Answer:
Option A, light energy from the sun
Explanation:
In the process of photosynthesis, the energy from sun in the form of light and heat is taken to undergo glycolysis and prepare glucose/starch (chemical).
Thus, the light and heat energy of sun is converted into the chemical energy.
Option B and C are incorrect because no kinetic energy or chemical energy is taken from any source.
Option D is also incorrect because heat is taken but it is not taken from the surrounding environment. The source of heat energy is sun.
Thus, only option A is correct
*SHOW YOUR WORK*
What is the molarity of a solution made up of 15.5 mol of ammonium sulfate dissolved in enough water to make 45 liters of solution?
Taking into account the definition of molarity, the molarity of a solution made up of 15.5 mol of ammonium sulfate dissolved in enough water to make 45 liters of solution is 0.34 moles/L.
Definition of molarityThe molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species and indicates the number of moles of solute contained in one liter of solution.
The molarity of a solution is calculated by:
molarity= number of moles÷ volume
Molarity is expressed in units moles/L.
This caseIn this case, you have:
Number of moles= 15.5 molesVolume= 45 LReplacing in the definition of molarity:
molarity= 15.5 moles÷ 45 L
Solving:
molarity= 0.34 moles/L
Finally, the molarity of the solution is 0.34 moles/L.
Learn more about molarity:
brainly.com/question/9324116
brainly.com/question/10608366
brainly.com/question/7429224
#SPJ1
which of the following would not be an action-reaction pair according to newton's third law of motion? a. an oar pushes the water, and the water pushes the oar. b. a dog wags its tail, and the tail wags the dog. c. a missile pushes a gas, and the gas pushes the missile. d. a boy sits in a chair, and the floor pushes the boy.
"A boy sits in a chair and the floor pushes the boy" is not an action-reaction pair according to Newton's third law of motion.
According to Newton's third law of motion, every action which occurs in nature has an equal as well as opposite reaction. If a particular object Z happens to exert a force on another object Y then the object Y will also exert an equal as well as opposite force on object Z.
For example, when an oar pushes the water, the water also pushes the oar; when a dog wags its tail, the tail also wags the dog and when a missile pushes gas out, the gas also pushes the missile forward. All these instances involve an action-reaction pair.
Hence, option d. "a boy sits in a chair, and the floor pushes the boy" is the correct option.
To know more about Newton's third law of motion here
https://brainly.com/question/29768600
#SPJ4
1. What is 16.2 kPa in atmospheres?
According to the question,16.2 kPa is equal to 0.16 atmospheres.
What is the atmospheres?
The atmosphere is the thin layer of gases and particles that surrounds Earth, protecting us from the sun’s harmful radiation and maintaining the planet’s temperature. It is composed of 78% nitrogen, 21% oxygen, 0.9% argon, 0.03% carbon dioxide, and trace amounts of other gases, as well as water vapour, dust, and other particles. The atmosphere works by trapping heat from the sun, allowing temperatures to remain relatively stable throughout the world. It also helps regulate the water cycle, ensuring that water remains available for life on Earth. The atmosphere also helps protect us from environmental hazards like ozone depletion and acid rain. In addition, it is home to many species of birds, insects, and other animals. Without the atmosphere, Earth would be a barren, lifeless planet.
To learn more about atmospheres visit:
https://brainly.com/question/28310375
#SPJ1
You are given the balanced chemical equation below. If you start this chemical reaction with 0.53 moles of CH4 and 1.5 moles of O2, how many grams of CO2 is formed?CH4 + 2O2 => CO2.+ 2H2O32.9 g b 23.3 g c 19.5 g d 8.5 g e 39.3 g f none of these
Answer:
b. 23.3g
Explanation:
Based on the reaction:
CH₄ + 2O₂ → CO₂ + 2H₂O
To find the mass of CO2 produced we must find, as first, the limiting reactant. With limiting reactant we can find the moles and the mass of CO2 as follows:
Limiting reactant:
For a complete reaction of 0.53 moles of CH4 are necessaries:
0.53 moles CH4 * (2mol O2 / 1mol CH4) = 1.06 moles O2.
