A swimming pool reading reports that chlorine is present at 130 ppm. How many grams of chlorine are present per liter of pool water?

Answers

Answer 1

130 ppm will contain  0.12985167 grams of chlorine present in per liter of pool water.

What is ppm?

This is an abbreviation for "parts per million" and it also can be expressed as milligrams per liter (mg/L).

1001.142303 ppm is equal to 1 g/L

So, 130 ppm will contain  [tex]\frac{130}{1001.142303}[/tex] grams of chlorine present in per liter of pool water which is equal to 0.12985167 gram/L.

Learn more about ppm here:

https://brainly.com/question/2618749

#SPJ1


Related Questions

4. A 14.5-L balloon is in the air where it is 20.0 C at 0.980-atm. A wind passes over and the balloon's pressure becomes 740.0-mmHg and its size adjusts to 14.3-L. What Celsius temperature was the wind? ​

Answers

The temperature of the wind as that decreases the volume and the pressure of the balloon to the given values is 14.09°C.

What is Combined gas law?

Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

P₁V₁/T₁ = P₂V₂/T₂

Given the data in the question;

Initial volume V₁ = 14.5LInitial pressure P₁ = 0.980atmInitial temperature T₁ = 20.0°C = 293.15KFinal volume V₂ = 14.3LFinal pressure P₂ = 740.mmHg = 0.973684atmFinal temperature T₂ = ?

We substitute our given values into the expression above.

P₁V₁/T₁ = P₂V₂/T₂

( 0.980atm × 14.5L )/293.15K = ( 0.973684atm × 14.3L )/T₂

14.21Latm / 293.15K = 13.92368Latm / T₂

14.21Latm × T₂ = 13.92368Latm × 293.15K

14.21Latm × T₂ = 4081.72679LatmK

T₂ = 4081.72679LatmK / 14.21Latm

T₂ = 287.24K

T₂ = 14.09°C

Therefore, the temperature of the wind as that decreases the volume and the pressure of the balloon to the given values is 14.09°C.

Learn more about the combined gas law here: brainly.com/question/25944795

#SPJ1

Giving BRAINLIEST, please HELP!

Answers

Answer:

Its the last one freezing and condensation.

Explanation:

because the line is moving up so it has to be freezing and if it was going down it would have been melting

Why can you calculate the total pressure of a mixture of gases by adding together the partial pres-
sures of the component gases?

Answers

Answer:

Dalton's law of partial pressure

Explanation:

In Dalton's law of partial pressure is states that the total pressure of a gas mixture is equal to the sum of the partial pressures of the component gasses.

This is the equation: [tex]P_{total} =P_{gas 1} +P_{gas2} + P_{gas3}[/tex].. so on and so forth.

basically what Dalton is saying partial pressures are just fractions of the total pressure, think of it as if you cut 12 slices of pizza and 12 people grabbed a slice of the pizza. Each person has 1/12 of that pizza, 1/12 x 12 = 1.  

let's say there is a container filled with nitrogen gas (N) , hydrogen gas (H), and ammonia gas (NH₃).

N= 40 atm

H=20 atm

NH₃= 10 atm

you would plug this information into this equation: [tex]P_{total} =P_{gas 1} +P_{gas2} + P_{gas3}[/tex]

[tex]P_{N} + P_{H} + P_{NH{3}} = P_{total}[/tex]

 [tex]P_{40} + P_{20} + P_{10} = 70[/tex]  

N is 40/70 of the gaseous mixture.

H is 20/70 of the gaseous mixture.

NH₃ is 10/70 of the gaseous mixture.

if you add these fractions up:

[tex]\frac{40}{70} +\frac{20}{70} +\frac{10}{70} =\frac{1}{1} =1[/tex]

I really hope this helps a little!

Giving BRAINLIEST, please HELP!

Answers

Answer:

-65 kJ

Explanation:

To use Hess's Law, you need to combine the equations in a way that results in the desired equation. To add reactants/products, just add the equations and their subsequent heat of reactions. Subtracting reactants/products involves flipping the signs of enthalpies, duplicating reactants/products involves multiplying the coefficients and enthalpies by a desired number.

