A racehorse gallops at a speed of 65 km / h. how long will it take to reach the finish line in a 1,500 m race?

Answer:

The amount of gravitational force INCREASES as the distance between two objects increases; thus, an astronauts weight DECREASES as she or he moves away from earth into space.

hope this helped.

Boyle's law describes the relationship between pressure and volume.

More specifically, it states that the relationship between these two quantities is inversely proportional. It is important to remember that Boyle's law only applies to ideal gases and situations when the temperature is constant.

Boyle's law, named after the physicist Robert Boyle, states that for a given amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other.

This means that as the pressure on a gas increases, its volume decreases, and vice versa, as long as the temperature remains constant.

Mathematically, Boyle's law can be expressed as:

P₁V₁ = P₂V₂

where P₁ and V₁ represent the initial pressure and volume, respectively, and P₂ and V₂ represent the final pressure and volume, respectively.

Boyle's law is derived from the kinetic theory of gases and is applicable to ideal gases under specific conditions. It assumes that the gas particles are point masses with negligible volume and that there are no intermolecular forces between them.

Additionally, Boyle's law assumes that the temperature remains constant during the process.

It's important to note that Boyle's law is not applicable to all gases in all situations. Real gases may deviate from ideal behavior, especially at high pressures or low temperatures, where intermolecular forces become more significant.

In such cases, additional corrections or other equations of state may be needed to describe the behavior of the gas accurately.

To learn more about volume, refer below:

https://brainly.com/question/1578538

#SPJ11

The approach to motivation that emphasizes the role of species-specific instincts in directing behavior is called the Instinct Theory of Motivation.

This theory suggests that certain innate, fixed patterns of behavior, known as instincts, are responsible for motivating actions and reactions within specific species. These instincts have evolved over time due to their contribution to the survival and reproductive success of the species.

For example, the fight or flight response, which is a common instinct among many animals, helps protect them from predators and ensures their survival. Another example is the maternal instinct observed in many mammal species, which promotes nurturing and protective behaviors towards their offspring, ultimately benefiting their survival and reproduction.

Instinct Theory of Motivation has its roots in the work of early psychologists like William James and Sigmund Freud, who believed that instincts played a significant role in shaping human behavior. However, it is important to note that while instincts do influence motivation, they are not the only factors at play. Other approaches, such as the drive-reduction theory and cognitive theories, also contribute to our understanding of motivation and behavior.

To know more about Instinct Theory of Motivation, refer here:

https://brainly.com/question/31586201#

#SPJ11

1. DISAGREE: An RPE of 10 means the activity is extremely hard.
2. AGREE: Swimming and playing basketball are vigorous activities.
3. AGREE: Street and hip-hop dances are active recreational activities.
4. DISAGREE: Proper execution of dance steps reduces the risk of injuries.
5. AGREE: A normal nutritional status means that weight is proportional to the height.
6. AGREE: Physical inactivity and unhealthy diet are risk factors for heart disease.
7. AGREE: Risk walking and dancing are activities which are of moderate intensity.
8. AGREE: One can help the community by sharing his/her knowledge and skills in dancing.
9. DISAGREE: Surfing on the internet and playing computer games do not greatly improve one's fitness.
10. DISAGREE: A physically active person engages in at least 150 minutes of moderately vigorous physical activity per week.

Visit https://brainly.com/question/1133404 to know more about activities

#SPJ11

The magnetic field inside the loop of wire will be directed into the page. Option b is correct.

When a current flows through a loop of wire, it generates a magnetic field around it. The direction of the magnetic field can be determined using the right-hand rule. If you curl the fingers of your right hand in the direction of the conventional current (from right to left in this case), your thumb will point in the direction of the magnetic field inside the loop. In this scenario, the current flows up the right side of the loop, then around the top and back down the left side.

Using the right-hand rule, the magnetic field inside the loop is directed into the page. This is because the magnetic field lines form a loop inside the wire, and the direction of the field is perpendicular to the plane of the loop, pointing into the center of the loop. Option b is correct.

