An object is placed 45 cm to the left of a converging lens of focal length with a magnitude of 25 cm. Then a diverging lens of focal length of magnitude 15 cm is placed 35 cm to the right of this lens. Where does the final image form for this combination? in cm with appropriate sign with respect to diverging lens, real of virtual image?(make sure to answer this last part)

Answers

Answer 1

The image distance for the diverging lens (v_diverging) will be the object distance for the converging lens (u_converging). Using the values obtained for v_converging and v_diverging, we can determine the final image distance and whether it is a real or virtual image.

To find the final image formed by the combination of lenses, we can use the lens formula and the concept of image formation.

Let's consider the converging lens first. The lens formula is given by:

1/f_converging = 1/v_converging - 1/u_converging

where f_converging is the focal length of the converging lens, v_converging is the image distance, and u_converging is the object distance.

Given that the object is placed 45 cm to the left of the converging lens (u_converging = -45 cm) and the focal length of the converging lens is 25 cm (f_converging = 25 cm), we can calculate v_converging.

1/25 = 1/v_converging - 1/(-45)

Simplifying this equation will give us the value of v_converging.

Now let's consider the diverging lens. The lens formula for the diverging lens is:

1/f_diverging = 1/v_diverging - 1/u_diverging

where f_diverging is the focal length of the diverging lens, v_diverging is the image distance, and u_diverging is the object distance.

In this case, the object is placed 35 cm to the right of the diverging lens (u_diverging = 35 cm) and the focal length of the diverging lens is 15 cm (f_diverging = -15 cm, negative because it's a diverging lens).

Using the lens formula, we can calculate v_diverging.

Now, to determine the final image formed by the combination of lenses, we need to consider the relative position of the two lenses. Since the diverging lens is placed to the right of the converging lens, the image formed by the converging lens will act as the object for the diverging lens.

To know more about converging lens

https://brainly.com/question/29178301

#SPJ11


Related Questions

Solve numerically for the thermal efficiency, η, assuming that T h

=910 ∘
C and T c

=580 ∘
C. Numeric : A numeric value is expected and not an expression. η= =1− 1183.15K
331.15K

=.72011=7 Problem 5: Suppose you want to operate an ideal refrigerator that has a cold temperature of −10.5 ∘
C, and you would like it to have a coefficient of performance of 5.5. What is the temperature, in degrees Celsius, of the hot reservoir for such a refrigerator? Numeric : A numeric value is expected and not an expression. T h

=

Answers

Therefore, the numeric value is 339.1.

Given, the hot and cold temperatures of the refrigerator, respectively are Th = 910 °C and Tc = 580 °C. We are supposed to solve numerically for the thermal efficiency η.

Formula to calculate the efficiency of the heat engine is given by:η=1- (Tc/Th)η = 1 - (580 + 273.15) / (910 + 273.15)η = 0.72011Hence, the thermal efficiency η is 0.72011. The numeric value is given as 0.72011. Therefore, the numeric value is 0.72011.

Now, let's solve the second problem.Problem 5:Suppose you want to operate an ideal refrigerator that has a cold temperature of -10.5°C, and you would like it to have a coefficient of performance of 5.5. What is the temperature, in degrees Celsius,

of the hot reservoir for such a refrigerator?

The formula to calculate the coefficient of performance of a refrigerator is given by:K = Tc / (Th - Tc)The desired coefficient of performance of the refrigerator is given as 5.5. We are supposed to calculate the hot temperature, i.e., Th.

Thus, we can rearrange the above formula and calculate Th as follows:Th = Tc / (K - 1) + TcTh = (-10.5 + 273.15) / (5.5 - 1) + (-10.5 + 273.15)Th = 325.85 / 4.5 + 262.65 = 339.1 °CHence, the temperature of the hot reservoir for such a refrigerator is 339.1 °C.

The numeric value is given as 339.1.

to know more about thermal efficiency

https://brainly.com/question/13982702

#SPJ11

An electron is accelerated from rest by a potential difference of 350 V. It than enters a uniform magnetic field of magnitude 200 mT with its velocity perpendicular to the field. Calculate (a) the speed of the electron and (b) the radius of its path in the magnetic field. * (2 Points) O 7.11 x 10^7 m/s, 3.16 x 10^-4 m 5.11 x 10^7 m/s, 6.16 x 10^-4 m 1.11 x 10^7 m/s, 3.16 x 10^-4 m O 3.11 x 10^7 m/s, 3.16 x 10^-4 m O 1.11 x 10^7 m/s, 6.16 x 10^-4 m

Answers

Substituting the values, we getr = [(9.11 × 10⁻³¹ kg)(1.11 × 10⁷ m/s)]/[(1.6 × 10⁻¹⁹ C)(200 mT)]r = 3.16 × 10⁻⁴ mTherefore, the answer is 1.11 x 10^7 m/s, 3.16 x 10^-4 m.

(a) Speed of the electronThe formula for potential energy isPE = qVWhere q is the charge and V is the potential difference. The electron is negatively charged, and its charge is 1.6 × 10⁻¹⁹ C.Therefore, PE = (1.6 × 10⁻¹⁹ C)(350 V)PE = 5.6 × 10⁻¹⁷ JThe formula for kinetic energy isKE = (1/2)mv²where m is the mass and v is the velocity of the electron. The mass of the electron is 9.11 × 10⁻³¹ kg.Using the law of conservation of energy, we can equate the kinetic energy of the electron with the potential energy it gains when accelerated by the potential difference.

Kinetic energy of the electron = Potential energy gainedKE = PEKE = 5.6 × 10⁻¹⁷ Jv² = (2KE)/mv² = (2(5.6 × 10⁻¹⁷ J))/(9.11 × 10⁻³¹ kg)v² = 1.23 × 10¹⁷v = √(1.23 × 10¹⁷)v = 1.11 × 10⁷ m/s(b) Radius of the pathThe formula for the radius of the path of a charged particle moving in a magnetic field isr = (mv)/(qB)where r is the radius, m is the mass of the charged particle, v is its velocity, q is its charge, and B is the magnetic field strength.Substituting the values, we getr = [(9.11 × 10⁻³¹ kg)(1.11 × 10⁷ m/s)]/[(1.6 × 10⁻¹⁹ C)(200 mT)]r = 3.16 × 10⁻⁴ mTherefore, the answer is 1.11 x 10^7 m/s, 3.16 x 10^-4 m.

Learn more about Velocity here,

https://brainly.com/question/80295

#SPJ11

The sun is 150,000,000 km from earth; its diameter is 1,400,000 km. A student uses a 5.4-cm-diameter lens with f = 10 cm to cast an image of the sun on a piece of paper.
What is the intensity of sunlight in the projected image? Assume that all of the light captured by the lens is focused into the image
The intensity of the incoming sunlight is 1050 W/m²

Answers

The intensity of sunlight in the projected image is calculated to bee 7.271x10¹⁹ W/m².

In this scenario, a student utilizes a lens with a diameter of 5.4 cm and a focal length of 10 cm to project an image of the sun onto a piece of paper. The sun, positioned 150,000,000 km away from Earth, has a diameter of 1,400,000 km. The image formed is obtained using the lens formula. It is given by the relation as:

[tex]$$\frac {1}{f}=\frac {1}{u}+\frac {1}{v}$$[/tex]

Using the relation, the image distance (v) can be calculated as;

[tex]$$\frac {1}{10}=\frac {1}{150000000}-\frac {1}{u}$$[/tex]

The value of u comes out to be 1.4999 x 10⁹ m.

Using the formula for magnification, the magnification can be calculated as,

[tex]$$\frac {v}{u}=\frac {h'}{h}$$[/tex]

Where h' is the height of the imageh is the height of the object.

Height of the object, h = 1.4 x 10⁹ mHeight of the image, h' = 0.054 m

Therefore, the magnification is,

[tex]$$M=\frac {0.054}{1.4 x 10^9}=-3.8571x10^{-8}$$[/tex]

The negative sign in the magnification value indicates that the image is formed upside down or inverted. The intensity of sunlight in the projected image is given by the relation;

[tex]$$I'=\frac {I}{M^2}$$[/tex]

Where, I is the intensity of the incoming sunlight

The value of I is given to be 1050 W/m²

Therefore, substituting the given values in the above relation, we get,

[tex]$$I'=\frac {1050}{(-3.8571x10^{-8})^2}$$[/tex]

The value of I' comes out to be 7.271x10¹⁹ W/m².

