The value of induced emf 1.68 seconds after the circuit is closed is approximately equal to 0.522 V.
The voltage, `V` across a series RL circuit, at any given time is given by `V = IR + L (di/dt)
If a 2.05 V battery is connected to a series RL circuit, a resistance of R = 0.555 Ω and an inductance of L = 2.63 H is present. To determine the induced emf 1.68 s after the circuit is closed, the current flowing through the circuit is required.
The current flow is determined by using Ohm's Law:V = IR
Let us determine the current flowing through the circuit by using Ohm's Law: V = IR => I = V/R = 2.05/0.555 = 3.69
A`The voltage drop across the inductor is given by `L (di/dt)`; where `i` is the current flowing through the circuit. The current flowing through the circuit can be represented by the following expression:
i = I (1 - [tex]e^{-Rt/L}[/tex]).
Using the expression for current, we get di/dt = R/L I ( [tex]e^{-Rt/L}[/tex]).
The voltage across the inductor, at any given time t after the circuit is closed, is therefore given by:`
VL = L (di/dt) = L (R/L I ( [tex]e^{-Rt/L}[/tex]).
Substituting the values, we have: VL = 2.63 (0.555/2.63) * 3.69 * [tex]e^{-0.555*1.68/2.63}[/tex]
The value of induced emf 1.68 seconds after the circuit is closed is approximately equal to 0.522 V.
To learn about induced emf here:
https://brainly.com/question/13744192
#SPJ11
A wheel with radius 37.9 cm rotates 5.77 times every second. Find the period of this motion. period: What is the tangential speed of a wad of chewing gum stuck to the rim of the wheel? tangential speed: m/s A device for acclimating military pilots to the high accelerations they must experience consists of a horizontal beam that rotates horizontally about one end while the pilot is seated at the other end. In order to achieve a radial acceleration of 26.9 m/s 2
with a beam of length 5.69 m, what rotation frequency is required? A electric model train travels at 0.317 m/s around a circular track of radius 1.79 m. How many revolutions does it perform per second (i.e, what is the motion's frequency)? frequency: Suppose a wheel with a tire mounted on it is rotating at the constant rate of 2.17 times a second. A tack is stuck in the tire at a distance of 0.351 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: m/s What is the tack's centripetal acceleration? centripetal acceleration: m/s 2
Therefore, the tack's centripetal acceleration is approximately 65.2 m/s².
The given radius of a wheel is r = 37.9 cm, and it rotates 5.77 times every second. Let's find the period of this motion. The period is defined as the time taken by an object to complete one full cycle. It can be calculated using the formula: T = 1/f. where T is the period and f is the frequency. The frequency is given by: f = 5.77 rotations/sec. We can plug in the value of frequency in the above equation to get the period: T = 1/5.77 ≈ 0.173 seconds Now, let's find the tangential speed of a wad of chewing gum stuck to the rim of the wheel. The tangential speed is defined as the linear speed of an object moving along a circular path and can be calculated using the formula: v = rw where v is the tangential speed, r is the radius, and w is the angular velocity. The angular velocity can be calculated as follows: w = 2πf.
where f is the frequency. We can plug in the value of f in the above equation to get:w = 2π × 5.77 ≈ 36.24 rad/s. Now, let's plug in the values of r and w in the formula to get the tangential speed: v = rw = 37.9 × 36.24 ≈ 1374.08 cm/s = 13.74 m/s. Therefore, the tangential speed of a wad of chewing gum stuck to the rim of the wheel is approximately 13.74 m/s. Now let's find the rotation frequency that is required to achieve a radial acceleration of 26.9 m/s² with a beam of length 5.69 m. The radial acceleration is given by: a = w²rwhere w is the angular velocity and r is the radius. In this case, the radius is equal to the length of the beam, so:cr = 5.69 mWe want the radial acceleration to be 26.9 m/s², so we can plug in these values in the above formula to get:26.9 = w² × 5.69Now, let's solve for w:w² = 26.9/5.69 ≈ 4.72w ≈ 2.17 rad/s, The rotation frequency is equal to the angular velocity divided by 2π, so we can find it as follows: f = w/2π = 2.17/2π ≈ 0.345 Hz.n Therefore, the rotation frequency required to achieve a radial acceleration of 26.9 m/s² with a beam of length 5.69 m is approximately 0.345 Hz. Let's find the number of revolutions the electric model train performs per second. The speed of the train is v = 0.317 m/s, and the radius of the circular track is r = 1.79 m. The frequency is defined as the number of cycles per second, and in this case, each cycle is one full rotation around the circular track. Therefore, the frequency is equal to the number of rotations per second. The tangential speed is given by:v = rwwhere w is the angular velocity. We can rearrange this equation to get:w = v/rNow, let's plug in the values of v and r to get:w = 0.317/1.79 ≈ 0.177 rad/sThe frequency is given by:f = w/2π = 0.177/2π ≈ 0.0281 HzThe number of revolutions per second is equal to the frequency, so the train performs approximately 0.0281 revolutions per second. Finally, let's find the tack's tangential speed and centripetal acceleration. The distance between the tack and the axis of rotation is d = 0.351 m. The tangential speed is equal to the linear speed of a point on the tire at the distance d from the axis of rotation. We can find it as follows:v = rwwhere r is the radius and w is the angular velocity. The radius is equal to the distance between the tack and the axis of rotation, so:r = dNow, let's find the angular velocity. One rotation is equal to one circumference, which is equal to 2π times the radius of the tire. Therefore, the angular velocity is:w = 2πfwhere f is the frequency. We can find the frequency as follows:f = 2.17 rotations/secondThe angular velocity is:w = 2π × 2.17 ≈ 13.65 rad/sNow, let's plug in the values of r and w in the formula to get the tangential speed:v = rw = 0.351 × 13.65 ≈ 4.79 m/sTherefore, the tack's tangential speed is approximately 4.79 m/s. The centripetal acceleration is given by:a = v²/rwhere v is the tangential speed and r is the radius.We can plug in the values of v and r to get:a = v²/r = (4.79)²/0.351 ≈ 65.2 m/s². Therefore, the tack's centripetal acceleration is approximately 65.2 m/s².
To know more about rotating visit:
https://brainly.com/question/14812660
#SPJ11
Vector A points in the negative z direction. Vector points at an angle of 31.0" above the positive z axis. Vector C has a magnitude of 16 m and points in a direction 42.0* below the positive x axis. Part B Express your answer using two significant figures. |B|= ________ m
Vector A points in the negative z direction. Vector points at an angle of 31.0" above the positive z axis. Vector C has a magnitude of 16 m and points in a direction 42.0* below the positive x axis.
Vector A, A = {0, 0, -a}
Vector C, C = {16 cos 42.0°, 0, - 16 sin 42.0°}
Let B = A + B + C. Hence, B = {0, 0, -a} + {B sin 31.0° cos θ, B sin 31.0° sin θ, B cos 31.0°} + {16 cos 42.0°, 0, - 16 sin 42.0°}
Then, equating the x, y, and z components of the above equation separately, we get:
B sin 31.0° cos θ = - 16 cos 42.0°B sin 31.0° sin θ = 0
B cos 31.0° = a - 16 sin 42.0°
From the second equation, we have B = 0 or sin θ = 0, we have B = 0. But, B = 0 doesn't satisfy the third equation. Hence, sin θ = 0. So, θ = 0° or θ = 180°.When θ = 0°, we get,
B sin 31.0° cos θ = - 16 cos 42.0°B sin 31.0° (1) = - 16 cos 42.0°
B = - 16 cos 42.0° / sin 31.0°
Then, |B| = 22 m (approx.)
