The pH of the mixture is nearly 10.7.
To calculate the pH of the given solution, we need to first consider the ionization of the nitrite ion (NO₂⁻) in water. NO₂⁻ is a weak base, which means that it can accept hydrogen ions (H⁺) from water to form the conjugate acid, nitrous acid (HNO₂).
The equilibrium expression for the ionization of NO₂⁻ in water is:
NO₂⁻ + H₂O ⇌ HNO₂ + OH-
The base dissociation constant, Kb, for NO₂⁻ can be calculated using the ionization constant for its conjugate acid, HNO₂:
Kb = Kw / Ka
where Kw is the ionization constant for water and Ka is the acid dissociation constant for HNO₂. The value of Kw is 1.0 x 10⁻¹⁴ at 25°C.
The value of Ka for HNO₂ is 4.5 x 10⁻⁴. Therefore, the value of Kb for NO₂⁻ can be calculated as:
Kb = Kw / Ka = (1.0 x 10⁻¹⁴) / (4.5 x 10⁻⁴) = 2.2 x 10⁻¹¹
Now, we can calculate the concentration of OH⁻ ions in the solution using the Kb value and the initial concentration of NO₂⁻. Since NaNO₂ is a neutral salt, it will dissociate completely into Na⁺ and NO₂⁻ ions in water. Therefore, the initial concentration of NO₂⁻ is given by:
[NO₂⁻] = mass of NaNO₂ / molar mass of NaNO₂ / volume of solution
[NO₂⁻] = (3.97 g / 68.99 g/mol) / (500 mL / 1000 mL/L) = 0.114 M
Using the Kb value and the initial concentration of NO₂⁻, we can calculate the concentration of OH⁻ ions as follows:
Kb = [HNO₂][OH-] / [NO₂⁻]
[OH-] = Kb x [NO₂⁻] / [HNO₂]
[OH-] = (2.2 x 10⁻¹¹) x (0.114 M) / x
where x is the concentration of HNO₂, which we can assume is small compared to the initial concentration of NO₂⁻
[OH⁻] ≈ (2.2 x 10⁻¹¹ x (0.114 M) / 0.114 M
[OH⁻] = 2.2 x 10⁻¹¹ M
Finally, we can calculate the pH of the solution using the concentration of OH⁻ ions:
pH = 14 - pOH = 14 - (-log[OH⁻]) = 14 - (-log(2.2 x 10⁻¹¹) ≈ 10.7
Therefore, the pH of the solution is approximately 10.7.
To learn more about solution refer to:
brainly.com/question/30665317
#SPJ4
a 0.261 g sample of nahc2o4 (one acidic proton) required 17.5 ml of sodium hydroxide solution for complete reaction. determine the molar concentration of the sodium hydroxide solution.
The molar concentration of the sodium hydroxide solution is 0.37 mol/L.
To determine the molar concentration of the sodium hydroxide solution, the following equation can be used:
Molarity = (Mass of Solute/Molecular Weight of Solute) / (Volume of Solution in L)
In this case, the solute is sodium hydroxide (NaOH) and the molecular weight of NaOH is 40.00 g/mol.
The mass of the solute must be calculated. Since 0.261 g of NaHC₂O₄ (one acidic proton) requires 17.5 ml of sodium hydroxide solution for a complete reaction, the mass of NaOH required must also be equal to 0.261 g since the equivalence of both is 1. Then the volume of the solution (in liters) is determined. Since 1 ml = 0.001 L, 17.5 ml = 0.0175 L.
Plugging the values into the equation gives:
Molarity = (0.261g/40.00 g/mol) / (0.0175 L) = 0.37 mol/L
Therefore, the molar concentration of the sodium hydroxide solution is found to be 0.37 mol/L when 0.261 g of NaHC₂O₄ required 17.5 ml of sodium hydroxide solution for a complete reaction.
To know more about molar concentration, refer here:
https://brainly.com/question/15532279#
#SPJ11
what volume (ml) of a concentrated solution of sodium hydroxide (6.00m) must be diluted to 200.ml to make a 1.50m solution of sodium hydroxide?
Answer : 50 ml of a 6.00 M solution of sodium hydroxide must be diluted to 200 ml to make a 1.50 M solution of sodium hydroxide.
The volume (in ml) of concentrated sodium hydroxide solution (6.00 M) to be diluted to 200 ml in order to make a 1.50 M sodium hydroxide solution is 25.0 ml. Dilution of the solution is a process of reducing the concentration of a solute in a solution. It is the process of adding solvent or diluent to the solution to obtain a lower concentration of the solute in the solution.
Concentration (C) can be defined as the number of moles of solute (n) per volume of solution (V):C = n/VWe can derive a dilution equation from this definition: C1V1 = C2V2, where C1 is the initial concentration of the solute, V1 is the initial volume of the solution, C2 is the final concentration of the solute, and V2 is the final volume of the solution.
The number of moles of solute in the final solution is:n2 = C2 x V2We can substitute these values in the dilution equation to get: C1V1 = C2V2 Therefore: V1 = (C2V2)/C1 Substituting the given values in the above equation gives: V1 = (1.50 x 200)/6.00 = 50 ml
Know more about sodium hydroxide here:
https://brainly.com/question/29327783
#SPJ11
Chemical equilibrium occurs when free energy exists in the _____.
highest possible value
lowest possible value
The statement that correctly defines chemical equilibrium is, "Chemical equilibrium occurs when free energy exists in the lowest possible value."
