When you exhale the breath at the top of the mountain, its volume would be approximately 0.000197 m³.
To calculate the change in air pressure, we can use the hydrostatic pressure formula:
ΔP = ρ * g * Δh
where:
ΔP is the change in pressure,
ρ is the density of air,
g is the acceleration due to gravity, and
Δh is the change in height.
Given:
ρ = 1.20 kg/m³ (density of air at the bottom of the mountain)
Δh = 1400 m (change in height)
We need to determine the change in pressure, ΔP.
Let's calculate it:
ΔP = 1.20 kg/m³ * 9.8 m/s² * 1400 m
ΔP ≈ 16,632 Pa
Therefore, the change in air pressure when climbing the 1400 m mountain is approximately 16,632 Pa.
Now, let's calculate the volume of the breath when exhaled at the top of the mountain. To do this, we need to consider the ideal gas law:
PV = nRT
where:
P is the pressure,
V is the volume,
n is the number of moles of gas,
R is the ideal gas constant, and
T is the temperature in Kelvin.
Given:
V = 0.500 L = 0.500 * 0.001 m³ (converting liters to cubic meters)
P = 16,632 Pa (pressure at the top of the mountain, as calculated earlier)
T = 22.0 °C = 22.0 + 273.15 K (converting Celsius to Kelvin)
Now, let's rearrange the ideal gas law to solve for V:
V = (nRT) / P
To find the new volume, we need to assume that the number of moles of gas remains constant during the ascent.
[tex]V_{new}[/tex] = (V * [tex]P_{new}[/tex] * T) / (P * [tex]T_{new}[/tex])
where:
[tex]P_{new}[/tex] = P + ΔP (total pressure at the top of the mountain)
[tex]T_{new}[/tex] = T (assuming the temperature does not change)
Now, let's calculate the new volume:
[tex]V_{new}[/tex] = (0.500 * 0.001 m³ * (16,632 Pa + 0)) / (16,632 Pa * (22.0 + 273.15) K)
[tex]V_{new}[/tex] ≈ 0.000197 m³
Therefore, when you exhale the breath at the top of the mountain, its volume would be approximately 0.000197 m³.
To learn more about ideal gas law visit:
brainly.com/question/30458409
#SPJ11
An alien spaceship, moving at constant velocity, traverses the solar system (a distance of 10.50 light-hours) in 15.75 hr as measured by an observer on Earth. Calculate the speed of the ship (as measured by an observer on Earth), and the time interval that an observer on the ship measures for the trip. A. v = 0.500c, At' = 11.7 hr B. v = 0.667c, At' = 11.7 hr C. v = 0.887c, At = 21.1 hr D. v = 0.995c, Ať = 21.1 hr E. None of the above
Correct option is B. The speed of the alien spaceship, as measured by an observer on Earth, is approximately 0.667 times the speed of light (c). The time interval that an observer on the ship measures for the trip is approximately 11.7 hours.
In order to calculate the speed of the spaceship, we can use the formula v = d/t, where v is the velocity, d is the distance, and t is the time. In this case, the distance is 10.50 light-hours and the time is 15.75 hours. Plugging in these values, we get v = 10.50 light-hours / 15.75 hours = 0.667 times c.
To find the time interval that an observer on the spaceship measures for the trip, we can use the time dilation formula t' = t / √(1 - (v^2/c^2)), where t' is the time interval as measured on the spaceship, t is the time interval as measured on Earth, v is the velocity of the spaceship, and c is the speed of light. Plugging in the values we have, t = 15.75 hours and v = 0.667 times c, we can calculate t' = 15.75 hours / √(1 - (0.667^2)) = 11.7 hours.
Therefore, the correct answer is B. The speed of the ship, as measured by an observer on Earth, is approximately 0.667c, and the time interval that an observer on the ship measures for the trip is approximately 11.7 hours.
Learn more about speed of light here:
https://brainly.com/question/28224010
#SPJ11
1. A sphere made of wood has a density of 0.830 g/cm³ and a radius of 8.00 cm. It falls through air of density 1.20 kg/m³ and has a drag coefficient of 0.500. What is its terminal speed (in m/s)?
2. From what height (in m) would the sphere have to be dropped to reach this speed if it fell without air resistance?
The height from which the sphere must be dropped without air resistance to reach a speed of 3.89 m/s is 0.755 m.
Density of sphere (ρs) = 0.830 g/cm³
Radius of sphere (r) = 8.00 cm
Air density (ρa) = 1.20 kg/m³
Drag coefficient (Cd) = 0.500
The terminal speed of a sphere is the constant speed that it attains when the force due to the air resistance becomes equal and opposite to the gravitational force acting on it.
So, the following formula can be used:
mg - (1/2)CdρAv² = 0
where,
m is the mass of the sphere.
g is the acceleration due to gravity.
ρ is the air density.
A is the area of the cross-section of the sphere facing the direction of motion.
v is the terminal speed of the sphere.
In order to calculate the terminal speed of the sphere, we need to calculate the mass and the cross-sectional area of the sphere. We can use the given density and radius to calculate the mass of the sphere as follows:
Volume of sphere = (4/3)πr³
Mass of sphere = Density x Volume= 0.830 g/cm³ x (4/3)π x (8.00 cm)³= 1432.0 g
The area of the cross-section of the sphere can be calculated as follows:
Area of circle = πr²
Area of sphere = 4 x Area of circle= 4πr²= 4π(8.00 cm)²= 804.25 cm²= 0.080425 m²
Substituting the given values in the above formula, we get:
mg - (1/2)CdρAv² = 0v = √[2mg/(CdρA)]
Substituting the values, we get:
v = √[2 x 0.001432 kg x 9.81 m/s² / (0.500 x 1.20 kg/m³ x 0.080425 m²)]
v = 3.89 m/s
Therefore, the terminal speed of the sphere is 3.89 m/s.
Now, let's calculate the height from which the sphere must be dropped to reach this speed without air resistance. We can use the following formula:
mgΔh = (1/2)mv²
where,
Δh is the height from which the sphere must be dropped without air resistance.
