As many as _____ neurons throughout the body are involved in the control of behavior

Answer:

Due to interia of motion

(b)

Explanation:

Energy levels farther from the nucleus represent higher energies. Therefore, in order for the electrons to reach these levels, they must absorb additional energies first before they can make the jump.

[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]

[tex]\\ \sf\longmapsto Force=Pressure(Area)[/tex]

[tex]\\ \sf\longmapsto Force=200(0.2)[/tex]

[tex]\\ \sf\longmapsto Force=40N[/tex]

Answer:

don't know what class are you which subject is this

Answer:hola puto

Explanation:cabroné

Explanation:

the answer is in picture

Explanation:

Time= Distance÷Velocity

Time= 1800÷90

Time= 20 hr

20×60= 1200 min

Answer:

Wagon weight 366.41314(9.81) = 3,594.5129 = 3590 N

Load weight 349.9245(9.81) = 3,432.75982 = 3430 N

Explanation:

Let's assume the surface and the applied force are horizontal.

At constant motion, the friction force must balance the applied force

(from F = ma)

Ff = 77.3

μΝ = 77.3

μmg = 77.3

m = 77.3 / (0.011(9.81))

m = 716.3376... kg

Let M be the mass of the wagon

M + 0.955M = 716.3376

M(1.955) = 716.3376

M = 366.41314...kg

0.955 M = 349.9245... kg

round to the three significant digits of the question numerals.

Un proyectil se define como cualquier objeto que traza una trayectoria parabólica. Los parámetros importantes en el movimiento de proyectiles son; Tiempo de vuelo, rango y altura máxima.

a) 1 segundo

b) 1,25 m

c) 10 m

Deje que el tiempo de vuelo sea T

T = 2usinθ / g

u = velocidad inicial

g = aceleración debida a la gravedad

θ = ángulo

T = 2 * 10 m / s * sin (30) / 10

T = 1 segundo

Sea la altura máxima H

H = u ^ 2 sin ^ 2 θ / 2g

H = (10) ^ 2 (sin30) ^ 2/2 * 10

Alto = 1,25 m

Sea el rango R

R = u ^ 2sin 2θ / g

R = (10) ^ 2 sin 2 (30) / 10

R = 8.66 m

https://brainly.com/question/11261462

a) El tiempo que tarda el proyectil en llegar al piso es:

[tex]t_{vuelo}=1\: s[/tex]  

b) La máxima altura alcanzada por el proyectil es:

[tex]y_{max}=1.25\: m[/tex]  

c) La máxima distancia alcanzada por el proyectil es:

[tex]x_{max}=8.66\: m[/tex]

a)

Para calcular el tiempo que le toma al proyectil llegar al piso, se puede usar la siguiente ecuación de tiro parabólico.

[tex]y=y_{i}+v_{iy}t-0.5gt^{2}[/tex] (1)

Donde:

Recordemos que la componente de la velocidad incial (v(i)=10 m/s) en el eje y esta dada por:

[tex]v_{iy}=v_{i}sin(30)[/tex]

[tex]v_{iy}=10sin(30)[/tex]

Sabemos que y(i) = 0 y ademas haciendo que y = 0, sabremos el tiempo total de vuelo. De la ecuación (1):

[tex]0=0+10sin(30)t-0.5(10)t^{2}[/tex]

Despejando t.

[tex]10sin(30)=0.5(10)t[/tex]

[tex]t=\frac{10sin(30)}{5}[/tex]  

El tiempo de vuelo sera:

[tex]t_{vuelo}=1\: s[/tex]  

b)

Para calcular la máxima altura, usamos la siguiente ecuación.

[tex]v_{fy}^{2}=v_{iy}^{2}-2gy[/tex]

Si hacemos que veocidad final en y v(fy) sea 0, encontraremos la máxima altura.

