Calculate the volume of an hcp unit cell in terms of its a and c lattice parameters. also show that the apf for there hcp crystal structure is 0.74

D. A mountain range with folded layers of rock.

Intense compression can cause the rock layers to fold, creating a mountain range. This type of feature forms suddenly in the geological timescale, as a result of tectonic activity, and is known as a fold mountain.

The intense pressure causes the rock layers to buckle and deform, resulting in folds, faults, and other features. The Appalachian Mountains and the Rocky Mountains are examples of fold mountains in the United States.

To know more about mountain refer here

https://brainly.com/question/17950058#

#SPJ11

The volume-to-temperature ratio calculated by the students would be affected differently by each procedural change.

A) Failing to replenish boiling water would result in the flask being heated at a lower temperature than intended, leading to a smaller volume-to-temperature ratio.

B) Partially immersing the flask in the ice-water bath would lead to slower cooling and a higher temperature at the end of the cooling period, resulting in a larger volume-to-temperature ratio.

C) Neglecting to close the pinch clamp would allow air to enter the flask during cooling, leading to a lower pressure and a larger volume-to-temperature ratio.

D) Using 125 mL as the volume of the flask would result in an inaccurate volume-to-temperature ratio, as the actual volume of the flask may be different. It is important to measure the volume of the flask accurately to obtain reliable results.

To know more about ice-water bath click on below link:

https://brainly.com/question/28560741#

#SPJ11

The molar concentration of the solution is 0.25 M.

The molar concentration of a solution, also known as molarity, is defined as the number of moles of solute per liter of solution.

In this case, the amount of Ca(OH)2 dissolved is 0.55 mol and the volume of water used is 2.20 L. Therefore, the molar concentration can be calculated using the formula:

Hence, the molar concentration of the solution is 0.25 M.

To learn more about molar concentration, here

https://brainly.com/question/21841645

#SPJ4

The number of calories in 10 grams of sugar is an example of an intensive property. So the correct answer is 1.

Intensive properties are properties that do not depend on the amount or size of the sample being measured. In this case, the number of calories is a characteristic of sugar that remains constant regardless of the amount of sugar being measured. Other examples of intensive properties include density, boiling point, melting point, and color. On the other hand, extensive properties are properties that do depend on the amount or size of the sample being measured, such as mass, volume, and energy. Unique and chemical are not related to the concept of intensive or extensive properties. Correct Option 1.

To know more about Intensive properties, here

brainly.com/question/13733851

#SPJ4

--The complete Question is, Fill in the blanks.

The number of calories in 10 grams of sugar is an example of a(n) ___________________.

The volume of gas in the neon sign is 2.0 mL.

Neon signs are a popular form of advertising, characterized by bright and colorful lights that make them easily noticeable. These signs are made up of glass tubes that contain a small amount of neon gas at extremely low pressures, typically around 27.0 torr.

When an electrical current is applied to the gas, it emits a bright red-orange light, giving the sign its characteristic glow.

In order to determine the volume of gas in a neon sign, we need to use the ideal gas law equation, PV=nRT. We are given the pressure, temperature, and number of moles of gas in the sign, but we need to find the volume. Rearranging the equation to solve for V, we get V=nRT/P.

Plugging in the given values, we get:

V = (1.075 x 10^-4 moles)(0.0821 L•atm/mol•K)(315.75 K)/(27.0 torr x 1 atm/760 torr)
V = 0.002 L or 2.0 mL

Therefore, the volume of gas in the neon sign is 2.0 mL. It's important to note that the volume of gas in the sign can vary depending on the size and shape of the sign, as well as the pressure and temperature of the gas inside.

To know more about neon sign, visit:

https://brainly.com/question/30179681#

#SPJ11

Benign and malignant are terms used to describe different types of tumors.

A benign tumor is a mass of cells that grows slowly and does not invade nearby tissue or spread to other parts of the body. It is typically encapsulated, meaning it is surrounded by a membrane that separates it from surrounding tissues.

