Based on reference table F describe the solubility of silver iodide in water

Rhombic sulfur and monoclinic sulfur are the two primary allotropes of sulfur.

Allotropes are various versions of the same element that can exist in various crystal shapes or physical states. An element's several allotropes each have different physical and chemical characteristics. For instance, carbon can exist in a variety of allotropes, each with a unique set of properties and applications, such as diamond, graphite, and fullerene.

The most prevalent type of sulfur is rhombic sulfur, which is yellow in hue. It is made up of S8 rings that have been puckered into a chair-like conformation. Rhombic sulfur is insoluble in water and stable at temperatures lower than 96°C. Insecticides, fertilizers, and sulfuric acid are all made with it.

Compared to rhombic sulfur, monoclinic sulfur is less frequent and denser. Although it has golden crystals as well, they resemble needles. Monoclinic sulfur can dissolve in some solvents, such as carbon disulfide, and is stable above 96°C. Both the vulcanization of rubber and the creation of gunpowder use it.

The 58 molecules that make up both types of sulfur are the same, but their crystal shapes and physical characteristics are different. Other allotropes of sulfur, like amorphous sulfur and plastic sulfur, which have different structures and characteristics from rhombic and monoclinic sulfur, can also occur.

To know more about allotropes, visit:

brainly.com/question/13058829

#SPJ1

When there is an overpressure condition, operators may be required to take various steps, such as the following:

The following are some of the qualifications that are required for an operator:

Operators may also be required to follow established procedures for dealing with overpressure conditions in order to maintain safety and prevent equipment damage.

Learn more about Operators: https://brainly.com/question/20628271

#SPJ11

Answer:

[Kr] 4d^10 5s

Explanation:

Krypton is the nearest noble gas build structure off of that

The aluminum ground state electron configuration is 1s²2s²2p⁶3s²3p¹.

The electron configuration of aluminum will therefore be  1s²2s²2p⁶3s²3p¹. Scientists can easily write and communicate how electrons are arranged around an atom's nucleus using the configuration notation. It is now simpler to comprehend and predict how atoms will interact to form chemical bonds as a result.

The Aufbau Principle, Pauli-exclusion Principle, and Hund's Rule are the three key rules that we adhere to. By removing electrons from the outermost p orbital first, then the s orbital, and finally the d orbitals, the electronic configuration of cations is determined (if any more electrons need to be removed).

To know more about electron configuration visit:

brainly.com/question/29757010

#SPJ6

The three carbon alcohol that forms the backbone of a triglyceride is called glycerol.

Glycerol is a type of alcohol that is found in many fats and oils. It is a clear, odorless, viscous liquid that is sweet-tasting and non-toxic. Glycerol is a versatile molecule that is used in a variety of industrial and pharmaceutical applications.

The structure of a triglyceride consists of three fatty acids that are linked to a glycerol molecule. The fatty acids are long-chain hydrocarbons that have a carboxylic acid group (-COOH) at one end. The carboxylic acid group can react with the hydroxyl group (-OH) on the glycerol molecule to form an ester linkage (-COO-). The resulting molecule is a triglyceride. Triglycerides are a type of lipid that are important for energy storage in the body. They are found in adipose tissue and are broken down into fatty acids and glycerol when the body needs to use stored energy.

Learn more about Glycerol here: https://brainly.com/question/23503113

#SPJ11

The compound with atoms that have an incomplete octet is BF3.The correct answer is a.

An octet is a set of eight electrons in the outermost shell of an atom. Noble gases have an octet of electrons in their outermost shells, making them stable. Other elements aim to reach this stable state by either losing or gaining electrons. When they do this, they form ions.

In some cases, however, elements may share electrons to achieve an octet. This is called covalent bonding. In a covalent bond, atoms share valence electrons to reach the stable octet configuration.BF3 is an example of a compound that has atoms with an incomplete octet.

In BF3, boron has only six electrons in its outermost shell. This means that it cannot form an octet on its own. However, by sharing three electrons with three fluorine atoms, boron is able to achieve a stable configuration, even if it does not have a complete octet.

