By acting as a competitive inhibitor of the enzyme dihydropteroate synthase (DHPS), which is involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.
SulfanilamideSulfanilamide can bind to the active site of the enzyme, preventing the substrate from binding and decreasing the activity of the enzyme. It shares structural similarities with the DHPS substrate (p-aminobenzoic acid). Folic acid is required for the bacteria to grow and reproduce, hence they are unable to manufacture it. The bacteria eventually perish because they are unable to produce the nucleotides needed for DNA synthesis without folic acid. Therefore, sulfanilamide has a bacteriostatic effect, which prevents the growth and spread of bacteria that depend on folic acid to live.By acting as a competitive inhibitor of dihydropteroate synthase (DHPS), an enzyme involved in the bacterial manufacture of folic acid, sulfanilamide prevents the formation of folic acid.
Sulfanilamide inhibits DHPS activity and stops bacteria from generating folic acid by attaching to the enzyme's active site and blocking the substrate from binding. Sulfanilamide has a bacteriostatic action as a result of this, which prevents bacteria that depend on folic acid for living from growing and replicating.
learn more about folic acid here
https://brainly.com/question/4372756
#SPJ1
Identify the spectator ions in this reaction. Check all that apply.
H+ + CN + Li+ + OH → Lit + CN + H₂O
он+
O CN-
O Lit
OH-
H₂O
Answer:
The spectator ions are CN- and Li+
Explanation:
Spectator ions are ions in a chemical equation that don't participate in the reaction. To identify these ions you have to look for which ions are on both sides of the chemical equation.
In this chemical equation Li+ and CN- are on both sides of the equation making them spectator ions.
give the expected product of the following reaction.
We are given the benzaldehyde and it is treated with phosphorus ylide and we know when carbonyl group is reacted with phosphorus ylide there is formed alkene by remoing the O from carbonyl and attached the phosphorus ylide alkane part
Benzaldehyde is an aromatic compound with a distinct odour resembling almonds. It can be extracted from a variety of natural sources and can also be synthesised by liquid phase chlorination of toluene. There is no chemical distinction between these two types of benzaldehyde.Benzaldehyde is a widely used compound in the chemical industry. It also finds usage in several other items
To know more about benzaldehyde click here
brainly.com/question/28146845
#SPJ4
when sodium chloride dissolves in water, how do the water molecules orient around the ions? question 6 options: a) the oxygen atoms point toward the sodium ions, and the hydrogen atoms point toward the chloride ions. b) the hydrogen atoms point toward both the sodium and the chloride ions. c) the oxygen atoms point toward both the sodium ions and the chloride ions. d) the hydrogen atoms point toward the sodium ions, and the oxygen atoms point toward the chloride ions. e) water molecules are randomly oriented around the ions.
When sodium chloride dissolves in water, water molecules orient around the ions in such a way that the hydrogen atoms point toward the chloride ions. The correct option is b.
When sodium chloride (NaCl) dissolves in water, it separates into [tex]Na^+[/tex] and [tex]Cl^-[/tex] ions. As a result, water molecules surround the ions, shielding them from one another. Water molecules are orientated around the ions in such a way that their hydrogen atoms (δ+) are directed toward the chloride ions ( [tex]Cl^-[/tex]) and their oxygen atoms (δ-) are directed toward the sodium ions ([tex]Na^+[/tex]).
A water molecule has two positively charged hydrogen atoms and one negatively charged oxygen atom that form a V-shaped geometry, with the oxygen atom at the vertex. The H-O-H bond angle is 104.5 degrees. As a result, when[tex]Na^+[/tex] and [tex]Cl^-[/tex] ions are present in water, they are surrounded by water molecules, with their hydrogen atoms pointed toward the [tex]Cl^-[/tex] and their oxygen atoms pointed toward the [tex]Na^+[/tex] .
In summary, when sodium chloride dissolves in water, the water molecules orient around the ions in such a way that the hydrogen atoms point toward the chloride ions. The correct option is b.
To know more about sodium chloride refer here :
https://brainly.com/question/30460299
#SPJ11
Calculate the enthalpy of
vaporization of benzene (C6H6) at 298.2 K. The standard enthalpy of
formation of gaseous benzene is +82.93 kJ.mol-¹. (b) Given that,
for liquid benzene, Cp.m = 136.1 J.mol-¹.K¯¹ and that, for gaseous
benzene, Cp,m = 81.67 J.mol-¹.K1, calculate the enthalpy of
vaporization of benzene at its boiling point (353.2).
The enthalpy of vaporization of benzene at 298.2 K is 30.8 kJ/mol.
The enthalpy of vaporization of benzene at its boiling point
33.06 kJ/mol
Steps(a) To calculate the enthalpy of vaporization of benzene at 298.2 K, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = -(ΔHvap/R)(1/T2 - 1/T1)
where P1 and P2 are the vapor pressures of benzene at two different temperatures (in this case, we will use the normal boiling point of benzene, 353.2 K, and the temperature given in the problem, 298.2 K), ΔHvap is the enthalpy of vaporization we want to calculate, R is the gas constant (8.314 J/mol.K), and T1 and T2 are the corresponding temperatures in Kelvin.
