a weightlifter lifts a 2,000 newton weight a vertical distance of 0.5 meter in 0.1 second. what is the power output?

Two similarities between electric and magnetic field lines are:
1. Direction: Both electric and magnetic field lines represent the direction of the force exerted on a charged particle or a magnetic pole.

Electric field lines originate from positive charges and terminate at negative charges, while magnetic field lines show the direction a north magnetic pole would move within the field.
2. Field strength: In both electric and magnetic fields, the field strength is proportional to the density of the field lines. More closely spaced lines indicate a stronger field, and the strength decreases as the lines become farther apart.
Two differences between electric and magnetic field lines are:
1. Origin and termination: Electric field lines originate from positive charges and terminate at negative charges, indicating the direction of the electric force.

Magnetic field lines, however, form closed loops, as they originate from the north pole of a magnet and terminate at the south pole, representing the continuous nature of the magnetic field.
2. Flux through a closed surface: For electric fields, the net electric flux through a closed surface is proportional to the total enclosed charge, as described by Gauss's Law.

In contrast, for magnetic fields, the net magnetic flux through any closed surface is always zero.

This is because magnetic field lines form closed loops, and there are no isolated magnetic poles (monopoles) in nature, which means that the magnetic field lines that enter a closed surface must also exit it.

For similar question on electric.

https://brainly.com/question/26978411

#SPJ11

Pressure is defined as the force per unit area. It is the amount of force applied to a given area and is a measure of the average kinetic energy of a collection of particles. For example, the speed of a particle that has the average kinetic energy of the entire sample will affect the pressure.

Kinetic energy is the energy associated with the motion of an object. It is a scalar quantity that is proportional to the square of an object's velocity. The kinetic energy of an object is directly proportional to the square of its velocity. The faster an object is moving, the more kinetic energy it has.

The speed of a particle with the average kinetic energy of the whole sample is determined by the temperature of the system. The temperature of a system is a measure of the average kinetic energy of its particles. The faster the particles are moving, the higher the temperature is, and the more kinetic energy they have.

Therefore, the answer to the question is that pressure is defined as the force per unit area.

Learn more about pressure:

https://brainly.com/question/28012687

#SPJ11

Answer:The energy transfer that occurs during the generation of electricity by wind turbines is from kinetic energy to electrical energy. Wind turbines harness wind energy and convert it into rotational motion of the blades, which in turn rotates a generator that generates electricity. The kinetic energy of the wind is transformed into mechanical energy of the blades, which is then converted into electrical energy. Therefore, the energy transfer that occurs in wind turbines is from the wind's kinetic energy to electrical energy. This is a clean and renewable source of energy that does not involve the burning of fossil fuels, making it an environmentally friendly option for generating electricity.

When a force of 3 pounds compresses a 15-inch spring a total of 3 inches, the work done is 1.35 ft-lbs. The question is 4/3 ft-lbs work is done in compressing the spring 8 inches.

To solve this problem, we can use Hooke's law and the work-energy principle.

Hooke's law states that the force required to compress or extend a spring is proportional to the displacement.

Mathematically, this can be expressed as:

F = -kx

where F is the force, x is the displacement, and k is the spring constant.

The negative sign indicates that the force is opposite to the direction of displacement.

In this problem, we are given that a force of 3 pounds compresses a 15-inch spring a total of 3 inches. This means that the spring constant is given by:

k = F/x = 3/3 = 1 pound per inch

Using Hooke's law, we can find the force required to compress the spring 8 inches:F = -kx = -1(8) = -8 pounds

The negative sign indicates that the force is compressive, i.e. in the opposite direction of displacement.

To find the work done, we need to integrate the force over the displacement.

Since the force is not constant, we need to use calculus.

W = ∫ F dx = ∫ -kx dx = -kx²/2

where W is the work done, F is the force, and x is the displacement.

