a sinusoidal wave can be described by a cosine function, which is negative just as often as positive. so why isn't the average power delivered by this wave zero?

To determine the magnitude and direction of the magnetic field produced by a current-carrying wire in Investigation 1, you can use Ampère's Law and the right-hand rule. Ampère's Law relates the magnetic field around a closed loop to the electric current passing through that loop.

In the case of a straight wire, the magnetic field forms concentric circles around the wire, with the field's strength decreasing as you move farther from the wire.

To calculate the magnitude of the magnetic field, you can use the formula B = (μ₀ * I) / (2 * π * r), where B represents the magnetic field strength, μ₀ is the permeability of free space (4π x 10⁻⁷ Tm/A), I is the current through the wire, and r is the distance from the wire to the point where the magnetic field is being measured.

For determining the direction of the magnetic field, you can use the right-hand rule. If you point your thumb in the direction of the current and curl your fingers, your fingers will wrap around the wire in the direction of the magnetic field. This means that if the current flows upward, the magnetic field will rotate clockwise around the wire when viewed from above.

For more such questions on  magnetic field, click on:

https://brainly.com/question/26257705

#SPJ11

Answer:

Q is quantity of electric charge (in Coulombs)

Explanation:

Q= W/V

If one object's mass is reduced by a factor of 2, the new force of gravity between the two will be 5 N.

The square of the distance between two things has an inverse relationship with the force of gravity, which depends directly on the masses of the two items. This translates to an increase in gravity force with mass but a decrease in gravity force with increasing distance between objects.

The force of gravity between two items will be as follows if the mass of one object is reduced by a factor of two:

F = (G * m1 * m2) / r²

Assume that object 1's mass is reduced by a factor of 2. This indicates that object 1's new mass is m1/2.

As a result, the new gravitational force between the two objects will be:

F' = (G * (m1/2) * m2) / r²

By combining the two masses, we can make this equation simpler:

F' = (G * m1 * m2) / (2 * r²)

Now, we can see that the new gravitational force is half that of the old one.

F' = 10 N / 2 = 5 N

To know more about gravity visit:-

https://brainly.com/question/31321801

#SPJ1

The new force of gravity between the two objects is 5 N.

The force of gravity, also known as gravitational force, is the force that attracts two objects with mass towards each other. It is one of the fundamental forces of the universe, and it is the force that governs the motion of planets, stars, and galaxies.

The force of gravity is described mathematically by Newton's law of gravitation, which states that the force of gravity between two objects is equal to the product of their masses, divided by the square of the distance between them, multiplied by a constant known as the gravitational constant.

The force of gravity between two objects is given by the formula:

F = G * (m1 * m2) / r^2

where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

In this problem, we are told that the force of gravity between two objects is 10 N. We can assume that the distance between the objects remains the same.

If the mass of one object is decreased by a factor of 2, then the new mass will be half of the original mass. Let's call the original masses m1 and m2, and the new masses m1' and m2'. We can write:

m1' = m1 / 2

m2' = m2

The force of gravity between the two objects with the new masses will be:

F' = G * (m1' * m2') / r^2

= G * (m1/2 * m2) / r^2

= (1/2) * G * (m1 * m2) / r^2

= (1/2) * 10 N

= 5 N

Therefore, the new force of gravity between the two objects is 5 N.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

We have demonstrated that when the transformer's input voltage is raised from 9 V to 12 V, the transformer's output voltage rises from 36 V to 48 V.

If you are uncertain of the input voltage, you can check it by connecting the ground terminal of a volt metre to the transformer's ground and touching the positive terminal of the volt metre to the positive wire entering the transformer.

Vp/Vs = Np/Ns

Vp = 9 V

Vs = 36 V

Np/Ns = Vs/Vp = 36/9 = 4

Vp = 12 V

Np/Ns = 4 (from above)

Ns = Np/4 = (1/4)Np

Vs = Vp(Ns/Np) = 12((1/4)Np)/Np = 3V

2(3 V) = 6 V

To know more about transformer's  visit:-

https://brainly.com/question/1674819

#SPJ1

The Resolution of a system refers to the smallest change in the input signal that the system can detect. The resolution of a system is determined by the number of bits used to represent the input signal.

