A stall occurs when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing

Answers

Answer 1

A stall happens when the smooth airflow over the unmanned airplane`s wing is disrupted, and the lift degenerates rapidly. This is caused when the wing "exceeds its critical angle of attack."

The angle of attack refers to the angle at which the airplane's wing meets the air that is flowing over it. When an airplane actually is taking off, it is lifting the nose up into the air. And, if that nose continues to rise ultimately it reaches a point where the air is not able to smoothly flow over the wing, causing the airplane to drop. And, this is the point when the airplane exceeds its critical angle of attack.

Exceeding the critical angle of attack is known to be a stall. This has no concern with the engine stalling, it just concerns with the wings not producing enough lift to keep the airplane in the air.

You can learn more about critical angle of attack at

https://brainly.com/question/13209325

#SPJ


Related Questions

Technician A says it is your duty to fight a fire to the death to save property. Technician B says do not fight a fire unless you can do so safely. Who is correct

Answers

Tech B is correct, as the firefighters should not risk their lives unless they can do so safely.

What is a Firefighter?

A firefighter, also known as a fireman, is a highly trained individual who works to fight and extinguish fires. They also work to prevent fires, serve as emergency medical technicians (EMT), and investigate fire causes.

Because a firefighter is almost always the first official "on the scene" of a fire, car accident, or other emergency, they are sometimes referred to as "first responders." Some firefighters work as professionals, while others volunteer in their communities.

There are four primary responsibilities and duties: putting out fires, rescuing and caring for the sick and injured, working to prevent future fires, and investigating the causes of fires, particularly if arson is suspected.

To know more about Firefighter, visit: https://brainly.com/question/14252935

#SPJ4

What is the difference between cinema and theatre ?? I want the difference

Answers

Answer:

The main difference between theatre and cinema is that theatre involves live performances like plays, opera, ballet, and musical theatre, while cinema involves films.

Theatre is a building or outdoor area that houses dramatic presentations, and stage entertainments. In British English, cinema refers to a building that contains an auditorium for viewing films – this is equivalent for movie theatre in American English.

Explanation:

Similarities between theatre and movies

Both movies and theatre focus on social evils and problems and represent them to society through play and cinema. In both, the purpose of the cases is to bring positive changes in society. ...

Both theater plays and movies are forms of entertainment that allow an audience to enter different worlds. ...

Both theater plays and movies are forms of entertainment

Answer:

Theatre typically involves live performances, while cinema usually contains a moving picture that is prerecorded or premade and being projected.

Examples of theatre include:

BalletsPlaysMusicals

Examples of cinema include:

MoviesShort Films

To learn more about the difference between cinema and theatre, check out the link below:

https://brainly.com/question/26197760

There are initially 500 rabbits (x) and 200 foxes (y) on Farmer Oat’s property near Riça, Jofostan. Use Polymath or MATLAB to plot the concentration of foxes and rabbits as a function of time for a period of up to 500 days. The predator–prey relationships are given by the following set of coupled ordinary differential equations:


dx/dt= k1x-k2x. Y

dy/dt= k3x. Y-k4y


Constant for growth of rabbits k1 = 0. 02

Constant for death of rabbits k2 = 0. 00004/(day × no. Of foxes)

Constant for growth of foxes after eating rabbits k3 = 0. 0004/(day × no. Of rabbits)

Constant for death of foxes k4 = 0. 04 What do your results look like for the case of k3 = 0. 00004/(day × no. Of rabbits) and tfinal = 800 days?

Also, plot the number of foxes versus the number of rabbits. Explain why the curves look

Answers

The curves look like a sine wave, with the number of rabbits and foxes both oscillating around a steady-state equilibrium. The presence of the constants for growth and death of both rabbits and foxes.

What is curves?
Curves
is an international fitness franchise targeting women. It offers a 30-minute workout that combines strength training, cardio, and stretching. The circuit-style program is designed to help members reach their fitness goals while providing a supportive, non-threatening environment. The program also includes nutrition counseling, wellness education, and support from certified coaches.

