At kelvin temperature T, cylinder A includes n molecule of a gas, and the force exerted by the gas on the cylinder is NkBT/l.
Force is what?When two bodies interact, it refers to any form of pushing or pulling that one body exerts on the other. A vector quantity, that is. For instance, a person pushes or pulls on something to provide force, such as opening a door.
What variety of forces exist?Contact forces that act at a remove forces are the two different types of forces. Your daily use of force is evident. Basically, pressure and pull are forces.
Briefing:Formulas,
-P = F/A
-n = n/Na
-PV = nRT
= NKT (R = KNa)
- Volume of cylinder: A* l
F=PA
P = NKbT / V
P = NKbT / A* l
F = NkBT / A * l (A)
Cross out A,
Final, F = NkBT/l.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ1
How far up a wall will a 25 ft ladder reach if the base of the ladder is 7 feet from the wall?
The height formed by this 25-foot ladder that leans against a wall is 24 feet.
To find out how far up a wall a ladder will reach, you can use the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, the ladder forms one side of the triangle, the wall forms another side, and the distance between the base of the ladder and the wall forms the hypotenuse.
Let's call the height of the wall h. Using the Pythagorean theorem, we can set up the following equation:
(25 ft)^2 = h^2 + (7 ft)^2
625 = h^2 + 49
576 = h^2
h = sqrt(576) = 24 ft
Therefore, a 25 ft ladder that is 7 feet from the wall will reach 24 feet up the wall.
Learn more about determining the height of a ladder based on its length and the distance of its base from a wall here: https://brainly.com/question/13734303
#SPJ4
Explain what effect greenhouse gasses have on climate. How do they have this effect?
Answer:
Greenhouse gases have far-ranging environmental and health effects. They cause climate change by trapping heat, and they also contribute to respiratory disease from smog and air pollution. Extreme weather, food supply disruptions, and increased wildfires are other effects of climate change caused by greenhouse gases.
Explanation:
:) YW
Answer:
according to scientists greenhouse gasses, include co2 which can heat up the climate. cars and factorys creat co2 admission which cause global warming
Calculate the wavelength, in meters, of electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element.
The wavelength of the electromagnetic radiation needed to remove an electron from the valence shell of an atom of the element is 2.7522m.
The electromagnetic (EM) field's waves, which travel across space carrying momentum and electromagnetic radiant energy, make up electromagnetic radiation (EMR). It consists of X-rays, gamma rays, microwaves, infrared, visible light, ultraviolet, and radio waves. These waves are all components of the electromagnetic spectrum.
We are given that,
Speed of light = c = 299 792 458 m
The frequency of electron = f = 1.09 × 10⁸ s⁻¹
The following equation can be used to determine the wavelength of a radio wave
Wavelength = λ = c/f
λ = c/f
λ = 299 792 458 m/s/ 1.09 × 10⁸ s⁻¹
λ = 2.7522m
Therefore the wavelength of the electromagnetic radiation would be 2.7522m.
To know more about wavelength
https://brainly.com/question/1263539
#SPJ4
Justin throws a 10. 0-g ball straight
down from a height of 2. 0 m. The ball
strikes the floor at a speed of 7. 5m/s.
What was the initial speed of the ball?
The ball's initial speed as it descended straight down from a height was 17.5 miles per hour.
The starting velocity is the speed at time t = 0. (u). It is the speed at which motion first becomes apparent. Four equations can be used to calculate initial velocity: (1) If time, acceleration, and end velocity are known, the initial velocity can be calculated using the formula u = v - at.
Calculation:We can simply use the following equation of motion to solve this:v² - u² = 2 × a × s
here, v = final velocity = 7.5 m/s
a = 9.81 m/s^2
s = 2.0 m
Solving for u (initial velocity) we get:
(7.5)² - u² = 2 × 9.8 × 2
56.25 - u² = 39.2
u² = 56.25 - 39.2
u² = 17.05
To know more about velocity visit:-
https://brainly.com/question/18084516
#SPJ4
Stephen has to drive 8 miles south and 3 miles east to get to work.What is his distance and displacement?