So, the required value of |B| is 22 m (approx.)
Note: You can also solve it by using the dot product of the vectors.
Learn more about vectors: https://brainly.com/question/17177764
#SPJ11
An electric bus operates by drawing current from two parallel overhead cables that are both at a potential difference of 380 V and are spaced 89 cm apart. The current in both cables is in the same direction. The power input (from each wire) to the bus's motor is at its maximum power of 19 kW. a. What current does the motor draw? A b. What is the magnetic force per unit length between the cables?
(a) The current that the motor draws is 100 A
(b) The magnetic force per unit length between the cables is 0.116 N/m.
The power input to the motor from each wire is maximum, i.e., P = 19 kW. Thus, the total power input to the motor is
2 × P = 38 kW.
We know that, Power (P) = V x I where V is the potential difference between the cables and I is the current flowing through them. So, the current drawn by the motor is given as
I = P / V
Substitute the given values, P = 38 kW and V = 380 V
Therefore, I = 38 x 10^3 / 380 = 100 A.
The distance between the cables is 89 cm. So, the magnetic force per unit length between the cables is given by
f = μ₀I²l / 2πd where μ₀ = 4π × 10⁻⁷ T m/A is the permeability of free space, I is the current in the cables, l is the length of the section of each cable where the magnetic field is to be calculated and d is the distance between the cables.
In this case, l = d = 89 cm = 0.89 m.
Substitute the given values,μ₀ = 4π × 10⁻⁷ T m/AI = 100 Al = d = 0.89 m
Therefore, f = μ₀I²l / 2πd= 4π × 10⁻⁷ × 100² × 0.89 / (2 × π × 0.89)= 0.116 N/m
Therefore, the magnetic force per unit length between the cables is 0.116 N/m.
Thus the current drawn by the motor is 100 A and the magnetic force per unit length between the cables is 0.116 N/m.
Learn more about magnetic force https://brainly.com/question/2279150
#SPJ11
Electrons in an x-ray machine are accelerated from rest through a potential difference of 60 000 V. What is the kinetic energy of each of these electrons in eV?
60 eV
96 eV
38 eV
60 keV
120 eV
Electrons in an x-ray machine are accelerated from rest through a potential difference of 60 000 V. Therefore, the kinetic energy of each of these electrons is 60 keV.
Given ,Potential difference, V = 60,000 V. The energy of an electron, E = potential difference x charge of an electron (e)
The charge of an electron is e = 1.6 × 10⁻¹⁹CThe kinetic energy of an electron is calculated by using the formula, Kinetic energy = energy of an electron - energy required to remove an electron from an atom = E - ϕ where, ϕ is work function, which is the energy required to remove an electron from an atom.
This can be expressed as, Kinetic energy of an electron = eV - ϕ Now, let's find the energy of an electron.
Energy of an electron, E = potential difference x charge of an electron (e)= 60,000 V × 1.6 × 10⁻¹⁹C = 9.6 × 10⁻¹⁵ J
Now, to find the kinetic energy of each of these electrons in eV, Kinetic energy of an electron = E/e= (9.6 × 10⁻¹⁵ J) / (1.6 × 10⁻¹⁹ C) = 6 × 10⁴ eV= 60 keV
Therefore, the kinetic energy of each of these electrons in eV is 60 keV.
Learn more about Kinetic energy here:
https://brainly.com/question/26405082
#SPJ11
A solid 56-kg sphere of U-235 is just large enough to constitute a critical mass. If the sphere were flattened into a pancake shape, would it still be critical? Briefly explain.
The critical mass of a fissile material, such as U-235, is the minimum amount required to sustain a self-sustaining chain reaction. It depends on various factors, including the shape, density, and enrichment of the material.
In the case of a solid sphere of U-235 with a mass of 56 kg, it is critical because the shape and density of the sphere are carefully designed to ensure a self-sustaining chain reaction. Any change in the shape or density of the material can potentially affect its criticality.
If the sphere were flattened into a pancake shape, the distribution of the material would change. The pancake shape would increase the surface area of the U-235, which could lead to increased neutron leakage and reduced neutron multiplication. This change in geometry can disrupt the criticality of the system.
Moreover, the pancake shape may also alter the density of the U-235 material. The critical mass depends on the density of the material because a higher density allows for a more efficient neutron capture and fission process. Flattening the sphere could potentially decrease the density, further affecting the criticality.
In summary, changing the shape of the U-235 sphere from a solid sphere to a pancake shape can disrupt the criticality of the system. The specific critical mass and shape requirements for a self-sustaining chain reaction depend on the detailed design and calculations for a particular nuclear reactor or weapon.
To learn more about critical mass visit: https://brainly.com/question/12814600
#SPJ11
Consider an electron bound in a hydrogen atom under the influence of a homogeneous magnetic field B= z
^
B. Ignore the electron spin. The Hamiltonian of the system is H=H 0
−ωL z
with ω≡∣e∣B/2m e
c. The eigenstates ∣nℓm⟩ and eigenvalues E n
(0)
of the unperturbed hydrogen atom Hamiltonian H 0
are to be considered as known. Assume that initially (at t=0 ) the system is in the state ∣ψ(0)⟩= 2
1
(∣21−1⟩−∣211⟩) Calculate the expectation value of the magnetic dipole moment associated with the orbital angular momentum at time t.
When a homogeneous magnetic field is applied to a hydrogen atom with an electron in the ground state, the energy levels of the electron will split into multiple sublevels. This phenomenon is known as Zeeman splitting.
In the absence of a magnetic field, the electron in the ground state occupies a single energy level. However, when the magnetic field is introduced, the electron's energy levels will split into different sublevels based on the interaction between the magnetic field and the electron's spin and orbital angular momentum.
The number of sublevels and their specific energies depend on the strength of the magnetic field and the quantum numbers associated with the electron. The splitting of the energy levels is observed due to the interaction between the magnetic field and the magnetic moment of the electron.
To know more about homogeneous magnetic field, here
brainly.com/question/13488101
#SPJ4
--The complete Question is, Consider an electron bound in a hydrogen atom under the influence of a homogeneous magnetic field B = z. If the electron is initially in the ground state, what will happen to its energy levels when the magnetic field is applied?--
A small steel ball moves in a vertical circle in a counter-clockwise direction with an angular velocity of 4 radians/s. with a radius of 2.50 m at a time t = 0 s. The shadow of this steel ball is at +1.00 m in the X-axis and is moving to the right.
a) Find xt) indicating its position. (SI units)
b) Find the velocity and acceleration in the X-axis as a function of the time of this shadow.
Mass 100 g is attached to the tip of an aerated spring with spring constant. 20.0 Nm, then this mass is taken out at a distance of 10.00 cm from the equilibrium point. and released from standstill
a) Find the period of vibration
b) What is the magnitude of the greatest acceleration of this mass? and where does it occur?
c) What is the greatest velocity of this mass?
d) Write the equation of motion as a function of time in SI to express position (t), velocity V(t), and acceleration a(t)
(a) The period of vibration of the mass attached to the spring is 0.279 s.