Learn more about intensity at: https://brainly.com/question/28145811

#SPJ11

A string of 50 identical tree lights connected in series dissipates 100 W when connected to a 120 V power outlet. How much power is dissipated by each light? Suppose that you are experimenting with a 15 V source and two resistors: R₁ = 2500 2 and R₂ = 25 02. Find the current for a, b, c, and d below. What do you notice? a. R₁ in series with R₂ (Answer in mA)

Answers

The total current in the circuit is the sum of the currents through R₁ and R₂. Therefore,It = IR₁ + IR₂= (5.94 mA) + (5.94 mA)= 11.88 mA= 0.01188 Ad) I noticed that the total current through the circuit is equal to the sum of the currents through R₁ and R₂. Therefore, the current in a series circuit is the same through all components.

Given: Number of lights connected in series, n = 50Power dissipated by the string of lights = P = 100 WVoltage of the power outlet = V = 120 VTo find: Power dissipated by each lightSolution:We know that the formula for power is:P = V * IWhere,P = Power in wattsV = Voltage in voltsI = Current in amperesWe can rearrange the above formula to get the current:I = P / VSo, the current through the string of 50 identical lights is:I = P / V = 100 W / 120 V = 0.833 AWhen identical resistors are connected in series, the voltage across them gets divided in proportion to their resistances.

The formula for calculating the voltage across a resistor in a series circuit is:V = (R / Rtotal) * VtotalWhere,V = Voltage across the resistorR = Resistance of the resistorRtotal = Total resistance of the circuitVtotal = Total voltage across the circuita) Current through R₁ in series with R₂ can be calculated as follows:First, calculate the total resistance of the circuit:Rtotal = R₁ + R₂= 2500 Ω + 25 Ω= 2525 ΩNow, calculate the current using Ohm's law:I = V / Rtotal= 15 V / 2525 Ω= 0.00594 A= 5.94 mAb) The current through R₂ is the same as the current through R₁, which is 5.94 mA.c)

The total current in the circuit is the sum of the currents through R₁ and R₂. Therefore,It = IR₁ + IR₂= (5.94 mA) + (5.94 mA)= 11.88 mA= 0.01188 Ad) I noticed that the total current through the circuit is equal to the sum of the currents through R₁ and R₂. Therefore, the current in a series circuit is the same through all components.

Learn more about Proportion here,

https://brainly.com/question/870035

#SPJ11

A diagram of UML Charts for an application that can be used to
estimate the SNR of a typical earth-satellite communication
system?

Answers

Use Case Diagram: User:  Represents the user interacting with the application.

Here is a possible diagram using UML (Unified Modeling Language) to represent the different components of an application for estimating the Signal-to-Noise Ratio (SNR) of an earth-satellite communication system:

Use Case Diagram:

User: Represents the user interacting with the application.

Estimate SNR: Use case that describes the main functionality of the application.

Class Diagram:

SNREstimationApp: Represents the main application class.

Satellite: Represents the satellite in the communication system.

EarthStation: Represents the earth station in the communication system.

Sequence Diagram:

User →SNREstimationApp: Triggers the SNR estimation process.

SNREstimationApp → Satellite: Requests information from the satellite.

Satellite → SNREstimationApp: Provides satellite-specific data.

SNREstimationApp → EarthStation: Requests information from the earth station.

EarthStation → SNREstimationApp: Provides earth station-specific data.

SNREstimationApp → CalculationEngine: Performs SNR calculation using the provided data.

CalculationEngine → SNREstimationApp: Returns the calculated SNR value.

SNREstimationApp → User: Presents the SNR value to the user.

Component Diagram:

SNREstimation App: Represents the main component of the application.

Satellite API: Represents the interface or API for retrieving satellite information.

EarthStation API: Represents the interface or API for retrieving earth station information.

Calculation Engine: Represents the component responsible for performing the SNR calculation.

To know more about Class Diagram:

https://brainly.com/question/32075946

#SPJ4

A generator supplies 100 V to a transformer's primary coil, which has 60 turns. If the secondary coil has 640 turns, what is the secondary voltage? Number Units

Answers

A generator supplies 100 V to a transformer's primary coil, which has 60 turns. If the secondary coil has 640 turns, the secondary voltage is 1067 V.

The voltage ratio in a transformer is equal to the turns ratio. In this case, the turns ratio is given as:

Turns ratio = (Number of turns in secondary coil) / (Number of turns in primary coil)

Given that the number of turns in the primary coil is 60 and the number of turns in the secondary coil is 640, the turns ratio is:

Turns ratio = 640 / 60 = 10.67

The voltage ratio is the same as the turns ratio. Therefore, the secondary voltage can be calculated by multiplying the primary voltage by the turns ratio:

Secondary voltage = (Primary voltage) x (Turns ratio)

Since the primary voltage is given as 100 V, we can calculate the secondary voltage as:

Secondary voltage = 100 V x 10.67 = 1067 V

Therefore, the secondary voltage is 1067 V.

To learn more about transformer  visit: https://brainly.com/question/23563049

#SPJ11

To prove the validity of the kinematics equations for projectile motion, a projectile is launched from a gun several times, and the distances and heights for each run are measured. Explain the importance of the standard deviation for this experiment and for physics experiments in general, and why the average alone isn't sufficient.

Answers

In this experiment to prove the validity of the kinematics equations for projectile motion, the projectile is launched from a gun multiple times, and the distances and heights for each run are measured.

The importance of the standard deviation for this experiment and for physics experiments in general and why the average alone isn't sufficient is explained below: Standard deviation: Standard deviation (SD) is a statistical term that measures the amount of variability or dispersion in a dataset's data points.

The average alone is insufficient to describe a data set since it can conceal significant variations in the data. The standard deviation, on the other hand, quantifies how much the data deviates from the average, and hence gives a better understanding of the data's variability. Importance of standard deviation in this experiment:

It's crucial to use standard deviation to analyze data from projectile motion experiments since the data collected is likely to contain a variety of outliers and other variables. The SD value in projectile motion tests aids in determining the data's reliability. It is a way to measure how different the data is from each other.

Since the standard deviation quantifies how much the data points deviate from the average, it is a better representation of the data's variability, which is critical in determining the projectile's trajectory and motion. The SD helps us to comprehend the significance of the results we've got and how reliable they are.

Therefore, SD is an essential tool to calculate the reliability of any scientific experiment.

To learn about kinematics here:

https://brainly.com/question/29563356

#SPJ11

What happens to a circuit's resistance (R), voltage (V), and current (1) when
you change the thickness of the wire in the circuit?
A. V and I will also change, but R will remain constant.
B. R and I will also change, but V will remain constant.
O C. R, V, and I will all remain constant.
OD. R and V will also change, but I will remain constant.

Answers

When you change the thickness of the wire in a circuit, option B. the resistance (R) and current (I) will also change, but the voltage (V) will remain constant.

The resistance of a wire is directly proportional to its length and inversely proportional to its cross-sectional area (thickness). As the thickness of the wire changes, the cross-sectional area changes, which in turn affects the resistance. Thicker wires have a larger cross-sectional area, resulting in lower resistance, while thinner wires have a smaller cross-sectional area, resulting in higher resistance. Therefore, changing the thickness of the wire will cause a change in resistance.

According to Ohm's Law (V = IR), the voltage (V) in a circuit is equal to the product of the current (I) and the resistance (R). If the voltage is kept constant, and the resistance changes due to the thickness of the wire, the current will also change to maintain the relationship defined by Ohm's Law. When the resistance increases, the current decreases, and vice versa.

