A person sitting in an artificial satellite of the earth feels weightlessness, but a person standing on moon has weight through the moon is a satellite of the earth. Why?​

Answers

Answer 1
Because Mass of moon is considerable

Related Questions

a coil with area 2.0 m2 rotates in a 0.010 t magnetic field at a frequency of 60 hz. how many turns are needed to generate a peak voltage of 160 v?

Answers

21 turns are required to generate a peak voltage of 160 V for a  coil with an area of 2.0 m² that rotates in a 0.010T magnetic field at a frequency of 60 Hz.

In order to determine the number of turns needed to generate a peak voltage of 160 V, we need to use the formula for the peak voltage of an alternating current (AC) generator. The formula is given as follows:

Vp = 2 * π * f * N * A * B

Where: Vp is the peak voltage, f is the frequency of rotation, N is the number of turns, A is the area of the coil, and B is the magnetic field strength.

The area of the coil is 2.0 m², the magnetic field strength is 0.010 T, the frequency of rotation is 60 Hz, and the peak voltage is 160 V.

We can substitute these values into the above formula to find the number of turns:

160 = 2 * π * 60 * N * 2.0 * 0.010

Simplifying:

160 = 7.54 N

Therefore:

N = 160 / 7.54

N ≈ 21.22

Thus, approximately 21 turns are needed to generate a peak voltage of 160 V.

To know more about peak voltage, refer here:

https://brainly.com/question/11629192#

#SPJ11

most planets in our solar system rotate in a counter-clockwise direction when viewed from above the north pole of the sun. what is unusual about the rotation of venus?

Answers

Venus rotates in a clockwise direction when viewed from above the north pole of the sun, which is unusual compared to most planets in our solar system.

Venus is unique among the planets in our solar system in that it rotates in the opposite direction of most planets. While most planets, including Earth, rotate counterclockwise when viewed from above the north pole of the sun, Venus rotates clockwise. In addition, Venus rotates very slowly, taking about 243 Earth days to complete one rotation.

This slow, retrograde rotation is thought to be the result of a collision with a massive object in the past, which caused the planet to flip over and start rotating in the opposite direction. Venus's unusual rotation is one of the many factors that make it a fascinating subject for scientific study.

To know more about Venus, here

brainly.com/question/18452664

#SPJ4

The mass of an empty density bottle is 20 grams. Its mass when filled with water is 40.0 grams and 50.0 grams when filled with liquid X. Given that the density of water is 1000 kg/m^3? calculate:
a) The volume of the bottle
b) The density of liquid X

Answers

The difference between the bottle's empty and full masses after being filled with water. Hence, the bottle's volume is [tex]20.0 cm^3.[/tex]

How can you figure out a density bottle's capacity?

Any bottle with a defined volume that can be weighed both empty and full of the liquid whose density you want to find out is referred to as a density bottle. Thus, you can calculate density using the formula density = mass/volume. Q.

Mass of water = 40.0 g - 20 g

= 20.0 g

The density of water is

[tex]1000 kg/m^3 = 1 g/cm^3[/tex]

Volume of water = Mass of water / Density of water = [tex]20.0 g / 1 g/cm^3 = 20.0 cm^3[/tex]

To know more about masses visit:-

https://brainly.com/question/30337818

#SPJ1

identical twins anna and hannah visit you at the optical clinic. anna, whose eyes can easily focus on distant objects (her far point), is also able to focus on objects within 20 cm of her eyes (her near point). assuming the diameter and, hence, the distance between the cornea and retina, of anna's eye is 20 mm, what is the range (in diopters) of anna's vision? the limits of this range correspond to the total refractive power of her eyes at their far point and and the refractive power at their near point. group of answer choices

Answers

.How far objects are clearly visible by the eyes is known as the far point. The point where objects appear clearly without strain is known as the near point. In the question, the near point is 20 cm from the eye and the far point is at infinity, which means it can see up to infinity distance. Hence, the range of Anna's vision is 1.

To calculate the power of the eye lens, we use the following formula:

The refractive power of the eye = 1/f

where f is the focal length of the eye lens.2. Far point of the eye, the image is formed at the retina, therefore,

f = 20 mm = 0.02 m  = 1/f = 1/0.02 m = 50 D3.

Near the point, the image is formed at a distance of 20 cm from the eye lens.

To calculate the focal length:

f = 20 cm = 0.2 mf = 1/f = 1/0.2 m = 5 D4.

Range of Anna's vision = Refractive power of eye at the near point - Refractive power of eye at the far point

= 5 D - 50 D= -45

Thus, the range of Anna's vision is -45 D.

#SPJ11

to learn more about refractive power : https://brainly.com/question/25164545

a professor drives off with his car (mass 850 kg), but forgot to take his coffee mug (mass 0.3 kg) off the roof. the coefficient of static friction between the mug and the roof is 0.7, and the coefficient of kinetic friction is 0.5. what is the maximum acceleration of the car, so the mug does not slide off?]

Answers

The maximum acceleration of the car so the mug does not slide off is 6.861 m/s².

To find the maximum acceleration of the car so the mug does not slide off, follow these steps:

1. Determine the maximum static friction force between the mug and the roof using the formula:

static friction force = coefficient of static friction * normal force.