(b) The greatest acceleration of the mass is 2.00 m/s² and it occurs when the mass is at its maximum displacement from the equilibrium point.
(c) The velocity is maximum and the acceleration is zero.
(d) The equation of motion for a mass-spring system can be written as:
m * d²x(t)/dt² + k * x(t) = 0
a) To find the position of the shadow at a given time t, we can use the equation for circular motion:
x(t) = r * cos(θ(t))
where x(t) is the position of the shadow in the X-axis, r is the radius of the circular path (2.50 m), and θ(t) is the angular position at time t.
The angular position can be determined using the angular velocity:
θ(t) = θ₀ + ω * t
where θ₀ is the initial angular position (0 radians), ω is the angular velocity (4 radians/s), and t is the time.
Plugging in the values:
θ(t) = 0 + 4 * t
x(t) = 2.50 * cos(4 * t)
b) The velocity of the shadow in the X-axis can be found by differentiating the position equation with respect to time:
v(t) = dx(t)/dt = -2.50 * 4 * sin(4 * t)
The acceleration of the shadow in the X-axis can be found by differentiating the velocity equation with respect to time:
a(t) = dv(t)/dt = -2.50 * 4 * 4 * cos(4 * t)
So, the velocity as a function of time is given by v(t) = -10 * sin(4 * t), and the acceleration as a function of time is given by a(t) = -40 * cos(4 * t).
Moving on to the second part of your question:
a) To find the period of vibration of the mass attached to the spring, we can use the equation for the period of a mass-spring system:
T = 2π * sqrt(m/k)
where T is the period, m is the mass (100 g = 0.1 kg), and k is the spring constant (20.0 N/m).
Plugging in the values:
T = 2π * sqrt(0.1 / 20) ≈ 2π * sqrt(0.005) ≈ 0.279 s
b) The magnitude of the greatest acceleration of the mass occurs when it is at the maximum displacement from the equilibrium point. At this point, the acceleration is given by:
a_max = k * x_max
where x_max is the maximum displacement from the equilibrium point (10.00 cm = 0.10 m).
Plugging in the values:
a_max = 20.0 * 0.10 = 2.00 m/s²
The greatest acceleration of the mass is 2.00 m/s² and it occurs when the mass is at its maximum displacement from the equilibrium point.
c) The greatest velocity of the mass occurs when it passes through the equilibrium point. At this point, the velocity is maximum and the acceleration is zero.
d) The equation of motion for a mass-spring system can be written as:
m * d²x(t)/dt² + k * x(t) = 0
This is a second-order linear homogeneous differential equation. Solving this equation will give us the position (x(t)), velocity (v(t)), and acceleration (a(t)) as functions of time.
However, since you have already released the mass from standstill, we can assume the initial conditions as follows:
x(0) = 0 (the mass is released from the equilibrium position)
v(0) = 0 (the mass is initially at rest)
Given these initial conditions, the equation of motion can be rewritten as:
d²x(t)/dt² + (k/m) * x(t) = 0
where (k/m) is the angular frequency squared (ω²) of the system.
To learn more about circular motion visit:
brainly.com/question/29312275
#SPJ11
The LC circuit of a radar transmitter oscillates at 2.70 GHz. (a) What inductance is required for the circuit to resonate at this frequency if its capacitance is 2.30 pF? pH (b) What is the inductive reactance of the circuit at this frequency?
The inductive reactance of the circuit at a frequency of 2.70 GHz is approximately 143.45 Ω.
(a) The resonant frequency of an LC circuit can be calculated using the formula f = 1 / (2π√(LC)), where f is the resonant frequency, L is the inductance, and C is the capacitance. Rearranging the formula, we can solve for L:
L = 1 / (4π²f²C)
Substituting the given values of f = 2.70 GHz (2.70 x 10^9 Hz) and C = 2.30 pF (2.30 x 10^(-12) F) into the formula, we can calculate the required inductance:
L = 1 / (4π² x (2.70 x 10^9)² x (2.30 x 10^(-12)))
L ≈ 8.46 nH
Therefore, the required inductance for the LC circuit to resonate at a frequency of 2.70 GHz with a capacitance of 2.30 pF is approximately 8.46 nH.
(b) The inductive reactance of the circuit at the resonant frequency can be determined using the formula XL = 2πfL, where XL is the inductive reactance. Substituting the values of f = 2.70 GHz and L = 8.46 nH into the formula, we can calculate the inductive reactance:
XL = 2π x (2.70 x 10^9) x (8.46 x 10^(-9))
XL ≈ 143.45 Ω
Learn more about inductive reactance here:
https://brainly.com/question/30752659
#SPJ11
The acceleration of gravity of the surface of Mars is about 38% that on Earth. If the oxygen tank carried by an astronaut weighs 300 lb on Earth, what does it weigh on Mars? 790 lb 300 lb 135 lb 114 lb
The weight of the oxygen tank on Mars is approximately 114 lb, which corresponds to option D) in the given choices.
The weight of an object is determined by the force of gravity acting on it. On Mars, the acceleration due to gravity is approximately 38% of that on Earth. Since weight is directly proportional to acceleration due to gravity, we can calculate the weight of the oxygen tank on Mars.
Given that the weight of the oxygen tank on Earth is 300 lb, we can use the ratio of Mars' gravity to Earth's gravity to find its weight on Mars.
Weight on Mars = (Weight on Earth) * (Mars' gravity / Earth's gravity)
Weight on Mars = 300 lb * (0.38)
Weight on Mars ≈ 114 lb
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
Select the correct answer.
In which item is energy stored in the form of gravitational potential energy?
A.
a slice of bread
B.
a compressed spring
C.
an apple on a tree
D.
a stretched bow string
Reset Next
C. an apple on a tree as energy stored in the form of gravitational potential energy.
Gravitational potential energy is a form of energy that an object possesses due to its position in a gravitational field.
It is directly related to the height or vertical position of the object relative to a reference point.
Out of the given options, only the apple on a tree possesses gravitational potential energy because it is located above the ground.
As the apple is raised higher on the tree, its gravitational potential energy increases accordingly.
Thus, option C, "an apple on a tree," is the correct choice.
To learn more about Gravitational potential energy,
https://brainly.com/question/15896499
flint-glass prism (c24p50) Light is normally incident on one face of a \( 27^{\circ} \) fint-glass prism. Calculate the angular separation \( ( \) deg \( ) \) of red light \( (\lambda=650.0 n \mathrm{
When light passes through a flint-glass prism, it undergoes refraction, causing the different wavelengths of light to separate. By using the prism's refractive index and the angle of incidence, we can calculate the angular separation of red light with a wavelength of 650.0 nm.
The angular separation of light in a prism can be determined using the formula \( \theta = A - D \), where \( \theta \) is the angular separation, \( A \) is the angle of incidence, and \( D \) is the angle of deviation. The angle of deviation can be calculated using Snell's law, which states that \( n_1 \sin(A) = n_2 \sin(D) \), where \( n_1 \) and \( n_2 \) are the refractive indices of the medium of incidence and the prism, respectively.