We can substitute the values we have:

k = 1 pound per inchx = 8 inches

W = -kx²/2 = -(1/12) × (8)² = -4/3 ft-lbs

Since the work done is negative, this means that the force is doing work against the spring, i.e. the spring is doing negative work.

To find the absolute value of the work done, we take the magnitude:

|W| = 4/3 ft-lbs

Therefore, the work done in compressing the spring 8 inches is 4/3 ft-lbs.

For similar question on work done

https://brainly.com/question/8119756

#SPJ11

When a falling object reaches terminal velocity, the force of gravity is equal to the force of air resistance.

Terminal velocity is the maximum velocity that an object can achieve while falling through a fluid, such as air or water, due to the opposing forces of gravity and air resistance or drag.

When an object is first dropped, it will accelerate due to the force of gravity pulling it down. However, as the object's speed increases, the force of air resistance or drag also increases, until it reaches a point where it exactly balances out the force of gravity. At this point, the object will no longer accelerate and will fall at a constant speed, which is its terminal velocity.

Learn more about terminal velocity at:

https://brainly.com/question/30466634

#SPJ1

The peak voltage of the generator is 25.07 V

To calculate the peak voltage of a generator that rotates its 250 turns, 0.100 m diameter coil at 3600 rpm in a 0.840 T field, you can use the equation for the induced emf in a generator, which is

E = NBAω.

Here, E is the induced emf, N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil. To find the peak voltage, we need to multiply this induced emf by the square root of 2. Here's how to do it:

Number of turns N = 250, Diameter d = 0.100 m, Radius r = d/2 = 0.050 m, Angular velocity ω = 3600 rpm = 377 rad/s, Magnetic field strength B = 0.840 T,

Formula: E = NBAω

Peak voltage, Vmax = √2E

Using the above formula and substituting the given values, we have:

E = NBAωE = (250)(0.050²)(0.840)(377)

E = 125.25 V

Peak voltage, Vmax = √2E = √(2)(125.25) = 25.07 V

Therefore, the peak voltage of the generator is 25.07 V.

Learn more about voltage and generator at: https://brainly.com/question/1557678

#SPJ11

In the given scenario, a nonmetallic-sheathed cable is used to connect a wall-mounted oven. The insulated conductors are 10 AWG. Therefore, the size of the equipment grounding conductor in this cable is 10 AWG.

What is a nonmetallic-sheathed cable? A nonmetallic-sheathed cable is a cable used in houses and buildings for installing electrical outlets, switches, and other electrical devices. It contains 2 or more insulated conductors and a bare grounding conductor that is not a part of the circuit.

The bare grounding conductor is designed to reduce the risk of electrical shock and damage by providing a low resistance path to ground. In case of a short circuit or ground fault, the grounding conductor diverts the current to the ground wire, causing a fuse or circuit breaker to trip.

Ground fault circuit interrupters (GFCIs) are often used to protect against electric shock from a nonmetallic sheathed cable.

What is equipment grounding conductor?

An equipment grounding conductor is a conductor that is intended to carry ground-fault current from the point of a ground fault on the equipment back to the source. Grounding conductors are essential for ensuring safety and preventing damage to electrical equipment. In the given scenario, the size of the equipment grounding conductor in the nonmetallic-sheathed cable is 10 AWG.

To learn more about grounding conductor refer to: brainly.com/question/14176453

#SPJ11

Hello and regards obajimi57

Therefore, the acceleration that the 50 Newton unbalanced force gives to the 0.025 kg mass is 2000 m/s^2.

We are solving an exercise of Newton's second law.

Newton's second law states that the net force acting on an object is proportional to the object's mass and its acceleration. In mathematical terms, it is expressed as follows:

This equation indicates that if a net force acts on an object, the object's mass determines the amount of acceleration it will experience in response to that force. That is, the greater the mass, the more difficult it is to accelerate the object with the same force, and the greater the applied force, the faster the object will accelerate.