This is because the predator-prey relationships in this system are cyclical, with the fox population increasing as the rabbit population increases, and vice versa.

To learn more about curves
https://brainly.com/question/13445467

#SPJ4

A flow i decribed by velocity field V=ayibxj where a = 2 (m/) and b = 1 (1/) , coordinate are meaured in meter. A) Obtain the equation for the treamline paing through the point (2,5). B) At t=2 , what are the coordinate of the particle that paed through point (0,4) at t=0. C) At t=3 , what are the coordinate of the particle that paed through point (1,4. 25) 2 econd earlier

Answers

The equation for the streamline passing through point (2,5) is y-5=b/a(x-2).

What is streamline?

Streamlining is a process of simplifying or improving a process or system to increase efficiency, reduce complexity, and reduce costs. It can involve reorganizing, restructuring, rearranging, or redefining a system, procedure, or process to make it more efficient and productive.

B) At t=2, the coordinate of the particle that passed through point (0,4) at t=0 is (6,7). This is because since the velocity field is V = ayibxj, the particle will experience a displacement of 2a in the x-direction and 2b in the y-direction in the span of 2 seconds. Thus, the displacement of the particle is (2a,2b) = (4,2). Adding this to the initial position (0,4), the new position of the particle is (4,6).
C) At t=3, the coordinate of the particle that passed through point (1,4.25) 2 seconds earlier is (7.25,6.25). This is because since the velocity field is V = ayibxj, the particle will experience a displacement of 3a in the x-direction and 3b in the y-direction in the span of 3 seconds. Thus, the displacement of the particle is (3a, 3b) = (6,3). Adding this to the initial position (1,4.25), the new position of the particle is (7,7.25).

To learn more about streamline
https://brainly.com/question/22453879
#SPJ4

What are the two major grains found on ALL lumber?

Answers

The two major grains found on all lumber are the longitudinal grain and the radial grain.

The longitudinal grain runs parallel to the length of the board, while the radial grain runs perpendicular to the length of the board.

What is the Longitudinal Grain?

The longitudinal grain, also known as the "edge grain," runs parallel to the length of the board.

This grain is created by the growth rings of the tree, which are formed by the tree's annual growth.

When a tree is cut down and milled into lumber, the edge grain is exposed on the edges of the board. This grain is typically considered to be the strongest and most stable of the two grains.

Read more about grain here:

https://brainly.com/question/1394041

#SPJ1

Tech A says that a safety data sheet (SDS) contains information on procedures to repair a vehicle. Tech B says that you only need an SDS after an accident occurs. Who is correct

Answers

According to the question of vehicle, tech B is correct.

What is vehicle?
Vehicle
is a general term used to describe any mode of transportation that carries people or goods from one place to another. Examples of vehicles include cars, buses, boats, planes, trains, bicycles, and motorcycles. Vehicle is a noun that can refer to any type of transportation, either for people or for cargo. Vehicles are powered by various sources, such as fuel, electricity, pedals, or sails.  

An SDS is used to document any hazardous materials that may have been released during an accident, as well as to provide instructions for cleaning up and disposing of the hazardous material. It does not provide instructions on how to repair a vehicle.

To learn more about vehicle
https://brainly.com/question/28539698

#SPJ4

A rigid pavement on a new interstate with 3 lanes in each direction has been conservatively designed with a 12-inch slab, an Ec of 5.5 million psi, a concrete modulus of rupture of 700 psi, a load transfer coefficient of 3.0, an initial PSI of 4.5, and a TSI of 2.5. The overall standard deviation is 0.35, the modulus of subgrade reaction is 290 lb/in3, and the drainage coefficient is 0.9. The pavement was designed for 600 30-kip tandem axles per day and 1400 20-kip single axle loads per day total for all 3 lanes. If the desired reliability is 90%, how long will the pavement last in years

Answers

The pavement will last between 41 and 50 years with a reliability of 90%.

