Type the correct answer in the box. Use numerals instead of words. If necessary, use / for the fraction bar.
Find the area of pentagon ABCDE.
a (-3,-5)
b (-3,-2)
c (-2,2)
d (2,-2)
e (2,-5)
The area of pentagon ABCDE is ___ square units.

Answers

Answer 1

The area of pentagon ABCDE is 36.73 square units.

Given points are, A(-3, -5), B(-3, -2), C(-2, 2), D(2, -2) and E(2, -5).We know that the area of a pentagon is given by half of the product of its perimeter and apothem. Here, the apothem can be found out by finding the distance between point A and the line segment connecting B and C.

We can use the distance formula, which is given by, d = sqrt{(x2 - x1)² + (y2 - y1)²}Let's find the equation of the line segment BC by finding its slope and the y-intercept: Slope of BC, m = (y2 - y1)/(x2 - x1) = (2 + 2)/(-2 + 2) = 4/0This slope is undefined and we cannot use the slope-intercept form of the equation. Instead, we can use the general form of the equation, which is given by: ax + by + c = 0.

We can substitute point B(-3, -2) to find the value of c as: a(-3) + b(-2) + c = 0

Substituting point C(-2, 2), we get: a(-2) + b(2) + c = 0

Solving these equations simultaneously, we get c = -4, a = -2, and b = 3. Hence, the equation of line segment BC is: -2x + 3y - 4 = 0

The perpendicular distance between point A and line segment BC is given by: d

[tex]= |(-2)(-3) + 3(-5) - 4|\sqrt(-2)^2+ 3^2 = 7\sqrt{13}[/tex]

Therefore, the apothem of pentagon ABCDE is 7/√13. Let's find the distance between the vertices A and B. This is given by: [tex]\sqrt(-2 - (-3))^2 + (-2 - (-5))^2 = \sqrt{10}[/tex]

Let's find the distance between vertices B and C.

This is given by: [tex]\sqrt(-2 - (-3))^2 + (2 - (-2))^2 = \sqrt{20}[/tex]

Let's find the distance between vertices C and D. This is given by: [tex]\sqrt(2 - (-2))^2 + (2 - (-2))^2 = \sqrt{16 + 16} = 4\sqrt2[/tex]

Let's find the distance between vertices D and E. This is given by: sqrt[tex]{(2 - 2)^2 + (-5 - (-2))^2} = \sqrt{9} = 3[/tex]

Let's find the distance between vertices E and A.

This is given by: [tex]\sqrt(-3 - 2)^2 + (-5 - (-5))^2 = 5[/tex]

The perimeter of pentagon ABCDE is: [tex]P = \sqrt{10} + \sqrt{20} + 4\sqrt2 + 3 + 5 = \sqrt{10} + \sqrt{20} + 4\sqrt2 + 8[/tex]. The area of pentagon ABCDE is: [tex]A = 1/2 (P * apothem) = 1/2 (sqrt{10} + \sqrt{20} + 4\sqrt2 + 8) * 7/\sqrt13 = 36.73[/tex] (rounded to two decimal places)

Therefore, the area of pentagon ABCDE is 36.73 square units.

For more questions on Pentagon

https://brainly.com/question/31342494

#SPJ8

Answer 2

Answer: 25

Step-by-step explanation:

Just because it is right yk.


Related Questions

QUESTION 13 People arrive at a train station at a rate of 240 people/hr during the AM peak. At this time of day, the trains arrive at frequency of 6 trains/hr. Assuming everyone boards the first train to arrive, what is the expected number of people to be waiting on the platform when the next train arrives? A. 0.1 B. 24 C. 40 D. 1440

Answers

Since none of the provided options match the calculated value, none of the options (A, B, C, or D) is correct for this scenario.

To calculate the expected number of people waiting on the platform when the next train arrives, we need to use Little's Law, which states that the average number of customers in a system (L) is equal to the arrival rate (λ) multiplied by the average time spent in the system (W).

Given:

Arrival rate (λ) = 240 people/hr

Train arrival frequency = 6 trains/hr

We can calculate the average time spent in the system (W) using the formula:

W = 1 / λ

Substituting the values:

W = 1 / 240 hr/person

Now, we can calculate the average number of people in the system (L) using Little's Law:

L = λ * W

Substituting the values:

L = 240 people/hr * (1 / 240 hr/person)

Simplifying the expression:

L = 1 person

the expected number of people waiting on the platform when the next train arrives is 1 person.

To know more about number visit:

brainly.com/question/3589540

#SPJ11

Flexible electronics is becoming an increasingly popular research topic due to their exciting potential applications such as artificial skin. You land a job at FlexSkin, a new startup company in Bethlehem trying to develop electrically conductive skin- like materials for prosthetics. Their newest material prototype (called CarboFlex) is synthesized by imbedding carbon nano-fibers (CNFs) as both a highly conductive and reinforcing phase into thin films of poly-methyl-meth-acrylate (PMMA). FlexSkin claims that CarboFlex can maintain its conductive properties under temperature conditions ranging from -100 °C to 100 °C. You are suspicious since this claim is made based on separate mechanical and electrical tests! Hence, you decide to run a stress-condition-simulating dynamic bending test of the PMMA-CNF composite while concurrently measuring its electrical properties. At freezing temperatures, the composite indeed behaves as claimed but as you approach 100 °C the conductivity begins to drop rapidly as a function of number of bending cycles. Your boss sees the data, freaks out and asks for an immediate explanation. How can you explain the high temperature-induced conductive property breakdown?

Answers

As the dynamic bending test is performed, the composite's temperature stress is applied, and the difference in thermal expansion coefficients between CNFs and PMMA plays a significant role in the conductive properties' breakdown.

As the temperature approaches 100 °C, the conductivity of the PMMA-CNF composite begins to drop rapidly as a function of the number of bending cycles. In this dynamic bending test, temperature stress is applied, which affects the conductivity of the material. This effect is due to two factors.

Firstly, carbon nanofibers and PMMA have different thermal expansion coefficients, which leads to differential thermal expansion when exposed to different temperatures.

Secondly, PMMA has a glass transition temperature (Tg) of approximately 100 °C, which is close to the highest temperature at which the composite can maintain its conductivity. The composite material that Flex.

Skin is using for their Carbo

Flex product contains carbon nano-fibers (CNFs) embedded in poly-methyl-meth-acrylate (PMMA) thin films, which is highly conductive and can maintain its conductive properties under temperatures from -100 °C to 100 °C.

