A tank for storing liquid has a base of area 1. 5msquare what is the pressure on the base of the tank when it contain oil weighing 6000N

A Helmholtz resonator is essentially an acoustic device that consists of a cavity (usually a cylinder or sphere) with a small neck or opening.

The cavity is typically filled with air, and when sound waves enter the resonator, they cause the air inside the cavity to vibrate at specific resonant frequencies. These frequencies are determined by the size and shape of the cavity, as well as the size and shape of the neck or opening.

One of the key features of a Helmholtz resonator is its ability to suppress most frequencies while strongly amplifying a few specific resonant frequencies.

This is because the resonator acts as a filter, allowing only certain frequencies to pass through the neck or opening and enter the cavity. Any other frequencies are reflected or absorbed by the resonator, resulting in a reduction in overall sound levels.

Helmholtz resonators are commonly used in a variety of applications, such as in acoustic engineering to reduce noise levels in buildings or vehicles, in musical instruments to enhance specific frequencies, and in scientific experiments to study the properties of sound waves.

To learn more about cavity, refer below:

https://brainly.com/question/20515008

#SPJ11

The observation that individuals from separate species cannot mate to produce offspring is a guideline for identifying distinct species. This criterion is known as the biological species concept.

The biological species concept defines a species as a group of interbreeding organisms that are reproductively isolated from other groups. In other words, individuals within a species can mate and produce viable, fertile offspring, while individuals from different species cannot.

The biological species concept has some limitations. For example, it cannot be applied to asexual organisms or fossils. Additionally, some species can interbreed and produce hybrid offspring, such as the mule, which is a hybrid of a horse and a donkey.

However, these hybrids are often sterile and cannot produce viable offspring of their own, which reinforces the concept that individuals from separate species cannot mate to produce offspring.

Overall, the biological species concept is a useful guideline for identifying distinct species and understanding their evolutionary relationships. It emphasizes the importance of reproductive isolation and genetic divergence in defining separate groups of organisms.

To know more about species refer here:

https://brainly.com/question/29912614#

#SPJ11

The height of the first floor is 7.5 meters if the water pressure on the ground is 50000 pa and 20,000 pa at the first floor.

Using the hydrostatic pressure equation, we can get the reference level as the water pressure at the ground floor:

P = ρgh

P is equal to 50000 Pa on the ground floor and 20000 Pa on the first. Water's constant density allows us to write:

P1/P2 = h1/h2

where P1 and h1 represent the ground floor pressure and height and P2 and h2 represent the first floor pressure and height.

Inputting the values provided yields:

50000/20000 = h1/h2

As a result, the first level is 2.5 times as tall as the bottom floor. The height of the first floor would be as follows if we used a typical height of 3 meters per storey:

2.5 × 3 = 7.5 meters for h2.

To learn more about pressure of water visit:

brainly.com/question/12473337

#SPJ9

What lightning has in common with the shock you receive when you touch a doorknob is that both phenomena involve the transfer of electric charges between two objects or areas with different electrical potentials. This process is known as electrostatic discharge (ESD).

1. Formation of electric charge: In both cases, there is a buildup of electric charges due to friction or other processes. With lightning, this occurs within clouds, where ice particles collide and generate static electricity. In the case of the doorknob shock, static electricity builds up on your body as you walk across a carpet, for example.

2. Difference in electric potential: Once there is a significant charge buildup, there is a difference in electric potential between the charged object and another object or area with an opposite charge.

For lightning, this difference occurs between the cloud and the ground, while for the doorknob shock, it occurs between your body and the metal doorknob.

3. Discharge: When the electric potential difference is large enough, a sudden and rapid discharge of the built-up charges takes place. This results in the visible lightning bolt or the spark and shock experienced when touching the doorknob.

4. Release of energy: In both cases, the discharge of electric charges releases energy in the form of light, heat, and sound. This energy release is what causes the bright flash of lightning and the audible snap of a doorknob shock.