To know more about magnetic field, here

brainly.com/question/14848188

#SPJ4

The change in velocity of the ball is 6 m/s, and the change in momentum is -0.35 kg·m/s.

(a) The change in the ball's velocity is the difference between its final velocity (2.5 m/s) and its initial velocity (-3.5 m/s):

Change in velocity = final velocity - initial velocity

Change in velocity = 2.5 m/s - (-3.5 m/s)

Change in velocity = 6 m/s

(b) The change in the ball's momentum is given by the impulse it experiences during the collision with the floor.

The impulse is equal to the change in momentum, which is equal to the product of the force exerted on the ball and the time the force is applied.

Assuming the collision is perfectly elastic, the magnitude of the impulse is twice the ball's initial momentum:

Change in momentum = 2 x (mass x initial velocity)

Change in momentum = 2 x (0.25 kg x (-3.5 m/s))

Change in momentum = -0.35 kg·m/s

Thus, the change in velocity of the ball is 6 m/s, and the change in momentum is -0.35 kg·m/s.

To know more about velocity, refer here:

https://brainly.com/question/30559316#

#SPJ11

Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

In 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.

More on Hubble's relation can be found here: https://brainly.com/question/29752713

#SPJ1

The amount of heat transferred to the wooden beam if it has mass 60kg is 70800 J

Amount is a mathematical concept that refers to the quantity or size of something. It can be used to describe a numerical value, such as a monetary amount, a quantity of units of measurement, or a count of items. Amounts can also be expressed in terms of fractions, decimals, or percentages. In everyday use, it is often used to refer to the total sum of money, goods, or services involved in a transaction. For example, when discussing a purchase, one might say "the amount was $25." Amount is also used in a more general sense, to refer to a large quantity or number of something. For example, one might say "there was a huge amount of people at the event."

Heat transferred (Q) = mass (m) x specific heat capacity (c) x change in temperature (ΔT)
Q = 60 kg x 0.84 J/g°C x (35°C - 15°C)
Q = 70800 J

To learn more about amount
https://brainly.com/question/29217523
#SPJ4

The force exerted on the 0.04 kg arrow, which accelerated at 7,000 m/s² to reach a speed of 60.0 m/s, is 280 N.

To calculate the force exerted on the arrow, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = m*a). In this case, the mass of the arrow (m) is 0.04 kg, and its acceleration (a) is 7,000 m/s².

Step 1: Identify the mass (m) and acceleration (a) of the arrow.
m = 0.04 kg
a = 7,000 m/s²

Step 2: Apply Newton's second law of motion (F = m*a) to calculate the force (F).
F = 0.04 kg * 7,000 m/s²

Step 3: Multiply the mass and acceleration values to obtain the force.
F = 280 N

Therefore, the force exerted on the arrow is 280 Newtons.

Know more about Newton's second law of motion click here:

https://brainly.com/question/27712854

#SPJ11

Answer:

M1 V1 + M2 V2 = 0     the center of mass remains at zero since no external forces are present

Ex:     V1 = - M2 / M1 * V2

The static shock is caused by the transfer of electrons between surfaces, creating an electric charge buildup that ionizes air molecules, resulting in a spark. Electrons and ions are the subatomic particles involved.

When a person experiences a static shock, it is due to the buildup of excess electric charge on the surface of their body. This excess charge is caused by the transfer of electrons between two surfaces that come into contact and then separate. The transfer of electrons causes an imbalance of charges, resulting in a buildup of static electricity.

The electric charge buildup creates an electric field that can be strong enough to ionize air molecules. This ionization creates a plasma, which is a gas made up of ionized particles. The plasma channels the electric charge from the person's body to the surrounding air, creating a spark that we see as a static shock.

The subatomic particles involved in this process are electrons and ions. Electrons are negatively charged subatomic particles that are transferred between surfaces to create a buildup of static electricity. Ions are atoms or molecules that have gained or lost electrons, resulting in a positive or negative charge.