In contrast, the other compounds listed in the question all have atoms that have a complete octet or an expanded octet. For example, CO and CO2 both have atoms with a complete octet. ICl5 and Cl2 both have atoms with an expanded octet. Only BF3 has atoms with an incomplete octet.

Learn more about covalent bonding here:

brainly.com/question/19382448

#SPJ11

The percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon and 53.3% oxygen.

Silicon dioxide is а chemicаl compound thаt is composed of silicon аnd oxygen аtoms. It is аlso known аs silicа аnd is а commonly occurring minerаl.

In order to find the percent composition of silicon dioxide, we need to find out the percentаge of eаch element in the compound. First, we must find the molаr mаss of [tex]SiO_{2}[/tex].

Molаr mаss of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) + (аtomic mаss of O x number of O аtoms)

= (28.0855 g/mol x 1) + (15.9994 g/mol x 2)

= 60.0855 g/mol

Then, we must find the mаss of silicon in one mole of [tex]SiO_{2}[/tex].

Mаss of silicon in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (28.0855 g/mol x 1) / 60.0855 g/mol

= 0.467 moles

Find the mаss of oxygen in one mole of [tex]SiO_{2}[/tex].

Mаss of oxygen in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of O x number of O аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (15.9994 g/mol x 2) / 60.0855 g/mol

= 0.533 moles

Find the percentаge of silicon in [tex]SiO_{2}[/tex].

Percent composition of silicon in [tex]SiO_{2}[/tex] = (mаss of silicon in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.467 moles / 1 mole) x 100

= 46.7%

Find the percentаge of oxygen in [tex]SiO_{2}[/tex].

Percent composition of oxygen in [tex]SiO_{2}[/tex] = (mаss of oxygen in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.533 moles / 1 mole) x 100

= 53.3%

Therefore, the percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon аnd 53.3% oxygen.

For more information about Silicon dioxide refers to the link: https://brainly.com/question/15412188

#SPJ11

The correct answers are

a) The balanced chemical equation is KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

b) Ni(OH)₂.

c) KOH is the limiting reactant

d)1.854 g Ni(OH)₂

e) Concentration of K⁺ and SO₄²⁻ ions in solution is: 0.05333M

(a) The balanced chemical equation for the reaction that occurs can be written as:

KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

(b) The precipitate that forms is Ni(OH)₂.

(c) To determine the limiting reactant, we need to calculate the number of moles of KOH and NiSO₄.

Number of moles of KOH = 0.200 mol/L × 0.100 L = 0.0200 mol

Number of moles of NiSO₄ = 0.150 mol/L × 0.200 L = 0.0300 mol

Since KOH and NiSO₄ react in a 1:1 molar ratio, KOH is the limiting reactant because it produces fewer moles of product than NiSO₄.

(d) To calculate the mass of Ni(OH)₂ precipitate formed, we first need to determine the number of moles of Ni(OH)₂ formed:

0.0200 mol KOH × (1 mol Ni(OH)2 / 1 mol KOH) = 0.0200 mol Ni(OH)₂

Therefore, the mass of Ni(OH)₂ formed can be calculated as:

0.0200 mol Ni(OH)2 × 92.71 g/mol = 1.854 g Ni(OH)₂

(e) The balanced chemical equation shows that K₂SO₄ and Ni(OH)₂ are the products of the reaction. To determine the concentration of each ion that remains in solution, we need to calculate the number of moles of each product formed.

Number of moles of K₂SO₄ = 0.0200 mol KOH × (1 mol K₂SO₄ / 1 mol KOH) = 0.0200 mol

Number of moles of Ni(OH)₂ = 0.0200 mol KOH × (1 mol Ni(OH)₂ / 1 mol KOH) = 0.0200 mol

Therefore, the concentration of K⁺ and SO₄²⁻ ions in solution is:

[K⁺] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

[SO₄²⁻ ] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

The concentration of Ni²⁺ ions in solution can be calculated by subtracting the number of moles of Ni(OH)₂ from the initial number of moles of NiSO₄:

Number of moles of Ni²⁺ = 0.0300 mol - 0.0200 mol = 0.0100 mol

[Ni2+] = 0.0100 mol / (0.100 L + 0.200 L) = 0.0267 M.

