tanker must be equal to the combined weight of the tanker and the oil it carries. The buoyant force depends on the volume of water displaced, which in turn depends on the depth to which the tanker sinks.
Since the buoyant force must equal the combined weight of the tanker and the oil, we can set up the equation:
Buoyant force = Weight of tanker + Weight of oil
The weight of the tanker can be calculated as the product of its mass (2.0×10^6 kg) and the acceleration due to gravity (9.8 m/s^2). Similarly, the weight of the oil is the product of its mass (4.0×10^6 kg) and the acceleration due to gravity.
By rearranging the equation and solving for the water depth, we find that the minimum depth required for the tanker to float when full of oil is approximately 13.5 meters.
Learn more about Archimedes' principle:
https://brainly.com/question/787619
#SPJ11
Two copper wires A and B have the same length and are connected across the same battery. If RB - 9Ra, determine the following. HINT (a) the ratio of their cross-sectional areas AB (b) the ratio of their resistivities PB PA (c) the ratio of the currents in each wire IB
Answer: (A) Therefore, the ratio of their resistivities PB/PA is= 9/1 = 9.
(B) The ratio of the currents in each wire IB/IA is 1/9.
(A) Given that two copper wires A and B have the same length and are connected across the same battery, RB - 9Ra.The ratio of their cross-sectional areas is:
AB = Rb/Ra + 1
= 9/1 + 1 = 10.
Therefore, the ratio of their cross-sectional areas AB is 10. The resistance of the wire can be given as:
R = pL/A,
where R is the resistance, p is the resistivity of the material, L is the length of the wire and A is the cross-sectional area of the wire. A = pL/R.
Therefore, the ratio of their resistivities PB/PA is = 9/1 = 9.
(B) The current in the wire is given by the formula: I = V/R, where I is the current, V is the voltage and R is the resistance. Therefore, the ratio of the currents in each wire IB/IA is:
IB/IA
= V/RB / V/RAIB/IA
= RA/RBIB/IA
= 1/9.
Therefore, the ratio of the currents in each wire IB/IA is 1/9.
Learn more about resistivity: https://brainly.com/question/13735984
#SPJ11
The ratio of the cross-sectional areas of the copper wires is 9:1. The ratio of the resistivities of the copper wires is 9:1. The ratio of the currents in each wire is 1:9.
Explanation:To determine the ratio of the cross-sectional areas of the copper wires, we can use the formula A = (pi)r^2, where A is the cross-sectional area and r is the radius.
Since the wires have the same length, their resistance will be inversely proportional to their cross-sectional areas. So, if RB = 9Ra, then the ratio of their cross-sectional areas is AB:AA = RB:RA = 9:1.
The ratio of the resistivities of the copper wires can be found using the formula p = RA / L, where
p is the resistivityR is the resistanceL is the length.Since the wires have the same length, their resistivities will be directly proportional to their resistances.
So, if RB = 9Ra,
he ratio of their resistivities is PB:PA = RB:RA = 9:1.
The ratio of the currents in each wire can be found using Ohm's law, which states that I = V / R, where
I is the currentV is the voltageR is the resistanceSince the wires have the same voltage applied, their currents will be inversely proportional to their resistances.
So, if RB = 9Ra
he ratio of the currents in each wire is IB:IA = RA:RB = 1:9.
Learn more about Ratio of cross-sectional areas, resistivities, and currents in copper wires here:https://brainly.com/question/32890210
#SPJ11
A uniform solid cylinder rolls without slipping along a horizontal surface. Calculate the ratio E/E rot,
where E rot
is the rotational kinetic energy and E is the total kinetic energy. a. 10 b. 4 C. 5 d. 2 e. 3
The ratio [tex]E/E_rot[/tex] is equal to 1, which means that both the translational and rotational kinetic energies of the rolling cylinder are similar.
The problem involves calculating the ratio
[tex]E/E_rot[/tex], where [tex]E_rot[/tex]
represents the rotational kinetic energy, and E is the total kinetic energy of a uniform solid cylinder rolling without slipping on a horizontal surface.
When a solid cylinder rolls without slipping, it possesses translational and rotational kinetic energy. The total kinetic energy, E, is the sum of these two energies. The rotational kinetic energy,[tex]E_rot[/tex], can be calculated using the formula
[tex]E_rot = (1/2) * I * ω²[/tex]
, where I is the moment of inertia of the cylinder and ω is the angular velocity.For a solid cylinder, the moment of inertia about its central axis is given by
[tex]I = (1/2) * m * r²[/tex]
, where m is the mass of the cylinder and r is its radius.The translational kinetic energy is given by
[tex]E_trans = (1/2) * m * v²[/tex], where v is the linear velocity.Since the cylinder is rolling without slipping, the linear velocity v is related to the angular velocity ω by the equation
[tex]v = r * ω[/tex].
Substituting this into the formula for[tex]E_trans[/tex] gives [tex]E_trans = (1/2) * m * (r * ω)² = (1/2) * m * r² * ω² = (1/2) * I * ω²[/tex], which is the same as [tex]E_rot[/tex]
Learn more about rotational kinetic energies here
brainly.com/question/30459585
#SPJ11
A large tank is filled with water to a depth of 15m. A spout located 10.0 m above the bottom of the tank is then opened. With what speed will water emerge from the spout?
using the Bernoulli's equation
The task is to determine the speed at which water will emerge from a spout located 10.0 m above the bottom of a large tank filled with water to a depth of 15 m. This can be done using Bernoulli's equation, which relates the pressure, velocity, and height of a fluid in a steady flow situation.
Bernoulli's equation states that the sum of the pressure energy, kinetic energy, and gravitational potential energy per unit volume of a fluid remains constant along a streamline in steady flow. In this case, we can consider two points along the streamline: the surface of the water in the tank and the spout.
At the surface of the water in the tank, the pressure is atmospheric pressure, and the velocity and height are both zero. At the spout, the pressure is still atmospheric pressure, but the velocity and height are non-zero. By applying Bernoulli's equation between these two points, we can solve for the velocity of the water at the spout.
The equation can be written as: P + 0.5ρv^2 + ρgh = constant
Since the pressure and height at both points are the same, they cancel out, and the equation simplifies to: 0.5ρv^2 + ρgh = 0.5ρv_0^2, where v_0 is the velocity of the water at the surface of the tank (which is zero).
Rearranging the equation, we get: v = √(2gh), where v is the velocity of the water at the spout, g is the acceleration due to gravity, and h is the height difference between the spout and the surface of the water.