Learn more about carbon:

https://brainly.com/question/13046593

#SPJ11

Show how we get the parameters #atoms, coordination#, edge length c/a Ratio and the atomic Packing factor of the HCP and FCC structures. Note 1 Angstroms = 1) = 1 x10 cm 1 Picometer = 1cm/1010

Answers

The parameters for HCP and FCC structures can be obtained as follows:

HCP structure: #atoms = 2N², coordination# = 12, c/a Ratio is the ratio of height to basal plane edge length, and atomic Packing factor (APF) is the volume of atoms divided by the total volume of the unit cell.

FCC structure: #atoms = 4, coordination# = 12, c/a Ratio = 1, and APF is the volume of atoms divided by the total volume of the unit cell.

The parameters for HCP (hexagonal close-packed) and FCC (face-centered cubic) structures can be determined as follows:

For HCP structure:

Number of atoms (#atoms): In the HCP structure, each unit cell contains two atoms. Hence, the number of atoms can be calculated using the formula #atoms = 2N², where N is the number of unit cells along the basal plane.

Coordination number: The coordination number for HCP is 12, as each atom is surrounded by 12 nearest neighbors.

Edge length c/a ratio: The c/a ratio represents the ratio of the height (c-axis length) to the basal plane edge length (a-axis length) of the HCP unit cell.

Atomic Packing Factor (APF): The APF is calculated by dividing the volume occupied by the atoms in the unit cell by the total volume of the unit cell.

For FCC structure:

Number of atoms (#atoms): The FCC unit cell contains four atoms.

Coordination number: The coordination number for FCC is 12, as each atom is surrounded by 12 nearest neighbors.

Edge length c/a ratio: In the FCC structure, the c/a ratio is equal to 1, as there is no distinction between the c-axis and a-axis lengths.

Atomic Packing Factor (APF): The APF is calculated by dividing the volume occupied by the atoms in the unit cell by the total volume of the unit cell.

Note: To convert between Angstroms and centimeters, 1 Angstrom is equal to 1 × 10^(-8) cm. And 1 picometer is equal to 1 cm / (10^10).

Know more about coordination number here:

https://brainly.com/question/27289242

#SPJ11

Consider the following reaction where Kc​=9.52×10^−2 at 350 K. CH4​(g)+CCl4​(g)I2​CH2​Cl2​(g) moles of CH2​Cl2​( g), in a 1.00 liter container. Is the reaction at equilibrium? If not, what direction must it run in order to reach equilibrium? The reaction quotient, Qcr​ equals The reaction A. must run in the forward direction to reach equilibrium. B. must run in the reverse direction to reach equilibrium. C. is at equilibrium.

Answers

The concentrations of CH4 and CCl4 at equilibrium would be: [CH4] = [CCl4] = 1 - x = 0.708 MSince Qcr ≠ Kc, the reaction is not at equilibrium and must proceed in the forward direction to reach equilibrium. The correct option is A.

The reaction quotient, Qcr of the given reaction where Kc=9.52×10^-2 is given as;

Qcr = [CH2Cl2]/[CH4][CCl4]

We are given that moles of CH2Cl2 in a 1.00-liter container, so we need to calculate the concentrations of CH4 and CCl4.For CH4:

Initial concentration of CH4 = 1 mol/1 L = 1 M

At equilibrium, concentration of

CH4 = 1-x MFor CCl4:

Initial concentration of

CCl4 = 1 mol/1 L = 1 M

At equilibrium, concentration of

CCl4 = 1-x M

Now, we can put the above values in the expression for

Qcr;

Qcr

= [CH2Cl2]/[CH4][CCl4]

= x/(1-x)²

Substitute the given value of Kc in the above expression;

Kc= QcrKc

= 9.52×10^-2

= x/(1-x)²

Now, we solve the above equation to find the value of x;x = 0.292.

To know more about concentrations visit:-

https://brainly.com/question/30862855

#SPJ11

The relationship between the actual air temperature (in degrees Fahrenheit) and the temperature y adjusted for wind chill (in degrees Fahrenheit, given a 30 mph wind) is given by the following
formula:
V = -26 + 1.3x
2.1 Estimate the actual temperature if the temperature
adjusted for wind chill is -35 degrees Fahrenheit.

Answers

The estimated actual temperature, when the temperature adjusted for wind chill is -35 degrees Fahrenheit, is approximately -6.923 degrees Fahrenheit.

To estimate the actual temperature if the temperature adjusted for wind chill is -35 degrees Fahrenheit, we can use the given formula:

V = -26 + 1.3x, where V represents the temperature adjusted for wind chill and x represents the actual temperature.

We are given that the temperature adjusted for wind chill is -35 degrees Fahrenheit.

Let's substitute this value into the formula and solve for x:

-35 = -26 + 1.3x

To isolate x, we can subtract -26 from both sides of the equation:

-35 + 26 = 1.3x

Simplifying the left side of the equation:

-9 = 1.3x

Now, divide both sides of the equation by 1.3:

-9/1.3 = x

Calculating the value:

x ≈ -6.923

For similar question on actual temperature.

https://brainly.com/question/17378849  

#SPJ8

COMMUNICATION [4 marks] 5. [4 marks] The following questions refer to the relation on the below. a) State the end behavaiour of the function. b) Does the vertical asympopte affect the end bahviour of this graph. Explain. *Note: There is a horizontal asymptote aty-0 and a vertical asymptote at x-2

Answers

The end behavior of the function is as x approaches positive infinity, the function approaches y = 0 from below, and as x approaches negative infinity, the function approaches y = 0 from above. The vertical asymptote at x = 2 does not affect the end behavior of the graph. It only affects the behavior of the function near x = 2.

a) The end behavior of a function describes what happens to the function as the input values approach positive infinity and negative infinity. To determine the end behavior, we look at the leading term of the function.

In this case, since there is a horizontal asymptote at y = 0, the function approaches the x-axis as the input values become very large in magnitude (either positive or negative). This means that the end behavior of the function is as follows:
- As x approaches positive infinity, the function approaches y = 0 from below.
- As x approaches negative infinity, the function approaches y = 0 from above.

b) The vertical asymptote at x = 2 does not affect the end behavior of the graph. Vertical asymptotes indicate where the function is undefined and where the graph has a "break" or a "hole". They do not determine the behavior of the function as the input values become very large in magnitude.

