The work required to reduce the velocity of the truck from 21.0 m/s to 15.0 m/s on a level road is [tex]3.10 * 10^5 J.[/tex]
What is work?
Work is defined as the measure of energy that is transferred to or from an object through an external force. Work is a scalar quantity that has only magnitude and no direction. The symbol for work is W, and its unit of measurement is Joule (J).
Formula to calculate work:
W = Fdcosθ
where W is work done, F is the force applied is the displacement, cosθ is the angle between the force and the displacement.
The work done in slowing down the truck is given by the difference between the kinetic energy before and after the truck is slowed down.
W = KEi - KEf = 0.5 * [tex]mvf^2 - 0.5 * mvi^2[/tex]
where KEi is the initial kinetic energy KE, f is the final kinetic energy, m is the mass of the truck, v is the final velocity of the truck, vi is the initial velocity of the truck.
Calculation of work done
Initial Kinetic Energy (KEi)
[tex]= 0.5 * mvi^2= 0.5 * 2135 * 21^2= 2.16 * 10^6 J[/tex]
Final Kinetic Energy (KEf)
[tex]= 0.5 * mvf^2\\= 0.5 * 2135 * 15^2\\= 1.18 * 10^6 J[/tex]
Work Done = KEi - KEf
[tex]= 2.16 * 10^6 - 1.18 * 10^6\\= 0.98 * 10^6 \\ =9.8 * 10^5 J\\= 3.10 * 10^5 J (approximate)[/tex]
Hence, the work required to decrease the speed of the vehicle from 21.0 m/s to 15.0 m/s on a level road is [tex]3.10 * 10^5 J[/tex].
Learn more about work here:
https://brainly.com/question/30463790#
#SPJ11
consider a binary system containing two stars: one with an apparent magnitude of 12.5 and the other with an apparent magnitude of 12.9. what is the combined magnitude of the two stars?
The combined magnitude of the two stars is 12.14.
The combined magnitude of the two stars is 12.14. What is a binary system? A binary system is a star system consisting of two stars that orbit one another around their mutual center of gravity. Astronomers believe that most stars are part of a binary or multiple star system. As a result, the Sun is most likely a binary star, though no companion star has been detected or recognized. How to calculate the combined magnitude of the two stars?. The formula to calculate the combined magnitude of the two stars is: m= -2.5log10(I1 + I2) + C Where, m = MagnitudeI1, I2 = Intensities of the stars C = Constant The combined magnitude of the two stars is given as: m = -2.5log10(2.512(-12.5) + 2.512(-12.9)) + C For C = 0, the answer is calculated as: m = -2.5log10(2.512(-12.5) + 2.512(-12.9))m = -2.5 * (-12.14)m = 30.35Therefore, the combined magnitude of the two stars is 12.14.
Learn more about Combined Magnitude
brainly.com/question/30588646
#SPJ11
how is em energy like a wave? like a particle? what model accounts for both of these characteristics?
EM energy is like a wave as well as a particle. The concept of wave-particle duality is accounted for in the Quantum Mechanical model.
How is EM energy like a wave?
EM energy is like a wave in a way that it travels from one place to another. This travel is similar to the waves found in a water body that travel from one place to another.
In other words, it travels as a disturbance in a medium or even vacuum that doesn’t need a medium.
In addition, EM waves have features of waves like diffraction, reflection, and interference.
How is EM energy like a particle?
EM energy is also like a particle as it can also act like a particle. An example of this is the photon. Photons are energy particles that have wave-particle duality.
These particles can have particle-like behavior such as being emitted from a source, hitting a target, and interacting with the environment like other particles.
Thus, they act like a wave as well as a particle.
What model accounts for both of these characteristics? The Quantum Mechanical model accounts for both these characteristics, the wave-like and particle-like behavior of EM energy.
It explains that the energy of EM waves is quantized and its energy comes in packets known as photons. These photons can act as particles as well as waves in different situations.
The wave-particle duality is thus accounted for in the Quantum Mechanical model.
To know more about Quantum Mechanical model, refer here:
https://brainly.com/question/11852353#
#SPJ4
The lens and mirror equation is the same for both lenses and mirrors except that it uses a positive focal length for lenses and a negative focal length for mirrors.
O True
O False
Answer:
False, Other guy is wrong
Explanation:
The equation is not the same
An object in free fall is accelerating downwards, so its velocity is continually increasing. Because of this, its momentum is continually increasing as well, apparently contradicting the principle of conservation of momentum. Which of Newton's laws can we use to show that momentum is actually being conserved for an appropriately defined system?
Momentum may be demonstrated to be conserved for a properly described system using Newton's third law.