In this case, the normal force is equal to the weight of the mug (mass * gravity), so the formula becomes:

static friction force = 0.7 * (0.3 kg * 9.81 m/s²).

2. Calculate the static friction force: 0.7 * (0.3 kg * 9.81 m/s²) = 2.0583 N.

3. Determine the maximum acceleration by dividing the static friction force by the mass of the mug: maximum acceleration = static friction force / mass of the mug = 2.0583 N / 0.3 kg.

4. Calculate the maximum acceleration: 2.0583 N / 0.3 kg = 6.861 m/s².

For more details about acceleration click here:

https://brainly.com/question/12550364#

#SPJ11

a swimming pool is 20 ft wide and 40 ft long and its bot- tom is an inclined plane, the shallow end having a depth of 3 ft and the deep end, 9 ft. if the pool is full of water, find the hydrostatic force on (a) each of the four sides and (b) the bot- tom of the pool.

Answers

Hydrostatic force on each of the two longer sides: 4,242,774 N, Hydrostatic force on the shallow end of the pool: 3,378,717 N,            Hydrostatic force on the bottom of the pool: 43,520,265 N

The hydrostatic force on each of the four sides and the bottom of the pool can be calculated using the principles of fluid mechanics. The hydrostatic force is the force exerted by the fluid (water) on the surface of the object (the pool).

(a)  Hydrostatic force on each of the two longer sides:

[tex]F = pghA = 1000 kg/mx^{3} * 9.81 m/s^{2} * 1.83 m * 22.3 m^{2} = 4,242,774 N[/tex]

Hydrostatic force on the shallow end of the pool:

[tex]F = p ghA = 1000 kg/m^{3} * 9.81 m/s^{2} * 3 m * 11.15 m^{2} = 3,378,717 N[/tex]

(b) Hydrostatic force on the bottom of the pool:

F = ρghA = [tex]1000 kg/m^{3} * 9.81 m/s^{2} * 6 m * 74.32 m^{2} = 43,520,265 N[/tex]

To know more about Hydrostatic force, here

brainly.com/question/29856083

#SPJ4

If the mass of bob of a pendulum is increased by a factor of '2' then the period of pendulum motion will?

Answers

If the mass of the bob of a pendulum is increased by a factor of 2, then the period of pendulum motion will increase.

This can be explained by the formula for the period of a simple pendulum, which is T=2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. We can see that the mass of the bob does not appear in this formula.

However, when we increase the mass of the bob, the pendulum will have a greater inertia, which means that it will require more time to swing back and forth between its two extreme positions. Therefore, the period of the pendulum will increase when the mass of the bob is increased by a factor of 2.

To know more about pendulum, here

brainly.com/question/30491687

#SPJ4

What capacitance do you need to produce a resonant frequency of 1.00 GHz, when using an 8.00 nH inductor? b). What inductance do you need to produce a resonant frequency of 60.0 Hz, when using a 2.00 uF capacitor

Answers

a) To find the capacitance needed to produce a resonant frequency of 1.00 GHz when using an 8.00 n-H inductor, you can use the formula for the resonant frequency:

f = 1 / (2 * pi * sqrt(L * C))

Where f is the resonant frequency, L is the inductance, and C is the capacitance. Rearranging the formula to find C:

C = 1 / (4 * pi^2 * f^2 * L)

Plugging in the values:

C = 1 / (4 * pi^2 * (1.00 * 10^9)^2 * (8.00 * 10^-9))
C ≈ 3.18 * 10^-15 F

So, you need a capacitance of approximately 3.18 pF to produce a resonant frequency of 1.00 GHz when using an 8.00 nH inductor.

b) To find the inductance needed to produce a resonant frequency of 60.0 Hz when using a 2.00 µF capacitor, you can use the same formula for the resonant frequency and rearrange it to find L:
L = 1 / (4 * pi^2 * f^2 * C)

Plugging in the values:
L = 1 / (4 * pi^2 * (60.0)^2 * (2.00 * 10^-6))
L ≈ 1.77 * 10^-3 H

So, you need an inductance of approximately 1.77 m-H to produce a resonant frequency of 60.0 Hz when using a 2.00 µF capacitor.

To know more about resonant frequency here :

https://brainly.com/question/13040523

#SPJ11

the speed of light is . how long does it take light to travel ? set the math up. but don't do any of it. just leave your answer as a math expression.

Answers

The mathematical expression for calculating the time taken by light to travel a distance is

`time = distance / 299,792,458`.

As a question-answering bot, I understand the prompt, "The speed of light is __.

How long does it take light to travel : Set the math up.

But don't do any of it.

Just leave your answer as a math expression.

The prompt is asking to set up the mathematical expression for calculating the time taken by light to travel a particular distance.

The speed of light is 299,792,458 meters per second (m/s).

The time taken by light to travel a distance is calculated by the formula `time = distance / speed of light`.

Therefore, the mathematical expression for calculating the time taken by light to travel a distance can be set up as `time = distance / 299,792,458`.

Here, the unit of distance is meters and the unit of speed of light is meters per second.

The unit of time is seconds.

Therefore, the unit of the expression `time = distance / 299,792,458` is seconds.