As there are 1.5 moles, CH4 is limiting reactant.
Moles CO2:
1 mole of CH4 produce 1 mole of CO2. That means the moles of CO2 formed are 0.53 moles.
Mass CO2 (Molar mass: 44.01g/mol)
0.53 moles CO2 * (44.01g / mol) =
b. 23.3g
2CuO(s)+NO(g)→Cu2O(s)+NO2(g)
Express your answer using three significant figures.
ΔHrxn∘ =
ΔHrxn∘ = -144 kj / mol is the Standard Enthalpy of the reaction. It is the sum of the individual enthalpies of the reactants subtracted from the sum of enthalpies of the products.
2CuO(s)+NO(g) → Cu2O(s)+NO2(g)
[tex]Cu_{2}O[/tex] → 2[tex]Cu[/tex] + 1/2 [tex]O_{2}[/tex] eqn 1
ΔH1 = [tex]Cu_{2}O[/tex] - 2 Cu - 1/2 [tex]O_{2}[/tex]
ΔH1 = -168.6 kj / mol
2[tex]NO[/tex] + [tex]O_{2}[/tex] → [tex]2NO_{2}[/tex] eqn 2
ΔH2 = 2 [tex]NO[/tex] + [tex]O_{2}[/tex] - [tex]2NO_{2}[/tex]
ΔH2 = -114.1 kj / mol
[tex]CuO[/tex] → [tex]Cu[/tex] + [tex]1/2 O_{2}[/tex] eqn 3
ΔH3 = Cuo - Cu - [tex]1/2 O_{2}[/tex]
ΔH3= 157.3 kj / mol
1/2 eqn 2 + 2 eqn 3 - eqn 1
Δ H= -57.05 + 78.65 -168.6
ΔH= -144 kj / mol
To learn more about Enthalpy
https://brainly.com/question/13996238
#SPJ4
A student heated 30 milliliters of water from 0 degrees celcius to 70 degrees celcius. How much energy did she use to heat the water?
The amount of energy used to heat the water from 0°C to 70°C is 8,786.4J.
How to calculate energy?The amount of energy used in heating a substance can be calculated using the following formula:
Q = mc∆T
Where;
Q = amount of heat absorbed or releasedm = mass of substance in gramsc = specific heat of water at 4.184 J/g°C∆T = change in temperatureAccording to this question, a student heated 30 milliliters of water from 0 degrees celsius to 70 degrees celsius.
Since 1mL of pure water equals 1 gram, then 30mL of water will equal 30grams of water.
Q = 30 × 4.184 × (70 - 0)
Q = 8,786.4J
Therefore, 8,786.4J is the energy used to heat the water sample.
Learn more about energy at: https://brainly.com/question/8168263
#SPJ1
Where is hydroelectric energy used?
Hydroelectric energy is a renewable form of energy used to generate electricity.
This energy is created by harnessing the power of moving water, typically from rivers and streams, to spin turbines and generate electricity.
Hydroelectric power plants are used to generate electricity for homes, businesses, and cities all over the world.
By utilizing the natural power of water, hydroelectric energy is a clean, safe, and reliable source of energy that helps reduce global carbon emissions. It is also a cost-effective energy source, making it a popular choice for many energy providers.
Hydroelectric energy is one of the most widely used sources of electricity in the world, with many countries heavily relying on it for their energy needs.
To learn more about hydroelectric, click here:
https://brainly.com/question/2321474
#SPJ4
Between what is expected and what actually happens?
Irony is a mismatch between what is expected and what actually occurs. These literary methods aid in the creation of dramatic effects in writing.
What is Irony?Irony is a disconnect between what is expected to happen and what actually happens. These types of literary devices help in creating a dramatic effect in literature.
Irony is a literary device which was used extensively in Greek tragedy. It involves expressing the meaning of something by making use of words which technically mean the opposite of the original thing being conveyed.
Irony is used for a dramatic or humorous effect. There are three types of irony seen in literature as follows:
• Verbal Irony
• Situational Irony
• Dramatic Irony
Verbal irony involves the usage of different words to mean something dissimilar to what they look like they actually mean.