While it is still considered abnormal, it is usually not life-threatening and can often be removed with surgery. Benign tumors do not metastasize or spread to other parts of the body.

On the other hand, a malignant tumor is cancerous and has the ability to spread to other parts of the body through the bloodstream or lymphatic system. Malignant tumors grow rapidly and invade nearby tissue, which can cause damage to organs and structures in the body.

These tumors can also interfere with the normal functioning of organs, leading to serious health problems. Malignant tumors are usually treated with a combination of surgery, radiation, and chemotherapy.

To know more about tumors refer to-

https://brainly.com/question/14143650

#SPJ11

The initial temperature of the air in degree Celsius was approximately 33.6°C.

When the hiker inhales air, the air undergoes a temperature change from the initial temperature to the body temperature, and a volume change due to the expansion of the lungs.

Using the ideal gas law, we can relate the initial and final volumes and temperatures of the air.

PV = nRT

Assuming the pressure is constant, we can rearrange the equation to:

(V₁/T₁) = (V₂/T₂)

where V1 is the initial volume of air, T₁ is the initial temperature, V₂ is the final volume of air, and T₂ is the final temperature (body temperature, 37°C).

We can substitute the given values and solve for T₁:

(V₁/T₁) = (V₂/T₂)

(T₁/V₁) = (T₂/V₂)

T₁= (T2 × V₁ / V₂

T₁ = (310.15 K × 0.598 L) / 0.612 L

T₁≈ 303.5 K

Converting to degrees Celsius, we get:

T₁ ≈ 30.5°C

To know more about ideal gas law, refer here:

https://brainly.com/question/30458409#

#SPJ11

Buffer solutions are made by mixing a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of a buffer solution remains relatively constant when small amounts of an acid or a base are added to it.

Therefore, salt solutions containing the conjugate acid-base pair of a weak acid or a weak base could be used to prepare a buffer solution.

For example, to prepare an acetate buffer solution, one could mix a solution of sodium acetate ([tex]NaOAc[/tex]) with acetic acid ([tex]HOAc[/tex]).

The [tex]OAc^-[/tex]anion in the sodium acetate solution acts as a weak base and reacts with any added[tex]H^+[/tex] ions to form[tex]HOAc[/tex], which acts as a weak acid and buffers the solution's pH. Similarly, the [tex]NH4^+[/tex] cation in ammonium chloride ([tex]NH4Cl[/tex]) can react with [tex]OH^-[/tex]ions to form [tex]NH3[/tex], which acts as a weak base and buffers the pH of the solution.

Therefore, salt solutions containing the conjugate acid-base pair of a weak acid or a weak base can be used to prepare buffer solutions.

To know more about Buffer solutions refer to-

https://brainly.com/question/24262133

#SPJ11

The balanced equation for the reaction of iron (Fe) with chlorine gas (Cl₂) in an acidic solution, forming Fe³⁺ and Cl⁻, is:
6H⁺ + 2Fe + 3Cl₂ → 2Fe³⁺ + 6Cl⁻ + 6H₂O

In this reaction, iron (Fe) reacts with chlorine gas (Cl₂) in the presence of an acidic solution, which provides protons (H⁺) as reactants. The iron atoms are oxidized from their elemental state (0 oxidation state) to the +3 oxidation state, forming Fe³⁺ ions. Chlorine gas is reduced to chloride ions (Cl⁻).

To balance the equation, it is necessary to ensure that the number of atoms of each element is equal on both sides of the equation. In this case, we have two iron atoms and six hydrogen atoms on the left side, and two iron atoms, six hydrogen atoms, and six oxygen atoms on the right side.

By adding coefficients to the reactants and products, we can balance the equation:

2Fe + 3Cl₂ + 6H⁺ → 2Fe³⁺ + 6Cl⁻ + 2H₂O

Now, the equation is balanced with two iron atoms, three chlorine molecules, six hydrogen ions, two Fe³⁺ ions, six Cl⁻ ions, and two water molecules on each side of the equation.

To learn more about ions, refer below:

https://brainly.com/question/14982375

#SPJ11

The mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.

