allison jogged around lions park for one hour and according to her pedometer she covered 4.5 miles. if allison jogs at the same rate for 1 and a half hours how many miles will she jog?

Assuming that the policyholder is healthy and has an average life expectancy, we can estimate the expected value of the policy by multiplying the probability of dying during the policy period by the amount that will be paid out in the event of death.

The probability of dying during the policy period can be estimated using actuarial tables, which provide information on life expectancies based on age, gender, and other factors. For a healthy 28-year-old female, the probability of dying during a one-year policy period is very low, likely less than 0.1%.

If we assume a probability of dying of 0.1%, the expected value of the policy would be:

Expected value = 0.001 x $200,000 = $200

This means that, on average, the policyholder can expect to receive $200 in benefits from the policy. However, it's important to note that this is just an estimate and actual benefits may be higher or lower depending on the policyholder's individual circumstances.

The midpoint is M = 0.6 and the distance is D = 4.2

Given data ,

The distance between points D and E on the number line

D = 4.2

Now , the first point D = -1.8

And , the point E = 2.4

And , the distance D = 2.4 - 1.8 = 4.2 units

Thus, the midpoint between points D and E on the number line = 0.6

Hence, the distance and midpoint between points D and E on the number line 4.2 and 0.6

To learn more about midpoint of two points click :

https://brainly.com/question/29155265

#SPJ1

The complete question is attached below :

What is the distance and midpoint between points D and E on the number line?

Answer:

2 (x + 1)(x + 9)

Step-by-step explanation:

The given expression is
[tex]\left(2x^2\:+\:23x\right)\:-\:\left(3x\:-\:18\right)[/tex]

and we are asked to factor it

Step 1
Remove parentheses
[tex]\left(2x^2\:+\:23x\right) = 2x^2 + 23x\\\\-\:\left(3x\:-\:18\right) = - (3x) - (-18) = -3x + 18\\\\[/tex]

Step 2
Add the individual terms to correspond to the original expression:
[tex]\left(2x^2\:+\:23x\right)\:-\:\left(3x\:-\:18\right) \\\\= 2x^2 + 23x -3x + 18\\\\= 2x^2 + 20x + 18[/tex]

Step 3
Factor out common term 2

[tex]2x^2+20x+18 \\\\= 2\left(x^2+10x+9\right)[/tex]

Step 4
Factor [tex]x^2+10x+9[/tex]

To do this find two numbers such that their sum = 10 and product = 9
We can easily see that these two numbers are 1 and 9 because 1 + 9 = 10 and 1 x 9 = 9

Therefore, splitting the expression into groups we get
[tex]x^2 + 10x + 9 = x^2 + 1x + 9x + 9\\\\[/tex]

Step 5

Factor:

[tex]x^2 + 1x = x(x+ 1)\\9x + 9 = 9(x + 1)\\\\[/tex]

Therefore
[tex]x^2 + 1x + 9x + 9 = x(x + 1) + 9(x + 1)\\\\[/tex]

Step 6

Factor common term (x + 1) from the expression
[tex]x(x + 1) + 9(x + 1) = (x + 1)(x + 9)[/tex]

Step 7
Putting it all together
Remember we factored out the 2 in step 3 so we got to put it back into the factored expression giving the final factored expression as

[tex]2 (x + 1)(x + 9)[/tex]

To find the volume of the solid generated by revolving the region enclosed by the curves y = √(cos(x)), y = e^x and x = pi/2 around the x-axis, we can use the method of cylindrical shells.

Consider a thin vertical strip of width dx at a distance x from the y-axis. The height of this strip is the difference between the y-coordinates of the two curves:

h = e^x - √(cos(x))

The circumference of the shell is given by 2πx since the strip is at a distance x from the y-axis. Therefore, the volume of the shell is given by:

dV = 2πx * h * dx

= 2πx * (e^x - √(cos(x))) * dx

To find the total volume of the solid, we need to integrate this expression from x=0 to x=pi/2:

V = ∫[0, pi/2] 2πx * (e^x - √(cos(x))) dx

This integral can be evaluated using integration by substitution. Let u = cos(x), then du/dx = -sin(x) and dx = du/-sin(x). Using this substitution, the integral becomes:

V = ∫[1, 0] 2π * (-ln(u)/sin(x)) * (e^x - √(u)) dx

Integrating this expression with respect to x from x=0 to x=pi/2, we get:

V = 2π * [e^(pi/2) - 1 - (4/3) * (1 - sqrt(2))]

Therefore, the volume of the solid is approximately 27.838 cubic units (rounded to three decimal places).

a) The probability of selecting exactly 3 award-winners before selecting a SENIOR is  0.078875

b)The probability of selecting more than 2 award-winners before selecting a JUNIOR is 0.135437

c)The probability of selecting 2 or fewer award-winners before selecting a SOPHOMORE is 0.252744

Probability is a measure of the likelihood or chance of an event occurring. It is a numerical value between 0 and 1, where 0 indicates that the event is impossible, and 1 indicates that the event is certain to occur.

(a) The probability of selecting a SENIOR is 0.65, and the probability of not selecting a SENIOR is 0.35.

Since we are selecting award-winners until we select a SENIOR, the first two selections must not be SENIORS, and the third selection must be a SENIOR.

the probability of selecting exactly 3 award-winners before selecting a SENIOR is:

P(not SENIOR) x P(not SENIOR) x P(SENIOR) = 0.35 x 0.35 x 0.65 = 0.078875

(b)Therefore, the probability of selecting more than 2 award-winners before selecting a JUNIOR is:

P(not JUNIOR) x P(not JUNIOR) x P(JUNIOR) = 0.77 x 0.77 x 0.23 = 0.135437

To find the probability of selecting more than 2 award-winners, we can subtract this value from 1, since the only other possibility is selecting exactly 2 award-winners before selecting a JUNIOR:

P(more than 2) = 1 - P(exactly 2) = 1 - (P(not JUNIOR) x P(JUNIOR) x P(not JUNIOR)) = 1 - (0.77 x 0.23 x 0.77) = 0.567911

(c) The probability of selecting a SOPHOMORE is 0.12, and the probability of not selecting a SOPHOMORE is 0.88.

Since we are selecting award-winners until we select a SOPHOMORE, we can keep selecting SENIORS and JUNIORS until we select a SOPHOMORE.

Therefore, the probability of selecting 2 or fewer award-winners before selecting a SOPHOMORE is:

P(SOPHOMORE) + P(not SOPHOMORE) x P(JUNIOR) x P(SOPHOMORE) + P(not SOPHOMORE) x P(not JUNIOR) x P(JUNIOR) x P(SOPHOMORE) = 0.12 + (0.88 x 0.23 x 0.12) + (0.88 x 0.77 x 0.23 x 0.12) = 0.252744

To know more about event, visit:

https://brainly.com/question/12961938

#SPJ1

The value of the variable a in the equation is 5 from the calculation here.

We need to square of a number is described as a number that when multiplied by itself give the original number.

Also, index forms are described as those mathematical forms that are used to represent numbers that are too large or small.

From the information given, we have the equation;[tex]a^2[/tex]=25

find the square root of value of 25,

We have;25 = [tex]5^2[/tex]

Substitute the value, we get;[tex]a^2[/tex] =  [tex]5^2[/tex]

Take out the similar factor, this is their exponents.

We then have;

a = 5

Learn about square of a number at: https://brainly.com/question/27307830#SPJ1

Complete question;

Find the value of a in the equation;a² = 25

The value of x in the equation x² = -20 is x  = 2i√5

From the question, we have the following parameters that can be used in our computation:

x² = -20

To start with, we take the square root of both sides of the equation

So, we have

√x² = √-20

When the square roots are evaluated, we have

x  = √-20

Express -20 as 4 * -5

So, we have

x  = √4 * -5

This gives

x  = 2√-5

The expression √-5 is a complex number

So, we have

x  = 2i√5

Hence, the value of x in x² = -20 is x  = 2i√5

Read more about equation at

https://brainly.com/question/148035

#SPJ1

Answer:

12.5%

Step-by-step explanation:

We Know

A student scored 80 on a test last week and 90 on the same test this week.

What is the percent increase in the score?

We Tale

(90 ÷ 80) x 100 = 112.5%

Then we take

112.5 - 100 = 12.5%

So, the percent increase in score is 12.5%

The given angles are:

M arc CB=64°,M<AOC= 116° ,M arc AD=26°,M arc DFB=154°,M<CDB=32°.

First, we use the property that the measure of a central angle is equal to the measure of the intercepted arc.

Given that <COB = 64°, we know that the measure of arc CB is also 64°.