In this case, since the light is incident normally, the angle of incidence \( A \) is 0 degrees. The refractive index of the flint-glass prism can be obtained from reference tables or known values. Let's assume it is \( n = 1.6 \).
To calculate the angle of deviation \( D \), we rearrange Snell's law to \( \sin(D) = \frac{n_1}{n_2} \sin(A) \), and since \( A = 0 \), we have \( \sin(D) = 0 \). This means that the light passing through the prism is undeviated.
Therefore, the angular separation \( \theta \) is also 0 degrees. This implies that red light with a wavelength of 650.0 nm will not undergo any angular separation when passing through the given flint-glass prism.
Learn more about flint-glass prism here:
https://brainly.com/question/7549221
#SPJ11
An object is 4 cm from a converging lens with a focal length of 2.5 cm. What is the magnification, including the sign, for the image that is produced? (The sign tells if the image is inverted.) M=−1.67
M=6.67
M=−1.0
M=2.35
The magnification of the image produced by the lens is -0.38.
Magnification of an image refers to how much larger or smaller an image is than the object itself. The formula for magnification is given by;
M = -v / uwhere, M = Magnification of the imagev = Distance of the imageu = Distance of the object
To find the sign of the image, the following formula can be used:
f = Focal length of the lensIf the value of v is negative, it indicates that the image is real and inverted. If the value of v is positive, the image is virtual and erect.
A converging lens has a focal length of 2.5 cm, and the object is 4 cm away from the lens.
u = -4 cm (as the object is real) and
f = 2.5 cm (as the lens is converging)
Now, substitute the given values in the magnification formula to get the magnification.
M = -v / u
M = -(f / (f - u))
M = -(2.5 / (2.5 - (-4)))
M = -2.5 / 6.5M = -0.38
Hence, the magnification of the image produced by the lens is -0.38.
Know more about converging lens here,
https://brainly.com/question/29763195
#SPJ11
Shaving/makeup mirrors typically have one flat and one concave (magnifying) surface. You find that you can project a magnified image of a lightbulb onto the wall of your bathroom if you hold the mirror 1.8 m from the bulb and 3.5 m from the wall. (a) What is the magnification of the image? (b) Is the image erect or inverted? (c) What is the focal length of the mirror?
The magnification is approximately -1.944, indicating an inverted image. The focal length of the mirror is approximately 1.189 meters. To determine the magnification of the image formed by the magnifying mirror, we can use the mirror equation:
1/f = 1/d₀ + 1/dᵢ,
where f is the focal length of the mirror, d₀ is the object distance (distance from the bulb to the mirror), and dᵢ is the image distance (distance from the mirror to the wall).
(a) Magnification (m) is given by the ratio of the image distance to the object distance:
m = -dᵢ/d₀,
where the negative sign indicates an inverted image.
(b) The sign of the magnification tells us whether the image is erect or inverted. If the magnification is positive, the image is erect; if it is negative, the image is inverted.
(c) To find the focal length of the mirror, we can rearrange the mirror equation 1/f = 1/d₀ + 1/dᵢ, and solve for f.
d₀ = 1.8 m (object distance)
dᵢ = 3.5 m (image distance)
(a) Magnification:
m = -dᵢ/d₀ = -(3.5 m)/(1.8 m) ≈ -1.944
The magnification is approximately -1.944, indicating an inverted image.
(b) The image is inverted.
(c) Focal length:
1/f = 1/d₀ + 1/dᵢ = 1/1.8 m + 1/3.5 m ≈ 0.5556 + 0.2857 ≈ 0.8413
Now, solving for f:
f = 1/(0.8413) ≈ 1.189 m
The focal length of the mirror is approximately 1.189 meters.
Learn more about focal length here:
https://brainly.com/question/31755962
#SPJ11
A speed skater moving across frictionless ice at 8.0 m/s hits a 6.0 m -wide patch of rough ice. She slows steadily, then continues on at 6.1 m/s . Part A What is her acceleration on the rough ice? Express your answer in meters per second squared. a = m/s2
The problem requires us to calculate the acceleration of a speed skater when she moves across a frictionless ice and hits a 6.0 m-wide patch of rough ice.
The initial velocity (u) of the speed skater = 8.0 m/s
The final velocity (v) of the speed skater = 6.1 m/s
The distance covered (s) by the speed skater = 6.0 m
The formula used here is given below:
v² = u² + 2as
where,v = final velocity
u = initial velocity
a = acceleration
and s = distance covered.
a = (v² - u²) / 2s
= (6.1² - 8.0²) / 2(6.0)a
= -2.48 m/s² [Negative sign shows the speed skater is decelerating]
Hence, the acceleration of the speed skater on the rough ice is -2.48 m/s² (rounded to two decimal places).
Note: The distance covered by the speed skater is 6.0 m only. The distance is not a factor here as the acceleration of the skater is concerned.
Learn more about decelerating here
https://brainly.in/question/325091
#SPJ11
A home run is hit such a way that the baseball just clears a wall 24 m high located 135 m from home plate. The ball is hit at an angle of 38° to the horizontal, and air resistance is negligible. Assume the ball is hit at a height of 2 m above the ground. The acceleration of gravity is 9.8 m/s2. What is the initial speed of the ball? Answer in units of m/s. Answer in units of m/s
The initial speed of the ball that is hit at an angle of 38° to the horizontal and air resistance is negligible found to be approximately 41.1 m/s.
To find the initial speed of the baseball, which just clears a 24 m high wall located 135 m from home plate, we can use the kinematic equations and consider the projectile motion of the ball.
In projectile motion, the vertical and horizontal components of motion are independent of each other. The vertical motion is influenced by gravity, while the horizontal motion remains constant.
Given that the ball just clears a 24 m high wall, we can use the vertical motion equation: h = v₀²sin²θ / (2g), where h is the height, v₀ is the initial speed, θ is the angle of projection, and g is the acceleration due to gravity.
Plugging in the values, we have 24 = v₀²sin²38° / (2 * 9.8). Solving for v₀, we find v₀ ≈ 41.1 m/s.
Learn more about kinematic equations here:
https://brainly.com/question/24458315
#SPJ11
I'm supposed to label potential energy, kinetic energy, and thermal energy on parts of a roller coaster as it goes through hills and valleys. I get how to do the kinetic and potential energy, but how does thermal energy come in and how much would exist at each point?
The assignment calls for pie charts after doing my coaster. I'm good with making pie charts, but I'm really confused on thermal energy. When is it higher, when is it lower, etc?
The force of friction between the coaster and the tracks produces thermal energy. When a coaster reaches the top of a hill, it has a lot of potential energy but little kinetic energy and thermal energy. speed of the coaster is at its maximum at the bottom of the hill, so there is more friction between the tracks and the coaster
In the roller coaster, potential energy is maximum at the highest point.
As the cart comes down from that point, potential energy gets converted into kinetic energy.
In addition, thermal energy is generated as a result of friction between the coaster and the tracks, which is also generated by the air resistance.
To make a pie chart, you need to compute the percentage of each type of energy in each part of the roller coaster (at the highest point, at the bottom of a valley, etc.) given the total energy.
Thermal energy in the roller coaster is related to friction and other forces that resist motion.
The force of friction between the coaster and the tracks produces thermal energy.