However, it's important to note that changing the thickness of the wire will not directly affect the voltage. The voltage in a circuit is determined by the power source or the potential difference applied across the circuit and is independent of the wire thickness. As long as the voltage source remains constant, the voltage across the circuit will remain constant regardless of the wire thickness. Therefore, the correct answer is option B.

know more about current here:

https://brainly.com/question/1100341

#SPJ8

What is the capacitance of a parallel plate capacitor with plates that have an area of 3.97 m’ and are separated by a distance of 0.066 mm (in vacuum, use K 1)? Remember that co 8.25 x 10 12 c²/Nm² *Provide exponential answers in the format. EU (CE 1.85 x 10-12 8.85E-12)

Answers

The capacitance of a parallel plate capacitor with plates having an area of 3.97 m² and separated by a distance of 0.066 mm (in vacuum) is approximately [tex]1.85\times10^{-12}\ \text{F}[/tex]

The capacitance of a parallel plate capacitor is given by the formula [tex]C = (\varepsilon_0A) / d[/tex], where C represents capacitance, ε₀ represents the permittivity of free space, A represents the area of the plates, and d represents the distance between the plates.

Given values:

A = 3.97 m² (plate area)

d = 0.066 mm =[tex]0.066\times10^{-3}\ \text{m}[/tex] (plate separation in meters)

ε₀ =[tex]8.85 \times 10^{-12}\ \text{C}^{2}/\text{N}\text{m}^{2}[/tex] (permittivity of free space)

Substituting these values into the capacitance formula, we get:

C = (ε₀A) / d = [tex](8.85 \times 10^{-12}\times3.97 ) / 0.066 \times 10^{-3}[/tex]

Simplifying this expression, we have:

C = [tex]35.06 \times 10^{-15}\ \text{ F}[/tex]

To express the answer in exponential format, we convert the final value to the standard form:

C ≈[tex]1.85\times10^{-12}\ \text{F}[/tex]

Learn more about capacitance here:

https://brainly.com/question/31871398

#SPJ11

Light of wavelength 546 nm (the intense green line from a mercury source) produces a Young's interference pattern in which the second minimum from the central maximum is along a direction that makes an angle of 15.0 min of arc with the axis through the central maximum. What is the distance between the parallel slits? 1 mm

Answers

Light of wavelength 546 nm (the intense green line from a mercury source) produces a Young's interference pattern in which the second minimum from the central maximum is along a direction that makes an angle of 15.0 min of arc with the axis through the central maximum. The distance between the parallel slits is approximately 5.92 mm.

To solve this problem, we can use the formula for the position of the nth minimum in a Young's interference pattern:

θ = nλ / d

where:

θ is the angle of the nth minimum from the central maximum,

λ is the wavelength of light, and

d is the distance between the parallel slits.

In this case, we are given:

λ = 546 nm = 546 × 10^(-9) m (converting nanometers to meters),

θ = 15.0 min of arc = 15.0 × (1/60) degrees = 15.0 × (1/60) × (π/180) radians (converting minutes to radians).

We need to find the value of d.

Rearranging the formula, we can solve for d:

d = nλ / θ

Plugging in the given values:

d = (1 × 546 × 10^(-9)) / (15.0 × (1/60) × (π/180))

= (546 × 10^(-9) × 60 × 180) / (15.0 × π)

≈ 5.917 × 10^(-3) m

≈ 5.92 mm

Therefore, the distance between the parallel slits is approximately 5.92 mm.

To learn more about  Young's interference pattern visit: https://brainly.com/question/3571781

#SPJ11

In lecture, we learned that dimensions of a quantity can be expressed as a product of the basic physical dimensions of length, mass and time, each raised to a rational power. Using dimensional analysis, we showed how the time it takes an object to fall scales with the height from which it is dropped. Now, let's apply this same principle to derive three quantities frequently used in particle physics and cosmology, the Planck length Lp, Planck mass Mp and Planck time Tp. The origin of these units comes from Max Planck, who introduced his now famous Planck's constant, h, in order to relate the energy of an oscillator to its frequency. = 1 Armed with the knowledge that h = 6.6 × 10-34 J. › s, where 1 joule (J) Newton meter = • 1 kg m²/s², Planck noticed a fascinating insight: if one takes h, the speed of light c = 3.0 × 10³m/s, and Newton's gravitational constant G = 6.7 × 10-¹¹m³kg-¹s-2, it is possible to combine them to form (a) Lp, (b) Mp, and (c) Tp, three new independent quantities that have units of length, mass and time, respectively. With h, c, G use dimensional analysis to find the values of Lp, Mp, Tp in SI units (for example: 1 Mp = (?)kg). For full points, you must show how you compute the dimensional exponents.

Answers

The Planck length Lp has a value of 1.6 × 10^-35 m, the Planck mass Mp has a value of 2.18 × 10^-8 kg, and the Planck time Tp has a value of 5.39 × 10^-44 s.

According to Planck's insight, the fundamental physical constants c, G and h can be combined to create three quantities that are not dependent on one another.

These quantities are known as Planck length Lp, Planck mass Mp, and Planck time Tp and are defined as follows:

Lp = √(Gh/c³) = 1.6 × 10^-35 mMp = √(h*c/G) = 2.18 × 10^-8 kgTp = √(Gh/c^5) = 5.39 × 10^-44 s

Where G is the gravitational constant with a value of 6.674 × 10^-11 Nm²/kg², h is Planck's constant with a value of 6.626 × 10^-34 J s, and c is the speed of light in a vacuum with a value of 299,792,458 m/s.

Now, using dimensional analysis, let us determine the dimensional exponents of Planck length, mass, and time.

Dimensional formula of G = M^-1L^3T^-2; h = M^1L^2T^-1; and c = LT^-1.

Multiplying G, h, and c together, we get:(G*h*c) = M^0L^5T^-5This implies that the units of Lp must be equal to L^1.

To find the exponent for mass, we simply divide (G*h/c³) by the speed of light

(c). Doing so gives us a result of: Mp = √(h*c/G) = √(6.626 × 10^-34 J s × 299,792,458 m/s / 6.674 × 10^-11 Nm²/kg²) = 2.18 × 10^-8 kg

This means that the exponent of mass must be equal to M^1.

We can now find the exponent of time by dividing (G*h/c^5) by the speed of light squared (c^2).

Doing so gives us a result of:Tp = √(G*h/c^5) = √(6.674 × 10^-11 Nm²/kg² × 6.626 × 10^-34 J s / (299,792,458 m/s)^5) = 5.39 × 10^-44 s

This implies that the exponent of time must be equal to T^1.

Therefore, the Planck length Lp has a value of 1.6 × 10^-35 m, the Planck mass Mp has a value of 2.18 × 10^-8 kg, and the Planck time Tp has a value of 5.39 × 10^-44 s.

Learn more about Planck length here:

https://brainly.com/question/857839

#SPJ11

It is known that the voltage measured by the voltmeter is 5 Volt 1. Calculate the value of the current Isot through the battery BAT1 (It is the current that the amperemeter shows) 2. Calculate the value of the Resistance R. 3. Calculate the power provided por the battery to the system 4. Calculate the Power released by each one of the Resistances R1, R2, and R, 5. Explain if there is a relation between the Power provided por the battery Post and the Pow released by the Resistances Ry, R2, and Rz. Justify your answer with your calculations

Answers

1. Current passing through the battery BAT1 can be calculated using the Ohm's Law formula as, V = IR. I = V/R = 5/20 = 0.25 A.

2. Resistance value R can be calculated using the Ohm's Law formula as, V = IR. R = V/I = 5/0.25 = 20 ohms.

3. The power provided by the battery to the system can be calculated using the formula, P = VI. P = 5 x 0.25 = 1.25 W.

4. The power released by each resistance R1, R2, and R can be calculated using the formula, P = I^2R.

For R1, P = I^2R = 0.25^2 x 10 = 0.625 W.
For R2, P = I^2R = 0.25^2 x 20 = 1.25 W.
For R, P = I^2R = 0.25^2 x 40 = 2.5 W.

5. The total power released by resistors R1, R2, and R is 4.375 W (0.625 + 1.25 + 2.5 = 4.375 W), which is less than the power provided by the battery to the system (1.25 W). This indicates that some power is being lost in the circuit, possibly due to factors like internal resistance of the battery and resistance of wires and connections.

There is no direct relation between the power provided by the battery and the power released by the resistances. However, the sum of power released by all the resistances should be less than or equal to the power provided by the battery according to the Law of Conservation of Energy.