In summary, a static shock occurs due to the transfer of electrons between surfaces, creating an imbalance of electric charge on the person's body.

This electric charge buildup ionizes air molecules, creating a plasma that channels the electric charge to the surrounding air, resulting in a spark that we see as a static shock. The subatomic particles involved in this process are electrons and ions.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

The frequency of the pendulum is 0.397 Hz, which means that the pendulum completes 0.397 cycles per second. This value can also be expressed as 23 cycles per 58 seconds or 46 cycles per 116 seconds, etc.

The frequency of a wave or oscillation is defined as the number of cycles completed per unit time. In this case, we are given that a pendulum completes 23 full cycles in 58 seconds. Therefore, the frequency of the pendulum can be calculated by dividing the number of cycles by the time taken.

Frequency = Number of cycles / Time

Substituting the given values, we get:

Frequency = 23 / 58

Frequency = 0.397 Hz

Therefore, the frequency of the pendulum is 0.397 Hz, which means that the pendulum completes 0.397 cycles per second. This value can also be expressed as 23 cycles per 58 seconds or 46 cycles per 116 seconds, etc.

The period of the pendulum can be calculated by taking the reciprocal of the frequency, i.e., the time taken for one complete cycle. In this case, the period is 2.52 seconds (1 / 0.397), which means that it takes the pendulum 2.52 seconds to complete one full swing.

To know more about frequency refer here:

https://brainly.com/question/30751571#

#SPJ11

The common final equilibrium temperature of the mixture is 61.47°C

To solve this problem, we need to use the principle of conservation of energy, which states that the total amount of energy in a system is constant. We can start by calculating the amount of energy required to melt the ice and raise the temperature of the resulting water to the final equilibrium temperature. This energy will be equal to the amount of energy lost by the calorimeter and the water.

First, we need to calculate the amount of heat absorbed by the ice to melt it. This can be done using the formula:

Q = m × Lf

where Q is the amount of heat absorbed, m is the mass of the ice, and Lf is the latent heat of fusion for ice. Plugging in the values given, we get:

Q = 37.2 g × 333 kJ/kg = 12,395.6 J

Next, we need to calculate the amount of heat required to raise the temperature of the resulting water to the final equilibrium temperature. This can be done using the formula:

Q = m × c × ΔT

where Q is the amount of heat required, m is the mass of the water, c is the specific heat of water, and ΔT is the change in temperature. Since the final equilibrium temperature is not known, we will use T as a variable.

The mass of the water in the calorimeter is:

180 g = 0.18 kg

The mass of the calorimeter itself is:

60 g = 0.06 kg

So the total mass of the system is:

0.18 kg + 0.06 kg + 0.0372 kg = 0.2772 kg

Now we can set up an equation to solve for the final equilibrium temperature:

12,395.6 J + (0.06 kg × 0.42 J/g. °C × ΔT) + (0.18 kg × 4186 J/kg. °C × ΔT) = (0.2772 kg × c × ΔT)

Simplifying and solving for ΔT, we get:

ΔT = 32.47°C

So the final equilibrium temperature of the mixture is:

29°C + 32.47°C = 61.47°C

To know more about the conservation of energy, click here;

https://brainly.com/question/13949051

#SPJ11

Isabela's acceleration was [tex]0.8 m/s^2[/tex]. We can use the following formula to find the acceleration:

a = (vf - vi) / t

where

a is the acceleration,

vf is the final velocity,

vi is the initial velocity, and

t is the time interval.

Using the given values:

vi = 3 m/s

vf = 5.4 m/s

t = 5 s - 2 s

 = 3 s

a = (5.4 m/s - 3 m/s) / 3 s

a = 0.8 [tex]m/s^2[/tex]

Therefore, Isabela's acceleration was 0.8 [tex]m/s^2[/tex].