A road surface, also known as pavement, is a durable surface material that is laid down on an area intended to support vehicular or pedestrian traffic, such as a road or walkway.

First, calculate the number of equivalent single axle loads (ESALS):

ESALS = 600*30 + 1400*20 = 55600.

Next, calculate the design life (L) using the formula: L =

(ESALS/18000)^(1/TSI) * (Ec/PSI)^(-1/2*SD).

Plugging in the values,

L = (55600/18000)^(1/2.5) * (5.5 x 10^6/4.5)^(-1/0.7) = 41.8.

Lastly, calculate the reliability (R) using the formula:

R = (1-LT^(-1/2))*100.

Calculating for a pavement life of 41 years and 50 years gives a reliability of 90% for both values.
For more questions like Pavement click the link below:

https://brainly.com/question/14249997

#SPJ4

The system ________ can communicate with each other and adjust system operation to match the heat load and operating conditions.

Answers

The system automatically can communicate with each other and adjust system operation to match the heat load and operating conditions.

What is system operation?
System operation
is the process of managing, controlling, and monitoring the operations of a computer system or network. It encompasses the planning and implementation of system operations, including the coordination of hardware, software, and communication components. System operation includes activities such as system configuration, system monitoring, performance tuning, system backup, system recovery, and system maintenance. System operation ensures that the system or network is secure, reliable, and available to users. It also involves troubleshooting and responding to incidents, analyzing system performance, and identifying areas for improvement. System operation is critical to the success of any organization, as it ensures the availability, reliability, and security of the system or network.

To learn more about system operation
https://brainly.com/question/29990235

#SPJ4

Question 4: Princeton has a longstanding commitment to service and civic engagement. Tell us how your story intersects (or will intersect) with these ideals.

Answers

Princeton has a long tradition of service and civic engagement, and I am proud to be part of this legacy.

I have always been passionate about giving back to my community and helping those in need. I have participated in volunteer programs to help feed the homeless, tutor disadvantaged children, and provide other forms of community service.

I am also committed to making a positive impact on the environment by taking part in various initiatives to reduce my carbon footprint. I am currently a member of the Princeton Environmental Action Group and will be taking part in their upcoming campaigns to reduce waste and promote sustainable practices on campus.

I am also part of the Princeton Student Climate Initiative, which is dedicated to raising awareness about climate change and advocating for policy changes that will help protect the environment. I look forward to continuing my commitment to service and civic engagement during my time at Princeton, and I know that by working together, we can make a positive difference in our community.

Learn more about Princeton :

https://brainly.com/question/30076023

#SPJ4

A force F having a magnitude of F = 165 N acts along the diagonal of the parallelepiped. Determine the moment of F about point A, using MA =rB x F and MA =rC x F.

Answers

Therefore, (-26.46i-52.92k) Nm is the answer to the presented problem of force.

What is a force, exactly?

The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.

Which four primary forces are there?

Any of the four fundamental forces in physics—gravitational, electromagnetic, strong, and weak—that control how things or particles interact as well as how some particles decay—is referred to as a fundamental force, also known as a fundamental interaction. These fundamental forces are the source of all known natural forces.

to know more about force here:

brainly.com/question/13191643

#SPJ1

It is desired to develop a strong Aluminum-based alloy with a shear strength on the order of G/100 by precipitation hardening, where G is the shear modulus. Calculate the necessary precipitate spacing, and estimate the required percentage of the precipitate phase. Assume that the precipitate phase consists of spherical particles of radius of R=40 nm with centers uniformly distributed in simple cubic lattice. Does it matter whether the precipitates strain the matrix locally around the interface or not?

