A student dissolved 0.178 grams of a solid monoprotic acid in water and then titrated it. They then performed the same calculation as you just did in question 2 to find the moles and they found that 0.00685 moles were neutralized. What is the molar mass of the unknown acid that was dissolved? (Hint: What are the units for molar mass?)

Answer: All the processes involve the release of heat.

Explanation: Note to self

Condensation, freezing and deposition release energy.

Evaporation, melting and sublimation absorb energy.

So if you have such a question first identify which process is taking place.

Answer:

the red one

Explanation:

you can see in the picture

Answer:

0.4 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

HBr + KOH —> KBr + H₂O

From the balanced equation above,

The mole ratio of the acid, HBr (nₐ) = 1

The mole ratio of the base, KOH (n₆) = 1

Finally, we shall determine the molarity of HBr. This can be obtained as follow:

Volume of acid, HBr (Vₐ) = 0.5 L

Volume of base, KOH (V₆) = 0.1 L

Molarity of base, KOH (M₆) = 2 M

Molarity of acid, HBr (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 0.5 / 2 × 0.1 = 1

Mₐ × 0.5 / 0.2 = 1

Cross multiply

Mₐ × 0.5 = 0.2

Divide both side by 0.5

Mₐ = 0.2 / 0.5

Mₐ = 0.4 M

Thus, the molarity of the HBr solution is 0.4 M

Drying and fermenting are two of the earliest techniques for food preservation. Replacement, recrystallization, permineralization, and unaltered

The term "preservation" refers to all of the procedures used to extend the useful life of archival records. The goal of preservation efforts is to stop information from being lost and to reduce physical and chemical deterioration of documents. You can manage the components in your food and consume healthy food all year round by canning, drying, and freezing.

The obvious goals of conservation are the protection of wildlife and the advancement of biodiversity. The animals we adore won't vanish into oblivion by being protected and preserved for future generations. And we can keep the ecosystem in good shape and working properly.

Learn more about preservation

https://brainly.com/question/29488142

The correct question is as follows

What are 6 types of preservations ?

The equilibrium concentration of B is 0.325 mol/L.

The correct option is B.

The equilibrium concentration of B in the given reaction is calculated below as follows:

The concentration of A at equilibrium, [A]  = 0.246 mol/L

Constructing an ICE table

          A(g)     +      2B (g)   →      C(g)

I         2 mole         3 moles           -

C      0.524            1.048            0.524

E        0.246         (3 - 1.048) / 6

From the equation of the reaction:

(2 - x) / 6L  =  0.246 mol/L

2 - x = 0.246 * 6

2 - x = 1.476

x = 2 - 1.476

x = 0.524 moles

[B] = (3 - 1.048) / 6

[B] = 0.325 mol/L

Learn more about equilibrium concentration at: https://brainly.com/question/19340344

#SPJ1

Complete question:

For the reaction given below, 2.00 moles of A and 3.00 moles of B are placed in a 6.00-L container.

A(g) + 2B(g) C(g)

At equilibrium, the concentration of A is 0.246 mol/L. What is the concentration of B at equilibrium? A) 0.246 mol/L B) 0.325 mol/L C) 0.500 mol/L D) 0.492 mol/L E) none of these

The conservation of natural resources be most effective in reducing carbon dioxide in the atmosphere,  is the planting more trees.

The planting the more new tress is the one of the most effective ways to reduce the atmospheric carbon dioxide. this will also limits the global warming. the plants remove the carbon dioxide from the atmosphere through the photosynthesis. plants helps to stop the climate change as they will remove the carbon dioxide from the atmosphere. and  store the carbon in tress and the soil.

Thus , the way to reduce the carbon dioxide from the atmosphere is the planting more and more trees.

To learn more about  carbon dioxide here

https://brainly.com/question/19923519

#SPJ4

Sodium chloride reacts with silver nitrate.  NaCl + AgNO3 → AgCl + NaNO3

intermolecular forces present in it.

The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.

Most of the physical and chemical features of matter are caused by intermolecular forces.

An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.

Learn more about Intermolecular forces  here:

https://brainly.com/question/9007693

#SPJ4

Mg + 2HCl → H2 + MgCl2 because The reaction between magnesium and hydrochloric acid produces hydrogen gas and magnesium chloride.

Molecules are the smallest unit of a chemical compound that can exist independently and remain unchanged in chemical composition. A molecule is composed of two or more atoms that are chemically bonded together. A molecule can be made up of different elements, such as carbon, hydrogen, oxygen, and nitrogen, and can be composed of a variety of combinations of these elements. Molecules are essential components of all living things, as they are important for basic functions such as energy transfer, metabolism, and cell structure.