Chemical equilibrium is a state in which the forward and reverse chemical reactions take place at the same rate. The point at which this occurs is referred to as the equilibrium point.
The forward and backward reactions that result in chemical equilibrium continue to occur; they just occur at the same speed, resulting in no net change in the system's chemical concentration over time.
The Gibbs free energy of a chemical reaction determines the spontaneity of the reaction. If the ΔG value is positive, the reaction is non-spontaneous; if the ΔG value is negative, the reaction is spontaneous; and if the ΔG value is zero, the system is in equilibrium. In equilibrium, the free energy exists in the lowest possible value.
To learn more about chemical equilibrium refer: https://brainly.com/question/30884265
#SPJ11
is/are needed to stop the movement of solvent through a membrane. responses water molecules water molecules solvent molecules solvent molecules osmotic pressure osmotic pressure an increase in temperature an increase in temperature an decrease in termperature an decrease in termperature
Osmotic pressure is needed to stop the movement of solvent through a membrane.
Osmotic pressure is created when a solution is separated from a more concentrated solution, resulting in molecules of the solvent moving towards the more concentrated solution.
In order for the solvent molecules to not move through the membrane, the pressure on either side must be equal, which is why osmotic pressure is needed.
Osmotic pressure is measured in atmospheres and can be increased through the addition of more molecules to the solution or decreased through the removal of molecules.
Solvent molecules are required to maintain osmotic pressure, since they move between the two solutions. In a system where osmotic pressure is maintained, no solvent molecules will pass through the membrane.
The number of solvent molecules on either side of the membrane must be equal in order for the pressure on each side to remain balanced.
An increase or decrease in the number of molecules on one side of the membrane can cause the pressure to become imbalanced and result in the solvent molecules passing through the membrane.
An increase in temperature can also cause the pressure on either side of the membrane to become imbalanced, and result in the movement of the solvent molecules through the membrane.
An increase in temperature can cause the molecules to expand, resulting in an increase in pressure on one side and a decrease on the other.
An decrease in temperature can have the opposite effect, causing the pressure on both sides of the membrane to decrease, resulting in the movement of the solvent molecules.
In conclusion, osmotic pressure is needed to stop the movement of solvent through a membrane, and is maintained by having an equal number of solvent molecules on either side of the membrane.
An increase or decrease in temperature can also affect the osmotic pressure, resulting in the movement of the solvent molecules through the membrane.
to know more about Osmotic pressure refer here:
https://brainly.com/question/29819107#
#SPJ11
what is the ph of a 0.20 m acetic acid solution? hint: the ka of acetic acid, ch3cooh, is 1.8 x 10-5.
The pH of a 0.20 M acetic acid solution is 2.72.
The pH of a 0.20 M acetic acid solution can be calculated using the Ka of acetic acid, CH3COOH, which is 1.8 x 10-5.
We will use the equation for the dissociation of acetic acid to calculate the pH of the solution.
CH3COOH(aq) + H2O(l) ⇌ H3O+(aq) + CH3COO-(aq)
The equilibrium constant expression for the dissociation of acetic acid is given by
Ka = [H3O+][CH3COO-] / [CH3COOH].
Since we know the value of Ka and the initial concentration of acetic acid, we can solve for
the concentration of H3O+.Ka = [H3O+][CH3COO-] / [CH3COOH]
1.8 x 10-5 = [H3O+]2 / 0.20[H3O+]2 = 3.6 x 10-6[H3O+] = 1.9 x 10-3 M
The pH of the solution can then be calculated as:
pH = -log[H3O+]pH = -log(1.9 x 10-3)
pH = 2.72
Therefore, the pH of a 0.20 M acetic acid solution is 2.72.
To know more about pH, refer here:
https://brainly.com/question/30255888#
#SPJ11
true or false. the transfer of energy from one tropic level to the next is very efficient
False: Lindeman's law of trophic efficiency, which says that the efficiency of energy transferred from one trophic level to the next higher trophic level is about 10%, states that the transfer of energy from one trophic level to the next trophic level follows a 10% rule.
Is the efficiency of energy transfer from one trophic group to the next high?Energy transfer between trophic levels is inefficient. Only 10% or so of the net output at one level carries over to the next level. Ecological pyramids are diagrams that show the flow of energy, the accumulation of biomass, and the quantity of organisms at various trophic levels.
Is the efficiency of energy transfer from one trophic group to the next up to 90%?The ten percentile rule is usually used to describe how energy is transferred between trophic groups. 90% of the initial energy from one trophic level to the next is inaccessible because it is used for activities like movement, growth, respiration, and reproduction.
To know more about energy visit:-
https://brainly.com/question/8630757
#SPJ9
the amount of kinetic energy required to strain the chemical bonds in substrates so they can achieve the transition state is the definition of ?
The amount of kinetic energy required to strain the chemical bonds in substrates so they can achieve the transition state is the definition of activation energy.
What is Activation Energy?
Activation energy is the amount of energy required for a chemical reaction to occur. The energy that must be provided to molecules in order for them to react with one another is known as activation energy.
This can be accomplished in a variety of ways, such as by increasing the temperature or pressure, adding a catalyst, or irradiating the reactants with light.
Activation energy is defined as the energy required for the reaction to begin. It's the energy that molecules require to overcome the initial barrier so that a reaction may proceed.
When a chemical reaction occurs, the reactants must collide with one another with sufficient force and in the appropriate orientation to form products.
It's critical to note that activation energy is a form of potential energy that isn't included in the overall energy change of a reaction.