Therefore, even though there is a vertical asymptote at x = 2, the end behavior of the function is still determined by the horizontal asymptote at y = 0. The vertical asymptote only affects the behavior of the function near x = 2.

Learn more about vertical asymptote :

https://brainly.com/question/9461134

#SPJ11

Sebastopol Movie Theater will need $150,000 in 5 years to replace the seats. What deposit should be made today in an account that pays 0.8%, compoundott semiamusty
(a) State the type
a.amortization
b.ordinary annuity
c.present value
d.present value of an annuity
e.sinking fund

Answers

A sinking fund is a strategy to save money over a period of time in order to meet a specific future financial obligation. In this case, the Sebastopol Movie Theater needs to save $150,000 in 5 years to replace the seats. To calculate the deposit that should be made today, we need to use the concept of present value. The present value is the current worth of a future sum of money, considering the interest it can earn over time.

Given that the account pays 0.8% interest, compounded semiannually, we can use the formula for the present value of a sinking fund: PV = FV / (1 + r/n)^(n*t), Where: PV = Present value (deposit needed today), FV = Future value (amount needed in 5 years, which is $150,000), r = Annual interest rate (0.8% or 0.008), n = Number of compounding periods per year (2 for semiannual compounding), and t = Number of years (5).

Plugging in the values into the formula: PV = 150,000 / (1 + 0.008/2)^(2*5). Calculating this expression will give us the deposit amount needed today to accumulate $150,000 in 5 years with an interest rate of 0.8% compounded semiannually.

To know more about compounded semiannually: https://brainly.com/question/30619370

#SPJ11

Determine the electron pair geometry /molecular geometry for the following compound: SO, a)Tetrahedral/Tetrahedral b)Tetrahedral/ Trigonal planar c)Trigonal planar/Trigonal planar d)Tetrahedral/Trigonal pyramidal e)Trigonal planar/Trigonal pyramidal

Answers

c) Trigonal planar/Trigonal planar

The compound SO (sulfur monoxide) consists of one sulfur atom (S) and one oxygen atom (O). To determine the electron pair geometry and molecular geometry of this compound, we need to consider the number of electron groups around the central atom (S).

In the case of SO, sulfur has six valence electrons, and oxygen has six valence electrons. The total number of valence electrons in the compound is therefore 12. Since there are no lone pairs of electrons on the central sulfur atom, all the electron groups are bonded pairs.

In the electron pair geometry, we consider both the bonded and lone pairs of electrons. Since there are three bonded pairs of electrons around the central sulfur atom, the electron pair geometry is trigonal planar.

In the molecular geometry, we only consider the positions of the bonded atoms, ignoring the lone pairs. In the case of SO, the oxygen atom is bonded to the sulfur atom, resulting in a trigonal planar molecular geometry.

Therefore, the correct answer is c) Trigonal planar/Trigonal planar.

Learn more about Trigonal planar

brainly.com/question/32826707

#SPJ11

An office machine is purchased for $6600. Under certain assumptions, its salvage value, V, in dollars, is depreciated according to a method called double declining balance, by basically 69% em year, and is given by V(t)=6600(0.69)^2, where t is the time, in years after purchase.
a) Find V'(t)
b) Interpret the meaning of V'(t)

Answers

a) V'(t) = 0

b) The meaning of V'(t) is the rate of change of the salvage value of the office machine with respect to time.

a) To find V'(t), we need to take the derivative of the function V(t) = 6600(0.69)^2 with respect to t.
Using the power rule for differentiation, we differentiate each term separately.
The derivative of 6600 with respect to t is 0, since it is a constant.
The derivative of (0.69)^2 with respect to t is 0, since it is also a constant.
Therefore, V'(t) = 0.

b) The meaning of V'(t) is the rate of change of the salvage value of the office machine with respect to time.
Since V'(t) = 0, it implies that the salvage value is not changing with time. This means that the value of the office machine remains constant over time and does not depreciate any further.
In other words, the office machine has reached its minimum value and there is no further decrease in its worth as time progresses.

Learn more about differentiation:

https://brainly.com/question/954654

#SPJ11

The speed with which small pressure waves travel through a compressi- ble fluid is the speed of sound, a, which is defined by OP a др where P is the density of the fluid, p = 1/v. Demonstrate the validity of the following relations: UCP KC, (b) a = (KRT)\/2, for an ideal gas (a) a? ET

Answers

The given relations are as follows:

(a) UCP KC
(b) a = (KRT)^(1/2), for an ideal gas

To demonstrate the validity of these relations, let's break them down step by step:

(a) UCP KC:
This relation states that UCP is equal to KC.

First, let's understand the variables involved:
- U is the internal energy of the fluid.
- C is the heat capacity of the fluid.
- P is the pressure of the fluid.
- K is a constant.

To show the validity of this relation, we need to know that UCP is constant. In other words, the internal energy multiplied by the heat capacity is always constant. This is true for many substances, including fluids. Therefore, we can say that UCP = KC.

(b) a = (KRT)^(1/2), for an ideal gas:
This relation states that the speed of sound, a, for an ideal gas is equal to the square root of KRT.

Again, let's understand the variables:
- a is the speed of sound.
- K is a constant.
- R is the ideal gas constant.
- T is the temperature of the gas.

To demonstrate the validity of this relation, we need to look at the equation that relates the speed of sound to the density and the compressibility of the fluid. For an ideal gas, the compressibility factor is equal to 1. Therefore, we can use the equation a = (KRT)^(1/2), where the compressibility factor is implicitly assumed to be 1.

To know more about heat capacity  :

https://brainly.com/question/28302909

#SPJ11

4 $30 can be exchanged for 170 Egyptian pounds.
How many Egyptian pounds would you get for $12?

Answers

Answer:

68 Egyptian

Step-by-step explanation:

$30=170 Egyptian

x Egyptian=$12

using by chain rule,

170*12/30

68 egyptian

solve the questio given in the image

Answers

Solving a system of equations, we can see that the rational number is 7/15.

How to find the rational number?

Let's define the variables:

x = numerator.

y = denominator.

First, we know that the denominator is greater than the numerator by 8, so:

y = x+ 8.

