Answer:
oxygen-16 is a stable isotope of oxygen, having 8 neutrons and 8 protons in its nucleus. It has a mass of 15. u
Help I need to finish this in 10 minutes!
Answer:
this is a animal cell..I hope you received this on time
5. Given the following unbalanced equation: N20(g) + O2(g) → NO2(g)
Answer:
2 N2O(g) + 3 O2(g) --> 4 NO2(g)
Explanation:
this is the chemical reaction balanced, if that was ur question.
20. A compound's empirical formula is C5H5O If the molecular mass of the compound is
162.2g, what is the molecular formula? NO LINKS PLEASE:)!
Answer:
Just use a text book.. So that you get the concept
Hence, [tex]C_{20}H_{20}O_4[/tex] is the molecular formula of a compound's empirical formula is [tex]C_5H_5O[/tex].
What is an empirical formula?The empirical formula is the chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the actual numbers or arrangement of atoms.
Divide the molar mass of the compound by the empirical formula mass. The result should be a whole number or very close to a whole number. Multiply all the subscripts in the empirical formula by the whole number
The molar mass of the empirical formula compound [tex]C_5H_5O[/tex] is 46.06844 g/mol.
The molecular mass of the compound is 162.2g given.
162.2g ÷ 46.06844
3.520848546 =4
[tex]C_{20}H_{20}O_4[/tex] is the molecular formula.
Learn more about the empirical formula here:
https://brainly.com/question/14044066
#SPJ2
34.1 g sodium nitrate is dissolved in water to
make 816 g of solution.
What is the percent sodium nitrate in the
solution?
1. 4.36117%
2. 4.17892%
3. 100%
4. 0.0117892%
Answer:
2.4.17892
Explanation:
34.1/816×100=4.17892
Plz help ASAP
What is the molarity of a 0.6 L solution that contains 50.0 grams of sodium hydroxide(NaOH)?
A) 2.1 M
B) 2.9 M
C) 3.3 M
Answer: A 2.1
Explanation:
What do the observations for changes to volume and pressure show you about the
relationship between the volume and pressure of a gas? Explain using the data! Does
this demonstration support Boyle's Law or not?
(Hint: pressure is not being measured in this video, but think what would happen to a
balloon if it was squeezed or compressed. Would it get larger or smaller?)
Answer: The given demonstration does not support Boyle's Law.
Explanation:
According to Boyle's law, at constant temperature the pressure of an ideal gas is inversely proportional to the volume of gas.
[tex]P \propto \frac{1}{V}[/tex]
Therefore, an increase in volume of gas will lead to a decrease in pressure and vice-versa.
Now, according to the given data of volumes there is occurring an increase on moving from final volume 1 to final volume 3. This means that pressure is decreasing.
As a result, if a balloon was squeezed or compressed then it would get smaller. But in the given demonstration pressure is not given.
Thus, we can conclude that the given demonstration does not support Boyle's Law.
What is the ratio between the numbers 30 and 90
70.8 g of CO is exposed 20.4 g of Hy and a reaction takes place.
CO + 2H2 - CH3OH
1. How many grams of methyl hydroxide (CH3OH) is produced?
2. What is the limiting reactant?
3. How much of the excess reactant is left unused?
literally what does any of this mean
Answer:
1. 80.9 g of CH₃OH
2. CO
3. 5.14moles
Explanation:
The reaction is:
CO + 2H₂ → CH₃OH
First place, we determine the moles of each reactant.
70.8 g . 1mol/ 28g = 2.53 moles of CO
20.4 g . 1mol / 2g = 10.2 moles of H₂
There is too much hydrogen, so the limiting reactant might be the carbon monoxide.
2 moles of H₂ react to 1 mol of CO
Then, 10.2 moles of H₂ may react to (10.2 . 1) /2 = 5.1 moles
We don't have enough CO, so it's ok that CO is the limiting. (We have 2.53 moles, we need 5.1 moles)
In the other hand, hydrogen is the excess reactant.