Newton's third law may be used to show that momentum is preserved for a system that is adequately defined. The Earth is being drawn towards the item in an equal and opposing force to that of gravity acting on the object while it is in free fall. As a result, the object's momentum is transferred to the Earth, which has a considerably higher mass and is hence more difficult to detect. The system's overall momentum—that of the Earth and the object—remains preserved. An open system like this one allows momentum to be shared with the environment while yet adhering to conservation standards.
learn more about Newton here:
https://brainly.com/question/4128948
#SPJ4
what is the pv factor of a material that has a maximum pressure of 256 psi and a maximum velocity of 285 ft/min?
The PV factor of the material is 73080 psi-ft/min.
The PV factor of a material is a measure of its ability to withstand the combined effects of pressure and velocity. It is calculated by multiplying the maximum pressure (in psi) by the maximum velocity (in feet per minute).
PV factor = maximum pressure (in psi) × maximum velocity (in ft/min)
Plugging in the given values, we get:
PV factor = 256 psi × 285 ft/min
PV factor = 73080 psi-ft/min
To learn more about The PV factor you can click this link below: https://brainly.com/question/15432294
#SPJ11
what is resistance of the load if 10.0 volts generate a current of 700 milliamps? audio signals and systems
The resistance of the load, given that 10.0 volts generate a current of 700 milliamps, is 14.3 ohms. To calculate this, you need to use Ohm's Law, which states that resistance (R) is equal to the voltage (V) divided by the current (I).
Therefore, R = V / I, or in this case, R = 10.0 volts / 0.700 amps = 14.3 ohms.
The resistance of the load can be calculated using Ohm's law, which states that the resistance is equal to the voltage divided by the current. In this case, the resistance would be 10.0V/0.7A, which equals 14.29Ω
The concept of resistance is important in audio signals and systems. As audio signals are AC, the resistance of a load determines how much of the signal is attenuated as it passes through the load. A higher resistance means that the signal is weakened, while a lower resistance means that the signal is stronger.
Therefore, knowing the resistance of a load is important when setting up audio systems, as it affects the strength of the signal that is sent to the speakers. Furthermore, impedance, which is closely related to resistance, is important in audio signals and systems, as it affects the quality of the signal being sent to the speakers.
For more questions related to Resistance.
https://brainly.com/question/29427458
#SPJ11
at what point between earth and the moon will a 50,000 kg space probe experience no net force? give the distance between the probe and the earth in km
The point between Earth and the moon where a space probe will experience no net force would be 384,400 km from Earth.
The point between Earth and the moon where a 50,000 kg space probe experience no net force is called the Lagrangian point. The fifth Lagrangian point (L5) is located about 60 degrees behind the moon, about 384,400 km from Earth. Therefore, the distance between the probe and the Earth is 384,400 km, which is the average distance between the Moon and Earth.
The Lagrangian point is a point in space where the gravitational forces of two major celestial bodies (such as Earth and the moon) or more celestial bodies balance the gravitational forces, allowing a third smaller body to remain in constant position relative to the larger bodies.
L5, the fifth Lagrangian point, is a Lagrangian point in the Earth-Moon system, located about 60 degrees behind the Moon. It is approximately 384,400 km away from Earth, the same as the average distance between Earth and the Moon. It is one of the stable equilibrium points of the Earth-Moon system, as the gravitational forces of the Earth and the Moon balance the centrifugal force acting on a spacecraft at this point.
Learn more about Lagrangian point:
https://brainly.com/question/29084799
#SPJ11
a soccer player kicks a rock horizontally off a 34 m high cliff into a pool of water. if the player hears the sound of the splash 2.78 s later, what was the initial speed given to the rock (in m/s)? assume the speed of sound in air is 343 m/s.
The initial speed given to the rock was approximately 100.96 m/s.
The time it takes for the rock to fall from the cliff to the water can be found using the kinematic equation,
h = 1/2gt^2
where h is the height of the cliff (34 m), g is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the rock to fall. Solving for t,
t = sqrt(2h/g) = sqrt(2 * 34 / 9.81) = 2.15 s
The horizontal velocity of the rock can be found using the equation,
v = d/t
where d is the horizontal distance the rock travels (unknown) and t is the time it takes for the rock to hit the water (2.78 s). We can use the speed of sound in air (343 m/s) to find the distance d, since the time it takes for the sound of the splash to reach the player is equal to the time it takes for the rock to travel that distance plus the time it takes for the sound to travel that same distance,
2.78 s = t + d/343
Solving for d,
d = (2.78 - t) * 343 = (2.78 - 2.15) * 343 = 217.11 m
Now that we know the horizontal distance the rock travels, we can find its initial velocity using the equation,
v = d/t = 217.11/2.15 = 100.96 m/s
To know more about speed, here
brainly.com/question/30622344
#SPJ4
a 200 ohm, 250 ohm and 1000 ohm resistor are connected in parallel across a source. the source current is 6a. how much is the current that flows through the 200 ohm resisto
The current that flows through the 200 Ω resistor is 1.56 A.
