Answer:
p.e=mgh
where m=10kg
g=10m/s(constant)
h=20m
p.e=10x20x10
p.e=2000joules
what does it mean mechanical advange is less than one?
Answer:
this happens when the input force is greater than the output force
HOPE IT HELPED YOU...
______________ rock forms beneath Earth's surface.
Answer:
Igneous rocks form beneath Earth's surface.
Explanation:
Igneous rocks form beneath the Earth's surface
4. Prove that:
a.
The unit of pressure is a derived unit.
Explanation:
The pascal (symbol: Pa) is the SI derived unit of pressure used to quantify internal pressure, stress, Young's modulus and ultimate tensile strength. It is defined as one newton per square metre. It is named after the French polymath Blaise Pascal
Which of these BEST explains how Earth's surface features are formed by moving tectonic plates? *
5 points
Earth's gravity acts as an opposing force, causing the crust to push upward, break into individual plates, and move along the surface.
The minerals in lithospheric plates are attracted to Earth's magnetic poles, which causes them to move along the surface.
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's crust is separated into individual plates that float on top of molten material, convection currents in the mantle cause them to slowly move.
Answer: The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
Earth's surface forms because of this reason:
The spinning of Earth's outer core causes the lithosphere to break into individual plates and collide with each other.
It is required to design a zener shunt regulator to provide a regulated voltage of about 10 V. The available 10-V, 1-W zener of type 1N4740 is specified to have a 10-V drop at a test current of 25 mA. At this current, its r z is 7 . The raw supply, V S , available has a nominal value of 20 V but can vary by as much as ±25%. The regulator is required to supply a load current of 0 mA to 20 mA. Design for a minimum zener current of 5 mA.
Answer:
jgfsdghjjuk
Explanation:
khhnghjj
The changes that are visible during a chemical reaction are signs that the nuclei in the reactants have been rearranged.
Please select the best answer from the choices provided
ОТ
OF
Answer:
the answer is F
Explanation: I put T on the question and got it wrong so it's F on edge ;)
a dog walks 14 meters to the east and then 20 meters back to the west.
Answer:
who gets theses questions XD
Explanation:
A car travels 30 m in 5 seconds. After accelerating for 3 seconds, it travels 20 m in 2 seconds. The cars acceleration is ___m/s
Explain Kinetic and potential energy
Answer:
Energy implies as the object’s capability to perform work. It is something that cannot be created or destroyed but can only be transformed. An object loses its energy, when it performs work, whereas it gains energy when the work is performed on it. Energy is broadly classified as kinetic energy and potential energy. While kinetic energy is the energy which an object contains because of a particular motion.
On the other hand, potential energy is the stored energy, because of its state of rest. As both the two forms of energy are measured in joules, people get easily confused between these two. So, take a read of the article which will help you to understand the differences between kinetic and potential energy.
Explanation:
Hope this helps - Good luck ^w
Answer:
Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.
Explanation:
A swimmer sets off headed west at 0.40 m/s directly towards the opposite shore of a swift river. The swimmer makes it to the opposite shore 30 meters downstream of their expected position. If the river is 7.5 meters wide, what is the velocity of the water relative to the shore?
Answer:
Explanation:
River is 7.5 m wide . Time taken by it cover this displacement
= displacement / velocity
= 7.5 / 0.4
= 18.75 s
During this period , swimmer will have a displacement of 30 m due to velocity of river water .
Displacement of 30 m downstream will be due to flow of river .
velocity of water flow = displacement / time
= 30 / 18.75
= 1.6 m /s
If the radio waves that are sent from the speed gun have a frequency of 400,000,002 Hz and the radio waves reflected off an approaching car have a frequency of 400,000,109 Hz, what is the speed of the car? (Hz is the SI unit of frequency, equal to cycles per second).
Answer:
40.1 m/s or 144.36 km/h
Explanation:
The equation is (v=∆ f/f) x (c/2)
V is velocity
delta f is returned frequency minus intial frequency divided by the initial frequency
c is the speed of light in m/s divided by 2
v= (400,000,109 Hz - 400,000,002 Hz)/400,000,002Hz x (299,792,458 m/s)/2
Which of these is formed by a hot spot in Earth's crust?