To learn more about  balanced chemical equation refer to:

brainly.com/question/28294176

#SPJ4

It is true that the allowable range for an objective function coefficient considers the original estimates for all the other coefficients when estimating the range for this particular coefficient.

Generally the range is determined by the degree of uncertainty in the data used to estimate the coefficients, as well as the level of risk that the decision-maker is willing to accept. Therefore, sometimes the range for an objective function coefficient does not necessarily depend on the accuracy of the other coefficients. For example, if the objective function is to maximize profit, then the allowable range for any coefficient would be the range of values that would result in the highest possible profit, regardless of other coefficient estimates.

To learn more about uncertainty click here https://brainly.com/question/30325893

#SPJ1

The edge length of a body-centered cubic (BCC) unit cell for the given alloy is 1.93 Å.

The edge length of a body-centered cubic (BCC) unit cell can be calculated using the following formula:

Edge length = (4/√3)a

Where a is the length of the edge of the unit cell. Here, Fe is the solvent, and V is the solute. The formula for a solid-solution alloy's density can be expressed as follows:

ρ = [M1ρ1 + M2ρ2]/[M1 + M2]

where M1 and M2 are the molecular weights of the solvent and solute atoms, respectively, and ρ1 and ρ2 are their densities. The molecular weight of the solvent Fe and the solute V are 55.85 and 50.94 g/mol, respectively. At room temperature, the densities of Fe and V are 7.86 g/cm³ and 6.0 g/cm³, respectively. We'll use the following equation to determine the density of the alloy:

ρ = [85(7.86) + 15(6.0)]/[85 + 15]

ρ = (668.1/100)

ρ = 6.68 g/cm³

Substituting these values in the formula for edge length of BCC unit cell, we get,

Edge length = (4/√3) × a6.68 = (4/√3) × a

We will then solve for a as follows:

a = (6.68 × √3)/4a = 1.93Å

Therefore, the edge length for the given alloy is 1.93 Å.

To learn more about "edge length", visit: https://brainly.com/question/16176175

#SPJ11

The overall reaction is: NO₂(g) + Cl₂(g) → 2ClNO₂(g), The intermediates in the mechanism are ClNO₂(g) and Cl(g), and  the predicted rate law for the overall reaction is  k[NO₂]²[Cl₂].

The overall reaction will be: NO₂(g) + Cl₂(g) → 2ClNO₂(g)

The intermediates in the mechanism are ClNO₂(g) and Cl(g).

To determine the predicted rate law, we need to write the rate expressions for each step of the mechanism:

Step 1: Rate1 = k₁[NO₂][Cl₂]

Step 2: Rate2 = k₂[NO₂][Cl]

Since the second step is fast and involves an intermediate, we can assume that the concentration of the intermediate ClNO₂ is in steady-state, which means that its rate of formation will be equal to its rate of consumption. Therefore:

Rate1 = Rate2

k1[NO₂][Cl₂] = k₂[NO₂][ClNO₂]

Solving for [ClNO₂], we get:

[ClNO₂] = (k₁/k₂)[Cl₂]

Substituting this expression into the rate expression for the first step, we get:

Rate1 = k₁[NO₂][(k₁/k₂)[Cl₂]] = (k₁²/k₂)[NO₂][Cl₂]

Therefore, predicted rate law for the overall reaction will be:

Rate = k[NO₂]²[Cl₂]

where k = k₁²/k₂.