In summary, lightning and the shock you receive when touching a doorknob are similar because they both involve the buildup and discharge of electric charges between objects or areas with different electrical potentials, ultimately releasing energy in the process.

To know more about electrostatic discharge (ESD) refer here

https://brainly.com/question/31457404#

#SPJ11

The resistance of the heating element is 9 Ohms

Ohm's law states that the current (I) flowing through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) between them. Mathematically, this can be expressed as:

V = IR

In this scenario, we are given the power (P) and current (I) of a heater, and we are asked to find its resistance (R). Power can be calculated using:

P = IV

where V is the voltage across the heater. Since we are not given the voltage, we can rearrange Ohm's law to solve for the resistance:

R = V/I

Substituting the formula for power into this equation, we get:

R = (V/I) = (P/I²)

Substituting the given values of power and current, we get:

R = (325 W) / (6.0 A)² = 9.0 Ohms

The correct answer is (D).

To know more about Ohm's law, click here

https://brainly.com/question/1247379

#SPJ1

The wavelength of the sound wave is approximately 1.5 meters.

1 pt: Knowns/Unknown:
- Frequency (f) = 230 beats per second (Hz)
- Speed of sound (v) = 340 m/s
- Wavelength (λ) = Unknown

1 pt: Write the equation:
The equation relating the speed of sound, frequency, and wavelength is: v = f * λ

1 pt: Solve:
To find the wavelength (λ), rearrange the equation: λ = v / f

1 pt: Correct answer (rounded to one decimal place):
λ = 340 m/s / 230 Hz ≈ 1.5 m

The wavelength of the sound wave is approximately 1.5 meters.

To learn more about sound, refer below:

https://brainly.com/question/29707602

#SPJ11

The type of radioactive decay of carbon to nitrogen is beta-minus decay.

A kind of radioactive decay called beta-minus involves the emission of electrons and antineutrinos from the nucleus as well as the transformation of neutrons into protons, which raises the atomic number of the atom..

This increases the atomic number of the nucleus by one and leaves the mass number unchanged. The question mentions the decay of carbon-14 (C) to nitrogen-14 (N) as an example of beta-minus decay in the given reaction.

To know more about beta-minus decay, visit,

https://brainly.com/question/12534359

SPJ1

Complete question - What type of radioactive decay is this process? An example of?

¹⁴C → ¹⁴N + e⁻ + v

The frequency of the first harmonic played by the instrument is approximately 990.7 Hz.

The frequency of the first harmonic played by the instrument can be calculated using the formula:

f = v / (2L)

where f is the frequency, v is the speed of sound in the test tube, and L is the length of the air column in the test tube.

The speed of sound in test tube is, 340 m/s.

In this case, L = 17.2 cm = 0.172 m. Substituting the given values into the formula, we get:

f = 340 m/s / (2 * 0.172 m)

f = 990.7 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

In order to determine how many coulombs are in a typical car battery's 70 amp-hours of charge, we first need to understand the relationship between amps and coulombs.

Amps measure the flow of electric current, while coulombs measure the amount of electric charge. One coulomb is equal to the amount of charge transported by a current of one ampere in one second.

Therefore, to convert amp-hours to coulombs, we need to multiply the number of amp-hours by the number of seconds in an hour (3,600) and by the number of coulombs per ampere-second (1). This gives us:

70 amp-hours x 3,600 seconds/hour x 1 coulomb/ampere-second = 252,000 coulombs

So a typical car battery provides 252,000 coulombs of charge. This is important information because it helps us understand the amount of electrical energy available for use in the various components of the vehicle, such as the headlights, windshield wipers, and sound system.

The alternator plays a critical role in maintaining and replenishing the charge on the car's battery, which in turn ensures that these components can continue to operate effectively.

Overall, the interplay between mechanical and electrical systems in a motor vehicle is a fascinating and complex topic that requires a deep understanding of physics, engineering, and technology.