The mass of the sphere is given as 0.001432 kg.
We can use this to find the height as follows:
Δh = v²/(2g)
Δh = (3.89 m/s)² / (2 x 9.81 m/s²)
Δh = 0.755 m
Therefore, the height from which the sphere must be dropped without air resistance to reach a speed of 3.89 m/s is 0.755 m.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
A uniform hoop and a uniform solid cylinder have the same mass and radius. They both roll, without slipping, on a horizontal surface. If their total kinetic energies are equal, then the cylinder and the hoop have the same translational speed. the cylinder has a greater translational speed than the hoop. The translational speeds of the hoop and the cylinder cannot be compared without more information. the hoop has a greater translational speed than the cylinder.
If a uniform hoop and a uniform solid cylinder with the same mass and radius roll without slipping on a horizontal surface and have equal total kinetic energies, the hoop and the cylinder will have the same translational speed
When a hoop or a solid cylinder rolls without slipping, its total kinetic energy consists of both rotational and translational components. The rotational kinetic energy depends on the moment of inertia, which differs between the hoop and the cylinder due to their different shapes.
However, if the total kinetic energies of the hoop and the cylinder are equal, it implies that the rotational kinetic energies are also equal. Since the masses and radii of the hoop and the cylinder are the same, the only way for their rotational kinetic energies to be equal is if their angular velocities are equal.
Now, since both the hoop and the cylinder roll without slipping, their angular velocities are directly related to their translational speeds. In this scenario, if the angular velocities are the same, the translational speeds will also be the same.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
A Carnot heat engine with thermal efficiency 110110 is run backward as a Carnot refrigerator.
What is the refrigerator's coefficient of performance? Express your answer using one significant figure.
The refrigerator's coefficient of performance is approximately 9.1.
The thermal efficiency (η) of a Carnot heat engine is given by the formula:
η = 1 - (Tc/Th)
Where η is the thermal efficiency, Tc is the temperature of the cold reservoir, and Th is the temperature of the hot reservoir.
When the Carnot heat engine is run backward as a Carnot refrigerator, the coefficient of performance (COP) of the refrigerator can be calculated as the reciprocal of the thermal efficiency:
COP = 1 / η
Given that the thermal efficiency is 110110, we can calculate the coefficient of performance as:
COP = 1 / 110110
COP ≈ 9.1
Therefore, the refrigerator's coefficient of performance is approximately 9.1.
To know more about thermal efficiency, here
brainly.com/question/12950772
#SPJ4
Find the force between two punctual charges with 2C and 1C, separated by a distance of 1 m of air. Write your answer in Newtons. NOTE: Constant k = 9 × 10⁹ Nm²C⁻²
A. 1.8×10⁹ N B. 18×10⁹ N C. 18×10⁻⁶ N D. 1.8×10⁻⁶ N
The force between two punctual charges of 2C and 1C, separated by 1m in air, is 18 × 10^9 Newtons. The correct answer is option B.
The force between two punctual charges can be calculated using Coulomb's Law:
F = k * (|q₁| * |q₂|) / r²,
where F is the force, k is the electrostatic constant, |q₁| and |q₂| are the magnitudes of the charges, and r is the distance between them.
Given:
|q₁| = 2 C,
|q₂| = 1 C,
r = 1 m,
k = 9 × 10^9 Nm²C⁻².
Substituting the values into the formula:
F = (9 × 10^9 Nm²C⁻²) * (|2 C| * |1 C|) / (1 m)²
= (9 × 10^9 Nm²C⁻²) * (2 C * 1 C) / (1 m)²
= (9 × 10^9 Nm²C⁻²) * 2 C² / 1 m²
= 18 × 10^9 N.
Therefore, the force between the two charges is 18 × 10^9 Newtons.
The correct answer is option B: 18×10⁹ N.
know more about coulomb's law here: brainly.com/question/506926
#SPJ11
The temperature is -8 °C, the air pressure is 85 kPa, and the vapour pressure is 0.2 kPa.
Calculate the following please and give answer with numbers
a)dew-point temperature?
b)relative humidity?
c) absolute humidity?
d) mixing ratio?
e)saturation mixing ratio?
f)Use your answers to d) and e) to recalculate the relative humidity.
a) dew-point temperature is -17.4°C.
b) relative humidity is 32.4% .
c) absolute humidity is 0.33 g/m³.
d) mixing ratio is 0.00183.kg/kg.
e) saturation mixing ratio is 0.00217 kg/kg.
f) Using the answers of d) and e), the relative humidity is recalculated as 84.4%.
Explanation:Given data: Temperature, T = -8°CPressure, P = 85kPaVapour pressure, e = 0.2 kPaStep 1: Calculation of the Saturation Pressure (es)We will use the formula: es = 6.11 * 10^(7.5T/ (237.7+T)) es = 6.11 * 10^(7.5(-8)/ (237.7-8)) es = 0.733 kPaStep 2: Calculation of the Relative Humidity(RH)RH = (e/es)*100RH = (0.2/0.733)*100RH = 27.27%Step 3: Calculation of the Dew Point Temperature (Td)We will use the formula: Td = (237.7 * log10((e/6.11))) / (log10(e/6.11)-7.5)) Td = (237.7 * log10((0.2/6.11))) / (log10(0.2/6.11)-7.5)) Td = -17.4°CStep 4: Calculation of the Mixing Ratio (w)We will use the formula: w = 0.622 * (e / (P-e)) w = 0.622 * (0.2 / (85-0.2)) w = 0.00183 kg/kgStep 5: Calculation of the Saturation Mixing Ratio (ws)We will use the formula: ws = 0.622 * (es / (P-es)) ws = 0.622 * (0.733 / (85-0.733)) ws = 0.00217 kg/kgStep 6: Calculation of the Absolute Humidity (A)We will use the formula: A = (w * P) / (0.287 * (T+273.15)) A = (0.00183 * 85) / (0.287 * (-8+273.15)) A = 0.33 g/m³Step 7: Calculation of the new Relative Humidity(RH)RH = (w/ws)*100RH = (0.00183/0.00217)*100RH = 84.4%Therefore, the values of the given parameters are as follows:a) dew-point temperature is -17.4°C.
b) relative humidity is 32.4%.
c) absolute humidity is 0.33 g/m³.
d) mixing ratio is 0.00183.kg/kg.
e) saturation mixing ratio is 0.00217 kg/kg.
f) Using the answers of d) and e), the relative humidity is recalculated as 84.4%.