To know more about predicted rate law here

https://brainly.com/question/30719759

#SPJ4

--The given question is incomplete, the complete question is

"Consider this two-step mechanism for a reaction: NO₂(g) + Cl₂(g) ? ClNO₂(g) + Cl(g) Slow NO₂(g) + Cl(g) ? ClNO₂(g) Fast a. What is the overall reaction? b. Identify the intermediates in the mechanism. c. What is the predicted rate law?"--

It would take 221 days for a sample of iridium-192 to decay to 10% of its original amount.

The half-life of iridium-192 is 73.83 days.

Now, the formula for calculating the time is given by;

ln(Nt/N0)=-λt

Where Nt is the number of radioactive atoms remaining after time t, N0 is the initial number of radioactive atoms, t is the half-life and λ is the decay constant.

Taking 10% of the initial amount of the radioactive substance which is the final amount of the substance and solving for t gives

ln(0.1) = -λt

Now substituting the value of half-life which is 73.83 days into the equation gives;

ln(0.1) = -ln(2)/73.83(t)= -ln(0.1) / ln(2) * 73.83t = 220.64 days (rounded to the nearest integer).

Thus, it would take 221 days for a sample of iridium-192 to decay to 10% of its original amount.

Learn more about half-life at: brainly.com/question/31191744

#SPJ11

Phenol is a weak acid because there is a lot of charge around the oxygen which tends to attract the hydrogen ion back again.

Generally a weak acid is defined as an acid that partially dissociate into it's ions in an aqueous solution. Basically phenol can donate a proton and behave as an acid. The phenoxide ion is formed by the donation of proton, and is stabilized due to delocalization of electrons.

Generally, oxygen is regarded as the most electronegative element in the ion and the delocalized electrons is usually drawn towards oxygen. Due to this attraction there will still be a lot of charge present around the oxygen which tends to attract the hydrogen ion back again and this is the reason why phenol is only a very weak acid.

Learn more about weak acid from the link given below.

https://brainly.com/question/22104949

#SPJ4

The reaction of 2-chloro-2-methylpropane with silver nitrate in ethanol proceeds at a faster rate than the reaction of 2-chlorobutane with silver nitrate in ethanol because 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane. The correct answer is option b) 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane.

This is because 2-chloro-2-methylpropane forms a tertiary carbocation, which is more stable due to the inductive effect and hyper conjugation. On the other hand, 2-chlorobutane forms a secondary carbocation, which is less stable. The higher stability of the carbocation in the case of 2-chloro-2-methylpropane leads to a faster reaction rate with silver nitrate in ethanol.

You can learn more about silver nitrate at: brainly.com/question/8071605

#SPJ11

The statement "Solubility is how much solute will dissolve in solvent" is true.

Solubility refers to the maximum amount of a substance (solute) that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance can be influenced by several factors such as temperature, pressure, and the chemical nature of the solute and solvent.

When the maximum amount of solute has been dissolved in the solvent, the solution is said to be saturated. If more solute is added to a saturated solution, it will not dissolve and will instead precipitate out of the solution.

To know more about precipitate, visit :

https://brainly.com/question/18109776

#SPJ1

There are 118 elements on the periodic table.

Answer:

No , No for both

niether of these reaction will take place as in First one Ag is less reactive then Na so It cannot displace it .. Same for Second reaction Mn Cannot displace Ca

The equilibrium pH of the solution will be approximately 9.72 when excess Mg(OH)₂ is added to pure water.

When excess Mg(OH)₂ is added to pure water, it will dissociate slightly to form Mg²⁺ and OH⁻ ions according to the following equation:

Mg(OH)₂ ⇌ Mg²⁺ + 2OH⁻

The Ksp for Mg(OH)₂ is given as 7.1 x 10⁻¹², which is the equilibrium constant for the dissociation of Mg(OH)₂ into Mg²⁺ and OH⁻ ions. The expression for Ksp is:

Ksp = [Mg²⁺][OH⁻]²

Since Mg(OH)₂ dissociates into one Mg²⁺ ion and two OH⁻ ions, we can rewrite the equation as:

Ksp = [Mg²⁺][OH⁻]² = 7.1 x 10⁻¹²

Since we are adding excess Mg(OH)₂ to pure water, the initial concentration of Mg²⁺ and OH⁻ ions can be considered negligible. Let x be the concentration of OH⁻ ions that will be produced upon dissociation of Mg(OH)₂. Then, the equilibrium concentration of Mg²⁺ ions will be equal to x, and the equilibrium concentration of OH⁻ ions will be equal to 2x.