Using the standard enthalpy of the formation of gaseous benzene, we can calculate the standard enthalpy of vaporization of benzene at 298.2 K:
ΔHvap = ΔHf°(g) - Cp,mΔT
Plugging in the values given in the problem, we get:
ΔHvap = (82.93 kJ/mol) - (81.67 J/mol.K)(353.2 K - 298.2 K)
ΔHvap = 30.8 kJ/mol
Therefore, the enthalpy of vaporization of benzene at 298.2 K is 30.8 kJ/mol.
b. To calculate the enthalpy of vaporization of benzene at its boiling point, we can use the following formula:
ΔHvap = ΔH°fus + ΔH°vap
where ΔH°fus is the enthalpy of fusion and ΔH°vap is the enthalpy of vaporization.
First, we need to calculate the enthalpy of fusion:
ΔH°fus = ΔH°f(g) - ΔH°f(l)
ΔH°fus = 82.93 kJ/mol - 32.04 kJ/mol
ΔH°fus = 50.89 kJ/mol
Next, we can calculate the enthalpy of vaporization at the boiling point:
ΔH°vap = ΔH°v(g) - ΔH°v(l)
We can assume that the entropy change during vaporization is constant, so we can use the following equation to relate the enthalpy change to the temperature change:
ΔH°vap = ΔS°vap × (Tb - T)
where ΔS°vap is the standard entropy change of vaporization, Tb is the boiling point of benzene, and T is the temperature at which we know the heat capacity.
At 298.2 K, we know that:
ΔS°vap = ΔS°g - ΔS°l
ΔS°vap = 269.9 J/mol·K - 173.2 J/mol·K
ΔS°vap = 96.7 J/mol·K
Using this value, we can calculate the enthalpy of vaporization at the boiling point:
ΔH°vap = ΔS°vap × (Tb - T) + Cp,m × (Tb - T)
ΔH°vap = 96.7 J/mol·K × (353.2 K - 298.2 K) + 81.67 J/mol·K × (353.2 K - 298.2 K)
ΔH°vap = 33.06 kJ/mol
Therefore, the enthalpy of vaporization of benzene at its boiling point
33.06 kJ/mol
learn more about enthalpy here
https://brainly.com/question/14047927
#SPJ1
what will usually happen to the precipitated over time?
Answer:
Precipitation falls to the ground as snow and rain. It eventually evaporates and rises back into the atmosphere as a gas. In clouds, it turns back into liquid or solid water, and it falls to Earth again.
Explanation:
Answer:
Precipitation is the process of a compound coming out of solution. It is the opposite of dissolution or solvation. In dissolution, the solute particles separate from each other and are surrounded by solvent molecules. In precipitation, the solute particles find each other and form a solid together
a graduate student wanted to perform this nucleophilic aromatic substitution, however the student added cyclopentadiene as a solvent. phenol was not formed. what was formed instead?
Nucleophilic aromatic substitution (NAS) is a type of reaction where a nucleophile substitutes a leaving group on an aromatic ring. In the presence of a strong nucleophile and an appropriate leaving group, phenol can be formed by NAS.
However, when cyclopentadiene is used as a solvent in NAS, it can act as a nucleophile itself and react with the electrophile, which results in the formation of a cyclopentadienyl cation. The cyclopentadienyl cation can then undergo various reactions, such as rearrangements and addition reactions with other nucleophiles, depending on the reaction conditions.
Therefore, in the presence of cyclopentadiene as a solvent, instead of phenol, other products such as cyclopentadiene adducts, rearranged cyclopentadienes, or other byproducts can be formed. It is important to carefully consider the choice of solvent in NAS reactions to ensure that it does not interfere with the desired reaction mechanism and does not lead to the formation of unwanted products.
To learn more about nucleophilic aromatic substitution refer to:
brainly.com/question/28325919
#SPJ4
What type of solution is made from a mixture that contains 184.68 g NaCl in 513 g of water at 30 oC? The solubility of sodium chloride at 30 oC is 36.0g NaCl/100g H2O.
Supersaturated
Saturated
It cannot be determined from the provided information.
Unsaturated
The answer is "Saturated". A saturated solution is in a state of dynamic equilibrium, where the rate of dissolution of the solute is equal to the rate of precipitation of the solute from the solution.
What is Saturated Solution?
A saturated solution is a solution in which the maximum amount of solute has been dissolved in the solvent at a particular temperature and pressure. In other words, no more solute can dissolve in the solvent without changing the conditions, such as increasing the temperature or pressure.
The solubility of NaCl at 30 oC is 36.0 g NaCl/100 g water.
For 513 g of water, the maximum amount of NaCl that can dissolve at 30 oC is:
(36.0 g NaCl/100 g water) x (513 g water) = 184.68 g NaCl
Since the mixture contains exactly 184.68 g NaCl, it is a saturated solution.