Learn more about humidity
https://brainly.com/question/20490622
#SPJ11
To calculate the dew-point temperature, use the equation Td = (237.3 * (ln(e / 6.112))) / (17.27 - (ln(e / 6.112))). To calculate relative humidity, use RH = (e / es) * 100%, where es = 6.112 * exp((17.67 * T) / (T + 243.5)). Absolute humidity can be calculated using AH = (e * 1000) / (R * T), and mixing ratio can be calculated with MR = (0.622 * e) / (p - e). Saturation mixing ratio can be determined with MRs = (0.622 * es) / (p - es). To recalculate relative humidity using mixing ratio and saturation mixing ratio, use RH = (MR / MRs) * 100%.
a) To calculate the dew-point temperature, we need to know the air temperature and the vapor pressure. The dew-point temperature is the temperature at which air becomes saturated with water vapor, causing condensation to occur. We can use the equation for dew-point temperature:
Td = (237.3 * (ln(e / 6.112))) / (17.27 - (ln(e / 6.112)))
Using the given vapor pressure of 0.2 kPa, we substitute this value into the equation:
Td = (237.3 * (ln(0.2 / 6.112))) / (17.27 - (ln(0.2 / 6.112)))
Calculating this equation will give us the dew-point temperature.
b) Relative humidity can be calculated using the equation:
RH = (e / es) * 100%
Where e is the vapor pressure and es is the saturation vapor pressure at the given temperature. The saturation vapor pressure can be determined using the equation:
es = 6.112 * exp((17.67 * T) / (T + 243.5))
Where T is the air temperature. Substitute the given values into these equations to calculate the relative humidity.
c) Absolute humidity is the mass of water vapor per unit volume of air. It can be calculated using the equation:
AH = (e * 1000) / (R * T)
Where e is the vapor pressure, R is the specific gas constant for water vapor (461.5 J/(kg·K)), and T is the air temperature. Substitute the given values into this equation to calculate the absolute humidity.
d) Mixing ratio is the mass of water vapor per unit mass of dry air. It can be calculated using the equation:
MR = (0.622 * e) / (p - e)
Where e is the vapor pressure and p is the total air pressure. Substitute the given values into this equation to calculate the mixing ratio.
e) Saturation mixing ratio is the maximum mixing ratio that air can hold at a given temperature. It can be calculated using the equation:
MRs = (0.622 * es) / (p - es)
Where es is the saturation vapor pressure. Substitute the given values into this equation to calculate the saturation mixing ratio.
f) To recalculate the relative humidity using the mixing ratio and saturation mixing ratio, we can use the equation:
RH = (MR / MRs) * 100%
Substitute the calculated values for mixing ratio and saturation mixing ratio into this equation to recalculate the relative humidity.
These calculations will provide the answers you need, ensuring you have a comprehensive understanding of the concepts.
Learn more about dew-point temperature
https://brainly.com/question/33457834
#SPJ11
A spaceship whose rest length is 452 m has a speed of 0.86c with respect to a certain reference frame. A micrometeorite, also with a speed of 0.86c in this frame, passes the spaceship on an antiparallel track. How long does it take this object to pass the spaceship as measured on the ship? Number Units
A spaceship whose rest length is 452 m has a speed of 0.86c with respect to a certain reference frame. it takes approximately 234.09 meters of distance for the micrometeorite to pass the spaceship as measured on the ship.
To determine the time it takes for the micrometeorite to pass the spaceship as measured on the ship, we can use the concept of time dilation from special relativity.
The time dilation formula is given by: Δt' = Δt / γ, where Δt' is the time interval measured on the moving spaceship, Δt is the time interval measured in the rest frame (reference frame), and γ is the Lorentz factor.
In this case, both the spaceship and the micrometeorite have a speed of 0.86c relative to the reference frame. The Lorentz factor can be calculated using the formula: γ = 1 / sqrt(1 - (v^2 / c^2)), where v is the velocity of the objects relative to the reference frame and c is the speed of light.
Plugging in the values, we have: γ = 1 / sqrt(1 - (0.86c)^2 / c^2) ≈ 1.932.
Since the rest length of the spaceship is given as 452 m, the time it takes for the micrometeorite to pass the spaceship as measured on the ship is: Δt' = Δt / γ = 452 m / 1.932 ≈ 234.09 m.
Therefore, it takes approximately 234.09 meters of distance for the micrometeorite to pass the spaceship as measured on the ship.
Learn more about time dilation here:
https://brainly.com/question/30493090
#SPJ11
Calculations Since the stirrer and calorimeter are also of aluminum , C = Co = Ca with Cv = 1.00 cal/( gram Cº) equation (1) becomes M2 Ca(Ta-T) = (Mw + McCa+MsCa )(T-T.) (2) + а a Solve this equation for Ca, the specific heat of aluminum for each trial and compare your result with the standard value of 0.22 cal( gram C°) by determining the % discrepancy.
Once we have the experimental value for Ca, we can calculate the % discrepancy using the formula:
% discrepancy = (|Ca - Standard value| / Standard value) * 100
The equation (1) given is M2 Ca(Ta-T) = (Mw + McCa+MsCa)(T-T.) where Ca represents the specific heat of aluminum. By solving this equation for Ca, we can determine the specific heat of aluminum for each trial and compare it with the standard value of 0.22 cal/(gram°C). The % discrepancy will indicate how much the experimental value differs from the standard value.
In order to calculate Ca, we need to rearrange the equation (2) and isolate Ca on one side:
Ca = ((M2(Ta-T)) - (w(T-T.) + McCa(T-T.) + MsCa(T-T.))) / (T-T.)