Newton's second law formula is expressed as:

Net force = mass x acceleration

where:

It tells us that an unbalanced force of 50 Newton acts on a mass of 0.025 kg, here we calculate the acceleration; so

a = F/m

a = 50 N/0.025 kg

a = 2000 m/s²

Therefore, the acceleration that the 50 Newton unbalanced force gives to the 0.025 kg mass is 2000 m/s^2.

＼(^_^ )If you want to learn more, I share this link to complement your learning:

https://brainly.com/question/18994284

[tex]\Large\bold{SOLUTION}[/tex]

We can use Newton's second law of motion to solve this problem, which states that the net force acting on an object is equal to its mass times its acceleration. Mathematically, this can be expressed as:

where:

In this problem, we are given that an unbalanced force of 50 newtons acts on a 0.025 kg mass. So, we can plug these values into the equation above and solve for acceleration:

Therefore, the acceleration of the 0.025 kg mass due to the unbalanced force of 50 N is [tex]2000\: m/s^2[/tex].

[tex]\rule{200pt}{5pt}[/tex]

The beat frequency is 16 Hz and the average frequency is 562 Hz.

When two sound waves of slightly different frequencies are played simultaneously, the resulting sound wave will have a fluctuation in amplitude known as beats. The beat frequency is the difference between the two frequencies.

The beat frequency is the absolute difference between the frequencies of the two speakers.

Beat frequency = |570 Hz - 554 Hz| = 16 Hz

The average frequency is the arithmetic mean of the two frequencies.

Average frequency = (570 Hz + 554 Hz) / 2 = 562 Hz

To know more about beat frequency, here

brainly.com/question/14705053

#SPJ4

Leeward lifting is not a mechanism of air lift. So the correct answer is Option: 1.

The other three options, orographic lifting, convective lifting, and convergence, are all mechanisms that can cause air to lift and rise. Orographic lifting occurs when air is forced to rise over a mountain or other topographic barrier, while convective lifting occurs due to the heating of the Earth's surface, causing air to rise and form clouds. Convergence lifting occurs when two air masses with different characteristics collide and cause the air to rise. All of these mechanisms play important roles in weather patterns and can lead to the formation of clouds, precipitation, and other atmospheric phenomena. Option : 1 is correct.

To know more about orographic lifting, here

brainly.com/question/8912667

#SPJ4

--The complete question is, Which is NOT a mechanism of air lift?

The direction of the friction force is opposite to the direction of the velocity of a sliding object. This means that the friction force acts in the direction opposite to the motion of the object.

When an object slides on a surface, there is often a resistance to its motion called friction. Friction arises due to the interaction between the surfaces in contact and can slow down or stop the object's motion. The friction force always acts in a direction opposite to the direction of motion, or velocity, of the sliding object. This is because the friction force is caused by the irregularities in the surfaces, which push against each other as the object moves. The force of friction is proportional to the normal force pressing the surfaces together, and the coefficient of friction between the surfaces. Understanding the direction of the friction force is important in many practical applications, such as braking systems in vehicles.

learn more about friction force here:

https://brainly.com/question/30280752

#SPJ4

The speed v1 that will cause the vehicle to roll completely over to its right side is approximately 0.91 m/s.

To estimate the speed v1 that will cause the vehicle to roll completely over to its right side, we can follow these steps:

1. Identify the given parameters: mass (m) = 2300 kg, moment of inertia (Ig) = 900 kg m².

2. Recognize that the vehicle's kinetic energy will be converted into gravitational potential energy during the tipping process.

3. Calculate the initial kinetic energy (KE) of the vehicle: KE = 0.5 * m * v1²

4. Calculate the gravitational potential energy (PE) at the tipping point: PE = m * g * h, where g is the acceleration due to gravity (9.81 m/s²) and h is the height of the vehicle's center of mass above the ground.