Learn more about Saturated from given link
https://brainly.com/question/1851822
#SPJ1
a chemist has 30% and 50% solutions of acid available. how many liters of each solution should be mixed to obtain 57.5 liters of 38% acid solution?
The volume of 30% acid solution that we need is 34.5 liters and 23 liters of 50% solution should be mixed to obtain 57.5 liters of 38% acid solution.
Let's assume that the amount of the 30% solution that we need is x. Therefore, the amount of 50% solution that we need will be (57.5 - x).
The following is the method to determine the exact volume of each solution that is needed.
30% solution: x liters
50% solution: (57.5 - x) liters
38% solution: 57.5 liters
We will now apply the formula to find the exact amount of each solution that is needed.
Volume of Acid in 30% solution + Volume of Acid in 50% solution = Volume of Acid in 38% solution
0.3x + 0.5(57.5 - x) = 0.38(57.5)0.3x + 28.75 - 0.5x = 21.85-0.2x = -6.9x = 34.5
Therefore, the volume of 30% acid solution that we need is 34.5 liters, while the volume of 50% acid solution that we need is 57.5 - 34.5 = 23 liters.
Therefore, 34.5 liters of 30% solution and 23 liters of 50% solution should be mixed to obtain 57.5 liters of 38% acid solution.
Learn more about solutions on:
https://brainly.com/question/25326161
#SPJ11
Boric acid is a triprotic acid that is used as an ant and roach killer. A 1.42-g sample of boric acid is neutralized
by 157 mL of 0.4388 M NaOH. Determine the molar mass (g/mol) for boric acid.
H2A+ 3 NaOH
NajA+ 3 H2O
The correct answer is The balanced chemical equation for the neutralization reaction between boric acid [tex](H2A)[/tex] and sodium hydroxide [tex](NaOH)[/tex]is:
[tex]H2A + 3 NaOH → Na3A + 3 H2O[/tex]
From the balanced equation, we can see that one mole of boric acid reacts with three moles of sodium hydroxide. Therefore, we need to find the number of moles of sodium hydroxide used to neutralize the given sample of boric acid, and then use the stoichiometry of the balanced equation to determine the number of moles of boric acid. The number of moles of NaOH used can be calculated as follows: moles of NaOH = (concentration of NaOH) x (volume of NaOH used) moles of NaOH = (0.4388 mol/L) x (0.157 L) moles of NaOH = 0.06886 mol According to the stoichiometry of the balanced equation, three moles of NaOH are required to neutralize one mole of boric acid. Therefore, the number of moles of boric acid can be calculated as: moles of H2A = (1/3) x (moles of NaOH) moles of H2A = (1/3) x (0.06886 mol) moles of H2A = 0.02295 mol The molar mass of boric acid can now be calculated using the formula: molar mass (g/mol) = (mass of sample) / [tex](moles of H2A)[/tex]Substituting the given values, we get: molar mass (g/mol) = (1.42 g) / (0.02295 mol) molar mass (g/mol) = 61.95 g/mol Therefore, the molar mass of boric acid is 61.95 g/mol.
To learn more about neutralization click on the link below:
brainly.com/question/27891712
#SPJ1
g 50.0 g of ice at -22.0 are added to 120.0 g of water at 7.0 in an insulated container. (a) what will be the temperature when thermal equilibrium is reached? (b) how mass of ice will be present when equilibrium is reached?
a) The temperature of the system when thermal equilibrium is reached will be 0°C.
b) 30 g of ice will be present when thermal equilibrium is reached.
mass of ice (m1) = 50.0 g
Temperature of ice (T1) = -22.0°C
Mass of water (m2) = 120.0 g
Temperature of water (T2) = 7.0°C
The energy required to melt the ice is given by the equation,
Q1 = m1 × Lf
Where, Lf is the latent heat of fusion of ice = 334 J/g
Q1 = 50.0 × 334Q1 = 16700 J
The energy required to heat the ice from -22°C to 0°C (Q2) is given by,
Q2 = m1 × c × (0-(-22))
Where, c is the specific heat capacity of ice = 2.06 J/g°C
Q2 = 50.0 × 2.06 × 22Q2 = 2266 J
The energy lost by water (Q3) is given by the equation,
Q3 = m2 × c × (7 - 0)
Where, c is the specific heat capacity of water = 4.184 J/g°C
Q3 = 120 × 4.184 × 7Q3 = 35244.48 J
Total energy gained (Q4) by ice and water is equal to the energy lost by the water.
Q4 = Q1 + Q2
Q4 = 16700 + 2266
Q4 = 18966 J
18966 = Q3 = m2 × c × (7-0)
18966 = 120 × 4.184 × 7
m2 = 18966/(120 × 4.184 × 7)
m2 = 3.03 g
At equilibrium, the mass of the remaining ice (m3) can be calculated as follows,
Q1 + Q2 = m3 × Lf + m3 × c × (0 - 0°C)
16700 + 2266 = m3 × 334 + m3 × 2.06 × (0 - (-22))
m3 = 30 g
Therefore, the temperature of the system when thermal equilibrium is reached will be 0°C, and the mass of the ice remaining at equilibrium will be 30 g.