Given resistance values of 200 Ω, 250 Ω, and 1000 Ω are connected in parallel across a source. The source current is 6 A. We are required to find the current that flows through the 200 Ω resistor.
Recall that when resistors are connected in parallel, the current is divided among them. And the voltage across each resistor is the same. The equivalent resistance of three parallel resistors is given by;
1/Rp = 1/R1 + 1/R2 + 1/R3Rp = (R1 x R2 x R3)/(R1R2 + R1R3 + R2R3)
Put the values into the formula;
Rp = (200 x 250 x 1000)/(200×250 + 200×1000 + 250×1000)
Rp = 52.17 Ω
The total current in the circuit, It = 6 A
From Ohm's Law;
V = IR,
where V is the voltage across each resistor
V1 = V2 = V3V = I×R
Therefore; V = I×Rp
The current flowing through the 200 Ω resistor, I1 = V1/200 = I × Rp/200The current flowing through the 200 Ω resistor, I1 = (6×52.17)/200I1 = 1.56 A
Thus, the current that flows through the 200 Ω resistor is 1.56 A.
To know more about Parallel current, refer here:
https://brainly.com/question/27986190#
#SPJ11
a heavy fish (mass 4 kg) is swimming with a speed of 1.5 m/s. he then swallows a light fish (1.2 kg), swimming toward him with a speed of 3.0 m/s. what is the velocity of the larger fish after he had his meal? (you can neglect water resistance.)
The velocity of the larger fish after the meal is zero.
We can use the law of conservation of momentum, which states that the total momentum of a closed system remains constant. Before the light fish is swallowed, the total momentum is,
p1 = m1v1 + m2v2
where m1 = 4 kg, v1 = 1.5 m/s (velocity of the heavy fish), m2 = 1.2 kg, and v2 = -3.0 m/s (negative because the light fish is swimming toward the heavy fish).
p1 = (4 kg)(1.5 m/s) + (1.2 kg)(-3.0 m/s)
p1 = 0 kg m/s
After the light fish is swallowed, the two fish become one system. Let the velocity of the larger fish after the meal be v.
The total momentum of the system after the meal is,
p2 = (m1 + m2)v
By the law of conservation of momentum, p1 = p2,
0 kg m/s = (4 kg + 1.2 kg) v
Solving for v,
v = 0 m/s
To know more about speed, here
brainly.com/question/31080132
#SPJ4
if the protoplanets maintain their locations from the sun, then which one is most likely to become a jovian planet?
The furthest protoplanet from the Sun is most likely to become a jovian planet due to the abundance of solid ice grains in the outer regions.
Jovian planets, otherwise called gas goliaths, are enormous planets that are fundamentally made out of hydrogen and helium, with a thick climate and no strong surface. These planets are accepted to have shaped further from the Sun than the earthly planets, in locales of the sun oriented cloud where the temperature was low enough for hydrogen and helium to consolidate into strong ice grains, known as planetesimals. This is on the grounds that in the external districts of the sun based cloud, the temperature was low enough for strong ice grains to collect and shape a strong center, which could then accumulate gas from the encompassing cloud to frame a thick air.Consequently, the protoplanet found uttermost from the Sun has a more prominent probability of turning into a jovian planet because of the overflow of strong ice grains in the external locales of the sun powered cloud.
To learn more about jovian planet, refer:
https://brainly.com/question/18089177
Two pieces of clay are thrown towards each other. The blue clay has a mass of 2 kg and is traveling at 1.5 m/s east. The red clay has a mass of 1.5 kg and is
traveling at 2.5 m/s west (negative velocity). They stick together after they collide. What is the final velocity of the combined clay pieces after the collision? East
is considered positive direction.
Explanation:
To solve this problem, we can use the law of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces.
Before the collision, the momentum of the blue clay is:
momentum of blue clay = mass of blue clay * velocity of blue clay
= 2 kg * 1.5 m/s = 3 kg*m/s to the east (positive)
Before the collision, the momentum of the red clay is:
momentum of red clay = mass of red clay * velocity of red clay
= 1.5 kg * (-2.5 m/s) = -3.75 kg*m/s to the west (negative)
The total momentum before the collision is:
total momentum before collision = momentum of blue clay + momentum of red clay
= 3 kgm/s - 3.75 kgm/s = -0.75 kg*m/s to the west (negative)
After the collision, the two clays stick together and move as one combined object. Let's assume that the final velocity of the combined clay pieces after the collision is v.