5. Set KE equal to PE, and solve for v1: 0.5 * m * v1² = m * g * h

6. As we don't have the height (h) of the vehicle's center of mass, we can use the moment of inertia (Ig) to determine the relationship between v1 and h: Ig = m * h². From this, we can solve for h: h = sqrt(Ig/m)

7. Substitute the expression for h in the previous equation:

0.5 * m * v1² = [tex]m \times g \times \sqrt{\frac{Ig}{m} }[/tex]

8. Solve for v1: v1 = [tex]\sqrt{2 \times g \times {\sqrt{\frac{Ig}{m} }/ {m} }}[/tex]

9. Plug in the given values and calculate v1: v1 = sqrt((2 * 9.81 * sqrt(900/2300))/2300) = sqrt(0.830) ≈ 0.91 m/s

For more details about speed click here:

https://brainly.com/question/28224010#

#SPJ11

The effective spring constant k of the two-spring system is: k = k1k2 / (k1 + k2).

Given that two massless springs are connected in series.
Spring 1 has a spring constant k1, and spring 2 has a spring constant k2.

A constant force of magnitude f is being applied to the right. When the two springs are connected in this way, they form a system equivalent to a single spring of spring constant k.

To determine the effective spring constant k of the two-spring system:
The displacement x1 of the mass m1 of the first spring with a spring constant k1 can be written ask1x1 = f ----(1)
The displacement x2 of the mass m2 of the second spring with a spring constant k2 can be written ask2x2 = k1x1 ----(2)
Total force on the mass m2 of the second spring F= f-k1x1----(3)
Since the system is equivalent to a single spring with a spring constant k, the total force F can be written askx= kx----(4)

Equating (3) and (4) gives, f - k1x1 = kx---(5)
Replacing x1 from (1), we get:f - k1(f/k1) = kxOr,f = kx --- (6)

From equations (5) and (6), we can find the effective spring constant k of the two-spring system by equating both equations, we get:kx = f - k1x1

Solving for k, we get: k = k1k2 / (k1 + k2)

To know more about " Two-spring system" refer here:

https://brainly.com/question/29972665

#SPJ11

Answer:

Explanation:

B

Two waves travel at the same speed. The frequency of wave A is 1000 Hz, and the frequency of wave B is 4000 Hz. Wavelength A is 0.25 meters.

Wavelength, frequency, and speed are interrelated in a mathematical relationship known as the wave equation:

v = fλ

Where: v = velocity of the wave

f = frequency

λ = wavelength

The velocity of a wave is equivalent to the product of its wavelength and frequency. In addition, since the two waves in this situation are traveling at the same speed, their wavelengths are inversely related to their frequencies. As a result, the formula for wavelength is:

wavelength = velocity/frequency

Substituting the given values in the equation,

wavelength A = velocity/frequency A

wavelength A = 300/1000

wavelength A = 0.3 meters

The frequency of wave A is 1000 Hz, and the frequency of wave B is 4000 Hz. Wavelength A is 0.3 meters.

For more question on speed click on

https://brainly.com/question/27888149

#SPJ11

Answer:

it is 17 dollars .

Explanation:

I had a test like this and I remember the qeustions

A 9.0-V battery costs $3.00 and will deliver 0.0250 A for 26.0 h before it must be replaced. then the cost per kWh is $512.82.

Energy is nothing but the ability to do work. there are different energies in different form which are thermal energy, mechanical energy, electric energy and sound energy etc. According to first law of thermodynamic, Energy neither be created nor be destroyed. it can only be transferred from one form into another form. Energy is expressed in joule (J). its dimensions are [M¹ L² T⁻²].

The energy delivered by the battery can be calculated using the formula:

energy = power x time

where power is the product of voltage and current, and time is given in hours.

The power delivered by the battery is:

power = voltage x current = 9.0 V x 0.0250 A = 0.225 W

The time for which the battery will deliver this power is 26.0 hours.

So, the energy delivered by the battery is:

energy = power x time = 0.225 W x 26.0 h = 5.85 Wh

To convert Wh to kWh, we divide by 1000:

energy = 5.85 Wh ÷ 1000 = 0.00585 kWh

The cost per kWh can be calculated by dividing the cost of the battery by the energy delivered, and then multiplying by 1000 to convert to dollars per kWh:

cost per kWh = (3.00 dollars / 0.00585 kWh) x 1000 = 512.82 dollars/kWh (rounded to two decimal places)

Therefore, the cost per kWh for this battery is $512.82.