[tex]0=v_{iy}^{2}-2gy_{max}[/tex]

[tex]0=(v_{i}sin(30))^{2}-2gy_{max}[/tex]

Despejamos y(max):

[tex]y_{max}=\frac{(v_{i}sin(30))^{2}}{2g}[/tex]

[tex]y_{max}=\frac{(10sin(30))^{2}}{2(10)}[/tex]  

La máxima altura alcanzada por el proyectil será:

[tex]y_{max}=1.25\: m[/tex]  

c)

Sabemo que la velocidad del proyectil en la dirección x es constante, por lo tanto, la ecuacion cinemática será:

[tex]x=vt[/tex]

La máxima distancia se determina con el tiempo de vuelo:

[tex]x_{max}=v_{ix}t_{vuelo}[/tex]

La componente de la velocidad en la direccion x es:

[tex]v_{ix}=v_{i}cos(30)[/tex]

Por lo tanto, el máximo desplazamiento será:

[tex]x_{max}=10cos(30)*1[/tex]

[tex]x_{max}=8.66\: m[/tex]

Puedes aprender mas sobre tiro parabólico en:

https://brainly.com/question/16993838

Answer:

The standard (metric) units that would be discussed at primary school would include: grams and kilograms, centimetres, metres and kilometres, millilitres and litres (though children also learn about imperial units in Year 5 maths).

Answer:

Standard units are commonly used units of measurement. For an example; grams and kilograms, centimetres.

Answer:

I believe it's A

Explanation:

........

Answer:

C) 3/2 I

Explanation:

Initial condition

I = m(2d)² + 2m(d²)

I = 4md² + 2md² = 6md²

swap masses

I' = 2m(2d)² + m(d²)

I' = 8md² + md² = 9md²

I'/I = 9md²/6md² = 3/2

I' = 3/2I

Answer:

2Kg

first you find the total mass of both the person und skateboard

f = m*a

30 = m* 0.5

m= 30/ 0.5

m= 60 kg

then you subtract the mass of the person from the total mass

m1 - m2

60 - 58

= 2 kg

Taking into account the Newton's second law, the mass of the skateboard is 2 kg.

Newton's Second Law establishes the relationship between the forces acting on an object and the acceleration it experiences. This law says that the acceleration that an object experiences when subjected to a net force (force applied to the body) is proportional to that force.

Mathematically, Newton's second law is expressed as:

F= m×a

where:

In this case, you know:

Replacing:

30 N= m× 0.5 m/s²

Solving:

m= 30 N÷0.5 m/s²

m= 60 kg

The mass of the sistem is the sum of the mass of the skateboard and the mass of the mass of your body:

Mass= mass of the skateboard + mass of your body

In this case:

60 kg= mass of the skateboard + 58 kg

Solving:

mass of the skateboard= 60 kg - 58 kg

mass of the skateboard= 2 kg

Finally, the mass of the skateboard is 2 kg.

Learn more about the Newton's second law:

Answer :

Population composition is the description of a,population according to characteristics such as age and sex . These data are often compared over time using population pyramids.

fundamental UNIT AND DERIVED UNIT

Explanation:

THERE ARE TWO TYPE OF UNIT

1 FUNDAMENTAL UNIT = THE UNIT OF PHYSICAL QUANTITY LIKE METRE SECOND ETC IS FUNDAMENTAL UNIT.

2 DERIVED UNIT=THE UNIT OF DERIVED PHYSICAL QUANTITY LIKE PASCAL ,NEWTON ETC IS DERIVED UNIT

Answer:

An object in a motion when it is continuously changing its position based on a reference point and observed by a person or a device.

Answer:

0.04569 W/m^2

Explanation:

I=150cos^2(89.0)

=0.04569W/m^2

Answer:what is your Question

Explanation:

Answer:

ोोञककतकषगकषषमषघ

Explanation:

zzjjjfkgkzgkggkkkammmmmmatAllzy##pglCsg

(B) 1.58×10³ V

Explanation:

If you divide the input voltage by the number of turns in the primary coil, the result will be equal to the output voltage divided by the number of turns in the secondary coil:

Ui/Np = Uo/Ns

83/250 = Uo/4750 multiply both sides by 4750

394250/250 = Uo

Uo = 1577 = 1.58×10³ V

Answer:

Successive resonances/harmonics are observed to occur at 129, 215 and 301 Hz (Note: 129 Hz is not necessarily the fundamental frequency). the speed of sound is 76 added to 129 is 215

The pitch of the sound is a major property where the frequency of sound occur by human ear within the range of human hearing.