When a coaster reaches the top of a hill, it has a lot of potential energy but little kinetic energy and thermal energy.
At the bottom of a hill, the kinetic and potential energies are at their lowest, but the thermal energy is at its highest.
This is due to the fact that the speed of the coaster is at its maximum at the bottom of the hill, so there is more friction between the tracks and the coaster, which results in more thermal energy.
Learn more about friction here:
https://brainly.com/question/13000653
#SPJ11
A 2.6 kg mass is connected to a spring (k=106 N/m) and is sliding on a horizontal frictionless surface. The mass is given an initial displacement of +10 cm and released with an initial velocity of -11 cm/s. Determine the acceleration of the spring at t=4.6 seconds. (include units with answer)
When a 2.6 kg mass connected to a spring (k=106 N/m) is sliding on a horizontal frictionless surface then the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex].
To determine the acceleration of the spring at t=4.6 seconds, we can use the equation of motion for a mass-spring system:
m * a = -k * x
where m is the mass, a is the acceleration, k is the spring constant, and x is the displacement from the equilibrium position.
Given:
m = 2.6 kg
k = 106 N/m
x = 10 cm = 0.1 m (initial displacement)
v = -11 cm/s = -0.11 m/s (initial velocity)
t = 4.6 s
First, let's calculate the position of the mass at t=4.6 seconds. Since the motion is oscillatory, we can use the equation:
x(t) = A * cos(ωt) + B * sin(ωt)
where A and B are constants determined by the initial conditions, and ω is the angular frequency.
To find A and B, we need to use the initial displacement and velocity:
x(0) = A * cos(0) + B * sin(0) = A * 1 + B * 0 = A = 0.1 m
v(0) = -A * ω * sin(0) + B * ω * cos(0) = B * ω = -0.11 m/s
Since A = 0.1 m, we have B * ω = -0.11 m/s.
Rearranging the equation, we get:
B = -0.11 m/s / ω
Substituting the value of A and B into the equation for x(t), we have:
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
To determine ω, we use the relation between ω and k:
ω = sqrt(k / m)
Plugging in the values of k and m, we get:
ω = sqrt(106 N/m / 2.6 kg)
Now we can calculate the acceleration at t=4.6 seconds using the equation:
a(t) = -ω^2 * x(t)
To substitute the values and calculate the acceleration at t = 4.6 seconds, let's first find the values of ω, x(t), and B:
ω = sqrt(106 N/m / 2.6 kg) ≈ 5.691 rad/s
x(t) = 0.1 * cos(ωt) - (0.11 / ω) * sin(ωt)
x(4.6) = 0.1 * cos(5.691 * 4.6) - (0.11 / 5.691) * sin(5.691 * 4.6) ≈ 0.019 m
Now we can calculate the acceleration:
a(t) = -ω^2 * x(t)
a(4.6) = -5.691^2 * 0.019 ≈ -0.194 m/[tex]s^2[/tex]
Therefore, the acceleration of the spring at t = 4.6 seconds is approximately -0.194 m/[tex]s^2[/tex]. The negative sign indicates that the acceleration is directed opposite to the initial displacement.
Learn more about acceleration here:
https://brainly.com/question/31479424
#SPJ11
(a) An amplitude modulated signal is given by the below equation: VAM (t) = 0.1[1 + 0.5 cos 6280t]. Sin [107t + 45°] V From the given information plot the frequency spectrum of the AM modulated signal. [7 marks] (b) The expression shown in the below equation describes the Frequency Modulated (FM) signal wave as a function of time: VFM (t) = 15 cos[2π(150 x 10³ t) + 5 cos (6 × 10³ nt)] V The carrier frequency is 150 KHz and modulating signal frequency is 3 KHz. The FM signal is coupled across a 10 2 load. Using the parameters provided, calculate maximum and minimum frequencies, modulation index and FM power that appears across the load: [12 marks] (c) Show the derivation that the general Amplitude Modulation (AM) equation has three frequencies generated from the signals below: Carrier signal, vc = Vc sinwet Message signal, um = Vm sin wmt
a) The frequency spectrum of the given AM modulated signal has the carrier frequency 6280 rad/s, upper sideband frequency 6387 rad/s, and lower sideband frequency 6173 rad/s.
b) The maximum and minimum frequencies are 150.0095 KHz and 149.9905 KHz respectively. FM power that appears across the load: 3.042 mW
c) general AM signal equation: Vm(t) = [A[tex]_{c}[/tex] cosω[tex]_{c}[/tex]t + (A[tex]_{m}[/tex]/2) cos(ω[tex]_{c}[/tex] + ω[tex]_{m}[/tex])t + (A[tex]_{m}[/tex]/2) cos(ω[tex]_{c}[/tex] - ω[tex]_{m}[/tex])t]
(a)Frequency spectrum of the AM modulated signal:
Given,
VAM (t) = 0.1[1 + 0.5 cos 6280t]. Sin [107t + 45°] V
The general form of the AM signal is given by:
Vm(t) = [A[tex]_{c}[/tex] + A[tex]_{m}[/tex] cosω[tex]_{m}[/tex]t] cosω[tex]_{c}[/tex]t
Let's compare the given signal and general form of the AM signal,
VAM (t) = 0.1[1 + 0.5 cos 6280t]. Sin [107t + 45°] V
Vm(t) = (0.5 x 0.1) cos (6280t) cos (107t + 45°)
Amplitude of carrier wave,
Ac = 0.1
Frequency of carrier wave,
ω[tex]_{c}[/tex] = 6280 rad/s
Amplitude of message signal,
A[tex]_{m}[/tex] = 0.05
Frequency of message signal,
ω[tex]_{m}[/tex] = 107 rad/s
Let's calculate the upper sideband frequency,
ω[tex]_{us}[/tex] = ω[tex]_{c}[/tex] + ω[tex]_{m}[/tex]= 6280 + 107 = 6387 rad/s
Let's calculate the lower sideband frequency,
ω[tex]_{ls}[/tex] = ω[tex]_{c}[/tex] - ω[tex]_{m}[/tex]= 6280 - 107 = 6173 rad/s
Hence, the frequency spectrum of the given AM modulated signal has the carrier frequency 6280 rad/s, upper sideband frequency 6387 rad/s, and lower sideband frequency 6173 rad/s.
(b) Calculation of maximum and minimum frequencies, modulation index, and FM power:
Given,
Carrier frequency, f[tex]_{c}[/tex] = 150 KHz
Modulating signal frequency, f[tex]_{m}[/tex] = 3 KHz
Coupling resistance, RL = 102 Ω
The general expression of FM signal is given by:
VFM (t) = A[tex]_{c}[/tex] cos[ω[tex]_{c}[/tex]t + β sin(ω[tex]_{m}[/tex]t)]
Where, A[tex]_{c}[/tex] is the amplitude of the carrier wave ω[tex]c[/tex] is the carrier angular frequency
β is the modulation index
β = (Δf / f[tex]m[/tex])Where, Δf is the frequency deviation
Maximum frequency, f[tex]max[/tex] = f[tex]m[/tex]+ Δf
Minimum frequency, f[tex]min[/tex] = f[tex]_{c}[/tex] - Δf
Maximum phase deviation, φ[tex]max[/tex] = βf[tex]m[/tex]2π
Minimum phase deviation, φ[tex]min[/tex] = - βf[tex]m[/tex]2π
Let's calculate the modulation index, β = Δf / f[tex]m[/tex]= (f[tex]max[/tex] - f[tex]min[/tex]) / f[tex]m[/tex]= (150 + 7.5 - 150 + 7.5) / 3= 5/6000= 1/1200
Let's calculate the maximum and minimum frequencies, and FM power.