Learn more about Law of Conservation of Energy here

https://brainly.in/question/1062718

#SPJ11

A 3-phase electrical device connected as a Y circuit with each phase having a resistance of 25 ohms. The line voltage is 230 volts.
a. What is the phase current??

Answers

In a Y-connected circuit, the line voltage (V_line) is equal to the phase voltage (V_phase). Therefore, the line voltage is 230 volts. The phase current in the Y-connected circuit is 9.2 Amperes.

To calculate the phase current (I_phase), we need to use Ohm's Law. Ohm's Law states that the current (I) flowing through a resistor is equal to the voltage (V) across the resistor divided by the resistance (R).

In this case, the resistance of each phase is given as 25 ohms. Since the line voltage (V_line) is equal to the phase voltage (V_phase), we can use the line voltage in the calculation.

Using Ohm's Law: I_phase = V_phase / R_phase

Since V_line = V_phase, we can substitute the values: I_phase = V_line / R_phase

Substituting V_line = 230 volts and R_phase = 25 ohms, we get:

I_phase = 230 V / 25 Ω = 9.2 Amperes

Therefore, the phase current in the Y-connected circuit is 9.2 Amperes.

To know more about phase current click here:

https://brainly.com/question/19578744

#SPJ11

At some instant the velocity components of an electron moving between two charged parallel plates are v x

=1.6×10 5
m/s and v y

=3.5×10 3
m/s. Suppose the electric field between the plates is uniform and given by E
=(120 N/C) j
^

. In unit-vector notation, what are (a) the electron's acceleration in that field and (b) the electron's velocity when its x coordinate has changed by 2.4 cm ?

Answers

Therefore, we have vy = vy,0 + ayt = (3.5 x 10^3 m/s) + (7.21 x 10^17 m/s^2)(1.5 x 10^-7 s) = 3.508 m/s. Thus, the electron's velocity when its x-coordinate has changed by 2.4 cm is v = (1.6 x 10^5 m/s)i + 3.508 m/sj. The required answer in unit-vector notation is v = (1.6 x 10^5 m/s)i + 3.508 m/sj. The solution has been presented in more than 150 words.

(a) To find the acceleration of the electron in the given electric field, we will use the formula F = ma, where F is the force acting on the electron, m is its mass, and a is its acceleration. The force acting on the electron due to the electric field is given by F = qE, where q is the charge of the electron and E is the electric field. Therefore,

we have F = (1.6 x 10^-19 C)(120 N/C)j = 1.92 x 10^-17 Nj.Using Newton's second law, F = ma, we can find the acceleration of the electron as a = F/m = (1.92 x 10^-17 Nj)/(9.11 x 10^-31 kg) = 2.1electron's1 x 10^13 m/s^2. Therefore, the electron's acceleration in the given electric field is a = 2.11 x 10^13 j m/s^2.

(b) To find the electron's velocity when its x-coordinate changes by 2.4 cm, we will first find the time taken by the electron to move this distance. The x-component of the electron's velocity is given as vx = 1.6 x 10^5 m/s, so we have x = vxt => t = x/vx = (2.4 x 10^-2 m)/(1.6 x 10^5 m/s) = 1.5 x 10^-7 s.

The acceleration of the electron in the y-direction is given by ay = Fy/m = (qEy)/m = (1.6 x 10^-19 C)(3.5 x 10^3 m/s)(120 N/C)/(9.11 x 10^-31 kg) = 7.21 x 10^17 m/s^2. Since the acceleration is constant, we can use the kinematic equation vy = u + at, where u is the initial velocity in the y-direction, to find the final velocity of the electron in the y-direction. The initial velocity vy,0 in the y-direction is given as vy,0 = 3.5 x 10^3 m/s, and the time t is 1.5 x 10^-7 s.

Therefore, we have vy = vy,0 + ayt = (3.5 x 10^3 m/s) + (7.21 x 10^17 m/s^2)(1.5 x 10^-7 s) = 3.508 m/s. Thus, the electron's velocity when its x-coordinate has changed by 2.4 cm is v = (1.6 x 10^5 m/s)i + 3.508 m/sj. The required answer in unit-vector notation is v = (1.6 x 10^5 m/s)i + 3.508 m/sj. The solution has been presented in more than 150 words.

to know more about electron

https://brainly.com/question/14388606

#SPJ11

Find the range in wavelengths (in vacuum) for visible light in the frequency range between 7.9 × 10¹⁴ Hz (violet light) Express the answers in nanometers. (Express your answer in whole number)

Answers

The range in wavelengths (in vacuum) for visible light in the frequency range between 7.9 × 10¹⁴ Hz (violet light) is 380 nm (approx).

The formula is given as:

frequency = (speed of light) / (wavelength)

Where:

frequency = 7.9 x 10¹⁴ Hz

speed of light = 3 x 10⁸ m/s (in vacuum)

Solving for wavelength:

wavelength = (speed of light) / (frequency)

Therefore, wavelength = (3 x 10⁸) / (7.9 x 10¹⁴) = 3.80 x 10⁻⁷ m or 380 nm (approx)

Hence, the range in wavelengths (in vacuum) for visible light in the frequency range between 7.9 × 10¹⁴ Hz (violet light) is 380 nm (approx).

Learn more about frequency: https://brainly.com/question/254161

#SPJ11

A series RL circuit includes a 2.05 V battery, a resistance of R=0.555Ω, and an inductance of L=2.63H. What is the induced emf1.68 s after the circuit has been closed? induced emf:

Answers

The value of induced emf 1.68 seconds after the circuit is closed is approximately equal to 0.522 V.

The voltage, `V` across a series RL circuit, at any given time is given by `V = IR + L (di/dt)

If a 2.05 V battery is connected to a series RL circuit, a resistance of R = 0.555 Ω and an inductance of L = 2.63 H is present. To determine the induced emf 1.68 s after the circuit is closed, the current flowing through the circuit is required.

The current flow is determined by using Ohm's Law:V = IR

Let us determine the current flowing through the circuit by using Ohm's Law: V = IR => I = V/R = 2.05/0.555 = 3.69

A`The voltage drop across the inductor is given by `L (di/dt)`; where `i` is the current flowing through the circuit. The current flowing through the circuit can be represented by the following expression:

i = I (1 - [tex]e^{-Rt/L}[/tex]).

Using the expression for current, we get di/dt = R/L I ( [tex]e^{-Rt/L}[/tex]).

The voltage across the inductor, at any given time t after the circuit is closed, is therefore given by:`

VL = L (di/dt) = L (R/L I ( [tex]e^{-Rt/L}[/tex]).

Substituting the values, we have: VL = 2.63 (0.555/2.63) * 3.69 * [tex]e^{-0.555*1.68/2.63}[/tex]

The value of induced emf 1.68 seconds after the circuit is closed is approximately equal to 0.522 V.

To learn about induced emf here:

https://brainly.com/question/13744192

#SPJ11

A baseball bat traveling rightward strikes a ball when both are moving at 30.1 m/s (relative to the ground) toward each other. The bat and ball are in contact for 1.10 ms, after which the ball travels rightward at a speed of 42.5 m/s relative to the ground. The mass of the bat and the ball are 850 g and 145 g, respectively. Define rightward as the positive direction.
Calculate the impulse given to the ball by the bat
Calculate the impulse given to the bat by the ball.
What average force ⃗ avg does the bat exert on the ball?

Answers

The impulse given to the ball by the bat is equal to the change in momentum of the ball during their interaction. The impulse can be calculated by subtracting the initial momentum of the ball from its final momentum.

The initial momentum of the ball is given by the product of its mass (m_ball) and initial velocity (v_initial_ball): p_initial_ball = m_ball * v_initial_ball. The final momentum of the ball is given by: p_final_ball = m_ball * v_final_ball.

To calculate the impulse, we can use the equation: Impulse = p_final_ball - p_initial_ball. Substituting the values, we have Impulse = (m_ball * v_final_ball) - (m_ball * v_initial_ball).

Similarly, we can calculate the impulse given to the bat by the ball using the same principle of conservation of momentum. The impulse given to the bat can be obtained by subtracting the initial momentum of the bat from its final momentum.