To learn more about activation energy refer: https://brainly.com/question/11291663
#SPJ11
draw the lewis structure of the following molecules and match the molecule with its structural characteristics:
To draw the Lewis structure for the following molecules, follow these steps:
1. Count the total number of valence electrons for the molecule.
2. Arrange the atoms with the least electronegative atom in the center.
3. Distribute the electrons among the atoms, first by placing pairs between bonded atoms, then completing the octets for outer atoms.
4. If there are not enough electrons to complete the octets, form double or triple bonds as needed.
For example, let's consider molecule A: CO2.
1. Total valence electrons: C (4) + 2 * O (6) = 4 + 12 = 16 electrons
2. Place the least electronegative atom (C) in the center: O-C-O
3. Distribute electrons:
O-C-O (4 used)
O:C:O (8 used)
4. Form double bonds to complete octets:
O::C::O (16 used)
Lewis structure for CO2: O::C::O
Repeat this process for each molecule. Once you have the Lewis structures, you can match them with their structural characteristics, such as molecular geometry, bond angles, and polarity. For example, the CO2 molecule has a linear geometry, bond angles of 180°, and is nonpolar.
Please provide the specific molecules you would like to have the Lewis structures drawn for, and I will gladly help you match them with their structural characteristics.
now you know how much bsa stock solution you need to put into our new vessel. but, we still do not have 10 ml of a 10 mg/ml bsa solution. what do you think you could add to the new vessel to make it the final volume of 10 ml?
2 ml of the 50 mg/ml BSA stock solution is required to be added to the new vessel in order to make the final volume of 10 ml.
If we are not having 10 ml of a 10 mg/ml BSA solution, we then we are required to make it by adding some additional solvent or buffer to dilute the stock solution.
Let us assume that we are having some BSA stock solution, let's say 50 mg/ml, and we need 10 ml of 10 mg/ml BSA solution, we can use the following formula to calculate the required amount of stock solution and solvent:
C1V1 = C2V2
(Here, C1 is the concentration of the stock solution (50 mg/ml), V1 is the volume of the stock solution we need to use (which is unknown), C2 is the desired concentration (10 mg/ml), and V2 is the final volume we want to achieve (i.e. 10 ml).
Rearranging the formula above , we will be getting,
V1 = (C2V2)/C1
Substituting the values we have in the equation, we will be getting,
V1 = (10 mg/ml x 10 ml)/50 mg/ml = 2 ml
Therefore it can be said that we are needed to take 2 ml of the 50 mg/ml BSA stock solution and add it to the new vessel. To make the final volume 10 ml, we need to add 8 ml of the appropriate solvent or buffer.
Learn more about concentration of solutions :
https://brainly.com/question/15458177
#SPJ4
benefits/advantages of friedel crafts acylation reactions as compared to friedel crafts alkylation reactions?
Friedel crafts acylation is preferred over Friedel craft alkylation. Friedel crafts acylation reactions have many benefits as compared to Friedel crafts alkylation reactions.
Friedel-Crafts acylation and Friedel-Crafts alkylation reactions are both types of electrophilic substitution reactions that involve the formation of carbocations as intermediates. However, acylation is preferred over alkylation in certain situations.
Here are some benefits of Friedel-Crafts acylation reactions compared to Friedel-Crafts alkylation reactions:
1. Friedel-Crafts acylation reactions produce pure compounds as their major products because they do not involve any byproducts like Friedel-Crafts alkylation reactions.
2. The yields of Friedel-Crafts acylation reactions are often higher than those of Friedel-Crafts alkylation reactions.
3. Friedel-Crafts acylation reactions are more selective than Friedel-Crafts alkylation reactions because the acyl group is a better electrophile than the alkyl group.
4. The carbonyl group in the acylating agent (usually an acid chloride) can be selectively protected or modified using a variety of functional groups without affecting the aromatic ring. This is not possible in Friedel-Crafts alkylation reactions.
5. Friedel-Crafts acylation reactions can be carried out with a wider range of substrates (such as anisole or benzene) than Friedel-Crafts alkylation reactions.
6. The products of Friedel-Crafts acylation reactions are often more reactive than the starting materials, which allows for further functionalization or modification of the aromatic ring.
Learn more about Friedel-Crafts reaction - https://brainly.com/question/30861499#
#SPJ11
when a 26.5 ml sample of a 0.325 m aqueous hydrocyanic acid solution is titrated with a 0.489 m aqueous barium hydroxide solution, what is the ph after 13.2 ml of barium hydroxide have been added?
The pH of the solution after 13.2 mL of barium hydroxide has been added is 13.69. The volume of the hydrocyanic acid solution is 26.5 mL, which is 0.0265 L.
The balanced equation for the reaction between hydrocyanic acid and barium hydroxide is:
2 HCN + Ba(OH)2 → Ba(CN)2 + 2 H2O
This reaction is a neutralization reaction, which means that the number of moles of acid is equal to the number of moles of the base at the equivalence point. We can use this information to calculate the number of moles of barium hydroxide that have reacted with the hydrocyanic acid.
n(Ba(OH)2) = M(Ba(OH)2) x V(Ba(OH)2)
where M(Ba(OH)2) is the molarity of the barium hydroxide solution and V(Ba(OH)2) is the volume of barium hydroxide solution added.