Answers

Answer:

a) L = 50.01 nm

b) 99.98%

Explanation:

Determine the necessary precipitate spacing  and estimate the required percentage of precipitate phase

Given that the shear strength = G/100 by precipitation hardening

G = shear modulus

Radius of particles = 40 nm

attached below is the detailed solution

a) precipitate spacing ( L ) = √( 2π / f )  * R₁

                                       = √ ( 2π / 0.00719956 ) * 1.693 nm

hence L = 50.01 nm

b) Determine The percentage of precipitate phase that is required

( precipitation strength  /  peak strength ) * 100

= ( 18.4583 / 18.4604 ) * 100

= 99.98%

Find the time function corresponding to each of the following Laplace transforms using partial fraction expansions: (a) = F(s) = 1/s(s+1) (b) F(s) = 5/s(s+1)(s+5) (c) F(s) = 3s+2/s^2 + 2s + 10

Answers

The time function corresponding to each of the following Laplace transforms using partial fraction expansions will be:

(a) f(t) = e^(-t) + te^(-t)

(b) f(t) = 5e^(-t) + 5te^(-t) - 10e^(-5t)

(c) f(t) = 3e^(-t) + (2t+1)e^(-t) - 2e^(-2t) - 5te^(-2t)

What is fraction?
A fraction is a type of mathematical expression that represents a part of a whole. It is written as a ratio of two numbers, with a line separating them. For example, the fraction 1/2 represents one part of a whole that has been divided into two equal parts. Fractions are used to express amounts that are less than one, such as a half, a quarter, or a third. They can also be used to express amounts greater than one, such as two thirds, three quarters, or four fifths. Fractions are used in many different areas of mathematics, such as addition, subtraction, multiplication and division.

To learn more about fraction
https://brainly.com/question/20038994

#SPJ4


The statements below refer to the design and operation of the power sub-system on a spacecraft. Select all those statements that are correct.

Answers

the battery and ODC input voltages, as well as the main parameters for the power source, fireworks, relays, anti-static resistances, etc. The statements below refer to the design and operation of the power sub-system on a spacecraft.

How do spaceship electric power systems work?

Solar panels on these spacecraft convert solar energy into the electricity they require for propulsion. The electricity generated by the solar panels is used to recharge a battery within the spacecraft. These batteries can power the spaceship even as it is traveling away from the sun.

What make up a spacecraft's subsystems?

The engine, temperature management, power and power distribution, attitude control, telemetry command and control, transmitters/antenna, computers/on-board processing/software, and structural components are only a few of the many subsystems that make up a spaceship bus.

To know more about spacecraft's subsystems visit:-

https://brainly.com/question/29610872

#SPJ1

What is the 8-digit binary value of the last octet of the IPv4 address 172.17.10.7? O 00000111 O 01100110 O 00001111 O 00000110 Question 10 1 pts A site administrator has been told that a particular network at the site must accommodate 126 hosts. Which subnet mask would be used that contains the required number of host bits? 255.255.255.128 255.255.255.0 O 255.255.255.224 O 255.255.255.240 Question 11 1 pts In which alternative to DHCPv6 does a router dynamically provide IPv6 configuration information to hosts? O SLAAC O ARP O ICMPv6 O EU1-64

Answers

The router will be informed of the appropriate host ID by the last octet, which is the octet of the sub-net mask 255.255.255.0.

In the IPv4 component of the address, one octet is referred to as x and is a decimal value between 0 and 255. Periods are used to separate the octets. Three periods and four octets are required in the IPv4 component of the address. People may have also heard the term "octets" used to describe the four numbers that make up an IP address. The right name for the four distinct digits that make up an IP address is an octet. The third octet of sub-netting is used to specify specific sub nets of network 150.150.0.0. In the example in the image, each sub-net number has a different value in the third byte, signifying that it is a separate sub-net number.

Learn more about Octets here:

https://brainly.com/question/28276191

#SPJ4

A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of

Answers

A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of curable physical deterioration.

What is Curable physical deterioration?

Curable deterioration is a type of deterioration that can be cured economically. The economic feasibility of a property is indicated if the increase in value exceeds or is equal to the anticipated cost of repairing the property. The cost of replacing or restoring the item is used as a reasonable measure of curable deterioration.