1 mol of CO react to 2 moles of hydrogen
2.53 moles may react to (2.53 . 2) /1 =5.06 moles
We have 10.2 moles, and we need 5.06 moles. Then (10.2 - 5.06) = 5.14 moles remains after the reaction goes complete.
Now that we know the limiting reactant, we can determine the grams of produced methanol. Ratio is 1:1
1 mol of CO produces 1 mol of CH₃OH
2.53 moles of CO must produce 2.53 moles of CH₃OH
We convert moles to mass: 2.53 mol . 32 g/mol = 80.9 g
Phenylephrine is a nasal decongestant and is the active ingredient in Sudafed, which contains phenylephrine hydrochloride (PEHCl).
a. True
b. False
Answer:
True
Explanation:
It is TRUE that Phenylephrine is a nasal decongestant and is the active ingredient in Sudafed, which contains phenylephrine hydrochloride (PEHCl).
Phenylephrine is considered a prescription formula that is used in the production of Sudafed. Due to its direct-acting sympathomimetic amine property, it is used as a significant ingredient in the formation of Sudafed, a drug usually prescribed for nasal decongestion from regular cold, upper respiratory allergies, hay fever, etc.
Drawings/ diagram of polyatomic ions (structural formula)
PLEASE HELP I NEED IT
GIVING 100 points
PLEASE IT MAKE FAIR I NEED IMAGES OF IT
Polyatomic ions are ions made up of more than one atom.
What are Atoms?
Atoms are the smallest particles of matter that make up all objects. They are composed of protons, neutrons, and electrons. Protons and neutrons make up the nucleus of the atom, while electrons orbit around the nucleus. Atoms are the basic units of matter and are the building blocks of all living and nonliving things.
Polyatomic ions are ions that consist of two or more atoms covalently bonded together and carrying a net electric charge. Examples of polyatomic ions include nitrate (NO3−), sulfate (SO42−), phosphate (PO43−), and carbonate (CO32−).
To know more about Atoms,
https://brainly.com/question/16666188
#SPJ1
(b) C.H.(g) + O2(g)
CO2(g) + H2O(g) balance ?
The complete question is: [tex]CH_{4}(g) + O_{2}(g) \rightarrow CO_{2}(g) + H_{2}O(g)[/tex] balance?
Answer: [tex]CH_{4}(g) + 2O_{2}(g) \rightarrow CO_{2}(g) + 2H_{2}O(g)[/tex] is a balanced equation.
Explanation:
A chemical equation which contains same number of atoms on both reactant and product side is called a balanced chemical equation.
For example, [tex]CH_{4}(g) + O_{2}(g) \rightarrow CO_{2}(g) + H_{2}O(g)[/tex]
Here, number of atoms on reactant side are as follows.
C = 1H = 4O = 4Number of atoms on product side are as follows.
C = 1H = 2O = 3To balance this equation multiply [tex]O_{2}[/tex] by 2 on reactant side and multiply [tex]H_{2}O[/tex] by 2 on product side. Hence, the equation can be re-written as follows.
[tex]CH_{4}(g) + 2O_{2} \rightleftharpoons CO_{2}(g) + 2H_{2}O(g)[/tex]
Here, number of atoms on reactant side are as follows.
C = 1H = 4O = 4Number of atoms on product side are as follows.
C = 1H = 4O = 4Since, there are same number of atoms on both reactant and product side. So, this equation is a balanced equation.
Thus, we can conclude that [tex]CH_{4}(g) + 2O_{2}(g) \rightarrow CO_{2}(g) + 2H_{2}O(g)[/tex] is a balanced equation.
the maximum allowed concentrations of chloride in municipal drinking water supply in 250 ppm cl. when the supply of water exceeds this limit it often has a distinctive salty taste. what is the concentration in molarity?
The allowed concentration of Cl in water is 250 ppm. Then the equivalent concentration in molarity is 0.007 molar.
What is molarity ?Molarity is a common term used to express the concentration of a solution. It is the ratio of the number of moles of solute to the volume of solution in liters. Molarity is a temperature dependent measurement.
Parts per million is another term of concentration have the formula as written below:
ppm = ws/W × 10⁶
Where, ws is the weight of solute and W be the weight of solution in grams.