Answer:
we need to know what the choices are?
Explanation:
Answer:
A hot spot is a region deep within the Earth's mantle from which heat rises through the process of convection. This heat facilitates the melting of rock. The melted rock, known as magma, often pushes through cracks in the crust to form volcanoes.
Se lanza una piedra de 3.00 N verticalmente hacia arriba desde el suelo. Se observa que, cuando está 15.0 m sobre el suelo, viaja a 25.0 m/s hacia arriba. Use el teorema trabajo-energía para determinar a) su rapidez en el momento de ser lanzada. b) su altura máxima
Answer:
(a). The speed at the moment of being thrown is 30.41 m/s.
(b). The maximum height is 47.18 m.
Explanation:
Given that,
Weight of stone = 3.00 N
Height = 15 m
Speed = 25.0 m/s
(a). We need to calculate the speed at the moment of being thrown
Using work energy theorem
[tex]W=\dfrac{1}{2}m(v_{2}^2-v_{1}^2)[/tex]
[tex]-mg\times d=\dfrac{1}{2}m(v_{2}^2-v_{1}^2)[/tex]
Put the value into the formula
[tex]-9.8\times15=\dfrac{1}{2}\times(v_{2}^2-v_{1}^2)[/tex]
[tex]-2\times9.8\times15=25^2-v_{1}^2[/tex]
[tex]-v_{1}^2=-300-25^2[/tex]
[tex]v_{1}=\sqrt{925}[/tex]
[tex]v_{1}=30.41\ m/s[/tex]
(b). We need to calculate the maximum height
Using work energy theorem
[tex][tex]W=\dfrac{1}{2}mv_{2}^2-\dfrac{1}{2}mv_{1}^2[/tex]
[tex]mg\times d=\dfrac{1}{2}mv_{2}^2-\dfrac{1}{2}mv_{1}^2[/tex]
Here, [tex]\dfrac{1}{2}mv_{2}^2[/tex]=0
[tex]-(mg)\times d=\dfrac{1}{2}mv_{1}^2[/tex]
[tex]d=\dfrac{v_{1}^2}{2g}[/tex]
Put the value into the formula
[tex]d=\dfrac{30.41^2}{2\times9.8}[/tex]
[tex]d=47.18\ m[/tex]
Hence, (a). The speed at the moment of being thrown is 30.41 m/s.
(b). The maximum height is 47.18 m.
A car is initially moving at 10.5 m/s and accelerates uniformly to reach a speed of 21.7 m/s in 4.34 s. How far did the car move during this acceleration?
A. 69.9m
B. 6.99m
C. 69.6m/s
D. 6.99m/s
Answer:
A. 69.9m
Explanation:
Given parameters:
Initial velocity = 10.5m/s
Final velocity = 21.7m/s
Time = 4.34s
Unknown:
Distance traveled = ?
Solution:
Let us first find the acceleration of the car;
Acceleration = [tex]\frac{v - u}{t}[/tex]
v is final velocity
u is initial velocity
t is the time
Acceleration = [tex]\frac{21.7 - 10.5}{4.34}[/tex] = 2.58m/s²
Distance traveled;
V² = U² + 2aS
21.7² = 10.5² + 2 x 2.58 x S
360.64 = 2 x 2.58 x S
S = 69.9m
Which type of energy is stored in a battery?
O A. Nuclear energy
O B. Electrical energy
O C. Electromagnetic energy
O D. Chemical energy
Answer:
Chemical energy is in a battery
The type of energy is stored in a battery is Chemical energy (option d)
Batteries store chemical energy. When a battery is charged, a chemical reaction occurs inside it, converting the reactants into different products. This process stores energy in the form of chemical bonds within the battery's components.
When you use the battery to power a device, the reverse chemical reaction takes place, releasing the stored energy as electrical energy. This flow of electrons creates an electric current that powers the device connected to the battery.