This mathematical expression can be used to calculate the time taken by light to travel a particular distance.

For example, if the distance is 10 meters, then the time taken by light to travel the distance can be calculated as

`time = 10 / 299,792,458 seconds`.

This simplifies to `time = 3.3356409519815205 × [tex]10^-8[/tex] seconds`.

For similar question on expression.

https://brainly.com/question/25968875

#SPJ11

This type of soil occur in temperate climates where rainfall is moderate to high.pedocallateritepedalferhumus

Answers

This type of soil occur in temperate climates where rainfall is moderate to high (c)  pedalfer soil is correct option.

A temperate climate is one that is moderate and is distinguished by pronounced seasonal fluctuations and generally mild temperatures.Here, Pedalfer soils, often referred to as "brown earth," are distinguished by having a lot of iron and aluminium oxides in them. They develop in humid climates where rainfall strips the topsoil of its minerals and nutrients and causes the subsoil to become enriched with iron and aluminium oxides. Because they can support plant growth, pedalfer soils are often productive and frequently employed for agricultural purposes.Contrarily, laterite soils are found in tropical areas with high rainfall, pedicel soils are found in dry or semi-arid environments, and humus is an organic material that can be found in diverse type of soil.

Thus (c ) is correct answer.

To know more about soil

https://brainly.com/question/12936553

#SPJ4

to make real ice cream, how much milk fat must the ice cream contain?

Answers

To make real ice cream, the ice cream must contain a minimum of 10% milk fat.

Ice cream is a delicious and popular dessert enjoyed by people all over the world. It is made by mixing cream, sugar, and other ingredients and then freezing the mixture until it becomes thick and creamy. Ice cream is defined as a frozen food product that is made from a mixture of milk, cream, sugar, and flavorings.

It must contain at least 10% milk fat to be considered real ice cream. The milk fat is what gives ice cream its creamy texture and rich flavor. Milk fat is an essential ingredient in ice cream because it gives it the smooth, creamy texture that people love. Without enough milk fat, the ice cream will be thin, icy, and not as flavorful.

Milk fat is a key ingredient in ice cream and is what gives it its signature taste and texture. Most ice cream makers use a combination of milk and cream to achieve the desired milk fat content. Some ice cream makers also add other ingredients like eggs or stabilizers to help improve the texture and consistency of the ice cream.

Ice cream is a popular dessert that has been enjoyed for centuries. By following the proper recipe and using high-quality ingredients like milk fat, you can make delicious and creamy ice cream at home.

To know more about milk fat refer here:

https://brainly.com/question/19589850#

#SPJ11

Which processes involve the transfer of a large amount of thermal energy?

Answers

Thermal energy transfers occur in three ways: through conduction, convection, and radiation. When thermal energy is transferred between neighboring molecules that are in contact with one another, this is called conduction.Thermal energy transfers occur in three ways: through conduction, convection, and radiation. When thermal energy is transferred between neighboring molecules that are in contact with one another, this is called conduction.

Explanation:

A group of students must study the oscillatory motion of a pendulum. One end of a light string is attached to the ceiling, and the other end of the string is attached to a mass hanger so that small disks of various masses may be stacked on the hanger, as shown in the figure.
Students are provided with data in which an experiment was conducted to determine the relationship between the length of the pendulum and the period of oscillation. The data include a pendulum of length 0.5m, for which it took 81 s for the pendulum bob to oscillate 10 times. However, the experiment was conducted at a location that is not near Earth’s surface. The gravitational field strength where the experiment was conducted is most nearly...?
0.003N/kg
0.024N/kg
0.30N/kg
2.40N/kg

Answers

The gravitational field strength where the experiment was conducted is most nearly  0.30 N/kg.The coorect option is (c).To determine the gravitational field strength where the experiment was conducted, we can use the formula for the period of a pendulum:



T = 2π√(L/g),where T is the period of oscillation, L is the length of the pendulum, and g is the gravitational field strength. In this case, we are given the information that it took 81 seconds for the pendulum to oscillate 10 times, so the period T is 81/10 = 8.1 seconds. The length L of the pendulum is given as 0.5 meters.



We can rearrange the formula to solve for g:
g = L/(T^2/(4π^2))
Now, we can plug in the given values for T and L:
g = 0.5/(8.1^2/(4π^2))
g ≈ 0.5/(65.61/(4π^2))
g ≈ 0.5/(65.61/39.4784)
g ≈ 0.5/1.6611
g ≈ 0.3009 N/kg, Therefore, the gravitational field strength is most nearly 0.30 N/kg.

To know more about gravitational field click here

brainly.com/question/14906359

#SPJ11

What variable affects the natural frequency of an organ pipe?A) Pipe WidthB) Pipe lengthC) Pipe areaD) Pipe use

Answers

The resonance frequency relies simply on the length of both the organ pipe. The right answer is (c), which states that the frequency of the open organ pipe is 300 Hz.

Why does natural frequency change?

The object's content, size, construction, weight, and form all affect the natural frequency measurement. If we exert a vibrating force on the item that possesses a frequency equal to the inherent frequency of the material, it is a resonance situation.

What impact does a pipe's length have on frequency?