Estimating the value of items that need to be repaired, such as window replacements, repainting, weatherstripping, roof repair, loose tile fixing, faulty wiring, and heating or cooling system repairs, is part of measuring curable deterioration.

Only include the items listed above if the increase in property value will cover the cost of repairs. For example, if roof repair and loose tile repair are estimated to cost $8,000, a prospective buyer can reduce their offer price by the same amount to cover the cost of doing such repairs.

To learn more about roofs, visit: https://brainly.com/question/29517525

#SPJ4

Exactly 5. 00 mL aliquots of a solution containing Phenobarbital were measured into 50. 00ml volumetric flasks and made basic with KOH.

The following volumes of a standard solution of Phenobarbital containing 2. 00 µg/ml of Phenobarbital were then introduced into each flask and the mixture was diluted to volume: 0. 00, 0. 500,1. 000, 1. 50, and 2. 00ml.

The fluorescence of each of these solutions was measured with a fluorometer, which gave volumes of 3. 26, 4. 80, 6. 41, 8. 02, and 9. 56 respectively.


(a) Pot the data.

(b) Using the plot from (a) calculate the concentration of Phenobarbital in the unknown.

(c) Derive a least-squares equation for the data.

(d) Find the concentration of Phenobarbital from the equation in (c)

(e) Calculate a standard deviation for the concentration obtained in (d)

Answers

The data can be plotted as a standard curve. The concentration of Phenobarbital in the unknown can be determined by finding the point on the curve where the fluorescence of the solution intersects the x-axis.

Pot the data

a) The data is plotted in form of a standard curve, which is a graph of the fluorescence of the solutions versus the volume of the standard solution added.

Using the plot from (a) calculate the concentration of Phenobarbital in the unknown.

b) By drawing a line of best fit through the data points, we can find the point where the line intersects the x-axis, the x-intercept, which will give us the concentration of phenobarbital in the unknown.

Derive a least-squares equation for the data.

c) The least-squares equation is a mathematical representation of the line of best fit. It is used to find the relationship between two variables by minimizing the sum of the squared residuals between the data points and the line.

Find the concentration of Phenobarbital from the equation in (c)

d) Using the equation obtained in c), we can calculate the concentration of phenobarbital in the unknown.

Calculate a standard deviation for the concentration obtained in (d)

e) By using the residuals of the line of best fit, we can calculate the standard deviation of the concentration obtained in d). This will give us an idea of how much the concentration of phenobarbital in the unknown deviates from the actual value.

The least-squares equation can be found by fitting a line to the data points. The concentration of Phenobarbital can then be determined using this equation. The standard deviation for the concentration can be calculated using the residuals from the line of best fit.

Learn more about Phenobarbital here:

brainly.com/question/1939753

#SPJ4

Consider the velocity field v={−4yti+2xtj}m/s for the following parts

Answers

The velocity field isn't conservative, though.

What exactly is Velocity ?

Velocity is the direction at which an item is moving and serves as a measure of the rate at which its location is changing as seen from a particular point of view and as measured by a specific unit of time (for example, 60 km/h northbound). In kinematics, the area of classical physics that deals with the motion of bodies, speed is a basic idea.

A physical scalar quantity called velocity must have both a magnitude and a direction in order to be characterized. Speed is the scalar absolute value (intensity) of velocity; it is a coherent basic determinant whose quantity is measured in metres per second (m/s or m/s1) in the SI (measurement units).

To know more about Velocity
https://brainly.com/question/18084516
#SPJ4

Can space debris take out a whole state

Answers

Yes depends how big the debris is

What is the difference between contact relay and communication relay

Answers

Answer: The main difference between contact relays and communication relays is the type of signals that they are designed to handle, with contact relays being used to control the flow of electricity in a circuit and communication relays being used to transmit data or signals from one location to another.


