The total traffic in Erlang for this cell with 120° degree sectorization is 1.61 Erlangs. is the answer.
In cellular systems, the Grade of Service (GOS) is the probability of a call being blocked during the busiest hour of traffic. It is typically represented as a percentage of the total number of calls attempted during that hour. For a given GOS and traffic load, the number of required channels or circuits can be calculated.
Let us try to solve the given problem. It is given that A=40EA=60EA=30EA=50EGOS = 1% Sectorization = 120°
The total traffic in Erlang for this cell will be determined as follows:
From the above-given data, Total traffic = (A/60) * (E/60)
Here, A is the total call time per hour and E is the total number of calls per hour.
Total traffic for the given cell = [(40/60) * (60/60)] + [(60/60) * (60/60)] + [(30/60) * (60/60)] + [(50/60) * (60/60)] = 2.5 + 1 + 0.5 + 0.83 = 4.83 Erlangs
Now, for the 120° degree sectorization, the traffic carried by each sector is calculated as follows: Traffic in each sector = (1/3) * Total traffic carried by cell
Traffic in each sector = (1/3) * 4.83 = 1.61 Erlangs
Therefore, the total traffic in Erlang for this cell with 120° degree sectorization is 1.61 Erlangs.
know more about probability
https://brainly.com/question/32117953
#SPJ11
Find an expression for the time response of a first order system to a ramp function of slope Q
Answer:
The time response of a first order system to a ramp function of slope Q can be expressed as:
y(t) = Kp * Q * t + y(0)
where y(t) is the output response at time t, Kp is the process gain, Q is the slope of the ramp input, and y(0) is the initial output value.
Explanation:
Submit your codes with ful windows screenshots on Canvas 1. Rijon has taken MAT116 this semester and got tired of solving the same quadratie equation for different values. So, he decides to write a C program where he can give the values as input in the main function, then pass them into a user-defined function called void solveQ(float x1, float x2, int a, int b, int c) and then print the results(x1, x2) from the main() function. Now write a C program implementing the solved function to help Rijon calculate the quadratic equation results. -b+v(b2-400) & x2 = -b-1(b2-sac), [Formula for Quadratic equation, x1 = 2a 2a Sample Input Enter a: 2 Enter b: 4 Enter c: 1 Sample Output x1 = -0.293 x2 = -1.707
The C program provided below implements a user-defined function called `solveQ()` that calculates the roots of a quadratic equation based on the values entered in the `main()` function.
```c
#include <stdio.h>
#include <math.h>
void solveQ(float x1, float x2, int a, int b, int c) {
float discriminant = b * b - 4 * a * c;
if (discriminant >= 0) {
x1 = (-b + sqrt(discriminant)) / (2 * a);
x2 = (-b - sqrt(discriminant)) / (2 * a);
printf("x1 = %.3f\n", x1);
printf("x2 = %.3f\n", x2);
} else {
printf("No real roots\n");
}
}
int main() {
int a, b, c;
float x1, x2;
printf("Enter a: ");
scanf("%d", &a);
printf("Enter b: ");
scanf("%d", &b);
printf("Enter c: ");
scanf("%d", &c);
solveQ(x1, x2, a, b, c);
return 0;
}
```
In the program, the `solveQ()` function calculates the discriminant of the quadratic equation using the formula `b * b - 4 * a * c`. If the discriminant is non-negative, the function proceeds to calculate the roots `x1` and `x2` using the quadratic formula and prints the results with three decimal places. If the discriminant is negative, it means that the equation has no real roots, and the function prints a message stating so.
In the `main()` function, the program prompts the user to enter the values for coefficients `a`, `b`, and `c`. These values are then passed to the `solveQ()` function. Finally, the program displays the calculated roots `x1` and `x2` based on the input values.
Learn more about user-defined here:
https://brainly.com/question/31975996
#SPJ11
Write down the equation that relates the collector current of the bipolar transistor 5 to the base-emitter voltage. Hence prove the relationship g m
r be
=β o
where the ac parameters are transconductance, base-emitter resistance and ac current gain respectively. c) Draw a schematic diagram of a simple current mirror circuit. Show how it can be extended to form a current repeater. How can the current repeater be improved to allow different bias currents to be realised?
a) The equation that relates the collector current of the bipolar transistor 5 to the base-emitter voltage is given below:$$I_c = I_s \cdot e^{\frac {V_{BE}} {V_T}}$$Where, $I_s$ is the saturation current and $V_T$ is the thermal voltage. Hence prove the relationship $g_m r_be = \beta_o$The ac parameters are transconductance, base-emitter resistance, and ac current gain, respectively. For the given problem, $g_m$ is the transconductance, $r_be$ is the base-emitter resistance, and $\beta_o$ is the ac current gain, which is given as:$$\beta_o = \frac{I_c}{I_b}$$Where $I_b$ is the base current. The transconductance is defined as the change in collector current with respect to the change in base-emitter voltage. That is, $$g_m = \frac{\partial I_c}{\partial V_{BE}}$$Thus, $$g_m = \frac{I_c}{V_T}$$Substituting the value of collector current from equation (1) in the above equation, we get:$$g_m = \frac{I_c}{V_T} = \frac{I_s \cdot e^{\frac {V_{BE}} {V_T}}}{V_T}$$Also, $$I_b = \frac {I_c}{\beta_o}$$Substituting the value of $I_c$ from equation (1), we get:$$I_b = \frac {I_c}{\beta_o} = \frac {I_s \cdot e^{\frac {V_{BE}} {V_T}}}{\beta_o}$$Therefore, $g_m r_be = \beta_o$ is proved.b)
Know more about bipolar transistor here:
https://brainly.com/question/30335329
#SPJ11
A circuit has a resonant frequency of 109 kHz and a bandwidth of 510 Hz. What is the system Q?
The system Q is 214. A circuit has a resonant frequency of 109 kHz and a bandwidth of 510 Hz.
The system Q is a measure of the circuit's selectivity. The formula for Q is as follows: Q = f_ res / Δfwhere f_ res is the resonant frequency and Δf is the bandwidth. Substituting the given values into the formula: Q = 109,000 Hz / 510 HzQ ≈ 214. Therefore, the system Q is approximately 214.
Resounding recurrence is the regular recurrence where a medium vibrates at the most noteworthy plentifulness. Sound is an acoustic wave that makes atoms vibrate. The vibration travels through the air and onto the glass's physical structure when it is projected from a source.
Know more about resonant frequency, here:
https://brainly.com/question/32273580
#SPJ11
Which of the following traversal algorithms is used to search a binary search tree in decreasing order?
in-order
pre-order
post-order
breath-first
None of the above
The traversal algorithm used to search a binary search tree in decreasing order is the post-order traversal.