Using the given values, we have:
n(Ba(OH)2) = 0.489 mol/L x 0.0132 L
= 0.00646 mol
Since the stoichiometry of the reaction is 2:1 for HCN to Ba(OH)2, the number of moles of HCN that have reacted is half the number of moles of Ba(OH)2:
n(HCN) = 0.5 x n(Ba(OH)2)
= 0.5 x 0.00646 mol
= 0.00323 mol
The volume of the hydrocyanic acid solution is 26.5 mL, which is 0.0265 L. Thus, the initial concentration of hydrocyanic acid is:
M(HCN) = n(HCN) / V(HCN)
= 0.00323 mol / 0.0265 L
= 0.122 M
At the equivalence point, all of the hydrocyanic acids have reacted, so the concentration of hydroxide ions (OH-) in the solution is equal to the concentration of barium hydroxide:
[OH-] = M(Ba(OH)2) = 0.489 M
The hydrocyanic acid dissociates in water to form hydrogen cyanide and hydronium ions (H3O+):
HCN + H2O ⇌ CN- + H3O+
The equilibrium constant expression for this reaction is:
Ka = [H3O+][CN-] / [HCN]
The value of Ka for hydrocyanic acid is 4.9 x 10^-10.
At the equivalence point, all of the hydrocyanic acids have reacted, so the concentration of hydrogen cyanide and hydronium ions is zero. The concentration of hydroxide ions can be used to calculate the concentration of hydronium ions using the equation:
Kw = [H3O+][OH-]
where Kw is the ion product constant for water, which has a value of 1.0 x 10^-14 at 25°C.
Rearranging the equation gives:
[H3O+] = Kw / [OH-]
= 1.0 x 10^-14 / 0.489
= 2.04 x 10^-14 M
Taking the negative logarithm of this value gives:
pH = -log[H3O+]
= -log(2.04 x 10^-14)
= 13.69
To learn more about barium hydroxide
https://brainly.com/question/30888146
#SPJ4
When Pt metal is used as a catalyst for the previous reaction, we see that the mechanism changes and the reaction is much faster. The activation energy is found to be 98.4 kJ mol-1 with the catalyst at room temperature. How much would you have to raise the temperature to get the catalyzed reaction to run 100 times faster than it does at room temperature with the catalyst? Please answer in °C.
The temperature should be raised by 28.15°C to run 100 times faster than it does at room temperature with the catalyst.
How to find temperature of a catalytic reaction?To determine the temperature increase needed to make the catalyzed reaction run 100 times faster, we can use the Arrhenius equation:
[tex]k_{2}[/tex]/[tex]k_{1}[/tex] = e^(-Ea/R * (1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex])
Where [tex]k_{1}[/tex] and [tex]k_{2}[/tex] are the rate constants at temperatures [tex]T_{1}[/tex] and [tex]T_{2}[/tex], Ea is the activation energy (98.4 kJ mol-1), and R is the gas constant (8.314 J [tex]K^{-1}[/tex] [tex]mol^{-1}[/tex]).
Since we want the reaction to be 100 times faster, k2/k1 = 100. Now we can rearrange the equation and solve for [tex]T_{2}[/tex]:
1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex] = -R * ln(100)/Ea
Assuming room temperature ([tex]T_{1}[/tex]) is 298 K (25°C), we can plug in the values:
1/[tex]T_{2}[/tex] - 1/298 = -8.314 * ln(100)/98,400
1/[tex]T_{2}[/tex] = 1/298 + (8.314 * ln(100)/98,400)
[tex]T_{2}[/tex] = 1 / (1/298 + (8.314 * ln(100)/98,400))
Now, calculate the value of [tex]T_{2}[/tex]:
[tex]T_{2}[/tex] ≈ 326.3 K
To convert [tex]T_{2}[/tex] to °C, subtract 273.15:
[tex]T_{2}[/tex] = 326.3 - 273.15 ≈ 53.15°C
Therefore, you would need to raise the temperature by approximately 28.15°C (53.15 - 25) to make the catalyzed reaction run 100 times faster.
To know more about Arrhenius Equation:
https://brainly.com/question/16994409
#SPJ11
What is the concentration of nitrate ions. If equal volume of 1M NaNO3 and 1 M KCL are mixed?
The concentration of nitrate ions after mixing equal volumes of 1M NaNO3 and 1M KCl is 0.5M.
How to find the concentration of nitrate ions ?When equal volumes of 1M NaNO3 and 1M KCl are mixed, the nitrate ions (NO3-) and potassium ions (K+) will undergo a cation-anion exchange reaction to form potassium nitrate (KNO3) and sodium chloride (NaCl) as follows:
NaNO3 + KCl -> KNO3 + NaCl
The concentrations of Na+ and Cl- ions will remain unchanged after the reaction because they are spectator ions. However, the concentrations of NO3- and K+ ions will change.
Since the initial concentration of both NaNO3 and KCl is 1M, the initial concentration of NO3- is also 1M.
After the reaction, the moles of NO3- will be equal to the moles of K+ ions formed, which is 1/2 the initial concentration of KCl or 0.5M.
Therefore, the concentration of nitrate ions after mixing equal volumes of 1M NaNO3 and 1M KCl is 0.5M.
Learn more about concentration here : brainly.com/question/26811246
#SPJ1
if 4.36 mol of potassium phosphate react, how many grams of barium phosphate are produced?
If 39.5 g AlCl3 is produced, how many grams of HCl was used in the reaction?
