A student is working hard on a chemistry lab experiment that uses a strong acid. Halfway through the lab, the student gets hungry and starts eating a bag of chips. When the student licks their fingers, they start to have a severe reaction. summary

Answers

Answer 1
A student consumed dangerous chemicals

Related Questions

Which statement best describes why an element's atomic number is different from its atomic mass?

A. The atomic number represents the number of electrons, while the atomic mass represents the total mass of the protons and neutrons.

B. The atomic number represents the number of protons, neutrons, and electrons, while the atomic mass represents the total mass of the protons, neutrons, and electrons.

C. The atomic number represents the number of protons, while the atomic mass represents the total mass of the protons, neutrons, and electrons.

D. The atomic number represents the number of protons, while the atomic mass represents the total mass of the protons and electrons.

Answers

Answer: C

Explanation: The atomic number is fixed by the number of protons. An element will have an exact number of protons. The neutrons can vary, and they are the reason elements have isotopes (all the same number of protons, but some have differing numbers of neutrons). Electrons are too small to be counted in the atomic weight figures.

Which of these is a reason why nuclear power is important?
4.4.2 nuclear power

Answers

Answer:

Fossil fuels will run out soon

Consider 81.0 g samples of two different compounds consisting of only carbon and oxygen. Compound 1 consists of 22.1 g of carbon, and compound 2 has 34.7 g of carbon. Determine the ratio in whole numbers of the masses of carbon that combine with 1.00 g of oxygen between the two compounds.

Answers

Answer:

Compound 1:   CO2

Compound 2:  CO

Explanation:

The attachment illustrrates the calculations.  The masses of both C and O are converted into moles of those two elelements and the resulting mole values are taken as ratios of the two elements.  Compound 1 has twice as many moles of O as of C, so it's empirical formula must be CO2.  Compound 2's O/C ratio is 1, so it becomes CO.

The 4f subshell of an atom contains 14 electrons. What is the maximum number
of electrons having same spin in it?

Answers

Answer:

I hope it will help you

Explanation:

Please make me brainlest

THANK U

What is the equation used to calculate the density of a material?

Answers

Answer:

density = (mass) divided by (volume)

or just D = M/V

Which equation represents a decomposition reaction?
O 4P +502 → 2P205
O H2SO4 + 2NaOH → Na2SO4 + 2H2O
O 2C8H18 + 2502 → 16CO2 + 18H2O
O 6NaNO3 → 6NaNO2 + 302

Answers

the fourth reaction describe a decomposition reaction (NaNO3 decomposed to become NaNO2 and O2)

first and third reaction are considered combustion reaction (reacting with oxygen)

second reaction is acid-base reaction

There are various type of chemical reactions in chemistry like combination reaction , displacement reaction. One of these is the decomposition reaction. The correct option is option D.

What is decomposition reaction?

Decomposition reaction is the one in which molecules breaks down in its constituent in presence of energy. Energy can be in any form, it can be light energy , heat energy.

Decomposition of water is done by providing electricity and the reaction is called electrolysis. Lysis means to break. To give decomposition reaction molecule must have more than one element.

The fourth reaction describe a decomposition reaction (NaNO3 decomposed to become NaNO2 and O2). First and third reaction are considered combustion reaction (reacting with oxygen). Second reaction is acid-base reaction.

Therefore, the correct option is option D.

To learn more about decomposition reaction, here:

https://brainly.com/question/13134296

#SPJ2

If a lab fire erupts, immediately
A) notify parent or guardian
B) run for fire extinguisher
C) throw water on fire
D) open window

Answers

Answer:

B

Explanation:

best way to put off the fire

Answer:

b

Explanation:

by the time you tell some one the fire could have spread and throwing water could spread the fire and opening the window adds fuel to the fire so it can burn hotter

So if I was shrunken into a tiny person what would you do to me like would you take care of me would you crush me with your bare feet or something

Answers

Explanation:

It is really bad when you are in some kind of problems and you don't have anybody to help you out. You do not even know where you will meet a person you treated good or bad. We have to treat every human equally,no matter the outcome.

So in my opinion, I would take care of you.

(a) Explain why ammonia has a low boiling point

Answers

Explanation: Ammonia has pretty strong intermolecular forces because it can form hydrogen bonds, however it can't form as many hydrogen bonds per molecule as water and so its boiling point and melting point are lower.

As ammonia has less intermolecular force of attraction, it have usually low boiling point.

What is hydrogen bonding?

Hydrogen bonding is not a covalent bond to a hydrogen atom, but rather a type of dipole-dipole attraction between molecules.

The attractive force between a hydrogen atom covalently bonded to a very electronegative atom such as an N, O, or F atom and another very electronegative atom causes it.

When a hydrogen atom bonded to an electronegative atom approaches another electronegative atom, strong intermolecular forces are created.

Simple molecules include hydrogen, ammonia, methane, and pure water. All of them have strong covalent bonds among both their atoms but much weaker intermolecular forces.

When one of these substances melts or boils, the weak intermolecular forces, not the strong covalent bonds, break.

Thus, ammonia usually have low boiling point.

For more details regarding hydrogen bonding, visit:

https://brainly.com/question/15099999

#SPJ2

What is the signifcence of H, 2H, 3 H, H2, 2 He, Na,
Snaco, ouco, CO, 460?

Answers

H=hydrogen,H2=hydrogen atoms,

Can someone help me?
Which element would have the lowest electronegativity?

an element with a large number of valence electrons and a small atomic radius

an element with a large number of valence electrons and a large atomic radius

an element with a small number of valence electrons and a large atomic radius

an element with a small number of valence electrons and a small atomic radius

Answers

Answer:

an element with a large number of valence electrons and a large atomic radius

Explanation:

Electronegativity means a tedency when an atom attracts bonding electrons in a covalent bond situation.

» If an atom has many valency electrons [ empty orbitals in outermost shell ], it has difficulty in attracting electrons hence electronegativity low.

» If an atom is large, its nuclear attraction force of incoming electrons is low hence low electronegativity.

[tex].[/tex]

The element that would have the lowest electronegativity is an element with a small number of valence electrons and a large atomic radius.

Both electronegativity and atomic radius are periodic trends. Electronegativity increases across the period while atomic radius decreases across a period.

An element that has a small number of valence electrons and a large atomic radius will most likely be a metal hence it will have the lowest electronegativity.

Learn more: https://brainly.com/question/2060520

Which sentence best describes how matter moves through an ecosystem?
A.
Matter only moves from producers to decomposers.
B.
Matter only moves from consumers to producers.
C.
Matter is made by producers and is destroyed when eaten.
D.
Matter is continually cycled through an ecosystem.

Answers

Answer:  D

Explanation:  A healthy ecosystem is capable of exisitng based on the matter within that ecosystem.  Energy is often supplied externally (e.g., the sun,  geothermal, etc.) and is stored by the ecosystem in the form of chemical bonds made between the elements.  Plants utilize matter (minerals, carbon dioxide, water) within the ecosystem (plus whatever is delivered via asteroid or candy wrappers).  Animals depend on the plants for both energy and matter that is transformed into the compunds needed for their existence.  Decomposers act to reduce complex matter (plants and animals) back into more basic compounds that then reenter the ecosystem as raw material for he next set of plants, animals, humans, and aliens.

What is the Color of potassium heptaoxodichromate (v)

Answers

Answer:

orange

Explanation:

The color of potassium hepaoxodichromate is orange.

Answer:

it's very bright red orange in color.

Explanation:

plz Mark me as brainliest plz

:DD

Can someone PLEASE help me with this im struggling bad

Answers

Answer:

4.5+2.34= 6.844.5-5 =-0.56.00+3.411= 9.4113.4×2.32 = 7.8887.77/2.3= 3.37

7. 1200×23.4=28080

9. = 78.512

10. =341.199

11= 7.45

12 =65.0023

13.=3400210.34

Explanation:

please mark me as branliest

hope it is helpful

How many GRAMS of phosphorus are present in 2.75 moles of phosphorus pentachloride ?

Answers

Answer:

molecular weight of Phosphorus Pentachloride or grams The molecular formula for Phosphorus Pentachloride is PCl5. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Phosphorus Pentachloride, or 208.238761 grams.

Explanation:

may this answer is helpful for you

A gas has a volume of 4.25 m3 at a temperature of 95.0°C and a pressure of 1.05 atm. What temperature will the gas have at a pressure of 1.58 atm and a volume of 2.46 m3

Answers

Answer:

[tex]\boxed {\boxed {\sf 82.7 \textdegree C}}[/tex]

Explanation:

We are asked to find the temperature of a gas given a change in pressure and volume. We will use the Combined Gas Law, which combines 3 gas laws: Boyle's, Charles's, and Gay-Lussac's.

[tex]\frac {P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

Initially, the gas has a pressure of 1.05 atmospheres, a volume of 4.25 cubic meters, and a temperature of 95.0 degrees Celsius.

[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{P_2V_2}{T_2}[/tex]

Then, the pressure increases to 1.58 atmospheres and the volume decreases to 2.46 cubic meters.

[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{1.58 \ atm *2.46 \ m^3}{T_2}[/tex]

We are solving for the new temperature, so we must isolate the variable T₂. Cross multiply. Multiply the first numerator by the second denominator, then multiply the first denominator by the second numerator.

[tex](1.05 \ atm * 4.25 \ m^3) * T_2 = (95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)[/tex]

Now the variable is being multiplied by (1.05 atm * 4.25 m³). The inverse operation of multiplication is division, so we divide both sides by this value.

[tex]\frac {(1.05 \ atm * 4.25 \ m^3) * T_2}{(1.05 \ atm * 4.25 \ m^3)} = \frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]

[tex]T_2=\frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]

The units of atmospheres and cubic meters cancel.

[tex]T_2=\frac{(95.0 \textdegree C)*(1.58* 2.46 )}{(1.05 * 4.25 )}[/tex]

Solve inside the parentheses.

[tex]T_2= \frac{(95.0 \textdegree C)*3.8868}{4.4625}[/tex]

[tex]T_2= \frac{369.246}{4.4625} \textdegree C}[/tex]

[tex]T_2 = 82.74420168 \textdegree C[/tex]

The original values of volume, temperature, and pressure all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 4 in the hundredth place to the right tells us to leave the 7 in the tenths place.

[tex]T_2 \approx 82.7 \textdegree C[/tex]

The temperature is approximately 82.7 degrees Celsius.

what are adipoyl chloride used for or uses?

Answers

Answer:

Explanation:

It is a colorless liquid. It reacts with water to give adipic acid. It is prepared by treatment of adipic acid with thionyl chloride.

Adipoyl Chloride can be used in the synthesis of nylon. Also it is used in the synthesis of chiral polymer for membrane application.

what is force ?write its effects. ​

Answers

Answer:A force is a push or pull upon an object resulting from the object's interaction with another object.

A force acting on an object causes the object to change its shape or size, to start moving, to stop moving, to accelerate or decelerate

good morning friends



what is electric configuration?
write the electric configuration of chlorine..​

Answers

Answer:

The systematic representation for the distribution of electrons in different energy levels of an atom or orbital of an atom is called electronic configuration .

The electronic configuration of chlorine is 1s^2,2s^2,2p^6,3s^2,3p^6

mark me as branliest

hope it is helpful

What is the Color of trioxonitrate

Answers

Answer:

And the ans is yellowish

highlighters are like
pepper
salt
sugar
water

Answers

Answer:

wait what? is this a homework question?

We need a question to answer please re post it again

How do the respiratory system and circulatory system interact? (1 point)
o
In the lungs, carbon dioxide is transferred to the blood and carried by red blood cells. Once it is distributed, the red blood cells
pick up oxygen and transport it back to the lungs, where is transferred to the lungs so it can be exhaled.
O
In the lungs, oxygen is transferred to the blood and carried by red blood cells..Once it is distributed, the red blood cells pick up
carbon dioxide and transport it back to the lungs, where is transferred to the lungs so it can be exhaled
The respiratory system and circulatory system do not interact because the respiratory system is related to breathing and the
circulatory system is related to blood.
O
In the lungs, air is transferred into the blood stream, where red blood cells deliver it to the heart. The heart then separates the
oxygen and sends it to the organs, while sending the waste back to the lungs to exhale.

Answers

Explanation:

The circulatory and respiratory systems work together to circulate blood and oxygen throughout the body. Air moves in and out of the lungs through the trachea, bronchi, and bronchioles. Blood moves in and out of the lungs through the pulmonary arteries and veins that connect to the heart

What are two factors that can change the rate of a chemical?

Answers

Answer:

the surface area of a solid reactant.

temperature.  

presence/absence of a catalyst.

Use you observation to determine which polymorph is in the customer’s returned chocolate sample.

Answers

Cocoa butter, the fat in chocolate, can crystallize in any one of 6 different forms (polymorphs, as they are called). Unfortunately, only one of these, the beta crystal (or Form V), hardens into the firm, shiny chocolate that cooks want. Form VI is also a stable hard crystal, but only small amounts of it form from the good beta (Form V) crystals upon lengthy standing. When you buy commercial chocolate it is in the form of beta crystals.