Then we also can write:

(x + 17)/(y + 1) = 3/2

So we have a system of equations, we can rewrite the second equation to get:

(x + 17) = (3/2)*(y + 1)

x + 17 = (3/2)*y + 3/2

Now we can replace the first equation here, we will get:

x + 17 = (3/2)*(x + 8) + 3/2

x + 17 = (3/2)*x + 12 + 3/2

17 - 12 - 3/2 = (3/2)*x - x

5 - 3/2 = (1/2)*x

2*(5 - 3/2) = x

10 - 3 = x

7 = x

then the denominator is:

y = x + 8 = 7 + 8 = 15

The rational number is 7/15.

Learn more about systems of equations at:

https://brainly.com/question/13729904

#SPJ1

2- A cell consisting of two silver plates dipping in a olm and o.olm solution of silver nitrate AgNO3 respectively at 25c a- Diagram the cell? Write the cell reaction ? the cell potential? G calculate

Answers

The cell diagram consists of two silver plates dipping in different concentrations of silver nitrate solutions. The cell reaction is Ag(s) + Ag+(aq) → Ag+(aq) + Ag(s). The cell potential is 0.80 V, and the value of ΔG can be calculated using the equation ΔG = -1 * 96485 C/mol * 0.80 V.

To diagram the cell, we have two silver plates dipping in two separate solutions. One plate is immersed in a 1.0 M silver nitrate (AgNO3) solution, while the other plate is dipped in a 0.1 M silver nitrate (AgNO3) solution. Both solutions are at a temperature of 25°C.

To write the cell reaction, we need to identify the oxidation and reduction half-reactions. In this case, the oxidation half-reaction occurs at the anode (the plate with the lower concentration of AgNO3), while the reduction half-reaction occurs at the cathode (the plate with the higher concentration of AgNO3).

Oxidation half-reaction: Ag(s) → Ag+(aq) + e-
Reduction half-reaction: Ag+(aq) + e- → Ag(s)

Now, to determine the overall cell reaction, we need to balance these two half-reactions. By multiplying the oxidation half-reaction by 1 and the reduction half-reaction by 1, we get:

Ag(s) → Ag+(aq) + e-
Ag+(aq) + e- → Ag(s)

Adding these two half-reactions together gives us the overall cell reaction:

Ag(s) + Ag+(aq) → Ag+(aq) + Ag(s)

To calculate the cell potential (E°cell), we can use the Nernst equation:

Ecell = E°cell - (0.0592 V/n) log(Q)

Since the concentration of Ag+ in both solutions is the same, Q (reaction quotient) is equal to 1. Thus, log(Q) = 0.

Therefore, the cell potential (Ecell) is equal to the standard cell potential (E°cell). We can look up the standard reduction potential of the Ag+/Ag half-reaction, which is 0.80 V. Hence, the cell potential is 0.80 V.

To calculate the value of ΔG (Gibbs free energy), we can use the equation:

ΔG = -nF Ecell

Where n is the number of electrons transferred in the balanced cell reaction, and F is Faraday's constant (96485 C/mol).

Since 1 mole of Ag+ is reduced to 1 mole of Ag in the balanced cell reaction, n is equal to 1. Plugging in the values, we get:

ΔG = -1 * 96485 C/mol * 0.80 V

Simplifying this equation gives us the value of ΔG.

The cell diagram consists of two silver plates dipping in different concentrations of silver nitrate solutions. The cell reaction is Ag(s) + Ag+(aq) → Ag+(aq) + Ag(s). The cell potential is 0.80 V, and the value of ΔG can be calculated using the equation ΔG = -1 * 96485 C/mol * 0.80 V.

Learn more about concentration from the given link:

https://brainly.com/question/17206790

#SPJ11

The figure below shows part of a circle, with central angle as marked. What
part of the full circle does the figure represent? Express your answer as a
fraction in simplest terms.

Answers

The figure given in the problem represents 1/4 of the full circle. So, the answer is 1/4.

Here's how we can arrive at that conclusion: We know that a circle has 360 degrees, and the angle given in the figure is a central angle that spans across one of the quarters of the circle.

Since we have four equal parts in a full circle, each quarter must have an angle measure of 360 degrees / 4 = 90 degrees. Therefore, the central angle in the figure represents an angle measure of 90 degrees, which is equivalent to one-quarter of the full circle. Hence, the answer is 1/4.

For more questions on: circle

https://brainly.com/question/28162977

#SPJ8

What is ΔrH for a reaction that has ΔrG =
73.7 kJ mol-1 and ΔrS = -34.8 J
mol-1 K-1 at 23.5 °C?
Express your answer in kJ mol-1 .

Answers

The ΔrH for a reaction can be determined using the relationship between ΔrH and ΔrG. At constant temperature and pressure, ΔrG = ΔrH - TΔrS, where ΔrS is the change in entropy for the reaction and T is the temperature in Kelvin. In this case, the question provides the value of ΔrG in units of mol-1 K-1 at a specific temperature.

To find ΔrH, we can rearrange the equation to solve for it: ΔrH = ΔrG + TΔrS. Since the value of ΔrG is given, we can substitute it into the equation along with the temperature (23.5 °C = 296.65 K) to calculate ΔrH. Additionally, it is important to note that the unit for ΔrH is kJ mol-1.

Let's say the value of ΔrG is -50 mol-1 K-1. We substitute this value into the equation and also consider the value of ΔrS, which is not provided in the question. As a result, we cannot calculate the exact value of ΔrH without knowing ΔrS.

In summary, to determine the ΔrH for a reaction given ΔrG and temperature, we use the equation ΔrH = ΔrG + TΔrS. However, without the value of ΔrS, we cannot calculate the exact value of ΔrH.

Know more about entropy here:

https://brainly.com/question/34015011

#SPJ11

The goal of brainstorming is to encourage creativity by reducing criticisms of novel ideas Odeveloping social relationships in the group focusing ideas and reducing wild suggestions reducing the number of creative ideas that need to be evaluated

Answers

The goal of brainstorming is to encourage creativity and generate a wide range of ideas. Therefore, the given statement in the question is: True.

The goal of brainstorming is indeed to encourage creativity by reducing criticisms of novel ideas. Brainstorming sessions are designed to create a safe and non-judgmental environment where participants can freely express their ideas without fear of criticism. This approach helps foster creativity and allows for the exploration of unconventional or wild suggestions that might lead to innovative solutions.

By reducing criticisms, brainstorming allows individuals to think more freely and divergently, which can lead to the development of unique ideas. The focus is on generating a large quantity of ideas without immediate evaluation or judgment, promoting a free flow of creativity and enabling individuals to build upon each other's suggestions.