To learn more about molecule visit:

brainly.com/question/475709

#SPJ1

Answer:

See the attached images for solution.

At a pressure of 12.4 atm and a temperature of 850 c, 8.2 liters of water can be created from 55 grams of oxygen gas and an excess of hydrogen.

first, we need the no.of moles of O2 = mass/molar mass of O2

                                                            = 55 g / 32 g/mol

                                                            = 1.72 mol

from the balanced equation of the reaction:

2H2 (g) + O2(g) → 2H2O(g)

we can see that the molar ratio between O2: H2O = 1: 2

So we can get the no.of moles of H2O = 2 * moles of O2

                                                                 = 2 * 1.72 mol

                                                                 = 3.44 mol

So by substitution by this value in the ideal gas formula:

PV = nRT

when P = 12.4 atm  & n H2O = 3.44 mol & R= 0.0821 & T = 85 + 273=358K

12.4 atm *V = 3.44 * 0.0821 * 358 = 8.15 L

∴ V ≈ 8.2 L

In the physical sciences, pressure is defined as the perpendicular force per unit area or stress at a point within a confined fluid. The pressure exerted on a floor by a 42-pound box with a bottom area of 84 square inches is equal to the force divided by the area over which it is exerted, or one-half pound per square inch.

Learn more about pressure here:

https://brainly.com/question/15170210

#SPJ4

Answer:

1. Hydrogen ions; acidic

2. Alkali; hydroxide ions; alkaline

3a. Sulfuric acid --> 2 Hydrogen ions + sulfate ion

H₂SO₄ --> 2H+ + SO₄²-

3b. Sodium hydroxide --> Sodium ion + Hydroxide ion

NaOH --> Na+ + OH-

Explanation:

1. Sulfuric acid releases hydrogen ions in solution. This makes the solution acidic.

Acids produce hydrogen ions when dissolved in aqueous solutions.

2. Sodium hydroxide is an alkali. It releases hydroxide ions in solution. This makes the solution alkaline.

Alkalis are soluble bases that produce hydroxide ions in solution.

3a. Sulfuric acid --> 2 Hydrogen ions + sulfate ions

H₂SO₄ --> 2H+ + SO₄²-

The equation above is for the ionization of sulfuric acid

b. Sodium hydroxide --> Sodium ion + Hydroxide ion

NaOH --> Na+ + OH-

The equation above is for the ionization of sodium hydroxide

Answer:

the answer is B. the energy required to go from a solid to liquid

B. The latent heat of fusion is the energy required to go from a solid to a liquid. It is the amount of heat energy that must be added to a substance at its melting point to convert it from a solid to a liquid, without changing its temperature.

Latent heat is the amount of heat energy required to change the phase of a substance without changing its temperature.

Option A describes the energy required to break molecular bonds, which is called the bond dissociation energy.

Option C describes the energy required to go from a solid to a gas, which is called the latent heat of sublimation.

Option D describes the energy required to go from a liquid to a gas, which is called the latent heat of vaporization.

Learn more about latent heat at:

https://brainly.com/question/28044951

#SPJ7

Answer: distance to epicenter: 7600 km, s-wave travel time: 20 minutes

Answer:

not balanced, oxygen, not equal

Explanation:

Alright, so let's go ahead and balance this equation!

The easiest way to do this is to take out a piece of paper and write down your elements on each side. Let's do it together:

--------------------------------------------------------------------------------------------------------------

[tex]2NaOH + H_{2} SO_{4}[/tex]  →  [tex]Na_{2}SO_{4} + H_{2}O[/tex]

Let's count the number of molecules for each element on both sides. Starting with the left side:

↓

[tex]2(NaOH) + H_{2} SO_{4}[/tex]

The coefficient of 2 in front of NaOH will be distributed to Na, O, and H. The subscripts for H and O only apply to themselves, so S will have only one molecule. Then our molecule counts for the reactant side (the left side) will be:

↓

Na:  2

 O:  2+4 = 6

 H:  2+2 = 4

 S:   1

↓

Now, let's move on to the right side:

[tex]Na_{2}SO_{4} + H_{2}O[/tex]

This side only has subscripts, no coefficients, so that means that any elements that don't have subscripts (S and the second O ) will have a count of one. Knowing this, our molecule count for the product side (right side) is:

↓

Na:  2

 O:  4+1 = 5

 H:  2

 S:   1

↓

Let's compare our counts now:

Left side:        Right side:

Na:  2             Na:  2

 O:  6               O:  5

 H:  4               H:  2

 S:   1                S:  1

We can see that our O and H molecule counts are different. So that means it's an unbalanced equation.