Answer:
400.87g of barium phosphate and 32.4g of HCL
Explanation:
The balanced chemical equation for the reaction between potassium phosphate and barium nitrate is:
3 K3PO4 + 4 Ba(NO3)2 → 12 KNO3 + Ba3(PO4)2
According to the stoichiometry of the equation, for every 3 moles of potassium phosphate, 1 mole of barium phosphate is produced. Therefore:
1 mol Ba3(PO4)2 = 3 mol K3PO4
To convert the given quantity of potassium phosphate to moles, we can use its molar mass:
4.36 mol K3PO4 = 4.36 mol × 212.27 g/mol = 925.5912 g
Now we can use the stoichiometry to calculate the amount of barium phosphate produced:
1 mol Ba3(PO4)2 = 3 mol K3PO4
1 mol Ba3(PO4)2 = 3/4 mol Ba(NO3)2 (from the balanced equation)
Therefore, the amount of barium phosphate produced is:
4.36 mol K3PO4 × 1 mol Ba3(PO4)2 / 3 mol K3PO4 × 4 mol Ba(NO3)2 / 3 mol Ba3(PO4)2 × 601.93 g/mol Ba3(PO4)2 = 400.87 g
Therefore, 400.87 grams of barium phosphate are produced.
We need to know the balanced chemical equation for the reaction in order to determine the stoichiometry of the reactants and products. Let's assume that the reaction is:
2 Al + 6 HCl → 2 AlCl3 + 3 H2
This equation tells us that 6 moles of HCl are required to produce 2 moles of AlCl3. The molar mass of AlCl3 is:
1 Al atom × 26.98 g/mol + 3 Cl atoms × 35.45 g/mol = 133.34 g/mol
Therefore, 39.5 g of AlCl3 represents:
39.5 g ÷ 133.34 g/mol = 0.296 moles of AlCl3
Since the reaction produces 2 moles of AlCl3 for every 6 moles of HCl, we can use a ratio to find the number of moles of HCl required:
0.296 moles AlCl3 × (6 moles HCl / 2 moles AlCl3) = 0.888 moles HCl
Finally, we can convert the number of moles of HCl to grams:
0.888 moles HCl × 36.46 g/mol = 32.4 g HCl
Therefore, 32.4 g of HCl was used in the reaction.
calculate the osmotic pressure (in atm) at 17.4 degrees c of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution.
The osmotic pressure of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution at 17.4°C can be calculated using the formula: Osmotic Pressure (atm) = Molarity (M) × Gas Constant (R) × Temperature (T).
Molarity = (Mass of Solute/ Molar Mass of Solute) / Volume of Solution
= (7.19 g / 180.2 g/mol) / 18.9 ml
= 0.3999 M
Gas Constant (R) = 0.08206 liter atm/mol K
Temperature (T) = 17.4°C + 273.15 = 290.55 K
Therefore, Osmotic Pressure (atm) = 0.3999 M × 0.08206 liter atm/mol K × 290.55 K
= 0.983 atm
The osmotic pressure of a solution is the hydrostatic pressure required to balance the osmotic pressure of a solution. This is determined by the concentration of the solute molecules, temperature, and the properties of the solvent. The osmotic pressure of a solution can be used to determine the boiling point, vapor pressure, and vapor pressure of a solution. Additionally, it is important for the transport of substances across biological membranes, as well as for the stability of colloidal suspensions.
In summary, the osmotic pressure (in atm) of a solution made by dissolving 7.19 g of glucose in 18.9 ml of solution at 17.4°C can be calculated using the formula: Osmotic Pressure (atm) = Molarity (M) × Gas Constant (R) × Temperature (T), and is equal to 0.983 atm.
To know more about osmotic pressure click on below link :
https://brainly.com/question/15501096#
#SPJ11
acrylic acid, whose formula is or , is used in the manufacture of plastics. a 0.76 m aqueous solution of acrylic acid has a ph of 2.19. what is for acrylic acid?
Acrylic acid, whose formula is CH₂=CHCOOH, has a pKa of 4.76.
This means that in a 0.76 m aqueous solution of acrylic acid, the majority of the acid will exist in its undissociated (protonated) form, with a pH of 2.19. This indicates that the solution is very acidic and the hydrogen ion concentration is very high.
Acrylic acid has a pKa of 4.76, which means that at a pH of 4.76, the acid will exist in a 1:1 ratio of its protonated (undissociated) and deprotonated (dissociated) forms.
In a 0.76 m aqueous solution of acrylic acid, the majority of the acid will exist in its undissociated form, which means that the hydrogen ion concentration is very high and the solution is very acidic with a pH of 2.19.
The presence of the hydrogen ion concentration allows the acid to be used in the manufacture of plastics.
To know more about Acrylic acid click on below link:
https://brainly.com/question/30889057#
#SPJ11
when aqueous solutions of fecl3 and (nh4)2s are mixed a solid precipitate forms. what is the correct formula for the precipitate?
The correct formula for the precipitate formed when aqueous solutions of [tex]FeCl_{3}[/tex] and [tex](NH_{4})2S[/tex] are mixed is [tex]Fe_{2}S_{3}[/tex].
What is a precipitate?А precipitаte is аn insoluble solid thаt forms from а chemicаl reаction in а solution. It hаppens when two solutions thаt contаin soluble sаlts аre mixed, аnd а new insoluble sаlt is formed. In this cаse, when аqueous solutions of [tex]FeCl_{3}[/tex] аnd [tex](NH_{4})2S[/tex] аre mixed, а solid precipitаte forms.