The average force (F_avg) exerted by the bat on the ball can be calculated using the equation: F_avg = Impulse / Δt, where Δt is the time of contact between the bat and the ball.

Learn more about momentum here;

https://brainly.com/question/18798405

#SPJ11

Alex Morgan is going to kick a soccer ball into the goal during the 2019 World Cup. Alex kicks the ball straight at the goal from 50.0 m away. Assume the goalie is busy faking an injury and doesn't try to stop the ball, and ignore air resistance. A. (5 points) Suppose that Alex kicks the ball with an initial speed of 19.7 m/s. What angle would she have to kick the ball so that it just makes it to the goal without touching the ground? B. (4 points) The top of the goal is 2.44 m off of the ground. Suppose instead that she kicked the ball at an initial angle of 40.0°. With what initial speed should she kick the ball in order to hit the top of the goal?

Answers

A. Alex Morgan would need to kick the ball at an angle of approximately 29.5 degrees.

B. Alex Morgan should kick the ball with an initial speed of approximately 16.5 m/s to hit the top of the goal when kicked at an angle of 40.0 degrees.

A. To determine the angle at which Alex Morgan needs to kick the ball so that it just reaches the goal without touching the ground, we can use the equations of projectile motion. We'll assume the goal is at the same height as the ground.

To find the angle of projection (θ), we can use the equation for the horizontal range of a projectile:

Range = [tex](v0^2 * sin(2\theta)) / g[/tex]

Since we want the ball to just reach the goal without touching the ground, the range should be equal to the initial distance from the goal:

50.0 m = [tex](19.7^2 * sin(2\theta)) / 9.8[/tex]

Now, we can solve this equation to find the angle θ:

sin(2θ) =[tex](50.0 m * 9.8) / (19.7 m/s)^2[/tex]

sin(2θ) = 0.4987

2θ = arcsin(0.4987)

θ ≈ 29.5 degrees

B. Now, let's determine the initial speed at which Alex Morgan should kick the ball at an angle of 40.0 degrees to hit the top of the goal.

Given:

Initial angle of projection (θ) = 40.0 degrees

Height of the top of the goal (y) = 2.44 m

Acceleration due to gravity (g) = [tex]9.8 m/s^2[/tex]

To find the initial speed (v0), we can use the equation for the maximum height of a projectile:

Maximum height =[tex](v0^2 * sin^2(\theta)) / (2g)[/tex]

Since we want the ball to reach the top of the goal, the maximum height should be equal to the height of the top of the goal:

2.44 m =[tex](v0^2 * sin^2(40.0 degrees)) / (2 * 9.8 m/s^2)[/tex]

Now, we can solve this equation to find the initial speed v0:

[tex]v0^2 = (2 * 9.8 m/s^2 * 2.44 m) / sin^2(40.0 degrees)[/tex]

v0 ≈ 16.5 m/s

To know more about initial speed, here

brainly.com/question/28060745

#SPJ4

Consider an object of mass 100kg. Ignoring the gravitational effects due to any other celestial bodies, work out the following:
(a) What is the work required to move the object from the surface of the earth to a height where it will not feel the effect of the earth’s gravity?
(b) If the object is stationary on the surface of the earth with the full moon directly above it, find the measured weight of the object.
(c) If the object were to float in space between the earth and the moon, find the distance from the earth where the object would experience zero gravitational force on it.

Answers

(a) The work required to move the object from the surface of the earth to a height where it will not feel the effect of the earth's gravity can be calculated using the formula for gravitational potential energy.

(b) If the object is stationary on the surface of the earth with the full moon directly above it, the measured weight of the object can be determined by considering the gravitational force between the object and the earth.

(c) To find the distance from the earth where the object would experience zero gravitational force, we can set the gravitational forces due to the earth and the moon equal to each other and solve for the distance.

(a) The work required to move the object from the surface of the earth to a height where it will not feel the effect of the earth's gravity is equal to the change in gravitational potential energy. This can be calculated using the formula W = ΔPE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height.

(b) The measured weight of the object on the surface of the earth with the full moon directly above it can be found by considering the gravitational force between the object and the earth. The weight of the object is equal to the force of gravity acting on it, which can be calculated using the formula W = mg, where m is the mass of the object and g is the acceleration due to gravity.

(c) To find the distance from the earth where the object would experience zero gravitational force, we can set the gravitational forces due to the earth and the moon equal to each other. By equating the gravitational forces, we can solve for the distance where the gravitational forces cancel out, resulting in zero net force on the object.

Learn more about gravitational potential energy here:

https://brainly.com/question/29766408

#SPJ11

A closely wound, circular coil with radius 2.30 cmcm has 780 turns.
A) What must the current in the coil be if the magnetic field at the center of the coil is 0.0750 TT?
B) At what distance xx from the center of the coil, on the axis of the coil, is the magnetic field half its value at the center?

Answers

A.the current in the coil should be 0.0295 A.B.B.Approximately, the current should be 0.0656 A (3 s.f) from the center of the coil.

A. The expression that relates the magnetic field strength (B) at the center of a circular coil is given by;B = μ₀ × n × I,where;μ₀ = 4π × 10^⁻7 Tm/In = 780 turnsr = 2.30 cmI = current.We are given that B = 0.0750 T.Substituting the known values gives;0.0750 = 4π × 10^⁻7 × 780 × IIsolating for I gives;I = 0.0750/(4π × 10^⁻7 × 780)I = 0.0295 A.Therefore, the current in the coil should be 0.0295 A.B.Halfway the distance from the center to the edge of a current-carrying loop, the magnetic field.

(B) is approximately 0.7 times its value at the center of the loop.The magnetic field strength at the center of the loop is given by;B = μ₀ × n × IFrom the above expression;B/μ₀ = n × IWe can obtain the value of n as;n = N/L.

Where;N = number of turns in the loop.L = circumference of the loop.Circumference of a circle is given by;C = 2πr,where;r = 2.30 cmL = 2π × 2.30L = 14.44 cm.Substituting the known values gives;n = 780/14.44n = 53.94 turns/cm.Therefore;B/μ₀ = n × IB/μ₀ = (53.94/cm) × II = (B/μ₀)/(53.94/cm)

The magnetic field half its value at the center, B/2 = 0.5 × B, hence;I = (0.5 × B)/((53.94/cm) × μ₀)I = (0.5 × 0.0750 T)/((53.94/cm) × 4π × 10^⁻7 Tm/I)I = 0.0656 A.Approximately, the current should be 0.0656 A (3 s.f) from the center of the coil.

Learn more about magnetic field here,

https://brainly.com/question/14411049

#SPJ11

Consider the signal r(t) = w(t) sin (27 ft) where f = 100 kHz and t is in units of seconds. (a) (5 points) For each of the following choices of w(t), explain whether or not it would make x (t) a narrowband signal. Justify your answer for each of the four choices; no marks awarded without valid justification. 1. w(t) = cos(2πt) 2. w(t) = cos(2πt) + sin(275t) 3. w(t) = cos(2π(f/2)t) where f is as above (100 kHz) 4. w(t) = cos(2π ft) where f is as above (100 kHz) (b) (5 points) The signal x(t), which henceforth is assumed to be narrowband, passes through an all- pass system with delays as follows: 3 ms group delay and 5 ms phase delay at 1 Hz; 4 ms group delay and 4 ms phase delay at 5 Hz; 5 ms group delay and 3 ms phase delay at 50 kHz; and 1 ms group delay and 2 ms phase delay at 100 kHz. What can we deduce about the output? Write down as best you can what the output y(t) will equal. Justify your answer; no marks awarded without valid justification. (c) (5 points) Assume r(t) is narrowband, and you have an ideal filter (with a single pass region and a single stop region and a sharp transition region) which passes w(t) but blocks sin(27 ft). (Specifically, if w(t) goes into the filter then w(t) comes out, while if sin (27 ft) goes in then 0 comes out. Moreover, the transition region is far from the frequency regions occupied by both w(t) and sin(27 ft).) What would the output of the filter be if x(t) were fed into it? Justify your answer; no marks awarded without valid justification.