By substituting the given values of h = 10.0 m and using the value of g, we can calculate the speed at which the water will emerge from the spout.
Learn more about Bernoulli's equation here:
https://brainly.com/question/13093946
#SPJ11
"Experiment 3:Measurement experiment of gas-phase diffusion
coefficient
Q3-1: What is the approximate partial pressure of component A in
the horizontal
section of the nozzle of the diffusion pipe? Why is that"?
The partial pressure of component A in the horizontal section of the nozzle of the diffusion pipe is about 0.3 atm.
Experiment 3: Measurement experiment of gas-phase diffusion coefficientGas-phase diffusion is a process of gas molecules' movement through space. The rate of gas-phase diffusion can be quantified using Fick's Law. The purpose of this experiment is to determine the diffusion coefficient of two components (A and B) in a gas mixture using the separation method.The approximate partial pressure of component A in the horizontal section of the nozzle of the diffusion pipe is about 0.3 atm.
The partial pressure of the component A is proportional to the height of the solution in the tube. When the gas mixture enters the diffusion tube, the component A vapor enters the tube with a partial pressure of 0.3 atm. The vapor phase of component A is transported by the carrier gas to the separation column. After that, the vapor of component A was separated and detected using the method of gas chromatography.
This experiment enables students to identify gas molecules' rates of movement through space. It provides the experience of using sophisticated equipment to measure gas properties and the use of mathematical models to interpret experimental data.In conclusion, the partial pressure of component A in the horizontal section of the nozzle of the diffusion pipe is about 0.3 atm.
Learn more about diffusion here,
https://brainly.com/question/94094
#SPJ11
A rock is suspended by a light string. When the rock is in air, the tension in the string is 41.5 NN . When the rock is totally immersed in water, the tension is 25.1 NN . When the rock is totally immersed in an unknown liquid, the tension is 20.0 NN .
Part A
What is the density of the unknown liquid?
Let's determine the density of the unknown liquid.
Step 1:Calculate the weight of the rockThe tension in the string while the rock is in the air= 41.5 NFrom the Newton's second law,Force= mass x accelerationTherefore, Force due to gravity= mass x acceleration due to gravity= weight of rock= mgwhere m is mass of rockg is the acceleration due to gravity= 9.8 m/s²Weight of rock= 41.5 N (given)
Step 2:Calculate the weight of the rock when it is in waterThe tension in the string when the rock is in water= 25.1 NThe weight of rock when it is in water= (Tension in string while in air) - (Tension in string while in water)= 41.5 - 25.1= 16.4 N
Step 3:Calculate the weight of the rock when it is immersed in the unknown liquidThe tension in the string when the rock is immersed in unknown liquid= 20.0 NThe weight of rock when it is in the unknown liquid= (Tension in string while in air) - (Tension in string while in unknown liquid)= 41.5 - 20.0= 21.5 N
Step 4:Calculate the buoyant force on the rock when it is in waterThe buoyant force on rock when it is in water= Weight of rock when it is in air - weight of rock when it is in water= 41.5 - 16.4= 25.1 NThe buoyant force on the rock when it is in the unknown liquid= Weight of rock when it is in air - weight of rock when it is in unknown liquid= 41.5 - 21.5= 20.0 N
Step 5:Calculate the volume of the rockTo calculate the density of the unknown liquid, we need to calculate the volume of the rock. For this, we can use Archimedes' principle.Archimedes' principle: The buoyant force on a body equals the weight of the fluid it displaces. We know the buoyant force on the rock when it is in water and in the unknown liquid, respectively.
Buoyant force= weight of displaced liquidVolume of rock = (Buoyant force in air)/ (Density of air) = (Weight of rock in air)/ (Density of air) = (41.5 N)/(1.29 kg/m³) = 32.2 x 10⁻³ m³
Step 6:Calculate the density of the unknown liquidDensity of the unknown liquid= (Weight of rock in air - weight of rock in unknown liquid)/ (Weight of fluid displaced)= (41.5 N - 21.5 N)/ (25.1 N - 20.0 N)= 20.0 N/ 5.1 N= 3.92 kg/m³The density of the unknown liquid is 3.92 kg/m³.
Learn more about Density here,
https://brainly.com/question/1354972
#SPJ11
The hot resistance of a flashlight bulb is 2.80Ω, and it is run by a 1.58 V alkaline cell having a 0.100Ω internal resistance. (a) What current (in A) flows? ___________ A (b) Calculate the power (in W) supplied to the bulb using I²Rbulb.
_________ W (c) Is this power the same as calculated using V2/Rbulb (where V is the voltage drop across the bulb)? O No O Yes
(a) The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb is 0.746 W.
(c) No, this power is not the same as the power calculated using I²Rbulb
The hot resistance of a flashlight bulb is 2.80Ω,
Voltage is 1.58 V
Internal resistance is 0.100Ω .
(a) The current flowing through the circuit is given by:
I = (V - Ir) / R
where
V is the voltage of the cell,
Ir is the internal resistance of the cell and
R is the resistance of the bulb.
I = (1.58 - 0.1) / 2.8I
= 0.518 A
The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb can be calculated as
P = I²R
= 0.518² × 2.8P
= 0.746 W
The power supplied to the bulb is 0.746 W.
(c) The voltage drop across the bulb is given by:
V = IR
V = 0.518 × 2.8
V = 1.4544 V
The power supplied to the bulb can also be calculated as:
P = V² / R
P = (1.4544)² / 2.8
P = 0.753 W
No, this power is not the same as the power calculated using I²Rbulb. It's because of the difference in the voltage across the bulb due to the internal resistance of the cell.
Learn more about the current:
brainly.com/question/2248465
#SPJ11
Tarzan, who has a mass of 75 kg, holds onto the end of a vine that is at a 13 ∘ angle from the vertical. He steps off his branch and, just at the bottom of his swing, he grabs onto his chimp friend Cheetah, whose mass is 45 kg.
What is the maximum angle the rope reaches as tarzan swings to the other side? Express your answer in degrees.
The calculated angle, 9.6°, represents the requested maximum angle.
To find the maximum angle the rope reaches as Tarzan swings to the other side, we can use the conservation of energy and momentum principles.
Let m be the mass of Tarzan (75 kg), m' be the mass of his friend Cheetah (45 kg), L be the length of the vine, and i be the initial angle of the vine with the vertical (13°).