In conclusion, the goal of brainstorming is to encourage creativity by creating a supportive environment that reduces criticisms of novel ideas. This approach promotes the generation of diverse and innovative solutions.

The complete question is given below:

"The goal of brainstorming is to encourage creativity by reducing criticisms of novel ideas Odeveloping social relationships in the group focusing ideas and reducing wild suggestions reducing the number of creative ideas that need to be evaluated

TrueFalse

"

You can learn more about brainstorming techniques at

https://brainly.com/question/30466216

#SPJ11

Dry nitrogen gas (100.0 L) was bubbled through liquid acetone, CH 3COCH 3, at a given temperature and the evaporated acetone condensed; its mass was then measured. Using the data below, calculate the heat of vaporization (kJ/mol) of acetone?
Temperature Mass CH3COCH3 collected, g
9.092 35.66
29.27 82.67

Answers

the heat of vaporization of acetone  is ≈ 45.1 kJ/mol by using formula of
ΔHvap = q / n and q = m × ΔT × Cp.

To calculate the heat of vaporization (ΔHvap) of acetone (CH3COCH3) using the given data, we can use the equation:
ΔHvap = q / n
where q is the heat absorbed or released during the phase change (condensation in this case), and n is the number of moles of acetone.
To find q, we can use the equation:

q = m × ΔT × Cs

where m is the mass of acetone, ΔT is the change in temperature, and Cs is the specific heat capacity of acetone.

First, we need to find the moles of acetone:

moles = mass / molar mass

The molar mass of acetone (CH3COCH3) is calculated as follows:
(1 × 12.01 g/mol) + (3 × 1.01 g/mol) + (1 × 16.00 g/mol) = 58.08 g/mol

Now, let's calculate the moles of acetone for each temperature:

For 9.092°C:
moles1 = 35.66 g / 58.08 g/mol

For 29.27°C:
moles2 = 82.67 g / 58.08 g/mol

Next, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 29.27°C - 9.092°C

Now, we can calculate q:

q1 = (mass1) × (ΔT) × (Cs)
q2 = (mass2) × (ΔT) × (Cs)

Lastly, we can calculate the heat of vaporization (ΔHvap) using the equation:

ΔHvap = (q1 + q2) / (moles1 + moles2)

Cp = (2.22 J/(g·°C)) / (58.08 g/mol) ≈ 0.0382 J/(mol·°C)

Using the given temperatures:

ΔT = Temperature 2 - Temperature 1

ΔT = 29.27 °C - 9.092 °C ≈ 20.18 °C

Now we can calculate the heat absorbed or released (q):

q = m × ΔT × Cp

q = 47.01 g × 20.18 °C × 0.0382 J/(mol·°C)

q ≈ 36.53 J

Finally, we can calculate the heat of vaporization (ΔHvap):

ΔHvap = q / n

ΔHvap = 36.53 J / 0.810 mol

ΔHvap ≈ 45.1 kJ/mol
Make sure to substitute the values into the equations and perform the calculations to find the heat of vaporization of acetone in kJ/mol.

To know more about heat of vaporization Visit:

https://brainly.com/question/31804446

#SPJ11

How many moles of cobalt, Co, atoms are there in 2.00x1022 Co atoms?
A) 0.0747 mole B )1.77x10^3 mole
C) 0.116 mole
D)3.55x10^25 mole

Answers

To calculate the number of moles of cobalt (Co) atoms in 2.00x10²² Co atoms, we need to use Avogadro's number and the molar mass of cobalt.

Avogadro's number, which is approximately 6.022x10²³, represents the number of particles (atoms, molecules, or ions) in one mole. This constant is useful in converting between the number of particles and the amount of substance in moles.

The molar mass of cobalt is 58.93 grams per mole (g/mol). This value represents the mass of one mole of cobalt atoms.

To find the number of moles of cobalt atoms in 2.00x10²² Co atoms, we can follow these steps:

Divide the given number of cobalt atoms (2.00x10²²) by Avogadro's number (6.022x10²³) to convert the number of atoms to moles.

2.00x10²² Co atoms / 6.022x10²³ atoms/mol = 0.0332 mol

Therefore, there are approximately 0.0332 moles of cobalt atoms in 2.00x10²² Co atoms.

The correct answer is A) 0.0332 mol.

To learn more about Avogadro's number visit:

brainly.com/question/32418398

#SPJ11

Determine # of triangles 25. b=8,c=2,γ=45∘

Answers

The number of triangles formed is 1.

In order to determine the number of triangles, we need to use the Sine Law.

We are given that b=8,c=2, and γ=45°.

We know that the Sine Law states that a/sin A = b/sin B = c/sin C.

Using the formula above and substituting given values we have:

25/sin 90° = 8/sin A = 2/sin 45°

The sine of 90° is 1, so we have:

25 = 8 sin A 25/8 = sin A

sin A = 0.3125sin^-1 0.3125 = 18.2°

Now we can use the Sine Law again to find the other sides of the triangle:

a/sin A = b/sin B = c/sin C

Use the formula above and substitute our values.

a/sin 18.2° = 8/sin 45°a = 8 sin 18.2°a ≈ 2.65

Now that we have all the sides of the triangle, we can check if this is possible to form a triangle.

To do this, we will use the Triangle Inequality Theorem.

The theorem states that for a triangle to be formed, the sum of the lengths of any two sides must be greater than the length of the third side.

a + b > c8 + 2.65 > 252.65 + 2 > 8a + c > b2.65 + 25 > 8 + 225 + 8 > 2.65c + b > a25 + 2 > 82.65 + 8 > 25

Yes, the values of the sides satisfy the Triangle Inequality Theorem, so we can form a triangle.

The number of triangles formed is 1.

To know more about triangles visit:

https://brainly.com/question/29083884

#SPJ11

The compounds in which one or more hydrogen atoms in an alkane have been replaced by an - OH group are called alcohols. True False

Answers

It is true that the compounds in which one or more hydrogen atoms in an alkane have been replaced by an -OH group are indeed called alcohols.

Alcohols are a class of organic compounds that contain one or more hydroxyl (-OH) groups attached to a hydrocarbon chain. The hydroxyl group replaces one or more hydrogen atoms in an alkane, resulting in the formation of an alcohol. This substitution of a hydrogen atom with an -OH group introduces the characteristic properties and reactivity of alcohols, including their ability to form hydrogen bonds, undergo oxidation reactions, and participate in various chemical reactions.