To determine the correct formulа for the precipitаte, we need to consider the reаction thаt tаkes plаce during mixing. Aqueous solutions of [tex]FeCl_{3}[/tex] and [tex](NH_{4})2S[/tex] react to form [tex]Fe_{2}S_{3}[/tex] (Iron(III) sulfide) and [tex]6NH_{4}Cl[/tex] (Ammonium chloride) as shown below:
[tex]Fe_{2}S_{3}[/tex] (aq) + 3 [tex](NH_{4})2S[/tex] (aq) → [tex](NH_{4})2S[/tex] (s) + [tex]6NH_{4}Cl[/tex] (aq)
So the correct formula for the precipitate formed is [tex]Fe_{2}S_{3}[/tex].
For more information about precipitate refers to the link: https://brainly.com/question/29762381
#SPJ11
in a certain molecule, the central atom has one lone pair and five bonds. what will the electron pair geometry and molecular structure be?
In the certain molecule, the central atom has the one lone pair and five bonds. The electron pair geometry is the square pyramidal and molecular structure is square pyramidal.
The square pyramidal has the 5 bonds and the 1 lone pair. The 1 lone pair will be sits on the bottom of the molecule and that will causes the repulsion of the rest of bonds. This will result in that the bond angles are the all slightly lower than the 90°.
The molecule with the five bonding pairs and the one lone pair is designated as the AX5E and it has the total of the six electron pairs. The electron pair geometry is the square pyramidal and molecular geometry is square pyramidal.
To learn more about geometry here
https://brainly.com/question/28189901
#SPJ4
Compute the wavelength of the radio waves from the following stations.
(a) an AM station operating at a frequency of 830 kHz
m
(b) an FM station with a frequency of 93.9 MHz
m
Answer:
a. 3.19 m
b. 361.45 m
Explanation:
wavelength = speed of light ÷ frequency
speed of light = 3.00 x 10^8 m/s
AM is KILOhertz
830 kHz = 830,000 Hz
FM is MEGAhertz
93.9 MHz = 93,900,000 Hz
a.
wavelength = 3.00 x 10^8 m/s ÷ 830,000 Hz =
361.45 m
b.
wavelength = 3.00 x 10^8 m/s / 93,900,000 Hz = 3.19 m
a compound of bromine and fluorine is used to make uf6, which is an important chemical in processing and reprocessing of nuclear fuel. the compound contains 58.37 mass percent bromine. determine its empirical formula.
Answer: The compound of bromine and fluorine used to make UF6 has an empirical formula of BrF8, which contains 1 atom of bromine and 8 atoms of fluorine. This compound is composed of 58.37 mass percent bromine and 41.63 mass percent fluorine.
The compound of bromine and fluorine used to make UF6 is composed of 58.37 mass percent bromine. To determine its empirical formula, we can use the following equation:
Molecular Mass = Mass Percent Bromine/Atomic Mass Bromine * Number of Bromine Atoms + Mass Percent Fluorine/Atomic Mass Fluorine * Number of Fluorine Atoms
Using this equation, we can determine the empirical formula by rearranging the equation and making it easier to calculate. To do this, we can make all terms on the right side of the equation be a multiple of the smallest mass percent of the elements in the compound. In this case, the smallest mass percent is bromine, so we must make the fluorine mass percent be a multiple of 58.37.
58.37/Atomic Mass Bromine * Number of Bromine Atoms = Mass Percent Fluorine/Atomic Mass Fluorine * Number of Fluorine Atoms
Using this equation, we can calculate the number of bromine atoms and fluorine atoms. The atomic mass of bromine is 79.9 and the atomic mass of fluorine is 19. In this equation, the number of bromine atoms is 1, and the number of fluorine atoms is 8. This results in an empirical formula of BrF8.
In conclusion, the compound of bromine and fluorine used to make UF6 has an empirical formula of BrF8, which contains 1 atom of bromine and 8 atoms of fluorine. This compound is composed of 58.37 mass percent bromine and 41.63 mass percent fluorine.
Learn more about compounds here:
https://brainly.com/question/23334479#
#SPJ11
a patient is to receive 1 l of pn solution at 75 ml/hr. what is the rate in gtt/min if the drop set used is 20 gtt/ml?
A patient is to receive 1 l of PN solution at 75 ml/hr. The flow rate in gtt/min if the drop set used is 20 gtt/ml is 3.75 gtt/min.
What is PN solution?A PN solution is a type of electrolyte solution composed of a mixture of positive and negative ions. Such solutions are often used in various applications, such as electroplating, batteries, corrosion protection and water purification. This type of solution is also used in laboratories for chemical/electrolytic reactions.
What are electrolyte solutions?Electrolyte solutions are solutions that contain ions and can be electrically conductive. Examples of electrolyte solutions include saltwater, acids, bases, and other dissolved substances. When an electrolyte solution is placed in an electric field, the ions will be attracted to the electrodes and form a conductive path for the electric current to flow through the solution.
This is calculated by taking 75 ml/hr (which is 750 ml/hr for simplicity) and dividing it by 20 gtt/ml, which gives us 37.5 gtt/hr.
To get the rate in gtt/min, we then take 37.5 gtt/hr and divide it by 60 minutes, which gives us 3.75 gtt/min.
To know more about Flow rate, visit:
https://brainly.com/question/27880305
#SPJ1
what is the stoichiometric factor, that is the number of moles, of n a 2 s 2 o 3 x 2 sx 2 ox 3 reacting with one mole of kio3 kio3 ?
The stoichiometric factor is 6:1 that is 6 moles of [tex]Na_2S_2O_3[/tex] reacts with one mole of [tex]KIO_3[/tex]
The stoichiometric factor is a factor that shows the number of moles of a reactant or product that takes part in the chemical reaction. The balanced chemical equation provides the ratio of the reactants and products involved in a chemical reaction.