The initial height from where Tarzan steps off the vine is given by [tex]\rm \( h_i = L - L \cos(i) \)[/tex].
Using the conservation of energy from the top to the bottom of the swing, Tarzan's initial speed [tex]\rm (\( v_i \))[/tex] is found to be [tex]\rm \( v_i = \sqrt{2g(L - L \cos(i))} \)[/tex].
After grabbing Cheetah, the final angle f and the final height [tex]\rm (\( h_f \))[/tex] are related by [tex]\rm \( h_f = L - L \cos(f) \)[/tex].
Applying conservation of energy from the bottom back to the top, Tarzan's final speed [tex]\rm (\( v_f \))[/tex] is found to be [tex]\rm \( v_f = \sqrt{2g(L - L \cos(f))} \)[/tex].
Conservation of momentum at the bottom gives [tex]\rm \( m v_i = (m + m') v_f \)[/tex], which can be rearranged to find the angle f.
Solving these equations yields f = 9.6° as the maximum angle the rope reaches.
The calculated angle, 9.6°, represents the requested maximum angle.
Know more about momentum principles:
https://brainly.com/question/30275950
#SPJ12
Orientation of two limbs of a fold is determined as:
30/70SE and 350/45NW
1. Determine orientation of fold axis
2. Determine pitch of the fold axis on both limbs
3. Determine angle between two limbs
4. Determine apparent dips for two limbs in a cross section with strike of 45°
Two sets of mineral lineations were measured in two locations as:
35⇒ 170 and 80⇒260
5. Determine orientation of the plane containing these lineations
6. Determine angle between two sets of lineations
The answer to the question is given below:
1. The orientation of fold axis is determined by the intersection of two limbs.
.2. The pitch of the fold axis is calculated from the intersection of fold axis and the bed.
.3. The angle between the two limbs is determined by using the intersection line and trending lines of limbs.
4. In a cross-section, apparent dips are calculated for both limbs with strike of 45°.
5. The orientation of the plane containing these lineations is determined by using the intersection of two linear features and the trending lines of linear features.
6. The angle between the two sets of lineations is calculated using the direction of the two sets of lineations.
Learn more about lineations
https://brainly.com/question/29047939
#SPJ11
1. The average trend of the fold axis is 180°, and the average plunge is 57.5°.
The pitch of the fold axis on the first limb is 20°, and on the second limb, it is 45°.
3. The angle between the two limbs is 320°.
4. The apparent dip for the first limb is calculated using true dip * cos(15°), and for the second limb, it is true dip * cos(55°).
5. The average trend of the plane containing the lineations is 57.5°, and the average plunge is 215°.
6. The angle between the two sets of lineations is 45°.
1. To determine the orientation of the fold axis, we need to find the average trend and plunge of the limbs. The trend is the compass direction of the line formed by the intersection of the axial plane with the horizontal plane, while the plunge is the angle between the axial plane and the horizontal plane.
For the first limb with an orientation of 30/70SE, the trend is 30° clockwise from east, and the plunge is 70°. For the second limb with an orientation of 350/45NW, the trend is 350° clockwise from north, and the plunge is 45°.
To find the average trend, we add the two trends together and divide by 2: (30 + 350) / 2 = 180°. So, the average trend is 180°.
To find the average plunge, we add the two plunges together and divide by 2: (70 + 45) / 2 = 57.5°. So, the average plunge is 57.5°.
Therefore, the orientation of the fold axis is 180/57.5.
2. The pitch of the fold axis on both limbs can be calculated by subtracting the plunge of the axial plane from 90°. For the first limb, the pitch is 90° - 70° = 20°. For the second limb, the pitch is 90° - 45° = 45°.
3. The angle between the two limbs can be calculated by subtracting the trend of one limb from the trend of the other limb. In this case, it is 350° - 30° = 320°.
4. To determine the apparent dips for the two limbs in a cross section with a strike of 45°, we need to find the angle between the strike and the trend of each limb. The apparent dip can then be calculated using the formula: apparent dip = true dip * cos(angle between strike and trend).
For the first limb, the angle between the strike and the trend is 45° - 30° = 15°. Let's assume the true dip of the first limb is 60°. Using the formula, the apparent dip for the first limb is 60° * cos(15°).
For the second limb, the angle between the strike and the trend is 45° - 350° = -305° (or 55° clockwise from south). Let's assume the true dip of the second limb is 45°. Using the formula, the apparent dip for the second limb is 45° * cos(55°).
5. To determine the orientation of the plane containing the two sets of mineral lineations, we need to find the average trend and plunge of the lineations.
For the first set with an orientation of 35⇒ 170, the trend is 35° clockwise from north, and the plunge is 170°. For the second set with an orientation of 80⇒260, the trend is 80° clockwise from north, and the plunge is 260°.
To find the average trend, we add the two trends together and divide by 2: (35 + 80) / 2 = 57.5°. So, the average trend is 57.5°.
To find the average plunge, we add the two plunges together and divide by 2: (170 + 260) / 2 = 215°. So, the average plunge is 215°.
Therefore, the orientation of the plane containing the lineations is 57.5/215.
6. The angle between the two sets of lineations can be calculated by subtracting the trend of one set from the trend of the other set. In this case, it is 80° - 35° = 45°.
Learn more about average plunge
https://brainly.com/question/31107282
#SPJ11
What does it mean when white light is diffracted and at a particular location the color seen is blue?
Answer:
When white light is diffracted and at a particular location , the color seen is blue, this means that blue color is reflected while all other colors are absorbed or diffracted . This phenomenon is due to the absorbance of wavelengths of all other colors except blue.