The presence of the hydroxyl group also imparts certain physical properties to alcohols, such as higher boiling points and water solubility compared to their corresponding hydrocarbons. Overall, the presence of the -OH group distinguishes alcohols from other organic compounds and gives them their unique properties and characteristics.

To know more about compound,

https://brainly.com/question/33301497

#SPJ11

Water is pumped at atmospheric pressure with a velocity of 5 m/s through a pump having suction diameter of 25 cm. If the required discharge pressure is 3 bar and the velocity is 8 m/s, calculate: 1. The head of the pump on the suction and discharge sides. 2. The required horsepower 3. The efficiency of the pump if the pump is rated at 100 kW.

Answers

The head of the pump on the suction is  0.127 m and discharge sides is 32.611 m. The efficiency of the pump is approximately 7.97 × 10⁻⁸ or 0.0000000797 (rounded to eight significant figures).

Given the suction diameter of 25 cm, we can calculate the flow rate (Q) using the velocity of 5 m/s and the formula Q = Av, where A is the cross-sectional area.

First, let's calculate the cross-sectional area of the suction pipe:

A = π r²

Given the diameter is 25 cm, the radius (r) is 25 cm / 2 = 12.5 cm = 0.125 m.

Substituting the values, we have:

A = π (0.125)² ≈ 0.049 m²

Now we can calculate the flow rate:

Q = Av = 0.049 m² × 5 m/s = 0.245 m³/s

The head of the pump on the suction and discharge sides:

The head on the suction side (hs) can be calculated using the velocity v1 and the formula hs = (v₁²) / (2g).

Given v₁ = 5 m/s and assuming g = 9.81 m/s², we have:

hs = (5²) / (2 × 9.81) ≈ 0.127 m

The head on the discharge side (hd) can be calculated using the pressure difference and the velocity v. The pressure difference is given as P₂ - P₁, where P₁ is the atmospheric pressure (0 bar).

Given P₂ = 3 bar and assuming atmospheric pressure as 0 bar, we have:

hd = (P₂ - P₁) / (ρg) + (v₂²) / (2g)

Since water is used, we can assume the density (ρ) as 1000 kg/m³.

Substituting the values, we have:

hd = (3 × 10⁵) / (1000 × 9.81) + (8²) / (2 × 9.81) ≈ 32.611 m

The efficiency of the pump:

To calculate the efficiency (η), we need the input power (Pin) and the output power (Pout). Given that the pump is rated at 100 kW, the input power is 100 kW.

The output power can be calculated using the formula Pout = Q * (hd - hs).

Substituting the values, we have:

Pout = 0.245 m³/s (32.611 m - 0.127 m)

Finally, we can calculate the efficiency:

η = Pout / Pin = (0.245 m³/s (32.611 m - 0.127 m)) / (100 kW)

To find the efficiency of the pump, let's calculate:

(0.245 m³/s (32.611 m - 0.127 m)) / (100 kW)

= (0.245 (32.611 - 0.127)) / (100 * 1000)

= (0.245 × 32.484) / (100,000)

= 0.00796878 / 100,000

≈ 7.97 × 10⁻⁸

Therefore, the efficiency of the pump is approximately 7.97 × 10⁻⁸ or 0.0000000797 (rounded to eight significant figures).

To know more about efficiency of the pump:

https://brainly.com/question/21329931

#SPJ4

--The given question is incomplete, the complete question is given below "Water is pumped at atmospheric pressure with a velocity of 5 m/s through a pump having suction diameter of 25 cm. If the required discharge pressure is 3 bar and the velocity is 8 m/s, calculate: 1. The head of the pump on the suction and discharge sides. 2. The efficiency of the pump if the pump is rated at 100 kW.  "--

The following is a statement of which Law of Thermodynamics?
" The entropy of a perfect crystal of a pure substance is zero at zero degrees Kelvin"
Group of answer choices
A Third Law
B Fourth Law
C First Law
D Second Law

Answers


The following statement "The entropy of a perfect crystal of a pure substance is zero at zero degrees Kelvin" is an accurate statement of the third law of thermodynamics. Third law of thermodynamics states that the entropy of a pure crystal at absolute zero is zero.

The three laws of thermodynamics are important in the study of thermodynamics because they provide a framework for explaining and understanding the behavior of energy in physical systems.The first law of thermodynamics is a statement of the conservation of energy. The second law of thermodynamics is a statement of the increase in the entropy of a closed system over time. The third law of thermodynamics is a statement of the entropy of a pure crystal at absolute zero being zero.

The third law of thermodynamics is a fundamental principle of physics that states that the entropy of a pure crystal at absolute zero is zero. It is an important principle in the study of thermodynamics because it provides a framework for explaining the behavior of energy in physical systems.

In conclusion, the answer to this question is A Third Law.

To know more about   entropy visit

https://brainly.com/question/20166134

#SPJ11

Ammonia and carbon dioxide are produced from the hydrolysis of urea, the corresponding chemical reaction shown below
(H2)2() + H2() → 2() + 2H3()
If 1 mole of urea is used for the reaction, what is the standard entropy change in J/K?

Answers

The standard entropy change, ∆S°, is 391.3 J/mol K.The chemical reaction involved is (H2)2CO + H2O → 2NH3 + CO2

The standard entropy change, ∆S°, is given by the expression:

∆S° = S°(products) - S°(reactants)

The entropy of each reactant and product can be obtained from the table provided. Using the values in the table above:

∆S° = S°(NH3) + S°(CO2) - S°(H2)2CO - S°(H2O)

∆S° = (2 × 192.5 J/mol K) + (213.6 J/mol K) - (134.9 J/mol K) - (69.9 J/mol K)

∆S° = 391.3 J/mol K

Therefore, the standard entropy change, ∆S°, is 391.3 J/mol K.

Learn more about standard entropy change

https://brainly.com/question/32768547

#SPJ11

What is the molar solubility of lead(II) chloride in a (3.9×10∧0)M solution of potassium chloride? Report your answer in scientific notation to 2 sig figs. Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: ×10 Answer

Answers

The molar solubility of lead(II) chloride in a (3.9×10⁰) M solution of potassium chloride is approximately 1.12×10⁻⁶ M.

To determine the molar solubility of lead(II) chloride (PbCl₂) in a (3.9×10⁰) M solution of potassium chloride (KCl), we need to use the solubility product constant (Ksp) for PbCl₂. The Ksp for PbCl₂ is typically around 1.7×10⁻⁵.