1 molar = 35500 ppm
therefore, 250 ppm = 250 ppm × 1M /35500 ppm = 0.007 M.
Hence, the molarity of the salt solution will with the maximum allowed concentration will be 0.007 M.
Find more on molarity:
https://brainly.com/question/8732513
#SPJ1
Nitrogen is important for _____. plant growth weather and temperature animals to breathe photosynthesis
Answer:
building amino acids in proteins
Explanation:
Compute the concentration (count per volume) of vacancies in copper at room temperature if the lattice parameter of FCC copper is 0.3615 nm at room temperature (25oC, 298 K), and the activation energy to form a single vacancy is 0.9 eV. Use 8.617x10-5 eV/(atom-K), exactly, as Boltzmann's Constant.
Note: You could look up the density and atomic weight of copper to compute room temperature atom concentration you need for this problem.
Answer:
5.1044844 x 10^7/cm^3 = 5E7
Explanation:
The atomic weight and density (at 25 ° C) for copper are 63.5 g/mol or 0.0635 kg/mol and 8,960 kg/m^3
First lets find the value of N, number of atomic sites per cubic meter for copper, from its atomic weight Acu, its density, and Avogadro’s number NA
N = NA x ρ / Acu = 6.023 x 10^23 x 8,960 kg/m^3 / 0.0635 kg/mol = 8.4985953 x 10^28 atoms / m3
Temperature dependency can be given as :
Arrhenius equation
Nv = N e^(-EA/KT)
N = no. of atoms initially
Ev = activation energy
Nv = 8.4985953 x 10^28 atoms / m^3 exp^-(0.9ev/atom /8.617x10-5 eV/(atom-K) x 298 K
Nv = 5.1044844 x 10^13 /m3
vacancies per cm^3 = 5.1044844 x 10^7/cm^3 = 5E7
In order to prepare a sample for absorbance readings, a vitamin tablet containing 25 mg of iron was dissolved in 6M HCl, quantitatively transferred into a 100 mL volumetric flask and diluted to the 100 mL mark with DI water. Then 20 mL and 17 mL of this solution were pipetted into separate 100 mL volumetric flasks and each of these was brought up to 100 mL volume by diluting with DI water to the mark.
Required:
Calculate concentration of iron in mg/L in each of these flasks
Answer:
C₂ = 50 mg/L
C₃ = 42.5 mg/L
Explanation:
To do this, we just need to use the following expression:
C₁V₁ = C₂V₂ (1)
Where:
C₁: Original concentration of the Iron solution (mg/L)
V₁: aliquot of the iron solution (mL or L)
C₂: Concentration of the iron after beind dilluted (mg/L)
V₂: Volume of the flask that's being used.
Using the above expression, we just solve for C₂:
C₂ = C₁V₁ / V₂ (2)
We have the required volumes, but we do not have the concentration of the iron solution (C₁). To determine this, we use the initial flask of 100 mL and the mass of the iron:
C₁ = 25 mg / 0.1 L = 250 mg/L
With this value, we can replace in (2) to get the concentration on each flask.
Flask 1:
We have an aliquot of 20 mL, and it was dilluted to 100 mL, the concentration would be:
C₂ = 250 mg/L * (20/100)
C₂ = 50 mg/LFlask 2:
We have an aliquot of 17 mL dilluted to 100 mL so:
C₃ = 250 * (17/100)
C₃ = 42.5 mg/LHope this helps
The concentration of iron in mg/L in each of the two flasks is 50 mg/l and 42.5 mg/L respectively.
The initial concentration of iron in the sample is obtained as follows:
A vitamin tablet containing 25 mg of iron is dissolved in 6M HCl and then made up to 100 mL in a 100 mL volumetric flask with DI water.
Concentration of iron in the solution = 25 mg/ 100 mL
Converting to mg/L; 1 L = 1000 mL, then 100 mL = 1000 * 1 L/ 1000 mL = 0.1 L
Concentration of iron in the solution in mg/L = 25 mg / 0.1 L = 250 mg/L
Then 20 mL and 17 mL of this solution were pipetted into separate 100 mL volumetric flasks and each of these was brought up to 100 mL volume by diluting with DI water to the mark.