Since the displacement is a vector quantity, the distance is 11 miles while displacement is 8.5 miles
What is Displacement ?Displacement is a distance travelled in a specific direction. Distance is a scalar quantity while displacement is a vector quantity.
Given that Stephen has to drive 8 miles south and 3 miles east to get to work.
His distance will be 8 miles + 3 miles = 11 miles
While his displacement can be calculated by using Pythagoras theorem. That is,
Displacement D = √(8² + 3²)
D = √(64 + 9)
D = √73
D = 8.5 miles
Therefore, his distance is 11 miles and his displacement is 8.5 miles.
Learn more about Displacement here: https://brainly.com/question/2109763
#SPJ1
A person weighing 500 N and a girl weighing 350 N are sitting on a board. The 50N- board is uniform and is supported at the center. The 500-N person is 1.5 m from the center, how far from the center should the girl sit so that the board is in equilibrium
The girl should sit 2.14 m from the center to keep the board in equilibrium.
What is equilibrium?
Equilibrium is a state in which the net force and net torque acting on an object are both equal to zero. This means that the object is either at rest or moving at a constant velocity. In other words, the object is not accelerating or rotating.
In order for the board to be in equilibrium, the sum of the forces acting on it must be equal to zero. Since the board is uniform and supported at the center, the only forces acting on it are the weights of the person and the girl.
To find the distance from the center that the girl should sit, we can set up the following equation:
F_net = 0 = (500 N)(1.5 m) - (350 N)(x)
where F_net is the net force acting on the board, x is the distance from the center where the girl is sitting, and the 1.5 m is the distance from the center where the person is sitting.
Solving this equation for x:
x = (500 N)(1.5 m) / 350 N = 2.14 m
Hence, the girl should sit 2.14 m from the center to keep the board in equilibrium.
To learn more about equilibrium from the given link:
https://brainly.com/question/1041717
#SPJ4
(ii) a large electroscope is made with "leaves" that are 78-cm-long wires with tiny 21-g spheres at the ends. When charged, nearly all the charge resides on the spheres. If the wires each make a 26° angle with the vertical (fig. 16–55), what total charge q must have been applied to the electroscope?
The electroscope must have received a total charge of 2.45 x q if the wires are each at a 26° angle with the vertical.
The electroscope is what?An electroscope is a scientific tool which is used to find the existence of an electric charge on a body. The first electroscope with a pivoting needle, known as a versorium, was created by British physician William Gilbert in the year 1600.
What are the many varieties of electroscope?An electroscope is a piece of equipment used in science to determine whether and how much electric charge is present on a body. There are three traditional electroscope types: the needle electroscope, the gold-leaf electroscope, and the pith-ball electroscope (third). For each of them, we have simulators available.
Briefing:Equilibrium condition = mgsin∅ = 2.45 x [tex]10^{-6}[/tex]
To learn more about electroscope visit:
brainly.com/question/29073064
#SPJ4
उत्तोलक हुन् ?