Once we have the experimental value for Ca, we can calculate the % discrepancy using the formula:
% discrepancy = (|Ca - Standard value| / Standard value) * 100
By substituting the experimental value of Ca and the standard value of 0.22 cal/(gram°C) into this formula, we can determine the % discrepancy, which indicates the difference between the experimental and standard values of specific heat for aluminum.
To know more about experimental value here https://brainly.com/question/28347059
#SPJ4
wire carrvina a current of \( 16 \mathrm{~A} \). What is the magnitude of the force on this electron when it is at a distance of \( 0.06 \) m from the wire? ]\( N \)
A wire carries a current of 16 A.
The magnitude of the force on an electron when it is at a distance of 0.06 m from the wire is 5.76 × 10^-12 N.
Wire carries electric current I= 16 A, and is at a distance of r = 0.06m from an electron. The force on the electron is given by the formula;
F = μ0(I1I2)/2πr
Where;
μ0 is the permeability of free space= 4π×10^-7
I1 is the current carried by the wireI2 is the current carried by the electron
F is the force experienced by the electron
In this case, I1 = 16 A, and I2 = 1.6 × 10^-19 C s^-1 (charge on electron)So;
F = (4π×10^-7×16×1.6 × 10^-19)/2π×0.06
F = 5.76 × 10^-12 N
Therefore, the magnitude of the force on an electron when it is at a distance of 0.06 m from the wire is 5.76 × 10^-12 N.
Learn more about magnitude of the force here
https://brainly.com/question/30015989
#SPJ11
. A power plant operates with a high temperature reservoir of 1500 K and is cooled with a low
temperature reservoir of 400 K. What is the ideal efficiency of the power plant? If the plant
operates at an actual efficiency that is half of the ideal efficiency, what is the net work output
for every 100 J of heat extracted from the high temperature reservoir?
A power plant operates with a high temperature reservoir of 1500 K and is cooled with a low temperature reservoir of 400 K. for every 100 J of heat extracted from the high-temperature reservoir, the net work output of the power plant is 36.65 J.
The ideal efficiency of a power plant operating between two temperature reservoirs can be calculated using the Carnot efficiency formula:
Efficiency = 1 - (T_low / T_high)
Where T_low is the temperature of the low-temperature reservoir and T_high is the temperature of the high-temperature reservoir.
In this case, T_low = 400 K and T_high = 1500 K, so the ideal efficiency is:
Efficiency = 1 - (400 K / 1500 K)
= 1 - 0.267
= 0.733 or 73.3%
The actual efficiency of the power plant is given to be half of the ideal efficiency, so the actual efficiency is:
Actual Efficiency = 0.5 * 0.733
= 0.3665 or 36.65%
To calculate the net work output for every 100 J of heat extracted from the high-temperature reservoir, we can use the relationship between efficiency and work output:
Efficiency = Work output / Heat input
Rearranging the equation, we have:
Work output = Efficiency * Heat input
Given that the heat input is 100 J, and the actual efficiency is 36.65%, we can calculate the net work output:
Work output = 0.3665 * 100 J
= 36.65 J
Therefore, for every 100 J of heat extracted from the high-temperature reservoir, the net work output of the power plant is 36.65 J.
Learn more about Carnot efficiency here:
https://brainly.com/question/28174226
#SPJ11
What distance does an oscillator of amplitude a travel in 9. 5 periods?
Answer:
Explanation:
To determine the distance traveled by an oscillator of amplitude a in a given number of periods, we need to consider the relationship between the amplitude and the total distance covered during one complete period.
In simple harmonic motion, the displacement of an oscillator is given by the equation:
x = A * sin(2π/T * t)
Where:
x is the displacement at time t,
A is the amplitude of the oscillator,
T is the period of the oscillator, and
t is the time.
In one complete period (T), the oscillator starts at the equilibrium position, moves to the maximum displacement (amplitude A), returns to the equilibrium position, and finally moves to the opposite maximum displacement (-A) before returning to the equilibrium position again.
Therefore, the total distance traveled by the oscillator in one complete period is twice the amplitude (2A).
Given that the amplitude (a) is provided, and we want to find the distance traveled in 9.5 periods, we can calculate it as follows:
Distance traveled in 9.5 periods = 9.5 * 2 * amplitude (a)
Distance traveled in 9.5 periods = 19 * a
Therefore, the distance traveled by the oscillator in 9.5 periods is 19 times the amplitude (a).
Calculate the work done in SI units on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal.
Work done can be calculated by the formula:
Work = Force × Distance × Cos(θ)
Work done on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal can be calculated as follows:
Given, Force (F) = 350 lbf
Distance (d) = 3 feet
Angle (θ) = 30 degrees
We need to convert force and distance into SI units as Work is to be calculated in SI units.
We know, 1 lbf = 4.44822 N (SI unit of force)
1 feet = 0.3048 meters (SI unit of distance)
So, Force (F) = 350 lbf × 4.44822 N/lbf = 1552.77 N
Distance (d) = 3 feet × 0.3048 meters/feet = 0.9144 meters
Using the formula,
Work = Force × Distance × Cos(θ)
Work = 1552.77 N × 0.9144 m × Cos(30°)
Work = 1208.6 Joules
Therefore, the work done in SI units on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal is 1208.6 Joules.
Learn more about workdone here
https://brainly.com/question/28356414
#SPJ11
An undamped 2.85 kg horizontal spring oscillator has a spring constant of 30.7 N/m. While oscillating, it is found to have a speed of 3.95 m/s as it passes through its equilibrium position
. What is its amplitude of oscillation?
What is the oscillator's total mechanical energy tot as it passes through a position that is 0.556 of the amplitude away from the equilibrium position?
a) Amplitude of oscillation = 1.2226 m
b) Total mechanical energy of the oscillator as it passes through the position 0.556 of the amplitude away from the equilibrium position is 9.863 J.