It is higher than the frequency of the sound where the higher is its pitch and a lower frequency means a lower pitch.

The loudness of sound is another property which can be determined by amplitude of the sound is a measure of the magnitude of the maximum disturbance of sound.

The speed is another property can be detrained as  the sound waves which can travel through the medium is called the speed of sound and it is different for different mediums, travels fastest in solids.

For more details  sound, visit

brainly.com/question/1502894

#SPJ5

Answer:

Explanation:

ai. com=(67*0+179*1.25)/(179+67)=0.91m

ii. com=(67*2.5+179*1.25)/(179+67)=1.59m

b. 0.91=(67(2.5-d)+179(1.25-d))/(179+67)

   d=0.68m

c. 1.5=(67*-3+67*-4+179*v)/(67+67+179)

    v=5.24m/s

The answers to your question are ;

A) Location of the center of the mass of system when origin of coordinate system is

i) On the original location of man = 0.91 m

ii) On back end of boat = 1.59 m

B) The boat is displaced by = 0.68 m

C) speed of boat after their jump ( V ) = 5.24 m/s

Given data :

mass of man = 67 kg

mass of boat = 179 kg

length of boat = 2.5 m

assumptions : No friction/drag force

Solutions

A) determine location of center of mass

i) On the man's original location = 0

= ( mass of man * 0 + mass * 1.25 ) / ( mass of boat + mass of man)

=  ( 0 + 179 * 1.25 ) /  ( 179 + 67 )

= ( 0 + 223.75 ) / ( 246 ) = 0.9096  ≈ 0.91 m

ii) On the back end of the boat

= ( mass of man * length of boat + mass of boat * 1.25 ) / ( mass of boat + mass of man )

= (  67 * 2.5 + 179 * 1.25 ) / ( 179 + 67 )

= ( 167.5 + 223.75 ) / ( 246 ) = 1.590 m

B) By How much is the boat displaced ( d )

0.91 ( location of center of mass from man's original location )

0.91  = (  67 *  (2.5 - d) +  179 (  1.25 - d ) ) / ( 179 + 67 )

        = ( 67 * ( 2.5 - d ) + 223.75 - 179d )) / ( 246 )

∴ d ≈ 0.68 m

C) Determine speed of boat after the jump

Initial speed of boat = 1.5 m/s

hence speed after the jump ( v )

speed of first man = 3 m/s

speed of second man = 4 m/s

1.5 m/s = ( 67 * -3 + 67 * -4 + 179 * v ) / ( 67 + 67 + 179 )

           = ( - 201 + -268 + 179v ) / ( 313 )

∴ v ≈ 5.24 m/s

learn more at : https://brainly.com/question/21759698

Answer:

I believe it is True

Explanation:

Given

[tex]\vec F = (4xz+y^2)\,\vec\imath + 2xy\,\vec\jmath + 2x^2\,\vec k[/tex]

its curl would be

[tex]\nabla\times\vec F = \left(\dfrac{\partial(2xy)}{\partial z} - \dfrac{\partial(2x^2)}{\partial y}\right)\,\vec\imath - \left(\dfrac{\partial(4xz+y^2)}{\partial z} - \dfrac{\partial(2x^2)}{\partial x}\right)\,\vec\jmath + \left(\dfrac{\partial(4xz+y^2)}{\partial y} - \dfrac{\partial(2xy)}{\partial x}\right)\,\vec k[/tex]

which reduces to the zero vector. Since the curl is zero, and [tex]\vec F[/tex] doesn't have any singularities, [tex]\vec F[/tex] is indeed a gradient field.