Using the stoichiometry of the balanced equation for the dissolution of PbCl₂, we can assume that the molar solubility of PbCl₂ is "x". The equilibrium expression is given by:

Ksp = [Pb²⁺][Cl⁻]²

Substituting the given concentration of KCl as [Cl⁻] = (3.9×10⁰) M, we have:

Ksp = (x)(3.9×10⁰)²

Solving for "x", we get:

1.7×10⁻⁵ = (x)(15.21)

x = 1.7×10⁻⁵ / 15.21

x ≈ 1.12×10⁻⁶

Therefore, the molar solubility of lead(II) chloride in a (3.9×10⁰) M solution of potassium chloride is approximately 1.12×10⁻⁶ M.

To know more about molar solubility:

https://brainly.com/question/31493083


#SPJ4

Answer: the molar solubility of lead(II) chloride in the (3.9×10⁰) M solution of potassium chloride is approximately 3.90×10² mol/L

Step-by-step explanation:

To determine the molar solubility of lead(II) chloride (PbCl₂) in a (3.9×10⁰) M solution of potassium chloride (KCl), we need to consider the common ion effect.

The common ion effect states that the solubility of a salt is reduced when it is dissolved in a solution containing a common ion. In this case, both lead(II) chloride and potassium chloride contain chloride ions (Cl⁻).

Let's assume the molar solubility of lead(II) chloride in pure water is x mol/L.

When lead(II) chloride is dissolved in a (3.9×10⁰) M solution of potassium chloride, the concentration of chloride ions in the solution will be (3.9×10⁰) M + x M, assuming complete dissociation.

According to the solubility product expression for lead(II) chloride:

PbCl₂(s) ⇌ Pb²⁺(aq) + 2Cl⁻(aq)

The solubility product constant (Ksp) expression is:

Ksp = [Pb²⁺][Cl⁻]²

Since the concentration of chloride ions is (3.9×10⁰) M + x M, and assuming complete dissociation, we can substitute these values into the Ksp expression:

Ksp = (x)(3.9×10⁰ + x)²

To simplify the expression, we can neglect the contribution of x compared to (3.9×10⁰), as it will be significantly smaller. Therefore, we can approximate the expression as:

Ksp ≈ (3.9×10⁰)²

Ksp ≈ 1.52×10²

Since Ksp is a constant value, the solubility product expression can be written as:

1.52×10² = (x)(3.9×10⁰)

Now we can solve for x, which represents the molar solubility of lead(II) chloride:

x ≈ (1.52×10²) / (3.9×10⁰)

x ≈ 3.90×10²

Therefore, the molar solubility of lead(II) chloride in the (3.9×10⁰) M solution of potassium chloride is approximately 3.90×10² mol/L, when reduced to the highest power possible.

#SPJ11

Find the segment length endicated

Answers

The value of the segment length indicated is 17.5

What is Pythagoras theorem?

Pythagorean theorem, the well-known geometric theorem that the sum of the squares on the legs of a right triangle is equal to the square on the hypotenuse.

Therefore, of a and b are the legs of the triangle and c is the hypotenuse, then

c² = a² + b²

In circle geometry, It is stated that the angle between the radius of a circle and it's tangent is 90°.

Therefore;

c² = 10.5² + 14²

c² = 110.25 + 196

c² = 306.25

c = 17.5

Therefore the value of the segment length indicated is 17.5

learn more about Pythagoras theorem from

https://brainly.com/question/343682

#SPJ1

Find the Area of B (Please show work how you got the answer)

Answers

Answer: 25π, or 78.540

Step-by-step explanation:

The area of a circle is πr^2, with r representing the radius. The radius of this circle is 5 inches, which plugged into the equation gives π(5)^2, or 25π. If you input that into a calculator, it gives 78.540.

Solve for X (Please show how you got the answer by showing work please)

Answers

The value of x = 17°

Angle on a straight line:

From trigonometry and geometry of angles and lines, the sum of angles on a straight line is equal to 180°.

From the given figure, the angles are all lying on a straight line at the same point, hence their sum is 180°.

The three angles are:

    • (2x + 3)°

    • a right angle = 90°

    • (3x + 2)°

Sum the three angles together and equate the sum to 180° to give the following equation:

(2x + 3) + 90 + (3x + 2) = 180

Solve for x,

(2x + 3) + 90 + (3x + 2) = 180

5x + 3 + 2 + 90 = 180

5x + 95 = 180

5x = 180 - 95

5x = 85

x = 85/5

x = 17°

Learn more about angles from:  https://brainly.com/question/25716982

#SPJ1

The max. aggregate size that used in design concrete mix is for concrete floor with 120 mm depth and 150 mm spacing between the reinforcing bar 40 mm O 112.5 mm 12.5 mm O 25 mm O

Answers

The maximum aggregate size used in the design of a concrete mix for a concrete floor with a depth of 120 mm and a spacing of 150 mm between the reinforcing bars is dependent on various factors, including the desired strength and workability of the concrete.

Typically, a larger maximum aggregate size is preferred for concrete mix design as it helps to enhance the workability and reduce the amount of cement paste required. However, the maximum aggregate size should not exceed one-fifth of the narrowest dimension between the reinforcing bars.

In this case, the spacing between the reinforcing bars is 150 mm. Therefore, the maximum aggregate size should be less than or equal to one-fifth of this spacing, which is 30 mm (150 mm ÷ 5 = 30 mm).

To summarize:

1. Determine the spacing between the reinforcing bars (in this case, 150 mm).
2. Calculate one-fifth of the spacing (150 mm ÷ 5 = 30 mm).
3. Ensure that the maximum ./ size used in the concrete mix is less than or equal to this value (30 mm).

By following these guidelines, you can ensure that the concrete mix design is appropriate for the given depth and spacing of the reinforcing bars in the concrete floor.

To know more about concrete:

https://brainly.com/question/25500184

#SPJ11

A pleated sheet arrangement of proteins....
contains interchain hydrogen bonds
is found in muscle fibers
is found in silk fibers
results when hydrogen bonds occur between protein chains
all of these

Answers

A pleated sheet arrangement of proteins, all of the statements are true regarding the pleated sheet arrangement of proteins.  

So the correct option is all of this.