To know more about Power :

https://brainly.com/question/29575208

#SPJ2.

(A) Moment of inertia about an axis that passes through the intersection of the two segments, Ia = 1/12 ML². (B) Moment of inertia travelling via the intersection of the line's two ends and midpoint, Ix = 1/3 ML²

(A) The moment of inertia about an axis passing through the intersection of the two segments will be the same if the rod is bent at the centre and the distance between all of the points and the axis stays constant i.e. Ia = 1/12 ML²

(B) Calculate the moment of inertia on a line connecting the two ends and passing through a point midway along it.

Determine the distance between the ends as a first step ( d )

After utilizing Pythagoras's principle

d =√2/2L

Determine the distance between the two axes as the next step ( x )

After utilizing Pythagoras's principle

x =√3/4/L

Compute the value of Ix as the last step.

the Parallel Axis Theorem is applied

Iₓ = Iₐ + Mx²

Iₓ = 1/12ML² + 1/4 ML²

Iₓ = 1/3ML²

This leads us to the following conclusions: Moment of inertia passing through the place where the two segments meet is  Ia = 1/12 ML², about an axis: Moment of inertia passing through the point where the line's midpoint meets its two ends is Ix = 1/3 ML²

To know more about inertia

https://brainly.com/question/15867038

#SPJ4

Answer:

The concept of unstable equilibrium can be used in the design of everyday objects such as switches or alarms by ensuring that an object is positioned in a way that requires a small amount of force to cause it to tip over and trigger the switch or alarm.

For example, in a light switch, the switch lever can be designed to be in a position where it is balancing on a pivot point, such that a slight push up or down will cause it to tip one way or the other, and thus activate or deactivate the switch.

Similarly, in an alarm system, a small amount of force applied to a specific point can tip over a weight, causing it to fall and trigger the alarm.

By using unstable equilibrium designs in the design of switches or alarms, the objects can be made more sensitive and responsive to user actions, without requiring a significant amount of force to activate them.

The reflectivity of an asteroid can be determined by comparing its brightness in visible light to its brightness in infrared light. The correct answer is option A.

The term "albedo" refers to the reflectivity of a celestial body, such as an asteroid. It refers to the amount of light that is reflected from an object's surface. Albedo is a term that astronomers and scientists use to describe the amount of light reflected by a celestial object. Scientists measure an asteroid's albedo by comparing its brightness in visible light to its brightness in infrared light.

Therefore, Option A is the correct answer to the question of how we can determine the reflectivity of an asteroid. By comparing its brightness in visible light to its brightness in infrared light.

Learn more about albedo here: https://brainly.com/question/13387390

#SPJ11

The new angular speed of the student is 0.592 rad/s.

We can use the conservation of angular momentum to solve this problem:

Initial angular momentum = final angular momentum

The initial angular momentum is given by:

L1 = I1ω1

where I1 is the moment of inertia of the student plus stool plus extended objects, and ω1 is the initial angular speed.

The final angular momentum is given by:

L2 = I2ω2

where I2 is the moment of inertia of the student plus stool plus objects with the objects pulled in, and ω2 is the final angular speed.

Since the moment of inertia changes when the objects are pulled in, we need to use the parallel axis theorem to calculate I2:

I2 = I1 + 2mr2

where m is the mass of each object (2.9 kg), and r is the distance from the rotation axis to the objects (0.26 m).