--------------------------------------------------------------------------------------------------------------

Therefore, your answer will be:

The equation is not balanced because the number of hydrogen atoms and oxygen atoms is not equal in the reactants and in the products.

Given :

Mass of gold ( Au ) is 212 gram.

To Find :

Atoms of gold present in 212 gram of gold.

Solution :

Molecular mass of gold is 197 gram.

So, number of moles of gold in 212 gram is :

[tex]n = \dfrac{212}{197} \ moles\\\\n = 1.076 \ moles[/tex]

Now, we know 1 mole of any element contains [tex]6.022 \times 10^{23}[/tex] atoms.

So, number of atoms present in 1.076 moles are :

[tex]N = 1.076 \times 6.022\times 10^{23}\\\\N = 6.48 \times 10^{23}[/tex]

Hence, this is the required solution.

By treating 54.0 grams of aluminum with a solution of zinc chloride, ZnCl, 328.6g/mol of zinc metal will be created.

The molar mass of a substance is its mass expressed in grams per mole. As shown in this video, the molar mass of a substance can be calculated by adding the molar masses of the substance's component atoms. The number of moles in the substance can then be calculated from its molar mass and converted to mass.

Balance chemical reaction,

2Al + 3ZnCl₂ → 2AlCl₃ +3Zn

Molar mass of aluminum is 27.99g/mol

Molar mass of zinc chloride is 136.29g/mol

The mole ratio of ZnCl₂ to Al is 3:2

Grams →  moles  → moles → grams

45Al × 1mol Al/27.99g Al × 3 mol ZnCl₂/2 mol Al × 136.29 g ZnCl₂/1 mol ZnCl₂

on simplification,

45×3×136.29/27.99×2 = 328.6g/mol.

To know more about molar mass visit:

https://brainly.com/question/12127540

#SPJ4

The quantity of energy required to convert 0.562 kg ice at -20.0°C to steam at 250°C is equal to 1885.4 KJ.

The specific heat capacity can be described as the amount of energy needed to raise the temperature in one unit of material by one-degree celsius.

The addition or emission of heat from the system will the temperature of the substance will be changed:

Q = mCΔT

Given, the amount of ice, m = 0.562 Kg = 562 g

The change in the temperature = 100 -20 = 80°C

The specific heat capacity of the water, C = 4.18J/g°C

The specific heat capacity of the ice, C = 2.03 J/g°C

The phase transition from ice to steam:

H₁ = 562 × 2.03 × (0-(-20))

H₁ = 22,817 J = 22.8 KJ

The enthalpy of the fusion will be absorbed:

H₂ =  n × H(fus)

The number of moles of water = 562/18 = 31.22 mol

H₂ = 31.22 × 6.02 kJ/mol

H₂ = 187.95 KJ

Phase transition from water at 0°C to water at 100°C:

H₃ = 562 × 4.18 × 100

H₃ = 234 KJ

The phase transition from water at 100°C to steam at 100°C:

H₄ = n × H(vap)

H₄ = 31.22 × 40.7 kJ/mol

H₄  = 1270.65 KJ

The heat to make steam at a temperature of 250°C:

H₅ = m × S×ΔT

H₅ = 562 × 2.02 ×150 = 170 KJ

The total energy needed to convert  0.562 kg ice at -20.0°C to steam at 250.0°C:

H = H₁ + H₂+ H₃+ H₄ +H₅

H = 1885.4 KJ

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

Answer:

1. Vinegar.

2. a solution is a special type of homogeneous mixture composed of two or more substances.

* Hypertonic

* isotonic

* hypotonic

Answer: 1joule

Explanation:

The average molecular velocity of the molecules will decrease as the reaction goes to completion at a constant temperature.

What is Molecular velocity?

Molecular velocity is the average speed of molecules in a sample of matter. It is determined by the temperature of the sample, with higher temperatures resulting in higher molecular velocities.

This is because the reaction produces a single product, meaning that the number of molecules in the reaction vessel is decreasing as the reaction goes to completion. As the number of molecules decreases, the average molecular velocity of the molecules decreases as well.

To know more about molecular velocity,

https://brainly.com/question/17031383

#SPJ4

Answer:

D

Explanation:

1 mole of N2 reacts with 3 moles of H2

28 g of N2 reacts with 6g of H2

x will react with 5.8g of H2

x= (28*5.8)/6

= 27.0g

Answer:

"457.2 mm.Hg" is the right solution.