Explanation: The main difference between contact relays and communication relays is the type of signals that they are designed to handle. Contact relays are used to control the flow of electricity in a circuit by opening and closing electrical contacts, while communication relays are used to transmit data or signals from one location to another.Contact relays are typically used in applications where it is necessary to switch electrical circuits on and off, such as in control panels and automated systems. They are usually designed to handle relatively low-frequency electrical signals and are typically not suitable for transmitting data or high-frequency signals.On the other hand, communication relays are used to transmit data or signals from one location to another, and are typically designed to handle a wide range of frequencies and data types. They can be used to transmit voice, data, and video signals over a variety of mediums, including wire, fiber optic cables, and wireless transmission.

Calculate LER for the same wing if we increase the span to 0. 245 m. By increasing the span, we also increase the glider weight to 0. 0523 newtons

Answers

The LER of the same wing is 0.21 using the chord values.

What is LER?

In agriculture, the term "land equivalent ratio" refers to the proportion of land area needed for monoculture (single-crop farming) to yield the same amount of yield as intercropping (polyculture).

The FAO defines the land equivalent ratio (LER) as the ratio of the area used for sole cropping to the area used for intercropping in order to produce an equal amount of yield at the same management level. The result is the sole-crop yields multiplied by the sum of the intercropped yield fractions.

We must use a chord, so I'm assuming that it is 0.045 m in length.

The formula provides the Area.

Area = span × chord

Area = 0.245 × 0.045

Area = 0.011 m²

We then divide the area obtained by the glider weight we obtain the final result.

LER = area / weight

LER = 0.011 / 0.0523

LER = 0.21

As a result, the Lee of the same wing is 0.21 using the chord values.

Learn more about land equivalent ratio

https://brainly.com/question/14825472

#SPJ4

Why is it critical for the upper and lower end sections of an engine to work perfectly together

Answers

Answer:

It is critical for the upper and lower end sections of an engine to work perfectly together because they are responsible for converting fuel into motion, which is necessary for the engine to operate effectively.

The upper end section of an engine includes the cylinder head and valves, which are responsible for controlling the flow of fuel and air into the engine. The lower end section of an engine includes the crankshaft, connecting rod, and pistons, which are responsible for converting the fuel's energy into rotational motion.

If the upper and lower end sections of an engine are not working perfectly together, it can lead to a variety of problems, including reduced engine performance, reduced fuel efficiency, and increased emissions. It is therefore critical for the upper and lower end sections to be carefully designed and calibrated to work together seamlessly in order to ensure the optimal performance of the engine.

Verify that the indicated function y=ϕ(x)y=ϕ(x)

is an explicit solution of the given first-order differential

equation. By considering ϕϕ simply as a function, give its domain. Then by considering ϕϕ as a

solution of the differential equation, give at least one interval II of definition.

y′=25+y2;y=5tan5xy ′ =25+y 2 ;y=5tan5x

Answers

After considering ϕϕ simply as a function, its domain is ⇒  [-4 , ∞).

What is differential equation?

When one or more functions and their derivatives are included in a mathematical equation, it is referred to as a differential equation. A function's derivatives at a given point determine how quickly the function will change.

Physicists, engineers, and biologists use it most frequently. Differential equations are primarily used to analyse solutions that satisfy the equations as well as the characteristics of the solutions. The differential equation can be solved in a variety of ways, but one of the simplest is by using explicit formulas.

y = x + 6√(x + 4)

⇒  y' = 1 + 6[ 1/(2√(x + 4))]      since d/dx xn = nxn-1 , d/dx √x = 1/(2√x)

⇒  y' = 1 + 3/√(x + 4)

(y -x)y' = (6√(x + 4))(1 + 3/√(x + 4)) = 6√(x + 4) + 18

y-x+18 = 6√(x + 4) + 18

ϕ(x) = x + 6√(x + 4)

Domain ⇒  x + 4 >= 0 ⇒  x >= -4

Domain ⇒  [-4 , ∞)

Learn more about Domain

https://brainly.com/question/28135761

#SPJ4

Which workplaces are common to both the Engineering and Technology pathway and the Science and Math pathway?


a) laboratories and ships
b) parks and radio stations
c) construction sites and zoos
d) offices and weather stations

Answers

Laboratories and ships are workplaces common to both the Engineering and Technology pathway and the Science and Math pathway.