The diameter of the tube should not matter because lengthening the tube reduces frequency. According to a more detailed prediction, the diameter does have a minor effect by mildly raising the actual length of the conduit as the diameter expands.

To know more about force click here

brainly.com/question/30563158

#SPJ4

a screw has a head diameter of 0.812 cm and a thread width of 0.318 cm. what is the ideal mechanical advantage?

Answers

The ideal mechanical advantage of the screw is 8.08.

The ideal mechanical advantage of a screw is determined by dividing the circumference of the screw by the thread width.

Circumference of screw = π × diameter of head = π × 0.812 cm

Thread width = 0.318 cm

Ideal mechanical advantage = Circumference of screw / Thread width

Ideal mechanical advantage = (π × 0.812 cm) / 0.318 cm

Ideal mechanical advantage = 8.08

Thus, the screw's ideal mechanical advantage is 8.08.

This means that for every rotation of the screw, it will move a distance of 8.08 times the thread width, making it easier to lift or move a heavy load. Ideal mechanical advantage is a theoretical concept, and the actual mechanical advantage may differ from it due to various factors such as friction and wear and tear of the screw.

To know more about mechanical advantage, refer here:

https://brainly.com/question/16617083#

#SPJ11

a rigid tank of volume 2 m3 initially contains air at 0.21 bar, 290 k. a leak develops and air flows in slowly from the surroundings which are at 1.1 bar, 312 k. after a while, the tank and its surroundings come to equilibrium. what is the final temperature in the tank, in oc, and how much mass has entered the tank, in kg? neglect kinetic and potential energy effects, and assume the air is an ideal gas with constant specific heats evaluated at 300 k.

Answers

The final temperature in the tank is 33.85°C. The amount of mass entered the tank is 0.0108 kg/s.

The mass flow rate can be calculated using the mass balance equation for a steady-state control volume. Since the tank is rigid, its volume is constant, and the mass balance equation simplifies to:

m = p₂V/(RT₂) - p₁V/(RT₁)

where V is the volume of the tank, R is the universal gas constant, and m is the mass flow rate.

Substituting the given values:

p₁ = 0.21 bar

p₂ = 1.1 bar

T₁ = 290 K

T₂ = 312 K

V = 2 m³

R = 8.314 J/mol·K

we get:

m = (1.1)(2)/(8.314)(312) - (0.21)(2)/(8.314)(290) = 0.0108 kg/s

The final temperature in the tank can be calculated using the energy balance equation for a steady-state control volume. Since the tank is rigid, its volume is constant, and the energy balance equation simplifies to:

T = T₁ + (m)(R)(T₂ - T₁))/(m)(Cv)

where T is the final temperature of the air in the tank, Cv is the constant-volume specific heat of the air, and all other symbols have their usual meanings.

Substituting the given values:

Cv = Cp - R = 1.005 - 0.287 = 0.718 kJ/kg·K

(since the air is assumed to be an ideal gas with constant specific heats evaluated at 300 K)

T₁ = 290 K

T₂ = 312 K

m = 0.0108 kg/s

R = 8.314 J/mol·K

we get:

T = 290 + (0.0108)(8.314)(312 - 290)/(0.0108)(0.718) = 307 K

The final temperature in the tank is 307 K, which is equivalent to 33.85°C. The mass that has entered the tank is 0.0108 kg/s.

Learn more about mass flow rate here: https://brainly.com/question/30618961

#SPJ11

A 78.30 kg child is riding a 5.1 kg bike with a velocity of 3.39 m/s to the northwest.



What is the total momentum of the child and the bike together?

Answers

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

The momentum of the child can be calculated as:

p_child = m_child * v_child

where m_child = 78.30 kg is the mass of the child, and v_child = 3.39 m/s is the velocity of the child.

p_child = 78.30 kg * 3.39 m/s = 265.35 kg m/s to the northwest

The momentum of the bike can be calculated as:

p_bike = m_bike * v_bike

where m_bike = 5.1 kg is the mass of the bike, and v_bike = 3.39 m/s is the velocity of the bike.

p_bike = 5.1 kg * 3.39 m/s = 17.31 kg m/s to the northwest

To find the total momentum of the child and the bike together, we simply add the individual momenta together:

p_total = p_child + p_bike

p_total = 265.35 kg m/s + 17.31 kg m/s

p_total = 282.66 kg m/s to the northwest

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

learn more about momentum here

https://brainly.com/question/7538238

#SPJ1

What is the velocity of propagation for disturbances on the transmission line? (Use c = 1 ft/ns as the speed of light in a vacuum.)
vp = 0.5 ft/ns
vp = 1 ft/ns
vp = 0.25 ft/ns
vp = 2 ft/ns
QUESTION 8
How long does it take for a disturbance to traverse the entire length of the transmission line? Type your answer in nanoseconds to one place after the decimal.
QUESTION 9
What is the value of the generator reflection coefficient? Type your answer to three places after the decimal.
QUESTION 10
What is the value of the load reflection coefficient? Type your answer to three places after the decimal.