To know more about coulombs refer here

https://brainly.com/question/12498766#

#SPJ11

Explanation:

I don't completely know the answer to this question but you can check out numerade that app should help you with your question

The repeated association of the drug injection with the small examination room has led to classical conditioning, resulting in an increased heart rate response to just being in the room.

This phenomenon can be explained through classical conditioning. Classical conditioning is a type of learning in which an organism learns to associate two stimuli together, resulting in a change in behavior.

In this case, the drug injection is the unconditioned stimulus (UCS) that naturally elicits an unconditioned response (UCR) of an increased heart rate.

However, over time, the small examination room has become a conditioned stimulus (CS) that has been associated with the drug injection and now elicits a conditioned response (CR) of an increased heart rate. This means that just the sight or thought of the examination room triggers the same physiological response as the drug itself.

This type of classical conditioning can have both positive and negative effects. On one hand, it can be beneficial for patients who are receiving treatment, as it can help them to anticipate and prepare for the effects of the drug.

On the other hand, it can also lead to a heightened anxiety or fear response in patients who may associate the examination room with negative experiences.

In summary, the repeated association of the drug injection with the small examination room has led to classical conditioning, resulting in an increased heart rate response to just being in the room.

To know more about classical conditioning refer here:

https://brainly.com/question/29651184#

#SPJ11

The effective external resistance of the circuit is 3.5 ohms, the current in the circuit is 1.71 A, the lost voltage in the battery is 1.285 V, and the current in one of the 3-ohm resistors is 1.71 A.

To solve this problem, we can use Kirchhoff's circuit laws and Ohm's law.

First, let's calculate the equivalent resistance of the parallel combination of two 3-ohm resistors:

1/Rp = 1/3 + 1/3

Rp = 1.5 ohm

Now, let's calculate the total external resistance of the circuit:

R = 2 + Rp

R = 2 + 1.5

R = 3.5 ohm

Using Ohm's law, we can calculate the current in the circuit:

V = IR

I = V/R

I = 6/3.5

I = 1.71 A

The lost voltage in the battery is given by:

VL = E - Ir

VL = 23 - 1.711.5

VL = 1.285 V

The current in one of the 3-ohm resistors is the same as the current in the circuit:

I = 1.71 A

Learn more about resistors and resistance at: https://brainly.com/question/29635283

#SPJ1

Complete question:

A battery Of 3 cells is arranged in series each of emf 2V and internal resistance of 0.5-ohm and connected to a 2-ohm resistor.

In a series with a parallel combination of two 3-ohm resistors,

The new speed of the system when the ball is caught is approximately 0.025 m/s

To solve this problem, we will use the conservation of momentum equation:

MaVa + MbVb = (Ma + Mb)(Va+b)

where Ma is the mass of the football (0.257 kg), Va is the velocity of the football (9.76 m/s), Mb is the mass of the receiver and hovercraft (98.6 kg), and Vb is the initial velocity of the receiver and hovercraft (0 m/s, since it is stationary).

0.257 kg * 9.76 m/s + 98.6 kg * 0 m/s = (0.257 kg + 98.6 kg) * (Va+b)

2.50632 kg*m/s = 98.857 kg * (Va+b)

Now, we will solve for Va+b:

Va+b = 2.50632 kg*m/s / 98.857 kg

Va+b ≈ 0.025 m/s

So, the new speed of the system when the ball is caught is approximately 0.025 m/s, rounded to three decimal places.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

The gravitational force between the two masses is approximately 1.96 x 10⁻⁹ N. Option B is correct.

The gravitational force between two masses can be calculated using the formula;

F=G x (m₁ x m₂) / r²

Where F is the gravitational force, G is the gravitational constant, m₁ and m₂ are the masses of the two objects, and r is the distance between their centers of mass.