To learn more about "equilibrium", visit: https://brainly.com/question/517289
#SPJ11
For each reaction order, identify the proper units for the rate constant, k. Not all of the choices will be used. Zero order First order Second order Third order Answer Bank M M M. ME
The rate constant k for a reaction of zero order is the ratio of concentration to time. The units for k in a zero-order reaction are M/s.The first-order reaction's rate constant k has the units of s-1. The units of k in a second-order reaction are M-1s-1. Finally, the units for k in a third-order reaction are M-2s-1.
For the zero order reaction, the units for the rate constant, k, are M/s (moles per second).
For the first order reaction, the units for the rate constant, k, are s-1 (per second).
For the second order reaction, the units for the rate constant, k, are M-1s-1 (moles per second squared).
For the third order reaction, the units for the rate constant, k, are M-2s-1 (moles squared per second).
The rate constant k varies based on the order of a reaction. For each reaction order, the appropriate units for the rate constant k are as follows:Zero order: M/sFirst order: s-1Second order: M-1s-1Third order: M-2s-1The rate law is given byRate = k[A]x[B]y[C]zWhere x, y, and z are the order of the reaction concerning the reactants A, B, and C, and k is the rate constant.
The rate constant k is unique for a particular reaction and has a fixed value for a given temperature.The reaction order determines the units of the rate constant k, which can be used to calculate the rate of reaction. The units of the rate constant k are given by the rate law's differential equation. For a reaction of order n, the differential equation of the rate law is:dn[A]/dt = -k[A]n
For more such questions on concentration
https://brainly.com/question/13616035
#SPJ11
what is the fate of carbons that enter the citric acid cycle?
When carbons enter the citric acid cycle, they are oxidized and undergo a series of reactions to produce energy in the form of ATP.
During the cycle, the carbons are completely oxidized and released as CO₂, which is exhaled by the organism. The process of citric acid cycle involves a series of enzymatic reactions that convert acetyl-CoA, the starting molecule, into various intermediates, including citrate, isocitrate, alpha-ketoglutarate, succinyl-CoA, succinate, fumarate, and malate. These reactions release electrons that are captured by electron carriers, such as NAD+ and FAD, and used to produce ATP via oxidative phosphorylation. Overall, the fate of carbons that enter the citric acid cycle is to be completely oxidized, releasing energy that can be used to fuel various cellular processes.
To learn more about citric acid visit;
https://brainly.com/question/14637256
#SPJ4
Did the valence electron theory apply on the compound SO3? Explain ( S = 16 O = 8 )
Yes, the valence electron theory applies to the compound SO₃.
The valence electron theory is used to explain the chemical bonding between atoms, based on the number of valence electrons in each atom. In SO₃, sulfur (S) has 6 valence electrons and each oxygen (O) has 6 valence electrons. According to the valence electron theory, atoms tend to form chemical bonds by either sharing electrons or transferring electrons to achieve a full outer shell of electrons (known as the octet rule).
In SO₃, sulfur and oxygen atoms share electrons to form covalent bonds, which results in the formation of a stable molecule. Specifically, each oxygen atom shares a double bond with sulfur, which allows each oxygen atom to have a full outer shell of electrons.
Therefore, the valence electron theory applies to the compound SO₃, as it helps explain the chemical bonding between sulfur and oxygen atoms in the molecule.
To learn more about valence electron refer to:
brainly.com/question/28977387
#SPJ4
Several different compounds, including SO3, have chemical bonds and characteristics that may be explained by the valence electron theory. The valence electrons of each atom in a molecule are utilized.
the valence electron theory to forecast the kinds of chemical bonds that will form between the atoms. The outermost electrons of an atom, known as the valence electrons, have a role in chemical bonding. Each oxygen (O) atom contains six valence electrons, and sulfur (S) has six as well. For each oxygen atom in SO3, sulfur produces three double bonds. This implies that each sulfur atom shares two pairs of electrons with each oxygen atom, and vice versa. According to the valence electron hypothesis, the three double bonds between sulfur and oxygen in SO3 result in a trigonal planar geometry.
learn more about SO3 here:
https://brainly.com/question/9758482
#SPJ4
When propanol (CH3CH2CH2OH) is combusted, such as when in a gasoline blend, the following reaction occurs:
2CH3CH2CH2OH(l)+9O2(g)?6CO2(g)+8H2O(g)
Based on the standard free energies of formation given in the table below, what is the standard free energy change for this reaction?
Substance ?G?f
(kJ/mol)
CH3CH2CH2OH(l) ?360.5
O2(g) 0
CO2(g) ?394.4
H2O(g) ?228.6
Express your answer to one decimal place and include the appropriate units.