Explanation:
Assume the circuit in the picture is part of a third-order low-pass Butterworth filter having a passband gain of 6. Implement the gain of 6 in the second- order section of the filter. (Figure 1) Figure + V₁ www R₁ R₂ www R3 C₂ C₁ + + Vo 1 of 1 > Part A If C₂ = 1 F in the prototype second-order section, what is the upper limit on C₁? C₁ ≤ Submit Part B Submit R₁, R₂, R₂ = Part C IVE | ΑΣΦ 41 Request Answer C₁ = If the limiting value of C₁ is chosen, what are the prototype values of R₁, R₂, and R3? Express your answers, separated by commas. Submit 15. ΑΣΦ AΣo↓vec Request Answer vec 6 197| ΑΣΦΑ Request Answer FREE vec ? If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, calculate the scaled value of C₁. P Pearson F P ? ? Ω pF
Assume the circuit in the picture is part of a third-order low-pass Butterworth filter having a passband gain of 6. Implement the gain of 6 in the second- order section of the filter. (Figure 1) Figure + V₁ m R₁ {R₂ m R3 TC₂ C₁ to. to+ + Vo 1 of 1 Part D If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, calculate the scaled values of R₁, R₂, and R3. Express your answers, separated by commas. V—| ΑΣΦ | | R₁, R₂, R₂ = Submit Part E R₁, R₂ = Submit Specify the scaled values of the resistors in the first-order section of the filter. Express your answers, separated by a comma. Part F Request Answer C' = Submit 15. ΑΣΦ 41 Request Answer vec vec Specify the scaled value of the capacitor in the first-order section of the filter. Request Answer V || ΑΣΦ ||| vec 6 P Pearson B B ? ? ? nF 5 ΚΩ ΚΩ
The correct answers are (a) the upper limit on C₁ is 1 F ; (b) the prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ ; (c) the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ ; (d) if the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively ; (e) the scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω ; (f) the scaled value of the capacitor in the first-order section of the filter is 10 nF
Part A:
If C₂ = 1 F in the prototype second-order section, then the upper limit on C₁ is 1 F as well. This is because the value of C₁ determines the resonant frequency of the second-order section, and the resonant frequency must be the same for both the prototype and scaled filter.
Part B:
The prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ, respectively. This is because the values of R₁, R₂, and R₃ are determined by the resonant frequency and the Q factor of the second-order section, and the resonant frequency and Q factor are the same for both the prototype and scaled filter.
Part C:
If the limiting value of C₁ is chosen, then the value of C₁ is 1 F. This means that the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ.
Part D:
If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively. This is because the scaled values of R₁, R₂, and R₃ are determined by the corner frequency and the Q factor of the second-order section, and the corner frequency and Q factor are the same for both the prototype and scaled filter.
Part E:
The scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω. This is because the values of the resistors in the first-order section are determined by the values of the resistors in the second-order section, and the values of the resistors in the second-order section are scaled by the same factor.
Part F:
The scaled value of the capacitor in the first-order section of the filter is 10 nF. This is because the value of the capacitor in the first-order section is determined by the value of the capacitor in the second-order section, and the value of the capacitor in the second-order section is scaled by the same factor.
Thus, the correct answers are (a) the upper limit on C₁ is 1 F ; (b) the prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ ; (c) the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ ; (d) if the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively ; (e) the scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω ; (f) the scaled value of the capacitor in the first-order section of the filter is 10 nF.
To learn more about resonant frequency :
https://brainly.com/question/28168744
#SPJ11
normal vector to the plane of the coil makes an angle of 21 ∘
with the horizontal, what is the magnitude of the net torque acting on the coil?
Therefore, the magnitude of the net torque acting on the coil is τ = Iα = (1/2)MR²(F/M)sin(θ) = (1/2)RFsin(θ). Answer: 1/2RFsin(θ)
In physics, torque is the measure of the force that rotates an object about an axis or pivot. It is a vector quantity that is defined as τ = r × F, where r is the moment arm vector that points from the axis of rotation to the point of application of the force F, and × represents the vector product. The net torque acting on an object is the sum of all the torques acting on it. If the normal vector to the plane of the coil makes an angle of 21∘ with the horizontal, then the magnitude of the net torque acting on the coil can be found using the equation τ = Iα, where I is the moment of inertia of the coil and α is its angular acceleration. The moment of inertia of the coil depends on its geometry and mass distribution. If the coil is a uniform disk of radius R and mass M, then I = 1/2 MR².
Assuming that the coil is rotating about its axis perpendicular to the plane of the coil, then its angular acceleration can be related to its linear acceleration by α = a/R, where a is the linear acceleration of a point on the rim of the disk. If the coil is subjected to a net force F along a direction perpendicular to the plane of the coil, then a = F/M. Thus, α = F/(MR). The torque τ due to this force is τ = RF sin(θ), where θ = 21∘ is the angle between the normal vector to the plane of the coil and the horizontal. Thus, τ = R²F sin(θ)/(MR) = R(F/M)sin(θ) = aRsin(θ). Therefore, the magnitude of the net torque acting on the coil is τ = Iα = (1/2)MR²(F/M)sin(θ) = (1/2)RFsin(θ). Answer: 1/2RFsin(θ).
To know more about coil visit:
https://brainly.com/question/28941185
#SPJ11
A converging lens forms an image 16.0 cm from the line of symmetry with a -2.50 magnification. How far is the object from the image?
The object is located 4.0 cm from the image formed by the converging lens. The object is 22.4 cm from the image formed by the converging lens.
For determining the distance between the object and the image formed by the converging lens, lens formula is used:
[tex]1/f = 1/v - 1/u[/tex] ,
where f is the focal length of the lens, v is the distance of the image from the lens, and u is the distance of the object from the lens. In this case, since the magnification (m) is given, the magnification formula used:
[tex]m = -v/u[/tex].
Given that the magnification (m) is -2.50, substituting it into the magnification formula:
[tex]-2.50 = -v/u[/tex]
Simplifying the equation,
[tex]v = 2.50u[/tex]
Given that the image is formed 16.0 cm from the line of symmetry. Therefore, substituting v = 16.0 cm into the equation:
[tex]16.0 cm = 2.50u[/tex]
Solving for u,
[tex]u = 16.0 cm / 2.50 = 6.4 cm[/tex]
Thus, the object is located 6.4 cm from the lens. However, the distance between the object and the image is the sum of the distances from the object to the lens (u) and from the lens to the image (v). Therefore, the distance between the object and the image is:
[tex]u + v = 6.4 cm + 16.0 cm = 22.4 cm[/tex].
Hence, the object is 22.4 cm from the image formed by the converging lens.
Learn more about converging lens here:
rainly.com/question/29178301
#SPJ11
2) Does a rocket need the Earth, the launch pad, or the Earth's
atmosphere (or more than one of these) to push against to create
the upward net force on it? If yes to any of these, explain your
answer
"yes." Rockets need to push against the Earth's atmosphere to create an upward net force on it. Furthermore, the rocket requires a launch pad to stay in position while building up pressure.