Answers

(a) The signal r(t) can be written as:

1. r(t) = cos(2πt) sin (2π ft). This signal is narrowband.

2. r(t) = [cos(2πt) + sin(275t)] sin (2π ft). This signal is not narrowband.

3. r(t) = cos(2π(f/2)t) sin (2π ft). This signal is narrowband.

4. r(t) = cos(2π ft) sin (2π ft). This signal is not narrowband.

(b) The all-pass system is a linear system that does not change the amplitude spectrum of the input signal. It only changes the phase spectrum of the signal.

(c) only w(t) will be passed through the filter.

(a) The signal r(t) can be written as:

r(t) = w(t) sin (2π ft)

where f = 100 kHz and t is in seconds.

1. w(t) = cos(2πt)We can write r(t) as:

r(t) = cos(2πt) sin (2π ft)

This signal is narrowband.

2. w(t) = cos(2πt) + sin(275t)

We can write r(t) as:

r(t) = [cos(2πt) + sin(275t)] sin (2π ft)

This signal is not narrowband. It has a frequency component at 275 Hz which is much larger than the bandwidth of the signal which is 200 Hz.

3. w(t) = cos(2π(f/2)t) where f = 100 kHz

We can write r(t) as:

r(t) = cos(2π(f/2)t) sin (2π ft)

This signal is narrowband.

4. w(t) = cos(2π ft) where f = 100 kHz

We can write r(t) as:

r(t) = cos(2π ft) sin (2π ft)

This signal is not narrowband. It has a frequency component at 2f = 200 kHz which is much larger than the bandwidth of the signal which is 200 Hz.

(b) The all-pass system is a linear system that does not change the amplitude spectrum of the input signal. It only changes the phase spectrum of the signal.

Therefore, if the input signal is narrowband, then the output signal will also be narrowband. Moreover, the group delay of the system is the derivative of the phase with respect to frequency.

Therefore, the group delay of the system is smaller at higher frequencies. This means that the high-frequency components of the signal will be delayed less than the low-frequency components.

The phase delay of the system is also smaller at higher frequencies. This means that the high-frequency components of the signal will be shifted less than the low-frequency components.

Therefore, the output signal will be a delayed and phase-shifted version of the input signal. The exact form of the output signal cannot be determined without knowing the form of the input signal.

(c) The filter passes w(t) and blocks sin(2π ft). Therefore, the output of the filter will be w(t) if x(t) = r(t) is fed into it.

This is because r(t) is of the form w(t) sin(2π ft), and the filter blocks sin(2π ft).

Therefore, only w(t) will be passed through the filter.

Learn more about narrowband here:

https://brainly.com/question/29920900

#SPJ11

A point charge q=-4.3 nC is located at the origin. Find the magnitude of the electric field at the field point x=9 mm, y=3.2 mm.

Answers

Solving this equation gives us |E| = 3.89 × 10⁴ N/C. Hence, the magnitude of the electric field at the field point x = 9 mm, y = 3.2 mm is 3.89 × 10⁴ N/C.

We know that the electric field intensity is the force experienced by a unit positive charge placed at a point in an electric field. So, the magnitude of the electric field at a point P at a distance r from a point charge q is given by,|E| = kq/r²

Where,k = Coulomb's constant = 9 × 10⁹ Nm²/C²q = charge of the point chargerr = distance of the field point from the point chargeSo, the distance of the field point from the point charge is given by,r² = x² + y² = (9 mm)² + (3.2 mm)²r² = 81 + 10.24 = 91.24 mm²r = √(91.24) = 9.55 mmNow, substituting the given values in the formula for electric field,|E| = k|q|/r² = (9 × 10⁹) × (4.3 × 10⁻⁹) / (9.55 × 10⁻³)²|E| = 3.89 × 10⁴ N/C

Therefore, the magnitude of the electric field at the field point x = 9 mm, y = 3.2 mm is 3.89 × 10⁴ N/C. This can be written in 150 words as follows:The magnitude of the electric field at the field point x = 9 mm, y = 3.2 mm can be determined by the formula |E| = k|q|/r². Using the values provided in the question,

we can first find the distance of the field point from the point charge which is given by r² = x² + y². Substituting the values of x and y in this equation, we get r = √(91.24) = 9.55 mm. Next, we can substitute the values of k, q and r in the formula for electric field intensity which is given by |E| = kq/r². Substituting the given values, we get |E| = (9 × 10⁹) × (4.3 × 10⁻⁹) / (9.55 × 10⁻³)².

Solving this equation gives us |E| = 3.89 × 10⁴ N/C. Hence, the magnitude of the electric field at the field point x = 9 mm, y = 3.2 mm is 3.89 × 10⁴ N/C.

to know more about magnitude

https://brainly.com/question/31805774

#SPJ11

Why is the mass of the Sun less than when it was formed? Mass has been lost through the solar wind. Mass has been converted to escaping radiant energy and neutrinos. The premise of the question is false since matter cannot be created or destroyed. More than one answer above. Question 18 What discovery suggested the Universe had a beginning in time? The discovery of Hubble Deep Field by the Hubble Space Telescope. The discovery of cosmic expansion by Hubble. The discovery of spiral nebulae by Hubble. Question 19 How is the interstellar medium enriched by metals over cosmic time? Massive stars expel heavy element enriched matter into space when they become supernovae. Stars like the Sun explode and enrich the interstellar medium. Metals are formed on dust grains in dense molecular clouds. More than one of the above.

Answers

There are two ways the mass of the sun is lost. They are: Mass has been lost through the solar wind. Mass has been converted to escaping radiant energy and neutrinos.

The sun is constantly emitting mass through the solar wind. The solar wind is a stream of charged particles, mainly protons and electrons, that are continuously blown into space from the surface of the Sun. Hence the mass is less now than when it was formed. Thus, the mass of the Sun is less than when it was formed due to the loss of mass through the solar wind and conversion to escaping radiant energy and neutrinos.

Discovery suggested the Universe had a beginning in time:

Hubble discovered the cosmic expansion. Hubble found that every galaxy outside our Milky Way is moving away from us, with more distant galaxies moving away faster. This discovery showed that the universe is expanding and its space is getting larger with time. This expansion implied that the universe had a beginning in time as it could not have expanded infinitely into the past and that the universe was not static, which contradicted with the popular theory at the time. Therefore, the discovery of cosmic expansion by Hubble suggested that the Universe had a beginning in time.

Massive stars expel heavy element enriched matter into space when they become supernovae. Therefore, the interstellar medium is enriched by metals over cosmic time. The metals are then incorporated into other stars and planets.

To know more about solar wind visit:

brainly.com/question/16524443

#SPJ11

A proton moving perpendicular to a magnetic field of 9.80 μT follows a circular path of radius 4.95 cm. What is the proton's speed? in m/s.
(uses above question) If the magnetic field is pointed into the page and the proton is moving to the left when it enters the region of the magnetic field, the proton goes in what direction as viewed from above?
Clockwise
Counterclockwise
Down the page
Up the page

Answers

The speed of the proton is approximately 2.29 x 10^6 m/s.

Regarding the direction of motion as viewed from above, the proton will move counterclockwise in the circular path.

To calculate the proton's speed, we can use the formula for the centripetal force acting on a charged particle moving in a magnetic field:

F = qvB

where F is the centripetal force, q is the charge of the proton, v is its velocity, and B is the magnetic field strength.

In this case, the centripetal force is provided by the magnetic force, so we can equate the two:

qvB = mv²/r

where m is the mass of the proton and r is the radius of the circular path.

Solving for v, we get:

v = (qB*r) / m

The values:

q = charge of a proton = 1.6 x 10^-19 C (Coulombs)

B = magnetic field strength = 9.80 μT = 9.80 x 10^-6 T (Tesla)

r = radius of the circular path = 4.95 cm = 4.95 x 10^-2 m

m = mass of a proton = 1.67 x 10^-27 kg

Substituting the values into the formula, we can calculate the speed:

v = (1.6 x 10^-19 C * 9.80 x 10^-6 T * 4.95 x 10^-2 m) / (1.67 x 10^-27 kg) = 2.29 x 10^6 m/s.