The value of maximum phase deviation, φ[tex]max[/tex] = βf[tex]m[/tex]2π= (1/1200) x 6 x 103 x 2π= π/1000
The value of minimum phase deviation, φ[tex]min[/tex] = - βf[tex]m[/tex]2π= -(1/1200) x 6 x 103 x 2π= -π/1000
Let's calculate the maximum frequency,
f[tex]max[/tex] = f[tex]c[/tex] + Δf= f[tex]c[/tex] + f[tex]m[/tex] φ[tex]max[/tex] / 2π= 150 x 103 + (3 x 103 x π / 1000)= 150.0095 KHz
Let's calculate the minimum frequency,
f[tex]min[/tex] = f[tex]c[/tex]- Δf= f[tex]c[/tex] - f[tex]m[/tex]
φ[tex]max[/tex] / 2π= 150 x 103 - (3 x 103 x π / 1000)= 149.9905 KHz
Hence, the maximum and minimum frequencies are 150.0095 KHz and 149.9905 KHz respectively.
Let's calculate the FM power,
[tex]PFM = (Vm^{2} / 2) (R_{L} / (R_{L} + Rs))^2[/tex]
Where, V[tex]m[/tex] = Ac β f[tex]m[/tex]R[tex]_{L}[/tex] is the load resistance
R[tex]s[/tex] is the internal resistance of the source
PFM = (0.5 x Ac² x β² x f[tex]m[/tex]² x R[tex]_{L}[/tex]) (R[tex]_{L}[/tex] / (R[tex]_{L}[/tex] + R[tex]s[/tex]))^2
PFM = (0.5 x 15² x (1/1200)² x (3 x 10³)² x 102) (102 / (102 + 10))²
PFM = 0.003042 W = 3.042 m W
(c) Derivation of general AM signal equation:
The equation of a general AM wave is,
V m(t) = [A[tex]c[/tex] + A[tex]m[/tex] cosω[tex]m[/tex]t] cosω[tex]c[/tex]t
Where, V m(t) = instantaneous value of the modulated signal
A[tex]c[/tex] = amplitude of the carrier wave
A[tex]m[/tex] = amplitude of the message signal
ω[tex]c[/tex] = angular frequency of the carrier wave
ω[tex]m[/tex] = angular frequency of the message signal
Let's find the frequency components of the general AM wave using trigonometric identities.
cosα cosβ = (1/2) [cos(α + β) + cos(α - β)]
cosα sinβ = (1/2) [sin(α + β) - sin(α - β)]
sinα cosβ = (1/2) [sin(α + β) + sin(α - β)]
sinα sinβ = (1/2) [cos(α - β) - cos(α + β)]
Vm(t) = [Ac cosω[tex]_{c}[/tex]t + (A[tex]m[/tex]/2) cos(ω[tex]_{c}[/tex]+ ω[tex]m[/tex])t + (A[tex]m[/tex]/2) cos(ω[tex]_{c}[/tex] - ω[tex]m[/tex])t]
From the above equation, it is clear that the modulated signal consists of three frequencies,
Carrier wave frequency ω[tex]_{c}[/tex]
Lower sideband frequency (ω[tex]_{c}[/tex]- ω[tex]m[/tex])
Upper sideband frequency (ω[tex]_{c}[/tex] + ω[tex]m[/tex])
Hence, this is the derivation of the general AM signal equation which shows the generation of three frequencies from the carrier and message signals.
learn more about AM modulated signal here:
https://brainly.com/question/24208227
#SPJ11
A typical wall outlet in a place of residence in North America is RATED 120V, 60Hz. Knowing that the voltage is a sinusoidal waveform, calculate its: a. PERIOD b. PEAK VOLTAGE Sketch: c. one cycle of this waveform (using appropriate x-y axes: show the period on the y-axis and the peak voltage on the x-axis)
The typical wall outlet in North America has a rated voltage of 120V and operates at a frequency of 60Hz. The period of the voltage waveform is 1/60 seconds, and the peak voltage is ±170V.
The frequency of the voltage waveform represents the number of complete cycles per second, which is given as 60Hz. The period of the waveform can be calculated by taking the reciprocal of the frequency: 1/60 seconds. This means that the waveform completes one cycle every 1/60 seconds.
The peak voltage refers to the maximum voltage value reached by the waveform. In this case, the rated voltage is 120V, which represents the RMS voltage. Since the waveform is sinusoidal, the peak voltage can be both positive and negative. The [tex]V_{peak} = \sqrt{2} V_{RMS} = \sqrt{2} * 120 V = 170V[/tex]. Therefore, the peak voltage is ±170V, indicating that the voltage swings from positive 170V to negative 170V during each cycle.
The cycle of wave form is given below.
Learn more about frequency here:
https://brainly.com/question/31938473
#SPJ11
A meter stick in frame S'makes an angle of 34° with the x'axis. If that frame moves parallel to the x axis of frame S with speed 0.970 relative to frame S, what is the length of the stick as measured from S? Number __________ Units _________
The length of the stick as measured from S is 0.59 meter according to stated information.
The formula to be used here is:
Lx = L ✓(1 - (v/c)²)
The speed of light is known universally.
Lx = 1 ✓(1 - (0.970c/c)²)
Lx = ✓1 - 0.970²
Lx = ✓1 - 0.94
Lx = ✓0.0591
Lx = 0.243 meter
Length of meter stick will be further calculated through the formula -
L = ✓(Lx cos theta)² + (L sin theta)²
L = ✓(0.243 × cos 34)² + (1 × sin 34)²
L = ✓(0.243 × 0.829)² + (0.559)²
L = ✓(0.039) + 0.312
L = ✓0.351
L = 0.59 meter
Hence, the length of meter stick as measured from the frame S is 0.59 meter.
Learn more about frame -
https://brainly.com/question/29851154
#SPJ4
You are given a black box circuit and you are to apply an input vi(t)=3u(t)V. The voltage response can be described by vo(t)=(5e−8t−2e−5t)V for t≥0. What will be the steady-state response of the circuit if you apply another input voltage described by vi(t)=100cos6t V for t≥0 ?
The steady-state response of the circuit to the input voltage vi(t) = 100cos(6t) V is given by vo(t) = 100*cos(6t + φ) V
To determine the steady-state response of the circuit to the input voltage described by vi(t) = 100cos(6t) V, we need to find the response after transient effects have settled. The given voltage response vo(t) = 5e^(-8t) - 2e^(-5t) V is the transient response for the previous input.
To find the steady-state response, we need to find the particular solution that corresponds to the new input. Since the input is a sinusoidal signal, we assume the steady-state response will also be sinusoidal with the same frequency.
1. Find the steady-state response of the circuit for the new input voltage:
We assume the steady-state response will be of the form vp(t) = A*cos(6t + φ), where A is the amplitude and φ is the phase angle to be determined.