The pleated sheet arrangement is a secondary structure in proteins where adjacent protein chains or segments align side-by-side and are held together by interchain hydrogen bonds. These hydrogen bonds form between the peptide backbone atoms, specifically the amide nitrogen and carbonyl oxygen. This arrangement creates a repeating pattern of pleats or folds, giving rise to the characteristic "sheet" appearance.

The pleated sheet arrangement is found in various proteins, including those present in muscle fibers and silk fibers. In muscle fibers, the pleated sheet arrangement contributes to the formation of strong, fibrous structures that provide mechanical support and contractile properties. In silk fibers, the pleated sheet arrangement contributes to their exceptional strength and elasticity.

Overall, the pleated sheet arrangement results from the formation of interchain hydrogen bonds between protein chains, enabling the proteins to adopt a stable and functional conformation.

Learn more about pleated sheet of protein

https://brainly.com/question/30868219

#SPJ11

38. In the figure below, points X and Y lie on the circle with
center O. CD and EF are tangent to the circle at X and Y.
respectively, and intersect at point Z. If the measure of XOY
is 60°, then what is the measure of CZF?
F. 45°
G. 60°
H 90°
J. 120°
K. 180°

Answers

Based on the information given, we can determine the measure of CZF by analyzing the angles in the figure.

Since CD and EF are tangent lines to the circle, the angles formed at X and Y between the tangents and radii are right angles. Therefore, angles OXC and OYF are both 90°.

Since the sum of angles in a triangle is 180°, we can find the measure of angle XOY:

XOY = 180° - OXC - OYF
XOY = 180° - 90° - 90°
XOY = 0°

However, this result contradicts the given information that the measure of XOY is 60°. Therefore, the information provided is not consistent, and we cannot determine the measure of CZF based on the given figure.
Other Questions
Determine the volume of the paralepidid formed by the three vectors defined below 1p= -2.2 + 0.5j + 11/30kq = 8 3.89 j+ 2k = = 1/8 + 1.89j - 4k Define the following data types in the requested PL. (a) Cartesian product of integers and doubles in Haskell. (b) Cartesian product of integers and doubles in Java. (c) Union of integers and doubles in Haskell. In a well-organized paragraph of at least 5 sentences, provide responses for 2 of the following.a. According to Vygotsky, what is the best way to promote cognitive development ofyoung children?b. What cognitive advantages and disadvantages would today's youth, who rely heavily oncommunications technology, have when compared to people who were young thirtyyears ago?" Consider the closed loop system with the following forward path transfer function G(s) 200(s + 2)(s + 5) (s + 4) (2s + 6) A step input of height 12 size is applied. Find the constant position error and the steady state error. Supposing the copper strip is 23 cm long, we can also measure the ohmic voltage drop across the strip along the direction of the current flow. This potential difference is typically much larger than the Hall voltage. What value of B (in T) will make the Hall voltage equal to 10% of the voltage drop along the length of the copper strip? (Calculate your answer using the same copper strip discussed in the Example.) By polytropic process, isothermal process or adiabatic process to press the ideal gas from same p1 to same p2, which process has the maximum final temperature? Give some explanation. By polytropic process, isothermal process or adiabatic process to press the ideal gas from same p1 to same p2, which process has the maximum final temperature? Give some explanation. Convert (-5) to its binary notation using 2s complementformatShow your full work It shows the thermodynamic cycle that an ideal gas performs, that during any process, the number of moles remains constant. At point b the temperature is Tb=460.0K and the pressure is pb=5kPa. At the point Ta=122.68kIt shows the thermodynamic cycle that an ideal gas performs, that during any process, the number of moles remains constant. At point b the temperature is Tb=460.0K and the pressure is pb=5kPa. At the point Ta=122.68ka) Obtain the pressure at point a (Pac)b) Obtain Tc, the temperature at point c.c) What is the work done in the process between b and c? explain When using a file blocking profile you see a file type called Multi-Level-Encoding. You are running PanOS 9.1. Is your firewall is capable of decoding up to 4 levels? True = Yes False = No True FalsePrevious question An aqueous solution of a soluble compound (a nonelectrolyte) is prepared by dissolving 7.2 g of the compound in sutficient water to form 250 mL of solution. The solution has an osmotic pressure of 1.1 atm at 25C. What is the molar mass of the compound? The interment of Japanese Americans during WWII primarily affected those Japanese Americans who lived where? Given a voltage measured from the power grid and its sampling frequency Fs in file voltage.mat, 1. Determine the amplitude and frequency of the fundamental component and harmonic components. 2. Calculate the THD En=2 V2 = =2 THD Vi where: Vi is the RMS value of this voltage with the fundamental frequency Vn is the RMS value of this voltage with the harmonic frequency Hypothesis: If the type of the food available changes, then the frequency of beak types will change, because birds with beaks more suited to the available food will be more successful over time. Was your conclusion that the frequency of the beak types will change? Was your reason that natural selection favors organisms better adapted to the environment they live in? Calculate the force on a 2.00C charge in a 1.80N/C electric field. By using 3 prime numbers, we can also define RSA cryptostem where N=pqr. Again we must have gcd(e,(N))=1 and d is the multiplicative inverse of e in modulo (N). (b) Why this 3-prime RSA is not preferred? What cultural practice among Americans might seem peculiar to someone from outside this society?What is the cultural meaning of that practice? Use Horace Miner ("Body Ritual among the Nacirema") in your answer.What are the global ripple effects of exporting this American cultural practice? 5). Lidar of robot indicated that distance to object is 200m. Phase shift p=10 . What modulation (f) frequency of laser beam was used? Heart Rate Investigation Students will investigate their heart rate during different physical activities. They will measure their resting heart rate and then record their heart rate afterperforming activities such as walking, running, or jumping. They are to compare and analyse their heart rate data, noting any changes basedon activity intensity. They will explain the relationship between heart rate and physical activity If a random variable X is distributed normally with zero mean and unit standard deviation, the probability that 0 23- According to Hudson (Chapter 14), which of the following is TRUE?Group of answer choicesBasic Oxygen Process mixes molten pig iron with scrap steel in a furnace which pure oxygen is blown into under low pressureAndrew Carnegie bought the United States Steel Company from J. P. Morgan and created the industrial city of Gary, IndianaIn the early 2000s, India invested in North American steel mills and made large iron ore purchasesUS and Canadian steel producers were quick to adopt the innovations that appeared in Germany and Japan following WWIIThe automobile industry in the Lower Great Lakes region and the Ohio Valley now rely on electric furnace minimills for steel production