In this case, m₁ = 4.0 kg, m₂ = 7.0 kg, r = 1.0 m, and G = 6.67 x 10⁻¹¹ N x m²/kg². Plugging these values into the formula gives;

F = (6.67 x 10⁻¹¹ N x m²/kg²) x (4.0 kg x 7.0 kg) / (1.0 m)²

F = 1.96 x 10⁻⁹ N

Therefore, the gravitational force is 1.96 x 10⁻⁹ N.

Hence, B. is the correct option.

To know more about gravitational force here

https://brainly.com/question/24783651

#SPJ1

--The given question is incomplete, the complete question si

"A 4.0 kg mass is 1.0 m away from a 7.0 kg mass. What is the gravitational force between the two masses? (Remember to use the gravitational constant, G = 6.67 x 10-11 N x m2/ kg2, in your calculation.) A) 6.67 x 10 -11 N B) 1.9 x 10 -9N C) 6.67 x 10 10N D) 3.8 N."--

In a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.
7
Since the half-life is 8 days, we can divide 32 days by the half-life to find the number of half-lives that have occurred: 32 days ÷ 8 days/half-life = 4 half-lives.

Now, for each half-life, the amount of Iodine-131 will decrease by half. After 1 half-life (8 days), 512 mg will become 256 mg. After 2 half-lives (16 days), it will be 128 mg. After 3 half-lives (24 days), it will be 64 mg. Finally, after 4 half-lives (32 days), the amount of Iodine-131 remaining in the sample will be 32 mg.

So, in a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.

To know more about sample, refer here:

https://brainly.com/question/30759604#

#SPJ11

The image produced by a concave mirror when an object is placed at its center of curvature is located at the center of curvature. Option C is correct.

When an object is placed at the center of curvature of a concave mirror, the reflected light rays converge and intersect at the center of curvature. As a result, a real and inverted image of the object is formed at the same location as the object itself, which is the center of curvature.

It is important to note that the image formed by a concave mirror when an object is placed between the center of curvature and the focal point is real, inverted, and located beyond the center of curvature. When the object is placed at the focal point, the reflected light rays become parallel, and no image is formed. Finally, when the object is placed between the mirror and the focal point, the image formed is virtual, upright, and located behind the mirror. Option C is correct.

To know more about the Concave mirror, here

https://brainly.com/question/14351301

#SPJ4

The static shock is caused by the transfer of electrons between surfaces, creating an electric charge buildup that ionizes air molecules, resulting in a spark. Electrons and ions are the subatomic particles involved.

When a person experiences a static shock, it is due to the buildup of excess electric charge on the surface of their body. This excess charge is caused by the transfer of electrons between two surfaces that come into contact and then separate. The transfer of electrons causes an imbalance of charges, resulting in a buildup of static electricity.

The electric charge buildup creates an electric field that can be strong enough to ionize air molecules. This ionization creates a plasma, which is a gas made up of ionized particles. The plasma channels the electric charge from the person's body to the surrounding air, creating a spark that we see as a static shock.

The subatomic particles involved in this process are electrons and ions. Electrons are negatively charged subatomic particles that are transferred between surfaces to create a buildup of static electricity. Ions are atoms or molecules that have gained or lost electrons, resulting in a positive or negative charge.

In summary, a static shock occurs due to the transfer of electrons between surfaces, creating an imbalance of electric charge on the person's body.

This electric charge buildup ionizes air molecules, creating a plasma that channels the electric charge to the surrounding air, resulting in a spark that we see as a static shock. The subatomic particles involved in this process are electrons and ions.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

To make the concert F sound right to the audience, Sammy Hagar and the band should play the note at a frequency of 607 Hz.

The frequency that the audience will hear, denoted as f', is related to the frequency of the source, f, by the formula: f' = f (v + u) / (v - u)

where v is the speed of sound, u is the speed of the observer relative to the medium, and in this case, v = 343 m/s and u = -32 m/s.