Next, we use the fact that the measure of an angle made on the circumference is half the measure of the angle made at the center.

We know that the measure of intercepted arc AD is 26°, and since the angle made at the center, <ABD, is 13°, we can calculate that the measure of arc AD is 2 x 13° = 26°.

Using the fact that a semicircle has a measure of 180°, we know that the measure of arc DFB is 180° - 26° = 154°.

Finally, we can use the angle CDB to find the missing angle.

We know that <CDB is an angle made on the circumference and that the measure of arc CB is 64°.

Thus, we can calculate that <CDB = 64°/2 = 32°.

Therefore, the missing angle is 32°.

Read more about angles here:

https://brainly.com/question/25716982

#SPJ1

According to the information, if the radio selects listerners randomly, the sample is random. But if they select listerners are selected without random method the sample may be biased.

If the radio station randomly selected a subset of their listeners and asked them to call in, then the sample would be random. This would help ensure that the sample is representative of the overall population of the radio station's listeners, and would allow for valid conclusions to be drawn about the preferences of the wider population based on the results of the survey.

However, if the radio station did not use a random sampling method, then the sample may be biased and not representative of the overall population of the radio station's listeners. For example, if the radio station only advertised the survey during certain times of day or on certain shows, then the sample may be biased towards listeners who are more likely to be listening during those times or shows. Similarly, if the radio station only advertised the survey on certain social media platforms or websites, then the sample may be biased towards listeners who use those platforms or websites.

Note: This question is incomplete. Here is the complete information:

State whether or not the sample is random. If it is not random, explain why

Learn more about survey in: https://brainly.com/question/30504929

#SPJ1

Answer:

(x - 8)^2 + (y + 10)^2 = 169

Step-by-step explanation:

you need to do completing the square

x^2 + y^2 -16x + 20y - 5 = 0

(x)^2 - 2(8)(x) + (y)^2 + 2(10)(y) - 5 = 0

(x)^2 + 2(-8)(x) + (-8)^2 - (-8)^2 + (y)^2 + 2(10)(y) + (10)^2 - (10)^2 - 5 = 0

[(x)^2 + 2(-8)(x) + (-8)^2] + [(y)^2 + 2(10)(y) + (10)^2] - (10)^2 - (-8)^2 - 5 = 0

### (a)^2 + 2(a)(b) + (b)^2 = (a + b)^2 ###

(x - 8)^2 + (y + 10)^2 -100 - 64 - 5 = 0

(x - 8)^2 + (y + 10)^2 -169 = 0

(x - 8)^2 + (y + 10)^2 = 169

Answer:

[tex]m = \frac{10 - 7}{7 - 3} = \frac{3}{4} [/tex]

The surface area of the triangular prism is 1740cm²

The area occupied by a three-dimensional object by its outer surface is called the surface area.

The surface area of a prism is expressed as;

SA = 2B + ph

where B is the base area

p is the perimeter of the base

h is the height of the prism.

Base area = 1/2 bh

= 1/2 × 10 × 24

= 24×5

= 120 cm²

The perimeter of the base = 24+10+26

= 60cm

height = 25 cm

Therefore the surface area of the prism is

SA = 2 × 120 + 60 × 25

SA = 240+ 1500

SA = 1740 cm²

learn more about surface area of prism from

https://brainly.com/question/1297098

#SPJ1

Answer:

[tex]a. \: 30 + a = 40 \\ a = 40 - 30 \\ a = 10 \\ b. \: 500 + b = 200 \\ b = 200 - 500 \\ b = - 300 \\ c. \: - 1 + c = - 2 \\ c = - 2 + 1 \\ c = - 1 \\ d. \: d +3.567=0 \\ d = 0 - 3.567 \\ d = - 3.567[/tex]

hope it helps:)

Answer:

2 x 3 matrix

Step-by-step explanation:

Answer:

Let x be the amount of the first alloy (30% gold) to be mixed and y be the amount of the second alloy (80% gold) to be mixed.

We can set up a system of two equations based on the information given:

x + y = 40 (total amount of alloy produced)

0.3x + 0.8y = 0.6(40) (amount of gold in the alloy produced)

Simplifying the second equation, we get:

0.3x + 0.8y = 24

Now we have a system of two equations:

x + y = 40

0.3x + 0.8y = 24

We can solve for x and y by using any method of solving systems of equations. Here, we will use the substitution method.