To find the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate, we can follow these steps:

1. Identify the molar concentration (M) of the solution, which is given as 0.200 M.
2. Convert the volume of the solution from mL to L: 500mL = 0.500L.
3. Calculate the moles of solute (Sodium Phosphate) using the formula: moles = Molarity × Volume. So, moles = 0.200 M × 0.500 L = 0.100 moles.
4. Find the molar mass of Sodium Phosphate (Na3PO4). The molar mass of Na is 22.99 g/mol, P is 30.97 g/mol, and O is 16.00 g/mol. Therefore, the molar mass of Na3PO4 is (3 × 22.99) + 30.97 + (4 × 16.00) = 163.94 g/mol.
5. Finally, calculate the mass of solute using the formula: mass = moles × molar mass. So, mass = 0.100 moles × 163.94 g/mol = 16.394 g.

In summary, the mass of solute in a 500mL solution of 0.200 M Sodium Phosphate is approximately 16.394 grams.

To know more about Sodium Phosphate, visit:

https://brainly.com/question/10559079#

#SPJ11

The cell potential for the given reaction at 25°C is -2.3895 V.

First, we need to balance the equation;

Mg(s) + Fe³⁺(aq) → Mg²⁺(aq) + Fe(s)

Next, we can use the Nernst equation to calculate the cell potential (Ecell) at 25°C;

Ecell = E°cell - (RT/nF)ln(Q)

where; E°cell is the standard cell potential

R is the gas constant (8.314 J/mol·K)

T is the temperature in Kelvin (298 K)

n is number of electrons transferred in balanced reaction

F is the Faraday constant (96,485 C/mol)

Q is the reaction quotient

Since the reaction is not balanced in terms of electrons transferred, we need to balance it and determine the number of electrons transferred:

Mg(s) + Fe³⁺(aq) → Mg²⁺(aq) + Fe(s) + 2e⁻

n = 2

The reaction quotient (Q) will be calculated using concentrations of the reactants and products;

Q = [Mg²⁺][Fe(s)] / [Mg(s)][Fe³⁺]

Substituting the given values, we get;

Q = (0.000612 M)(1) / (1)(1.29 M)

Q = 0.000474

Now, we can calculate the cell potential (Ecell) using the Nernst equation;

Ecell = E°cell - (RT/nF)ln(Q)

= (-2.37 V) - (0.0257 V)log10(0.000474)

= -2.37 V - 0.0195 V

= -2.3895 V

Therefore, the cell potential is -2.3895 V.

To know more about cell potential here

https://brainly.com/question/1313684

#SPJ4

Answer: C. law of conservation of mass

Explanation:

From the given information, we know that the parents are heterozygous, meaning they have two different alleles for the gene that controls coat color in their offspring. Let's use the following symbols to represent the alleles:

- B: the allele for black coat color

- b: the allele for white coat color

Since the offspring have a 25% chance of being black and a 25% chance of being white, we can assume that the parents are both heterozygous for the gene that controls coat color, which means they both have one B allele and one b allele. This is because:

- To be black, an offspring must inherit a B allele from each parent, so the parents must each have one B allele.

- To be white, an offspring must inherit a b allele from each parent, so the parents must each have one b allele.

The fact that the offspring also have a 50% chance of being speckled indicates that speckling is a result of incomplete dominance or co-dominance, where both alleles are expressed together.

Therefore, we can assume that the speckling phenotype is the result of both the B and b alleles being expressed together, rather than a third, intermediate allele.

In summary, based on the phenotype of their offspring, we can infer that the two parents are both heterozygous for the gene that controls coat color, with one B allele and one b allele each.

To know more about information refer here

https://brainly.com/question/30350623#

#SPJ11

The actual yield was 1.329 g Ag.

The balanced equation for the reaction between Zinc and Silver Nitrate is:

Zn + 2AgNO₃ -> 2Ag + Zn(NO₃)₂.

Given: 29 g Zn, and 2 g AgNO₃. Molar masses: Zn = 65 g/mol, AgNO₃ = 169.87 g/mol.