By the law of conservation of momentum, the total momentum after the collision is equal to the total momentum before the collision:
total momentum after collision = total momentum before collision
= -0.75 kg*m/s
The combined mass of the two clays after the collision is:
combined mass = mass of blue clay + mass of red clay
= 2 kg + 1.5 kg = 3.5 kg
Therefore, the final velocity of the combined clay pieces after the collision is:
v = total momentum after collision / combined mass
= (-0.75 kg*m/s) / 3.5 kg
= -0.214 m/s to the west (negative)
Since the negative velocity indicates a direction to the west, the final velocity of the combined clay pieces after the collision is 0.214 m/s to the west.
What evidence is there to explain the energy of two blocks?
Answer:
To explain the energy of two blocks, several types of evidence can be used depending on the context and the specific question being asked. Here are some examples:
Kinetic energy: The kinetic energy of a moving object is given by the formula KE = 0.5 * m * v^2, where m is the mass of the object and v is its velocity. If the two blocks are moving, their kinetic energy can be calculated using this formula.
Potential energy: The potential energy of an object is the energy it possesses by virtue of its position or configuration. If the two blocks are lifted to a certain height, they will possess potential energy due to their position in the Earth's gravitational field. The potential energy of an object is given by the formula PE = m * g * h, where m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.
Work done: If a force is applied to move the two blocks, work is done on them. The work done on an object is given by the formula W = F * d, where F is the force applied, and d is the distance over which the force is applied.
Conservation of energy: The law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another. Therefore, if the energy of the two blocks changes, it must be due to the transfer of energy from one form to another, such as from potential energy to kinetic energy or vice versa.
Overall, the evidence used to explain the energy of two blocks will depend on the specific context of the question being asked and the type of energy being considered.
at a certain location, wind is blowing steadily at 10 m/s. determine the mechanical energy of air per unit mass and the power generation potential of a wind turbine
At a certain location, the wind is blowing steadily at 10 m/s. Determine the mechanical energy of air per unit mass and the power generation potential of a wind turbine is 98.4 kW.
Mechanical energy of air per unit mass:
Mechanical energy of air per unit mass can be calculated using the formula given below:
Mechanical energy of air per unit mass = 1/2(v²)
Where, v = velocity of air = 10 m/s
Putting the values in the above formula, we get:
M.E of air per unit mass = 1/2 (10²) = 50 J/kg.
Power generation potential of a wind turbine:
The power generated by a wind turbine can be calculated using the formula given below:
Power generated = 1/2ρAv³Cp
Where, ρ = density of air = 1.23 kg/m³A = area of the wind turbine blades = 100 m² (assuming a 10 m diameter turbine) Cp = coefficient of performance of the wind turbine = 0.4 (typical value for modern wind turbines)
Putting the values in the above formula, we get:
Power generated = 1/2 x 1.23 x 100 x (10)³ x 0.4 = 98400 W = 98.4 kW.
for such more question on power generation potential
https://brainly.com/question/21430867
#SPJ11
based on computer models, when is planetary migration most likely to occur in a planetary system? based on computer models, when is planetary migration most likely to occur in a planetary system? shortly after a stellar wind clears the gaseous disk away late in its history, when asteroids and comets occasionally collide with planets early in its history, when there is still a gaseous disk around the star
According to computer models, planetary migration is most likely to occur in a planetary system early in its history, when there is still a gaseous disk around the star.
What is planetary migration?Planetary migration is the process by which a planet changes its orbital position over time. The process is often caused by gravitational interactions with other planets or a planetesimal disk, which causes the planet to migrate inward or outward from its original orbit.
Other factors that can contribute to planetary migration include the late stages of a star's evolution when a stellar wind clears the gaseous disk away and asteroids and comets occasionally collide with planets.
However, early in a planetary system's history, when there is still a gaseous disk around the star, is the most likely time for planetary migration to occur.
To know more about planetary migration:
https://brainly.com/question/29360183
#SPJ11
g which of the following statements is correct about this circuit? the equivalent resistance of the circuit is the algebraic sum of all resistors. all of these options are true. total voltage on this combination is an algebraic sum of voltages on each resistor. currents through all resistors are the same.
The following statement is true about this circuit: option (A) The equivalent resistance of the circuit is the algebraic sum of all resistors.