When the stage is moving toward the audience, the relative speed of the sound waves is increased, so the frequency heard by the audience is higher. Using the above formula: f' = 540 Hz (343 + 32) / (343 - 32) = 607 Hz

Therefore, to make the concert F sound right to the audience, Sammy Hagar and the band should play the note at a frequency of 607 Hz.

To know more about frequency, refer here:

https://brainly.com/question/14316711#

#SPJ11

It's not just here in the United States that we're seeing this, London has also added this category to their marathon.

This is an example of how society is constantly evolving and recognizing the need for inclusion and diversity. The social construction of gender and gender identity has traditionally been binary, with individuals being categorized as either male or female. However, as society has become more aware and accepting of non-binary gender identities, we are seeing a shift in the way that institutions and organizations are accommodating these individuals.

By creating a non-binary category in marathons, organizers are acknowledging the importance of inclusivity and providing a space for non-binary individuals to participate in sports without being forced to conform to binary gender categories.

Find out more on social construction here: https://brainly.com/question/28631758

#SPJ1

The minimum runway length required for this airplane to reach the required speed for takeoff is 193.41 meters.

(a) To determine if the airplane can reach the required speed for takeoff on a 150m long runway, we can use the equation: v^2 = u^2 + 2as. Here, v is the final speed (27.8 m/s), u is the initial speed (0 m/s, assuming the plane starts from rest), a is the acceleration (2.00 m/s^2), and s is the distance (150m).

27.8^2 = 0^2 + 2(2.00)(150)
773.64 = 600

Since 773.64 > 600, this airplane cannot reach the required speed for takeoff on a 150m long runway.

(b) To find the minimum runway length required for this airplane to take off, we can rearrange the equation: s = (v^2 - u^2) / 2a.

s = (27.8^2 - 0^2) / (2 * 2.00)
s = 773.64 / 4
s = 193.41m

So, the minimum runway length required for this airplane to reach the required speed for takeoff is 193.41 meters.

To know more about speed, refer here:

https://brainly.com/question/19127881#

#SPJ11

The electron density of a conducting wire made of manganese can be calculated by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom.

To determine the electron density of a wire made of manganese, we need to know the number of manganese atoms per unit volume and the number of free electrons per manganese atom. The electron density is defined as the number of free electrons per unit volume of the material.

Assuming the wire is made entirely of manganese, we can calculate the number of manganese atoms per unit volume using the density of manganese, which is 7.43 g/cm³. This can be converted to atoms/cm³ using the atomic weight of manganese, which is 54.94 g/mol, and Avogadro's number.

Next, we need to know the number of free electrons per manganese atom, which is given as 3 in the problem statement. Finally, we can calculate the electron density by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom.

In summary, the electron density of a conducting wire made of manganese can be calculated by multiplying the number of manganese atoms per unit volume by the number of free electrons per manganese atom. This requires knowledge of the density of manganese and the number of free electrons per atom.

To know more about density refer here:

https://brainly.com/question/29359462#

#SPJ11

The magnitude of the Drag force is 0.0117 N

a) To determine the work done by the motor when the wheelchair starts at rest and speeds up to its normal speed, we can use the work-energy theorem:

Work = (1/2) * m * (vf^2 - vi^2)

Where m is the total mass of the wheelchair and person (26 kg + 80 kg = 106 kg), vf is the final speed (24 km/h = 6.67 m/s), and vi is the initial speed (0 m/s).

Work = (1/2) * 106 kg * (6.67 m/s)^2
Work ≈ 1,491.1 J

b) To determine the maximum distance the wheelchair can travel on a horizontal surface at its normal speed, we can use the following formula:

Distance = (Stored energy) / (Power * Time)

First, we need to calculate the time that the wheelchair can run at normal speed:

Time = (Stored energy) / (Power)
Time = 2.4 * 10^6 J / 340 W
Time ≈ 7,058.8 s

Now we can calculate the distance:

Distance = (6.67 m/s) * (7,058.8 s)
Distance ≈ 47,102.4 m

c) To calculate the magnitude of the drag force due to the flexing of the wheelchair's soft rubber tires, we can use the following formula:

Drag force = (Power expended against drag) / (speed)

First, we need to calculate the power expended against drag:

Power expended against drag = 0.00023 * 340 W
Power expended against drag ≈ 0.0782 W

Now we can calculate the drag force:

Drag force = 0.0782 W / 6.67 m/s
Drag force ≈ 0.0117 N

To learn more about magnitude, refer below:

https://brainly.com/question/14452091

#SPJ11

The angular momentum of a 265 kg motorcycle traveling at 25 m/s around a circular curve with a radius of 500 m is [tex]3,312,500 \;kg.m^2/s.[/tex]

To calculate the angular momentum of the motorcycle, we need to first find its angular velocity. Since the motorcycle is traveling around a circular curve, we can use the formula:

[tex]v = r\omega[/tex]

where v is the velocity of the motorcycle, r is the radius of the curve, and ω is the angular velocity.

Rearranging this formula to solve for ω, we get:

[tex]\omega = v/r[/tex]

Substituting the values given, we get:

[tex]\omega = 25 \;m/s \;/ \;500 m = 0.05 \;rad/s[/tex]

Next, we can use the formula for angular momentum:

[tex]L = I\omega[/tex]

where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

For a point mass moving in a circular path, the moment of inertia is simply mr², where m is the mass of the motorcycle and r is the radius of the curve.

Substituting the values given, we get:

[tex]L = (265 \;kg)(500 \;m)^2(0.05 \;rad/s)[/tex]

[tex]L = 3,312,500 \;kg.m^2/s[/tex]

Therefore, the angular momentum of the motorcycle is [tex]3,312,500 \;kg.m^2/s.[/tex]

In summary, the angular momentum of a 265 kg motorcycle traveling at 25 m/s around a circular curve with a radius of 500 m is [tex]3,312,500 \;kg.m^2/s.[/tex]

To know more about angular momentum refer here:

https://brainly.com/question/29563080#

#SPJ11

The change in velocity of the tip of the second's hand in 15 seconds is: [tex]\pi /(30\sqrt2) cm/s[/tex]. The correct option is B.

To determine the change in velocity of the tip of the second's hand, we need to consider that the hand moves in a circular path with a radius of 1 cm. In 15 seconds, the angle covered is (15/60) × 360 = 90 degrees, or π/2 radians.

The initial velocity can be represented as (v1 = rω1) and the final velocity as (v2 = rω2), where r is the radius (1 cm) and ω is the angular velocity. Since the second's hand moves at a constant speed, the angular velocities are equal, and the change in velocity (∆v) can be calculated using the formula:

∆v = √(v1² + v2² - 2*v1*v2cos(π/2))

Since cos(π/2) = 0, the formula simplifies to:

∆v = √(v1² + v2²)

As v1 = v2 = rω,

∆v = √(2(rω)²) = rω√2 = (1cm)(π/30 rad/s)√2 = π/(30√2) cm/s

So, the change in velocity of the tip of the second's hand in 15 seconds is π/(30√2) cm/s. The correct option is B.

To know more about velocity , refer here:

https://brainly.com/question/1482529#

#SPJ11

Complete question:

The length of speed's hand of watch is 1cm the change in velocity of is tip in 15 sec

A. zero

B. π/(30√2)

C. π/30

D. 2π/(30√2)

The period of a simple pendulum of length 1m on a massive planet is 1 sec. The acceleration due to gravity on that planet is 39.48 m/s^2.

A simple pendulum's period is given by:

T = 2π √(L/g)

Where T is the pendulum's period, L is its length, and g is the acceleration due to gravity.

In this scenario, the pendulum's period is one second and its length is one metre.