The capacity of a battery to store and release energy depends on the type and quantity of chemicals used in its construction. Different types of batteries, such as alkaline, lithium-ion, or lead-acid batteries, have varying chemical compositions, affecting their energy storage capabilities and overall performance.
So, the correct option is (d).
To know more about energy here
https://brainly.com/question/1932868
#SPJ6
HURRRY PLEASSSSEEE
Energy required for cellular respiration can be processed from ____.
A) Carbohydrates
B) Fats/ Lipids
C) Proteins
D) All of the above
Answer:
fats / liquids or proteins one of them
Explanation:
..........
Answer:
D) All of the above
Explanation:
I googled it :)
7. A solid wax candle has a volume of 1,700 mL. The candle has a mass of 1.5 kg (1,500 g). What is the
density of the candle?
Answer:
The answer is 0.88 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 1500 g
volume = 1700 mL
We have
[tex]density = \frac{1500}{1700} = \frac{15}{17} \\ = 0.88235294...[/tex]
We have the final answer as
0.88 g/mLHope this helps you
Answer:
0.88
Explanation:
density = mass/volume
density = 1500/1700
density = 0.88
What is the wavelength of a wave with a frequency of 466 Hz and a speed of
343 m/s?
A. 1.35 m
B. 0.74 m
C. 1.6 x 105 m
D. 6.25 x 10-6 m
Answer:
The answer is option BExplanation:
The wavelength of a wave can be found by using the formula
[tex] \lambda = \frac{c}{f} \\ [/tex]
where
c is the speed of the wave
f is the frequency
From the question
c = 343 m/s
f = 466 Hz
We have
[tex] \lambda = \frac{343}{466} \\ = 0.73605150...[/tex]
We have the final answer as
0.74 mHope this helps you
Answer: B: 0.74 m
Explanation:
Hope this helps / I did this question.
HI CAN ANYONE PLS ANSWER DIS PLS!!!!!!
Answer:
Volume of an object (L): blue 105.00, yellow 105.00, green 102.50, red 101.25
Density of an object (kg/L) Mass / Volume: blue 1, yellow 1, green 1.014, red .992
Sink or Float: blue sink, yellow sink, green float, red float
hope this helps
Q7 Describe two types of atomic change that produce electromagnetic
waves.
Anyone get this can you please help me, can you also please do it step by step
Answer:
7.69 hours
Explanation:
3 hr/ 1000mi x 130mi = 7.69 hours or 7.7 hours
A doctor takes an x-ray of your body this is an example of conduction, convection, radiation?
Answer:
RadiationExplanation:
An x-ray emits radiation to see through the outer part of your body.
Hope this helps! <3
An X-ray is a type of radiation which is a type of electromagnetic radiation in the electromagnetic spectrum.
What is electromagnetic spectrum?
The electromagnetic spectrum consists of electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.There are 7 types of electromagnetic radiation in the electromagnetic spectrum.Gamma rays have the highest energy while radio waves have least energy.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
________are muscles connected to the skeleton.
1.) Smooth muscles
2.) Skeletal muscles
3.) Strong muscles
4.) Cardiac muscles
Answer: Skeletal Muscles
Explanation:
Skeletal muscles are attached to the skeleton by tough connective tissues called tendons
Explain experimental physics.
Answer:
This is a category of physics dealing with the observable phenomena, and experimental aspects by investigation, and scientific testing to measure the properties of matter, and energy.
Answer:
Experimental physics is the category of disciplines and sub-disciplines in the field of physics that are concerned with the observation of physical phenomena and experiments.
I hope you helped^_^
Follow me for more answersAn athlete starts running from rest such that he covers a distance of 5mm in 0.50s with a constant change in velocity per unit time . when will he reach the finish line, if he is running a race of 50m?