The common workplace for both science and math pathways, with engineering and technology in laboratories and ships. Thus, option A is correct.

What is a workplace?

A workplace is given as the location or the place at which the employee are performing their jobs and tasks.

The science or technology-mediated employees are related to research where they perform the tests in laboratories, as well as the ships are the location for the engineering and the math candidates for the analysis of the studies and to perform the job.

Hence, the location in the workplace common for both engineering and technology candidates has been the laboratories and the ships. Thus, option A is correct.

Learn more about workplaces, here:

https://brainly.com/question/1406228

#SPJ2

Determine the required diameter of a steel transmission shaft 10 meters in length and material yield strength 350 MPa in order to resist a torque of up to 500 N.m. The shaft is supported by frictionless bearings at its ends. Design the shaft using the maximum shear stress theory, and selecting a factor of safety of 1.5. Neglect shaft weight.

Answers

Answer:

0.02795 m

Explanation:

Neglecting shaft weight Design the shaft using maximum shear stress theory and determine the required diameter

factor of safety = 1.5

length of shaft = 10 meters

material yield strength = 350 MPa

Torque = 500 N.m

The required shaft diameter = 0.02795 m

attached below is a detailed solution of the problem

What is a transition? A. An animation that happens on a single slide B. An outline format that uses roman numerals C. An image file imported to a title slide D. An effect that happens between slides Please select the best answer from the choices provided A B C D

Answers

Answer:

its c

Explanation:

please i want to paraphrase this paragraph please helppppppppp don't skip!!!!!!

Answers

I’m sorry but I can’t read all of it maybe you should write it in type so we can read it.

Classify the variable as nominal-level, ordinal-level, interval-level, or ratio-level measurement. Number of gallons of water in a swimming pool

Answers

The number of gallons in a swimming pool in the given question can be classified as a ratio level measurement.

What is ratio level measurement?

The highest of the four hierarchical levels of measurement is the ratio level measurement. Data recording accuracy is determined by the levels or scales of measurement. The measurement becomes more difficult as the level increases.

The features of the other 3 levels are all present in the ratio level. At the ratio level, values can take on a true zero, be categorised, ordered, have equal intervals, and more.

While interval and ratio variables are quantitative variables, nominal and ordinal variables fall under the category of categorical variables. Quantitative data allows for a much wider range of statistical tests than categorical data.

Learn more about ratio level measurement

https://brainly.com/question/14739567

#SPJ4

For the systems described by the following equations, with the input x (t) and output y(t), determine which of the systems are linear and which are nonlinear. Dy / dt + 2y (t) = x2 (t) dy / dt + 3ty (t) = t2 x (t) 3y (t) + 2 = x (t) dy / dt + y2 (t) = x (t) (dy / dt )2 + 2y (t) = x (t) dy / dt + (sin t) y (t) = dx / dt + 2x (i) dy / dt + 2y (t) = x (t) dx / dt y (t) = f 1 -infinity x (tau) d tau

Answers

The first equation is linear, the second equation is nonlinear, the third equation is nonlinear, the fourth equation is nonlinear, the fifth equation is nonlinear, and the sixth equation is nonlinear.

What is equation?
An equation is an expression that contains an equal sign and relates two or more mathematical quantities. It typically consists of constants, variables, and symbols, and can be written in different forms such as standard form, slope-intercept form, and factored form. Equations are used to describe relationships between variables, and they can be used to solve a wide range of problems, from basic arithmetic to advanced calculus and physics. Equations are also used to model real-world phenomena, such as electricity, kinematics, and quantum mechanics. By studying equations and their solutions, we can gain a deeper understanding of the physical world around us.

To learn more about equation
https://brainly.com/question/24179864

#SPJ4

Where is the airhorn of a 2014 kenworth t700?