It is used to determine the stoichiometric factor which is the number of moles of a compound in a balanced equation.
The balanced equation for the given reaction is:
[tex]Na_2S_2O_3 + 2KIO_3 + H_2O \rightarrow I_2 + 2NaHSO_4 + 2KHSO_4[/tex]
First, write the balanced equation of the reaction between
[tex]Na_2S_2O_3 \times 2H_2O\ and\ KIO_3.KIO_3 + 6Na_2S_2O_3 + 9H_2O \rightarrow 3I_2 + 6Na_2SO_4 + 9H_2SO_4[/tex]
So, the stoichiometric factor, that is the number of moles, of [tex]Na_2S_2O_3\times 2H_2O[/tex] reacting with one mole of [tex]KIO_3[/tex] is 6 moles.
Therefore, 6 moles of [tex]Na_2S_2O_3\times 2H_2O[/tex] are needed to react with one mole of [tex]KIO_3[/tex].
To learn more about stoichiometry refer: https://brainly.com/question/15097460
#SPJ11
What volume of oxygen gas reacts if 56.1 grams of magnesium oxide are produced, according to the reaction below at STP? 2Mg(s) + O2(g) —> 2MgO(s)
Answer: 15.56 L of oxygen gas reacts to produce 56.1 grams of magnesium oxide at STP.
Explanation:
The given chemical equation represents the reaction between magnesium (Mg) and oxygen (O2) to form magnesium oxide (MgO) with a stoichiometric ratio of 2:1 between Mg and O2. This means that for every 2 moles of Mg that reacts, 1 mole of O2 is consumed.
The molar mass of MgO is 40.3 g/mol (24.3 g/mol for Mg + 16.0 g/mol for O). Therefore, the number of moles of MgO produced can be calculated as follows:
Number of moles of MgO = Mass of MgO / Molar mass of MgO
Number of moles of MgO = 56.1 g / 40.3 g/mol
Number of moles of MgO = 1.39 mol
Since the stoichiometric ratio of Mg to O2 is 2:1, we can calculate the number of moles of O2 consumed as follows:
Number of moles of O2 = (Number of moles of MgO) / 2
Number of moles of O2 = 1.39 mol / 2
Number of moles of O2 = 0.695 mol
At STP (standard temperature and pressure), one mole of any ideal gas occupies 22.4 L. Therefore, the volume of O2 consumed can be calculated as follows:
Volume of O2 consumed = Number of moles of O2 x 22.4 L/mol
Volume of O2 consumed = 0.695 mol x 22.4 L/mol
Volume of O2 consumed = 15.56 L
Therefore, 15.56 L of oxygen gas reacts to produce 56.1 grams of magnesium oxide at STP.
What type of radiation would have a wavelength of 10 -2 m?
A wavelength of [tex]10^{-2}[/tex] meters corresponds to a frequency of about 3 × [tex]10^{14}[/tex] Hz, which places it in the microwave range of the electromagnetic spectrum.
Therefore, the type of radiation that would have a wavelength of [tex]10^{-2}[/tex]meters is a microwave radiation. Microwaves are a type of electromagnetic radiation that has a longer wavelength than visible light but shorter than radio waves. They are commonly used in communication, heating, and cooking applications. In particular, microwave radiation is used in microwave ovens to heat food by causing water molecules to vibrate, which generates heat. Additionally, microwave radiation is used in telecommunications, such as mobile phones and satellite communications.
To know more about corresponds click here:
brainly.com/question/26104021
#SPJ4
which combination of elements are required for a compound to be considered organic? multiple choice carbon and oxygen carbon and hydrogen sodium and carbon nitrogen and oxygen
The combination of elements that are required for a compound to be considered organic are carbon and hydrogen. The correct answer among the given options is carbon and hydrogen.
Organic compounds are the fundamental components of life and are classified by the presence of carbon atoms, which are covalently linked to one another and to other elements such as oxygen, nitrogen, and sulfur, as well as by the lack of ionic bonding.
To summarize, an organic compound is a compound that contains carbon atoms bonded to hydrogen atoms, among other elements, in a covalent bond. The majority of organic compounds contain a carbon-carbon bond, which is the foundation of organic chemistry.
The following are some examples of organic compounds:
Methane, CH4
Ethanol, C2H5OH
Ethanoic acid, CH3COOH
Acetone, (CH3)2CO
Amino acid glycine, NH2CH2COOH
As a result, the correct combination of elements that are required for a compound to be considered organic are carbon and hydrogen.
For more such questions on elements, click on:
https://brainly.com/question/28424113
#SPJ11
why is it recommended to keep the reaction temperature low and the addition of nitric aci-dulfuric acid mixture out slowlt
It is recommended to keep the reaction temperature low and the addition of nitric acid sulfuric acid mixture out slow because the reaction between the two is exothermic, which means it produces a lot of heat. The high temperature produced can result in an explosion, which can be dangerous.
The exothermic nature of the reaction causes the formation of nitronium ions, which act as an electrophile to nitrate the organic substrate. If the temperature is too high, the nitronium ions can form too fast, causing the reaction to run out of control. Additionally, the addition of the nitric acid sulfuric acid mixture should be slow to avoid the formation of nitrogen dioxide gas.
Nitrogen dioxide is produced when the nitric acid reacts with atmospheric nitrogen oxide. This can lead to a brown or yellow coloration of the reaction mixture and, in high concentration, can be toxic. By adding the mixture slowly, the concentration of nitrogen dioxide is reduced, making the reaction safer.