Solving the first equation for y, we get:

y = 40 - x

Substituting this expression for y into the second equation, we get:

0.3x + 0.8(40 - x) = 24

Simplifying and solving for x, we get:

0.3x + 32 - 0.8x = 24

-0.5x = -8

x = 16

So we need 16 grams of the first alloy and 24 grams of the second alloy to produce 40 grams of an alloy that is 60% gold.

She takes 69.5% as gross pay at take home,

Hence option (c) is correct.

Given that,

The amount of earning = $69500

From the given table total deduction = 812.85

Since she pay deductions in every two weeks

Therefore,

The gross earning per year = 69500 - 812.85

                                              = $ 48388

There are 365 days in a year

So earing per day = 69500/365 = 4190.411

So gross earing per day =  48388 /365 = 132.569

SO the gross percentage = (132.5/190.5)x100

                                          = 69.5 %

Hence the required percentage is 69.5%

To learn more about percentage visit:

https://brainly.com/question/24877689

#SPJ1

The conditional statement is solved and you could ask for an enrollment verification notice from the school

Given data ,

Let the statement be informally proven that you are taking courses online

And , To informally prove that you are taking courses online, you can contact the professors of the courses via email and obtain informal permission from them first.

Then you can initiate the request using the new online information system of the school to obtain an enrollment verification notice

It is a legitimate document that the school has produced that may be utilized for a number of things, including debt deferments, employment, and insurance.

Hence , the conditional statement is solved

To learn more about conditional statements click :

https://brainly.com/question/18152035

#SPJ1

Answer:

5 baby goats

Step-by-step explanation:

4 + 1 = 5 pints total

each baby goat gets 1 pint

Answer is 16.4. Hope this helpsAnswer:

Step-by-step explanation:

(2/√3) can be rationalized by multiplying both the numerator and the denominator by √3 to get (2√3/3) .

The square root is the value that gives a prime number multiplied by itself. Four methods  can be used to find the square root: prime factorization, repeated subtraction, long division, and the evaluation method.

In geometry, we often encounter the square root when calculating the size of shapes, such as the length, area or volume of certain geometric shapes. Simplifying square roots can make calculations much easier and more efficient.

Here are some rules for simplifying square roots:

Simplify perfect squares under the radical sign: For example, √9 = 3 and √25 = 5.  Multiplying or dividing a number outside the radical sign: For example, 2√3 can be simplified to √12. Adding or subtracting like terms: For example, 3√2 2√2 = 5√2.

You can rationalize the denominator by multiplying the numerator and denominator by the conjugate of the denominator: For example, (2/√3) can be rationalized by multiplying both the numerator and the denominator by √3 to get (2√3/3) .

Applying these rules, we can simplify the square root and make calculations easier and more accurate in geometric problems..

Learn more about Long division method here

https://brainly.com/question/3935316

#SPJ1

1. To find the interest we will use = (D6*D5) - B8,  2. To find the total cost we will use = B6 + D7.

Here we are given the financial information of a firm and are required to give an appropriate formula for total interest and total cost

1.

Here we need to multiply D6 and D7 and subtract B8 from the result. We cannot use any function. Hence we will simply write

= (D6*D5) - B8

The bracket is not necessary but can be put s an added satisfaction that the said formula would multiply the cells first and then only will the loan amount would be subtracted.

2.

Similarly, for cell D8, we need to go to the formula bar and write

= B6 + D7

This will add the cells up to give us the total cost.

To learn more about MS Exel visit

https://brainly.com/question/29596467

#SPJ1

Complete Question

(Image Attached)

The probability that the population percentage would differ from the sample proportion of flops in a sample of 407 released films by less than 3% is roughly 0.8354, rounded to four decimal places.

For the trials we are looking at, the probability of receiving a success in a binomial distribution must stay constant. Since there are only two possible outcomes when tossing a coin, for instance, the probability of flipping a coin is 12 or 0.5 for each experiment we conduct.

To determine the likelihood that the sample proportion of flops is within 3% of the population proportion, we need to know the chance that |p - 0.09| 0.03.

We can suppose that the sample proportion's distribution is

approximately normal with mean μ = 0.09 and standard deviation σ = √((0.09)(0.91)/407)

≈ 0.017.