Answers

Question 8:How long does it take for a disturbance to traverse the entire length of the transmission line :

To find how long it takes for a disturbance to traverse the entire length of the transmission line, we can use the formula:
time = distance/velocity
The distance is given as 250 ft, and the velocity of propagation for disturbances on the transmission line is given as 0.5 ft/ns. Thus, we have:

time = 250/0.5 = 500 ns

Therefore, it takes 500 nanoseconds for a disturbance to traverse the entire length of the transmission line.
Answer: 500 ns

Question 9: What is the value of the generator reflection coefficient?

To find the generator reflection coefficient, we can use the formula:
Γg = (Z g - Z0)/(Z g + Z0)
where Z g is the load impedance, and Z0 is the characteristic impedance of the transmission line.

From the given values, we have:
Zg = (100 + j0) Ω
Z0 = (75 + j0) Ω

Substituting these values into the formula, we get:
Γg = (100 - 75)/(100 + 75) = 0.125

Therefore, the value of the generator reflection coefficient is 0.125 (to three decimal places).

Answer: 0.125


Question 10: What is the value of the load reflection coefficient?

To find the load reflection coefficient, we can use the formula:
ΓL = (ZL - Z0)/(ZL + Z0)
where ZL is the load impedance, and Z0 is the characteristic impedance of the transmission line.

From the given values, we have:
ZL = (75 - j100) Ω
Z0 = (75 + j0) Ω

Substituting these values into the formula, we get:
ΓL = (75 - j100 - 75)/(75 - j100 + 75) = -0.8 - j0.6

Therefore, the value of the load reflection coefficient is -0.8 - j0.6 (to three decimal places).
Answer: -0.8 - j0.6

To know more about load reflection here :

https://brainly.com/question/30551648

#SPJ11

Label which image below shows the left knee, and which image shows the right knee.

Answers

The right shows the left knee

Suppose an oxygen atom has 8 protons and 7 electrons. How woud it be classified? Trick question. This isn't oxygen at all becuase the number of protons is not correct. Negative ion of Oxygen Neutral Oxygen atom Positive ion of Oxygen

Answers

Assuming the given atom to be a negatively charged ion of oxygen, it would be classified as an oxide ion (O2-), while a neutral oxygen atom would be simply called oxygen (O), and a positively charged ion of oxygen would be an oxygen cation or oxonium ion (O+).

The given configuration of an atom with 8 protons and 7 electrons is not that of an oxygen atom, as oxygen atoms have 8 electrons and 8 protons in their nuclei. However, if we assume that the atom is a negatively charged ion of oxygen, it would be classified as an oxide ion (O2-), which is a stable anion of oxygen.

If it were a neutral oxygen atom, it would simply be classified as oxygen (O), while a positively charged ion of oxygen would be called an oxygen cation or oxonium ion (O+).

To know more about protons, here

brainly.com/question/19361294

#SPJ4

Suppose we have a 1-m and 3-m diameter telescope. How does the light gathering power of the 3-m telescope compare to the 1-m telescope?
Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer.
A. It is 9 times smaller
B. It is 3 times smaller
C. They are the same
D. It is 3 times bigger
E. It is 9 times bigger

Answers

It is D. It is 3 times bigger. The light-gathering power of a telescope is proportional to the area of its primary mirror or lens. The area of a circle is proportional to the square of its diameter, so the area of the 1-m telescope is π/4 square meters, while the area of the 3-m telescope is 9π/4 square meters.

Therefore, the light-gathering power of the 3-m telescope is 9/4 times greater than that of the 1-m telescope, or 2.25 times greater if we compare the ratios directly.

This means that the 3-m telescope can collect 2.25 times more light than the 1-m telescope. This increased light-gathering power translates to a significant advantage in observing fainter objects and detecting finer details in objects. The larger telescope can also resolve objects that are closer together, enabling astronomers to observe celestial bodies.

The 3-m telescope would also have a better angular resolution, meaning it can discern finer details in the objects it observes. This is because the angular resolution of a telescope is determined by the ratio of the wavelength of the observed light to the diameter of the telescope's primary mirror or lens.

Overall, the larger 3-m telescope has a much greater light-gathering power and resolving power, making it a much more powerful tool for astronomers than the 1-m telescope.

For more details about telescope click here:

https://brainly.com/question/19349900#

#SPJ11

what is the wavelength (in m) of the carrier wave of a campus radio station, broadcasting at a frequency of 102.2 mhz (million cycles per second or million hertz)?

Answers

The wavelength of the carrier wave of a campus radio station broadcasting at a frequency of 102.2 MHz is approximately 2.94 meters, calculated using the formula wavelength = speed of light/frequency.

The wavelength of the carrier wave of a radio station can be calculated using the formula:

wavelength = speed of light/frequency

where the speed of light is approximately [tex]3 x 10^8 m/s[/tex].

Plugging in the frequency of the campus radio station, which is 102.2 MHz or [tex]102.2 x 10^6 Hz[/tex], we get:

wavelength [tex]= 3 x 10^8 m/s / 102.2 x 10^6 Hz = 2.93[/tex] meters

Therefore, the wavelength of the carrier wave of the campus radio station is 2.93 meters.

It's important to note that the wavelength of a radio wave is inversely proportional to its frequency. This means that as the frequency of the wave increases, its wavelength decreases, and vice versa.

learn more about  radio station here:

https://brainly.com/question/29803733

#SPJ4

What’s the author main purpose in writing this article? In do Juvenill Killer Desert

Answers

Modest evidence suggests that young people who commit crimes deserve to service their entire lives in prison. Modicum demonstrates that despite the fact that children commit crimes, they do not merit the harsh punishment Dutton received while incarcerated.