This means that the total resistance of the circuit is equal to the sum of the individual resistances of each resistor. The total voltage on this combination is an algebraic sum of voltages on each resistor. This means that the total voltage of the circuit is equal to the sum of the voltages across each individual resistor.
The currents through all resistors are the same. This means that the total current that flows through the circuit is the same as the current that flows through each individual resistor.
To summarize, in a series circuit the equivalent resistance, total voltage, and current are equal to the algebraic sum of all the individual resistances, voltages, and currents respectively.
To know more about resistance refer here:
https://brainly.com/question/11431009#
#SPJ11
A mass of 0.450 kg rotates at costant speed with a period of 1.45s at a radius R of 0.140 m in the apparatus used in this laboratory. What is the rotation period for a mass of 0.550 kg at the same radius? Show your work. (Extra information that might or might not be important: For the apparatus used in this laboratory, the centripetal force is the same for a fixed radius R of rotation. This wasn't stated in this question but it was in the question before it.)
Rotation period for a mass of 0.550 kg at the same radius is 1.45 s.
The rotation period of a mass in circular motion is given by:
T = 2πR/v
where T is the period, R is the radius of the circular path, and v is the velocity of the mass.
For the first mass with a mass of 0.45 kg, radius R of 0.140 m, and period T of 1.45 s, we can calculate the velocity as follows:
v = 2πR/T = 2π(0.140 m)/(1.45 s) = 0.6066 m/s
Now, we can use the velocity and radius values to find the period for the second mass with a mass of 0.550 kg:
T = 2πR/v = 2π(0.140 m)/(0.6066 m/s) = 1.45 s
Therefore, the rotation period for a mass of 0.550 kg at the same radius is 1.45 s.
learn more about 'rotation':https://brainly.com/question/16931421
#SPJ11
a student is investigating two transverse waves. one of the waves is electromagnetic and the other wave is mechanical. which question would best help the student identify each wave as either electromagnetic or mechanical?
The question that would best help the student identify each wave as either electromagnetic or mechanical is "What type of energy is transferred by each wave?".
Thus, the correct answer is "What type of energy is transferred by each wave?" (D).
Electromagnetic waves are those that do not require a medium to propagate, while mechanical waves are those that require a medium. This means that if the wave is a mechanical wave, it needs a medium to propagate. Therefore, the student can easily distinguish the electromagnetic wave from the mechanical wave by asking what type of energy is transferred by each wave.
Your question is incomplete, but most probably your options were
A. Which wave has more energy?
B. Which wave can travel through air?
C. What direction does each of the waves travel?
D. What type of energy is transferred by each wave?
Thus, the correct option is D.
For more information about electromagnetic and mechanical waves refers to the link: https://brainly.com/question/3101711
#SPJ11
at what angle of deflection makes the magnetic field strngth produced by the coil of the wire equal to the ambient magnetic field
The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle.
The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle. The Biot-Savart Law, which relates magnetic field strength to the current in a wire and the distance from the wire, applies to a wire coil.
The strength of the magnetic field generated by a current-carrying wire is proportional to the current in the wire and the number of turns per unit length. The magnetic field's intensity is determined by the number of turns in the wire coil, the current in the wire coil, the radius of the coil, and the permeability of free space.
The equation for calculating the magnetic field strength at a point in space around a current-carrying wire is given by the Biot-Savart Law:
B = µ₀I/2πr.
Where µ₀ is the permeability of free space, I is the current, and r is the distance from the wire to the point where the magnetic field strength is to be calculated.
Learn more about Biot-Savart Law at https://brainly.com/question/29564274
#SPJ11
which of the following energies are part of the total energy of a flowing fluid? multiple select question. enthalpy kinetic energy shaft work potential energy heat
The energies that are part of the total energy of a flowing fluid are as follows: enthalpy, kinetic energy, and potential energy.
Energy is the capacity to accomplish work or to transfer heat. The total energy of a fluid in motion is made up of both kinetic and potential energies.
Enthalpy is a thermodynamic property that accounts for the internal energy of a fluid system as well as the work required to move the fluid against external pressureThe potential energy of an object is the energy it has by virtue of its location or arrangement. It is a form of energy that is stored as a result of an object's place or position. Kinetic energy, on the other hand, is the energy of an object in motion. If a moving object collides with another object, it can transfer energy to that object.Other options are:
Shaft work refers to the work done by a rotating shaft, which is not directly related to the fluid itselfHeat is a form of energy transfer rather than an inherent property of the fluid.Therefore, the total energy of a flowing fluid consists of enthalpy, kinetic energy, and potential energy.