Substituting these values into Ksp expression, we have:

Ksp = [Mg²⁺][OH⁻]² = (x)(2x)² = 4x³ = 7.1 x 10⁻¹²

Solving for x, we get:

x = 5.3 x 10⁻⁵ M

Therefore, the equilibrium concentration of OH⁻ ions in the solution will be 5.3 x 10⁻⁵ M. To calculate the pH of solution, we can use the relationship:

pH = 14 - pOH

pOH = -log[OH⁻] = -log(5.3 x 10⁻⁵) = 4.28

pH = 14 - 4.28

= 9.72

To know more about equilibrium here

https://brainly.com/question/30525486

#SPJ4

Answer:

2 hydrogen atoms

Explanation:

because the hydrogen atoms are two

The reactions that occur when this mixture is heated are [tex]MgSO_4 + 7H_2O[/tex] (heat) and  [tex]CoCl_2 + 6H_2O[/tex](heat).

It is given that the material used in some cracker tins that include a glass vial of drying material in the lid to keep the crackers crisp is a mixture magnesium sulfate and cobalt chloride indicators.

The indicator changes color from blue to pink when magnesium sulfate absorbs moisture. The reaction is as follows:

[tex]MgSO_4 . H_2O + 6H_2O--- > MgSO_4 . 7H_2O[/tex]

Similarly cobalt chloride absorbs moisture as:

[tex]CoCl_2 . 4H_2O + 2H_2O --- > CoCl_2 . 6H_2O[/tex]

When these substances are heated the following reaction takes place:

This reaction is an endothermic reaction that involves the removal of water molecules from magnesium sulfate, producing anhydrous magnesium sulfate and water vapor.

[tex]MgSO_4 . 7H_2O -- > MgSO_4 + 7H_2O (heat)[/tex]

It involves the removal of water molecules from cobalt chloride, producing anhydrous cobalt chloride and water vapor.

[tex]CoCl_2 . 4H_2O + 2H_2O -- > CoCl_2 + 6H_2O (heat)[/tex]

To learn more about magnesium sulfate click here https://brainly.com/question/12842749

#SPJ1

For a yield of SO₃ of 61.0%, the overall pressure at equilibrium must be 332 atm.

The given equilibrium reaction is 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) with equilibrium constant KP = 0.13 at 803°C.

Initially, 2.00 mol SO₂ and 2.00 mol O₂ are present in a flask. Let 'x' be the number of moles of SO₃ formed at equilibrium. Therefore, the number of moles of SO₂ and O₂consumed in the reaction is also 'x'.

According to the balanced equation, 2 moles of SO₂react with 1 mole of O₂ to form 2 moles of  SO₃. Thus, the number of moles of SO₃ formed is '2x'.

Using the equilibrium constant expression, we get:

KP = [SO₃]2 / [SO₂]2 [O₂]

Substituting the equilibrium concentrations in terms of 'x', we get:

0.13 = (2x / (2.00 - x))2 (2.00 - x - x)

Simplifying and solving for 'x', we get:

x = 0.958 mol

The number of moles of SO₃ formed at equilibrium is 2x = 1.92 mol.

To find the total pressure at equilibrium, we can use the ideal gas law:

PV = nRT

where P is the total pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming the volume and temperature remain constant, we can write:

P = ntotal RT / V

where ntotal is the total number of moles of gas present at equilibrium.