Answers

In the front I think

Which of the following statements explain the difference between a diesel electrician and a diesel mechanic?

Answers

Option A. A diesel electrician works on the electrical systems of diesel engines, while a diesel mechanic works on the mechanical systems of diesel engines.

This means that the electrician focuses on the wiring, electronics, and computer systems, while the mechanic focuses on the engine parts, fuel systems, and other components.

Differences Between Diesel Electricians and Diesel Mechanics

A diesel electrician focuses on the wiring, electronics, and computer systems of diesel engines, while a diesel mechanic is responsible for the engine parts, fuel systems, and other components.

The electrician is trained in the electrical systems of diesel engines, and is able to diagnose, troubleshoot and repair any electrical issues. The mechanic, on the other hand, is responsible for maintaining, troubleshooting, and repairing the mechanical systems of diesel engines. This includes the engine parts, fuel systems, and other components.

Both positions require a specific set of skills, and both are necessary to ensure the efficient functioning of diesel engines.

Learn more about diesel electrician: https://brainly.com/question/8118353

#SPJ4

Other Questions
What is your sense of Duke as a university and a community, and why do you consider it a good match for you? If there's something in particular about our offerings that attracts you, feel free to share that as well. A DVD player had a $108. Price tags the store gave a 25% discount. What was the amount of the discount? 2. What types of jobs Ehrenreich categorizes as possibilities for her research inFlorida? Adolescents develop the ability to think about social issues, a concept more generally referred to as: Describe the transformation from the red figure to the blue figure. The blue figure is translated ____ units ____ and ____ units ____ from the red figure. help friends!!!!!!!!!!!! What is the universal theme in this excerpt?The abuse of powerThe inescapable of Justice The loss of innocence The consuming power of guilt Put the letters into the correct order to make worlds. Then match them to the definitions oiffce psorin hlostipa ctotgae fcatyor gtues-hsoue1. A room or building where people work at desks..2. A small hotel that is not very expensive3. A building where people are sent if they have committed a crime..4. A building where people go if they ill..5. A building where people make things, often using machines6. A small attractive house in the country.*************1. A: Excuse me, can you tell me (1) the way to how far for the station?B: Yes, sure. (2) Take/Turn left at the traffic lights and you'll see the station (3) in front / byfront of you.2. A: Excuse me, (4) is it far / can you direct to the museum?B: No. Just go (5) straight off / straight on for about half a kilometre and the museum is(6) on / at your right. To what extent did George W. Bush fulfill his domestic policy goals? which of the following statements is/are true regarding renal innervation. check all that apply- The renal plexus issues nerve fibers into the renal parenchyma.- The kidneys have only sympathetic innervation.- Sympathetic stimulation increases urine production.- Sympathetic stimulation causes the kidneys to secrete renin in response to low blood pressure.- Blood flow through the glomerular capillaries increases in response to sympathetic stimulation. During the 7 year war the British were fighting against the French in were What is the radius and diameter of the following circle How does the speakers point of view evolve between stanza 2 and stanza 5? The volume of this sphere is 4500m.Find the length of the radius, r. Describe the shape of the western gorillas handsDescribe the shape of the European moles hands Which statement best describes therelationship between the mushrooms and thelog? How did Mikhail Gorbachev's policies contribute to the collapse of communism in Eastern Europe?A. Perestroika showed communist countries that the free enterprise system had failed.B. Glasnost warned other countries that the Soviets were in control.C. Perestroika showed communist countries the strength of the Soviet economy.D. Glasnost was a signal to other countries that they could get rid of communism. Which is the equation of the given line?x = 1 y = 2x y=x y=1 (need help ASAP) The solider was promoted to captain of his ____________________ for all of his brave accomplishments.pls help soon!A. MortarB. ProtestC. ArtilleryD. Claim A cereal box is designed to hold a volume of 4096 cubic centimetres of cereal.What dimensions will minimize the cost of producing the box?