To know more about potential energy click here:
https://brainly.com/question/24284560
#SPJ11
some music has a slow-moving pulse and some music has a fast-moving pulse. the speed at which the pulse moves in music is known as its
The speed at which the pulse moves in music is known as its tempo. Tempo is measured in beats per minute (BPM) and is the speed of the underlying pulse of a piece of music.
Tempo is the speed at which a piece of music is played. It is measured in beats per minute (BPM), and it affects the overall mood of a piece of music. The tempo of a piece of music is typically determined by the composer, but it may also be affected by the performer's interpretation. Different types of music have different tempos; for example, a ballad may have a slow tempo, while a dance tune may have a fast tempo.
The speed at which the pulse moves in music is known as its tempo. Tempo can vary significantly between pieces and is often indicated in a piece's score with the terms allegro (fast), moderato (moderate) or largo (slow).
In music, the pulse refers to the beat that you can feel in the music. It is the underlying rhythm that keeps the music moving forward. The pulse is usually created by the drums or other percussion instruments in the music, but it may also be created by other instruments or by the vocals. Different types of music have different pulses; for example, a ballad may have a slow-moving pulse, while a dance tune may have a fast-moving pulse.
For more such questions on tempo , Visit:
https://brainly.com/question/3451676
#SPJ11
when you first start a car after it has been sitting for more than an hour, it pollutes up to ......times more than when the engine is warm.
When a car has been sitting idle for more than an hour, the first few minutes of starting the engine can result in significantly more emissions than when the engine is warm. This is due to the formation of cold start hydrocarbon (HC) emissions. When an engine is cold, the fuel and air mixture is not as well vaporized as when the engine is warm. The unvaporized fuel droplets are pushed out of the tailpipe, resulting in higher HC emissions.
To reduce cold start emissions, cars are now equipped with technology like onboard computers, direct injection systems, variable valve timing, and catalytic converters. These technologies work to increase the fuel efficiency and reduce the amount of hydrocarbons released into the atmosphere.
In summary, starting a car after it has been sitting idle for more than an hour can result in up to 10 times more emissions than when the engine is warm. To mitigate this, cars are now equipped with advanced technology to reduce emissions and improve fuel efficiency.
Know more about pollutants here:
https://brainly.com/question/29594757
#SPJ11
light consisting of 4.8 ev photons is incident on a piece of aluminum, which has a work function of 4.3 ev.What is the maximum kinetic energy of the ejected electrons?
- 9.1 eV
- 4.3 eV
- 4.8 eV
- 0.5 eV
The maximum kinetic energy of the ejected electrons when light consisting of 4.8 eV photons is incident on a piece of aluminum with a work function of 4.3 eV is 0.5 eV. The correct option is D.
Here's a step-by-step explanation:
1. When light consisting of photons with a certain energy (in this case, 4.8 eV) is incident on a metal (aluminum), it interacts with the electrons in the metal.
2. The energy of the photons is used to do work on the electrons to overcome the work function of the metal. The work function is the minimum energy required to free an electron from the surface of the metal.
3. In this case, the work function of aluminum is 4.3 eV. Since the energy of the incident photons is 4.8 eV, which is greater than the work function, the electrons can be ejected from the aluminum.
4. The maximum kinetic energy of the ejected electrons is determined by the difference between the energy of the incident photons and the work function of the metal. This is because any extra energy from the photons (beyond the work function) is converted into kinetic energy for the ejected electrons.
5. To calculate the maximum kinetic energy, subtract the work function (4.3 eV) from the energy of the incident photons (4.8 eV): Maximum kinetic energy = 4.8 eV - 4.3 eV = 0.5 eV
So, the maximum kinetic energy of the ejected electrons is 0.5 eV.
To know more about kinetic energy refer here:
https://brainly.com/question/26472013#
#SPJ11
a 240 g air-track glider is attached to a spring. the glider is pushed in 8.2 cm against the spring, then released. a student with a stopwatch finds that 14 oscillations take 11.0 s . What is the spring constant?
The spring constant is 0.28 N/m if 14 oscillations take 11.0s.
In physics, oscillations are defined as a repetitive variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. The spring constant (k) is a measure of a spring's stiffness. It is the amount of force required to displace a spring a specific distance (typically one meter).
The spring constant formula is expressed as:-
F=kx
where k is the spring constant and x is the displacement produced by the force F.
We know that the air-track glider has a mass of 240 g, and it is attached to a spring. The glider is pushed 8.2 cm against the spring and then released. The oscillations are then observed, and it is found that 14 oscillations occur in 11.0 s.
We can calculate the spring constant by using this information.