To know more about acceleration refer here

brainly.com/question/12550364#

#SPJ11

Two cars X and Y start from two points separated by 75 m. Y which is ahead of X. starts from rest with acceleration of 10 m/s2 and X starts with uniform velocity of 40 m/s . The time gap between the two meetings would be approximately 1.44 seconds.

Let's assume that the two cars meet for the first time after time t₁, and then they meet for the second time after time t₂.

We can start by finding the time it takes for car Y to catch up to car X for the first time. We can use the following kinematic equation:

d = ut + (1/2)at²

where d is the distance between the two cars, u is the initial velocity of car X, a is the acceleration of car Y, and t is the time it takes for car Y to catch up to car X.

Plugging in the values, we get:

75 = 40t₁ + (1/2)(10)t₁²

Simplifying the equation, we get:

5t₁² + 8t₁ - 15 = 0

Solving for t1 using the quadratic formula, we get:

-t₁ = 1.5 seconds or -1 seconds

Since time cannot be negative, we discard the negative solution and conclude that the two cars meet for the first time after 1.5 seconds.

Now, let's find the time it takes for the two cars to meet for the second time. We can use the fact that the two cars have covered the same distance between their first and second meetings.

The distance covered by car Y during the time t₁ is:

d₁ = (1/2)(10)(1.5)² = 11.25 m

The distance remaining between the two cars is:

75 - 2d₂ = 52.5 m

To find the time it takes for car Y to cover this distance, we can use the same kinematic equation as before:

52.5 = 0t₂ + (1/2)(10)t₂²

Simplifying the equation, we get:

t₂ = (21)

Therefore, the time gap between the two meetings is:

t₂ - t₁ = √(21) - 1.5 seconds

So, the time gap between the two meetings is approximately 1.44 seconds.

To know more about  acceleration

https://brainly.com/question/13397622

#SPJ1

The frequency of the first harmonic played by the instrument is approximately 990.7 Hz.

The frequency of the first harmonic played by the instrument can be calculated using the formula:

f = v / (2L)

where f is the frequency, v is the speed of sound in the test tube, and L is the length of the air column in the test tube.

The speed of sound in test tube is, 340 m/s.

In this case, L = 17.2 cm = 0.172 m. Substituting the given values into the formula, we get:

f = 340 m/s / (2 * 0.172 m)

f = 990.7 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

If you look at them with a telescope that has an angular resolution of 0. 5 arcsecond, you will see two distinct stars. Therefore, the correct statement is option A.

An angular resolution of 0.5 arcseconds means that the telescope can distinguish between two objects that are at least 0.5 arcseconds apart. This is because angular resolution is the smallest angle between two objects that can be distinguished as separate entities.

In this case, if the two stars are separated by more than 0.5 arcseconds, they will be seen as two distinct stars. However, if they are separated by less than 0.5 arcseconds, they may appear as a single blurred image, which is known as the telescope's point spread function.

This is because the light from each star is diffracted by the telescope's aperture, causing them to overlap and blur together.

If the stars are separated by more than the telescope's angular resolution, they will be seen as separate and distinct points of light. Therefore, option (a) is the correct statement.

In summary, with an angular resolution of 0.5 arcseconds, a telescope can distinguish between two objects that are at least 0.5 arcseconds apart.

If the two stars are separated by more than 0.5 arcseconds, they will appear as two distinct stars, but if they are closer together, they may appear as a single blurred image.

To know more about angular resolution refer here:

https://brainly.com/question/30575514#

#SPJ11

Complete Question:

Choose the correct statement describing, what will you see if you look at them with a telescope that has an angular resolution of 0.5 arcsecond.

a. Two distinct stars.

b. One point of light that is the blurred image of both stars.

c. Nothing at all.