Answer: -3474.2 kJ
Explanation:
2CH3CH2CH2OH(l)+9O2(g)→6CO2(g)+8H2O(g)
ΔG∘ = Products - reactants
Products: 6CO2(g)+8H2O(g)
Reactants: 2CH3CH2CH2OH(l)+9O2(g)
6 * −394.4 = -2366.4
8 * - −228.6 = -1828.8
-2366.4 + -1828.8 = -4195.2
2 * −360.5 = -721
9 * 0 = 0
-721 + 0 = -721
ΔG∘ = (-4195.2) - (-721) = -3474.2 kJ
a 53 year-old known alcoholic presents with agitation, vomiting and altered mental status. his fingerstick glucose is 148. his serum ethanol level is undetectable and his head ct is normal. an abg shows a ph of 7.21, pco2 of 34, po2 of 98 on room air. his basic chemistry panel includes a sodium of 136, potassium 4.1, chloride 108, bicarbonate 14, bun 12, creatinine 1.1. what substance are you concerned that he may have ingested
Based on the patient's age, symptoms, and laboratory results, the substance that the patient may have ingested is methanol. It is because the patient presents with altered mental status, vomiting, and a pH of 7.21.The substance are you concerned that he may have ingested is methanol.
The patient's basic chemistry panel shows a low bicarbonate level, which is a sign of metabolic acidosis. Methanol poisoning can be confirmed by measuring the serum levels of methanol. Methanol is an organic solvent that is commonly found in antifreeze, fuel, and solvents, it can be ingested accidentally or intentionally. Methanol is rapidly absorbed and metabolized in the liver to formaldehyde and formic acid, which causes severe metabolic acidosis.
Methanol is an organic solvent that is present in several substances, such as antifreeze, fuel, and solvents. Methanol poisoning can cause metabolic acidosis, which is an abnormal condition that results from an increase in the body's acidic levels. A patient presenting with a pH of 7.21, low bicarbonate levels, altered mental status, and vomiting should be suspected of methanol poisoning. The low bicarbonate level is a sign of metabolic acidosis and methanol poisoning is diagnosed by measuring the serum levels of methanol. Treatment for methanol poisoning includes supportive care, hemodialysis, and administration of fomepizole, an antidote that inhibits the metabolism of methanol. If left untreated, methanol poisoning can lead to blindness, seizures, and even death.
Learn more about methanol at:
https://brainly.com/question/14889608
#SPJ11
how many π and σ bonds are found in 3-butyn-2-one?
The number of π bonds in 3-butyn-2-one is 3, and the number of σ bonds is 6.
To count the number of π and σ bonds in the molecule, we need to first identify the multiple bonds and single bonds.
In the molecule, there is one triple bond between the carbon atoms, and one double bond between the carbon and oxygen atoms. These are all π bonds.
The remaining bonds, between the carbon and hydrogen atoms, and between the carbon and oxygen atoms (excluding the double bond) are all single bonds. These are all σ bonds.
Therefore, the molecule has 1 triple bond (which consists of 2 π bonds) and 1 double bond (which consists of 1 π bond), making a total of 3 π bonds. It also has 6 single bonds (which consist of 6 σ bonds).
To learn more about bonds visit;
https://brainly.com/question/10777799
#SPJ4
Infer imagine having a unit cell of each type of crystal lattice composed of identical atoms. How would their densities compare? Explain your reasoning.
The arrangement of the atoms inside the unit cell will determine the densities of the various forms of crystal lattices made of identical atoms. Varying atom configurations in different crystal lattices can lead to varied densities.
Explain your reasoning.As an illustration, a straightforward cubic lattice only has atoms at the corners, and each corner atom is shared by eight unit cells. As the cube of the edge length determines the volume of the unit cell, the volume of the unit cell is equal to a3, where an is the length of the edge. As there is only one atom per corner, the unit cell contains one atom, and its mass is determined by the product of the number of atoms and the atomic mass. Hence, the density of a straightforward cubic lattice is
density = mass/volume = (atomic mass)/(a^3)
to know more about densities here:
brainly.com/question/29775886
#SPJ9
Suppose your sample of magnesium was contaminated with an equal weight of MgCl2. How would the contamination affect the change in enthalpy for the Mg–HCl reaction? Justify your answer
1350 ml of neon is heated from 170k to a final volume of 2000ml. What is the final temperature?
24.1 K is the final temperature.
We must utilise the ideal gas law to solve for the final temperature because the volume is changing. The ideal gas law's formula is PV = nRTPV = nRT, where P is for pressure, V is for volume, n is for moles of gas, R is for the gas constant, and T is for temperature.
Since the number of moles is constant, we can rearrange the equation to solve for temperature:
[tex]T = (\frac{PV}{nR})[/tex]
In this case, P = 1 atm, V1 = 1.35 L, V2 = 2 L, n = 1 mol, and R = 0.0821 L-atm/K-mol.