Calculate the load arm and effort arm from the following figure if the lever is in
balanced condition. In which class of lever do spoon and scissor belong to.(Ans: 3m, 15 m)2+1
Answer:
The length of the load arm is 3 m
The length of the effort arm is 15 m
Spoons and scissors are class 1 levers
Explanation:
The data given in the force diagram of the lever (machine) are;
The length of the lever = 18 m = (Length of effort arm) + (Length of load arm)
The force applied at the effort = 100 N
The load lifted by the lever = 500 N
The mechanical advantage, MA is given as follows;
MA = Load/Effort = (Length of effort arm)/(Length of load arm)
∴ MA = 500 N/(100 N) = 5
Let 'x' represent the length of the effort arm, and let 'y', represent the length of the load arm, we have;
x + y = 18...(1) (given)
MA = 5 = x/y
∴ x = 5·y...(2)
Substituting the value of 'x' in equation (1) with x = 5·y gives;
x + y = 5·y + y = 6·y = 18
∴ y = 18/6 = 3
y = 3
The length of the load arm, y = 3 m
x = 5·y = 5 × 3 = 15
x = 15
The length of the effort arm, x = 15 m
When lifting food with a spoon, the fulcrum, which can be taken as the edge of the plate or the supporting finger, is in between bowl of the spoon and the point of application of the thumb towards the extremities of the spoon handle
Therefore a spoon is a class 1 lever
The pivot of a scissors is in between the item being cut (the load) and the holes where the finger applies an effort
Therefore, a scissors is a class 1 lever.
How does dynamic stretching help an individual prepare for an activity brainly?
Dynamic stretching helps to prepare the body for an activity by increasing:
body temperatureimproving range of motionactivating the muscles and nervous system for the activity. also helps to reduce the risk of injury by improving the body's ability to move through a full range of motion.improving coordination and balance.What is dynamic stretching?Dynamic stretching is a form of stretching that involves active, controlled movements such as swinging, bouncing, and twisting. The goal of dynamic stretching is to improve range of motion and flexibility while preparing the body for physical activity.
Learn more about dynamic stretching:
https://brainly.com/question/24842019
#SPJ4
__________________________ are made of rock or metal, which often collide with Earth
Answer:
Planets are bodies of rock or gas that are named after ancient gods.
Asteroids and Meteoroids are made of rock or metal, which often collide with Earth.
The terrestrial planets are more like the Earth.
The Juno spacecraft is exploring the planet Jupiter.
Explanation:
The planets and other stars in our solar system were similarly baptized. The planets were named after ancient gods. Other stars were baptized with names chosen by scientists or according to their peculiarity. Most of the planets were baptized by ancient Chinese astronomers, and later, by Babylonians. But over time different civilizations changed the names of the planets.
An asteroid is a smaller body in the solar system, usually on the order of just a few hundred kilometers. Meteoroids, in turn, are fragments of rocks that form from comets and asteroids. The luminous effect is produced when fragments of celestial bodies ignite in contact with the Earth's atmosphere due to friction. Both asteroids and meteoroids are made of rock or metal, which often collide with Earth.
The terrestrial planets are the most similar to the earth. These planets are those formed mainly by rocks and metals, have a solid surface without the incidence of rings, as is the case with Mercury, Venus and Mars.
The Juno spacecraft is exploring the planet Jupiter. This probe has already given us several unprecedented discoveries about the largest gas giant in the Solar System, in addition to sending us sensational images showing the complex and beautiful atmosphere of the planet.
which is an example of interdependence between species?
A. Sea turtles lay their eggs in the sand
B. Animals eat seeds, then those seeds are spread by animals
C. Trees make carbohydrates from solar energy
D. Polar bears eat seals on ice floes
Animals eat seeds, then those seeds are spread by animals.
In interdependence if the population of an organism rises and falls, then they can affect the rest of the ecosystem.Here plants are dependent on animals for depression of seeds and animals are dependent on plants for foodWhat is interdependence?Interdependence means dependence of living beings on each other for their survival.All organisms from tiny microbes to huge predators, depend upon each other to obtain energy and other basic resources.To know more on interdependence here
https://brainly.com/question/3095398
#SPJ2
What is the wave speed of a wave traveling with a frequency of 37 Hz and 2 points
a wavelength of 6 m? (Remember your units!)
Answer:
222m/s
Explanation:
The speed of a wave is calculated using the forumula:
v = fλ
Lets substitute in our values:
v = 37 × 6
Which is equal to
v = 222m/s
What are the similarities and differences between static stretching and dynamic stretching?
The similarities and differences between static stretching and dynamic stretching are the dynamic stretch is a style of stretching that is more strenuous and physically stimulating, while the static stretch is a form of stretching that is slower and more relaxing.
Another difference between static and dynamic stretching is that after a dynamic stretch, you may feel stronger and have more muscle endurance and speed, whereas static stretching before an exercise diminishes these same qualities; To get the most out of your workout, perform dynamic stretching before you begin, and static stretching afterward. Static and dynamic stretching have similar benefits in lowering the risk of injury by increasing flexibility, balance, and body awareness.
To learn more about dynamic and statistic stretch click here:
https://brainly.com/question/14635799
#SPJ4
A car drives to the right. There is a large amount of air resistance, and the car's engine provides the car's forward motion. Which force on the free-body diagram below represents the normal force acting on the car?
A force on the free-body diagram above which represents the normal force acting on the car include the following: D. Force A.
What is a free-body diagram?In Science, a free-body diagram can be defined as a graphical illustration which is typically used in the field of science to visualize moments, tension, and applied forces that are acting on an isolated or rigid object (body), while using arrows to point in the direction of these forces.
Since this car was driven to the right, with a large amount of air resistance acting on it, and its engine provides the forward motion, we can reasonably infer and logically deduce that the normal force which is acting on the car is represented by Force A as illustrated by the free-body diagram shown in the image attached above.
Read more on free-body diagram here: https://brainly.com/question/18770265
#SPJ1
Two unequal masses are dropped simultaneously from the same height. The two masses will experience the same change in
(A) acceleration
(B) kinetic energy
(C) potential energy
(D) velocity
When two unequal masses are dropped simultaneously from the same height, then both masses will experience the same change in D: velocity.
Velocity is the prime indicator of the position and the rapidity of the object. It can be described as the distance covered by an object in a unit of time. It means that velocity is the displacement of the object in unit time. When in the case where two objects with unequal masses are dropped simultaneously from the same height, both masses will attain the same change in velocity.
You can learn more about Velocity at
https://brainly.com/question/25749514
#SPJ4
An object falling from 50m will have
potential than an object falling from 30m
:Equal
:Lower
:Greater
:Less
Answer:
Greater
Explanation:
Distance (height) and mass determine the amount of Potential energy in an object.
How would increasing the pressure of this reaction affect the equilibrium? 3H2 + N2 + 2NH3
Answer: (C) H2 and N2 would react to produce more Nh3
Explanation:
A p e x
600 Joules of work is used to lift a box from the ground to a height of six meters. How much work would have been done if a lever
would have been used with an effort arm of 12 meters and a load arm of 6 meters? (1 point)
O 100 J
0 72 J
O 50 J
O 600 J
Accounting for things like how many team members should be assigned to a task, how many resources are required, how many hours tasks will take and more.
Why is it necessary for the effort arm to be longer than the load arm?When the effort arm is longer than the load arm, there is a significant mechanical advantage.The lever is made up of two “arms”: The load arm (also known as the output arm) is the portion of the lever that is directly attached to the load. The effort arm (or applied force arm) is the section of the lever to which the effort, or input force, is applied.
A= W P = 1 , Where W represents the load and P represents the effort. So, if we utilize one fixed pulley to raise the weight, the effort required will be 50 k g w t in one direction.
To learn more about Effort to refer:
https://brainly.com/question/2141317
#SPJ1
New ecosystems have been created by human land use.
Answer:
Yes
Explanation:
When humans use land, they change it to accommodate their own needs, and thus new locations and new habitats for other organisms are created. These organisms can now live there and create new organisms, and thus create new ecosystems as a result of human use of that particular piece of land.
Which of the following is an example of mechanical waves?
Microwaves
Sound waves
Light waves
Radio waves
A soccer ball is moving with a momentum of 5 kg m/s when a soccer player
kicks the ball back in the opposite direction. After the kick, the soccer ball
is moving with a momentum of 7 kg m/s. What is the impulse the soccer
player applied to the soccer ball?
The impulse applied to the soccer ball by the soccer player is the combined force and time of the kick applied to the ball.
What do you mean by Impulse?
Impulse is an instantaneous force applied to an object, resulting in a change in the object's momentum. It is a vector quantity, which means that it has both magnitude and direction. Impulse is the product of a force applied to an object for a certain period of time. It is calculated as the product of the average force applied multiplied by the time period over which the force is applied. For example, when a ball is hit with a bat, the force of the bat is applied to the ball for a certain amount of time, resulting in an impulse which causes the ball to move.
1. Calculate the change in momentum of the soccer ball:
Change in momentum = Final Momentum - Initial Momentum
= 7 kg m/s - 5 kg m/s
= 2 kg m/s
2. Calculate the impulse:
Impulse = Change in Momentum
= 2 kg m/s
Therefore, the impulse applied by the soccer player to the soccer ball is 2 kg m/s.
To know more about impulse,
https://brainly.com/question/29787329
#SPJ4
Every year, new records in track and field events are recorded. Let's take a historic look back at some exciting races. On August 20, 1989, in Cologne, West Germany, Said Aouita of Morocco also established a world record when he ran the 3000. m run in 7 minutes, 29.45 seconds. What was his average speed (in m/s) for the race
Said Aouita's average speed for the race was 12.089 m/s. To calculate this, we need to divide the total distance (3000 meters) by the total time (7 minutes and 29.45 seconds).
Converting the time to seconds, we get 449.45 seconds.
Therefore,
3000 / 449.45 = 12.089 m/s.
This is an impressive speed for a 3000 m race and it was a new world record at the time. Aouita was the first runner to break the eight minute barrier in the 3000 m, a feat he accomplished in 1987. His world record lasted for almost 3 years until it was broken by Moses Kiptanui in 1992. Aouita's world record is a testament to his incredible speed and endurance.
Learn more about speed:
https://brainly.com/question/26046491
#SPJ4
A man is standing on the shore of a beach, up to his knees in water. Every second two waves hit him. What is the frequency of the wave?
Answer:
f = 2 Hz
Explanation:
The frequency of a wave is defined as the no. of waves passing per unit of time. Therefore, the frequency of a wave can be calculated by the following formula:
[tex]f = \frac{n}{t}[/tex]
where,
f = frequency of the wave = ?
t = time passed = 1 s
n = no. of waves passing in time t = 2
Therefore,
[tex]f = \frac{2}{1\ s}[/tex]
f = 2 Hz
Describe what you could do to make the magnetic disk rotate faster
You could do to make the magnetic disk rotate faster: regular usage of a disc defragmentation program.
What is magnetic disk?A magnetic disk is a storage device that writes, rewrites, and accesses data using the magnetization process. It has a magnetic layer that retains data as tracks, spots, and sectors.
You could do to make the magnetic disk rotate faster:
Plan regular usage of a disc defragmentation program.Try to keep at least 20% of your disc space free, if you can. Defragmentation is facilitated and fragmentation is reduced as a result. Utilize a program like Crystal DiskInfo to regularly check the condition of your drive.Learn more about magnetic disk here:
https://brainly.com/question/29910303
#SPJ1
A ____ exerted by an object on another is a force
Answer:
A gravitational force exerted by an object on another is a force.
Explanation:
hope it helps
If a dolphin is producing a vocalization with a frequency of 35 Hz, traveling at 1,470 m/s, what is the wavelength of the soun
According to the equation wavelength = speed/frequency, the dolphin's sound has a 42 m wavelength.
What does wavelength mean?The distance between two identification based (consecutive crests) in adjoining cycles of a waveform signal as it travels across space or along wire is known as its wavelength. In wireless systems, this length is frequently specified in metres (m), centimetres (cm), or millimeters (mm). The numbers of times per second that a sound waves wave repeats is its frequency, which is often referred to as its pitch.