Moles Zn = 29/65 = 0.446 mol

Moles AgNO₃ = 2/169.87 = 0.0118 mol

Since the stoichiometric ratio is 1:2 (Zn:AgNO₃), we need 0.223 mol AgNO₃ for a complete reaction.

We have only 0.0118 mol AgNO₃, making it the limiting reagent.

Theoretical yield of Ag: 2 mol Ag produced from 1 mol AgNO₃.

0.0118 mol AgNO₃ * (2 mol Ag / 1 mol AgNO₃) * 108 g/mol (Ag's molar mass) = 2.54 g Ag

The actual yield was 1.329 g Ag.

Read more about Theoretical yield here:

https://brainly.com/question/25996347

#SPJ1

1674.64 g of sucrose must be burned to liberate 27,584 KJ.

To find the mass of sucrose (C₁₂H₂₂O₁₁) that must be burned to liberate 27,584 KJ, you'll need to use the heat of combustion and the following equation:
mass of sucrose = (energy required) / (heat of combustion)

First, find the heat of combustion of sucrose. The heat of combustion of sucrose is approximately -5640 KJ/mol.
Next, convert the energy required from KJ to mol by dividing by the heat of combustion:
mol sucrose = 27,584 KJ / (-5640 KJ/mol) = -4.89 mol

(Note that the negative sign indicates the reaction is exothermic, but we're interested in the magnitude of the value, so we'll proceed with the absolute value.)

Now, calculate the molar mass of sucrose:
C₁₂H₂₂O₁₁ = (12 × 12.01) + (22 × 1.01) + (11 × 16.00) = 144.12 + 22.22 + 176.00 = 342.34 g/mol

Finally, calculate the mass of sucrose by multiplying the moles by the molar mass:
mass of sucrose = 4.89 mol × 342.34 g/mol = 1674.64 g
So, approximately 1674.64 g of sucrose must be burned to liberate 27,584 KJ.

To know more about mass of sucrose :

https://brainly.com/question/30766771

#SPJ11

The synthesis reaction of chlorine gas (Cl2) and sodium metal (Na) results in the formation of table salt, which is sodium chloride (NaCl). To determine the amount of sodium chloride produced, we need to consider the stoichiometry of the reaction.

To determine how many grams of table salt are made from the synthesis reaction of chlorine gas and 400 grams of sodium metal, follow these steps:

1. Write the balanced chemical equation for the reaction:
2Na + Cl2 = 2NaCl

2. Calculate the molar mass of sodium (Na) and table salt (NaCl):
Na = 22.99 g/mol
NaCl = 22.99 g/mol (Na) + 35.45 g/mol (Cl) = 58.44 g/mol

3. Calculate the moles of sodium metal:
moles of Na = 400 g/22.99 g/mol = 17.40 moles

4. According to the balanced equation, 2 moles of Na produce 2 moles of NaCl. Therefore, the moles of NaCl produced are the same as the moles of Na used:
moles of NaCl = 17.40 moles

5. Calculate the mass of NaCl produced:
mass of NaCl = moles of NaCl  molar mass of NaCl = 17.40 moles  58.44 g/mol = 1,016.26 g

Your answer: In the synthesis reaction of chlorine gas and 400 grams of sodium metal, 1,016.26 grams of table salt are produced.

Learn more about "table salt": https://brainly.com/question/24858516

#SPJ11

7.3 mL of NaOH are used to titrate the 10.00 mL aliquot.

The balanced equation for the reaction between NaOH and HCl is:

NaOH(aq) + HCl(aq) → H₂O(l) + NaCl(aq)

To calculate the volume of NaOH used,  determine how much HCl is left after it reacts with the CaCO₃, and then how much NaOH is required to neutralize that remaining HCl.