[tex]T2 = (\frac{P (V2 - V1) }{ nR}) \\T2 = (\frac{1 (2 - 1.35) }{ 0.0821}) \\T2 = 24.1 K[/tex]
Therefore,The Final Temperature is 24.1K
learn more about Final Temperature Refer:brainly.com/question/11050215
#SPJ1
does your melting point obtained for your product indicate that your sample is indeed phenacetin? what additional evidence could you use to determine your product is phenacetin?
The melting point obtained for the product is an indication that the sample is phenacetin. To determine that the product is phenacetin, other supporting evidence may include elemental analysis and infrared spectroscopy
Melting point tests are utilized in the identification and characterization of organic compounds. The melting point of a sample is determined by heating it at a steady rate until it begins to liquefy, and the temperature at which it starts to melt is taken as the melting point of the sample. The melting point of a solid, including phenacetin, is usually given in reference books.
The fact that the sample has the same melting point as that given for phenacetin in reference books suggests that it is indeed phenacetin. To further confirm that the product is phenacetin, additional tests such as elemental analysis or infrared spectroscopy could be carried out. These tests can provide additional evidence to support the identification of the product.
Learn more about melting point tests at:
https://brainly.com/question/29679674
#SPJ11
) the student proposes to perform another titration using a 0.139 g sample of h2c2o4 , but this time using 0.00143 m kmno4(aq) in the buret. would this titrant concentration be a reasonable choice to use if the student followed the same procedure and used the same equipment as before? justify your response.
If the student followed the same procedure and used the same equipment as before, then 0.00143 M [tex]KMnO_{4}[/tex](aq) in the burette would not be a reasonable choice for a titrant concentration.
Thus, the correct answer is "No, it would not".
The reаson why 0.00143 M [tex]KMnO_{4}[/tex](аq) in the burette would not be а reаsonаble choice for а titrаnt concentrаtion is the molаrity of the [tex]KMnO_{4}[/tex] the solution in the burette must be increаsed to decreаse the volume of the solution required for oxidаtion. This is becаuse oxаlic аcid, which is а weаk orgаnic аcid, requires а strong oxidizing аgent such аs [tex]KMnO_{4}[/tex] to reаct.
It is importаnt to note thаt а minimum of 5-6 mL of [tex]KMnO_{4}[/tex] is required for the complete oxidаtion of 0.1 grаms of oxаlic аcid. Аs а result, if the concentrаtion of [tex]KMnO_{4}[/tex] is decreаsed, more [tex]KMnO_{4}[/tex] will be required to complete the oxidаtion of [tex]H_{2}C_{2}O_{4}[/tex]H2C2O4. Аs а result, а higher volume of the solution would be required to reаch the endpoint.
For more information about titrant concentration refers to the link: https://brainly.com/question/29725887
#SPJ11
Two objects are moving at the same speed. Which (if any) of the following statements about them are true? Check all that apply. The de Broglie wavelength of the heavier object is longer than that of the lighter one. If one object has twice as much mass as the other, its wavelength is one-half the wavelength of the other. Doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed
The correct options are B and C i.e., if one object has twice as much mass as the other, its wavelength is half the wavelength of the other and doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed.
An object's de Broglie wavelength will vary predictably as its mass or velocity changes.
The de Broglie wavelength of an object is given by the formula λ = h/p, where λ is the wavelength, h is Planck's constant, and p is the momentum of the object. Momentum is given by the formula p = mv, where m is the mass of the object and v is its velocity.
Given that two objects are moving at the same speed, their velocities are equal, and their momenta are directly proportional to their masses. Therefore, we can make the following observations about their de Broglie wavelengths:
The de Broglie wavelength of the heavier object is shorter than that of the lighter one. This is because the momentum of the heavier object is greater than that of the lighter one, and the de Broglie wavelength is inversely proportional to the momentum.
If one object has twice as much mass as the other, its wavelength is half the wavelength of the other. This is because the momentum of the heavier object is twice that of the lighter one, and the de Broglie wavelength is inversely proportional to the momentum.
Doubling the mass of one of the objects will have the same effect on its wavelength as does doubling its speed. This is because both changes result in a doubling of the momentum of the object, and the de Broglie wavelength is inversely proportional to the momentum.
In summary, the de Broglie wavelength of an object is inversely proportional to its momentum, which is directly proportional to its mass and velocity. Therefore, changes in the mass or velocity of an object will have a predictable effect on its de Broglie wavelength.
To learn more about wavelength refer to:
brainly.com/question/27353508
#SPJ4
Rank the following electron-pair geometries by increasing steric number. Items (5 items) (Drag and drop into the appropriate area) Items in order Highest Steric No. linear trigonal planar 1 trigonal bipyramidal octahedral 2. tetrahedral
Following are the ranks of electron-pair geometries by increasing steric number: linear, trigonal Planar, Trigonal Bipyramidal, Tetrahedral, and Octahedral.