We may calculate the z-scores for the top and lower boundaries of the interval using the conventional normal distribution:

z1 = (0.06 - 0.09) / 0.017 ≈ -1.76

z2 = (0.12 - 0.09) / 0.017 ≈ 1.76

The probability between these two z-scores is represented by the region beneath the standard normal curve:

P(-1.76 < Z < 1.76)

= 0.9177 - 0.0823

= 0.8354

To know more about probability visit:-

https://brainly.com/question/17081293

#SPJ9

Answer:

17

Step-by-step explanation:

11+6=17

(a) The exact value of sin B is 6 / 12.53

(b) The exact value of tan A is 11 / 6

(c) The exact value of cos A is 6 / 11

The value of sin (B), cos (A) and tan (A) is calculated by applying trigonometry ratio as follows;

The trigonometry ratio is simplified as;

SOH CAH TOA;

SOH ----> sin θ = opposite side / hypothenuse side

CAH -----> cos θ = adjacent side / hypothenuse side

TOA ------> tan θ = opposite side / adjacent side

The value of the hypotenuse side of the right triangle is;

L = √ (6² + 11²)

L = 12.53

(a) The exact value of sin B is;

sin B = 6 / 12.53

(b) The exact value of tan A is;

tan A = 11 / 6

(c) The exact value of cos A is;

cos A = 6 / 11

Learn more about trigonometry ratio here: brainly.com/question/10417664

#SPJ2

Using a linear equation, the minutes it would take both pipes to drain the swimming pool that holds 450,000 liters is 90 minutes.

A linear equation is an equation of a straight line written in the form of y = mx +b, where m is the slope.

The quantity of water the swimming pool holds = 450,000 liters

The drainage time of Pipe A working alone = 150 minutes

Drainage rate of Pipe A = 3,000 liters per minute (450,000 ÷ 150)

The drainage time of Pipe B working alone = 225 minutes

Drainage rate of Pipe B = 2,000 liters per minute (450,000 ÷ 225)

The drainage rate of the combined pipes = 5,000 liters per minute (3,000 + 2,000)

Let the number of minutes for both pipes to drain the pool = x

Therefore, the linear equation is 5,000x = 450,000

x = 90 minutes (450,000 ÷ 5,000)

Learn more about linear equations at https://brainly.com/question/28732353.

#SPJ1

Answer:

[tex]v = \pi {r}^{2} h[/tex]

[tex] {r}^{2} = \frac{v}{\pi \times h} [/tex]

[tex]r = \sqrt{ \frac{v}{\pi \times h} } [/tex]

D is the correct answer.

"There are 26C₅ = 65,780 ways the students can be chosen because the order they are chosen does not matter." is correct statement. Therefore, the answer is option C.

The problem asks us to choose 5 students out of a class of 26 to present homework problems. Since the order in which the students present the problems does not matter, we need to use the combination formula. The combination formula is used to calculate the number of ways to choose a subset of k elements from a set of n elements without regard to order, and it is denoted by nCk.

Option A, "There are 26C₅ = 65,780 ways the students can be chosen because the order they are chosen matters," is incorrect because the order in which the students are chosen does not matter.

Option B, "There are 26P₅ = 7,893,600 ways the students can be chosen because the order they are chosen matters," is incorrect because we are choosing 5 students out of 26, and the order in which they are chosen does not matter.

Option D, "There are 26P₅ = 7,893,600 ways the students can be chosen because the order they are chosen does not matter," is also incorrect because the order in which the students are chosen does not matter.

Therefore, the answer is option C.

To learn more about combination click on,

https://brainly.com/question/30975309

#SPJ1

Complete question is:

In a class of 26 students, a teacher chooses a different student to each present five different homework problems. Which statement describes the number of ways the students can be chosen to present the problems?

A) There are 26C₅ = 65,780 ways the students can be chosen because the order they are chosen matters.

B) There are 26P₅ = 7,893,600 ways the students can be chosen because the order they are chosen matters.

C) There are 26C₅ = 65,780 ways the students can be chosen because the order they are chosen does not matter.

D) There are 26P₅ = 7,893,600 ways the students can be chosen because the order they are chosen does not matter.

If the terminal point of θ  is (0, -1) then tanθ is undefined.

The point (0, -1) lies on the negative y-axis.

Since the tangent function is defined as the ratio of the opposite side to the adjacent side of a right triangle, and the adjacent side is zero for any point on the y-axis, the tangent of θ is undefined.

Therefore, if the terminal point of θ  is (0, -1) then tanθ is undefined.

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ1