Calculate the volume of 2. 30 moles of gas exerting a pressure of 2. 80 atm at 155°C.

The concentration of the HCl solution is 0.25 mol/L .

To determine the concentration of the HCl solution when titrated with 25mL of a 0.60M KOH solution, we need to use the following equation:
moles of HCl = moles of KOH

First, let's find the moles of KOH:
moles of KOH = volume (L) × concentration (M)
moles of KOH = 0.025 L × 0.60 mol/L
moles of KOH = 0.015 mol

Since the moles of HCl = moles of KOH, we have 0.015 mol of HCl. Now, we can calculate the concentration of the HCl solution:
concentration of HCl (M) = moles of HCl / volume of HCl (L)

The volume of HCl solution is given as 60 mL, which is equal to 0.060 L. Therefore:
concentration of HCl (M) = 0.015 mol / 0.060 L
concentration of HCl (M) = 0.25 mol/L
The concentration of the HCl solution is 0.25 mol/L (option 4).

To know more about concentration of the HCl solution  :

https://brainly.com/question/16998467

#SPJ11

To convert benzoic acid into a very strong acid, you can add electron-withdrawing substituents like nitro groups (-NO₂) to the aromatic ring. These substituents increase the acidity of the carboxylic acid group by stabilizing the negative charge on the conjugate base, the benzoate ion.

Let us discuss this in detail.

1. Add a nitro group (-NO₂) as a substituent to the aromatic ring of benzoic acid. You can add more than one nitro group to further increase acidity.

2. The electron-withdrawing nature of the nitro group stabilizes the negative charge on the conjugate base (benzoate ion) by delocalizing the negative charge through resonance.

3. As a result, the equilibrium between benzoic acid and its conjugate base shifts towards the conjugate base, making the modified benzoic acid a stronger acid.

The structure of the modified benzoic acid with a nitro group at the ortho or para position is as follows:

      O
      ||
-C₆H₄-NO₂-C-O-H

Remember, adding more electron-withdrawing substituents like nitro groups will further increase the acidity of the benzoic acid derivative.

Learn more about benzoic acid at https://brainly.com/question/29751745

#SPJ11

6-hydroxy-3,4-dimethyl-2-heptanone has four stereoisomers and the cyclic hemiacetal derived from it can exist as two stereoisomers.

6-hydroxy-3,4-dimethyl-2-heptanone has two chiral centers (carbon atoms with four different substituents attached), which gives rise to four possible stereoisomers: two pairs of enantiomers, each pair of which are diastereomers of the other pair.

When 6-hydroxy-3,4-dimethyl-2-heptanone forms a cyclic hemiacetal, it creates another chiral center at the carbon atom that is involved in the formation of the hemiacetal. The hemiacetal can exist as two possible diastereomers, depending on the configuration of the hydroxyl group and the methyl group on the newly formed chiral center. Therefore, there are two possible stereoisomers for the cyclic hemiacetal.

To know more about stereoisomers, here

brainly.com/question/31147524

#SPJ4

The pH of the resulting solution is calculated to be 1.40.

To determine the pH of the resulting solution, we need to first calculate the moles of each acid present.

Moles of HCl = (0.50 mol/L) x (0.050 L) = 0.025 mol
Moles of HNO3 = (0.10 mol/L) x (0.150 L) = 0.015 mol

Since the two acids are both strong acids, they will completely dissociate in solution. This means that the resulting solution will contain 0.025 mol of H+ ions from HCl and 0.015 mol of H+ ions from HNO3.

To calculate the pH of this solution, we can use the equation:

pH = -log[H+]

[H+] = (0.025 mol + 0.015 mol) / (0.050 L + 0.150 L) = 0.040 mol/L

pH = -log(0.040) = 1.40

Therefore, the pH of the resulting solution is 1.40.

In summary, when 50.0 ml of 0.50 M HCl is added to 150.0 ml of 0.10 M HNO3, the resulting solution contains 0.025 mol of H+ ions from HCl and 0.015 mol of H+ ions from HNO3. The pH of the resulting solution is calculated to be 1.40.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.

To calculate the average rate of reaction for a given time interval, we need to know the change in the concentration of a reactant or product over that time period. Let's assume that we have that information.

The average rate of reaction from 180s to 300s can be calculated using the following formula:

average rate = (change in concentration)/(change in time)

Let's say that the concentration of a product increased from 0.05 M to 0.15 M over the time interval from 180s to 300s. The change in concentration is:

change in concentration = final concentration - initial concentration

change in concentration = 0.15 M - 0.05 M

change in concentration = 0.10 M

The change in time is:

change in time = final time - initial time

change in time = 300 s - 180 s

change in time = 120 s

Now we can substitute these values into the formula to find the average rate of reaction:

average rate = (change in concentration)/(change in time)

average rate = (0.10 M)/(120 s)

average rate = 0.00083 M/s

Therefore, the average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.

Learn more about Average rate at

brainly.com/question/12395856

#SPJ4

The mole ratio of H to C in ethanol is 1:3.

The mole ratio of H to C in ethanol, which has a chemical formula of CH3CH2OH, can be determined by looking at the number of atoms of each element present in the molecule. In this case, there are six carbon atoms and two hydrogen atoms. Therefore, the mole ratio of H to C in ethanol is 1:3.

This means that for every one mole of hydrogen atoms in ethanol, there are three moles of carbon atoms present. This ratio is important because it can be used to calculate the amount of reactants needed to produce a certain amount of product in a chemical reaction.

For example, if ethanol was being produced from a reaction involving a certain amount of carbon and hydrogen, the mole ratio of H to C could be used to determine how much of each reactant was needed to produce a specific amount of ethanol.

Overall, understanding the mole ratio of H to C in a molecule like ethanol can be useful in a variety of chemical applications and reactions.

Know more about Mole ratio here:

https://brainly.com/question/15288923

#SPJ11

The term molarity is an important method which is used to calculate the concentration of a solution. By dissolving the same number of moles of each substance in the same volume of water we can make solutions of same molarity. The correct option is B.

Molarity is defined as the number of moles of the solute present per litre of the solution. It is represented as 'M' and its unit is mol / L. The term molarity is also called the molar concentration.

When same number of moles of substances are dissolved in the same volume of water, then the two solutions have same molarity.

Thus the correct option is B.

To know more about Molarity, visit;

https://brainly.ph/question/1634511

#SPJ1

The temperature of 5.16g of helium gas at a pressure of 785 mmHg that occupies a 1.00 L container is approximately 248 Kelvin.

The temperature of 5.16g of helium gas at a pressure of 785 mmHg that occupies a 1.00 L container can be calculated using the ideal gas law equation:

PV = nRT

where P is the pressure in atm, V is the volume in L, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

Convert the pressure from mmHg to atm by dividing by 760 mmHg/atm:

785 mmHg ÷ 760 mmHg/atm = 1.033 atm

Calculate the number of moles of helium gas using its molecular weight:

molecular weight of helium = 4.00 g/mol

moles of helium = 5.16 g ÷ 4.00 g/mol = 1.29 mol

Now, we can rearrange the ideal gas law equation to solve for T:

T = PV ÷ nR

T = (1.033 atm)(1.00 L) ÷ (1.29 mol)(0.0821 L atm/mol K)

T = 248 K

To learn more about temperature follow the link:

brainly.com/question/14633960

#SPJ4

The Arrhenius equation describes the relationship between the rate constant (k) of a chemical reaction and the temperature (T) at which the reaction occurs. The equation is given as:

k = Ae^(-Ea/RT)

where A is the pre-exponential factor or frequency factor, Ea is the activation energy required for the reaction to occur, R is the gas constant, and e is the base of the natural logarithm.

The Arrhenius equation indicates that as the temperature of a chemical reaction increases, the rate constant also increases exponentially.

The activation energy term (Ea) represents the minimum energy required for reactants to form products, and the pre-exponential factor (A) represents the frequency of successful collisions between reactant molecules.

This equation is commonly used in the study of chemical kinetics, which is the study of the rates of chemical reactions and the factors that affect them.

to know more about Arrhenius equation refer here:

https://brainly.com/question/30514582#

#SPJ11

A sample of helium gas that occupies 2.65 L at 1.20 atm would exert a pressure of 3.18 atm in a 1.50-L container at the same temperature, according to Boyle's Law.

To know the pressure exerted by a sample of helium gas that occupies 2.65 L at 1.20 atm when it's compressed to 1.50 L at the same temperature, using Boyle's Law (V₁P₁ = V₂P₂).

Here's the step-by-step explanation:
1. Identify the initial volume (V₁), initial pressure (P₁), and final volume (V₂):
  V₁ = 2.65 L
  P₁ = 1.20 atm
  V₂ = 1.50 L

2. Apply Boyle's Law to find the final pressure (P2):
  V₁P₁ = V₂P₂

3. Plug in the values and solve for P₂:
  (2.65 L)(1.20 atm) = (1.50 L)P₂

4. Calculate P₂:
  P₂= (2.65 L × 1.20 atm) / 1.50 L
  P₂= 3.18 atm
A sample of helium gas that occupies 2.65 L at 1.20 atm would exert a pressure of 3.18 atm in a 1.50-L container at the same temperature, according to Boyle's Law.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

The specific heat capacity of glass is 0.84 J/g°C.

To calculate the specific heat capacity of the glass, follow these steps:
1. Determine the energy gained by the water: Q_water = m_water * c_water * ΔT_water
2. Determine the energy lost by the glass: Q_glass = m_glass * c_glass * ΔT_glass
3. Since energy is conserved, Q_water = Q_glass
4. Solve for the specific heat capacity of the glass (c_glass).


m_glass = 45.7 g
m_water = 250.0 g
c_water = 4.18 J/g°C
Initial temperature of water (T1_water) = 22.5°C
Final temperature (T2) = 24.2°C
ΔT_water = T2 - T1_water = 1.7°C
ΔT_glass = T2 - 100°C = -75.8°C

1. Q_water = 250.0 g * 4.18 J/g°C * 1.7°C = 1776.7 J
2. Q_glass = 45.7 g * c_glass * (-75.8°C)
3. 1776.7 J = 45.7 g * c_glass * (-75.8°C)
4. c_glass = 0.84 J/g°C

To know more about specific heat capacity click on below link:

https://brainly.com/question/29766819#

#SPJ11

The standard free-energy change for the reaction H₂(g) + Br₂(l) → 2HBr(g) at 25°C can be calculated using the equation ΔG° = ΔH° - TΔS°, where ΔH° is the standard enthalpy change, T is the temperature, and ΔS° is the standard entropy change.

To calculate the standard free-energy change for the reaction H₂(g) + Br₂(l) → 2HBr(g) at 25°C, you need to use the equation: ΔG° = ΔH° - TΔS°. Follow these steps:

1. Determine the standard enthalpy change (ΔH°) for the reaction.
2. Determine the standard entropy change (ΔS°) for the reaction.
3. Calculate ΔG° using the equation and the given temperature (25°C = 298.15 K).

To know more about standard free-energy click on below link:

https://brainly.com/question/6556762#

#SPJ11

Total, 0.77 g of I2 is the amount of the excess reagent that remains after the reaction.

To determine the excess reagent remaining, we first need to find the limiting reagent.

The balanced equation tells us that 2 moles of Al react with 3 moles of I₂ to form 2 moles of AlI₃. We can use this information to calculate the theoretical yield of AlI3 based on the amount of each reactant;

moles of Al = 1.80 g / 26.98 g/mol = 0.067 moles

moles of I₂  = 2.30 g / 253.81 g/mol = 0.009 moles

Since the stoichiometry of the reaction is 2:3 for Al and I₂ , respectively, we can see that I₂ is the limiting reagent. Thus, all of the Al will react, while some of the I₂ will be left over.

The amount of AlI₃ that can be formed from the limiting reagent (I2) is:

moles of AlI₃ = 0.009 moles I₂  × (2 moles AlI₃ / 3 moles I₂ )

= 0.006 moles AlI₃

The mass of AlI₃ that can be formed is;

mass of AlI₃ = 0.006 moles × 407.82 g/mol

= 2.47 g

Since we know that only 2.30 g of I₂  was present initially, we can calculate the amount of excess I₂ remaining after the reaction;

excess I₂  = 2.30 g - (0.009 moles I₂  × 253.81 g/mol)

= 0.77 g

Therefore, 0.77 g of reagent that remains after the reaction.

To know more about theoretical yield here

https://brainly.com/question/14966377

#SPJ4

The gas must be decreased to a volume of 4.4 L to be under STP. The answer is option (a).

Using the ideal gas law, PV=nRT, we can solve for the number of moles of gas:

n = PV/RT

where P is pressure, V is volume, R is the gas constant (0.0821 L·atm/mol·K), and T is temperature in Kelvin.

First, we need to convert the temperature to Kelvin:

52.0°C + 273.15 = 325.15 K

Then we can calculate the number of moles of gas:

n = (89.9 kPa)(15 L)/(0.0821 L·atm/mol·K)(325.15 K) = 0.703 mol

To find the volume at standard temperature and pressure (STP), we can use the fact that at STP, the pressure is 1 atm and the temperature is 273.15 K. So we can set up a ratio:

(P1)(V1)/(n1)(T1) = (P2)(V2)/(n2)(T2)

where P1 = 89.9 kPa, V1 = 15 L, n1 = 0.703 mol, T1 = 325.15 K, P2 = 1 atm, T2 = 273.15 K, and we want to solve for V2:

(89.9 kPa)(15 L)/(0.703 mol)(325.15 K) = (1 atm)(V2)/(0.703 mol)(273.15 K)

V2 = (1 atm)(15 L)(0.703 mol)(273.15 K)/(89.9 kPa)(325.15 K) = 4.4 L

Therefore, the gas must be decreased to a volume of 4.4 L to be under STP. The answer is option (a).

To know more about ideal gas law refer to-

https://brainly.com/question/30458409

#SPJ11

Complete question

A quantity of gas has a volume of 15 liters at 52. 0°C and 89. 9 kPa of pressure. To what volume must the gas be decreased for the gas to be under standard temperature and pressure conditions?

a. 4. 4L

b. 8. 7L

c. 0. 39 L

d. 11L

A plant may go through a physiological response known as thermomorphogenesis in response to a heat stimulus. Option D.The plant grows tall. is correct.

This response may cause the plant to grow and develop in a variety of different ways, including enhanced stem elongation or modifications to the morphology of the leaves. As a result of enhanced stem elongation brought on by heat stress, plants can generally grow taller. This adaptation enables the plant to go away from the heat source and more easily absorb cooler air.

It is unusual for a plant to lose all of its leaves in response to a heat stimulation because this would mean a large loss of resources for the plant. Similar to how producing large fruit is not a usual reaction to heat stress, this is because the plant's energy resources might be diverted from reproduction to survival.

Heat stress may cause flowers to drop their petals, although this is not a universal reaction and would depend on the particular plant type and climatic factors.

For more such questions on Heat stress

https://brainly.com/question/10687398

This is because when water is added to ethanol, the two substances form a homogenous solution, meaning the two substances mix together to form a single molecular solution.

As a result, the water molecules and ethanol molecules take up the same amount of space, meaning the total volume of the mixture is less than the sum of the original two volumes (50 ml of water + 50 ml of ethanol = less than 100 ml).

This phenomenon is known as "volume contraction" and is caused by the intermolecular forces between water and ethanol molecules. This contraction also occurs when two other liquids are mixed together in certain combinations.

Know more about Volume contraction here

https://brainly.com/question/14980755#

#SPJ11

The pressure of [tex]CO_2[/tex] gas in the canister at 20.00°C is 0.611 atm.

To determine the pressure of [tex]CO_2[/tex] gas in the canister, we can use the ideal gas law:

PV = nRT

First, we need to convert the volume of the canister from milliliters (mL) to liters (L):

500.0 mL = 0.5000 L

Next, we need to calculate the number of moles of [tex]CO_2[/tex] gas:

n = m/MW

where m is the mass of [tex]CO_2[/tex] gas and MW is the molar mass of [tex]CO_2[/tex] (44.01 g/mol).

n = 0.4650 g / 44.01 g/mol = 0.01057 mol

Now we can plug in the values and solve for the pressure:

P = nRT/V = (0.01057 mol)(0.0821 L·atm/mol·K)(293.15 K) / 0.5000 L = 0.611 atm

To know more about ideal gas law, here

brainly.com/question/6534096

#SPJ4

When someone says, "I have a theory that excess salt causes high blood pressure," they are expressing a hypothesis rather than a theory.

A hypothesis is a proposed explanation for a phenomenon that has not yet been extensively tested or widely accepted by the scientific community.

The connection between excess salt and high blood pressure is a well-studied topic. Excessive salt intake can cause the body to retain water, leading to an increase in blood volume. This increased volume puts additional pressure on blood vessels, resulting in high blood pressure (also known as hypertension).

Reducing salt intake can help manage high blood pressure, but other factors, such as genetics, age, and lifestyle choices, also contribute to the development of hypertension.

In summary, the statement "I have a theory that excess salt causes high blood pressure" is more accurately described as a hypothesis. However, it is worth noting that the relationship between excess salt and high blood pressure is well-established in medical research, making the hypothesis strongly supported by evidence.

To know more about hypothesis, visit:

https://brainly.com/question/29519577#

#SPJ11

The mass of iron (III) oxide produced when 3.88 x 10²⁵ molecules of oxygen react with excess iron is 685.58 grams.

Determine the moles of oxygen molecules:
Number of moles = Number of molecules / Avogadro's number
Number of moles = 3.88 x 10²⁵ molecules / 6.022 x 10²³ molecules/mol
Number of moles = 6.44 moles of O₂

Use the balanced chemical equation to find the moles of Fe₂O₃ produced:
4Fe + 3O₂ → 2Fe₂O₃
Since 3 moles of O₂ react to produce 2 moles of Fe₂O₃
=(6.44 moles O₂) x (2 moles Fe₂O₃ / 3 moles O₂)

= 4.29 moles Fe₂O₃

Molar mass of Fe₂O₃ =

2(55.85) + 3(16.00) = 159.70 g/mol

Calculate the mass of Fe₂O₃ produced:
mass = moles x molar mass
mass = 4.29 moles x 159.70 g/mol
mass = 685.58 g

Therefore, when 3.88 x 1025 molecules of oxygen react with excess iron, 685.58 grams of iron (III) oxide are produced.

To learn more about molar mass visit:

https://brainly.com/question/837939

#SPJ11

The sequence of amino acids in a protein is controlled by the information stored in the DNA molecules.

DNA (deoxyribonucleic acid) is the genetic material that contains the instructions for the development, growth, and function of all living organisms. The DNA sequence is made up of four nucleotide bases, which are adenine (A), cytosine (C), guanine (G), and thymine (T). These nucleotide bases form a code that determines the sequence of amino acids in a protein.

The sequence of amino acids is important because it determines the shape and function of the protein. Proteins are essential macromolecules that perform a wide range of functions in living organisms, such as enzymes, hormones, and structural components.

The amino acid sequence is critical in determining the three-dimensional structure of a protein, which is essential for its function.

The process of converting the DNA code into a sequence of amino acids is called protein synthesis. Protein synthesis involves two main steps: transcription and translation. During transcription, the DNA sequence is copied into a molecule called RNA (ribonucleic acid).

The RNA molecule then carries the code to the ribosome, where the sequence of amino acids is assembled according to the code.

In summary, the sequence of amino acids in a protein is controlled by the information stored in the DNA molecules. This sequence is important because it determines the shape and function of the protein, which is essential for the proper functioning of living organisms.

To know more about amino acids, visit:

https://brainly.com/question/14583479#

#SPJ11

The maximum number of balloons that can be inflated with hot air is 0.017 balloons.

Inflation is an economic concept that refers to the increase in the cost of goods and services over time. High inflation can lead to a decrease in purchasing power, as prices rise faster than wages.

The amount of heat energy required to heat 1 kg of air from 25 C to 100 C is 150 kJ.

Since 1kg of butane (C₄H₁₀) fuel releases around 46.9 kJ of energy when burned, we can calculate how much fuel is needed to heat 1 kg of air.

150 kJ / 46.9 kJ = 3.19 kg of fuel

To calculate the maximum number of balloons that can be inflated with hot air, we need to know the volume of air contained in the balloons.

Volume of the balloon = 4/3πr3

Volume of the balloon = 4/3π(1403)

Volume of the balloon = 1.71 m3

To calculate the mass of air contained in the balloon, we can use the ideal gas law, where PV = nRT.

P = Pressure, V = Volume, n = number of moles, R = gas constant, T = Temperature

Pressure = 1 atm

Volume = 1.71 m3

Number of moles = 1

Gas constant = 8.314

Temperature = 25 C

nRT/V = P

1 (8.314) (298.15) / 1.71

= 183.6 kg

Therefore, the mass of air contained in the balloon is 183.6 kg.

To determine the maximum number of balloons that can be inflated with hot air, we need to know the total mass of fuel available.

1 kg of fuel x 3.19 = 3.19 kg of fuel

To calculate the maximum number of balloons that can be inflated with hot air, we need to divide the mass of fuel available by the mass of air contained in the balloon.

3.19 kg / 183.6 kg = 0.017

Therefore, the maximum number of balloons that can be inflated with hot air is 0.017 balloons.

To learn more about inflated

https://brainly.com/question/29509431

#SPJ4

The molar mass of the unknown gas is approximately 221.6 g/mol.

To find the molar mass of the unknown gas, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the given values to their appropriate units:

mass (m) = 205 g

volume (V) = 20.0 L

pressure (P) = 1.00 atm

temperature (T) = 273 K

Next, we can rearrange the ideal gas law equation to solve for the number of moles:

n = PV / RT

Substituting the given values, we get:

n = (1.00 atm) x (20.0 L) / [(0.08206 L atm/mol K) x (273 K)]

n = 0.926 mol

Now we can calculate the molar mass of the unknown gas by dividing its mass by the number of moles:

molar mass = mass / n

molar mass = 205 g / 0.926 mol

molar mass = 221.6 g/mol

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

potassium + chlorine → potassium chloride

hydrogen + iodine → hydrogen iodide

A synthesis reaction is a type of chemical reaction in which two or more simple substances combine to form a more complex product. In a synthesis reaction, the reactants come together to create a single compound, usually with the release of energy in the form of heat or light. The general equation for a synthesis reaction is A + B → AB, where A and B are the reactants, and AB is the product.

Synthesis reactions are also known as combination reactions because they involve the combination of two or more substances to form a new compound.

Learn more about synthesis reaction, here:

https://brainly.com/question/16987748

#SPJ1

To convert the local atmospheric pressure from mm of Hg to kPa, follow these steps:

1. Calculate the conversion of mm of Hg to atm:
  1 atm = 760 mm of Hg
  392 mm Hg × (1 atm / 760 mm Hg) = 0.5158 atm

2. Convert atmospheres to kilopascals (kPa):
  1 atm = 101.325 kPa
  0.5158 atm × (101.325 kPa / 1 atm) = 52.24 kPa

Following significant digit rules, the pressure in kilopascals is 52.2 kPa.

What is atmospheric pressure?

Atmospheric pressure is the force exerted by the weight of the Earth's atmosphere on a unit of area at a given point on the Earth's surface. The atmosphere is composed of gases, mainly nitrogen (78%) and oxygen (21%), and other trace gases such as argon, carbon dioxide, neon, and helium. These gases are held near the Earth's surface by the force of gravity, and they exert a pressure on the surface below.

Atmospheric pressure is usually measured in units of millibars (mb) or inches of mercury (inHg), and it varies depending on factors such as altitude, temperature, and weather conditions. At sea level, the standard atmospheric pressure is around 1013 mb or 29.92 inHg, but it decreases as you go higher in altitude, because there is less air above you to exert pressure.

Changes in atmospheric pressure can have a significant impact on weather patterns, and can cause changes in temperature, wind patterns, and precipitation. Weather forecasters often use changes in atmospheric pressure as a key indicator in predicting weather patterns.

To know more about Atmospheric pressure:

https://brainly.com/question/28310375

SPJ11

The patterns among chemical formulas relate to the placement of elements on the periodic table through their valence electrons and bonding capacity.

Chemical formulas exhibit patterns based on the periodic table's organization. Elements in the same group share similar properties and bonding capacities due to their valence electrons.

For example, elements in Group 1 have one valence electron and typically form +1 ions, while Group 17 elements have seven valence electrons and usually form -1 ions. When combining elements, the numbers in the chemical formula reflect the ratio of atoms required to achieve a stable electron configuration.

For instance, sodium (Na, Group 1) and chlorine (Cl, Group 17) form NaCl, where one sodium atom donates an electron to one chlorine atom, resulting in a stable compound. By understanding the periodic table's arrangement, we can predict chemical formulas and the properties of compounds.

To know more about periodic table click on below link:

https://brainly.com/question/11155928#

#SPJ11

Viscosity is a measure of a fluid's resistance to deformation under shear stress. In this case, Benzene has a viscosity of 0.000651 Pa. S at a temperature of 20°C. To calculate the shear stress required to deform Benzene at a velocity gradient of 4900 s-1, we can use the formula: shear stress = viscosity x velocity gradient.

Plugging in the values given, we get:

Shear stress = 0.000651 Pa. S x 4900 s-1
Shear stress = 3.191 Pa

Therefore, a shear stress of 3.191 Pa is required to deform Benzene at a velocity gradient of 4900 s-1. This means that if a force greater than 3.191 Pa is applied to Benzene, it will flow or deform under shear stress.

It is important to note that the viscosity of a fluid can change with temperature, pressure, and other factors, which can affect the fluid's ability to flow or deform under shear stress.

To know more about deformation under shear stress refer here

https://brainly.com/question/27969322#

#SPJ11

The voltage generated by a hydrogen-oxygen fuel cell at 73.5°C when the partial pressures of hydrogen and oxygen are 19.8 atm is 1.174 V.

The standard cell potential for the hydrogen-oxygen fuel cell is 1.23 V at 25°C. However, the Nernst equation takes into account the temperature and the partial pressures of the reactants. The Nernst equation is as follows:

Ecell = E°cell - (RT/nF)lnQ

where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant (8.314 J/K/mol), T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.

To calculate Q, we need to know the concentrations of the reactants and products. In the case of a fuel cell, the reactants are the fuels, which are gases, and their concentrations are expressed as partial pressures. The reaction in a hydrogen-oxygen fuel cell is:

2H2 + O2 → 2H2O

The reaction quotient can be expressed as:

Q = (PH2)²(PO2)

where PH2 is the partial pressure of hydrogen and PO2 is the partial pressure of oxygen.

At 73.5°C, the temperature in Kelvin is 346.65 K. The partial pressures of hydrogen and oxygen are 19.8 atm. Substituting these values into the Nernst equation, we get:

Ecell = 1.23 V - (8.314 J/K/mol)(346.65 K/ (2*96,485 C/mol)) ln[(19.8 atm)²(19.8 atm)]

Ecell = 1.23 V - 0.056 V

Ecell = 1.174 V

For more such questions on fuel

https://brainly.com/question/29429802

#SPJ11

A cylinder of Krypton has contains 17 L of Ar at 22. 8 atm and 112 degrees celsisus. There are 0.824 moles of Ar in the cylinder.

The number of moles of Ar in the cylinder can be calculated using the ideal gas law equation: PV = nRT, where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin.

To use this equation, the given temperature of 112 degrees Celsius must be converted to Kelvin by adding 273.15 to get 385.15 K. The pressure of 22.8 atm and volume of 17 L are already in the correct units.

R can be found using the equation R = 0.0821 L atm/(mol K), and plugging in the values for P, V, n, R, and T gives: (22.8 atm)(17 L) = n(0.0821 L atm/(mol K))(385.15 K) n = 0.824 mol

The number of moles of Ar in the cylinder can be found using the ideal gas law equation, which requires the pressure, volume, temperature, and the gas constant. After converting the given temperature to Kelvin, the calculation yields 0.824 moles of Ar.

Learn more about celsisus here:

https://brainly.com/question/23305985

#SPJ4

The temperature of the helium sample increased by 0.159 °C.

To solve this problem, we can use the equation:

q = mcΔT

where q is the heat absorbed, m is the mass of the helium sample, c is the specific heat capacity of helium, and ΔT is the change in temperature.

Substituting the given values, we get:

           q = mcΔT

125.7 cal = (634.5 g)(1.241 cal/(g·°C))ΔT

Solving for ΔT, we get:

ΔT = 125.7 cal / (634.5 g * 1.241 cal/(g·°C))

ΔT = 0.159 °C

To know more about specific heat capacity, click below.

https://brainly.com/question/22729342

#SPJ11