The earth's atmosphere is necessary for the rocket to push against. The gases that make up the atmosphere exert pressure on everything in it, including rockets. For the rocket to move upwards, it needs to create an upward force that is larger than the force of gravity pulling it downwards. This upward force can be created by burning fuel and expelling the gases through the nozzle at the bottom of the rocket. The expelled gases push against the atmosphere, generating an equal and opposite reaction that pushes the rocket upwards.The launch pad is equally crucial as it provides the rocket with a firm base while it builds up pressure. When the rocket engines are ignited, a large amount of energy is released, resulting in a powerful explosion. The rocket needs to be anchored to the ground to avoid being pushed back or toppled over by the force of the blast. It is why launch pads are specially designed with massive concrete and steel structures that keep the rocket in place until it can lift-off safely.
A rocket requires the Earth's atmosphere and a launch pad to push against to create an upward net force. Without these two, the rocket cannot take off or achieve its desired altitude.
To know more about atmosphere visit:
brainly.com/question/32274037
#SPJ11
How can astronomers make observations that penetrate the cosmic dust which limits our view of the Galaxy through the disk? By using ultraviolet telescopes. By using radio telescopes. By observing globular clusters. Question 21 If an O-type star and our galaxy were at the same distance, which would have a greater magnitude? The O-type star The Galaxy Insufficient information to say Question 22 Which of the below is a possible evolutionary outcome for the Sun (given in the correct chronological order). planetary nebula, red giant, white dwarf Red giant, planetary nebula, white dwarf Red giant, planetary nebula, neutron star Red giant, neutron star with simultaneous supernova explosion Red giant, black hole with simultaneous supernova explosion
Astronomers make observations that penetrate the cosmic dust which limits our view of the Galaxy through the disk by using radio telescopes as it is one of the best ways to peer into the universe.
Radio telescopes can easily penetrate the cosmic dust in the galaxy, making it possible for astronomers to see through the dust and view the galaxy in ways that are impossible to see with visible light.Radio telescopes allow astronomers to see through gas and dust that are present between the stars and galaxies.
They are used to study the universe's radio waves. Radio telescopes pick up the radio waves emitted by stars and galaxies, and these waves can be used to create images of the universe.
Astronomers use a variety of techniques to peer through the cosmic dust that limits our view of the galaxy through the disk. Radio telescopes are one of the best ways to peer into the universe. Radio telescopes can easily penetrate the cosmic dust in the galaxy, making it possible for astronomers to see through the dust and view the galaxy in ways that are impossible to see with visible light.Radio telescopes are used to study the universe's radio waves. Radio waves are emitted by many objects in the universe, including stars and galaxies. Radio telescopes pick up these waves and use them to create images of the universe.
The images produced by radio telescopes are often more detailed than those produced by visible light telescopes because radio waves are less affected by the dust and gas present in the universe.Globular clusters are also used to study the universe. Globular clusters are large groups of stars that are located outside the Milky Way galaxy. These clusters are some of the oldest objects in the universe and provide astronomers with valuable information about the early universe.
Observing globular clusters allows astronomers to study the chemical makeup of the universe and the conditions that existed in the early universe.If an O-type star and our galaxy were at the same distance, the O-type star would have a greater magnitude. This is because O-type stars are very bright and emit a lot of light.
Magnitude is a measure of the brightness of a star, with brighter stars having a lower magnitude. O-type stars are among the brightest stars in the universe, so they have a lower magnitude than the Milky Way galaxy.The possible evolutionary outcome for the Sun, given in the correct chronological order, is planetary nebula, white dwarf. As the Sun gets older, it will eventually expand into a red giant.
After that, it will shrink down into a planetary nebula and eventually a white dwarf. Planetary nebulae are formed when a red giant sheds its outer layers of gas and dust. The remaining core of the star becomes a white dwarf, which is a very dense object that emits a small amount of light and heat.
Astronomers use different techniques to study the universe and peer through cosmic dust. Radio telescopes, globular clusters, and other methods are some of the ways astronomers use to study the universe. Magnitude is a measure of the brightness of a star, with brighter stars having a lower magnitude.
O-type stars are the brightest stars in the universe. The possible evolutionary outcome for the Sun is planetary nebula and white dwarf, as it expands into a red giant before it shrinks down into a planetary nebula and eventually a white dwarf.
To know more about Globular clusters :
brainly.com/question/33444922
#SPJ11
The orbit of a planet is a very squished ellipse. Its eccentricity is closest to
a) unknown
b) 0
c) 1
The orbit of a planet is a very squished ellipse. Its eccentricity is closest to b) 0. An ellipse is a shape that is not a perfect circle. An ellipse has two foci instead of one, and a planet orbits one of the foci.
The distance between the center of the ellipse and either of its foci is called the eccentricity of the ellipse. It ranges between 0 and 1. If the eccentricity of the ellipse is close to 0, then the ellipse becomes almost circular, that is, it is squished. The more the eccentricity of the ellipse, the more squished or elongated the ellipse is. Therefore, option b) 0 is the answer.
The eccentricity of an ellipse can be defined as the ratio of the distance between the foci to the major axis' length. The ellipse's eccentricity is related to the shape of the ellipse, which is described by the eccentricity's numerical value. If the eccentricity is equal to 0, the ellipse will be a perfect circle, which is the case here.
To learn more about eccentricity, refer:-
https://brainly.com/question/30650089
#SPJ11
A positive point charge (q = +9.78 × 10-8 C) is surrounded by an equipotential surface A, which has a radius of rA = 2.99 m. A positive test charge (q0 = +4.69 × 10-11 C) moves from surface A to another equipotential surface B, which has a radius rB. The work done by the electric force as the test charge moves from surface A to surface B is WAB = -5.60 × 10-9 J. Find rB.
The work done by the electric force as a positive test charge moves from one equipotential surface to another is given. the radius of the second equipotential surface, rB, is 0 meters
The work done by the electric force can be calculated using the formula W = q0(VB - VA), where q0 is the test charge and VB and VA are the potentials at surfaces B and A, respectively. Since the movement is from surface A to surface B, the work done is given as [tex]WAB = -5.60 * 10^-^9 J[/tex].
We can rearrange the formula to solve for the potential difference (VB - VA): VB - VA = WAB / q0. Substituting the given values, we have [tex](VB - VA) = (-5.60 * 10^-^9 J) / (+4.69 * 10^-^1^1 C)[/tex].
Now, since both surfaces are equipotential, the potentials at surfaces A and B are the same. Therefore, VB - VA = 0, and we can equate it to the value obtained above. Solving for rB, we get:
[tex](0) = (-5.60 * 10^-^9 J) / (+4.69 * 10^-^1^1 C)\\0 = -119.2 C[/tex]
Thus, the radius of the second equipotential surface, rB, is 0 meters.