Situational Irony means that what happens is totally different from what was expected to be happening.
Dramatic Irony occurs in plays, etc. where the audience or the readers are more aware of what is actually going on as compared to the character in the scene.
Learn more about irony here:
https://brainly.com/question/13428382
#SPJ4
How is water an exmaple of an molecule and a compound
Answer:
Water is a compound because it is made up of water molecules. There is no such thing as water atoms. Water molecules are made of hydrogen and oxygen atoms, in the definite proportion of two hydrogens for one oxygen.
Explanation:
The difference between a molecule and a compound is this:
A molecule consists of two or more atoms joined by a chemical bond.
A compound consists of two or more different atoms joined by chemical bonds.
Water (H2O) is both a molecule and a compound.
Hydrogen gas (H2) and oxygen gas (O2) are molecules but because the atoms of which they are made are not different, they do not qualify as compounds.
How do you find the number of grams in 1.204 moles of [tex]NH3[/tex]?
Answer:
[tex]\boxed {\boxed {\sf 20.51 \ g \ NH_3}}[/tex]
Explanation:
If we want to convert from moles to grams, we must use the molar mass. This values tells us the mass of 1 mole of a substance. They can be found on the Periodic Table; they are equivalent to the atomic masses, but the units are grams per mole (g/mol) instead of atomic mass units (amu).
1. Molar MassWe have the compound ammonia or NH₃. Look up the molar masses for the individual elements.
Nitrogen (N): 14.007 g/mol Hydrogen (H): 1.008 g/molCheck for subscripts. There is a subscript of 3 after hydrogen. This means there are 3 atoms of hydrogen in 1 molecule of ammonia. We should multiply hydrogen's molar mass by 3.
H₃= 1.008 * 3=3.024 g/molAdd nitrogen's molar mass.
NH₃: 14.007 + 3.024=17.031 g/mol2. Convert Moles to GramsNow, use the molar mass as a ratio.
[tex]\frac {17.031 \ g \ NH_3}{1 \ mol \ NH_3}[/tex]
Since we are trying to find the mass of 1.204 moles, we multiply by that value.
[tex]1.204 \ mol \ NH_3 *\frac {17.031 \ g \ NH_3}{1 \ mol \ NH_3}[/tex]
The units of "moles of ammonia" cancel.
[tex]1.204 *\frac {17.031 \ g \ NH_3}{1}[/tex]
The denominator of 1 can be ignored.
[tex]1.204 * 17.031 \ g \ NH_3[/tex]
[tex]20.505324 \ g \ NH_3[/tex]
3. RoundThe original measurement of moles has 4 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place.
20.505324The 5 in the thousandth place tells us to round to 0 to a 1 in the hundredth place.
[tex]20.51 \ g \ NH_3[/tex]
1.204 moles of ammonia is equal to 20.51 grams of ammonia.
In the basketball experiment, what does
the different materials represent?
Control variable?
dependent variable?
independent variable?
Express the answers to the following operations with the proper number of significant figures.
4. 108 x 5. 3
____ X 10^
The answer to the given operations with proper number of significant figures is 5.7 × 10².
Significant figures or numbers can be defined as those particular numbers or digits which are essential in determining the accuracy of a particular value. For example, 4.392 has 4 significant figures.
When we are rounding off a number to write it with the proper number of significant figures, we first need to decide the amount of significant figures that it should have.
On calculating the given operation,
⇒ 108 × 5.3 = 572.4
In significant figures,
= 5.72 × 10²
To learn more about significant figures here
https://brainly.com/question/29153641
#SPJ4
On which of the following factors does the amount of energy absorbed by an endothermic reaction depend?
O Number of reactants
O Physical state of the reactant
O Sum of the potential energy of the reactants and products
O Difference in the potential energy of the reactants and products
Answer: D!! ( difference in the potential energy of the reactants and products )
Explanation:
i have the same test
what is the volume of 35.2g of copper when copper is 8.80 g/cm3 and the density is at 20°C?
The volume of the copper is equal to 4cm³.