Let us now calculate the spring constant k.
For a mass (m) attached to a spring, the formula for the time period T is:-
T=2π√m/k
We know that the time period T = 11/14 s. We also know that the glider has a mass of 240 g or 0.24 kg.
Now, we can solve the formula for the spring constant k as follows:-
k= 4π²m/T²k = 4π² × 0.24 kg / (11/14 s)²k = 0.28 N/m
Therefore, the spring constant is 0.28 N/m.
Learn more about oscillations: https://brainly.com/question/27237546
#SPJ11
a material has temperature coefficient of resistance (alpha) of 3.9 x 10^-3. if the material has a resistance of 23 ohms at a temperature of 20 c, what is the resistance of this material at a temperature of 50 c?
The resistance of the material at a temperature of 50°C is approximately 25.791 Ω.
We can use the formula for temperature dependence of resistance to solve this problem:
R2 = R1 [1 + α(T2 - T1)]
where R1 is the resistance at temperature T1, R2 is the resistance at temperature T2, and α is the temperature coefficient of resistance.
Plugging in the given values, we get:
R2 = 23 Ω [1 + (3.9 x 10⁻³/°C)(50°C - 20°C)]
Simplifying, we get:
R2 = 23 Ω [1 + (3.9 x 10^-3/°C)(30°C)]
R2 = 23 Ω [1 + 0.117]
R2 = 23 Ω [1.117]
R2 = 25.791 Ω
Therefore, the resistance of the material is approximately 25.791 Ω.
Learn more about Resistance:
#SPJ11
write the abbreviation for the base unit of each of these quantities in the metric system. mass: m length:
The abbreviation for the base unit of mass in the metric system is "m" and the abbreviation for the base unit of length in the metric system is "l". The abbreviation for the base unit of mass in the metric system is kg (kilogram) and the abbreviation for the base unit of length in the metric system is m (meter).
What is the metric system? The metric system is a system of measurement used by most countries around the world. It is also known as the International System of Units (SI). It has a base unit for each quantity it measures. These base units can then be used to express quantities of that type, either as a multiple or a fraction. For example, the base unit for mass is the kilogram (kg). We can express mass in grams (g), which is a smaller unit of mass. A kilogram is equal to 1000 grams. Similarly, the base unit for length is the meter (m), and we can express lengths in centimeters (cm) or kilometers (km), which are smaller or larger units of length, respectively. In summary, the metric system has a base unit for each quantity it measures. The base unit for mass is the kilogram (kg) and the base unit for length is the meter (m).
For more details on metric system , click on the below link:
https://brainly.com/question/23183575
#SPJ11
A cylinder with a moment of inertia I (about its axis of symmetry), mass m, and radius r has a massless string wrapped around it which is tied to the ceiling (Figure 1) .
At time t=0 the cylinder is released from rest at height h above the ground. Use g for the magnitude of the acceleration of gravity. Assume that the string does not slip on the cylinder. Let v? represent the instantaneous velocity of the center of mass of the cylinder, and let ?? represent the instantaneous angular velocity of the cylinder about its center of mass. Note that there are no horizontal forces present, so for this problem v? =?vj^and ?? =??k^.
In the cylinder, This equation can be solved for ω, and then v can be found using the relationship v = r * ω.
When the cylinder is released from rest, its gravitational potential energy is converted into kinetic energy (translational and rotational). To find the instantaneous velocity (v) and angular velocity (ω) of the cylinder, we can apply the conservation of mechanical energy and the relationship between linear and angular velocities.
Initially, the cylinder has potential energy (PE) due to its height (h) above the ground:
PE_initial = m * g * h
When the cylinder descends and starts rotating, it has both translational kinetic energy (KE_trans) and rotational kinetic energy (KE_rot):
KE_trans = 0.5 * m * v^2
KE_rot = 0.5 * I * ω^2
Since the string does not slip, we can relate linear velocity (v) to angular velocity (ω) as:
v = r * ω
Now, applying the conservation of mechanical energy:
PE_initial = KE_trans + KE_rot
Substituting the expressions for PE_initial, KE_trans, and KE_rot, and the relationship between v and ω, we get:
m * g * h = 0.5 * m * (r * ω)^2 + 0.5 * I * ω^2
For more such questions on cylinder
brainly.com/question/31299975
#SPJ11
Valdez notices that a wooden door in his house is difficult to open in the summer, but not in the winter. Valdez explains to Tony that the temperature of the door changes throughout the year. Tony says there is no way to measure the temperature of a solid because solids do not have a lot of thermal expansion. Valdez disagrees. Develop an argument supporting or opposing Tony's claim.