Learn more about potential difference here:
https://brainly.com/question/30893775
#SPJ11
What maximum current is delivered by an AC source with AVmax = 46.0 V and f = 100.0 Hz when connected across a 3.70-4F capacitor? mA
The maximum current delivered by an AC source with a peak voltage of 46.0 V and a frequency of 100.0 Hz, when connected across a 3.70-4F capacitor, can be calculated. The maximum current is found to be approximately 12.43 mA.
The relationship between the current (I), voltage (V), and capacitance (C) in an AC circuit is given by the formula I = CVω, where ω is the angular frequency. The angular frequency (ω) can be calculated using the formula ω = 2πf, where f is the frequency.
Given that the peak voltage (Vmax) is 46.0 V and the frequency (f) is 100.0 Hz, we can calculate the angular frequency (ω = 2πf) and then substitute the values into the formula I = CVω to find the maximum current (I).
To incorporate the capacitance (C), we need to convert it to Farads. The given capacitance of 3.70-4F can be written as 3.70 × 10^(-4) F.
Substituting the values into the formula I = CVω, we can calculate the maximum current.
After performing the calculations, the maximum current delivered by the AC source across the 3.70-4F capacitor is found to be approximately 12.43 mA.
Learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ11
A small diamond of mass 16.6 g drops from a swimmer's earring and falls through the water, reaching a terminal velocity of 2.2 m/s. (a) Assuming the frictional force on the diamond obeys f= -bv, what is b (in kg/s)? (Round your answer to at least four decimal places.) 0.081 X kg/s (b) How far (in m) does the diamond fall before it reaches 90 percent of its terminal speed?
(a)The diamond's terminal velocity is 2.2 m/s, and its mass is 16.6 g. The frictional constant (b) is 0.081 kg/s, and (b) the distance it falls before reaching 90 percent of its terminal speed is 0.201 meters.
For part a: For finding the value of b, the formula used for the frictional force on the diamond, which is given as
f = -bv
where f is the frictional force and v is the velocity. Given that diamond reaches a terminal velocity of 2.2 m/s, substitute this value into the formula:
-bv = 2.2.
Since the mass of the diamond is given as 16.6 g, convert it to kilograms by dividing by 1000: 16.6 g = 0.0166 kg.
Now calculate for b:
-b * 2.2 = 0.0166.
Dividing both sides by -2.2,
b ≈ 0.00754545 kg/s
which is rounded to at least four decimal places is approximately 0.081 kg/s.
For part (b), calculate the distance the diamond falls before reaching 90 percent of its terminal speed. When an object reaches 90 percent of its terminal speed, it means that its velocity is 0.9 times the terminal velocity. Therefore, calculate this velocity by multiplying the terminal velocity by:
0.9: 0.9 * 2.2 m/s = 1.98 m/s.
Next, use the kinematic equation for a uniformly accelerated motion to find the distance travelled by the diamond. The equation is given as:
[tex]d = (v^2 - u^2) / (2a)[/tex]
where d is the distance, v is the final velocity, u is the initial velocity, and a is the acceleration. Since the diamond is falling freely, the initial velocity is 0, and the acceleration is equal to the gravitational acceleration, approximately [tex]9.8 m/s^2[/tex].
Plugging in the values,
[tex]d = (1.98^2 - 0) / (2 * 9.8) = 0.201 m[/tex].
Therefore, the diamond falls a distance of 0.201 meters before reaching 90 percent of its terminal speed.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
For the charges shown below, in the center of the square (at point p ) find the net electric field
I can help with your second question. The spring constant, k, can be derived from the data provided about the spring and the projectile motion of the ball.
To find the spring constant, we can use the conservation of energy principle. Initially, all the energy is stored in the spring as potential energy, and when the spring is released, this potential energy is converted into the kinetic energy of the ball. We can use the equation 0.5*k*x^2 = 0.5*m*v^2, where x is the compression of the spring, m is the mass of the ball, and v is the initial speed of the ball.
Since we don't have the initial speed of the ball, we can derive it from the given data using the principles of projectile motion. The horizontal speed of the ball, v, can be found using the equation v = d/t, where d is the horizontal distance the ball travels and t is the time it takes to hit the ground. The time t can be found using the equation h = 0.5*g*t^2, where h is the vertical distance to the ground and g is the acceleration due to gravity. After finding v, we can substitute it into our energy equation to find the spring constant, k.
Learn more about energy conservation here:
https://brainly.com/question/13949051
#SPJ11
A bar is free to fall while completing the circuit. The resistor has resistance 38.8 Ω. The rod has a length of 1.42 m. The magnetic field is out of the page a magnitude of 0.10 T. The bar is falling with a speed of 95.77 m/s, and the speed is now constant because the force of gravity and the electromotive force are balanced. What is the mass of the bar?
From the equation of motion, the gravitational force acting on the bar is equal to its mass times the acceleration due to gravity.So, the mass of the bar is given as:m = F/g= 0.4038 N/9.81 m/s²= 0.0411 kgHence, the mass of the bar is 0.0411 kg.
A bar of mass m is free to fall while completing the circuit. The resistor has resistance 38.8 Ω. The rod has a length of 1.42 m. The magnetic field is out of the page at a magnitude of 0.10 T. The bar is falling with a speed of 95.77 m/s, and the speed is now constant because the force of gravity and the electromotive force are balanced.In order to determine the mass of the bar,
we need to make use of the following expression:emf = Blvwhere,emf = Electromotive forceB = Magnetic fieldl = Length of the conductorv = Velocity of the conductorNow, the electromotive force induced is given as:emf = Blv= 0.10 T × 1.42 m × 95.77 m/s= 1.365 VThe voltage drop across the resistor is equal to the electromotive force, therefore,
the current through the circuit is given by:V = IR38.8 Ω = I × 1.365 VI = 28.32 AThe force acting on the conductor is given by:F = BIl= 0.10 T × 1.42 m × 28.32 A= 0.4038 N
From the equation of motion, the gravitational force acting on the bar is equal to its mass times the acceleration due to gravity.So, the mass of the bar is given as:m = F/g= 0.4038 N/9.81 m/s²= 0.0411 kgHence, the mass of the bar is 0.0411 kg.
to know more about gravitational
https://brainly.com/question/23586829
#SPJ11
In a scanning electron microscope, if we accelerate an electron through an electric potential of 20 kV, what is the electron's kinetic energy? (1 eV-1.6x10J, me = 9.11 x 10kg) (b) What is the velocity of the electron after the acceleration? Do we need to consider its relativistic effect? Briefly justify your answer and support your justification with a calculation. (c) What is the de Broglie wavelength of the electron with the velocity as in (b) (i) = 6,63 % 10*) (d) For an electron as described in (a), what is the minimum possible uncertainty in its position 08) The ontzation ency of the droom is 13.6 V. Ir the new meth hop & 7 00 8 9 O
The electron's kinetic energy is -32 x 10^(-16) J.he de Broglie wavelength of the electron is approximately 1.23 x 10^(-11) m.