These are discussed in detail below:
1. Linear (Steric Number 2)
2. Trigonal Planar (Steric Number 3)
3. Trigonal Bipyramidal (Steric Number 4)
4. Tetrahedral (Steric Number 4)
5. Octahedral (Steric Number 5)
The steric number of an electron-pair geometry indicates the number of bonds and lone pairs of electrons in the shape. The steric number of an electron-pair geometry increases as more bonds and lone pairs of electrons are added.
Linear electron-pair geometries, such as linear geometry, have the lowest steric number, while shapes with more electron pairs, such as octahedral and trigonal bipyramidal geometries, have higher steric numbers.
The linear geometry has two electron pairs, the trigonal planar geometry has three electron pairs, the trigonal bipyramidal geometry has five electron pairs, the octahedral geometry has six electron pairs, and the tetrahedral geometry has four electron pairs.
Thus, the rank of electron-pair geometries by increasing steric number is linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral.
To know more about steric numbers refer here:
https://brainly.com/question/29401030#
#SPJ11
Complete Question:
Rank the following electron-pair geometries by increasing steric number.
1. linear
2. trigonal planar
3. trigonal bipyramidal
4. octahedral
5. tetrahedral
pre-lab calculation: how much titrant will be required in step 5 if your edta titrant is exactly 0.01000 m and you weighed out exactly 0.4000 g calcium carbonate when you made your standard?
399.7 mL of EDTA will be required in step 5 if your edta titrant is exactly 0.01000 m and you weighed out exactly 0.4000 g calcium carbonate .
Let's first write down the reaction that occurs between EDTA and calcium carbonate.
[tex]EDTA^4^-+ CaCO_3 = Ca[/tex]
[tex]EDTA^-[/tex] = [tex]CO_3^2^- + H_2O^+ +OH^-[/tex]
In the above reaction, one[tex]EDTA^4^-[/tex] reacts with one[tex]CaCO_3[/tex] to form one [tex]CaEDTA^-[/tex]
This means that the number of moles of EDTA used is the same as the number of moles of [tex]CaCO_3[/tex] present in the sample.
We can use the following formula to calculate the moles of [tex]CaCO_3[/tex] present in the sample:
mols [tex]CaCO_3[/tex]= mass of [tex]CaCO_3[/tex] ÷ molar mass of [tex]CaCO_3[/tex]
We can use the following formula to calculate the number of moles of EDTA required to react with the [tex]CaCO_3[/tex]present in the sample:
mols EDTA = mols [tex]CaCO_3[/tex]
Therefore, the number of moles of EDTA required to react with 0.4000 g [tex]CaCO_3[/tex] is:
mols [tex]CaCO_3[/tex] = mass of [tex]CaCO_3[/tex] ÷ molar mass of [tex]CaCO_3[/tex]
mols [tex]CaCO_3[/tex] =0.4000 ÷100.09 = 0.003997 mols
EDTA = mols
[tex]CaCO_3[/tex]= 0.003997
The volume of EDTA required to react with this amount of [tex]CaCO_3[/tex] is given by the following formula:
[tex]V = n[/tex]÷[tex]C_V[/tex] = 0.003997 ÷0.01000 = 0.3997 L = 399.7 mL
Therefore, 399.7 mL of EDTA titrant is required to react with 0.4000 g of calcium carbonate.
To know more about EDTA refer here :
https://brainly.com/question/4304901
#SPJ11
oxides of copper include cuo and cu2o. you heat 1.51 g of one of these copper oxides in the absence of air and obtain 1.21 g of cu. true or false: you must have had cuo.
he three radioactive series that occur in nature end with what element? the three radioactive series that occur in nature end with what element? bi pb po hg u g
The three radioactive series that occur in nature end with three different elements. These elements are Bismuth (Bi), Lead (Pb), and Polonium (Po). The correct options are a, b, and c.
Bismuth (Bi) is the most stable element of the three and has a half-life of 19 billion years. Lead (Pb) is the next most stable, with a half-life of 22 million years. Polonium (Po) has the shortest half-life of the three, at only 138 days.
Radioactive decay is the process by which an unstable atom loses energy. During this process, the atom's nucleus splits into two or more parts, releasing gamma rays, subatomic particles, or alpha and beta particles. Radioactive decay also causes the atom to transmute into a different element.
When atoms of an unstable element undergo radioactive decay, they move along a decay chain, forming a series of different elements. The three radioactive series that occur in nature all start with Uranium and Thorium and end with Bismuth, Lead, and Polonium. These are known as the Uranium-238, Thorium-232, and Actinium-228 series, respectively.
In conclusion, the three radioactive series that occur in nature end with Bismuth (Bi), Lead (Pb), and Polonium (Po).
To know more about radioactive series, refer here:
https://brainly.com/question/4189425#
#SPJ11
7. the mass percent of phosphoric acid in cola has been reported to be 0.075y mass. how does your answer compare to this value (use percent difference to make this comparison)?