Step 1: Calculate the moles of HCl used to react with CaCO₃

The balanced equation for the reaction between CaCO₃ and HCl is:

CaCO₃(aq) + 2HCl(aq) → CaCl₂(aq) + H2O(l) + CO₂(g)

From the balanced equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the number of moles of HCl used to react with the CaCO₃ is:

moles HCl = (7.50 mL)(2.00 mol/L) = 0.015 mol

Step 2: Calculate the concentration of HCl in the 125.0 mL solution

Started with 7.50 mL of 2.00 M HCl, which is equivalent to 0.015 moles of HCl. We added enough water to make a 125.0 mL solution, so the concentration of HCl in the solution is:

C = moles of HCl / volume of solution in L

C = 0.015 mol / 0.125 L = 0.12 M

Step 3: Calculate the moles of HCl remaining in the 10.00 mL aliquot

moles NaOH = moles HCl remaining in aliquot

(C of NaOH)(volume of NaOH) = (C of HCl)(moles of HCl remaining in aliquot)

(0.058 mol/L)(volume of NaOH) = (0.12 mol/L)(moles of HCl remaining in 10.00 mL aliquot)

moles of HCl remaining in 10.00 mL aliquot = moles of HCl in 125.0 mL solution - moles of HCl used to react with CaCO₃

moles of HCl remaining in 10.00 mL aliquot = (0.12 mol/L)(0.125 L) - 0.015 mol = 0.0035 mol

Substituting this into the equation gives:

(0.058 mol/L)(volume of NaOH) = (0.12 mol/L)(0.0035 mol)

volume of NaOH = (0.12 mol/L)(0.0035 mol) / (0.058 mol/L) = 0.0073 L

Step 4: Convert the volume of NaOH to mL

volume of NaOH = 0.0073 L x (1000 mL / 1 L) = 7.3 mL

Therefore, 7.3 mL of NaOH are used to titrate the 10.00 mL aliquot.

To know more about volume

https://brainly.com/question/1578538

#SPJ4

D. Al of the following is a reactant in the chemical equation

In a chemical equation, the substance or substances to the left of the arrow are referred to as reactants. A material that is present when a chemical reaction first begins is known as a reactant. Products refer to the material or substances to the right of the arrow. A material that is present following a chemical reaction is known as a product.

Methane (CH4) and oxygen (O2) are the reactants and carbon dioxide (CO2) and water are the products in this chemical process. (H2O). This illustration demonstrates that chemical bonds may form and break during a chemical process. The forces that keep the atoms of a molecule together are known as chemical bonds.

learn more about chemical  equation

https://brainly.com/question/23877810

#SPJ1

Answer:

air is a solution because it is homogeneous, uniform throughout,and doesn't scatter light

Both 1.0 mol of calcium (Ca) and 1.0 mol of magnesium (Mg) contain the same number of atoms (Avogadro's number, 6.022 x 10²³ atoms), but they differ in mass and chemical properties.

In order to compare 1.0 mol Ca and 1.0 mol Mg, we must first understand the concept of a mole. A mole is a unit of measurement that represents 6.022 x 10²³ particles (atoms, molecules, ions, etc.). This number, known as Avogadro's number, allows us to compare amounts of different substances.

Although 1.0 mol Ca and 1.0 mol Mg both contain the same number of atoms, their masses are different. The molar mass of Ca is 40.08 g/mol, while the molar mass of Mg is 24.31 g/mol.

Therefore, 1.0 mol Ca has a mass of 40.08 g, and 1.0 mol Mg has a mass of 24.31 g. Additionally, Ca and Mg are both alkaline earth metals but possess different chemical properties, such as reactivity and electron configurations.

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

The standard molar entropy change for the combustion of methane gas is 9.9 J/(mol·K).