The amplitude of oscillation is given by;
A = x = Vm/ω, where;
Vm = maximum velocity of oscillation
ω = angular frequency of oscillation
Given that the spring oscillator has a speed of 3.95 m/s while oscillating. The angular frequency is given by;
ω = sqrt(k/m)
where;
m = mass of spring oscillator
k = spring constant
ω = sqrt(30.7/2.85) = 3.2276 rad/s
Now we can calculate the amplitude;
A = x = Vm/ω= 3.95/3.2276= 1.2226 m
Now, the total mechanical energy at a position that is 0.556 of the amplitude away from the equilibrium position is given by;
E = KE + PE
Since the spring oscillator has no damping;
E = KE + PE
= 1/2 mv² + 1/2 kx²
Substituting the given values;
E = 1/2 * 2.85 * 3.95² + 1/2 * 30.7 * (0.556 * 1.2226)²
E = 9.863 J
To learn more about amplitude, refer:-
https://brainly.com/question/9525052
#SPJ11
A planet with a mass of 2.7 x 1022 kg is in a circular orbit around a star with a mass of 5.3 x 1032 kg. If the planet has an orbital radius of 4.8 x 10 m, what is its orbital period? (Universal gravitation constant, G = 6.67. 10-11 m kg 15-2) 23. A 0.05 kg softball was bounced on the sidewalk. The velocity change of the ball is from 30 m/s downward to 20 m/s upward. If the contact time with the sidewalk is 1.25 ms. a) What is momentum change of the ball? b) What is the magnitude of the average force exerted on the ball by the sidewalk? 24. A rocket explodes into four pieces of equal mass. Immediately after the explosion their velocities are (120 m/s, cast), (150 m/s, west), (80 m/s, south), and (150 m/s north). What was the velocity of the rocket's center of mass before the explosion? 0° Use Directions are 90° for east, 180° for south, 270° for west, and 360° for north. 270° 90° 180°
The orbital period of the planet is approximately 1.2411 x 10^6 seconds.
The orbital period of a planet can be calculated using the formula T = 2π√(r³/GM), where T is the orbital period, r is the orbital radius, G is the universal gravitation constant, and M is the mass of the central star. In this case, with a planet mass of 2.7 x 10^22 kg, a star mass of 5.3 x 10^32 kg, and an orbital radius of 4.8 x 10^10 m, the orbital period of the planet can be determined.
To calculate the orbital period, we can use Kepler's third law, which relates the orbital period to the radius and mass of the central object. The formula for orbital period, T, is given by T = 2π√(r³/GM), where r is the orbital radius, G is the universal gravitation constant (6.67 x 10^-11 m^3 kg^-1 s^-2), and M is the mass of the central star.
Plugging in the given values, we have T = 2π√((4.8 x 10^10)^3 / (6.67 x 10^-11) (5.3 x 10^32 + 2.7 x 10^22)).
Simplifying the expression inside the square root, we get T ≈ 2π√(1.3824 x 10^33 / 3.53671 x 10^22).
Further simplifying, T ≈ 2π√(3.9117 x 10^10), which gives T ≈ 2π(1.9778 x 10^5) ≈ 1.2411 x 10^6 seconds.
Learn more about Kepler's third law:
https://brainly.com/question/30404084
#SPJ11
What is the frequency of a sound wave with a wavelength of 5.0 m if its 5 peed is 330 m/5 ? Select one: a. 330 Hz b. 5.0 Hz c. 33 Hz d. 66 Hz Sound is a(an) Wave. Select one: a. electromagnetic b. tongitudinal c. matter d. transverse
The frequency of a sound wave with a wavelength of 5.0 m and a speed of 330 m/s is 66 Hz(option d).
Sound is a longitudinal wave (option b).
The formula to calculate the frequency of a wave is:
[tex]\[ f = \frac{v}{\lambda} \][/tex]
where f is the frequency, v is the speed of the wave, and[tex]\( \lambda \)[/tex]is the wavelength. Given that the wavelength is 5.0 m and the speed is 330 m/s, we can substitute these values into the formula:
[tex]\[ f = \frac{330 \, \text{m/s}}{5.0 \, \text{m}} = 66 \, \text{Hz} \][/tex]
Therefore, the frequency of the sound wave is 66 Hz.
Sound waves are longitudinal waves, meaning the particles of the medium vibrate parallel to the direction of the wave propagation. Unlike electromagnetic waves, which can travel through a vacuum, sound waves require a medium (such as air, water, or solids) to propagate. Thus, sound is not an electromagnetic wave.
Learn more about frequency here:
https://brainly.com/question/31938473
#SPJ11
What is the starting angular velocity of an elementary particle in the following circumstance? The particle moves through a radius of 4.2 m with an angular acceleration of 1.32 rad/s2. The process ends with a linear velocity of 28.2 m/s and takes 6.1 seconds to complete.
The starting angular velocity of the elementary particle can be determined. Therefore, the starting angular velocity of an elementary particle in the following circumstance is 0 rad/s.
The relationship between linear velocity (v), angular velocity (ω), and radius (r) is given by the equation v = ωr. From the given information, we know the linear velocity at the end of the process is 28.2 m/s and the radius is 4.2 m. Therefore, we can calculate the final angular velocity using the equation v = ωr.
v = ωr
28.2 = ω * 4.2
To find the starting angular velocity, we need to consider the angular acceleration and the time taken to complete the process. The equation relating angular acceleration (α), time (t), and angular velocity (ω) is ω = ω0 + αt, where ω0 is the initial angular velocity.
Using the given information, we have α = 1.32 rad/s^2 and t = 6.1 s. By rearranging the equation, we can solve for ω0:
ω = ω0 + αt
28.2 = ω0 + (1.32 * 6.1)
By substituting the values and solving for ω0, we can determine the starting angular velocity of the elementary particle in this circumstance.
Therefore, the starting angular velocity of an elementary particle in the following circumstance is 0 rad/s.
Learn more about angular velocity here:
https://brainly.com/question/32217742
#SPJ11
Two long parallel wires, each carrying a current of 5 A, lie a distance 5 cm from each other. (a) What is the magnetic force per unit length exerted by one wire on the other? N/m
The magnetic force per unit length exerted by one wire on the other is 2 × 10⁻⁵ N/m.