Explanation:

Given:

Pressure,

[tex]P_1=600 \ mm.Hg[/tex]

[tex]P_2 = ?\\[/tex]

Volume,

[tex]V_1=70.0 \ L[/tex]

[tex]V_2=90.0 \ L[/tex]

Temperature,

[tex]T_1=20^{\circ}[/tex]

or,

   [tex]=293 \ K[/tex]

[tex]T_2=15.0^{\circ}[/tex]

or,

    [tex]=288 \ K[/tex]

As we know,

⇒  [tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

By putting all the given values in the above expression, we get

⇒  [tex]\frac{0.789\times 70}{293} =\frac{P_2\times 90}{288}[/tex]

⇒  [tex]0.188=\frac{P_2\times 90}{288}[/tex]

By applying cross-multiplication, we get

⇒  [tex]P_2=\frac{0.188\times 288}{90}[/tex]

⇒       [tex]=\frac{54.144}{90}[/tex]

⇒       [tex]=0.6016 \ atm[/tex]

or,

⇒       [tex]=457.2 \ mm.Hg[/tex]

Both tests, one using heated copper sulfate pentahydrate with iron filings and sulfur, and the other using copper sulfate pentahydrate, produced gas production and color changes.

Iron sulfide, which is black in color, is created when iron (gray) and sulfur (yellow) mix chemically.

Fe(s) + S(s) -> FeS(s)

The water molecules in the crystal of copper sulfate-pentahydrate (blue) evaporate when heated, transforming it into anhydrous copper sulfate, which is white in color.

CuSO4.5H2O -> CuSO4 + 5H2O

As a result, both reactions have changed in color and chemical organization. It is considered a chemical change to heat crystals of hydrated copper sulphate. An aqueous solution of copper sulphate loses copper ions to iron. It is an isolated displacement reaction between two metals. In the activity series, iron comes after copper.

To learn more about sulfur click here https://brainly.com/question/13469437

#SPJ4

Answer: Both resulted in color change, One involved chemical change while the other involved physical change.

Explanation:

B and E on edge.

Answer:

6.82 Mol CO2

Explanation:

The energy that is released for the breaking of bonds is 229 kJ/mol.

We should be able to recall that the enthalpy of the reaction taken to be the energy that is evolved or absorbed in the reaction that is ongoing. We have to note that in the course of the reaction there would be the breaking and the making of bonds.

Now we know that;

The bond energy can be given as;

Sum energy of the broken bonds of reactants  - Sum of the energy of the formed bonds

Hence;

(945 + 498) - 2(607)

1443 - 1214

= 229 kJ/mol

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1

The amount of sodium-24 decreases to approximately 125 g.

Sodium is a chemical element with the symbol Na on the periodic table. It is a soft, silvery-white, highly reactive metal and is a member of the alkali metal group of chemical elements.

The graph below shows the amount of 500 g sample of sodium-24 over time. The x-axis of the graph represents time (in hours), and the y-axis represents the amount of sodium-24 (in grams). The title of the graph is "Amount of sodium-24 in 500 g Sample Over Time".

The graph shows that the amount of sodium-24 in the sample decreases over time. After 24 hours, the amount of sodium-24 in the sample decreases to approximately 375 g. After 48 hours, the amount of sodium-24 decreases to approximately 250 g. After 72 hours, the amount of sodium-24 decreases to approximately 125 g.

To learn more about sodium
https://brainly.com/question/25597694
#SPJ1

10.0g of CaBr2 contains 0.05 mol according to the equation mole(n) = mass / molar mass (10.0g CaBr2 x 1 mol CaBr2 / 199.88 g CaBr2 = 0.05 mol)

The mole, represented by the symbol mol, is the SI unit of material quantity. One mole is made up of precisely 6.022*1023 elementary components. The Avogadro number, NA, as expressed in mol1, is the fixed numerical expression of the Avogadro number.

The weight in grams of 1 mole of a certain substance is its molar mass. The atomic mass of the chemical unit, expressed in atomic mass units, determines the mass of a substance (amu).

To know more about mole visit :

https://brainly.com/question/28239680

#SPJ4

Explanation:

The issue of Pollution in our the oceans has changed the chemistry of water.

When bonding, atoms try to achieve a stable noble gas configuration.

Atoms are always trying to achieve stability. In the modern periodic table, noble gases present in the group 18 are the most stable. They have a completely filled outermost or the valence shell, that is, it contains 8 valence electrons in its valence shell.

Due to this stable electronic configuration, they are inert in nature, that is, they do not have a tendency to react by sharing or losing their electrons. When participating in a bonding, atoms try to lose or gain electrons to reach their nearest noble gas configuration and attain stability.

To know more about noble gas here

https://brainly.com/question/11414033

#SPJ4