To compare your answer to the reported mass percent of phosphoric acid in cola (0.075y mass), use the percent difference formula:
Percent Difference = (|Your Value - Reported Value| / (Your Value + Reported Value) / 2) * 100
1. Insert the calculated mass percent of phosphoric acid in place of "Your Value" in the formula.
2. Substitute 0.075y mass for "Reported Value".
3. Calculate the absolute difference between your value and the reported value.
4. Divide the absolute difference by the average of your value and the reported value.
5. Multiply the result by 100 to get the percent difference.
By following these steps, compare the answer to the reported mass percent of phosphoric acid in cola using percent difference.
Learn more about mass percent here: https://brainly.com/question/17704762
#SPJ11
18.
The bonding in calcium nitrate is ionic, with Ca²+ and NO₂ ions present.
Using a diagram, or otherwise, explain how the ions interact with water when
forming a solution.
[2]
17.
(a) Explain the term electronegativity.
(b) The table gives some electronegativity values.
Atom
Electronegativity
Al
1-61
Be
1-57
H Mg
2-20 1-31
N
S
3.04 2-59
[1]
Select the two atoms from the list which would give the most polar bond when
[1]
combined.
Answer:
18
When calcium nitrate dissolves in water, the ionic bonds between the Ca²+ and NO₂ ions are broken due to the polarity of water molecules. The oxygen atoms of the water molecules have a partial negative charge while the hydrogen atoms have a partial positive charge. When Ca²+ ions are surrounded by water molecules, the partial negative charges on the oxygen atoms of water molecules interact with the positively charged Ca²+ ions through electrostatic attraction, forming a hydrated Ca²+ ion. Similarly, the partial positive charges on the hydrogen atoms of water molecules interact with the negatively charged NO₂ ions, forming hydrated NO₂ ions. The resulting solution consists of hydrated Ca²+ and NO₂ ions, dispersed evenly throughout the water.
17
(a) Electronegativity is a measure of an atom's ability to attract electrons towards itself when it is bonded to another atom. It is a relative scale, with the most electronegative element, fluorine, assigned a value of 4.0.
(b) The two atoms that would give the most polar bond when combined are Al and N. This is because they have the largest difference in electronegativity values, which is a measure of the polarity of a bond. The electronegativity difference between Al and N is 1.43, which is larger than any other combination of atoms given in the table
Identify the following salts as neutral, acidic, or basic. Drag each item to the appropriate bin.1. LiF2. SrBr23. NH4CN4. NH4Br5. KCN6. NH4ClO47. LiNO3A. Neutral salts.B. Acidic salts.C. Basic salts.
In general, salts can be classified as neutral, acidic, or basic based on the nature of the anion and cation that make up the salt. Anions are negatively charged ions, while cations are positively charged ions. When a salt is dissolved in water, the anion and cation separate and interact with the water molecules to form an aqueous solution.
Neutral salts are those that do not contain any acidic or basic ions, and the pH of their aqueous solutions is close to 7. An example is SrBr2, which is made up of the neutral Sr2+ cation and the neutral Br- anion.
Acidic salts are those that contain acidic ions, which can donate protons to water molecules and lower the pH of their aqueous solutions. NH4CN and NH4ClO4 are examples of acidic salts, as they contain the ammonium ion (NH4+), which can act as a weak acid.
Basic salts are those that contain basic ions, which can accept protons from water molecules and raise the pH of their aqueous solutions. LiF and KCN are examples of basic salts, as they contain the fluoride ion (F-) and the cyanide ion (CN-), respectively, which can act as weak bases.
In summary, the classification of a salt as neutral, acidic, or basic depends on the nature of the ions that make up the salt and their behavior in aqueous solution.
For more details about neutral click here:
https://brainly.com/question/27891712#
#SPJ11
positive tests in the fermentation tests turned the test media from red to yellow. why does this color change occur?
The color change observed during fermentation tests, where the test media turns from red to yellow, is due to the production of acids by the fermenting microorganisms. '
Fermentation is a process where microorganisms, such as bacteria or yeast, break down carbohydrates into simpler compounds, usually alcohol and carbon dioxide, without using oxygen. During fermentation, these microorganisms produce organic acids, such as lactic acid, acetic acid, or formic acid, as byproducts.
The test media used in fermentation tests typically contain a pH indicator, such as bromothymol blue or phenol red, which changes color in response to changes in pH. These pH indicators are usually red when the pH is neutral or basic, but turn yellow when the pH becomes acidic. Therefore, when microorganisms ferment carbohydrates and produce acids, the pH of the test media decreases, causing the pH indicator to turn yellow.
For example, in the fermentation test for glucose, a carbohydrate source, bacteria such as Escherichia coli ferment glucose and produce acidic byproducts such as lactic acid and acetic acid. As these acids accumulate, the pH of the test media drops, and the pH indicator turns from red to yellow, indicating that fermentation has occurred.
In summary, the color change observed during fermentation tests from red to yellow is due to the production of acids by the fermenting microorganisms, which causes a decrease in pH, leading to the pH indicator changing color.
Learn more about fermentation here brainly.com/question/13050729
#SPJ4