Plugging in the numbers, we get:

I2 = 3.4 kg m² + 2(2.9 kg)(0.26 m)²

I2 = 3.4 kg m² + 0.644 kg m²

I2 = 4.044 kg m²

Now we can solve for ω2:

L1 = L2

I1ω1 = I2ω2

(3.4 kg m² )(0.7 rad/s) = (4.044 kg m² )ω2

ω2 = (3.4 kg m² )(0.7 rad/s)/(4.044 kg m² )

ω2 = 0.592 rad/s

Therefore, the new angular speed of the student is 0.592 rad/s.

learn more about angular speed here

https://brainly.com/question/6860269

#SPJ1

When we draw loop within a wire that carries current uniformly across its circular cross-sectional area, the value of the integral in Ampere's law is proportional to the current encircled by the loop.

Ampere's law is an equation that represents the relationship between the current and the magnetic field produced by that current. It states that the magnetic field created by a current-carrying wire can be calculated by integrating the product of the magnetic field and the length of the wire around a closed path (Amperian loop).

An Amperian loop is a loop-like path used to calculate the magnetic field created by a current-carrying wire using Ampere's law.

An Amperian loop encircles the wire, and the magnetic field created by the current passing through the wire is perpendicular to the loop's surface.

The value of the integral in Ampere's law is proportional to the current encircled by the loop.

Therefore, if the Amperian loop encircles a section of wire that carries more current, the integral will be higher. If the Amperian loop encircles a section of wire that carries less current, the integral will be lower.

To know more about Ampere's law here :

https://brainly.com/question/1476646

#SPJ11

he angular velocity at which the riders will be subjected to a centripetal acceleration whose magnitude is equal to 1.50 times the acceleration due to gravity is: 10.986 rev/min.

The formula for the centripetal acceleration is as follows:
ac=ω2r
where ac = centripetal acceleration,
ω = angular velocity, and r = radius.

We are given the following values:
ac = 1.50g = 1.50(9.81 m/s2) = 14.715 m/s
2r = 11.0 m

Substituting these values into the formula, we get:14.715 m/s2 = ω2(11.0 m)

Rearranging the equation, we get:ω2 = 14.715 m/s2 / (11.0 m)ω2 = 1.3386

Taking the square root of both sides, we get:ω = 1.1577 radians/s

Converting this value to revolutions per minute, we get:ω = (1.1577 rad/s) / (2π rad/rev) x (60 s/min)ω = 10.986 rev/min

To know more about "Centripetal acceleration" refer here:

https://brainly.com/question/144651195#

#SPJ11

The first billiard ball moves in the x-direction with a velocity of 50.0 cm/s after the collision, while the second ball stops. The first ball moves in the same direction as before the collision, indicating a conservation of direction.

The first ball was moving in the x-direction with a velocity of 30.0 cm/s and after the collision, it moved in a direction that is a combination of the x and y directions with a velocity of 50.0 cm/s. The second ball was moving in the y-direction with a velocity of 40.0 cm/s and stopped after the collision. Therefore, the final direction of the first ball can be found using trigonometry. Let's define θ as the angle between the x-axis and the direction of motion of the first ball after the collision. Then, we can use the following equation:

tan(θ) = (final velocity in the y-direction) / (final velocity in the x-direction)

tan(θ) = 0 / 50.0

θ = 0 degrees

Therefore, the first ball moves in the x-direction after the collision, with no change in direction.

Learn more about velocity here: brainly.com/question/17127206

#SPJ4

The initial ball advances in the final direction at an angle of 53.13 degrees above the x-axis. We must compute the angle the initial ball makes with the x-axis in order to determine its final orientation.

The issue includes a collision between two pool balls, the ultimate velocity and direction of the first ball needing to be calculated, and the initial velocities of the balls are known. The final velocity and angle of the first ball can be calculated using the laws of conservation of momentum and energy. Since the second ball stops after the collision, it is possible to solve for the first ball's end velocity in terms of the beginning velocities and masses by writing the momentum equations in the x- and y-directions.  We can determine the final direction of the first ball by solving for the angle.The initial ball advances in the final direction at an angle of 53.13 degrees above the x-axis.

Learn more about direction here:

https://brainly.com/question/13899230

#SPJ4

The linear velocity of the ball at the bottom of the ramp is v = √(10gh/7).

We can use the principle of conservation of energy to solve this problem. At the top of the ramp, the ball has potential energy mgh due to its height h above the bottom of the ramp. At the bottom of the ramp, all of this potential energy has been converted to kinetic energy, which is the sum of the translational kinetic energy (0.5mv^2) and the rotational kinetic energy (0.5Iω^2) of the ball.

Since the ball is rolling without slipping, we can relate the translational and rotational kinetic energies using the moment of inertia I = (2/5)mr^2, where r is the radius of the ball.

Thus, we have,

mgh = 0.5mv^2 + 0.5(2/5)mr^2(v/r)^2

Simplifying and solving for v,

v = √(10gh/7)

To know more about velocity, here

brainly.com/question/29140494

#SPJ4

The speed of the upper end of the pole just before it hits the ground is approximately 6.03 m/s.

We can make use of energy saving to resolve this issue.

Due to its height above the earth, the pole has potential energy when it is balanced on its tip.

This potential energy is transformed into kinetic energy as it descends, and kinetic energy is proportional to the square of the speed of the pole's upper end.

The speed of the upper end just before it touches the earth can be determined using the energy conservation principle.

PE = mgh,

where m is the pole's mass, g is gravity's acceleration,

and h is the pole's height above the earth, calculates the pole's potential energy when it is balanced on its tip.

We can disregard the pole's mass for the time being because it cancels out when we apply the principle of conservation of energy.

The pole has lost half of its potential energy when its upper end is at a height h/2 above the ground, which is equivalent to

PE = (1/2) mgh.

KE = (1/2) mv2,

where v is the speed of the pole's upper end just before it strikes the earth, represents the transformation of this potential energy into kinetic energy.

When we divide the kinetic energy obtained by the potential energy lost, we get.

[tex](1/2) mgh = (1/2) mv^2[/tex]

Since the pole's mass balances out, we can determine v:

v equals sqrt(gh)

By replacing the specified numbers,

Substituting the given values, we get:

v = [tex]\sqrt{(9.81 m/s^2 x 2.3 m) }[/tex]

= 6.03 m/s

For similar question on speed.

https://brainly.com/question/26046491

#SPJ11

The answer's 3.487 x 105 g is the one with the right number of significant figures.

We also round a number to three significant numbers when rounding to three decimal places. Zeros are inserted into any void spaces to the right of the decimal point.

We must take into account the significant figures in the original numbers being added in order to establish the number of significant figures in the solution.

4.667 x 104 g has 4 significant figures, since all non-zero digits are significant.

3.02 x 105 g has 3 significant figures, since the trailing zero is not significant (it only serves to indicate the magnitude of the value).

When we add these values together, we get 3.487 x 105 g.

To know more about significant figures visit:-

brainly.com/question/14804345

#SPJ1

With a potential difference of 14 volts across it, the 10.0 ohm resistor dissipates 19.6 watts of electrical power.

Any equation connecting power to current, voltage, and resistance may be used to calculate the power wasted by each resistor.

The following formula must be used to determine the amount of electrical power a resistor dissipates in a parallel circuit:

P = V²/R

In this case, the resistance is 10.0 ohms and the potential difference is 14 volts.

These values are combined together to give us:

P = (14 V)²/ 10.0 Ω

P = 196 V²/ 10.0 Ω

P = 19.6 W

To know more about electrical power visit:-

https://brainly.com/question/29869646

#SPJ1

The maximum tension that a string can withstand is given as 92.0 N. We want to find out what the maximum acceleration that the elevator can have before the upper string breaks. Therefore, we cannot find the acceleration without knowing the mass of the elevator.

To find the maximum acceleration, we need to consider the forces acting on the elevator. There are two forces: the force due to gravity (weight) and the tension in the string (upward force).Since the elevator is moving upwards, the acceleration will be in the same direction as the tension force.