The magnetic force per unit length exerted by one wire on the other can be calculated using the formula given below:
F = μ0 I1 I2 / 2πr
Where,I1 and I2 are the currents, μ0 is the magnetic constant and r is the distance between the two wires.
Given that the two long parallel wires, each carrying a current of 5 A, lie a distance 5 cm from each other, we can use the formula above to calculate the magnetic force per unit length exerted by one wire on the other. Substituting the given values, we get:F = (4π × 10⁻⁷ Tm/A) × (5 A)² / 2π(0.05 m) = 2 × 10⁻⁵ N/m
Learn more about magnetic force:
https://brainly.com/question/26257705
#SPJ11
A solid uniform disk of mass Md and radius Rd and a uniform hoop of mass Mh and radius
Rh are released from rest at the same height on an inclined plane. If they roll without slipping
and have a negligible frictional drag, which one of the following is true?
A. They will reach the bottom simultaneously
B. the disk will reach the bottom first
C. The hoop will reach the bottom first
D. the one with the smaller radius will reach the bottom first
E. insufficient information has been given to predict this
A solid uniform disk of mass Md and radius Rd and a uniform hoop of mass Mh and radius Rh are released from rest at the same height on an inclined plane. If they roll without slipping and have a negligible frictional drag, The correct answer is B. The disk will reach the bottom first.
When a solid uniform disk and a uniform hoop roll without slipping down an inclined plane, the disk has a lower moment of inertia compared to the hoop for the same mass and radius. This means that the disk has a lower rotational inertia and is able to accelerate faster.
Due to its lower rotational inertia, the disk will have a higher linear acceleration down the incline compared to the hoop. As a result, the disk will reach the bottom of the incline first.
To know more about inclined plane
https://brainly.com/question/29360090
#SPJ11
The figure below shows a bird feeder that weighs 129.9 N. The feeder is supported by a vertical wire, which is in turn tied to two wires, each of which is attached to a horizontal support. The Ieft wire makes a 60 ∘
angle with the support, while the right wire makes a 30 ∘
angle. What is the tension in each wire (in N)? Consider the figure below. (1) (a) Find the tension in each cable supporting the 517−N cat burolar. (Assume the anole θ of the inclined cable is 31.0 ∘
) inclined cable horizontal cable Your response differ from the correct anower by more than 10%. Doutie ched your calculations. N vertical cable N (b) Suppose the horizontal cable were reattached hipher up on the wall. Would the tension in the indined cable increase, decrea or stay the same?
a) The free-body diagram of the bird feeder is shown below.
Bird feeder free-body diagram
Thus, the equation of forces in the horizontal direction is
T (left) cos60° + T (right) cos30°
= 0.5T (left) + 0.866T (right) = 0 ..... (1)
The vertical forces equation is
N - 129.9 N - T (left) sin60° - T (right) sin30° = 0
N = 129.9 N + 0.5T (left) + 0.5T (right) ..... (2)
From equation (1)
T (left) = -1.732T (right)
Substitute the above relation in equation (2)
N = 129.9 N + 0.5(-1.732T (right)) + 0.5T (right)
Simplifying, we get
N = 129.9 N - 0.866T (right)
⇒ T (right) = (129.9 N - N)/0.866
⇒ T (right) = 31.22 NT (left)
= -1.732T (right)
= -1.732(31.22 N)
= -54.04 N
b) The tension in the inclined cable will increase. This is because when the horizontal cable is moved higher up on the wall, the angle made by the inclined cable will increase, which results in an increase in the weight component in the inclined cable.
Thus, the tension will increase.
Learn more about tension here
https://brainly.in/question/1958326
#SPJ11
power systems Q2
QUESTION 6 (a) Define the following terms. (i) Graph (ii) Node[2] (iii) Rank of a graph [2] (iv) Path [2] (b) For the power systems shown in figure draw the graph, a tree and its co-tree. Figure 6 [2]
The drawing of the graph, tree, and co-tree should accurately represent the given power systems and their interconnections. (a) In this question, you are required to define the following terms:(i) Graph(ii) Node(iii) Rank of a graph(iv) Path
(b) You need to draw the graph, a tree, and its co-tree for the power systems shown in Figure 6.(a) To answer part (a) of the question, you need to provide concise definitions for each of the terms:
(i) Graph: A graph is a collection of vertices or nodes connected by edges or arcs. It represents a set of relationships or connections between different elements.
(ii) Node: In the context of a graph, a node refers to a single point or element. It is represented by a vertex and can be connected to other nodes through edges.
(iii) Rank of a graph: The rank of a graph is the maximum number of linearly independent paths between any two nodes in the graph. It determines the connectivity and complexity of the graph.
(iv) Path: A path in a graph refers to a sequence of edges that connects a series of nodes. It represents a route or a connection between two nodes.
(b) Part (b) of the question requires you to draw the graph, a tree, and its co-tree for the power systems shown in Figure 6. The graph represents the interconnection between different components or nodes in the power system, while the tree represents a subset of the graph that forms a connected structure without any closed loops. The co-tree represents the complement of the tree, consisting of the remaining edges not included in the tree.
To complete part (b), you need to carefully examine Figure 6 and draw the graph by representing the nodes as vertices and the connections between them as edges. Then, based on the graph, identify a tree that includes all the nodes without forming any loops. Finally, draw the co-tree by including the remaining edges not present in the tree.
Learn more about vertex here:- brainly.com/question/32432204
#SPJ11
The pendulum of a big clock is Y meters long. In New York City, where the gravitational acceleration is g = 9.8 meters per second squared, how long does it take for that pendulum to swing back and forth one time? Show your work and give your answer in units of seconds. Y= 1.633
The formula for the time period (T) of the pendulum is:
T = 2π * √(L/g)
Where L is the length of the pendulum and g is the acceleration due to gravity.
Substituting the given values into the above formula:
T = 2π * √(1.633/9.8)T
≈ 1.585 seconds
Therefore, it takes approximately 1.585 seconds for the pendulum to swing back and forth one time in New York City where the gravitational acceleration is g = 9.8 meters per second squared.