Given data -
speed = 1,470 m/s
frequency = 35 Hz
wavelength = speed / frequency
wavelength = 1,470 / 35
wavelength = 42 m.
To know more about wavelength visit :-
https://brainly.com/question/7143261
#SPJ4
G Two tiny particles having charges +20. 0 μC and -8. 00 μC are separated by a distance of 20. 0 cm. What are the magnitude and direction of electric field midway between these two charges? (k = 1/4πε0 = 9. 0 × 109 N ∙ m2/C2)(calculate separately electric field due to each charge at that point, next taking into account direction of each field find net electric field)
The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.
The magnitude of the electric field due to the positive charge at the midpoint is:
E = k * q / r^2
E = (9.0 x 10^9 N * m^2/C^2) * (20.0 x 10^-6 C) / (0.20 m)
E = 4.5 x 10^9 N/C
The magnitude of the electric field due to the negative charge at the midpoint is:
E = k * q / r^2
E = (9.0 x 10^9 N * m^2/C^2) * (-8.00 x 10^-6 C) / (0.20 m)
E = -1.8 x 10^9 N/C
The direction of the electric field due to the positive charge is away from the charge, and the direction of the electric field due to the negative charge is towards the charge.
To find the net electric field, we add the vectors of the two electric fields. Since the vectors are in opposite directions, we subtract the negative vector from the positive vector.
E_net = E_positive + E_negative
E_net = (4.5 x 10^9 N/C) + (-1.8 x 10^9 N/C)
E_net = 2.7 x 10^9 N/C
The magnitude of the net electric field is 2.7 x 10^9 N/C, and the direction is away from the positive charge and towards the negative charge.
Learn more about the magnitude of the net electric field here: https://brainly.com/question/29679588
#SPJ4
Throw a paper ball towards a hard wall.
a) Did the wall apply force on the ball? If yes, then what is the name of the force?
b) What are the effects of the force applied by the wall
please help..!
also if possible could you give the explanation too....??
Think of another topic in science that would lend itself to creating a word web. What is the main topic and list six subtopics you would include under it. You could use a whole subject area like chemistry or the desert. Pick a topic you know something about. Help me with this please
The study of computers and computing, encompassing the theoretical and algorithmic underpinnings, hardware and software, and applications for information processing, is known as computer science.
Uses and advantages:The study of algorithms and data structures, computer and network design, the modelling of data and information processes, and artificial intelligence are all included in the field of computer science. Since mathematics and engineering provide some of the underpinnings for computer science, it integrates concepts from those fields as well as queueing theory, probability and statistics, and electrical circuit design. As new algorithms, information structures, and computer architectures are conceptualised, designed, measured, and improved in computer science, extensive use of hypothesis testing and experimentation is also used.
Computer science is regarded as one of five distinct but related fields, including computer engineering, information systems, information technology, and software engineering. This family has come to be known collectively as the discipline of computing.
To learn more about computer science visit:
brainly.com/question/20837448
#SPJ4
A student heats 3.55 g of copper and 4.60 g of iodine for 6.25 g of a new compound. All of the iodine reacted, but there is some copper left over unused. How much copper is left?
The mass of copper that is left unreacted at the end of the chemical reaction is 1.90 g
What mass of copper is left unreacted at the end of the reaction?The mass of copper that is left untreated at the end of the chemical reaction is determined as follows:
Mass of copper before the reaction = 3.55 g
Mass of iodine before the reaction = 4.60 g
Mass of product = 6.25 g
According to the law of conservation of mass;
Mass of reactant = mass of product + mass of unreacted copper
Mass of reactants = 3.55 + 4.60
Mass of reactants = 8.15 g
The difference in the mass of the product obtained and the mass of the unreacted copper
Mass of unreacted copper = 8.15 g - 6.25 g
Mass of unreacted copper = 1.90 g
Learn more about the law of conservation of mass at: https://brainly.com/question/1992248
#SPJ1