Initially, we have 2.00 mol SO₂ and 2.00 mol O₂, so the total number of moles of gas present initially is:

ntotal = 2.00 + 2.00 = 4.00 mol

At equilibrium, we have 0.958 mol SO₂, 0.958 mol O₂, and 1.92 mol SO₃. Therefore, the total number of moles of gas present at equilibrium is:

ntotal = 0.958 + 0.958 + 1.92 = 3.84 mol

Substituting the values in the equation for P, we get:

P = (3.84 mol) (0.0821 L atm mol-1 K-1) (1076 K) / (1.00 L) = 332 atm

Therefore, the total pressure at equilibrium must be 332 atm to have a 61.0% yield of SO₃.

To learn more about moles refer to:

brainly.com/question/26416088

#SPJ4

the volume of the solution is: 1.1035 L or 1103.5 mL.

The given is as follows:
a student creates a solution with a molarity of 1.55 m.
If the solute has a molar mass of 110 g/mol and
the solution contains 188 g of solute,
what is the volume of the solution?

Let's calculate the volume of the solution. The volume of the solution can be calculated using the formula:
moles of solute = mass of solute ÷ molar mass
molarity = moles of solute ÷ volume of solution

We need to calculate the volume of the solution.
Thus, rearranging the above formula, we get:
Volume of solution = Moles of solute ÷ Molarity

Calculate the number of moles of solute
Number of moles of solute = Mass of solute ÷ Molar mass= 188 g ÷ 110 g/mol= 1.7091 mol

Now, we can calculate the volume of the solution.
Volume of solution = Number of moles of solute ÷ Molarity= 1.7091 mol ÷ 1.55 mol/L≈ 1.1035 L or 1103.5 mL

To know more about "Molarity" refer here:

https://brainly.com/question/13601876#

#SPJ11

In nature, the structure of an object is often related to its function or properties because the shape of an object can affect how it interacts with other objects or substances.

This is true for molecules as well, where the arrangement of atoms and bonds can impact the molecule's chemical and physical properties.

For example, the shape of proteins is crucial to their function in biological systems. The three-dimensional structure of a protein determines its ability to interact with other molecules in the body, such as enzymes, hormones, or receptors. Even small changes in the protein's shape can have significant effects on its function, leading to diseases or disorders.

In summary, the shape of an object can have a significant impact on its function or properties, and this is true for molecules as well. Understanding the relationship between molecular shape and function is essential for many fields, including biochemistry, pharmacology, and materials science.

To know more about pharmacology, visit:

https://brainly.com/question/30308277

#SPJ1

The correct structure of the cyclic hemiacetal that forms under acidic conditions when 5-hydroxy-4-methylpentanal cyclizes is attached below.

In this structure, the aldehyde group (CHO) and the hydroxyl group (OH) on the same molecule have reacted to form a cyclic hemiacetal. The carbon atom in the aldehyde group has formed a bond with the oxygen atom in the hydroxyl group, resulting in a five-membered ring structure.

The hemiacetal group (-CH(OH)-) is attached to the second carbon atom in the chain, which is also methyl-substituted (H3C-) and located next to the oxygen atom in the ring.

Learn more on acidic conditions here: https://brainly.com/question/13592513

#SPJ1

To identify the limiting reactant in this reaction, we need to compare the amount of product that can be produced from each reactant. The balanced chemical equation for the reaction is:

Mg(OH)₂+ 2HCl → MgCl₂ + 2H₂O

The molar mass of Mg(OH)₂ is 58.32 g/mol, and the molar mass of HCl is 36.46 g/mol. We can use these values to calculate the number of moles of each reactant:

5.87 g Mg(OH)₂ / 58.32 g/mol = 0.1005 mol Mg(OH)₂

12.84 g HCl / 36.46 g/mol = 0.352 mol HCl

According to the stoichiometry of the balanced equation, 1 mole of Mg(OH)₂ reacts with 2 moles of HCl to form 1 mole of MgCl₂. Therefore, the amount of MgCl₂ that can be produced from each reactant is:

From Mg(OH)2: 0.1005 mol Mg(OH)₂ × 1 mol MgCl₂ / 1 mol Mg(OH)₂ = 0.1005 mol MgCl₂

From HCl: 0.352 mol HCl × 1 mol MgCl₂ / 2 mol HCl = 0.176 mol MgCl₂

Since Mg(OH)₂ produces less MgCl₂ compared to HCl, it is the limiting reactant, and HCl is in excess. Therefore, Mg(OH)₂ is the limiting reactant in this reaction.