(a) To find the electron's kinetic energy, we can use the formula:
Kinetic energy (K.E.) = qV
Where:
q is the charge of the electron
V is the electric potential
Given:
Charge of the electron (q) = -1.6 x 10^(-19) C
Electric potential (V) = 20 kV = 20 x 10^3 V
Substituting the values into the formula:
K.E. = (-1.6 x 10^(-19) C) * (20 x 10^3 V)
K.E. = -32 x 10^(-16) J
Therefore, the electron's kinetic energy is -32 x 10^(-16) J.
(b) To determine the velocity of the electron after acceleration, we can use the formula for kinetic energy:
K.E. = (1/2)mv^2
Where:
m is the mass of the electron
v is the velocity of the electron
Given:
Mass of the electron (m) = 9.11 x 10^(-31) kg
Kinetic energy (K.E.) = -32 x 10^(-16) J
Rearranging the formula:
v^2 = (2K.E.) / m
v = √[(2K.E.) / m]
Substituting the values:
v = √[(2 * (-32 x 10^(-16) J)) / (9.11 x 10^(-31) kg)]
v ≈ 5.92 x 10^7 m/s
To determine if we need to consider the relativistic effect, we can compare the calculated velocity to the speed of light. The speed of light (c) is approximately 3 x 10^8 m/s. Since the velocity of the electron (5.92 x 10^7 m/s) is significantly smaller than the speed of light, we can neglect the relativistic effects for this calculation.
(c) The de Broglie wavelength of the electron can be calculated using the equation:
λ = h / p
Where:
λ is the de Broglie wavelength
h is the Planck's constant (6.63 x 10^(-34) J·s)
p is the momentum
The momentum can be calculated using:
p = mv
Given:
Mass of the electron (m) = 9.11 x 10^(-31) kg
Velocity of the electron (v) = 5.92 x 10^7 m/s
Substituting the values:
p = (9.11 x 10^(-31) kg) * (5.92 x 10^7 m/s)
p ≈ 5.39 x 10^(-23) kg·m/s
Now, substituting the calculated momentum into the de Broglie wavelength equation:
λ = (6.63 x 10^(-34) J·s) / (5.39 x 10^(-23) kg·m/s)
λ ≈ 1.23 x 10^(-11) m
Therefore, the de Broglie wavelength of the electron is approximately 1.23 x 10^(-11) m.
(d) The minimum possible uncertainty in the position of the electron can be determined using the Heisenberg uncertainty principle:
Δx * Δp ≥ h/2
Where:
Δx is the uncertainty in position
Δp is the uncertainty in momentum
h is the Planck's constant (6.63 x 10^(-34) J·s)
Since the electron is accelerated and has a known velocity, its momentum is well
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
A resistor has the following colored stripes: red, red, black, gold. Its resistance is equal to:
a. 220 Ω b. 0.220 Ω c. 2220 Ω d. 22 Ω
A resistor has the following colored stripes: red, red, black, gold. Its resistance is equal to 22 , option d.
A resistor is a circuit element that restricts current flow. Resistance is the resistance of a substance to the flow of electricity. The resistance of a circuit is determined by resistors.
In electrical circuits, resistor color coding is commonly utilized to recognize the resistance of a resistor. A series of colored stripes are used to indicate the resistance of a resistor. A digit or number corresponds to each colored stripe. Here is the code for the colors of the stripes:
Color 1 = digit 1
Color 2 = digit 2
Color 3 = multiplier
Color 4 = tolerance
Gold is the tolerance level.
To decode the colors on the resistor, we use this formula:
Resistance = (Digit 1 * 10 + Digit 2) * Multiplier
Digit 1 = Red
Digit 2 = Red
Multiplier = Black
Tolerance = Gold
Resistance = (2 * 10 + 2) * 1
Resistance = 22 Ω
Therefore, a resistor has the following colored stripes: red, red, black, gold. Its resistance is equal to 22 Ω.
Learn more about resistor: https://brainly.com/question/30140807
#SPJ11
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters. What is the initial energy of the car? _______ J
What is the final energy of the car? ________J How much work was done by the brakes to stop the car? ________J (make sure you include the correct sign) Determine the magnitude (enter your answer as a positive answer) of the braking force acting upon the car. _________ N
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters.
Velocity of car, v = 22.9 m/s Mass of car, m = 1260 kg Braking distance, s = 126 m
The initial energy of the car can be calculated as:
Initial Kinetic Energy of the car = 1/2 mv²
Here, m = 1260 kg, v = 22.9 m/s
Putting these values in the above formula: Initial Kinetic Energy = 1/2 × 1260 kg × (22.9 m/s)²= 1/2 × 1260 kg × 524.41 m²/s²= 165748.1 J
The final energy of the car is zero as the car is at rest now. Work done by the brakes to stop the car can be calculated as follows:
Work Done = Change in Kinetic Energy= Final Kinetic Energy - Initial Kinetic Energy
The final kinetic energy of the car is zero. Therefore, Work Done = 0 - 165748.1 J= -165748.1 J (Negative sign indicates the energy is lost by the car during the application of brakes)
The magnitude of the braking force acting upon the car can be calculated using the work-energy principle. The work done by the brakes is equal to the net work done by the forces acting on the car. Therefore,
Work Done by Brakes = Force x Distance
The frictional force acting on the car is equal to the force applied by the brakes. Hence,
Force = Frictional force acting on the car. The work done by the frictional force can be calculated as follows:
Work Done = Frictional force x Distance
Therefore, Frictional force acting on the car = Work Done / Distance= -165748.1 J / 126 m= -1314.6 N (The negative sign indicates that the force acts opposite to the direction of motion of the car. The magnitude of the force is 1314.6 N.)