Therefore, we can set up an equation that relates the tension and the acceleration:

[tex]F_{net}[/tex] = T - mg where[tex]F_{net}[/tex] is the net force (which is equal to ma), T is the tension in the string, m is the mass of the elevator, and g is the acceleration due to gravity.

Substituting [tex]F_{net}[/tex] and T in the equation and solving for a, we get: a = (T - mg) / m .

The tension in the string is given as 92.0 N, and the mass of the elevator is not given. Therefore, we cannot find the acceleration without knowing the mass of the elevator.

Know more about   tension force   here:

https://brainly.com/question/29307054

#SPJ11

Yes, the RMS voltage across the capacitor should have agreed with the value of V0/√2 at 1000 Hz.

A capacitor has a voltage that alternates with time. This voltage varies as a sinusoidal waveform, similar to AC voltage. The RMS voltage across a capacitor is defined as the voltage that would produce the same heating effect as the capacitor's voltage if applied continuously.

The RMS voltage is used to represent the voltage of an AC circuit. When the AC voltage applied to a capacitor reaches its peak, it is V0, and the RMS voltage is V0/sqrt(2).

This is the voltage that would produce the same heating effect as the capacitor's voltage if applied continuously.

Therefore, at 1000 Hz, the RMS voltage across the capacitor would agree with the value V0/sqrt(2). These values should have agreed.

Know more about capacitor here:

https://brainly.com/question/21851402

#SPJ11

Based on the information provided, crude oil can best be classified as a mixture of compounds which is option A.

The fact that it can be separated into different chemicals with varying densities indicates that it is not a pure substance. Additionally, the components of crude oil are not chemically bonded together in a specific ratio, which is a characteristic of mixtures. Finally, the components of crude oil are not uniformly distributed, which rules out the possibility of it being a solution of heterogeneous substances. Therefore, option A, a mixture of compounds, is the best classification for crude oil based on the given information.

learn more about compounds here:

https://brainly.com/question/3648919

#SPJ1

The vertical height of the hill is 36.75 m.

Given values the following values are given in the problem statement: Hill vertical drop h is unknown. The coefficient of friction is given as 0.16. The distance covered by the child while sliding across the level stretch is given as 19 m. Concept of energy conservation according to the concept of energy conservation, the potential energy at the top of the hill gets converted to kinetic energy at the bottom of the hill. Kinetic energy, in turn, gets converted to work done by friction, and hence the final kinetic energy is less than the initial kinetic energy. The net work done by all forces acting on the child will be equal to the change in kinetic energy. W = ΔKWe can calculate the change in kinetic energy as follows:ΔK = (1/2) mvf² - (1/2) mvi²where m is the mass of the child, vi is the initial velocity, and vf is the final velocity. The work done by friction force can be calculated as follows: Wf = f × where f is the frictional force acting on the child, and d is the distance covered by the child while sliding across the level stretch. The total work done by friction force will be equal to the change in kinetic energy, as given below: Wf = ΔKThe gravitational potential energy at the top of the hill can be calculated as follows: PE = where m is the mass of the child, g is the acceleration due to gravity, and h is the vertical height of the hill. The final velocity of the child can be calculated as follows: vf = √(2gh)The work done by friction force can be calculated as follows: Wf = f × d = μmgdwhere μ is the coefficient of friction, and Wf is the work done by the friction force on the child. Calculations The gravitational potential energy at the top of the hill can be calculated as follows: PE = mgt…………….. (1)The final velocity of the child can be calculated as follows:

vf = √(2gh) …………….. (2)

The change in kinetic energy can be calculated as follows:

ΔK = (1/2) mvf² - (1/2) mvi² …………….. (3)

The work done by friction force can be calculated as follows:

Wf = μmgd …………….. (4)

From the principle of conservation of energy, we have

Wf = ΔK = (1/2) mvf² - (1/2) mvi² …………….. (5)

Substituting the values in the above equations and solving them, we get h = 36.75

To learn more about Height ;

https://brainly.com/question/28308143

#SPJ11