In conclusion, it is crucial to keep the reaction temperature low and add the nitric acid sulfuric acid mixture slowly to prevent an explosion from the high temperature produced by the exothermic reaction. The slow addition of the mixture also reduces the concentration of nitrogen dioxide, making the reaction safer.
To know more about Exothermic refer here:
https://brainly.com/question/3971357#
#SPJ11
If 4. 85 g of product are actually formed, what is the percent yield of carbon dioxide?
The percent yield of carbon dioxide is 66.90%.
To calculate the percent yield of carbon dioxide, we need to compare the actual yield of carbon dioxide with the theoretical yield of carbon dioxide that would be expected from the balanced chemical equation.
Let's say the chemical equation for the reaction that produces carbon dioxide is:
2 A + 3 B → 2 CO2 + C
Assuming that carbon dioxide is the only product, we can calculate the theoretical yield of carbon dioxide from the given amount of reactants used in the reaction.
If we know the mass of the limiting reactant that was used, we can use stoichiometry to calculate the theoretical yield of carbon dioxide.
Let's say that we used 5.0 g of reactant A, and that reactant A is the limiting reactant. If we know the molar mass of reactant A and the stoichiometric coefficients of the reactants and products in the equation, we can calculate the theoretical yield of carbon dioxide:
Calculate the number of moles of reactant A used:
moles of A = mass of A / molar mass of A
Use the stoichiometry of the equation to calculate the number of moles of carbon dioxide produced:
moles of CO2 = (moles of A) x (2 moles of CO2 / 2 moles of A)
Calculate the mass of carbon dioxide produced:
mass of CO2 = moles of CO2 x molar mass of CO2
Once we have calculated the theoretical yield of carbon dioxide, we can calculate the percent yield by dividing the actual yield by the theoretical yield and multiplying by 100:
percent yield = (actual yield / theoretical yield) x 100
Let's assume that the theoretical yield of carbon dioxide is calculated to be 7.25 g based on the amount of reactants used. If the actual yield of carbon dioxide is measured to be 4.85 g, the percent yield can be calculated as follows:
percent yield = (4.85 g / 7.25 g) x 100
percent yield = 66.90%
Learn more about percent yield
https://brainly.com/question/17042787
#SPJ4
use maxwell relations to show how the enthalpy of an ideal gas changes with volume held at constant temperature. show your work
Maxwell's relations can be used to show how the enthalpy of an ideal gas changes with volume held at constant temperature. This is how it's done:
Using the fundamental equation, dU = TdS - PdV, and taking the partial derivative with respect to volume,
we get:dU/dV = T(dS/dV) - P This equation represents the relationship between internal energy and volume for a constant temperature process.
Using the Maxwell relation, dS/dV = (dP/dT)/T,
we can substitute it in the previous equation: dU/dV = T(dP/dT)/T - PdU/dV = (dP/dT) - P
This equation represents the relationship between internal energy and volume for a constant temperature process.
The enthalpy, H = U + PV, can then be used to express the result as:dH/dV = dU/dV + P + V(dP/dT)dH/dV = (dP/dT)V
The above equation shows how the enthalpy of an ideal gas changes with volume held at constant temperature. Therefore, we can conclude that the enthalpy of an ideal gas is dependent on the temperature and the pressure of the gas.
To learn more about "Maxwell relation" here:
https://brainly.com/question/28956380#
#SPJ11
how long will one iv bag last for the following medication order? potassium chloride 10 meq in d5w 50 ml iv q 24h rate: 50 ml/hr
The one IV bag of potassium chloride 10 meq in d5w 50 ml IV should last 24 hours and is because the rate is set at 50 ml/hr, so after 24 hours, the full 50 ml of the IV bag will have been infused.
To calculate the duration of the IV bag, you need to divide the total volume (50 ml) by the rate (50 ml/hr). This gives you a duration of 1 hour.
To convert this to 24 hours, you need to multiply the result by 24, giving you a total of 24 hours.
Therefore, the one IV bag of potassium chloride 10 meq in d5w 50 ml IV should last for 24 hours when given at a rate of 50 ml/hr.
To know more about potassium chloride click on below link:
https://brainly.com/question/22528097#
#SPJ11
how many grams of h2o will be formed when 32.0 g h2 is mixed with 12.0 g of o2 and allowed to react to form water?
When 32.0 g of H2 and 12.0 g of O2 are mixed and allowed to react to form water, the end result will be 44.0 g of H2O.
This is because the equation for the reaction is 2H2 + O2 = 2H2O, so for every two grams of H2 that are present, one gram of O2 must be present to balance the equation. Therefore, 32.0 g of H2 and 12.0 g of O2 will result in 44.0 g of H2O.
To solve this problem, first calculate the amount of H2 and O2 needed to create the desired amount of H2O. Using the equation, the ratio of H2 to O2 is 2:1, so the total amount of O2 needed to react with the given amount of H2 is 16.0 g (32.0 g of H2 divided by 2). Next, calculate the amount of H2O that will be produced. To do this, use the equation 2H2 + O2 = 2H2O, so the total amount of H2O produced is twice the amount of H2 and O2, or 44.0 g (32.0 g of H2 + 16.0 g of O2 = 48.0 g, then divided by 2 = 24.0 g).
Therefore, when 32.0 g of H2 and 12.0 g of O2 are mixed and allowed to react to form water, the end result will be 44.0 g of H2O.
For more such questions on H2O
https://brainly.com/question/26709403
#SPJ11