When fertilizers enter surface water, they can cause several problems in the watershed:

1. Eutrophication:  Fertilizers contain nutrients such as nitrogen and phosphorus, which are essential for plant growth. However, when these nutrients enter surface water bodies through runoff or leaching, they can lead to excessive nutrient enrichment, a process called eutrophication. This excessive nutrient load stimulates the growth of algae and aquatic plants, resulting in algal blooms and dense vegetation. These blooms can deplete oxygen levels in the water, leading to hypoxia or even anoxia, which can harm or kill fish and other aquatic organisms.

2. Harmful Algal Blooms (HABs):  Excessive nutrients from fertilizers can promote the growth of harmful algal species, known as harmful algal blooms (HABs). These algae produce toxins that can be detrimental to the health of aquatic organisms, including fish, shellfish, and other wildlife. In addition, some of these toxins can contaminate the water, making it unsafe for human use and posing risks to public health.

3. Disruption of Aquatic Ecosystems: Fertilizer runoff can alter the natural balance and composition of aquatic ecosystems. Excessive plant growth due to nutrient enrichment can outcompete native species, leading to a decline in biodiversity. Changes in species composition can disrupt ecological interactions, such as predator-prey relationships and competition, which can have cascading effects on the entire ecosystem.

4. Degraded Water Quality: Fertilizers can contribute to water pollution by introducing excess nutrients into surface water. Besides promoting algal growth, these nutrients can also affect water quality by causing increased turbidity, reduced clarity, and altered pH levels. Such changes can negatively impact aquatic organisms and their habitats, as well as limit recreational activities and drinking water resources.

5. Nutrient Transport to Coastal Areas: Fertilizer runoff from watersheds can be transported to coastal areas through rivers and streams. The excess nutrients can contribute to the development of coastal dead zones, where oxygen levels are severely depleted, resulting in the loss of marine life and disrupting fisheries and recreational activities.

To mitigate these problems, it is crucial to adopt sustainable farming practices, such as precision agriculture, where fertilizers are applied in a targeted and controlled manner. Implementing buffer zones, constructed wetlands, and other best management practices can help filter and reduce nutrient runoff into surface water.

Additionally, public awareness and education about proper fertilizer use and the importance of protecting water resources are essential for minimizing the impacts of fertilizer runoff on watersheds.

To know more about fertilizers refer here

https://brainly.com/question/3204813#

#SPJ11

The formula for the horizontal range is dependent on the initial velocity, angle of projection, and acceleration due to gravity. Therefore, the formula is [tex]range = velocity\;horizontal \times 2V0y / g \times sin\theta[/tex]

The range of a projectile refers to the horizontal distance it covers during its flight. To derive a formula for the horizontal range of a projectile, we can use the kinematic equations.

The horizontal motion of a projectile is constant, and we can use the equation:

distance = velocity × time

In the horizontal direction, the initial velocity of the projectile remains constant throughout its flight. Thus, the horizontal distance traveled can be calculated as:

range = velocity horizontal × time

To determine the time, we can use the vertical motion equation:

[tex]y = V0y \times t + 1/2 gt^2[/tex]

Where y is the vertical displacement, V0y is the initial vertical velocity, g is the acceleration due to gravity, and t is the time.

We know that at the maximum height, the vertical velocity is zero. Thus, the time taken to reach maximum height is:

t = V0y / g

The time taken for the projectile to reach the ground from the maximum height is also equal to t.

Substituting this value of t into the horizontal distance equation gives:

[tex]range = velocity\;horizontal \times 2V0y / g \times sin\theta[/tex]

where θ is the angle of projection.

In summary, the horizontal range of a projectile can be derived using kinematic equations by considering the horizontal motion and vertical motion of the projectile. The formula for the horizontal range is dependent on the initial velocity, angle of projection, and acceleration due to gravity.

To know more about velocity refer here:

https://brainly.com/question/19979064#

#SPJ11

The Andromeda Galaxy distance is approximately 2.52 million light-years away from us.

The Andromeda Galaxy (M31) is indeed similar to our own Milky Way galaxy, but slightly larger with a linear diameter of 140,000 light-years along its longest axis. To determine its distance from us, we can use the angular diameter, which is 3.18°.

We can use the small-angle formula to find the distance. This formula relates the angular diameter (in radians), the actual diameter, and the distance between the observer and the object:

angular diameter (radians) ≈ actual diameter / distance

First, we need to convert the angular diameter from degrees to radians:

3.18° * (π radians / 180°) ≈ 0.0555 radians

Now, plug in the values into the small-angle formula:

0.0555 radians ≈ 140,000 light-years / distance

To solve for the distance, divide both sides of the equation by 0.0555 radians:

distance ≈ 140,000 light-years / 0.0555 radians
distance ≈ 2,522,522 light-years

For more about distance:

https://brainly.com/question/15172156

#SPJ11

The statement describes an irregularly shaped object experiencing four forces in the x-y plane, and elaborating on its nature, the magnitude and direction of the forces, and their intended outcome provides more context to the scenario.

The given statement describes a scenario in which an object of irregular shape is subjected to four forces acting in the x-y plane. To rephrase this statement, one could start by stating that there is an object, the shape of which is not uniform or regular, and this object is experiencing the influence of four different forces.

These four forces have been designated as 1, 2, 3, and 4, and all of them are acting within the x-y plane. One way to elaborate on this statement is to provide additional context about the nature of the object, the magnitude and direction of the forces, and the intended outcome of this scenario.

For example, the irregularly shaped object could be a vehicle or a piece of machinery, and the four forces could be the result of external factors such as wind, gravity, or applied forces. The magnitude and direction of each force could be significant in determining the overall motion of the object, and the ultimate outcome could be to cause the object to move in a certain direction or to remain stationary despite the presence of the forces.

To learn more about forces

https://brainly.com/question/13191643

#SPJ4

Complete question:

How would you rephrase the statement "Four forces (1,2,3 and 4) are in the x-y plane and act on an irregularly shaped object"?

The law in South Africa, including the constitution, serves the interests of the dominant class, which historically has been the white minority. During apartheid, the law was used to enforce segregation and discrimination against the majority black population.

While the constitution and laws have since been revised to promote equality and protect human rights, there are still systemic issues that continue to serve the interests of the wealthy and powerful.

For example, land ownership remains highly concentrated in the hands of a few, and the legal system can be slow and expensive, making it difficult for marginalized communities to access justice. Additionally, the legacy of apartheid-era policies and practices continues to impact access to education, healthcare, and economic opportunities for many black South Africans.

Overall, while progress has been made in addressing inequality and promoting social justice, the law in South Africa still reflects the interests of the dominant class and requires continued efforts to ensure that it serves the needs of all citizens.

Know more about human rights here:

https://brainly.com/question/3444313

#SPJ11

3. If the mass is doubled, then acceleration will be halved. If both the net force and the mass are doubled, the acceleration will be unchanged.

4. If we reduce the length of the string by half then the time period will be ✓2 of the initial time period

The total internal resistance of the battery is 1.5Ω

Internal resistance is a measure of the resistance to the flow of electric current within a device or system. It is the inherent resistance of the components within the system, including the wires, battery, and any other electrical components.

Since the three cells are connected in series, the total emf of the battery is equal to the sum of the emfs of each cell. Therefore, the total emf of the battery is:

E = 3E0

where E0 is the emf of each cell.

The internal resistance of each cell is given as 0.5Ω. Therefore, the total internal resistance of the battery is:

r = 3 x 0.5Ω = 1.5Ω

Learn more about resistance on

https://brainly.com/question/30398629

#SPJ1

The weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.

The weight of the satellite is given by the formula W = mg, where m is the mass of the satellite and g is the gravitational field strength at its position.

Since the gravitational field strength at the height of the satellite’s orbit is one quarter of its value on the surface of the Earth, we have

g = (1/4) x 10 N/kg = 2.5 N/kg.

Substituting the given values, we get W = 20 kg x 2.5 N/kg = 50 N.

The weight of the satellite is the gravitational force that acts on it due to the Earth’s gravitational field. This force depends on the mass of the satellite and the gravitational field strength at its position. The gravitational field strength varies with the distance from the Earth’s center, and it decreases as the distance increases.

The weight of the satellite is less than its mass because it is in freefall around the Earth, and it experiences a centripetal force due to the gravitational attraction of the Earth. This centripetal force exactly balances the gravitational force, so the satellite remains in orbit.

In summary, the weight of a satellite of mass 20 kg in orbit around the Earth, where the gravitational field strength is one-quarter of its value on the surface of the Earth, is 50 N.

The weight of the satellite depends on its mass and the gravitational field strength at its position, and it is less than its mass because of the centripetal force that balances the gravitational force and keeps the satellite in orbit.

To know more about mass refer here:

https://brainly.com/question/18064917#

#SPJ11

Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to the displacement from the equilibrium point and is directed towards the equilibrium point.

This is known as Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.

Mathematically, this can be expressed as F = -kx, where F is the restoring force, x is the displacement from the equilibrium point, and k is the spring constant, a measure of the stiffness of the spring.

To know more about Hooke's Law refer here

https://brainly.com/question/29126957#

#SPJ11

Science and technology have had a significant influence on society, with both successes and difficulties.

The achievements can be noted as -

The challenges can be noted as -

Read more about science and technology on:

https://brainly.com/question/28497175

#SPJ1

A flywheel of mass 3. 0g consist of a flat uniform disc of radius 0. 40m. It pivots about central axis perpendicular to its plane, moment of inertia: 2.4 x 10⁻⁴ kg m².

A) To calculate the moment of inertia of a flat uniform disc, we use the formula: I = (1/2) * M * R², where I is the moment of inertia, M is the mass, and R is the radius.

Given the flywheel's mass (3.0g) and radius (0.40m), first convert the mass to kilograms: 3.0g = 0.003 kg. Then, plug the values into the formula: I = (1/2) * 0.003 kg * (0.40m)².

The moment of inertia of the flywheel is approximately 2.4 x 10⁻⁴ kg m².

B) When a torque of 6.8 Nm acts on the flywheel, it causes angular acceleration, which can be calculated using the formula: τ = I * α, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.

Rearrange the formula to find α: α = τ / I. Plugging in the values, we get: α = 6.8 Nm / (2.4 x 10⁻⁴ kg m²). The angular acceleration of the flywheel is approximately 2.83 x 10⁻⁴ rad/s². This means the flywheel will experience a significant increase in angular velocity due to the applied torque.

To know more about moment of inertia, refer here:

https://brainly.com/question/15246709#

#SPJ11

As fluids are transported over a long distance, the fluid pressure in the pipes tends to decrease. This occurs due to several factors, including friction, elevation changes, and pipe diameter variations.

1. Friction: As the fluid flows through the pipes, it encounters resistance from the pipe walls, which is known as friction. This friction causes the fluid to lose energy, resulting in a drop in pressure. The longer the distance, the more friction the fluid experiences, and the greater the pressure loss.

2. Elevation changes: When a fluid flows through pipes with elevation changes, the pressure can vary due to gravity. Fluids flowing uphill experience a decrease in pressure due to the energy required to move against gravity. Conversely, fluids flowing downhill may experience an increase in pressure as gravity aids in the movement.

3. Pipe diameter variations: If the pipe diameter changes along the path, it can also affect the fluid pressure. As the fluid moves from a larger diameter pipe to a smaller one, the flow velocity increases, resulting in a decrease in pressure according to Bernoulli's principle.

In summary, as fluids are transported over long distances, the fluid pressure in the pipes generally decreases due to factors such as friction, elevation changes, and pipe diameter variations. This happens because the fluid loses energy as it overcomes these obstacles during its flow, leading to a reduction in pressure.

To know more about fluids refer here

https://brainly.com/question/21708739#

#SPJ11