Therefore, Initial Energy of the car = 165748.1 J
Final Energy of the car = 0 J
Work done by the brakes to stop the car = -165748.1 J
Magnitude of the braking force acting upon the car = 1314.6 N
Learn more about Kinetic energy: https://brainly.com/question/8101588
#SPJ11
The capacitor from the previous problem is carefully removed from the circuit after t=1.5 s in such a way that the charge on each plate is not removed. It's placed in another circuit where it is in series with a 150Ω resistor. (a) What is the current in the circuit the instant it's connected? (b) What is the voltage across the capacitor after .25s? (c) What is the charge on each plate of the capacitor at this time?
After carefully removing the capacitor from its initial circuit and placing it in a new circuit with a 150Ω resistor in series, calculations are needed to determine the current in the circuit at the moment of connection, the voltage across the capacitor after 0.25s
When the capacitor is connected to the new circuit, an instantaneous current will flow. To calculate this current, we can use the formula I = V/R, where V is the initial voltage across the capacitor and R is the resistance in the circuit.
After 0.25s, the voltage across the capacitor can be determined using the formula V = V₀ * exp(-t/RC), where V₀ is the initial voltage across the capacitor, t is the time, R is the resistance, and C is the capacitance.
The charge on each plate of the capacitor can be calculated using the formula Q = CV, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor.
By substituting the given values into the respective formulas, we can determine the current in the circuit at the moment of connection, the voltage across the capacitor after 0.25s, and the charge on each plate of the capacitor at that time.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
Your car's 32.0 W headlight and 2.60 kW starter are ordinarily connected in parallel in a 12.0 V system. What power (in W) would one headlight and the starter consume if connected in series to a 12.0 V battery? (Neglect any other resistance in the circuit and any change in resistance in the two devices. Answer to the nearest 0.1 W.)
The given value of the power of a car's 32.0 W headlight and 2.60 kW starter connected in parallel in a 12.0 V system is to be used to find the power consumed by one headlight and the starter when connected in series to a 12.0 V battery. This is to be calculated without taking any other resistance into account and any change in resistance in the two devices.The power of the car's headlight and starter when connected in parallel is to be found initially.
Since the power of the headlight is given in watts and that of the starter in kilowatts, the latter is to be converted into watts before summing up with the former.
∴ power when connected in parallel = 32.0 W + 2.60 kW × 1000 W/kW = 32.0 W + 2600 W = 2632 W.
When the two devices are connected in series, the total voltage across the two devices = 12 V + 12 V = 24 V.
Let R be the resistance of one headlight. Since the resistance is the same for both devices in the parallel connection, the combined resistance of the two devices = R/2. Let I be the current through each device when connected in series, then
I = 24 V/R.
By the law of conservation of energy, the power of each device when connected in series = 12 V × I. Therefore, the power consumed by one headlight and the starter when connected in series to a 12.0 V battery is given by:
P = 12 V × I = 12 V × 24 V/R = 288 V²/R watts
Hence, the power consumed by one headlight and the starter when connected in series to a 12.0 V battery is 288 V²/R, where R is the resistance of one headlight.
Answer: 691.2 W.
Learn about power here: https://brainly.com/question/11569624
#SPJ11
A particle with a charge of +3e enters a mass spectrometer with a velocity of 7 x 106 m/s on the horizontal plane. The magnetic field inside the spectrometer has a magnitude of 0.2 Tesla pointed vertically upwards. Inside the magnetic field, the particle travels in a circular path of radius 30 cm. (e = 1.6 × 10-¹⁹ C) (3) a) Calculate the magnitude and direction of the magnetic force on the particle. b) Therefore, calculate the mass of the particle.
(a)The magnitude of the magnetic force is [tex]4.2e^-^1^3[/tex] Newtons, and the direction is inward towards the centre of the circular path. (b)The mass of the particle is approximately [tex]1.53 * 10^-^2^2[/tex] kg
(a)To calculate the magnitude of the magnetic force on the particle, we can use the formula for the magnetic force on a charged particle moving in a magnetic field:
F = qvB
where F is the force, q is the charge, v is the velocity, and B is the magnetic field.
Plugging in the values
F = (3e)(7 x 106 m/s)(0.2 Tesla).
Simplifying the expression
F = [tex]4.2e^-^1^3[/tex] Newtons.
The direction of the force can be determined using the right-hand rule, which states that if pointing the thumb in the direction of the velocity (horizontal plane) and curling the fingers in the direction of the magnetic field (vertically upwards), the palm indicates the direction of the force, which is inward towards the centre of the circular path.
(b)To calculate the mass of the particle, the centripetal force formula is used:
[tex]F = (mv^2)/r[/tex]
where F is the force, m is the mass, v is the velocity, and r is the radius of the circular path.
Since the magnetic force and centripetal force are the same in this case, equate them:
[tex]qvB = (mv^2)/r[/tex]
Solving for mass,
[tex]m = (qvBr)/v^2 (3e)(0.2 Tesla)(0.3 m) / (7 * 106 m/s)^2[/tex]
Substituting the values, the mass of the particle is approximately [tex]1.53 * 10^-^2^2[/tex] kg.
Learn more about magnetic force here:
https://brainly.com/question/30532541
#SPJ11
A ring of current with radius 5 lies in the xy plane with center at the origin and carries a current of 10 A in the positive direction. A charge equal to 1 C is travelling from the origin at a velocity equal to u=202. what is direction of the force acting on the charge? 0-2 None of the given answers because the force is zero 3 -p O 16
The force acting on the charge will be directed in a direction perpendicular to the xy-plane (out of the plane or in the z-direction), and this corresponds to answer choice 3: -p.
To determine the direction of the force acting on the charge moving through the magnetic field created by the current-carrying ring, we can use the right-hand rule.
The right-hand rule for the force on a moving charge states that if you point your thumb in the direction of the charge's velocity (u), and your fingers in the direction of the magnetic field (due to the current in the ring), then the force will be perpendicular to both the velocity and magnetic field, and will point in the direction your palm faces.
In this case, since the charge is moving from the origin with a velocity u=202, and the current in the ring creates a magnetic field around it, the force acting on the charge will be perpendicular to both the velocity and the magnetic field.
Therefore, the force acting on the charge will be directed in a direction perpendicular to the xy-plane (out of the plane or in the z-direction), and this corresponds to answer choice 3: -p.
To know more about current here
https://brainly.com/question/1100341
#SPJ4