To know more about proton

https://brainly.com/question/29248303

#SPJ11

Tell us on what basis we select following for
measuring flow rates
a) Pitot Tube
b) Orifice meter
c) Venturi meter
d) Rotameter

Answers

The selection of the following devices for measuring flow rates are based on the following factors: a) Pitot Tube: The Pitot tube is a device used to measure the flow velocity of fluids. It is used to measure the velocity of air or other gases flowing in a pipe.

The selection of a pitot tube is based on the following factors: Pipe size Accuracy of measurement Required flow range Fluid properties b) Orifice meter: An orifice meter is a device used to measure the flow rate of a fluid. The selection of an orifice meter is based on the following factors: Pipe size Accuracy of measurement Fluid properties Cost. c) Venturi meter: A Venturi meter is a device used to measure the flow rate of a fluid. The selection of a Venturi meter is based on the following factors: Pipe size Accuracy of measurement Fluid properties Cost. d) Rotameter: A rotameter is a device used to measure the flow rate of a fluid. The selection of a rotameter is based on the following factors: Pipe size. Accuracy of measurement Fluid properties Cost.

To know more about pressure visit:

https://brainly.com/question/31555867

#SPJ11

A ball is thrown at a wall with a velocity of 12 m/s and rebounds with a velocity of 8 m/s. The ball was in contact with the wall for 35 ms. Determine: the mass of the ball, if the change in momentum was 7.2 kgm/s (3) the average force exerted on the ball (

Answers

The mass of the ball is 0.36 kg and the average force exerted on the ball is approximately 205.71 Newtons.

To determine the mass of the ball, we can use the formula for change in momentum:

Change in momentum = mass * change in velocity

Given that the change in momentum is 7.2 kgm/s and the change in velocity is from 12 m/s to -8 m/s (taking the negative sign for the opposite direction), we can write the equation as:

7.2 kgm/s = mass * (8 m/s - (-12 m/s))

Simplifying the equation:

7.2 kgm/s = mass * 20 m/s

Dividing both sides by 20 m/s:

mass = 7.2 kgm/s / 20 m/s

mass = 0.36 kg

Therefore, the mass of the ball is 0.36 kg.

To determine the average force exerted on the ball, we can use the formula:

Average force = Change in momentum / Time

Given that the change in momentum is 7.2 kgm/s and the time of contact is 35 ms (converting to seconds: 35 ms = 0.035 s), we can calculate the average force:

Average force = 7.2 kgm/s / 0.035 s

Average force ≈ 205.71 N

Therefore, the average force exerted on the ball is approximately 205.71 Newtons.

Learn more about momentum

https://brainly.com/question/20998223

#SPJ11

An LC circuit is comprised of a capacitor with 10.0 mF and initial charge of 1.5 C, and inductor with L = 6.2 H.
a) What is the angular frequency of oscillation?
b) Assuming a phase of 0, what is the current at t = 3.0 s?
c) Now assume the circuit has resistance 45Ω. What is the angular frequency of the oscillation of charge?
d) What is the current in this circuit after 3.0 s assuming a phase of zero? Compare this to your answer to part b).
e) If this circuit instead had an AC voltage source with a maximum voltage of 40V and a frequency of 120Hz, what would the impedance of the circuit be? What is the RMS voltage?

Answers

The angular frequency of oscillation is  5.06 rad/s. the current at t = 3.0 s is 0.71 A. The angular frequency of the oscillation of charge is 5.05 rad/s. the current in this circuit after 3.0 s assuming a phase of zero is 0.68 A. The impedance of the circuit is 45.09Ω and the RMS voltage is 28.28V.

a) The angular frequency (ω) of the LC circuit can be calculated using the formula ω = 1 / sqrt(LC). Plugging in the values,[tex]\omega = 1 / \sqrt((6.2 H)(10.0 mF)) = 5.06 rad/s[/tex].

b) To find the current (I) at t = 3.0 s with a phase of 0, we can use the equation[tex]I = (Q_0 / C) * cos(\omega t)[/tex]. Substituting the given values, [tex]I = (1.5 C / 10.0 mF) * cos(5.06 rad/s * 3.0 s) = 0.71 A[/tex].

c) Considering the circuit has a resistance of 45Ω, the angular frequency (ω') of the oscillation of charge can be determined using the formula [tex]\omega' = \sqrt((1 / LC) - (R^2 / (4L^2)))[/tex]. Substituting the given values, [tex]\pmega' = \sqrt((1 / ((10.0 mF)(6.2 H))) - ((45[/tex]Ω[tex])^2 / (4(6.2 H)^2))) = 5.05 rad/s.[/tex]

d) The current in the circuit after 3.0 s with a phase of zero can be calculated using the same equation as part b. Substituting the values, I' = (1.5 C / 10.0 mF) * cos(5.05 rad/s * 3.0 s) = 0.68 A. This can be compared to the previous answer to assess the impact of resistance.

e) If the circuit had an AC voltage source with a maximum voltage of 40V and a frequency of 120Hz, the impedance (Z) can be determined using the formula [tex]Z = \sqrt(R^2 + (\omega L - 1 / (\omega C))^2)[/tex]. Substituting the given values, [tex]Z = \sqrt((45[/tex]Ω[tex])^2[/tex] [tex]+ ((2\pi(120Hz)(6.2 H)) - 1 / (2\pi(120Hz)(10.0 mF)))^2) = 45.09[/tex]Ω. The RMS voltage can be calculated as [tex]V_{RMS} = (V_{max}) / \sqrt(2) = 40V / \sqrt(2) = 28.28V.[/tex]

Learn more about angular frequency here:

https://brainly.com/question/32670038

#SPJ11

A 2002 lamp and a 30 02 lamp are connected in series with a 10 V battery. Calculate the following: the voltage drop across the 20 2 lamp Question 20 1 pts A 2002 lamp and a 30 02 lamp are connected in series with a 10 V battery. Calculate the following: the voltage drop across the 300 lamp

Answers

The voltage drop across the 20 2 lamp is approximately 3.32 V, and the voltage drop across the 300 lamp is approximately 6.68 V.

When two lamps are connected in series, they share the same current. The voltage drop across the two lamps is proportional to their resistance, which can be calculated using Ohm's Law. We can use the equation:V = IR,where V is voltage, I is current, and R is resistance. Given that the two lamps are connected in series with a 10 V battery, we know that the voltage drop across the two lamps will be 10 V. We can use this information to find the resistance of the two lamps combined.

Using Ohm's Law:10 V = I(R1 + R2),where R1 and R2 are the resistances of the two lamps, and I is the current flowing through the circuit. Since the two lamps share the same current, we can say that I is the same for both lamps. Therefore, we can rewrite the equation as:10 V = I(R1 + R2)orI = 10 / (R1 + R2)To find the voltage drop across each lamp, we can use the equation:V = IR. For the 2002 lamp, we know that R1 = 2002 Ω. For the 30 02 lamp, we know that R2 = 3002 Ω. We can substitute these values into the equation:V1 = IR1V1 = (10 / (2002 + 3002)) * 2002V1 ≈ 3.32 VFor the 300 lamp, we can use the same equation:V2 = IR2V2 = (10 / (2002 + 3002)) * 3002V2 ≈ 6.68 VTherefore, the voltage drop across the 20 2 lamp is approximately 3.32 V, and the voltage drop across the 300 lamp is approximately 6.68 V.

Learn more about Equation here,What is equation? Define equation

https://brainly.com/question/29174899

#SPJ11

Two metal plates with only air between them are separated by 148 cm One of the plates is at a potential of 327 volts and the other plate is at a potential of 341 volts. What is the magnitude of the electric field between the plates in volts/meter? (Enter answer as a positive integer Do not include unit in answer

Answers

The magnitude of the electric field between the plates is approximately 9 V/m.

To calculate the magnitude of the electric field between the plates, we can use the formula:

Electric field (E) = Potential difference (V) / Distance (d).

Given that the potential difference between the plates is 341 V - 327 V = 14 V, and the distance between the plates is 148 cm = 1.48 m, we can substitute these values into the formula:

E = 14 V / 1.48 m.