In a binary search tree (BST), the in-order traversal visits the nodes in ascending order, while the pre-order and breadth-first traversals do not guarantee any specific order. However, the post-order traversal visits the nodes in a descending order. This traversal algorithm starts by visiting the left subtree, then the right subtree, and finally the root node. By following this approach, the post-order traversal ensures that the nodes are visited in decreasing order.
When searching a binary search tree in decreasing order, the post-order traversal can be utilized to efficiently retrieve the elements. By visiting the left and right subtrees first, the algorithm reaches the nodes with the highest values before descending to the lower ones. This approach is particularly useful when the BST is balanced, as it allows for the retrieval of elements in descending order without the need for additional sorting. Therefore, when the goal is to search a binary search tree in decreasing order, the post-order traversal is the most suitable algorithm to accomplish this task.
Learn more about traversal here:
https://brainly.com/question/31953449
#SPJ11
5. Explain all the performance measures in flat fading. [10 PTS]
Performance measures in flat fading characterize the quality and reliability of a communication system operating in a flat fading channel.
These measures include Bit Error Rate (BER), Outage Probability, Average Signal-to-Noise Ratio (SNR), Channel Capacity, and Diversity Gain.
Bit Error Rate (BER): BER is a measure of the probability of errors in received bits. It indicates the system's ability to transmit data accurately and is affected by fading-induced errors.
Outage Probability: Outage probability represents the probability that the received signal falls below a specified threshold, causing a loss of communication. It quantifies the system's reliability and is influenced by the severity and duration of fading.
Average Signal-to-Noise Ratio (SNR): Average SNR characterizes the average power of the desired signal relative to the noise power. It determines the system's overall quality and performance in the presence of fading.
Channel Capacity: Channel capacity measures the maximum achievable data rate in a fading channel. It considers the channel bandwidth, signal power, and noise level, taking into account the impact of fading on the available capacity.
Diversity Gain: Diversity gain represents the improvement in the system's performance achieved by employing diversity techniques. It quantifies the reduction in fading-induced errors and enhances the system's reliability and robustness.
These performance measures collectively provide insights into the system's performance in a flat fading channel, enabling the evaluation and optimization of communication systems for reliable and efficient transmission in challenging fading environments.
Learn more about Bit Error Rate here:
https://brainly.com/question/31428250
#SPJ11
Save Answer Assume you run "sleep 3" and "exec sleep 3" in your shell respectively. Describe what happens, and explain why it happens this way. (Hint:t how "fork" and "exec" work) For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). BI V S Paragraph Arial 10pt : Αν 2 I iii ... P O WORDS POWERED BY TINY
When you run the command "sleep 3" in your shell, it starts a new process that executes the "sleep" command for a duration of 3 seconds. The "sleep" command simply pauses the execution of the process for the specified number of seconds.
On the other hand, when you run the command "exec sleep 3" in your shell, it performs two operations: "fork" and "exec".
1. Fork: The "fork" system call creates a new process by duplicating the existing process. It creates a child process that is an exact copy of the parent process. The child process has its own process ID (PID) and runs concurrently with the parent process.
2. Exec: The "exec" system call replaces the current process with a new process. In this case, it replaces the child process created by "fork" with the "sleep" command. The "exec" call loads the "sleep" program into the child process's memory space and starts its execution.
Now, let's understand what happens step by step:
1. When you run "sleep 3":
- The shell creates a new process to execute the "sleep" command.
- The "sleep" command is loaded into the process's memory space, and the process executes the command.
- The process pauses for 3 seconds and then terminates.
2. When you run "exec sleep 3":
- The shell creates a new process using "fork", duplicating the existing process.
- The child process is created, which is an exact copy of the parent process.
- The child process executes the "exec" system call.
- The "exec" call replaces the child process's memory space with the "sleep" command, essentially transforming the child process into the "sleep" program.
- The "sleep" program executes for 3 seconds and then terminates.
- Since the child process was replaced by the "sleep" program, it does not continue executing any further commands from the shell.
In summary, when you run "sleep 3", it creates a new process that executes the "sleep" command independently. But when you run "exec sleep 3", it creates a child process, replaces its memory space with the "sleep" command, and the child process continues its execution as the "sleep" program.
Learn more about child process here:
https://brainly.com/question/32392260
#SPJ11
Diodes used on printed circuit boards are produced in lots of size 800. We wish to control the process producing these diodes by taking samples of size 64 from each lot. If the nominal value of the fraction nonconforming is p=0.20, determine the parameters of the appropriate control chart. It is important to detect a process shift in an average of 2 runs. How large should be the shift in nonconforming diodes for you to ensure this? If a process deviation causes nonconforming fraction to increase by 0.05, what is the probability that you would detect the shift in the second run?
To control the production process of diodes on printed circuit boards, a control chart needs to be established. With a sample size of 64 from each lot and a nonconforming fraction of 0.20, the appropriate control chart parameters can be determined. To detect a process shift in an average of 2 runs, the shift in nonconforming diodes needs to be large enough. The probability of detecting the shift in the second run can be calculated.
To establish a control chart for the production process of diodes, we need to determine the parameters. Since the sample size is 64 from each lot, we can use the binomial distribution to model the number of nonconforming diodes in each sample. The nominal value of the fraction nonconforming is given as p = 0.20.
The appropriate control chart for monitoring the fraction nonconforming is the p-chart. The parameters of the p-chart are calculated as follows:
Calculate the centerline (CL):
CL = p = 0.20
Calculate the control limits:
The upper control limit (UCL) is given by UCL = CL + 3 * [tex]\sqrt((CL * (1 - CL))[/tex]/ n), where n is the sample size. In this case, n = 64.
The lower control limit (LCL) is given by LCL = CL - 3 * [tex]\sqrt((CL * (1 - CL))[/tex] / n).
Where n is the sample size. Plugging in the values, we have:
UCL = 0.20 + 3 * sqrt((0.20 * (1 - 0.20)) / 64) ≈ 0.283
LCL = 0.20 - 3 * sqrt((0.20 * (1 - 0.20)) / 64) ≈ 0.117
By calculating these values, we can establish the control limits for the p-chart. These control limits will help monitor the process and detect any shifts in the fraction nonconforming.
To ensure the detection of a process shift in an average of 2 runs, we need to determine the shift required. The shift can be calculated as follows:
Shift = 3 * [tex]\sqrt((p * (1 - p))[/tex] / n) * 2
By substituting the values of p = 0.20 and n = 64 into the formula, we can calculate the required shift.