To determine what it is a gradient of, we look for a scalar function f(x, y, z) such that [tex]\nabla f = \vec F[/tex]. This entails solving for f such that

[tex]\dfrac{\partial f}{\partial x} = 4xz+y^2 \\\\ \dfrac{\partial f}{\partial y} = 2xy \\\\ \dfrac{\partial f}{\partial z} = 2x^2[/tex]

Integrate both sides of the first equation with respect to x, which gives

[tex]f(x,y,z) = 2x^2z+xy^2 + g(y,z)[/tex]

Differentiate both sides of this with respect to y :

[tex]\dfrac{\partial f}{\partial y} = 2xy = 2xy+\dfrac{\partial g}{\partial y} \\\\ \implies \dfrac{\partial g}{\partial y} = 0 \implies g(y,z) = h(z)[/tex]

Differentiate f with respect to z :

[tex]\dfrac{\partial f}{\partial z} = 2x^2 = 2x^2 + \dfrac{\mathrm dh}{\mathrm dz} \\\\ \implies \dfrac{\mathrm dh}{\mathrm dz} = 0\implies h(z) = C[/tex]

So it turns out that [tex]\vec F[/tex] is the gradient of

[tex]f(x,y,z) = 2x^2z+xy^2+C[/tex]

Teniendo en cuenta la definición de media, mediana y moda:

La media (también llamada promedio o media aritmética) de un conjunto de datos es una medida de posición central cuyo valor se obtiene al dividir la suma de todos los números entre la cantidad de ellos. Entonces, en este caso, el promedio de las lecturas obtenidas se calcula como:

[tex]Promedio=\frac{5+1+3+3+6+2+6+4+5+2+1+2+5+3+2+6+1+4+4}{19}[/tex]

Resolviendo:

Promedio= 3,42

El promedio de las lecturas obtenidas es 3,42.

Por otro lado, la moda de un conjunto de números es el número que aparece más a menudo dentro del grupo de datos.

En este caso, podes observar que la cantidad de veces que aparece cada número es:

Debido a que el 2 es el número con mayor cantidad de repeticiones, la tirada que más se repite es 2.

Por último, la mediana es valor que se encuentra en la mitad justa entre los valores máximo y mínimo de los datos con los que se está trabajando; es decir, que al ordenar los número de menor a mayor, éste se encuentra justamente en medio de los valores.

En este caso, ordenando de menor a mayor las lecturas del dado:

1,1,1,2,2,2,2,3,3,3,4,4,4,5,5,5,6,6,6

se observa que el valor el mayor valor intermedio de todas las lecturas es 3.

Aprende más con estos ejemplos:

We know

[tex]\boxed{\sf K.E=\dfrac{1}{2}mv^2}[/tex]

For Rotational motion

[tex]\boxed{\sf v=r\omega}[/tex].

Putting value

[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}m(r\omega)^2[/tex]

[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}mr^2\omega^2[/tex]

[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}m\left(\dfrac{R_o}{2}\right)^2v_o^2[/tex]

[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{4}mv_o^2[/tex]

Let v be the object's volume. The object displaces 0.4v cm³ of water, which, at a density of about 0.997 g/cm³, has a weight of

b = (0.000997 kg/cm³) (0.4 v cm³) g ≈ 0.000391v N

(and b is also the magnitude of the buoyant force). Then the net force on the object while it's floating in water is

∑ F = b - mg = 0

so that b = mg, where mg is the object's weight. This weight never changes, so the object feels the same buoyant force in each liquid.

(a) In methanol, we have

b = 0.000391v N = (0.00079 kg/cm³) (pv cm³) g

where p is the fraction of the object's volume that is submerged. Solving for p gives

p = (0.000391 N) / ((0.00079 kg/cm³) g) ≈ 0.0505 ≈ 5.05%

(b) In carbon tetrachloride, we have

b = 0.000391v N = (0.00158 kg/cm³) (pv cm³) g

==>   p ≈ 0.0253 ≈ 2.53%

Answer:

gravitational force

Explanation:

since they seem like they are falling, gravity usually pulls them down

i think its gravitational force