2. Apply the new input voltage to the circuit:
vi(t) = 100cos(6t) V
3. Find the output voltage in the steady-state:
vo(t) = vp(t)
4. Substitute the input and output voltages into the equation:
100cos(6t) = A*cos(6t + φ)
5. Compare the coefficients of the same terms on both sides of the equation:
100 = A (since the cos(6t) terms are equal)
6. Solve for the amplitude A:
A = 100
7. The steady-state response of the circuit for the new input voltage is:
vo(t) = 100*cos(6t + φ) V
Therefore, the steady-state response of the circuit to the input voltage vi(t) = 100cos(6t) V is given by vo(t) = 100*cos(6t + φ) V, where φ is the phase angle that depends on the initial conditions of the circuit.
To know more about input voltage click here:
https://brainly.com/question/33288767
#SPJ11
Two point charges of 6.96 x 10-9 C are situated in a Cartesian coordinate system. One charge is at the origin while the other is at (0.71, 0) m. What is the magnitude of the net electric field at the location (0, 0.78) m?
Answer: The net electric field at the location `(0, 0.78) m` is approximately `6.69 × 10² N/C` away from the second charge.
The electric field E at a location due to a point charge can be calculated by using Coulomb's law: `E = kq / r²`, where k is Coulomb's constant `8.99 × 10^9 N · m²/C²`, q is the charge and r is the distance from the charge to the point in question.
To find the net electric field at a point due to multiple charges, we need to calculate the electric field at that point due to each charge and then vectorially add those fields. Now, we will find the net electric field at the location (0, 0.78) m.
We know that the Two point charges of `6.96 × 10^-9 C` are situated in a Cartesian coordinate system. One charge is at the origin while the other is at `(0.71, 0)` m. The distance between the first charge and the point of interest is `r1 = 0.78 m` and the distance between the second charge and the point of interest is `r2 = 0.71 m`. The magnitude of the electric field at a distance `r` from a charge `q` is `E = kq/r^2`.
Thus, the magnitude of the electric field due to the first charge is:
E1 = kq1 / r1²
= (8.99 × 10^9) × (6.96 × 10^-9) / (0.78)²
≈ 1.39 × 10^3 N/C.
The direction of this electric field is towards the first charge. The magnitude of the electric field due to the second charge is:
E2 = kq2 / r2²
= (8.99 × 10^9) × (6.96 × 10^-9) / (0.71)²
≈ 2.06 × 10^3 N/C.
The direction of this electric field is away from the second charge. The net electric field is the vector sum of these two fields. Since they are in opposite directions, we can subtract their magnitudes:
E_net = E2 - E1 = 2.06 × 10³ - 1.39 × 10³ ≈ 6.69 × 10² N/C.
The direction of this electric field is the direction of the stronger field, which is away from the second charge.
Therefore, the net electric field at the location `(0, 0.78) m` is approximately `6.69 × 10² N/C` away from the second charge.
Learn more about electric field: https://brainly.com/question/19878202
#SPJ11
Satellite A of mass 48.6 kg is orbiting some planet at distance 1.9 radius of planet from the surface. Satellite B of mass242.9 kg is orbiting the same planet at distance 3.4 radius of planet from the surface. What is the ratio of linear velocities of these satellites v_a/v_b?
The ratio of linear velocities of the two satellites is approximately 1.338. To find the ratio of linear velocities of the two satellites, we can use the concept of circular motion and the law of universal gravitation. The gravitational force acting on a satellite in circular orbit is given by:
F = (G * M * m) / [tex]r^2[/tex]
where F is the gravitational force, G is the gravitational constant, M is the mass of the planet, m is the mass of the satellite, and r is the distance between the satellite and the center of the planet.
In circular motion, the centripetal force required to keep the satellite in orbit is given by:
F = m * [tex](v^2 / r)[/tex]
where v is the linear velocity of the satellite.
Setting these two forces equal to each other, we can cancel out the mass of the satellite:
(G * M * m) /[tex]r^2 = m * (v^2 / r)[/tex]
Simplifying the equation, we find:
[tex]v^2[/tex] = (G * M) / r
Taking the square root of both sides gives us:
v = √[(G * M) / r]
Now, let's calculate the ratio of linear velocities[tex]v_a/v_b:[/tex]
[tex](v_a / v_b[/tex]) = [√((G * M) / [tex]r_a)[/tex]] / [√((G * M) / [tex]r_b[/tex])]
Substituting the given values:
([tex]v_a / v_b)[/tex] = [√((G * M) / (1.9 * R))] / [√((G * M) / (3.4 * R))]
Simplifying further:
([tex]v_a / v_b)[/tex] = √[(3.4 * R) / (1.9 * R)]
([tex]v_a / v_b[/tex]) = √(3.4 / 1.9)
([tex]v_a / v_b[/tex]) = √1.789
([tex]v_a / v_b[/tex]) ≈ 1.338
Therefore, the ratio of linear velocities of the two satellites is approximately 1.338.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A 2.32cm-tall object is placed 5.2 cm in front of a convex mirror with radius of curvafure 21 cm. Part (a) What is the image distance, in centimeters? Include its sign. s’ = ___________
Hints: 0% deduction per hint. Hints remaining : 2 Feedback: 0% deduction per feedback
Part (b) What is the image height, in centimeters? Include its sign.
Part (c) What is the orientation of the image relative to the object?
The image distance is + 2.00 cm and height is - 0.88 cm, inverted image.
Part (a)
Image distance, s′ = ?
We have the object distance (u) = - 5.2 cm
Radius of curvature (R) = + 21 cm (because it is a convex mirror)
We know that the mirror formula is given by:
1/f = 1/v + 1/u
where
f is the focal length of the mirror.
Putting the values of u and R, we get:
1/f = 1/v + 1/R
Since we are not given the focal length, we cannot use the above formula. However, we can use the mirror formula to calculate the image distance which is given as:
s′ = (f * u)/(u + f)s′ = - (R * u)/(u - R) [we know that for a convex mirror, the focal length is negative]
s′ = - (21 * (- 5.2))/(−5.2 − 21)s′ = 2.00 cm
Therefore, the image distance, s′ = + 2.00 cm (since the image is formed on the same side of the mirror as the object, the image distance is positive).
Part (b)
Image height, h′ = ?
The magnification of the image is given by:
- v/u,
where
v is the image distance.
Since the magnification is negative, the image is inverted with respect to the object.
Magnification, m = - v/u = h'/h
where
h' is the image height
h is the object height
Substituting the values, we get:
m = - v/u = h'/h
2.32/h = - 2.00/(- 5.2)
h' = 0.88 cm
The image height, h′ = - 0.88 cm (because the image is inverted)
Part (c)
Orientation of the image relative to the object:
The magnification is negative, which implies that the image is inverted relative to the object.
Learn more about convex mirror:
https://brainly.com/question/31439122
#SPJ11
A cannon fires a cannonball from the ground, where the initial velocity's horizontal component is 6 m/s and the vertical component is 5 m/s. If the cannonball lands on the ground, how far (in meters) does it land from its initial position? Round your answer to the nearest hundredth (0.01).
the cannonball lands 6.12 m (approx) from its initial position.