The court stated that because of their youth, they are more impulsive, more susceptible to social pressure, and less able to see the repercussions of their actions. Their brains are also reportedly less developed. There are 79 of these juvenile killers alive today; they will all perish in jail.
Context is crucial when discussing juvenile punishment instances. The juvenile death sentence was abolished by the Supreme Court in 2005 on the grounds that children are not the same as adults. Younger people, according to the court, have brains that are actually less developed, are more impulsive, are more susceptible to social pressure, and are less able to see the effects of their actions.
To know more about Dutton go through:-

https://brainly.com/question/21463976

#SPJ4

to investigate the issue of juvenile offenders in the United States receiving life sentences without the possibility of release.

The article's primary goal is to draw attention to the problem of juvenile offenders in the United States receiving life sentences without the possibility of release. In this article, the impact of this sentencing strategy on juvenile offenders is examined, and the fairness of such sentences is questioned. The author's claim that these punishments are ineffectual and unjust is supported by data and evidence. The paper also urges a shift in strategy and offers substitutes that give young offenders priority in rehabilitation and restorative justice.

learn more about juvenile offenders here;

https://brainly.com/question/15245008

#SPJ4

emission and absorption light events create the opportunity for color to be observed, but why are roses red and violets blue? each color is associated with a specific region of the electromagnetic spectrum.

Answers

The colors that we see in objects, including flowers like roses and violets, depend on the pigments they contain and the way that those pigments interact with light.

When light shines on an object, some of the light is absorbed by the object, while the rest is reflected. The color that we perceive is the color of the light that is reflected by the object.

In the case of roses, the petals contain pigments called anthocyanins, which absorb light in the green to yellow range of the spectrum and reflect light in the red to purple range. This is why we perceive roses as being red or purple.

Violets, on the other hand, contain pigments called violaxanthin and anthocyanins, which absorb light in the blue and violet range of the spectrum and reflect some light in the blue range. This is why we perceive violets as being blue.

Learn more about color here:

https://brainly.com/question/30186758

#SPJ11

study the given diagram and calculate the pressure exerted by water at the bottom of the tank. the density of water is 1000kg/m³​

Answers

Answer:

To calculate the pressure exerted by water at the bottom of the tank, we need to use the formula:

Pressure = Density x Gravity x Height

where:

Density = 1000 kg/m³ (density of water)

Gravity = 9.81 m/s² (acceleration due to gravity)

Height = 12 m (height of the tank)

Substituting the values in the formula, we get:

Pressure = 1000 kg/m³ x 9.81 m/s² x 12 m

Pressure = 117,720 Pa (Pascals)

Therefore, the pressure exerted by water at the bottom of the tank is 117,720 Pascals.

An appliance manufacturer has redesigned its original electric fan. It has made the new fan more energy efficient. This means the new fanconverts more electricity into heat.spins at a lower rate than the original fan.requires more electricity than the original fan.reduces the percentage of heat lost to the atmosphere.

Answers

The authentic electrical fan was re - designed by a gadget producer. It has made the current fan more environmentally friendly. This indicates that now the new fan. diminishes the proportion of heat losses towards the environment. (d) is the correct option .

What is the thing that is different among kinetic and mechanical energy?

The thing that is different between energetics and mechanical energy would be that kinetic is a kind of electricity, while elastic deformation is a form something which energy takes.

For example, a bow which is being pulled and a bow that is shooting an arrows are both instances of kinetic motion. Yet, they don't really both contain the very same sort of energy.

The major connection that they share is their capacity for transforming toward one another. To put it another way, potential energy becomes kinetic energy.

To know more about potential click here

brainly.com/question/9605409

#SPJ4

what is a helium flash? what is a helium flash? it is the ignition of helium shell fusion in a high-mass star with a carbon core. it is the sudden onset of helium fusion in the core of a low-mass star. it is a sudden brightening of a low-mass star, detectable from earth by observing spectral lines of helium. it is another name for the helium fusion reaction.

Answers

A helium burst is a very brief exergonic nuclear fusion of enormous quantities of helium into carbon using the triple-alpha mechanism that occurs inside the core of low mass stars (between 0.8 and 2.0 M).

What on the HR diagram is a helium flash?

The helium flash Helium fusion starts when the helium-rich core at the RGB's tip ignites. The star moves quickly to the Horizontal Branches region of the H-R diagram as a result of the core's ignition.

Describe the helium flash. How does it affect a fading star?

Helium flash refers to the sudden commencement of helium fission in a low-mass star's core. The star then stabilises and momentarily shrinks in size and brilliance. Fusion comes to an end when the core's supply of helium is depleted in planets with masses of up to twice that of the Moon or less.

To know more about nuclear visit:

https://brainly.com/question/18187269

#SPJ1

1. You sit atop of a 500 m hill on your bike. The combined mass of you and your bike is 75 kg. How much potential energy have you gained atop of the hill?

2. If you ride quickly down the hill without braking but losing half of the potential energy due to air resistance. How fast will you be traveling at the bottom of the hill?