Explanation:
Tony's claim that solids do not have a lot of thermal expansion is partially true, but it is not entirely accurate. All materials, including solids, do undergo some degree of thermal expansion or contraction when their temperature changes. However, the amount of expansion or contraction varies depending on the material's coefficient of thermal expansion (CTE), which measures the material's response to temperature changes.
Some materials, like metals, have a high CTE and undergo significant expansion or contraction when their temperature changes. On the other hand, materials like ceramics and glasses have a low CTE and undergo relatively little expansion or contraction. Wood, which is the material used to make the door in Valdez's house, has a moderate CTE, meaning it undergoes some degree of expansion or contraction with changes in temperature.
Therefore, Valdez's argument is valid. The wooden door in his house experiences thermal expansion in the summer due to the higher temperatures. As the temperature increases, the particles in the wood gain kinetic energy, move faster, and create more space between each other, which results in the door expanding. Conversely, in the winter, the lower temperatures cause the particles in the wood to lose energy, move slower, and become closer to each other, which results in the door contracting.
In conclusion, while Tony's statement is correct in that solids do not have a lot of thermal expansion compared to liquids or gases, all solids, including wood, do experience some degree of thermal expansion or contraction due to changes in temperature.
A generator of alternating current provides a rms voltage Vrms = 250 kV, and an
average power P = 2 × 105 kW. This power is transferred to a city located at a
distance L = 180 km away, so that the average power loss along the line is Pline/ P =12%. (a) What is the rms current I rms provided by the generator?
(b) What is the resistance R of the 180-km long transmission cable?
(c) Assuming the line consists of a copper wire (resistivity rho = 1. 7 × 10−8 Ω m),
what is the cross sectional area A of the transmission wire?
(a) To find the rms current I_rms provided by the generator, we can use the formula for average power:
[tex]P = V_{rms} * I_{rms}[/tex]
Rearranging this formula gives:
[tex]I_{rms} = P / V_{rms}[/tex]
= 2 x 10^5 kW / 250 kV = 800 A
Therefore, the rms current provided by the generator is 800 A.
(b) The average power loss along the line is given by:
[tex]P_{loss} = P_{line} / P = 0.12[/tex]
where P_line is the power delivered to the city. Rearranging this formula gives:
[tex]P_{line} = P / (1 - P_{loss})[/tex]= 2 x 10^5 kW / (1 - 0.12) = 2.27 x 10^5 kW
The power loss along the line is given by:
[tex]P_{loss} = I_{rms}^2 * R * L[/tex]
where R is the resistance of the transmission cable and L is the distance of the cable. Substituting the values given and solving for R gives:
R = [tex]P_{loss} / (I_{rms}^2 * L)[/tex]= 0.0153 Ω
Therefore, the resistance of the 180-km long transmission cable is 0.0153 Ω.
(c) The resistance of a wire is given by:
R = rho * L / A
where rho is the resistivity of the material, L is the length of the wire, and A is the cross-sectional area of the wire. Solving for A gives:
A = rho * L / R = (1.7 x 10^-8 Ω m) * 180,000 m / 0.0153 Ω = 200 mm^2
Therefore, the cross-sectional area of the transmission wire is 200 mm^2.
An electric generator consists of a rotor (a rotating part) and a stator (a stationary part). The rotor is connected to a shaft that is driven by an external source, such as an engine or a turbine. The stator contains a set of coils of wire that are arranged around the rotor. When the rotor spins, it creates a changing magnetic field that induces an electric current in the coils of wire in the stator.
Electric generators are used in a variety of applications, from small portable generators for camping and outdoor activities to large power plants that provide electricity to entire cities. They are also used in renewable energy systems, such as wind turbines and hydroelectric power plants, to convert the mechanical energy of wind and water into electricity.
To learn more about Generator visit here:
brainly.com/question/15277088
#SPJ4
when a sprinter uses starting blocks to enhance running performance, which of newton's laws is best represented by the interaction of the sprinter and the blocks?
The interaction between the sprinter and the starting blocks best represents Newton's Third Law. Newton's Third Law is "For every action, there is an equal and opposite reaction."
When a sprinter pushes off against the starting blocks, the force they exert on the blocks (the action) is met with an equal and opposite force from the blocks pushing back against the sprinter (the reaction). This reaction force propels the sprinter forward and helps them to achieve a more powerful and explosive start. Newton's Third Law of Motion is particularly relevant to sports and athletics, as many actions in sports involve interactions between two objects or individuals, such as a runner pushing off against the ground or a football player colliding with another player.
Learn more about newton's laws: https://brainly.com/question/28171613
#SPJ11