Initial horizontal velocity = 6 m/s
Initial vertical velocity = 5 m/s
Final vertical velocity = 0 m/s
As the projectile is fired from the ground and lands on the ground, initial height and final height is 0 m. Using the equation of motion we can determine the horizontal displacement of the projectile, which is the distance it has traveled from its initial position.
Distance = average velocity × time
It is a projectile motion and it can be split into two directions: horizontal and vertical. Both directions are independent of each other. Therefore, horizontal velocity remains constant and is 6 m/s throughout the projectile motion. We need to find the time taken for the projectile to land on the ground.
Let’s calculate time of flight.
Time of flight = 2 x t
Where
t is the time taken to reach the maximum height
The formula for calculating the time taken to reach the maximum height is,
Final vertical velocity = initial vertical velocity + gt (g = 9.8 m/s²)
t = (final vertical velocity - initial vertical velocity) / gt= (0 - 5) / -9.8t= 0.51 seconds
Therefore, total time of flight = 2 × 0.51 = 1.02 s
Now we can calculate the horizontal displacement or range using the formula,
Horizontal displacement = Horizontal velocity × time takenRange = 6 × 1.02 = 6.12 meters (approx)
Therefore, the cannonball lands 6.12 m (approx) from its initial position. \
Learn more about velocity:
https://brainly.com/question/25905661
#SPJ11
Determining the value of an unknown capacitor using Wheatstone Bridge and calculating the resistivity of a given wire are among the objectives of this experiment. Select one: True False
The statement is false as neither determining the value of an unknown capacitor using a Wheatstone Bridge nor calculating the resistivity of a given wire are objectives of this experiment.
Determining the value of an unknown capacitor using a Wheatstone Bridge and calculating the resistivity of a given wire are not among the objectives of this experiment. The Wheatstone Bridge is typically used for measuring unknown resistance values, not capacitors. The bridge circuit is specifically designed to measure resistances and can provide accurate results for resistance measurements.
On the other hand, calculating the resistivity of a given wire is a separate experiment that involves measuring the wire's dimensions (length, cross-sectional area) and its resistance. By using these measurements and the formula for resistivity (ρ = RA/L), the resistivity of the wire can be determined. This experiment does not involve the Wheatstone Bridge method.
Learn more about resistivity here:
https://brainly.com/question/29427458
#SPJ11
A rock with a weight of 10N is attached to a vertical string. The rock is moving upward but is slowing down. Shod the force that the string exerts on the rock be greater than 10N, less than 10N, or equal to 10N? Neglect air resistance and explain using the correct Newton's Law.
The force exerted by the string on the rock should be greater than 10N, according to Newton's second law of motion.
Newton's second law of motion states that the net force acting on an object is equal to the product of its mass and acceleration. In this case, the rock is moving upward but slowing down, which means its acceleration is directed downward. Since the rock's weight is 10N, which is equivalent to the force of gravity acting on it, there must be an additional force exerted by the string to counteract this downward acceleration.
To understand this, let's consider the forces acting on the rock. The force of gravity pulls the rock downward with a force of 10N. To slow down the rock's upward motion, the string must exert a force greater than 10N in the upward direction. This additional force exerted by the string balances out the downward force of gravity, resulting in a net force of zero and causing the rock to slow down.
Therefore, the force exerted by the string on the rock should be greater than 10N to counteract the force of gravity and slow down the rock's upward motion.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
What is the magnetic field at the center of a single (N=1 turn) circular loop of wire or radius 10 cm carrying a current of 2.5 A ? 2.41×10 −4
T 5.0×10 −6
T 1.57×10 −7
T 3.14×10 −5
T
The magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A is 3.14 × 10-5 T.
Magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A can be calculated using the formula;
B=μ0I/2R
where B is the magnetic field, I is the current flowing, R is the radius of the loop and μ0 is the permeability of free space.The given values are;I = 2.5 AR = 10 cm = 0.1 mμ0 = 4π × 10-7 T m/A.
Substitute the values into the formula; B = μ0I/2R = (4π × 10-7 T m/A) × (2.5 A)/2(0.1 m)= 3.14 × 10-5 T
Therefore, the magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A is 3.14 × 10-5 T.
Answer: 3.14×10^−5T.
Know more about Magnetic field here,
https://brainly.com/question/14848188
#SPJ11
Imagine that the north pole of a magnet is being pushed through a coil of wire. Answer the following questions based on this situation. a) As the magnet approaches the coil, is the flux through the coil increasing or decreasing? Increasing b) On the diagram below, indicate the direction of induced current in the coil as the magnet approaches. (up or down?) c) What happens to the induced current as the midpoint of the magnet passes through the center of the coil? Why? d) As the magnet moves on through the coil, so that the south pole of the magnet is approaching the coil, is the flux through the coil increasing or decreasing? ) The magnet continues on through the coil. What happens to the induced current in the coil as the south pole of the magnet passes through the coil and moves away? On the diagram, show the direction of the induced current in the coil as the south pole of the magnet moves away from the coil. f) A bar magnet is held vertically above a horizontal coil, its south pole closest to the coil as seen in the diagram below. Using the results of parts (a−e) of this question, describe the current that would be induced in the coil when the magnet is released from rest and' allowed to fall through the coil.
a) As a magnet approaches a coil with its north pole first, the magnetic flux through the coil increases.
What happens to the induced currentb) The induced current in the coil due to this increasing flux flows in a direction that creates a magnetic field with its north pole facing the approaching magnet, according to Lenz's law.
c) The induced current decreases and becomes zero as the midpoint of the magnet passes through the coil's center due to the rate of change of magnetic flux dropping to zero.
d) When the magnet's south pole starts to approach the coil, the magnetic flux begins to decrease due to the opposing magnetic field direction.
e) As the magnet's south pole passes through and moves away from the coil, the flux continues to decrease, inducing a current that generates a magnetic field with a south pole facing the retreating magnet.
f) When a bar magnet is released above a coil with the south pole closest to the coil, the events described above occur in reverse order: the south pole induces a current as it approaches, and the north pole induces a current as it retreats
Read more on magnet here https://brainly.com/question/14997726
#SPJ4
A hand move irrigation system is designed to apply 3.9 inches of water with a DU=0.61. ET = 0.19 in/day. Pl losses and runoff are both zero. If irrigation occurs 3 days AFTER the perfect timing day, what is the total deep percolation (in)? Assume that 25% of the area is under irrigated.
To calculate the total deep percolation, Consider the effective rainfall, which takes into account the depletion of soil moisture. The formula for effective rainfall is: Effective rainfall = DU * (ET - P)
Effective rainfall = 0.61 * (0.19 in/day) = 0.1159 in/day
Since irrigation occurs 3 days after the perfect timing day, the total effective rainfall for those 3 days is:
Total effective rainfall = 3 days * 0.1159 in/day = 0.3477 inches
Assuming 25% of the area is under irrigation, we can calculate the total deep percolate:
Total deep percolate = 0.25 * 3.9 inches = 0.975 inches
Therefore, the total deep percolation from the irrigation system is 0.975 inches.
Percolate refers to the process by which a liquid or gas slowly filters through a porous material or substance. It involves the movement of the fluid through interconnected spaces or channels within the material, allowing for the extraction of soluble components or the passage of substances.
Learn more about percolate here:
https://brainly.com/question/29246929
#SPJ11