3. Emily is testing her baby’s bath water and finds that it is too cold, so she adds some hot water from a kettle on the stove. If Emily adds 2.00 kg of water at 80.0◦C to 20.0 kg of bath water at 27.0◦C, what is the final temperature of the bath water?


Answers

1.  you have gained 367,500 J of potential energy atop of the hill.

The potential energy gained atop the hill can be calculated using the formula:

potential energy = mass x gravity x height.

mass = 75 kg

gravity = 9.8 m/s^2 (acceleration due to gravity)

height = 500 m

Potential energy gained = 75 kg x 9.8 m/s^2 x 500 m = 367,500 J

Therefore, you have gained 367,500 J of potential energy atop of the hill.

2.  you will be traveling at approximately 34.26 m/s (or about 123.3 km/h) at the bottom of the hill.

The potential energy lost due to air resistance can be calculated by multiplying the initial potential energy gained by 0.5, since half of it is lost.

Potential energy lost = 0.5 x 367,500 J = 183,750 J

The kinetic energy gained by you and your bike at the bottom of the hill will be equal to the initial potential energy gained minus the potential energy lost due to air resistance.

Kinetic energy gained = (potential energy gained - potential energy lost)

Kinetic energy gained = (367,500 J - 183,750 J) = 183,750 J

The kinetic energy gained can be expressed as:

kinetic energy = 1/2 x mass x velocity^2

mass = 75 kg (combined mass of you and your bike)

velocity = unknown

Solving for velocity, we get:

velocity = sqrt((2 x kinetic energy) / mass)

velocity = sqrt((2 x 183,750 J) / 75 kg)

velocity ≈ 34.26 m/s

Therefore, you will be traveling at approximately 34.26 m/s (or about 123.3 km/h) at the bottom of the hill.

3. The final temperature of the bath water is approximately 9.68°C.

The specific heat capacity of water is 4.18 J/g°C. To calculate the final temperature of the bath water, we can use the equation:

heat gained by cold water = heat lost by hot water

The heat gained by the cold water (20.0 kg at 27.0°C) can be expressed as:

heat gained = mass x specific heat capacity x change in temperature

mass = 20.0 kg

specific heat capacity = 4.18 J/g°C

change in temperature = final temperature - initial temperature = final temperature - 27.0°C

The heat lost by the hot water (2.00 kg at 80.0°C) can be expressed as:

heat lost = mass x specific heat capacity x change in temperature

mass = 2.00 kg

specific heat capacity = 4.18 J/g°C

change in temperature = 80.0°C - final temperature

Since the heat gained and lost are equal, we can equate the two expressions and solve for the final temperature:

mass x specific heat capacity x (final temperature - 27.0°C) = mass x specific heat capacity x (80.0°C - final temperature)

20.0 kg x 4.18 J/g°C x (final temperature - 27.0°C) = 2.00 kg x 4.18 J/g°C x (80.0°C - final temperature)

83.6 x (final temperature - 27.0) = 8.36 x (80.0 - final temperature)

83.6 x final temperature - 83.6 x 27.0 = 668.8 - 8.36 x final temperature

91.96 x final temperature = 891.2

final temperature = 9.68°C

Therefore, the final temperature of the bath water is approximately 9.68°C.

To know more about thepotential energy, visit:

https://brainly.com/question/12807194

#SPJ1

A batter strikes a baseball of mass 0.85 kg, and the time of impact between the bat and the ball is 0.01 s. If the ball acquires a velocity of 82 m/s after the hit, calculate the average force exerted on the ball.

What's the Solution?

Answers

Answer:

6970 N

Explanation:

To calculate the average force exerted on the ball, we can use the impulse-momentum theorem, which states that the impulse on an object is equal to its change in momentum. In equation form:

Impulse = Δp

where Impulse is the force applied over a given time, and Δp is the change in momentum of the object.

We can calculate the momentum of the ball before the hit as:

p1 = m * v1

where m is the mass of the ball and v1 is its initial velocity (which we assume to be zero). Substituting the given values, we get:

p1 = (0.85 kg) * 0 m/s = 0 kg m/s

The momentum of the ball after the hit is:

p2 = m * v2

where v2 is the final velocity of the ball (82 m/s). Substituting the given values, we get:

p2 = (0.85 kg) * 82 m/s = 69.7 kg m/s

The change in momentum (Δp) is therefore:

Δp = p2 - p1 = 69.7 kg m/s - 0 kg m/s = 69.7 kg m/s

The impulse on the ball is equal to the change in momentum, so we have:

Impulse = Δp = 69.7 kg m/s

Finally, we can calculate the average force exerted on the ball using the formula:

Impulse = Force * time

Substituting the given values, we get:

69.7 kg m/s = Force * 0.01 s

Solving for Force, we get:

Force = 6970 N

Therefore, the average force exerted on the ball by the bat is 6970 Newtons.

a baseball with a mass of 155.7 grams is dropped off the roof of wyly tower which is 46.6 meters above the sidewalk below. ignoring the effects of wind resistance and drag, what is the velocity of the ball right before it hits the ground? how much kinetic energy does the ball have right before impact?