Using the dilution formula C₁V₁ = C₂V₂ to determine the concentration of iron in each of these flasks:
C₁ = initial concentration; V₁ = initial volume
C₂ = final concentration; V₂ = final volume
Flask 1:
C₁ = 250 mg/L, V₁ = 20 mL, C₂ = ?, V₂ = 100 mL
C₂ = C₁V₁ / V₂
C₂ = 250 * 20 / 100
C₂ = 50 mg/L
Flask 2:
C₁ = 250 mg/L, V₁ = 17 mL, C₂ = ?, V₂ = 100 mL
C₂ = C₁V₁ / V₂
C₂ = 250 * 17 / 100
C₂ = 42.5 mg/L
Therefore, the concentration of iron in mg/L in each of the two flasks is 50 mg/l and 42.5 mg/L respectively.
Learn more: https://brainly.com/question/6103588
If 467.08 grams of Oz are reacted, how many grams of C6H5CH3 will also be reacted?
In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.
What are some uses for toluene?Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.
For the balanced equation
2C6H5CH3 + 3O2 → 7CO2 + 4H2O
We required three steps
1.) Convert mass of O2 to mol of O2
mole = mass / molar mass
2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.
3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)
= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm
= 4034.95 gm. of C6H5CH3
To know more about Toluene visit :
https://brainly.com/question/6181289
#SPJ1
how do i balance the first chemical reaction above?? plz plz help
Answer:
2K +F₂→ 2KF
Explanation:
When we balance an equation, we are trying to ensure that the number of atoms of each element is the same on both sides of the arrow.
On the left side of the arrow, there is 1 K atom and 2 F atoms. On the right, there is 1 K and 1 F atom.
Since the number of K atoms is currently balanced, balance the number of F atoms.
K +F₂→ 2KF
Now, that the number of F atoms is balanced on both sides, check if the number of K atoms are balanced.
Left
K atoms: 1
F atoms: 2
Right
K atoms: 2
F atoms: 2
The number of K atoms is not balanced.
2K +F₂→ 2KF
Left
K atoms: 2
F atoms: 2
Right
K atoms: 2
F atoms: 2
The equation is now balanced.
Select the correct answer
What is the noble gas configuration for silicon?
OA [Ne] 3s^2 3p^1
OB. [Ar] 4s^1
OC [Kr]5s^1
OD. [Ne] 3s^2 3p^2
Answer:
D
Explanation:
Silicon, element number 14 is the fourth element in the third period in the periodic table. Its electronic configuration is 1s^2 2s^2 2p^6 3s^2 3p^2.
The elemental symbol of the previous noble gas preceding the atom is replaced by the arrangement of the remaining electrons to form a noble gas configuration of an atom.
So for Silicon, we substitute [Ne] 1s^2 2s^2 2p^6 and the noble gas configuration can now be [Ne] 3s^2 3p^2.
Pls help due tommorow
Answer:
.
Explanation:
a. 2, 2
b. 2, 2
c. 2, 3, 2
d. 1, 5, 3, 4
Just make sure there is an equal amount of each ELEMENT on each side of the reaction. Starting with, O, H, C, then other elements is a good method too
What is the molecular weight of (NH4)2SO4
The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.
Calculation of molecular weightsThe molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.
[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.
Molar weight of N is 14 g/molMolar weight of H is 1 g/molMolar weight of S is 32 g/molMolar weight of O is 16 g/molThus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)
= 132 g/mol
In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.
More on molecular weights can be found here: https://brainly.com/question/14507491
#SPJ1
I NEED HELP MY QUESTION IS "which of the following is a structural adaptation used to help animals move"
A: lungs
B: fur
C: wings
D: gills
Answer:
wings
Explanation:
this is an example of movement because it allows birds to fly in the air
What is the mass of phosphorus in a 63 kg person?
The mass of phosphorus in a 63 kg person would be 0.63 kg or 630 grams.