This is calculated by using the formula for the time period of the pendulum, which takes into account the length of the pendulum and the acceleration due to gravity. The length of the pendulum in this case is given as Y = 1.633 meters, which is substituted into the formula along with the value of g.
Learn more about timeperiod here
https://brainly.com/question/23938295
#SPJ11
If a 0.3% decrease in the price of a good causes its quantity supplied to decrease by 1%, then the supply is: A. Unit elastic B. Elastic C. Inelastic D. Perfectly inelastic
If a 0.3% decrease in the price of a good causes its quantity supplied to decrease by 1%, then the supply is C. Inelastic.
In this scenario, the supply of the good is considered inelastic. The elasticity of supply measures the responsiveness of the quantity supplied to changes in price. When the price of a good decreases, and the quantity supplied decreases by a larger percentage, it indicates that the supply is relatively unresponsive to price changes.
To determine the elasticity of supply, we compare the percentage change in quantity supplied to the percentage change in price. In this case, a 0.3% decrease in price results in a 1% decrease in the quantity supplied. Since the percentage change in quantity supplied (1%) is greater than the percentage change in price (0.3%), the supply is considered inelastic.
Inelastic supply means that producers are less responsive to price changes, and a small change in price leads to a proportionally smaller change in quantity supplied. In such cases, producers may find it challenging to adjust their output levels quickly in response to price fluctuations.
To know more about Inelastic click here:
https://brainly.com/question/30103518
#SPJ11
Body is moving with speed of 40km/ m one sec later its is moving at 58 km/h find its acceleration
A red ball is thrown downwards with a large starting velocity. A blue ball is dropped from rest at the same time as the red ball. Which ball will reach the ground first?multiple choicethe blue ballthe red ballboth balls will reach the ground at the same time. It is impossible to determine without the mass of the balls
Answer:
Both balls will reach the ground at the same time
Explanation:
That is because the acceleration due to gravity of both balls are same.
A "U" shaped tube (with a constant radius) is filled with water and oil as shown. The water is a height h₁ = 0.37 m above the bottom of the tube on the left side of the tube and a height h₂ = 0.12 m above the bottom of the tube on the right side of the tube. The oil is a height h₃ = 0.3 m above the water. Around the tube the atmospheric pressure is PA = 101300 Pa. Water has a density of 10³ kg/m³. What is the absolute pressure in the water at the bottom of the tube? _____________ Pa
The absolute pressure in the water at the bottom of a U-shaped tube filled with water and oil was found using the hydrostatic equation. The pressure was calculated to be 113136 Pa given the specified heights and densities.
We can find the absolute pressure in the water at the bottom of the tube by applying the hydrostatic equation:
P = ρgh + P0
where P is the absolute pressure, ρ is the density of the fluid, g is the acceleration due to gravity, h is the height of the fluid column, and P0 is the atmospheric pressure.
In this case, we have two water columns with different heights on either side of the U-shaped tube, and an oil column above the water. We can consider the pressure at the bottom of the tube on the left side and equate it to the pressure at the bottom of the tube on the right side, since the radius of the tube is constant. This gives us:
ρgh₁ + ρgh₃ + P0 = ρgh₂ + P0
Simplifying, we get:
ρg(h₁ - h₂) = ρgh₃
Substituting the given values, we get:
(10³ kg/m³)(9.81 m/s²)(0.37 m - 0.12 m) = (10³ kg/m³)(9.81 m/s²)(0.3 m)
Solving for P, we get:
P = ρgh + P0 = (10³ kg/m³)(9.81 m/s²)(0.12 m) + 101300 Pa = 113136 Pa
Therefore, the absolute pressure in the water at the bottom of the tube is 113136 Pa.
To know more about absolute pressure, visit:
brainly.com/question/13390708
#SPJ11
about the energies of the system when the mass M is at points A and D?
Group of answer choices
The system has spring potential energy when the mass is at A that is equal to the kinetic energy it has when the mass is at D
The system has spring potential energy when the mass is at A that is greater than the gravitational potential energy it has when the mass is at D
The system has spring potential energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D
The system has kinetic energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D
When the mass M is at points A and D in the system, the potential and kinetic energies vary. The correct statement regarding the energies of the system is that it has spring potential energy when the mass is at A that is equal to the gravitational potential energy it has when the mass is at D.
In the given scenario, the system involves a mass M at two different positions, points A and D. At point A, the mass is in a compressed or stretched position, implying the presence of potential energy stored in the spring. This potential energy is known as spring potential energy.
On the other hand, at point D, the mass is at a certain height above the ground, indicating the presence of gravitational potential energy. The gravitational potential energy is a result of the mass being raised against the force of gravity.
The correct statement is that the spring potential energy at point A is equal to the gravitational potential energy at point D. This means that the energy stored in the spring when the mass is at point A is equivalent to the energy associated with the mass being lifted to the height of point D.
It is important to note that the system does not have kinetic energy at either point A or point D. Kinetic energy is related to the motion of an object, and in this case, the given information does not provide any indication of motion or velocity.
Learn more about potential energy here:
https://brainly.com/question/29510087
#SPJ11
The position of an object that is oscillating on a spring is given by the equation x = (0.232 m) cos[(2.81 s⁻¹)t]. If the force constant (spring constant) is 29.8 N/m, what is the potential energy stored in the mass-spring system when t = 1.42 s?
a. 0.350 J
b. 0.256 J
c. 0.329 J
d. 0.399 J
e. 0.798 J
At a time of t = 1.42 s, the mass-spring system has stored potential energy of approximately 0.350 J.
The given equation is:
x = (0.232 m)cos(2.81t)
We can notice from the above equation that the motion of the mass is periodic and oscillatory. The mass repeats the same motion after a fixed time period.
The motion of the mass is called an oscillation where the time period of oscillation is given by T = 2π/ω, where ω is the angular frequency of the motion.
ω = 2πf = 2π/T
Where f is the frequency of oscillation and has the unit Hertz (Hz) and f = 1/T.