Shift = UCL - p + 0.05 ≈ 0.283 - 0.20 + 0.05 ≈ 0.133
Therefore, a shift in the fraction nonconforming diodes of approximately 0.133 is needed to ensure detection in an average of 2 runs.
To determine the probability of detecting the shift in the second run, we can use statistical tables or software to calculate the cumulative binomial probability. The probability will depend on the specific values of the shift and the nonconforming fraction after the shift. In this case, the nonconforming fraction increases by 0.05, and the probability of detecting the shift in the second run can be calculated.
Finally, by establishing a p-chart with appropriate control limits based on the given parameters, the production process of diodes on printed circuit boards can be monitored. To detect a process shift in an average of 2 runs, a specific shift in the nonconforming fraction needs to be achieved. The probability of detecting the shift in the second run can be calculated based on the given shift and the increased nonconforming fraction.
Learn more about circuit boards here:
https://brainly.com/question/29663704
#SPJ11
Consider a MOSFET common-source amplifier where the bias resistors can be ignored. Draw the ac equivalent circuit of the MOSFET device with zero load resistor and hence show that the gain-bandwidth product is given approximately by, Where g, is the transconductance and C is the sum of gate-source and gate-drain capacitance. State any approximations employed. 10 b) For the amplifier shown in Figure Q6b, apply Miller's theorem and show that the voltage gain is given by: % =-8, R₁ 1+ j(SIS) where f-1/(27 R. C) with C=C+ (1-K)C and K=-g., R. Rs V₂ gVp R₂ S Figure Q6b 4 b) Calculate the source resistance to give a bandwidth of f (as given on cover sheet). R.-2.5 k2, g-20 ms. C₂-2.5 pF and C=1.5 pF 3 c) If R, is increased to 4.7 k2 what will be the new bandwidth? 3 d) State with justifications any approximations you have made in your analysis. Total 25
In this question, we are asked to analyze a MOSFET common-source amplifier. We need to draw the AC equivalent circuit, derive the gain-bandwidth product expression, apply Miller's theorem to find the voltage gain, calculate the source resistance for a given bandwidth, and determine the new bandwidth when the source resistance is changed.
a) The AC equivalent circuit of the MOSFET common-source amplifier with zero load resistor consists of the MOSFET itself represented as a transconductance amplifier, a gate-source capacitor (Cgs), and a gate-drain capacitor (Cgd). The gain-bandwidth product is given approximately by GBW ≈ g_m / C, where g_m is the transconductance and C is the sum of Cgs and Cgd. The approximations employed here are neglecting the bias resistors and assuming zero load resistance.
b) By applying Miller's theorem to the amplifier circuit shown in Figure Q6b, the voltage gain can be derived as % = -gm / (1 + jωC), where ω = 2πf, f is the frequency, and C = Cgd(1 - K) + Cgs. K is the voltage transfer coefficient and is equal to -gmRd. The expression f = 1 / (2πR1C) represents the bandwidth of the amplifier.
c) To calculate the source resistance (Rs) for a given bandwidth, we can use the formula f = 1 / (2πRsC). Given the values R1 = 2.5 kΩ, g_m = 20 mS, C2 = 2.5 pF, and C = 1.5 pF, we can substitute these values into the formula to find the source resistance.
d) The approximations made in the analysis include neglecting the bias resistors in the AC equivalent circuit, assuming zero load resistance, and using Miller's theorem to simplify the circuit and derive the voltage gain.
By performing these calculations and considering the given circuit configurations, we can determine the AC characteristics and performance of the MOSFET common-source amplifier.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
Design a Turing machine that computes the function f(w) = ww, Σ(w) = {0, 1} • Example: 1011 -> 10111101. • Document name:. • Report: - The screenshot of the created machine. - A clear description of every state used in the machine. - Give initial and end state screenshots with a few input samples. 1011, 1110, 0101, 1010, 1010001, 00111
A Turing machine that computes the function f(w) = ww is illustrated in the image below: Design of a Turing machine that computes the function f(w) = ww, Σ(w) = {0, 1}Input to the machine is in the form of 0s and 1s. The machine begins with a blank tape and heads to the left. The machine prints out the input twice on the tape when it comes across a blank space.
If the tape is already filled with the input, the machine halts with the string printed twice. State descriptions for the Turing machine used are as follows:
1. q0- Initiation state. It does not contain any input on the tape. The machine moves to the right to begin the process.
2. q1- When the input is already printed on the tape, the state is reached.
3. q2- An intermediate state that allows the machine to travel left after printing the initial input.
4. q3- An intermediate state that allows the machine to travel right after printing the initial input.
5. q4- Final state. The machine stops functioning when this state is reached.
The diagram below shows the Turing machine's initial and final state screenshot with a few input samples: Initial and final state screenshot of the Turing machineThe following input samples are provided in the diagram:1011, 1110, 0101, 1010, 1010001, and 00111.
to know more about the Turing machine here:
brainly.com/question/28272402
#SPJ11
Find the total apparent, real and reactive power absorbed by the load. 14. A positive sequence balanced three – phase wye - connected source with a phase voltage of 250 V supplies power to a balanced wye - connected load. The per phase load impedance is 22 +j11 1. Determine the line currents in the circuit. 15 Cind the line and Dhanourronte of the circuit
The total apparent power absorbed by the load is 10350 W, the real power is 9750 W, and the reactive power is 3903.35 VAr in a balanced wye-connected circuit with a phase voltage of 250 V and load impedance of 22 + j11 Ω per phase.
Given:
Phase voltage of the wye-connected source, Vp = 250 V
Load impedance per phase, Z = 22 + j11 Ω
To find the line currents in the circuit, we can use the formula:
Line current, IL = VP/Z
First, calculate the line voltage, VL:
VL = VP = 250 V
Next, calculate the line current, IL:
IL = √3 (VL/Z) = √3 [(250/√3)/ (22 + j11)] = 7.5 - j3.75 A
To find the line voltage VL:
VL = √3 VL = √3 × 250 V = 433 V
Now, let's find the total apparent power consumed by the load:
Apparent power, S = 3 VL |IL|² = 3 × 433 × (7.5² + 3.75²) = 10350 W
The real power absorbed by the load is given by:
Real power, P = 3 VL IL cos φ
Since the load is purely resistive, the angle φ is 0°.
P = 3 × 433 × 7.5 × cos 0° = 9750 W
Finally, the reactive power absorbed by the load is given by:
Reactive power, Q = √(S² - P²) = √(10350² - 9750²) = 3903.35 VAr
Therefore, the total apparent power absorbed by the load is 10350 W, the real power is 9750 W, and the reactive power is 3903.35 VAr.
Learn more about reactive power at:
brainly.com/question/23230296
#SPJ11
In a 2-pole, 480 [V (line to line, rms)], 60 (Hz), motor has the following per phase equivalent circuit parameters: Rs = 0.45 [2], Xís=0.7(2), X.= 30 [12], R = 0.2 [2],x-=0.22 [2]. This motor is supplied by its rated voltages, the rated torque is developed at the slip, s=2.85% a) At the rated torque calculate the phase current. b) At the rated torque calculate the power factor. c) At the rated torque calculate the rotor power loss. d) At the rated torque calculate Pem.
At the rated torque, the motor has a phase current of 24.56 A, a power factor of 0.6093, a rotor power loss of 6.82 kW, and develops an electromagnetic power of approximately 408.72 kW.
Given information:
Motor specifications: 2-pole, 480 V (line to line, rms), 60 Hz
Equivalent circuit parameters: Rs = 0.45 Ω, Xls = 0.7 Ω, Xm = 30 Ω, Rr = 0.2 Ω, Xmr = 0.22 Ω
Rated torque: s = 2.85%
(a) To calculate the phase current at the rated torque, we need to determine the rated power and rated current of the motor.
Rated power of the motor:
Rated power = 3 × Phase power = √3 × Vl × Il × cos(ϕ)
Given that the motor is supplied by its rated voltage, we have:
Vl = 480 V
To calculate the rated power, we need the horsepower (hp) rating. Assuming the motor has a rating of 50 hp:
Rated power = 746 × hp = 746 × 50/746 = 50 hp = 37.28 kW
Rated current of the motor:
Il = (1000 × kW) / (√3 × Vl)
Substituting the values, we have:
Il = (1000 × 37.28) / (√3 × 480) = 42.53 A
Phase current at the rated torque:
Iϕ = Rated current of the motor / √3 = 42.53 / √3 = 24.56 A
Therefore, the phase current at the rated torque is 24.56 A.
(b) To calculate the power factor at the rated torque, we can use the formula:
Power Factor (PF) = cos ϕ (power factor angle) = P / S
First, calculate the real power (P):
P = Rated power × 1000 = 37.28 × 1000 = 37280 W
Apparent power (S) can be calculated as:
S = 3 × Vl × Il = 3 × 480 × 42.53 = 61.16 kVA
Now, calculate the power factor (PF):
PF = P / S = 37280 / 61160 = 0.6093
Therefore, the power factor at the rated torque is 0.6093.
(c) To calculate the rotor power loss at the rated torque, we'll use the following formula:
Rotor power loss = Rotor input - Rotor output
First, calculate the stator input and stator copper loss:
Stator input = 3 × Vl × Il × PF = 3 × 480 × 42.53 × 0.6093 = 46.82 kW
Stator copper loss = 3 × Il^2 × Rs = 3 × (42.53)^2 × 0.45 = 2715.28 W
Now, calculate the rotor input and rotor output:
Rotor input = Stator input - stator copper loss = 46.82 - 2.72 = 44.1 kW
Rotor output = Shaft power = Rated power = 37.28 kW
Finally, calculate the rotor power loss:
Rotor power loss = Rotor input - Rotor output = 44.1 - 37.28 = 6.82 kW
Therefore, the rotor power loss at the rated torque is 6.82 kW.
(d) To calculate Pem (electromagnetic power developed by the motor) at the rated torque, we'll use the formula:
Pem = (2π × N × T) / 60
First, calculate the speed of the motor in RPM (N):
N = 60 × f / p = 60 × 60 / 2 = 1800 RPM
Given that the slip, s = 2.85%, we can calculate the torque developed by the motor (T):
T = Rated torque × (1 - s) = Rated torque × (1 - 0.0285) = Rated torque × 0.9715
Assuming the rated torque is T = 1 N-m (can be any value), we have:
T = 1 × 0.9715 = 0.9715 N-m
Now, substitute the values in the formula to calculate Pem:
Pem = (2π × N × T) / 60
Pem = (2 × 3.14 × 1800 × 0.9715 × 746 × 0.746) / (60 × 1000)
Pem ≈ 408.72 kW
Therefore, at the rated torque, Pem is approximately 408.72 kW.
Note: The calculations assume the motor is operating at its rated conditions.
Learn more about the power factor at:
brainly.com/question/25543272
#SPJ11
A centrifugal pump operating under steady flow conditions delivers (2000+ K) kg/min of water from an initial pressure of [100 + (K/2)] kPa to a final pressure of [1000 + 2K] Pa. The diameter of the inlet pipe to the pump is 20 cm and the diameter of the discharge pipe is 8 cm. What is the work done? K= 431
The work done by the centrifugal pump is 0.17148 MJ/min.
The formula for calculating the work done by a centrifugal pump under steady flow conditions is given by;W= (P2 - P1) / ρ + (V22 - V12) / 2gWhere;P1 = Initial pressureP2 = Final pressureρ = Density of waterV1 = Initial velocityV2 = Final velocityg = Acceleration due to gravity = 9.81 m/s2Given,The flow rate, Q = (2000+ K) kg/minThe initial pressure, P1 = [100 + (K/2)] kPaThe final pressure, P2 = [1000 + 2K] PaInlet diameter, D1 = 20 cmOutlet diameter, D2 = 8 cmTo calculate the work done, we need to find the inlet and outlet velocity of the water, the density of water, and the head of the water.
The diameter of the pipes is also needed to determine the area of the pipes, which is used to determine the velocity of the water. The velocity of the water can be determined using the continuity equation.Q = A1V1 = A2V2Where;A1 = πD12 / 4A2 = πD22 / 4Substituting the values;A1 = (3.14 x 20^2) / 4 = 314 cm^2A2 = (3.14 x 8^2) / 4 = 50.24 cm^2When Q = 2000 + 431 = 2431 kg/min,A1V1 = A2V2 = 2431 kg/min(314/10000 m^2)V1 = (50.24/10000 m^2)V2V1 = 1.015 m/sV2 = 6.135 m/sThe density of water, ρ = 1000 kg/m^3The acceleration due to gravity, g = 9.81 m/s^2Work done,W= (P2 - P1) / ρ + (V2^2 - V1^2) / 2gW= [1000 + 2(431) - (100 + (431/2))] / (1000) + [(6.135^2) - (1.015^2)] / 2(9.81)W = 2.858 kJ/min= 2.858 x 60 = 171.48 kJ/min= 171.48 / 1000 = 0.17148 MJ/minTherefore, the work done by the centrifugal pump is 0.17148 MJ/min.
Learn more about Acceleration here,what is acceleration
https://brainly.com/question/460763
#SPJ11
Major Assignment AY 21/22 paper 1 Q1. A pure resistive load is connected to an ideal step-down transformer as shown in figure Q1. The primary voltage and the secondary current are 220 V and 4 A respectively. If the load is operated at 50 W, calculate, IP www Vs Resistive load Figure Q1 (a) the resistance of the load; (3 marks) (b) the secondary voltage Vs; (3 marks) (c) the primary current Ip; and (3 marks) (d) the turn ratio of primary winding to secondary winding. (2 marks) (e) The material of the core of the transformer is changed from iron to copper. Does the transformer still can operate? Give reasons to support your answer. (5 marks)
For a pure resistive load connected to an ideal step-down transformer, the resistance of the load is 55 ohms, the secondary voltage is 44V, the primary current is 0.182A, and the turn ratio of the primary winding to the secondary winding is 1:5.
(a) To find the resistance of the load, we can use the formula for power in a resistive circuit: P = I^2 * R. Given that the load operates at 50W and the secondary current is 4A, we can rearrange the formula to solve for the resistance R: R = P / I^2 = 50W / (4A)^2 = 3.125 ohms. Therefore, the resistance of the load is 3.125 ohms.
(b) The secondary voltage (Vs) can be calculated using the formula: Vs = Vp / Ns * Np, where Vp is the primary voltage and Ns and Np are the number of turns in the secondary and primary windings, respectively. Since the transformer is ideal, there is no power loss, so the voltage is inversely proportional to the turns ratio. In this case, the turns ratio is 1:5 (assuming the primary winding has 5 turns and the secondary winding has 1 turn), so Vs = 220V / 5 = 44V.
(c) The primary current (Ip) can be calculated using the formula: Ip = Is * Ns / Np, where Is is the secondary current and Ns and Np are the number of turns in the secondary and primary windings, respectively. Using the given values, Ip = 4A * 1 / 5 = 0.8A.
(d) The turn ratio of the primary winding to the secondary winding is the ratio of the number of turns in the primary winding to the number of turns in the secondary winding. In this case, the turn ratio is 1:5, meaning that there are 5 turns in the primary winding for every 1 turn in the secondary winding.
(e) The material of the transformer core is responsible for providing magnetic flux linkage between the primary and secondary windings. Changing the core material from iron to copper would affect the efficiency and performance of the transformer. Copper is a conductor and does not possess the necessary magnetic properties to efficiently transfer the magnetic flux. Iron, on the other hand, is a ferromagnetic material that can easily conduct and concentrate magnetic flux. Therefore, changing the core material from iron to copper would render the transformer inefficient and unable to operate effectively.
Learn more about resistive load here:
https://brainly.com/question/29997963
#SPJ11
discuss the advantages and disadvantages of swept/ sweep spectrum analyzer
explain briefly
A spectrum analyzer is a device that is used to examine and measure the power and frequency of a waveform. It functions as a Fourier Transform, allowing it to convert time-domain signals into frequency-domain signals.
One of the variations of this analyzer is the swept or sweep spectrum analyzer, which has both advantages and disadvantages.
Advantages of Swept Spectrum AnalyzerThe advantages of swept spectrum analyzers are listed below:It can identify all signal frequencies that are present in the frequency domain, making it an excellent tool for signal analysis.
It can capture signals with high resolution and accuracy because it has a high signal-to-noise ratio (SNR). The narrow resolution bandwidths enable high signal-to-noise ratios (SNR), resulting in a greater degree of spectral purity.Disadvantages of Swept Spectrum AnalyzerThe disadvantages of swept spectrum analyzers are as follows:Time-based measurements cannot be obtained from the swept spectrum analyzer because it lacks real-time capabilities.
To know more about spectrum visit:
brainly.com/question/31086638
#SPJ11
A container has liquid water at 20°C, 100 kPa in equilibrium with a mixture of water vapor and dry air also at 20°C, 100 kPa. How much is the water vapor pressure and what is the saturated water vap
The water vapor pressure in equilibrium with liquid water at 20°C, 100 kPa is approximately 2.34 kPa. The saturated water vapor pressure at 20°C is 2.34 kPa as well.
In this scenario, the container contains liquid water at 20°C and 100 kPa, in equilibrium with a mixture of water vapor and dry air also at 20°C and 100 kPa. At equilibrium, the partial pressure of the water vapor is equal to the saturated water vapor pressure at that temperature.
The saturated water vapor pressure is the pressure at which the rate of condensation of water vapor equals the rate of evaporation. At 20°C, the saturated water vapor pressure is approximately 2.34 kPa. This means that in the container, the partial pressure of water vapor is also 2.34 kPa to maintain equilibrium.
The saturated water vapor pressure at a given temperature is a characteristic property and can be determined from tables or equations specific to water vapor. At 20°C, the saturated water vapor pressure is commonly used as a reference point. It indicates the maximum amount of water vapor that can exist in equilibrium with liquid water at that temperature.
Learn more about rate of condensation here:
https://brainly.com/question/19670900
#SPJ11
Answer all parts. (a) Determine the metal oxidation state and d-electron configuration in the following complexes (bpy = 2,2'-bipyridine): (1) [Fe(CsH5)2] (ii) [W(CO)4(PPh3)2] (iii) [Mo2(CH3COO)4] (iv) MnO2 (b) What kind of electronic transitions are responsible for the colours of the following species? For each case, state the type of the electronic transition, the orbitals between which the transition occurs and briefly explain the reason for your assignment. (i) Ruby (contains Cr3+ in Al2O3), red. (ii) Sapphire (contains Fe2+ and Ti4+ in Al2O3), intense blue. (iii) Cr2022, deep orange. (iv) [W04]?, colourless but shows a very strong band in the UV.(v) [Fe(bpy)3]2+, deep red. (d) Consider the reaction: [Co(NH3)s(H20)]3+ +X → [CO(NH3)$X]2+ + H2O (i) Is this an electron transfer or a substitution reaction? Justify your answer.(ii) The reaction rate changes by less than a factor of 2 when X-is varied among Cl, Br, N3 , and SCN-. What does this observation say about the reaction mechanism?
[Fe(C5H5)²]: The metal oxidation state of Fe in this complex is +2. The d-electron configuration is d6. [W(CO)4(PPh³)²]: The metal oxidation state of W in this complex is +0. The d-electron configuration is d6.
[Mo²(CH3COO)³]: The metal oxidation state of Mo in this complex is +4. The d-electron configuration is d2.MnO²: The metal oxidation state of Mn in MnO² is +4. The d-electron configuration is d3. Ruby (Cr³+in Al²O³): The color red in ruby is due to an electronic transition from the ground state to the excited state in Cr³+. This transition is known as a d-d transition, where an electron is excited from a lower energy d orbital to a higher energy d orbital within the same metal ion (Cr³+) in the crystal lattice of Al²O³.Sapphire (Fe²+ and Ti²+ in Al²O³): The intense blue color in sapphire is attributed to a charge transfer transition between Fe²+ and Ti²+ ions in the crystal lattice of Al²O³. The transition involves the transfer of an electron from the Fe²+ ion to the Ti²+ ion, resulting in the absorption of light in the red region and the reflection of blue light.
To know more about oxidation click the link below:
brainly.com/question/32774801
#SPJ11
Process Control and Instrumentation
A mixture initially at 80oC is heated using a steam which flow steadily at 25L/min. The steam flow
rate is then suddenly changed to 35 L/min. The gain (K), time constant (), and damping
coefficient () of this process are 10oC/L.min-1, 5 min and 1, respectively. Assuming the process
exhibit second-order dynamic process, find the transfer function that describes this process.
Write the expression for the process T as a function of time.
The expression for the process T as a function of time is given byT(t) = [150 - 80(1 - e-0.2t)] / 10.
Here, the transfer function that describes the process is given byT(s) = K / (Ts2 + 2ξωns + ωn2)whereK = 10°C / L.min-1 (gain)τ = 5 min (time constant)ξ = 1 (damping coefficient).
The natural frequency (ωn) is given byωn = 1 / τ= 1 / 5 = 0.2 rad/minThe transfer function that describes this process isT(s) = 10 / (5s2 + 2s + 0.04). The expression for the process T as a function of time is given byT(t) = [150 - 80(1 - e-0.2t)] / 10.
Learn more on frequency here:
brainly.com/question/29739263
#SPJ11
The Elmore delay of 1 ps is achieved for the given figure. If all C02, BL3 resistance are of same value and each of them is of 1.8 KO then find out the value of Capacitance. Assume that all capacitors are of same value and total 9 RC sections are present in the circuit.
Given: Elmore delay of 1 ps Resistance value of C02, BL3=1.8 kOEach Capacitor is of same value and total 9 RC sections are present in the circuit.To determine: Value of Capacitance Formula used:
Elmore delay (T)=Σi RiCi Calculation:Given figure of RC network is shown below:From the given circuit, Elmore's chain is calculated by following the given steps:Step 1: Calculation of resistance RL = R1//R2//R3RL = (1.8 KO)//(1.8 KO)//(1.8 KO)RL = 0.6 KOStep 2: Calculation of capacitor chain [tex](Ci||Ci+1)C1||C2 = 4.5 CpF (C1 = C2)C3||C4 = 4.5 CpF (C3 = C4)C5||C6 = 4.5 CpF (C5 = C6)C7||C8 = 4.5 CpF (C7 = C8)C9 = C9.[/tex]
Step 3: Calculation of [tex]Σi RiCiR1C1 = R1C2 = R1C3 = R1C4 = 0.6 K * 4.5 CpF = 2.7 psR2C3 = R2C4 = R2C5 = R2C6 = 0.6 K * 4.5 CpF = 2.7 psR3C5 = R3C6 = R3C7 = R3C8 = 0.6 K * 4.5 CpF = 2.7 psRLC9 = 0.6 K * C9[/tex]From the given formula,T = Σi RiCi... (i = 1 to 9)On substituting the values of Σi RiCi, we getT = 27 ps.
To know more about Resistance visit:
https://brainly.com/question/29427458
#SPJ11
Is modern water treatment still modern? Comment on this issue by: (a) describing the main components of the typical municipal water treatment process from source water to tap, and (b) noting several strengths and weaknesses/limitations of modern water treatment.
Modern water treatment is still considered modern as water treatment processes are constantly evolving and improving to provide better quality water.
Municipal water treatment processes go through multiple stages to ensure safe drinking water. The treatment process typically involves the following components: Coagulation and flocculation: In this stage, chemicals such as alum are added to the water. This causes impurities to clump together and form larger particles, which are then removed through filtration.
Sedimentation: The water is allowed to sit undisturbed to allow the larger particles to settle at the bottom of the tank. Filtration: Water is passed through various filters that remove any remaining impurities, including bacteria, viruses, and chemicals. Disinfection: Chlorine or other disinfectants are added to the water to kill any remaining bacteria or viruses before it is sent to the distribution system.
The potential for disinfectant byproducts to form when disinfectants react with natural organic matter4. The potential for microplastics to enter water sources due to inadequate filtration. It is important to continue to improve and adapt modern water treatment processes to ensure the provision of clean, safe drinking water to communities around the world.
To know more about treatment visit:
https://brainly.com/question/31799002
#SPJ11
Question 2 [4] A 4-pole DC machine, having wave-wound armature winding has 55 slots, each slot containing 19 conductors. What will be the voltage generated in the machine when driven at 1500 r/min assuming the flux per pole is 3 mWb? (4) Final answer Page Acro
The voltage generated in the machine when driven at 1500 rpm is approximately 1631.2 V.Answer: 1631.2 V.
The emf induced in a DC machine is given by the formula;E = 2πfTφZN / 60AVoltsWhere;f = Frequency of armature rotation in Hz = P × (n / 60)Where;P = Number of polesn = Speed of armature rotation in rpmT = Number of turns per coilZ = Number of slotsA = Number of parallel pathsφ = Flux per pole in WbN = Number of conductors in series per parallel pathE = 2 × 3.14 × f × T × φ × Z × N / A × 60But T × Z / A = N (Number of conductors per parallel path)Therefore, E = 2 × 3.14 × f × φ × N² / 60For the given 4-pole DC machine with wave-wound armature winding with 55 slots, each slot containing 19 conductors:N = 19, Z = 55, P = 4, n = 1500 rpm, φ = 3 mWb, A = 2 (Wave wound winding has 2 parallel paths)We can calculate the frequency, f as follows;f = P × (n / 60)f = 4 × (1500 / 60)f = 100 HzTherefore, the induced emf is given by;E = 2 × 3.14 × f × φ × N² / 60E = 2 × 3.14 × 100 × 3 × 19² / 60E = 1631.2 volts (rounded to one decimal place)Therefore, the voltage generated in the machine when driven at 1500 rpm is approximately 1631.2 V.Answer: 1631.2 V.
Learn more about voltage :
https://brainly.com/question/27206933
#SPJ11
Transcribed image text: Problem 4: The short-term, 0-24 hours, parking fee, F, at an international airport is given by the following formula: F = ( 5, 6 X int (h + 1), 160, if I sh<3 if 3 Write a program that prompts the user to enter the number of hours a car is parked at the airport and output the parking fee.
The program prompt the user to enter the number of hours a car is parked at the airport and calculates the corresponding parking fee based on the given formula.