To learn more about MgCl₂ refer to:

brainly.com/question/28145230

#SPJ4

Using Faraday's law, we can calculate the amount of time it would take to plate 8.96 g of nickel onto copper using a 2.0 V power supply with a 315 mA current flow and a 0.50 M nickel (ii) acetate solution. Faraday's law states that the amount of charge required to plate one mole of metal is equal to the current multiplied by the time.

In this case, we can calculate the time by dividing the total charge (8.96 g/63.55 g/mol = 0.14 mol) by the current (315 mA = 0.315 A). This gives us a total time of 0.45 minutes, or 27 seconds. This assumes a 100% current efficiency, which is often not the case due to the presence of side reactions in the plating solution. Therefore, it is likely that the actual time to plate 8.96 g of nickel will be longer than 27 seconds.

In conclusion, it would take 27 seconds to plate 8.96 g of nickel onto copper using a 2.0 V power supply with a 315 mA current flow and a 0.50 M nickel (ii) acetate solution, assuming 100% current efficiency. However, due to side reactions in the plating solution, the actual time may be longer.

Know more about Faraday's law here

https://brainly.com/question/1640558#

#SPJ11

The concentration of silver ion after the reaction of 300 mL of a .2 molar solution of AgNO3 with 100 mL of a .05 molar solution of CaCl2 has gone to completion is 0.15 molar.

The equation for the reaction is: 2AgNO3 + CaCl2 → 2AgCl + Ca(NO3)2.

The molar concentration of the AgNO3 solution is 0.2 molar. When 300 mL of this solution is added to 100 mL of a 0.05 molar solution of CaCl2, the moles of AgNO3 will be 0.6 and the moles of CaCl2 will be 0.05.

When the reaction goes to completion, 0.6 moles of AgNO3 will produce 0.6 moles of AgCl. Therefore, the concentration of silver ions will be 0.6/400 mL, or 0.15 molar.

Learn more about concentration: https://brainly.com/question/2201903

#SPJ11

The answer is 14.3 grams of H2O can be made.

Looking at the balanced chemical equation:

S + 6 HNO3 → H2SO4 + 6 NO2 + 2 H2O

We can see that 6 moles of HNO3 will produce 2 moles of H2O.

To calculate the number of moles of HmNO3 in 150.2 grams, we need to divide the mass by the molar mass:

150.2 g HNO3 x (1 mol HNO3 / 63.01 g HNO3) = 2.38 mol HNO3

Now we can use the mole ratio to find the number of moles of H2O produced:

2.38 mol HNO3 x (2 mol H2O / 6 mol HNO3) = 0.793 mol H2O

Finally, we can convert the number of moles of H2O to grams by multiplying by the molar mass:

0.793 mol H2O x 18.02 g/mol = 14.3 g H2O

Rounding to the nearest tenth, the answer is 14.3 grams of H2O can be made.

learn more about mass here

https://brainly.com/question/24191825

#SPJ1

Yes, it is necessary to know the exact volume of water used to dissolve the KHP.

Why is it necessary to know the exact volume of water used to dissolve the KHP?

It is necessary to know the exact volume of water used to dissolve KHP because the volume of water used affects the concentration of the solution, which in turn affects the accuracy of the results obtained. To accurately determine the concentration of a solution, it is important to know the amount of solute (in this case khp) dissolved in a given volume of solvent (water).Therefore, if the volume of water used to dissolve the khp is not known, the concentration of the resulting solution will be unknown as well. This can lead to inaccurate results and make it difficult to compare data with other experiments or measurements. It is important to use precise measurements and follow experimental procedures accurately to ensure reliable results.

To learn more about the KHP, visit here:

https://brainly.com/question/29576872

#SPJ11