So, from above equation, we have:

1 = 2π √(1/g)

Squaring both sides, we get:

1^2 = (2π)^2 (1/g)

Simplifying, we get:

g = (4π^2)/1 = 39.48 m/s^2

Therefore, the acceleration due to gravity on the massive planet is 39.48 m/s^2.

For more such questions on simple pendulum, click on:

https://brainly.com/question/26449711

#SPJ11

The motion of a 0.500-kg glider attached to an ideal spring with a force constant of k=450m can be analyzed in terms of mechanical energy. Mechanical energy is the sum of kinetic energy and potential energy, and is conserved in a closed system with no external forces acting on it.

As the glider moves back and forth on the spring, its kinetic energy varies with its speed and its potential energy varies with its position. At any point in its motion, the total mechanical energy of the glider is equal to the sum of its kinetic and potential energy.

At the maximum compression of the spring, the glider has zero velocity and maximum potential energy. As it moves away from this point, the spring begins to expand and the glider begins to move faster, converting potential energy into kinetic energy. At the point where the spring is fully extended, the glider has maximum velocity and zero potential energy.

As the glider continues to move back towards the spring's rest position, it begins to slow down and convert kinetic energy back into potential energy. At the point of maximum compression again, the glider has zero velocity and maximum potential energy once more.

Throughout its motion, the total mechanical energy of the glider remains constant, as there are no external forces acting on the system. This means that the sum of the kinetic and potential energy at any point in its motion is equal to the total mechanical energy of the system.

In summary, the mechanical energy of a glider attached to an ideal spring can be analyzed at any point in its motion by considering the conversion of potential energy into kinetic energy and vice versa. The total mechanical energy of the system is constant throughout its motion, making it a useful tool for analyzing the behavior of the glider on the spring.

To know more about Mechanical energy refer here

https://brainly.com/question/29509191#

#SPJ11

Answer:

Three states of matter exist—solid, liquid, and gas. Solids have a definite shape and volume. Liquids have a definite volume,

Explanation:

According to the information, the table is completed as follows: Do they have definite shape? no (vapor), no (water), yes (ice); Do they have definite volume? no (vapor), yes (water), yes (ice); Do they compress? yes (vapor), no (water), no (ice).

To fill the table to describe the characteristics of the states of matter we have to look for additional information of each state of matter and then complete the table. According to the information we can infer that the correct way to complete the table is:

Do they have definite shape? no (vapor), no (water), yes (ice); Do they have definite volume? no (vapor), yes (water), yes (ice); Do they compress? yes (vapor), no (water), no (ice).

Vapor | No | No | Yes

Water | No | Yes | No

Ice | Yes | Yes | No

Learn more about states of matter in: https://brainly.com/question/29069107

#SPJ1

The minimum horizontal force required to cause the lower block to slide out from under the upper block is F = μs(Mg + mg)

Let's consider the forces acting on the lower block. The weight of the block is mg, where g is the acceleration due to gravity. The normal force acting on the block is N = Mg + mg, where M is the mass of the upper block. The maximum static frictional force that can act between the two blocks is μsN.

If the applied force is F, the net force acting on the lower block is F - μsN. If this net force is greater than zero, the block will slide. Therefore, we can write:

F - μsN > 0

Substituting for N, we get:

F - μs(Mg + mg) > 0

Solving for F, we get:

F > μs(Mg + mg)

Therefore, the minimum horizontal force required to cause the lower block to slide out from under the upper block isF = μs(Mg + mg).

Learn more about force on

https://brainly.com/question/12970081

#SPJ1

One material resource that is potentially renewable if managed well is wood.

Wood can be obtained from trees, which are a renewable resource if they are harvested and replanted in a sustainable manner.

Sustainable forest management practices ensure that forests are used in a way that meets the needs of the present without compromising the ability of future generations to meet their own needs.

Wood is used for various purposes, such as construction, furniture, paper, and energy production. By managing forests well, we can ensure a continuous supply of wood for these purposes.

To know more about renewable resource refer here

https://brainly.com/question/19604560#

#SPJ11