When you melt chocolate and get it above 94° F, you melt these much desired beta crystals and other types of crystals can set up. If you simply let melted chocolate cool, it will set up in a dull, soft, splotchy, disgusting-looking form. Even the taste is different. Fine chocolate has a snap when you break it and a totally different mouthfeel from the other cocoa butter forms.

hope it's help you......!!!!!!!

please mark as brain list.......!!!!!!!

#rishu

how many times larger is 45000 than 0.0045?​

Answers

Answer:

10,000,000

Explanation:

45000÷0.0044

=10,000,000

Answer:

10,000,000 times larger.

Explanation:

Multiply 0.0045 by 10,000,000 to get 45000. Or, Divide 45000 by 0.0045 to get 10,000,000.

electrolysis of aqueous copper(2) sulfate half ionic equation

Answers

Answer:

Copper is less reactive than hydrogen, so copper (Cu) is produced at the negative electrode. The half equation is: Cu2+ + 2e- → Cu

The hydroxide ion is more reactive than the sulphate ion, therefore this forms water (H2O) and oxygen at the positive electrode.

Which of these answers describes a scientific law?
(Pls)

Answers

Answer:

big ablsolty long pp

Explanation:

dong

Which of the following statements correctly explains why the excretory system is different from the digestive system? (1 point)
The excretory system is different from the digestive system because it removes waste from the body by filtering water, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering urine, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism, filtering food
The excretory system is different from the digestive system because it removes waste from the body by filtering blood, which
includes mostly the by-products of metabolism,

Answers

The body is composed of several systems. Each system involves various organs and associated structures.

The correct answer is "The excretory system is different from the digestive system because it removes waste from the body by filtering food, which

includes mostly the by-products of metabolism."

The digestive system is mostly concerned with the breakdown of food and its subsequent absorption in the body. Several organs are responsible for this from the mouth to the small intestine.

The excretory system filters removes wastes from the body by filtering food substances which  includes mostly the by-products of metabolism.

Learn more: https://brainly.com/question/13258877

Which of the following is a scientific question you could ask about shoes?
A. Are modern sandals similar to sandals from the 1960s?
B. What shoes will be popular next summer?
C. What is my favorite shoe color?
D. Are there any running shoes that help people run faster?

Answers

Answer:

D. Are there any running shoes that help people run faster?

Explanation:

because it's the question that more seems scientific.

i hope this helps

Give reason
1) The efficiency of a practical machine is less that 100%.
1) The efficiency of a machine can be increased by using lubricants in the movable parts. ​

Answers

Explanation:

The efficiency of a practicle machine is less than 100% because some of the applied force is wasted due to oovercoming friction.The efficiency of a machine can be increased by using lubricants in the movable parts because lubricants helps to reduce friction.

I hope it helped U

stay safe stay happy

Other Questions
nick wrote some books change it into passive voice can anyone pls help mefill it pls Can the distributive property be used to rewrite8 x (10 + 9)? 1.Why do Christians believe that morality is absolute and objective, rather than relative and subjective? What do you mean by sustainable development? the Lion killed a goat change into passive voice draw a diagram to show what happened to the particle, when a liquid cools to a solid? 400=x what is x? Thanks i need help asap!!!!!!!!!!!! What process makes children different than their parents? In a competitive examination negative marks of 2 are awarded for each wrong answers and 4 marks for every correct answer. If neerav gets 15 correct answers and 5 wrong answers and rajan gets 14 correct answers and no wrong answers, who gets more marks and by how much? help smart peeeps help PLEASE help!10 points 3. Jerry's sneakers were (new) .............. than mine. 24 - 8X = -16Help pls There are 2.54 centimeters in 1 inch. There are 100 centimeters in 1 meter.To the nearest meter, how many meters are in 197 inches? Enter the answer in the box.meters Is KV=21, what does OZ=Please help All of the following are true of Corts's invasion of Mexico, EXCEPT that:a. smallpox proved to be a very powerful weapon against the natives.b. Tenochtitln held out for three months against a Spanish siege.c. Corts explained that the Spanish had a disease that only gold could cure.d. regional Indian tribes attempted to help the Mexica against the Spanish.e. more than 100,000 warriors were killed. whats number 26............................... Mr.ford drove 224 miles in 4 hours. At what rate of speed did he drive?