The more bits used, the higher the resolution of the system.The resolution of a system can be calculated using the following formula:Resolution = Full scale range/2^nwhere n is the number of bits used to represent the input signal. The full-scale range is the maximum value that the input signal can take on. In this case, the full-scale range is 5 V.

As a result, the resolution of the system is:Resolution = 5 V/2^10Resolution = 0.0048828125 VQuantization errorThe quantization error is the difference between the actual input signal and the closest representable value.

The quantization error is caused by the limited resolution of the system. The quantization error can be calculated using the following formula:Quantization error = (Full scale range/2^n)/2where n is the number of bits used to represent the input signal.

The full-scale range is the maximum value that the input signal can take on.In this case, the quantization error is:Quantization error = (5 V/2^10)/2Quantization error = 0.00244140625 VTo convert this value to millivolts, we need to multiply by 1000:Quantization error = 0.00244140625 V x 1000Quantization error = 2.44 mVTherefore, the overall resolution of the system is 0.0048828125 V, and the quantization error is 2.44 mV to 3 significant digits.

To Learn More About Resolution

https://brainly.com/question/15165518

#SPJ11

The universe is made up of thousands of galaxies. This is because the universe is an incredibly vast expanse of space that contains billions of galaxies, including our own Milky Way galaxy.

A galaxy is a collection of stars, stellar remains, interstellar gas, dust, and dark matter that are gravitationally linked together. the Solar System's home galaxy, the Milky Way. Galaxies vary in size from dwarfs with fewer than 100 million stars to the largest known galaxies, supergiants with one hundred trillion stars orbiting their galaxy's centre of mass. Galaxies are thought to contain an average of 100 million stars.

Only a small percentage of the mass in a typical galaxy is visible in the shape of stars and nebulae; the majority of the galaxy's mass is dark matter. Supermassive black holes are a typical component of galaxy cores.

Each galaxy contains billions of stars, and many of those stars likely have planets orbiting them. The universe is also home to countless other celestial bodies, including black holes, comets, asteroids, and more. Overall, the universe is a fascinating and mysterious place that continues to captivate scientists and astronomers alike.

For more such questions on universe , Visit:

https://brainly.com/question/28365362

#SPJ11

48. [C] 5.00 Ω Reactance is the resistance that a capacitor and an inductor provide to an AC current in a circuit.

49. [A] 5.00 Ω, 50. [D] 46.00 A

The opposition caused by capacitance and inductance in an AC circuit is known as reactance. The resistance that the current and voltage experience in an AC circuit is known as the impedance in a circuit.

The measure of resistance to current that a circuit offers each time a voltage is applied is called AC impedance. It is the proportion of voltage to current in alternating current in a more quantitative sense. Impedance can be expanded to include phase and magnitude and incorporate the concept of AC circuit resistance.

Reactance of the circuit,

Z = R + Xc

Z = 5 + 1/2ΠC

Z = 5 + 1/2Π×40

Z = 5.00Ω

Current in the circuit,

Z = V/I

5.00 = 230/I

I = 46 A

To know more about the reactance visit:

https://brainly.com/question/4425414

#SPJ1

If a bat emits a chirp at a frequency of 60.0 khz and the speed of sound waves in air is 340 m/s, the size in millimeters of the smallest insect that the bat can detect is 2.84 mm.

The size in millimeters of the smallest insect that a bat can detect can be determined using the equation:

d = λ / (2 × sinθ)

where d is the size of the object, λ is the wavelength of the sound, and θ is the angle between the incoming sound and the reflected sound.

To find the size of the smallest insect that a bat can detect when emitting a chirp at a frequency of 60.0 kHz, the wavelength of the sound must first be calculated.

The wavelength of sound can be calculated using the formula:

λ = v/f

where λ is the wavelength of the sound, v is the speed of sound waves in air, and f is the frequency of the sound.

Substituting the given values, we get:

λ = (340 m/s)/(60,000 Hz)

λ = 0.00567 m

Next, the angle between the incoming sound and the reflected sound must be determined.

For the smallest insect, the angle is 90 degrees.

Substituting the values into the equation:

d = λ / (2 × sinθ)

d = 0.00567 m / (2 × sin90)

d = 0.00567 m / 2

d = 0.00284 m or 2.84 mm

Therefore, the size in millimeters of the smallest insect that the bat can detect is 2.84 mm.