Answers

We can solve this problem using the conservation of energy principle:

Initial potential energy = Final kinetic energy

The initial potential energy is equal to the potential energy at the top of the tower:

PE = mgh

where m is the mass of the ball, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the tower (46.6 m).

PE = (0.1557 kg)(9.81 m/s^2)(46.6 m) = 71.9 J

The final kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

Since the ball was dropped from rest, its initial velocity was zero. Therefore, all of the potential energy at the top of the tower is converted to kinetic energy just before impact.

PE = KE

71.9 J = 1/2 (0.1557 kg) v^2

v^2 = (2 × 71.9 J) / 0.1557 kg = 828.6

v = sqrt(828.6) = 28.8 m/s (rounded to one decimal place)

The velocity of the ball just before impact is 28.8 m/s.

The kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

KE = 1/2 (0.1557 kg) (28.8 m/s)^2 = 61.7 J (rounded to one decimal place)

Therefore, the ball has 61.7 J of kinetic energy just before impact.

Other Questions
Find the value of x given the area of the quadrilateral. A=48 in.2 Whats is the perimeter and area of 14.3 yds and 12 yds disinflation is so costly to the economy, because if: a a stagflation is forced on the economy, unemployment increases and inflation increases. b a recession is forced on the economy, unemployment increases and aggregate output falls. c a recession is forced on the economy, unemployment decreases and aggregate output falls. d a deflation is forced on the economy, employment decreases and aggregate output falls. e a high inflation is forced on the economy, unemployment decreases and aggregate price level increases. how did the formation of the triple alliance and the triple entente contribute to the start of world war i? the fact that every dollar that the government spends or transfers must ultimately be provided by the taxes and user charges it collects plus government borrowing is known as the a) government balance sheet constraint. b) government budget constraint. c) tax collection constraint d) user charge constraint. Helena drops a ball from 25 feet above a lake. The formula t= 1/425-h describes the time t in seconds that the ball is h feet above the water. How many feet above the water will the ball be after 1 second? HELP ME QUICK what is 6:12 in the simplest form In which of the following scenarios will conducting a paired -test for means be appropriate? CHECK ALL THAT APPLY. A. To test if the proportion of low-income families is higher than that of high-income families in British Columbia. B. To test if there is a difference between the mean number of CD4 T cells in healthy patients and patients with cancer. C. To test if the mean annual income of Ontarians is higher than that of British Columbians. D. To test if there is a difference between the mean annual income of husbands and that of their wives in Canada. E. To test if there is a difference between the mean number of antibodies in patients before surgery and after surgery. F. To test if there is a difference between the mean annual income of male British Columbians and that of female British Columbians. G. None of the above a network technician has recently installed a new wireless access point on the company's wireless network. all the settings for the new access point were copied from the baseline. due to this change, the network technician is getting reports from the sales department that they are having irregular wireless connectivity, while other departments are having no such problem. what can be the possible cause of the issue mentioned in the given scenario? Translate the given conformer from the wedge-and-dash drawing into its Newman projection.Select the correct Newman projection using one of the tabs below, and drag the three groups (Cl, Br, and CH3) to their correct locations. what forces in modern european society might have contributed to force individuals into repressive modes of thinking and acting? if the same company from the previous question used 6% ror for loans, 10% ror for bonds, and 15% ror for stocks, and also used a 50% tax rate, what is the wacc? enter the answer as a percentage. for example 12.34% is 12.34. keep 2 decimal places and do not enter the % symbol. in a competitive price taker market, a firm's short-run supply curve is its a. average total cost curve above its average variable cost curve. b. marginal cost curve above its average variable cost curve. c. marginal cost curve above its average fixed cost curve. d. entire marginal cost curve. During a point, if the ball lands on any portion of the line, it:____.a. is out. b. must be replayed. c. is in.d. requires the returning player to turn around before hitting the ball. what is the correct order? During an El Nio event, the South Equatorial Current reverses direction and flows over the top of northern portions of the Peru Current, causinganswer choiceswarmer surface ocean waters along the northeast coast of South Americawarmer surface ocean waters along the northwest coast of South Americacooler surface ocean waters along the northeast coast of South Americacooler surface ocean waters along the northwest coast of South America List three conditions that would alter the activity of an enzyme. Be specific with your explanation What is the hydroxide ion concentration and the pH for a hydrochloric acid solution that has a hydronium ion concentration of 1.50 10-3 M?A) 6.67 10-12 M, 11.17B) 6.67 10-11 M, 3.82C) 6.67 10-12 M, 2.82D) 6.67 10-11 M, 10.18 Who among the following individuals is most likely suffering from sleep apnea?A. Fiona, who stopped breathing for about 10 seconds while asleep and awakened from sleep while gasping for breathB. Susan, who fell asleep suddenly while walking across a roomC. Alex, who yelled for help and leapt out of bed while dreaming during REM sleepD. Ryan, who walked into a wall while asleep and then returned to bed without any recollection of the walk pls help!!Which two factors helped lead to the collapse of the Soviet Union?Communist bloc countries wanted to retain their communist governments.Freedom of speech declined in the country.Gorbachev took a stance of nonintervention in communist bloc uprisings.The leader of the country was willing to make changes.Peace within the Soviet Union allowed groups to agree on the decision to end the country.