Percentage of phosphorus in humansAccording to several research findings, the percentage of phosphorus in the human body is about 1%. This means that the weight of an average human is about 1% phosphorus.
Using the above information, the mass of phosphorus in a 63 kg person can be estimated as follows:
1/100 x 63 = 0.63 kg
Since 1 kg = 1000 grams
Thus, 0.63 kg = 0.63 x 1000
= 630 grams
In other words, the mass of phosphorus in a 63 kg person would be 0.63 kg or 630 grams.
More on phosphorus can be found here: https://brainly.com/question/4622631
#SPJ1
Pls help I need a good grade
Answer:
Option 2
Explanation:
explain how dna which is 6 feet long, can be stored in the nucleus of a tiny human cell.
Answer:
Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging.
Explanation:
Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging. For DNA to function, it can't be crammed into the nucleus like a ball of string. Instead, it is combined with proteins and organized into a precise, compact structure, a dense string-like fiber called chromatin.
(hope this helps can i plz have brainlist :D hehe)
HELP ME PLS
type an actual answer insted of saying I will help you
Answer:
develops,blossoms are synonyms
How is the rock in the deep mantle similar to the rock in the parts of the mantle nearest to the surface? How are they different?
They are distinct Similarity: Compared to crustal rocks, mantle rocks have higher concentrations of magnesium and iron. The deep mantle's rocks are under extreme pressure and heat.
A mantle is what?Earth's interior is made up primarily of the mantle, which is solid. Between the thin crust at the surface of the planet and its dense, extremely hot core is the mantle. A staggering 84% of the volume of the Earth is made up of the mantle, which is around 2,900 kilometers 1,802 miles thick.
The mantle layer is how thick?The thickest layer on Earth measures just under 3,000 kilometers 1,865 miles. The beginning is only 18.6 miles 30 kilometers below the surface. It is thick, heated, and semi-solid like caramel candy, mostly made of iron, magnesium, and silicon. It circulates, much like the layer beneath it.
To know more about mantle visit:
https://brainly.com/question/11096614
#SPJ1
Rank the following fibers on the degree to which a dye will bind to the fabric and resist fading.
rank the following fibers on the degree to which a dye will bind
Answer:
polymer mear least receptive to dye
,
Which fuels are non-renewable
Answer:
fossil fuels
Explanation:
Well I had some topics on this stuff last quarter in science and from what I can remember it should be fossil fuels I think that fossil fuels are technically renewable but they are considered non-renewable since they are either in small supplies, are hard to obtain or take a long time to form.
Please someone help me!
I need this done ASAP *URGENT*
I Need this done before Thursday or Friday because Friday is my last day of school so please finish this today!
Best answer gets BRAINLIEST
PLEASE HURRY AND ANSWER ALL QUESTIONS CORRECTLY
NO LINKS OR ANSWER REPORTED
What’s the difference worksheet
Atoms,molecules,elements and compounds
PLEASE PLEASE PLEASE PLEASE PLEASEEEEEEE ANSWER THIS I only have TWO days of school left! And I need this done quickly
sorry needed the points
URGENT PLEASE HELP
1) The following balanced chemical equations are for based on the combustions of various fuels. Calculate the heats of combustion for each reaction
a. C2H5OH(l) + 3O2(g) à 2CO2(g) + 3H2O(g)
b. 2C4H10(g) + 13O2(g) à 8CO2(g) + 10H2O(g)
c. C3H8(g) + 5O2(g) à 3CO2(g) + 4H2O(g)
2) Express the heats of combustion from the above reactions as energy changes per mole of fuel combusted. State the reason why energy changes are often expressed per mole of reactant.
3) An Electric Generator burns gasoline to produce electricity. The balanced equation is below:
2C8H18(l) + 25O2(g) à 16CO2(g) + 18H2O(g)
a. Calculate the energy change for the burning of gasoline.
b. If the generator produces 2000kJ of electrical energy for every mole of gasoline combusted calculate the efficiency of the generator.
Answer:
Explanation:
1) The following balanced chemical equations are for based on the combustions of various fuels. Calculate the heats of combustion for each reaction a. C₂H₂OH + ...