What is the density?The density of the substance can be described as the substance's mass per unit of its volume. The symbol commonly used to express density is ρ and the D letter can also be used.
The mathematical formula of the density can be expressed as written below:
Density = Mass/Volume or ρ = m/V
The density of a material varies with temperature and pressure. There is a small variation for solids as well as liquids but much larger for gases. Increasing the pressure of material decreases the volume of material and thus increases its density.
Given the mass of the copper = 35.2 g
The density of the copper at 20°C, d = 8.80 g/cm³
The volume of the copper, V = mass/density = 35.2/8.80 = 4 cm³
Learn more about density, here:
brainly.com/question/15164682
#SPJ1
The pressure acting here is 3.32 atm. Then the volume of copper can be determined using ideal gas law. The volume is 3.9 L.
What is ideal gas equation ?Ideal gas equation is a combination of Boyle's law, Charle's law and Avogadro's law. The expression relating pressure, volume, temperature and number of moles of a gas is written as:
PV = nRT.
It can be rearranged as PM = dRT.
where d is the density and M be the mass.
Atomic mass of copper = 63.5 g/mol
density = 8.80 g/cm³
T = 20° C or 293 K.
Then pressure p = dRT/M
p = 8.80 g/cm³ × 0.082× 293 /63.5 = 3.32 atm
Now the weight of copper = 35.2 g
number of moles of Cu = 35.2/63.5 = 0.5 g.
Then, v = nRT/P
v = 0.5 × 0.082 × 293 /3.32 = 3.9 cm³.
Therefore, the volume of copper is 3.9 L.
Find more on ideal gas equation:
https://brainly.com/question/17254541
#SPJ1
Which of these statements is true about the two graphed parallelograms?
Answer:
They are similar, because one can be obtained by dilating the other about the origin with a scale factor of 1/2.
Explanation:
The dilation of a shape is similar to the original shape; this is because the corresponding side lengths are proportional.A scale factor is how many times larger or smaller the image will be relative to the preimage. In other words, multiply the x and y-coordinates by the scale factor to get the coordinate points of the image.The image is dilated by 1/2.
Take a look.
The coordinate labels of the preimage include: A, B, C, and D.
The coordinate labels of the image include: A', B', C', and D'.
Coordinates of point A: (2, 8)
Coordinates of point A': (1, 4)
**The preimage's x and y-coordinates multiplied by 1/2 will give you the x and y-coordinates of the image.**
What is the half-life of a 12 g sample of radioisotope that decayed to 6 g in 28
years?
A. 28 years
B. 14 years
C. 56 years
D. 7 years
Answer:
A. 28 years
Explanation:
Applying,
R = R'(2ᵃ/ⁿ).............. Equation 1
Where R = Original sample, R' = Sample left after decay, a = Total time taken to decay, n = half life.
From the question,
Given: R = 12 g, R' = 6 g, a = 28 years.
Substitute into equation 1 and solve for n
12 = 6(2²⁸/ⁿ)
12/6 = 2²⁸/ⁿ
2²⁸/ⁿ = 2
Equation the base,
28/n = 1
n = 28 years.
Hence the half-life is 28 years
How much energy is required to raise the temperature of 3 kg of lead from 15°C to 20°C? Use the table below and this equation: Q = MCAT.
The question is written right above the table given.
Answer:
1935J
Explanation:
Answer:
[tex]\boxed {\boxed {\sf C. \ 1935 \ J}}[/tex]
Explanation:
The equation for this problem is:
[tex]q=mc\Delta T[/tex]
where m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
The mass is 3 kilograms, but the specific heat capacity includes grams in the units. Convert kilograms to grams. There are 1000 grams in 1 kilogram.
[tex]\frac {1000 \ g}{1 \ kg}[/tex][tex]3 \ kg *\frac {1000 \ g}{1 \ kg}[/tex][tex]3 *1000 \ g = 3000 \ g[/tex]The specific heat capacity for lead is found on the table. It is 0.129 J/g°C.
Let's find the change in temperature. It is raised from 15 °C to 20 °C.
[tex]\Delta T= final \ temperature - initial \ temperature \\\Delta T= 20 \textdegree C - 15 \textdegree C\\\Delta T= 5 \textdegree C[/tex]Now we know every value.
m= 3000 g c= 0.129 J/g°CΔT= 5 °CSubstitute the values into the formula.
[tex]q= (3000 \ g)( 0.129 \ J/g \textdegree C)(5 \textdegree C)[/tex]
Multiply the first 2 numbers together. The units of grams cancel.
[tex]q= (387 \ J/ \textdegree C )(5 \textdegree C)[/tex]
Multiply again. This time the units of degrees Celsius cancel.
[tex]q= 1935 \ J[/tex]
1935 Joules of energy are required and choice C is correct.
What is the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia
4-methyl-2-pentene s the expected major organic product from treatment of 4-methyl-2-pentyne with sodium metal in liquid ammonia.
The process includes hydrogenation of an alkyne to an alkene in liquid ammonia using sodium metal. This is a particular reaction that leads in the creation of trans alkene. Alkynes are hydrocarbons with triple carbon-carbon bonds. For molecules with a single triple bond, their typical formula is CnH2n-2 (and no rings).
A number of the same reactions occur in alkynes as in alkenes, but they can react twice due to the existence of two p-bonds inside the triple bond. When sodium dissolves into liquid ammonia (boiling point -33 °C), it turns a vivid blue. When there are alkynes present, they have reduced to a trans (i.e. E) alkene.
To know more about the Ammonia, here
https://brainly.com/question/28393162
#SPJ4
At what point in time (A ,B or C) is the reaction the fastest? How do you know?
A
B
С
Base your answer on the information below. in liquid water, an equilibrium exists between h2o() molecules, h+(aq) ions, and oh–(aq) ions. a person experiencing acid indigestion after drinking tomato juice can ingest milk of magnesia to reduce the acidity of the stomach contents. tomato juice has a ph value of 4. milk of magnesia, a mixture of magnesium hydroxide and water, has a ph value of 10. identify the negative ion found in milk of magnesia.
Answer:
OH^-
Explanation:
Any substance that is able to neutralize acidity in the stomach is generally known as an antacid. There are various kinds of antacids that are in common use. It should be noted that the stomach is usually slightly acidic.
Milk of magnesia is the substance magnesium hydroxide with chemical formula Mg(OH)2. A solution of milk of magnesia contains Mg^2+ and OH^-.
Hence the negative ion contained in milk of magnesia is the hydroxide ion OH^-.
What effect will dissolving larger amounts of sugar in a beaker of water have on the concentration and conductivity of the solution
Both concentration and conductivity increase when larger amounts of sugar in a beaker of water dissolves.
The volume of the resulting solution will be larger than one quart if you dissolve a cup of sugar in a quart of water. In comparison to distilled water, the concentration of solutes inside the cell is higher. Most of the time, a particular amount of solvent can only dissolve a specific maximum amount of solute. This maximum amount is specified as the solubility of the solute. Only solutions with charge carriers will be able to conduct electricity. Simply having polar molecules in the solution is insufficient. It must be able to transfer electrons between points with the least amount of interference.
To learn more about concentration click here https://brainly.com/question/10725862
#SPJ4
What is the limiting reaction in Zn + HCl?
Answer:
3. The limiting reactant is the reactant that gives you the smaller amount of product. Therefore HCI is the limiting reactant in this problem. In this reaction 9.4 grams of ZnCl2 will form and there will be leftover zinc that did not react.
Plz answer fasttt
There are several ways to model a compound. One type of model is shown.
4 C's are connected in a line by 3 black lines. The C on the left has 3 H's attached to it each by a black line. The next C has 1 H attached by a black line and 1 O attached by 2 black lines. The next C has 2 H's attached to it by 1 black line each. The last C has 2 H's attached to it by 1 black line each and 1 O attached by a single black line. That O has an H attached to it by 1 black line.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
I believe the answer would be C4H9O2.
The decrease in entropy (the DS value is negative) observed for alkene addition reactions results from:
Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.
The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.
To learn more about carbocation please click on below link
https://brainly.com/question/13164680
#SPJ4
how to balanced this one
_KClO4 + _KCl ➡️ _KClO3
& this one too. Ill give brainliest
_AlI3 + _HgCl2 ➡️ AlCl3 + _HgI2
Answer:
3KClO4 + KCl ➡️ 4KClO3
2AlI3 + 3HgCl2 ➡️ 2AlCl3 + 3HgI2
When 200 grams of water cools from 50.0C to 250C, the total amount of heat energy released by the water is
When 200 grams of water cools from 50.0°C to 250°C, the total amount of heat energy released by the water is The total amount of energy released is 20, 930 J.
We will apply the formula. q = mCt, where q is the amount of heat energy released. m= mass. C is the specific heat of the water. T= temperature change. Because the specific heat of the water has not been specified, we will use the standard value of 4.186J/g °C. q = mCΔT. q = 200 × 4.186 × (50 -25) (50 -25) q = 200 × 4.186 × 25 q = 5000 × 4.186 q = 20, 930 The total amount of energy released is 20, 930 J.
In physics, energy (from Ancient Greek: v, enérgeia, "activity") is a quantitative property that is transferred to a body or a physical system and is visible in the performance of work as well as in the form of heat and light. Energy is a conserved quantity, which means that it can be converted in form but not created or destroyed. The joule is the SI unit of energy measurement (J).
The kinetic energy of a moving object, the potential energy stored by an object (for example, due to its position in a field), the elastic energy stored in a solid object, and the chemical energy associated with chemical reactions are all common types of energy.
Learn more about energy here:
https://brainly.com/question/4543824
#SPJ4
Help would be greatly appreciated
How many moles of Zn(NO3)2 form from 7.0 mol AgNO3?
The correct answer is 7.0 moles of AgNO3 will form 7.0 moles of Zn(NO3)2,
What is mole ratio?Mole ratio is the ratio between the number of moles of two substances that are involved in a chemical reaction. It is an important concept in stoichiometry, which is the study of the relationship between the amounts of reactants and products in a chemical reaction. Mole ratio is often expressed as a fraction, in which the numerator is the number of moles of one substance, and the denominator is the number of moles of the other substance.
Since the reaction is a 1:1 mole ratio of reactant to product:
AgNO3 → Zn(NO3)2
7.0 mol AgNO3 → 7.0 mol Zn(NO3)2
To learn more about mole ratio
https://brainly.com/question/19099163
#SPJ1
The following data was collected when a reaction was performed experimentally in the laboratory.
Reaction Data:
Reactants:
Fe2O3 (3 moles)
Al (5 moles)
Products:
Al2O3 (?)
Fe (?)
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
Please be thorough. I am in agony at this question and I need the most help I can get. Thanks
According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.
Determination of the maximum amount of Fe that was produced during the experiment.Balanced equation of the reactionFe2O3 + 2Al → 2Fe + Al2O3
Limit reagent determinationIf 1 mole of Fe2O3 is combined with 2 moles of Al
So 3 moles of Fe2O3 combine with x moles of Al
X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles
Limiting reagent: Al, because there are only 5 moles available
Determination of the amount of iron producedIf 2 moles of Al produce 2 moles of Fe
So 5 moles of Al produce x moles of Fe
X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles
Determination of the amount of aluminum oxide producedIf 2 moles of Al produce 1 mole of Fe2O3
So 5 moles of Al produce x moles of Fe2O3
X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles
Explanation about the procedures used to determine the amount of ironBy establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.
Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434
#SPJ4
In the last minute rush to assemble the demonstration, your teacher spills the lead chloride all over their sandwich and is left with 57.2 grams in the bottle. How much potassium iodide should be weighed out to convert all of the lead chloride to product?
what are the moon phases. but be more detailed and don't put in "the phases of the moon" be more detailed.
Explanation:
The lunar phase or Moon phase is the shape of the Moon's directly sunlit portion as viewed from Earth. The lunar phases gradually change over a synodic month as the Moon's orbital positions around Earth and Earth around the Sun shift.