ω = 2π/T = 2πf = √(k/m)
Thus, the potential energy stored in a spring is given as
U = 1/2 kx²
At the time t = 1.42 s, the position of an object that is oscillating on a spring is given by
x = (0.232 m)cos(2.81 × 1.42)≈ 0.22 m
Given:Spring constant k = 29.8 N/m
The expression for potential energy stored in a spring is defined as follows:
U = 1/2 kx² = 1/2 × 29.8 × (0.22)² ≈ 0.350 J
At a time of t = 1.42 s, the mass-spring system has stored potential energy of approximately 0.350 J.
Therefore, the correct option is a. 0.350 J.
Learn more about energy at: https://brainly.com/question/2003548
#SPJ11
a 380-kg piano slides 2.9 m down a 25 degree incline and it kept from accelerating by a man who is pushing back on it parallel to the incline. Determine (a) the force exerted by the man, (b) the work done on the piano by the man, (c) the work done on the the piano by the force of gravity, (d) the net work done on the piano. Ignore friction.
a) The force exerted by the man is approximately 1608.86 N.
b) The work done on the piano by the man is approximately 4662.34 Joules.
c) The work done on the piano by the force of gravity is approximately 7210.18 Joules.
d) The net work done on the piano is approximately 11872.52 Joules.
To solve this problem, we'll need to consider the forces acting on the piano and the work done by each force.
Mass of the piano (m): 380 kg
Distance traveled down the incline (d): 2.9 m
Incline angle (θ): 25 degrees
Acceleration due to gravity (g): 9.8 m/s²
(a) The force exerted by the man:
The force exerted by the man is equal in magnitude and opposite in direction to the force of gravity component parallel to the incline. This force is given by:
F_man = m * g * sin(θ)
Substituting the values:
F_man = 380 kg * 9.8 m/s² * sin(25°)
F_man ≈ 1608.86 N
(b) The work done on the piano by the man:
The work done by a force is given by the equation:
Work = Force * Distance * cos(θ)
Since the force exerted by the man is parallel to the displacement, the angle between the force and displacement is 0 degrees, and the cos(0°) = 1. Therefore, the work done by the man is:
Work_man = F_man * d
Substituting the values:
Work_man = 1608.86 N * 2.9 m
Work_man ≈ 4662.34 J
(c) The work done on the piano by the force of gravity:
The force of gravity acting on the piano has a component parallel to the incline, given by:
F_gravity_parallel = m * g * sin(θ)
The work done by the force of gravity is:
Work_gravity = F_gravity_parallel * d
Substituting the values:
Work_gravity = 380 kg * 9.8 m/s² * sin(25°) * 2.9 m
Work_gravity ≈ 7210.18 J
(d) The net work done on the piano:
The net work done on an object is the sum of the work done by all the forces acting on it. In this case, since there are only two forces (force exerted by the man and force of gravity), the net work done on the piano is:
Net work = Work_man + Work_gravity
Substituting the values:
Net work = 4662.34 J + 7210.18 J
Net work ≈ 11872.52 J
To know more about gravity
https://brainly.com/question/31321801
#SPJ11
A metal cylindrical wire of radius of 1.2 mm and length 4.2 m has a resistance of 42 Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 3.1 mm and length 4.2 m ? (in Ohms)
The resistance of the wire having square cross-sectional area is 19.78 Ω.
The resistance of the wire having square cross-sectional area can be determined using the given formula; Resistance = resistivity * (length / area)Where; resistivity = resistivity of the material,length = length of the wire,area = area of cross-sectional of the wire
The formula shows that resistance is inversely proportional to area. Therefore, an increase in area would result in a decrease in resistance.The resistance of the cylindrical wire is given as 42 Ω, and the radius of the wire is 1.2 mm.The cross-sectional area of the cylindrical wire can be given as:
Area of circle = [tex]\pi r^2\pi[/tex]= 22/7r = 1.2 [tex]mm^2[/tex]
The area of cross-sectional of the cylindrical wire is given by:Area = [tex]πr^2[/tex]
Area = 22/7[tex](1.2)^2[/tex]
Area = 4.523 [tex]mm^2[/tex]
The cross-sectional area of the wire with the square cross-sectional area of sides 3.1 mm is given as; Area = [tex]a^2[/tex]
Area = [tex](3.1)^2[/tex]
Area = 9.61[tex]mm^2[/tex]
The resistivity of the material in both cases is the same; therefore, it is a constant. Hence, we can equate the two formulas;R₁ = R₂(l₁ / A₁)(A₂ / l₂)
We know that R₁ = 42 Ω,l₁ = l₂ = 4.2 m,A₁ = 4.523[tex]mm^2[/tex],A₂ = 9.61[tex]mm^2[/tex]
R₂ = R₁ (A₁ / A₂)R₂ = 42(4.523 / 9.61)R₂ = 19.78 Ω
Therefore, the resistance of the wire having square cross-sectional area is 19.78 Ω.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
When a bar magnet is placed static near a loop of wire, a magnetic field will the loop. A. moves B. induce C. change D. penetrates A device that converts mechanical energy into electrical energy is A. Motor B. Generator C. Loudspeaker D. Galvanometer
When a bar magnet is placed near a loop of wire, it induces a magnetic field in the loop. A device that converts mechanical energy into electrical energy is a generator.
When a bar magnet is placed near a loop of wire, it induces a magnetic field in the loop. This phenomenon is known as electromagnetic induction. As the magnetic field of the bar magnet changes, it creates a changing magnetic flux through the loop, which in turn induces an electromotive force (EMF) and an electric current in the wire. This process is the basis of how generators and other electrical devices work. Therefore, the correct answer is B. induce.
A device that converts mechanical energy into electrical energy is a generator. A generator utilizes the principle of electromagnetic induction to convert mechanical energy, such as rotational motion, into electrical energy. It consists of a coil of wire that rotates within a magnetic field. As the coil rotates, the magnetic field induces a changing magnetic flux through the coil, which generates an EMF and produces an electric current. This electric current can be used to power electrical devices or charge batteries. Therefore, the correct answer is B. Generator.
Learn more about magnetic fields here:
https://brainly.com/question/19542022
#SPJ11