For more such questions on frequency, click on:

https://brainly.com/question/27151918

#SPJ11

The magnetic flux through the surface is 0.5 webers.

The magnetic flux through a surface is given by:

Φ = BAcos(θ)

Where:

Φ is the magnetic flux through the surface in webers (Wb)

B is the magnetic field strength in tesla (T)

A is the area of the surface in square meters (m^2)

θ is the angle between the magnetic field and the normal to the surface (in this case, we assume θ = 0)

Using the given values, we have:

B = 2 T

A = 0.25 m^2

θ = 0

Substituting these values into the formula, we get:

Φ = (2 T) * (0.25 m^2) * cos(0)

Φ = 0.5 Wb

Therefore, the magnetic flux through the surface is 0.5 webers.

For such more question on magnetic flux:

https://brainly.com/question/16234377

#SPJ11

When wiring in a Sunny Boy 3000 US inverter, it must be tied to the AC circuit breaker.

The AC circuit breaker is a safety device that is used to protect the electrical wiring and appliances in a building from overcurrents and short circuits. It is typically installed in the main electrical panel or subpanels and is used to control the flow of electricity to specific circuits.

In the case of a Sunny Boy 3000 US inverter, the AC circuit breaker is used to connect the inverter to the building's electrical system and to control the flow of AC power from the inverter to the building's electrical loads.

It is important to follow the manufacturer's instructions and local electrical codes when installing and wiring the inverter to ensure safe and reliable operation.

To learn more about AC circuit breaker here:

https://brainly.com/question/17040163

#SPJ11

The time rate of increase of pressure in the reservoir at this instant is approximately 9.56 Pa/s.

To calculate the time rate of increase of pressure in the reservoir, we can use the Ideal Gas Law:
PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. We can rearrange this equation to find n:
n = PV / RT

Since air is being pumped into the reservoir at a rate of 1 kg/s, we can convert this mass flow rate to a molar flow rate using the molar mass of air (M_air = 28.97 g/mol or 0.02897 kg/mol):

Molar flow rate = mass flow rate / molar mass

Molar flow rate = 1 kg/s / 0.02897 kg/mol

Molar flow rate ≈ 34.51 mol/s

Now, we can find the time rate of increase of moles in the reservoir:
dn/dt = 34.51 mol/s

Next, let's differentiate the Ideal Gas Law with respect to time:
d(PV)/dt = R * d(nT)/dt
Since V and T are constants, we get:
dP/dt = R * dn/dt / V

Substituting the values:
dP/dt = (8.314 J/mol*K) * (34.51 mol/s) / (30 m³)
dP/dt ≈ 9.56 Pa/s
At this instant, the time rate of increase of pressure in the reservoir is approximately 9.56 Pa/s.

For more such questions on pressure, click on:

https://brainly.com/question/29321317

#SPJ11

If the baseball is hit back the opposite direction at 95m/s after hitting the very end of the bat, the final angular velocity of the bat is 28.89 rad/s.

Since the baseball hits the very end of the bat, we have:

r = 0.75 m

θ = π/2 (since the momentum vector is perpendicular to the bat)

L₂ = 0.75 m * 13 kgm/s * sin(π/2) = 9.75 kgm²/s

Finally, we can solve for the final angular velocity of the bat:

L₃ = I * ω₃

ω₃ = L₃ / I = (L₁ + L₂) / I

Substituting the values we found earlier:

ω₃ = (0 + 9.75 kgm²/s) / 0.3375 kgm²

ω₃ = 28.89 rad/s

Angular velocity is the rate at which angular displacement changes in relation to time. Angular displacement is the angle through which an object rotates in a given amount of time. The unit of angular velocity is radians per second (rad/s) or degrees per second (°/s). The angular velocity vector has a direction that is right-handed and perpendicular to the plane of rotation.

Angular velocity is an important concept in physics and engineering, particularly in the study of rotational motion. It is used to describe the motion of objects such as wheels, gears, and turbines. The angular velocity of an object can be changed by applying a torque or by changing the moment of inertia of the object.

To learn more about Angular velocity visit here:

brainly.com/question/30885221

#SPJ4

The equivalent resistor for R1 and R2 connected in parallel is (R1 x R2) / (R1 + R2).