    A + 2B -->   C + D

+            B --> 2C + D
------------------------------------

    A + 3B --> 3C + 3D

In this case, you only need to add the equations together to get the desired equation. Because you just add the equations, combine each equations' heat of reaction.

(-20 kJ) + (-45 kJ) = -65 kJ

The overall heat of reaction of the desired reaction is -65 kJ.

If 40.0 grams of HCI were dissolved in enough water to make a solution with a total volume of 3.0 liters, what would be the molarity of the solution?

Answers

Answer: 0.37 M

Explanation:

HCl has a gram-formula mass of 36.46 g/mol, so 40.0 g is about 40.0/36.46=1.10 mol.

This means that since molarity = (moles of solute)/(liters of solution), the answer is 1.10/3.0 = 0.37 M

i need help! what is the volume of a 2.0 m solution of an acid needed to neutralize a 3.0 m solution of a 250 ml base?

Answers

Using the titration formula, we know that:

(2.0 M)(volume of acid)=(3.0 M)(250 mL)

volume of acid = (3.0)(250)/(2.0) = 375 mL

When referring to immunity, what does the term innate imply?


the mechanism will provide defense against many different types of pathogens

the mechanism will develop based upon exposure to specific pathogens

the mechanism will be built-in and present at birth

the mechanism will be acquired over an individual's lifetime

Answers

Answer:

The answer should be A. the mechanism will provide defense against many different types of pathogens :)

Have an amazing day!!

Please rate and mark brainliest!!

Question 19 of 25
Which of the following characteristics would make a gas non-ideal?
A. The gas molecules move in a random pattern.
B. The gas molecules possess kinetic energy.
C. The gas molecules interact with one another.
D. The gas molecules exert pressure on a container.
SUBMIT

Answers

Answer: the gas molecules interact with one another

Explanation:

According to the forces of attraction, the  gas molecules interacting  with one another makes a gas non - ideal.

What are forces of attraction?

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.

Learn more about forces of attraction,here:

https://brainly.com/question/23841038

#SPJ2

I’m confused when it comes to chem

Answers

Answer:

The chemistry is the brach of science dealing with properties of matter and the changes which the matter undergo

Explanation:

PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE

What is the molarity of the solution with a volume of 28.8 liters and 27.7 moles?

Answers

Answer: 0.962 M

Explanation:

molarity = (moles of solute)/(liters of solution) = 27.7/28.8 = 0.962 M

What is primarily destroying the ozone layer of the atmosphere?.

Answers

Answer:

CFCs

Explanation:

When CFCs come into contact with sunlight, they divide into molecules. One of those molecules is chlorine, which destroys the ozone.

i need help for this pleeeeeeeeeezzzzzzzzzz

Answers

Answer:

A

Explanation:

did this before

How many grams of He are necessary to fill a balloon having a volume of 4.50 × 10^{3} mL to a pressure of 1.14 × 10^{3} torr at 25.0ºC?

Answers

The mass in grams of He are necessary to fill a balloon having a volume of 4.50×10³ mL to a pressure of 1.14×10³ torr at 25.0ºC is 1.104 grams.

How do we calculate the grams from moles?

Mass (W) in grams from moles (n) will be calculated by using the below equation:
n = W/M, where

M = molar mass

Moles of helium gas will be calculated by using the ideal gas equation:

PV = nRT, where

R = universal gas constant = 62.363 L.torr / K.mol

P = pressure of gas = 1.14×10³ torr

V = volume of gas = 4.50×10³ mL = 4.50 L

n = moles of gas = ?

T = temperature = 25.0ºC = 298 K

On putting these values on the ideal gas equation, we get

n = (1140)(4.5) / (62.363)(298) = 5130 / 18584

n = 0.276 moles

Now we convert this moles into mass by using the first equation as:

W = (0.276mol)(4g/mol) = 1.104 g

Hence required mass of helium gas is 1.104 grams.