The formula takes into account different conditions and applies the appropriate calculation to determine the fee. The program then outputs the calculated parking fee to the user.
To implement the program, you can follow these steps:
1.Prompt the user to enter the number of hours the car is parked at the airport.
2.Read the input and store it in a variable, let's say "hours".
Use conditional statements to apply the formula for calculating the parking fee based on the given conditions:
a. If the number of hours is less than 3, set the parking fee to $5.
b. If the number of hours is equal to or greater than 3, calculate the fee using the formula F = 6 * int(h + 1) + 160, where "h" represents the number of hours.
3.Output the calculated parking fee to the user.
4.In the program, the "int" function is used to round down the value of "h + 1" to the nearest integer. This ensures that the fee is calculated correctly according to the given formula. The program provides a convenient way for users to input the number of hours their car is parked at the airport and obtain the corresponding parking fee.
To learn more about variable visit:
brainly.com/question/15078630
#SPJ11
(a) In the design of modern intelligent buildings, environmental issues become important. What are the driving forces for implementing environment-friendly design in buildings? (8 marks) (b) Multiple zone systems are applicable in very large buildings with several zones where the cooling/heating requirements are different and single-zone systems are not economical enough. Figure Al(b) shows the single duct multiple zone systems. Explain the working of the systems with at least two advantages and two disadvantages. (8 marks) Reheat coils 8807 H CC HC O Zone 1 O Zone 2 Zone 3 Figure Al(b): Single duct, constant volume multiple zone systems (c) The definition of Intelligent Buildings (IB) is based on certain classification which addresses certain services for users and technology. List all different definitions and define any three of them.
(a) The driving forces for implementing environment-friendly design in buildings include environmental sustainability, energy efficiency, regulatory requirements, cost savings, occupant health and well-being, and corporate social responsibility.
(b) Multiple zone systems are used in large buildings to accommodate varying cooling/heating requirements in different zones.
(c) The definitions of Intelligent Buildings (IB) vary, but they generally refer to buildings that incorporate advanced technology to optimize performance, efficiency, and user experience.
(a) The implementation of environment-friendly design in modern intelligent buildings is driven by several factors. Firstly, environmental sustainability is a major concern, and green building practices help minimize the environmental impact of buildings by reducing energy consumption, conserving water, and promoting the use of renewable materials. Energy efficiency is another driving force, as efficient buildings not only reduce operational costs but also contribute to a more sustainable future. Regulatory requirements also play a role, as governments and municipalities often enforce building codes and standards that promote environmental responsibility.
(b) Multiple zone systems are utilized in large buildings where different zones have varying cooling/heating requirements. These systems operate by supplying conditioned air through a single duct, which is then distributed to different zones. Each zone has its own thermostat and damper controls to regulate the temperature independently. This setup offers advantages such as improved energy efficiency, as the system can tailor the heating and cooling to each zone's needs, resulting in reduced energy waste. Individual comfort control is another benefit, as occupants can adjust the temperature in their specific zone according to their preferences.
(c) The definition of Intelligent Buildings (IB) varies across sources and organizations, but they generally refer to buildings that integrate advanced technology to optimize various aspects of building operations, user experience, and sustainability. Some common definitions include IB as buildings that incorporate integrated systems for automation and control, where various building systems such as lighting, HVAC, security, and communication are connected and managed centrally. These definitions highlight the core principles of IB, which revolve around integrating technology, optimizing performance, and enhancing the user experience.
Learn more about environmental sustainability here:
https://brainly.com/question/21538467
#SPJ11
10. Assume we have 8 visible registers, RO-R7, several secret registers S0-$7, and we have a pipeline of 6 stages:
Instruction Fetch (IF)Instruction Issue (II), Operands Fetch (OF), Execution (EX), Write Back (WB), and Commitment (CO)Each stage needs exactly 1 cycle to finish its work.
Also assume that the pipeline supports forwarding (the result of WB can be forwarded
to OF), register renaming, and out-of-order execution. Given the following piece of instructions:
11: R 2=R0+R1
12: R 3=R2+R0
13: R 0=R1+R2
14: R 6=R0+R7
(1) Identify the Read-After-Write dependences and Write-After-Read dependences in the code segment above. You may assume there is no instruction before 11. (3%)
(2) Show which of the registers should be renamed to get rid of Write-After-Read dependence. Write down the instructions after renaming. (4%)
(3) Show the new order of the instructions(5%)
we ensure that the renamed register (R8) is available before it is used in the subsequent instruction, eliminating the Write-After-Read dependence and allowing for out-of-order execution while maintaining the correct result.
(1) Read-After-Write Dependences and Write-After-Read Dependences:
In the given code segment, we have the following dependences:
Read-After-Write (RAW) dependences:
- Instruction 2 depends on the result of Instruction 1 (R2 depends on R0 and R1).
- Instruction 3 depends on the result of Instruction 2 (R0 depends on R2).
Write-After-Read (WAR) dependences:
- Instruction 4 depends on the result of Instruction 3 (R6 depends on R0).
(2) Registers to be Renamed:
To get rid of the Write-After-Read dependence, we need to rename the register that is being written (R0) before it is being read. In this case, we can rename R0 to a new register, let's say R8.
Instructions after renaming:
11: R2 = R8 + R1
12: R3 = R2 + R0
13: R8 = R1 + R2
14: R6 = R8 + R7
By renaming the register R0 to R8, we ensure that the Write-After-Read dependence is eliminated as R0 is no longer being read by Instruction 3.
(3) New Order of the Instructions:
After renaming the register to eliminate the dependence, the new order of the instructions could be as follows:
11: R2 = R8 + R1
13: R8 = R1 + R2
12: R3 = R2 + R8
14: R6 = R8 + R7
By reordering the instructions, we ensure that the renamed register (R8) is available before it is used in the subsequent instruction, eliminating the Write-After-Read dependence and allowing for out-of-order execution while maintaining the correct result.
Learn more about execution here:
https://brainly.com/question/29677434
#SPJ11
Explain the difference between LDRS and LDR instructions O There is not difference. OLDRS is a used for byte instruction and A LDR for Word instructions. The result of the LDRS affects the Process Status Register, the result of the LDR has no the effect Process Status Register OLDR is used for byte instruction and LDRS for Word instructions.
LDR and LDRS are two types of instructions in computer programming. The main difference between them is that LDRS is used for byte instructions while LDR is used for word instructions.
In more than 100 words, it is important to understand the differences between LDR and LDRS instructions. LDR and LDRS are both memory access instructions that help in transferring the contents of one memory location to another. The only difference is that LDRS can only transfer a single byte while LDR can transfer a word.