Calculating the value, we find:

E ≈ 9.459 V/m.

Therefore, the magnitude of the electric field between the plates is approximately 9 V/m.

Learn more about magnitude here:

https://brainly.com/question/30033702

#SPJ11

A capacitor consists of two metal surfaces separated by an electrical insulator with no electrically conductive path through it. Why does a current flow in a resistor capacitor circuit when the switch is closed? Voltage breakdown occurs at the time the switch is closed. Current flow causes the insulator to become electrically active. Charge builds up on each side of the capacitor creating a potential difference across the capacitor. Holes on one side of the capacitor attract the electrons on the other side of the capacitor. Question 2 4 pts How many microseconds does it take for a 0.1μF charged capacitor to discharge to 2 V when connected with a 100Ω resistor and charged to 3 V ? Question 3 4 pts How many microseconds does it take for a 0.1μF charged capacitor to discharge to 1 V when connected with a 100Ω resistor and charged to 3 V ? Question 4 4 pts How does the initial value of the current in an RC circuit depend on the resistance? There is no relationship. It is inversely proportional. It is exponentially related. It is directly related. It is an inverse exponential relationship. Question 5 4 pts How does the initial value of the current in an RC circuit depend on the capacitance? It is exponentially related. It is an inverse exponential relationship. There is no relationship. It is directly related. It is inversely related

Answers

When the switch in a resistor-capacitor (RC) circuit is closed, a current flows because charge builds up on each side of the capacitor, creating a potential difference across it.

This allows electrons to move through the circuit, attracted by the presence of opposite charges on either side of the capacitor.

In an RC circuit, the capacitor stores electrical energy in the form of charge on its plates. When the switch is closed, the capacitor begins to discharge through the resistor. The potential difference across the capacitor gradually decreases over time as the charge dissipates.

For Question 2 and Question 3, the time it takes for a charged capacitor to discharge to a specific voltage can be determined using the RC time constant [tex](\( \tau \))[/tex] given by the formula:

[tex]\[ \tau = RC \][/tex]

where R is the resistance and C is the capacitance. The time t it takes for the capacitor to discharge to a certain voltage can be calculated using the formula:

[tex]\[ t = \tau \cdot \ln\left(\frac{V_i}{V_f}\right) \][/tex]

where [tex]\( V_i \)[/tex] is the initial voltage across the capacitor and [tex]\( V_f \)[/tex] is the final voltage.

For Question 4, the initial value of the current in an RC circuit depends on the resistance. According to Ohm's Law [tex](\( I = \frac{V}{R} \)),[/tex] the initial current[tex](\( I_0 \))[/tex]is directly related to the resistance R.

For Question 5, the initial value of the current in an RC circuit does not depend on the capacitance. The initial current is determined by the voltage across the resistor and the resistance, but it is not influenced by the capacitance of the capacitor.

It is important to note that these answers assume ideal conditions and neglect factors such as internal resistance and non-ideal behavior of the components in the circuit.

Learn more about voltage here:

https://brainly.com/question/32419504

#SPJ11

Other Questions
Figure 1 shows the internal circuitry for a charger prototype. You, the development engineer, are required to do an electrical analysis of the circuit by hand to assess the operation of the charger on different loads. The two output terminals of this linear device are across the resistor. R. You decide to reduce the complex circuit to an equivalent circuit for easier analysis. i) Find the Thevenin equivalent circuit for the network shown in Figure 1, looking into the circuit from the load terminals AB. (9 marks) A R1 ww 40 R2 ww 30 20 V R4 60 RL B Figure 1 ii) Determine the maximum power that can be transferred to the load from the circuit. (4 marks) 10A R330 A 250/50-V, 50 Hz single phase transformer takes a no-load current of 2 A at a power factor of 0 3 51 When delivering a rated load current of 100 A at a lagging power factor of 08, calculate the primary current 52 Also draw the phasor diagram to illustrate the answer what is the point-slope form of a line with slope -4 that contains the point (2,-8) BIG 5 PERSONALITY TRAITS WITH THE TRAINER ON 'ETHICS AND VALUEING THE CO-WORKERS'.BIG 5 PERSONALITY TRAITS WITH THE EMPLOYEE DEALING WITH 'CONFLICT RESOLUTION MANAGER'. notor exerts on the wheel. la) Maw lonq does the wheel take to reach its final operating speed of 1.270 revimin? ib) Throuch how many revotubloss does it tum while accelerating? rev Map the following sequence to the hash table of size 13, with hash function h(x)= x+3% Table size 67,12,89,129,32,11, 8,43,19 If collision occurs avoid that collision using 1) Linear Probing 2) Quadratic probing 3) Double Hashing (h1(x)=x+3% Table size, h2(x)=(2x+5)% Table size how do you think engineering can be used to address one or two of the UN's sustainable Development Goals a) A four-bit binary number is represented as A 3A 2A 1A 0, where A 3,A 2, A 1, and A 0represent the individual bits and A 0is equal to the LSB. Design a logic circuit that will produce a HIGH output with the condition of: i) the decimal number is greater than 1 and less than 8 . ii) the decimal number greater than 13. [15 Marks] b) Design Q2(a) using 2-input NAND logic gate. [5 Marks] c) Design Q2(a) using 2-input NOR logic gate. [5 Marks] The _________ must also be aligned with the organization's core values: the principles that are important as it carries out its mission and vision.QUESTION 9Why are value statements important for a firm?They demonstrate to their employees and other stakeholders the important principles that the organization lives by.They show customers and potential customers what the firm stands for.Some customers may choose a company based on how its values resonate with theirs.All the above.QUESTION 10An organization should seriously consider its values statement when developing its strategies and goals. If a potential strategy conflicts with one of its values, they need to drop or ________that strategy to ensure the company conforms to their corporate values as they move their organization forward. Ski resorts cost of making snow are in the millions of dollars for equipment alone. Showmaking involves spraying droplets of water into the air, causing them to freeze and come down as snow. Making snow can cost more than $2.000 per hour! Snowmaking accounts for 40-50% of the operating budget for many ski resorts As a budget analyst, you have been tasked with coming up with a snowmaking budget for next year. How will you approach this task? What are some of the things you need to consider? Where will you look for ideas? NO LINKS!! URGENT HELP PLEASE!!Find the value of x In 1998, astronomers observed that extremely distant supernova explosions were dimmer than expected. Based on this and other evidence, most astronomers believeA.) the expansion rate of the universe has been getting faster and faster, causing those supernovae to be further away than expected.B.) the speed of light has changed (accelerated) in the billions of years since those supernovae occured.C.) the supernovae of the distant past were different, indicating the early universe had different physical laws than it does currently.D.) the universe was at least twice as big as previously thought and methods of determining distances were unreliable. Which should be removed to let the crops grow LIFE COACHING CLASS:300 WORDS PLEASE:MAKE IT SOUND NORMAL( YOUR OWN WORDS)Search Internet resources and directories to find a coach that you think you'd enjoy working with as a client or a colleague. Share the URL here as well as the WHY behind your decision. _______is/are the factors affecting the fatigue strength of asteel member connectiona) no. cylcles for each stress rangeb) temperature of steel in servicec) environmentd) all Max Function Suppose the max function for a list didn't exist. Define a function that returns the maximum value in a list of numbers. Suppose that an individual has a utility functions given by: U(X,Y)=3X 2+Y 2Suppose also that the individual has an income of $1500, the price of X is $8 per unit, and the price of Y is $18 per unit. What is the utility maximizing Quantity of X ? At 20c the value of PV for O2 in arbitary unit may be approximated by the equation PV = 1,07425 -0.752x10-30 storitas ant drotolar +0.150 x 10-5p2 to di cix) crostar where, Pis in atm. coyeulate the fugacity of O2 at 20c and 100 atm pressure . Part 1: Construct an NPDA for each of the following languages: 1. {a"b": n0} 2. {we {a,b}* : w=w } (NOTE: This is the set of ALL palindromes, both even and odd length.) 3. {a"b": n>m} DEVELOP projects entail a substantial effort focused on the creation of science communication materials (technical report, poster, presentation, and optional video) to share with project partners. Please describe your interest in gaining science communication skills. *