To know more about ideal gas equation, visit the below link:

https://brainly.com/question/12873752

#SPJ1

A gas collected from a reaction has a mass of 1.211 g and occupies a volume of 0.677 L. The temperature in the laboratory is 296 K, and the air pressure is 0.987 atm. Calculate the molar mass of the gas.

23.7 g/mol
44.0 g/mol
58.5 g/mol
82.3 g/mol

Answers

Answer: 44.0 g/mol

Explanation:

[tex]M=m.RT/PV[/tex]

M=1.211*0.082*296/ 0.987*0.677

M= 44 g/mol

A gas collected from a reaction has a mass of 1.211 g and occupies a volume of 0.677 L. The temperature in the laboratory is 296 K, and the air pressure is 0.987 atm  the molar mass of the gas 23.7 g/mol. option A is correct.

What is gas law?

The universal gas law given by Boyle, Charles , Avogadro and Gauss known as combined gas law with respect to temperature, volume and pressure using universal gas constant and number of moles.

According to universal gas equation or combined gas equation

          P V = n R T

where , P = pressure

             V = volume

              n = number of moles

              R = universal gas constant = 8.313

               T = temperature

n = W / M.M

W = weight

M.M = molar mass

substituting the value in the equation

0.987 × 0.677 = 1.211 / M.M × 8.313 × 296

M.M = 23.7 g/mol

Therefore, gas collected from a reaction has a mass of 1.211 g and occupies a volume of 0.677 L. The temperature in the laboratory is 296 K, and the air pressure is 0.987 atm  the molar mass of the gas 23.7 g/mol. option A is correct.

Learn more about gas law, here:

https://brainly.com/question/1541059

#SPJ5

In what order should the options appear so as to correctly reflect the order of clomiphene's mechanism of action

Answers

The order which reflect clomiphene's mechanism of action include the following:

Secretion of increased amount of follicle stimulating hormone (FSH) and LH (luteinizing hormone).Growth of the ovarian follicle.Ovulation.

What is Ovulation?

This is the process in which a mature egg is released from the ovary and clomiphene is a medication which induces it.

This is done by the steps mentioned above so as to ensure mature egg is released for fertilization.

Read more about Ovulation here https://brainly.com/question/17044166

#SPJ1

In designing the experiment, the researchers used which type of 32p labeled atp?.

Answers

In designing the experiment, the researchers used Y32P-ATP.

What is ATP?

Adenosine triphosphate (ATP) is an organic substance and a hydro-trope that provides energy for a variety of functions in

living cellsincluding muscular contractionnerve impulse propagationcondensate dissolvingand chemical synthesis

Researchers used Y32P-ATP Because the Y-phosphate of ATP is used for phosphoryl transfer by kinases. As a result, Y32P-ATP is required for the experiment.

Hence the used ATP is Y32P-ATP.

To know more about ATP, visit the below link:

https://brainly.com/question/893601

#SPJ1

Briefly explain the source, harmful effects and physical properties of oxides of
nitrogen.

Answers

Answer:

Nitrogen reacts with oxygen to form a number of nitrogen oxides. It exhibits different oxidation states in its oxides, ranging from +1 to +5. Oxides of nitrogen having nitrogen in the higher oxidation state are more acidic than that in lower oxidation state. Nitrogen oxides are critical components of photochemical smog. They produce the yellowish-brown colour of the smog. In poorly ventilated situations, indoor domestic appliances such as gas stoves and gas or wood heaters can be significant sources of nitrogen oxides.

Following are the harmful effects caused by the oxides of nitrogen

Nitrogen oxides causes irritation in mucous membrane.

Large concentrations of Nitrogen oxide causes lungs problems in humans

It causes injuries to vegetation by damaging leaves.

Nitrogen oxide oxidizes Hydrocarbons in the presence of sunlight, which causes eye irritation, asthama attacks, nasal and throat infections.