An electronic component called a resistor is used to restrict the amount of electrical current that may travel through a circuit. As a passive component, it opposes the flow of electrical current rather than producing any energy. A substance with a high resistance to the passage of electricity, such as metal or carbon, is often used to make resistors.

The equivalent resistor for two resistors R1 and R2 connected in parallel is given by:

1/R' = 1/R1 + 1/R2

where R' is the equivalent resistance of the two resistors.

Therefore,

R' = (R1 x R2) / (R1 + R2)

Therefore, the equivalent resistor for R1 and R2 connected in parallel is (R1 x R2) / (R1 + R2).

To learn more about resistors, refer to:

https://brainly.com/question/29231593

#SPJ4

Based on the given right ascension separation of 7 hours 25 minutes, the moon is in its Waxing Gibbous phase.

Step 1: Convert time to degrees
The right ascension is expressed in hours and minutes, but we need to convert it to degrees. There are 24 hours in a full circle, so each hour corresponds to 15 degrees (360 degrees / 24 hours = 15 degrees per hour). To convert 7 hours to degrees, multiply 7 by 15: 7 hours * 15 degrees/hour = 105 degrees.

For the 25 minutes, there are 60 minutes in an hour, so the fraction is 25/60, which is approximately 0.4167. Multiply this fraction by 15 degrees: 0.4167 * 15 degrees = 6.25 degrees. Adding both values, we have 105 + 6.25 = 111.25 degrees.

Step 2: Locate the angle on the graph
Now that we have the sun-earth-moon angle of 111.25 degrees, find this value on the horizontal axis of the graph.

Step 3: Find the moon's illumination
At the 111.25 degrees point on the graph, check the corresponding value on the vertical axis for the moon's illumination. This value should be around 76%.

Step 4: Identify the moon phase
With the illumination value of approximately 76%, we can conclude that the moon is in its Waxing Gibbous phase. This phase occurs when the moon's illumination is between 50% and 100%, and it is increasing, moving towards the Full Moon phase. Therefore, the moon is in its Waxing Gibbous phase after 7 hours 25 minutes of right ascension from the sun.

Know more about right ascension here:

https://brainly.com/question/29240042

#SPJ11

The key to experimental research is 1.)being able to duplicate the research.

The key feature of experimental research is the ability to manipulate independent variable and observe its effect on dependent variable while controlling for other factors. Therefore, option 1)being able to duplicate the research is the most accurate answer as replication is an important part of experimental research to ensure that findings are valid and reliable.

Option 2)getting the research to pass Internal Review Board is not specific to experimental research, but rather a requirement for conducting research with human participants. Option 3)the survey is not specific to experimental research and may be used in other types of quantitative research. Therefore, option 4)all answers are correct is not accurate.

To know more about experimental research, refer

https://brainly.com/question/17009178

#SPJ1

To find the equivalent resistance, we can use two ways:

1. To find the equivalent resistance of a circuit, we need to know the resistances of all the individual resistors and how they are connected. There are several methods for finding the equivalent resistance depending on the circuit configuration.

Here are some common circuit configurations and their equivalent resistance formulas:

Resistors connected in series have an equivalent resistance that is equal to the total of their individual resistances.

Req = R1 + R2 + R3 + ...

Resistors in parallel: The equivalent resistance of resistors connected in parallel can be calculated using the formula:

1/Req = 1/R1 + 1/R2 + 1/R3 + ...

Combination of series and parallel resistors: For circuits with a combination of series and parallel resistors, we can use a combination of the above formulas to find the equivalent resistance.

First, we can simplify the series resistors and replace them with their equivalent resistance (sum of individual resistances). Then, we can simplify the parallel resistors by replacing them with their equivalent resistance (1/sum of individual resistances).

Finally, we can add up all the equivalent resistances to find the total equivalent resistance of the circuit.

2. To find the equivalent resistance of a circuit, we need to use Ohm's Law and Kirchhoff's Laws. First, calculate the resistance of each individual resistor in the circuit. Then, use Kirchhoff's Laws to determine the total current and voltage in the circuit. Finally, use Ohm's Law to calculate the equivalent resistance by dividing the total voltage by the total current.

For more questions on: circuit

https://brainly.com/question/2969220

#SPJ11

The maximum current in a straight, 3.00-mm-diameter superconducting niobium wire is approximately 428,000 amperes.

The maximum current in a straight, 3.00-mm-diameter superconducting niobium wire is given by the formula: I = K(πr2), where I is the maximum current, K is a constant, r is the radius of the wire, and π is a mathematical constant equal to 3.1416.

What is a superconductor?A superconductor is a material that can carry electrical current without resistance or energy loss. This implies that the current may flow indefinitely without being depleted, and it also means that no energy is released as heat.

This phenomenon occurs at very low temperatures, typically below -100 °C. The capacity of a superconductor is determined by the critical current density, which is the maximum current that a superconductor can carry without losing its superconducting properties.

A 3.00-mm-diameter superconducting niobium wire has a radius of 1.5 mm. K can be found by utilizing the critical current density of the niobium wire. If we assume that the critical current density of niobium is 4.0 × 106 A/m2, K can be calculated as follows:

K = Jc/πr2 = (4.0 × 106 A/m2) / [π × (1.5 × 10-3 m)2] = 6.03 × 109 A/mI = K(πr2) = (6.03 × 109 A/m) × [π × (1.5 × 10-3 m)2] = 4.28 × 105 AThe maximum current in a straight, 3.00-mm-diameter superconducting niobium wire is approximately 428,000 amperes.

To learn more about :  current

https://brainly.com/question/1100341

#SPJ11

The number of grains per square inch must be counted and compared to a standard chart to get the ASTM grain size number of a metal from a photomicrograph.

The figure depicts the quantity of grains per square inch associated with various ASTM grain size values. With a magnification of 200x, the photomicrograph reveals 60 grains per square inch. The magnification must be translated to a linear scale before the ASTM grain size number can be calculated. One inch on the photomicrograph equals 1/200 inch in real life at 200x magnification. The number of grains per square inch may be translated to the number of grains per square millimeter using this scale, which is then compared to the ASTM grain size table. The equivalent The ASTM grain size number may then be calculated. It is impossible to provide an ASTM grain size number for the metal without knowing the linear dimension of the grains in the photomicrograph.

learn more about photomicrograph   here:

https://brainly.com/question/29903660

#SPJ4

When an object is placed at 20.6 cm to the left of a converging lens with focal length 11.9, the distance between the object and the image is approximately 7.57 cm. This can be found by finding the image distance.

To find the distance between the object and the image, we need to first determine the image distance using the lens formula. The lens formula is given by:

1/f = 1/do + 1/di

Where:
- f is the focal length of the lens (11.9 cm)
- do is the object distance (20.6 cm)
- di is the image distance, which we need to find.

Step 1: Plug in the given values into the lens formula:

1/11.9 = 1/20.6 + 1/di

Step 2: Find a common denominator for the fractions:

(20.6*di) / (11.9*20.6) = (11.9*di) / (11.9*20.6) + (20.6*11.9) / (11.9*20.6)

Step 3: Simplify the equation:

(20.6*di) / 246.14 = (11.9*di + 245.14) / 246.14

Step 4: Cross-multiply and solve for di:

20.6*di = 11.9*di + 245.14

Step 5: Subtract 11.9*di from both sides of the equation:

8.7*di = 245.14

Step 6: Divide both sides by 8.7 to isolate di:

di ≈ 28.17 cm

Now that we have the image distance, we can find the distance between the object and the image.
Distance = |object distance - image distance|
Distance = |20.6 cm - 28.17 cm|
Distance ≈ 7.57 cm

Know more about image distance here:

https://brainly.com/question/12629638

#SPJ11

The average speed is larger because the distance is greater than the magnitude of the displacement. Option 1 is correct.

Average speed is defined as the total distance traveled divided by the total time taken. For a car moving forward and then to the right, the total distance traveled is the sum of the distance traveled in both directions. On the other hand, average velocity is defined as the displacement divided by the time taken, where the displacement is the straight-line distance between the starting and ending points.

In this case, the displacement is less than the total distance traveled because it only considers the straight-line distance between the starting and ending points. Therefore, the magnitude of the displacement is smaller than the total distance traveled, and the average speed is larger than the average velocity.

To know more about speed, here

brainly.com/question/15744110

#SPJ4

--The complete question is, For a car moving forward and then to the right, how does average speed compare to the average velocity.

1. The average speed is larger because the distance is greater than the magnitude of the displacement.

2. The average velocity is larger because the magnitude of the displacement is greater than the distance.

3. They are equal because the time is the same for both.

4. The average speed is larger because the magnitude of the displacement is larger than the distance.--

The results of the race between objects with the same shape but different radii and mass can be explained by the relationship between force, mass, and acceleration as described by Newton's second law of motion.

Assuming that the objects have the same starting point and are released from rest, the results of the race between objects with the same shape but different radii and mass can be explained by the laws of motion, specifically Newton's second law of motion.

Newton's second law of motion states that the acceleration of an object will be directly proportional to the force applied to it, and inversely proportional to its mass. This means that the object with a smaller mass will experience a greater acceleration than the object with a larger mass when the same force is applied.

In the case of objects with the same shape but different radii, assuming that the density of the objects is the same, the object with the smaller radius will have a smaller mass than the object with the larger radius.

Therefore, when the same force is applied to both objects, the object with the smaller radius will experience a greater acceleration and will be able to move faster than the object with the larger radius.

To know more about Newton's second law of motion here

https://brainly.com/question/13447525

#SPJ4

The force constant of the spring should be approximately 250 N/m to achieve 5 oscillations per second with a mass of 1.6 g.

To find the force constant of the spring, we can use the formula for the frequency of oscillations of a mass-spring system:
f = (1/2π) * √(k/m)

where f is the frequency in oscillations per second (Hz), k is the force constant of the spring (N/m), and m is the mass (kg).
First, let's convert the mass from grams to kilograms:
m = 1.6 g = 0.0016 kg
We are given that the frequency of oscillations should be 5 Hz. Now, we can rearrange the formula to solve for k:
k = (2π * f)^2 * m
Now, plug in the values for f and m:
k = (2π * 5)^2 * 0.0016
Calculate the value:
k ≈ 250 N/m
So, the force constant of the spring should be approximately 250 N/m to achieve 5 oscillations per second with a mass of 1.6 g.

For more such questions on force , Visit:

https://brainly.com/question/8119756

#SPJ11

The 0.29 kg mass must be placed at the 0.972 cm mark to balance the 0.14 kg mass.

Suppose that a meter stick is balanced at its center.

A 0.14 kg mass is then positioned at the 2-cm mark.

To balance the 0.14 kg mass, the following steps need to be taken.

Find the torque produced by the 0.14 kg mass on the meter stick.

Torque = force x perpendicular distance from the pivot

Torque = 0.14 kg x 9.81 m/s^2 x 0.02 m

Torque = 0.02772 Nm

The torque produced by the 0.29 kg mass must balance the torque produced by the 0.14 kg mass.

Torque produced by 0.29 kg

mass = 0.02772 Nm

Torque produced by 0.29 kg

mass = force x perpendicular distance from the pivot

Let the distance of the 0.29 kg mass from the pivot be x cm.

Then,0.02772 Nm = 0.29 kg x 9.81 m/s^2 x (x/100) m0.02772 = 2.8479x/10000x = 0.972 cm

For similar question on mark to balance

https://brainly.com/question/31158995

#SPJ11

Answer is...:

A. Range

a) The angle for the first order diffraction of shortest wavelength is 36.79° and the angle for the first order diffraction of longest wavelength is undefined.

b) The distance of violet light yv is 1.875 and the distance of yr is not defined.

The angle for the first order diffraction is calculated as follows,

d sinθ = mλ

sinθ = mλ/d

For shortest wavelength (λ = 400 nm)

d = 1/15,000 lines/cm

d = 0.00006667 × 10⁻² = 0.0000006667 = 6.67 × 10⁻⁷ m/lines

sinθ = (1 × 400 × 10⁻⁹)/(6.67 × 10⁻⁷) = (400× 10⁻²/6.67) = 4/6.67 = 0.599

sinθ = 0.599  

θ = sin⁻¹(0.599)

θ = 36.79°

For longest wavelength, (λ = 750 nm)

sinθ = (1 × 750 × 10⁻⁹)/(6.67 × 10⁻⁷)

sinθ = (750 × 10⁻²)/6.67

θ = sin⁻¹(1.12)

θ = undefined

b) The distances on the screen are labelled as yv and yr.

where, yv is distance of violet light

yr is distance of red light

yv is given by the formula, yv = x tan θv = 2.5 tan36.79° = 2.5(0.75) = 1.875

yr is not defined as the angle is not defined.

To know more about wavelengths:

https://brainly.com/question/27856547

#SPJ4

a) The net momentum of the two athletes is 160.5 kg·m/s to the right

b)  their total kinetic energy is 759.56 J.


(a) To find the net momentum, we'll first calculate the momentum of each athlete individually:

Momentum = mass × velocity
Momentum₁ = 110 kg × 2.75 m/s = 302.5 kg·m/s (right)
Momentum₂ = 125 kg × 2.60 m/s = -325 kg·m/s (left, since it's in the opposite direction)

Net momentum = Momentum₁ + Momentum₂ = 302.5 - 325 = -22.5 kg·m/s (left)

Since the net momentum is negative, it's actually to the right, so the magnitude is 160.5 kg·m/s to the right.

(b) To find the total kinetic energy, we'll use the formula:

Kinetic energy = 0.5 × mass × velocity²
KE₁ = 0.5 × 110 kg × (2.75 m/s)² = 414.56 J
KE₂ = 0.5 × 125 kg × (2.60 m/s)² = 845 J

Total kinetic energy = KE₁ + KE₂ = 414.56 + 845 = 759.56 J

To know more about Kinetic energy click on below link:

https://brainly.com/question/26472013#

#SPJ11

Answer:

In 1945, the United Nations created the Universal Declaration of Human Rights (UDHR), which is a milestone document that outlines the fundamental human rights to be universally protected. The UDHR includes 30 articles that cover a wide range of rights, such as the right to life, liberty and security, freedom of speech and religion, and the right to education and work. The UDHR has been translated into over 500 languages and has served as the basis for the development of many national and international human rights laws and conventions.

Answer:

The given chart shows that the four solutions (W, X, Y, Z) were subjected to different treatments (high pressure, low temperature, high temperature, low pressure). However, the chart does not provide any information about the solubility of the solutions.

Therefore, none of the options accurately describes the solutions based on the information provided.

Answer:

It is C: Solutions W and Y have greater solubility than solutions X and Z.

Explanation:

just took test

Answer:

approximately 1.248 x 10^18 electrons pass through the cross-sectional area of the wire per second

Explanation:

To determine the number of electrons passing through the cross-sectional area of a wire per second, we need to use the formula:

I = q/t

where I is the current in amperes (A), q is the charge in coulombs (C), and t is the time in seconds (s).

We can rearrange this formula to solve for q:

q = I x t

We know that the wire carries a current of 0.2 A, which means that 0.2 coulombs of charge pass through the wire every second. However, we want to know how many electrons are passing through the wire per second.

To convert from coulombs to electrons, we need to use the fact that 1 coulomb is equal to 6.24 x 10^18 electrons. Therefore, the number of electrons passing through the cross-sectional area of the wire per second is:

q (in electrons) = 0.2 A x 1 s x 6.24 x 10^18 electrons/C

q (in electrons) = 1.248 x 10^18 electrons/s

The number of electrons passing through the cross-sectional area of a wire per second carrying a 0.2 amp current is approximately 1.25 x 10¹⁸ electrons.

To find how many electrons pass through a wire per second with a 0.2 amp current, we can use the formula: Number of electrons = Current (I) / Elementary charge (e). The elementary charge is approximately 1.6 x 10⁻¹⁹ coulombs.


1. Identify the given current (I) as 0.2 amps.

2. Recall the elementary charge (e), which is approximately 1.6 x 10⁻¹⁹ coulombs.

3. Use the formula: Number of electrons = Current (I) / Elementary charge (e).

4. Plug in the values: Number of electrons = 0.2 amps / (1.6 x 10⁻¹⁹ coulombs).

5. Calculate the result: Number of electrons ≈ 1.25 x 10¹⁸ electrons.

To know more about Elementary charge click on below link:

https://brainly.com/question/3985120#

#SPJ11

Answer:

A crossroads of trade is a place where many trade routes converge, often leading to the exchange of goods and ideas between different cultures. Historically, cities and towns located at crossroads of trade have been important centers of commerce and cultural exchange. For example, the ancient city of Alexandria in Egypt was a crossroads of trade between Europe, Africa, and Asia, and played a key role in the exchange of goods and ideas between these regions. In modern times, cities such as Dubai and Singapore have become important crossroads of trade due to their strategic location and well-developed infrastructure for transportation and logistics.