Answer:
50 s
Explanation:
Given:
Δx = 0.005 m
v₀ = 0 m/s
t = 0.50 s
Find: a
Δx = v₀ t + ½ at²
0.005 m = (0 m/s) (0.50 s) + ½ a (0.50 s)²
a = 0.04 m/s²
Given:
Δx = 50 m
v₀ = 0 m/s
a = 0.04 m/s²
Find: t
Δx = v₀ t + ½ at²
50 m = (0 m/s) t + ½ (0.04 m/s²) t²
t = 50 s
A 4kg block and a 2kg block can move on horizontal frictionless surface. The blocks are accelerated by a +12-N force that pushes the large block against the smaller one.'
a) Determine the force that the 2kg block exerts on the 4kg block
b) Determine the force that the 4kg block exerts on the 2kg block.
Answer:
a) -4 N
b) +4 N
Explanation:
Draw a free body diagram for each block.
For the large block, there are 2 forces: 12 N pushing to the right, and F pushing to the left.
For the small block, there is 1 force, F pushing to the right.
There are also weight and normal forces in the vertical direction, but we can ignore those.
Sum of forces on the large block in the x direction:
∑F = ma
12 − F = 4a
Sum of forces on the small block in the x direction:
∑F = ma
F = 2a
2F = 4a
Substitute:
12 − F = 2F
12 = 3F
F = 4
The small block pushes on the large block 4 N to the left (-4 N).
The large block pushes on the small block 4 N to the right (+4 N).
An____ collision occurs when an arrow hits the target.
Answer:
I think it's An inelastic collision occurs when an arrow hits the target because when the arrow hits it, the target and the arrow do not bounce away from each other.
Explanation:
A car is traveling down the highway cruise control at 50m/s (this means its is traveling with a constant velocity NOT accelerating). If it does this for 5 minutes (300s), how far does it travel?
Given parameters:
Speed of car = 50m/s
Time of travel = 5minutes (300s)
Unknown;
Distance of travel = ?
To solve this problem, we need to understand how speed relates with distance and time.
Speed is a physical quantity. It is the distance traveled divided by time taken.
Speed = [tex]\frac{distance}{time}[/tex]
So,
Distance = speed x time
Input the parameters and solve for the distance;
Distance = 50m/s x 300s
Distance = 15000m
The distance covered during this time interval and speed is 15000m
A truck traveling at a velocity of 33m/s comes to a halt by decelerating at 11m/s^2. How far does the truck travel in the process of stopping. identify known variables such as V, V0, a, t, and delta x.
Answer:
The truck was moving 16.5 m/s during the time it took to stop, which was 3 seconds.
Initial velocity = 33 m/sFinal velocity = 0 m/sAverage velocity = (33 + 0) / 2 m/s = 16.5 m/sExplanation:
First, how long does it take the truck to come to a complete stop?( 33 m/s ) / ( 11 m / s^2 ) = 3 secondsThen we can look at the average velocity between when the truck started decelerating and when it came to a complete stop. Because the deceleration is constant (always 11m/s^2) we can use this trick.The time taken to stop the truck is 3 seconds. The final velocity is zero. Then, the distance travelled by the truck is 49.5 m.
What is acceleration ?Acceleration is a physical quantity that, measures the rate of change in velocity. It is a vector quantity thus having both magnitude and direction. It can be defines as the ratio of change in velocity to the change in time.
Given initial velocity = 13.5 m/s
final velocity is zero since the bicycle is stopping.
then Δt = Δv/a
Δt = 33 m/s/ 11 m/s² = 3 seconds.
Hence, the truck will take 3 s to complete stop.
The distance covered within this time can be determined using the equation as follows:
s = u t + 1/2 at²
where u is the initial velocity
The acceleration a = - 11 m/s² the minus sign is due to deceleration.
s = (33m/s × 3 s) + (-11 m/s² ×3 s ×3 s) = 49.5 m.
Therefore, the truck will travel up to 49.5 m before stopping.
Find more on acceleration:
http://brainly.com/question/2303856
#SPJ2
how much faster will a car be going if it accelerates at 1 m/s/s for a total of 60 seconds.
Answer:
Vf = 60 [m/s]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]v_{f}= v_{i}+(a*t)[/tex]
where:
Vf = final velocity [m/s]
Vi = initial velocity = 0
a = acceleration = 1 [m/s^2]
t = time = 60 [m]
Now replacing:
Vf = 0 + (1*60)
Vf = 60 [m/s]