NO: sharp, sweet-smelling, colourless gas. Melting point: -163.6°C. Boiling point: -151.8°C. Relative Density: 1.04 (air = 1) NO2: reddish-brown gas with irritating odour

Can someone please help me? :(

Answers

Answer:

D. Extremely high pressure

B. Unusally high oxygen Levels

Sorry about that

becasue there is not ice on the bottum of the ocean it is really hot and unever terran it becasue of big rock forming together they all ready figurd that out

Hope This Helps

Answer:

D and B

Explanation:

PLEASE ANSWER! 5 STAR RATING - THANKS (PROFILE TOO) - BRAINLIEST IF 2 ANSWERS
A 14 V battery powers the headlights of a car. What is the resistance of the
headlights if they draw 3.0 A of current when turned on?

Answers

Answer: 9514 1404 393

 4 2/3 ohms

The resistance is the ratio of voltage to current.

 R = V/I

 R = (14)/(3) = 4 2/3 . . . ohms

Explanation:hi ^^ have a great day hope this helps xlXCherryColaXlx (nice pfp btw)

Please help witht 4 and 5

Answers

Answer:

#4: 0.89 mol/L #5: 0.36 mol

Explanation:

#4: Morality is Moles/ Liters

So take 3.2 mols ÷ 3.6 L = 0.8888... since there are 2 sig figs in the question the answer would round to 0.89 mol/L

#5: to find the number of moles needed, you take the mol/L and multiply that by the volume.

0.89 mol/L ×0.400L = 0.356 mols. the liters cancel out. Since 0.89 has the least number of sig figs your final answer should have 2. which it 0.36 mols.

I hope this helps, good luck!

A lion catches and eats a deer. What is this relationship ?

Answers

Answer:

this is a food chain in ecosystem

Answer:

this is a food chain in ecosystem

Explanation:

hope this helps


What is the empirical formula of a compound that is 70.62% Hg, 12.48%
Cl, and 16.9% O?

Answers

Answer:

Empirical Formula ClHgO3 Mercurous Chlorate

Explanation:

Cl=12.48% Hg=70.62% O=16.9%

SCIENCE HELP MY COUSIN NEEDS HELP ILL GIVE BRAINLIEST FOR CORRECT ANSWER

Answers

Answer:

C

Explanation:

Releases Ink!

Answer: I'm pretty sure the squid releases a spray of ink

Explanation: I've seen it in movies

If we accelerate a radioactive isotope of an element in a particle accelerator to a speed close to that of light, what would its observed mass be compared to its mass at rest

Answers

When the speed of the particle is close to that of light, it's observed mass would be infinitely large.

To answer the question, we need to know what observed mass is.

What is observed mass in relativity?

This is the mass the body of an object in relativistic motion appears to have.

So, observed mass, m' = m/√(1 - β²) where

m = rest mass and β = relative velocity of isotope to light.

Now, since the speed of the particle is close to that of light, β ≅ 1.

So, m' = m/√(1 - β²)

m' = m/√(1 - 1²)

m' = m/√(1 - 1)

m' = m/√0

m' = m/0

m' = ∞

So, when the speed of the particle is close to that of light, it's observed mass would be infinitely large.

Learn more about observed mass here:

https://brainly.com/question/14553472

Write the balanced chemical equation for the extraction of iron in the thermite reaction.

2AI + Fe₂O3 = 2Fe + Al2 O3

From the above reaction, state the:

a) Electropositive metal -
b) Less electropositive metal -
c) Reducing agent -​

Answers

In the given chemical reaction iron is less electropositive metal and aluminum is more electropositive and behave as a reducing agent also.

What is electropositivity?

Electropositivity is the ability of an atom of donation or losing of electrons easily.

From the given chemical reaction it is clear that oxidation state of iron changes from +3 to 0 & of aluminum is from 0 to +3. So in the above chemical reaction aluminum is more electropositive than iron metal. And aluminum is behave as a reducing agent as it helps in the reduction process by providing electrons.

Hence aluminum is electropositive metal and reducing agent, iron is less electropositive.

To know more about electropositivity, visit the below link:
https://brainly.com/question/21819287

#SPJ1

What does radioactive mean

Answers

Answer:

emitting or relating to the emission of ionizing radiation or particles

Explanation:

Radiation can damage the DNA in our cells.