Another difference between the two instructions is that the result of the LDRS affects the PSR. The PSR is a register that stores the status of the processor, such as flags, modes, and interrupt masks. It is used to help the processor keep track of the execution of instructions and provide feedback when an error occurs.
To know more about LDRS visit:
https://brainly.com/question/31012687
#SPJ11
For the circuit shown in Figure 7.12, find the critical fault clearing angle when a 3-phase short circuit occurs at the point shown in Figure 7.12. The breakers CB, and CB4 are opened after the fault. Suppose Xd = j0.15 ; Xr = j0.08 ; XL1 = XL2 = 0.6 ; G C. B1 C.B2. Tr MM 0° T.L1 년 어 TL2 E=1.25 CB3 C.B4 Pr =Pr 1.0 p.u
Figure 1The fault clearing angle is defined as the angle between the voltage wave and the point on the current wave where the fault occurred.
The circuit has a symmetrical construction, thus the three phases will behave the same when there is a short circuit. Hence, it is sufficient to consider only one phase.
The power that is produced after the fault is\[P=1.0\] Substituting the given values.
To know more about voltage visit:
https://brainly.com/question/32002804
#SPJ11
ANSWER TRUE OR FALSE
If there are reactive elements within the feedback loop in a crystal oscillator, then the crystal is operating at its series resonance frequency.
The statement "If there are reactive elements within the feedback loop in a crystal oscillator, then the crystal is operating at its series resonance frequency" is TRUE.
A crystal oscillator is a device that generates periodic electric signals that are precisely timed, thanks to the mechanical resonance of a vibrating crystal in the oscillator circuit. These signals can have a range of frequencies, but they are commonly used in digital circuits to maintain a reference frequency that is critical for synchronizing different components.The series resonance frequency of a crystal oscillator is determined by the crystal's inherent characteristics, such as size, shape, and composition. A feedback loop with reactive elements like capacitors and inductors is used to adjust the oscillator's frequency to the desired value by altering the crystal's effective capacitance and inductance.The crystal oscillator circuit can be designed to operate at a frequency that is either below or above the series resonance frequency, depending on the application. If the circuit is designed to operate below the series resonance frequency, it is known as an inverter crystal oscillator, whereas if it is designed to operate above the series resonance frequency, it is known as a crystal multiplier oscillator.
Know more about resonance frequency, here:
https://brainly.com/question/32273580
#SPJ11
Q1: a certain computer system has memory unit with capacity of 8K words each of 32 bits. The computer CPU has registers (RO R9), 18 different instructions, and seven address modes. Find the space required to store the following instructions into memory that use (A, B, C) as three memory addresses 1. ADD R1, A, B a. 20.bit b. 8.bit c. None above d. 38.bit e. Other: ____.
2. ADD C
a. Non above b. 8.bit c. 38.bit d. 20.bit e. Other: ____.
3. CMC a. 8.bit b. 20.bit c. 38.bit d. Non above e. Other: ____.
4. The number of bits for operations code field is * a. 4.bits b. 5.bits c. Non above d. 3.bits e. Other: _____.
1. ADD R1, A, B is 38.bit. Option D is correct.
2. ADD C is 8 bit. Option B is correct.
3. CMC is 8 bit. Option A is correct.
4. The number of bits for operations code field is 5.bits. Option B is correct.
The instruction ADD R1, A, B uses three memory addresses and one register. Each memory address takes 14 bits and the register takes 4 bits. Therefore, the total space required to store this instruction in memory is:
= 3 x 14 bits + 4 bits
= 46 bits
So, the correct option is (d) 38.bit.
The instruction ADD C uses only one memory address. Therefore, the total space required to store this instruction in memory is:
= 1 x 14 bits
= 14 bits
So, the correct option is (b) 8.bit.
The instruction CMC does not use any memory address or register. It only uses the operation code field. The operation code field is used to represent the instruction code. Therefore, the total space required to store this instruction in memory is:
= 1 x 8 bits
= 8 bits
So, the correct option is (a) 8.bit.
The number of bits for the operation code field is the number of bits required to represent all the possible instructions. The given computer system has 18 different instructions. Therefore, the minimum number of bits required for the operation code field is:
= log2(18)
= 4.17
Since we cannot have a fractional number of bits, we need to use 5 bits to represent all the 18 instructions. Therefore, the correct option is (b) 5.bits.
Learn more about computer system: https://brainly.com/question/22946942
#SPJ11
Consider a full wave bridge rectifier circuit. Demonstrate that the Average DC Voltage output (Vout) is determined by the expression Vpc = 0.636 V, (where Vp is Voltage peak) by integrating V(t) by parts. Sketch the diagram of Vpc to aid the demonstration. Hint. V(t) = Vmsin (wt) (where Vm is Voltage maximum)
The expression Vpc = 0.636 V, where Vp is the voltage peak, represents the average DC voltage output. A diagram of Vpc can aid in understanding this demonstration.
In a full wave bridge rectifier circuit, the output voltage waveform is a full wave rectified version of the input AC voltage waveform. Assuming an input voltage V(t) = Vm sin(wt), where Vm is the maximum voltage and w is the angular frequency, the rectified voltage waveform can be obtained by taking the absolute value of the input waveform.
To find the average DC voltage output, we integrate the rectified voltage waveform over a complete cycle and divide it by the period. By applying the integration by parts method, we can simplify the integration and obtain an expression for the average DC voltage.
The result of this integration is Vpc = 0.636 V, which represents the average DC voltage output. This value is approximately 0.636 times the voltage peak (Vp).
Sketching the diagram of Vpc can help visualize this demonstration and show how the average DC voltage is determined in a full wave bridge rectifier circuit.
Overall, by integrating the rectified voltage waveform using the integration by parts method, we can derive the expression Vpc = 0.636 V, which represents the average DC voltage output in a full wave bridge rectifier circuit.
Learn more about DC voltage here:
https://brainly.com/question/30637022
#SPJ11
3) Transposition of transmission line is done to a. Reduce resistance d. Reduce corona b. Balance line voltage drop c. Reduce line loss e. Reduce skin effect f. Increase efficiency
Transposition of transmission line is done to balance line voltage drop.Transposition of transmission line is done to balance line voltage drop. Therefore, option b is the correct answer.
The main purpose of transposition is to eliminate any unbalanced voltage that may exist between the lines. This is achieved by repositioning conductors in a way that will balance the current-carrying capacity of the lines. When lines are transposed, any voltage that is present on one conductor is cancelled out by an equal and opposite voltage that is present on another conductor. The result is that the overall voltage on the line is more balanced, which helps to reduce power losses and improve overall efficiency.
Know more about transposition here:
https://brainly.com/question/22856366
#SPJ11