In other words!

the giving off of rays of energy or particles by the breaking apart of atoms of certain elements (as uranium)

Name one strength and weakness about your volcano expeirment.

Answers

Answer:

weakness, There are two conditions that lead to a weak volcanic eruption, low viscosity magma and little presence of trapped gases.

strength, The VEI or (Volcanic Explosivity Index)  is a scale that describes the size of explosive volcanic eruptions based on magnitude and intensity. The numerical scale (from 0 to 8) is a logarithmic scale, and is generally analogous to the Richter and other magnitude scales for the size of earthquakes.

Explanation:

i really hope this helps. :)

The first time dicaprio heard about global warming, who told him that it was the most important issue of our time.

Answers

The answer for dis is : Al Gore

Giving brainliest, please HELP!

Answers

Answer:

absorb

Explanation:

Endothermic reactions absorb energy ....usually feel cold

Why do bases dissociate in water?
They are polar
They are non polar
They are ionic bonded
They are covalent bonded

Answers

Answer:

because they are ionic bonded

Other Questions
Can someone please help me find the word? Been trying for an hour.. What type of rocks will likely weather the least? 4. A rational number is any number that can be expressed as the quotientor fraction of two integers, p and qa. Trueb. False mildred has a bag of coins. the bag contains 10 dimes, 5 nickels, and 1 penny. she will randomly select 2 coins from the bag one at a time without replacement.what is the probability that mildred will select a dime first and then a penny. Controlled burning is the intentional introduction of light fires into forest regions. What is the main benefit of controlled burning for human populations? How would you want to be remembered?We are in the future, 15 years from now. Think about the way you would want people toremember you.What family member might speak about you?What would you HOPE that person would say about you?Who is a close friend who might speak about you?What would you HOPE that person would say about you?Who is a colleague (someone you work with in your job or organization) who mightspeak about you?What would you HOPE that person said about you?NOW, stop and think...If you continue to live your life the way you are now, would those words you HOPEDyour friends, family, and co-workers would say actually be true?What are some differences between how you might REALLY be remembered andhow youd LIKE TO BE remembered?What are some steps you can take to make the gap between your answers smaller?How does this apply to being a leader? Which was not an outcome of the war in vietnam? question 13 options: strengthened reputation of the united states reunification of north vietnam and south vietnam a communist dictatorship mass killings in cambodia Which advancements were made in mathematics and algebra during the Renaissance? Choose four correct answers. the invention and use of zero the decimal point and the fraction bar positive and negative numbers symbols to represent repeated numbers the use of a letter for an unknown number symbols for equals, multiplication, and division 16) A car's position in relation to time is plotted on the graph. What can be said about the car during segment B?A) The car travels for 80 seconds during segment B.B) The car has come to a stopand has zero velocity.C) The car is traveling faster during segment B than in segment C.D) The car is traveling with a constantvelocity due to the flat lineof the graph.0) How many license plates can be made using three uppercase English letters followed by four digits In the documentary film Southern Comfort, Robert Eades makes his last appearance at a prominent transgender gathering in what city? In adaptive leadership, leaders and followers mutually affect each other, making leadership a complex interactive process. This is ______ The demographic transition theory helps explain a. why people move. c. how migration is related to pull factors. b. how to gather the demographic statistics of a society. d. how population change is related to the technological development of a society. please select the best answer from the choices provided a b c d Kip is using a recipe that calls for 1/4 cup of lemon juice. He has a 6-fluid- ounce bottle of lemon juice. There are 8 fluid ounces of lemon juice in 1 cup. How many batches of the recipe can Kip make? describe the historical circumstances of the revolutionary war Name 1 NBA player for me and describe them in 5-7 sentences. 8) Find the % of change.Original price: $185New price: $160(Explanation too) Without telescopes or other aid, we can look up and see the moon in the night sky because it. Which choice has the least thermal energy Find the geometric mean between 20 and 30. If necessary, round to the nearest tenthA) 17.3B) 7.1C) 24.5D) 25