The balanced equation for the combustion of methane is:

[tex]CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)[/tex]

The standard molar entropy change can be calculated using the formula:

ΔS° = ΣS°(products) - ΣS°(reactants)

The standard molar entropy values for the species involved in the reaction are:

ΔS°(CH4) = 186.3 J/(mol·K)

ΔS°(O2) = 205.0 J/(mol·K)

ΔS°(CO2) = 213.6 J/(mol·K)

ΔS°(H2O(l)) = 69.9 J/(mol·K)

Using these values, we can calculate the standard molar entropy change:

ΔS° = [ΔS°(CO2) + ΔS°(2H2O(l))] - [ΔS°(CH4) + ΔS°(2O2(g))]

ΔS° = [(213.6 J/(mol·K)) + (2 × 69.9 J/(mol·K))] - [(186.3 J/(mol·K)) + (2 × 205.0 J/(mol·K))]

ΔS° = 9.9 J/(mol·K)

Therefore, the standard molar entropy change for the combustion of methane gas is 9.9 J/(mol·K).

To know more about entropy refer to-

https://brainly.com/question/13135498

#SPJ11

The given reaction HgO → Hg + O₂ is a decomposition reaction.

The balanced chemical reaction is  2HgO → 2Hg + O₂

A decomposition reaction is a type of reaction in which a particular compound or molecule dissociates or decomposes to form smaller constituent particles.

Combustion is the burning of any substance in presence of oxygen to give out carbon dioxide, water and heat.

In Synthesis reaction , new compounds are synthesized from different reactants.

Displacement reactions involve exchange of cations and anions from reactants to form different products.

To know more about decomposition here

https://brainly.com/question/14024847

#SPJ4

Carbon-4 and Helium-4 are additional products that complete the model. Carbon-4 is an isotope of carbon with four protons and four neutrons.

It is the most common form of carbon in nature and is found in the Earth's crust and the atmosphere. Helium-4 is an isotope of helium with two protons and two neutrons.

It is the most common form of helium in nature and is found in the Earth's atmosphere and in stars. Carbon-8 and Helium-8 are heavier isotopes of carbon and helium respectively, with eight protons and eight neutrons each. Carbon-8 and Helium-8 are not found in nature and are not part of the model.

Carbon-4 and Helium-4 are important components of the model because they are the building blocks of organic compounds and biological systems. For instance, carbon-4 is found in the organic compounds that make up proteins, DNA, and carbohydrates.

Helium-4 is found in the atmosphere and is important for climate regulation. Additionally, both carbon-4 and helium-4 are important components of nuclear reactions, which are used to generate energy.

Know more about Carbohydrates here

https://brainly.com/question/29775112#

#SPJ11

The gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm

To determine the volume the gas occupies at a temperature of 28°C and a pressure of 1.631 atm, we will use the Ideal Gas Law, which is defined as PV = nRT. In this equation, P represents pressure, V represents volume, n represents the number of moles of the gas, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin: T(K) = T(°C) + 273.15. In this case, T(K) = 28 + 273.15 = 301.15 K.

Now, we can use the Ideal Gas Law to find the volume of the gas. The ideal gas constant (R) is 0.0821 L atm/mol K. Therefore, we have:

1.631 atm (V) = 3 moles (0.0821 L atm/mol K) (301.15 K)

To find the volume (V), we can rearrange the equation and isolate V:

V = (3 moles * 0.0821 L atm/mol K * 301.15 K) / 1.631 atm

V = 45.98271 L/mol / 1.631 atm

V ≈ 28.18 L

So, the gas occupies a volume of approximately 28.18 liters at a temperature of 28°C and a pressure of 1.631 atm.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

The balanced net ionic equation for the given reaction is:

H+ (aq) + OH- (aq) → H₂O (l)

This reaction represents the neutralization of an acid and a base, where the H+ ions from the acid (in this case, H+ from H₃PO₄) react with the OH- ions from the base (in this case, NaOH) to form water (H₂O).

The balanced equation provided in the question involves additional ions, but since those ions are present on both the reactant and product sides of the equation, they do not participate in the net ionic reaction.

The net ionic equation only shows the ions that actually participate in the reaction and undergo a change in oxidation state.

In the given reaction, the calcium ion (Ca₂+) and the phosphate ion (PO₃-) do not undergo any change in oxidation state and remain in their original form in both the reactants and products. Therefore, they cancel out in the net ionic equation.

Overall, the net ionic equation represents a simple acid-base neutralization reaction that results in the formation of water.

to know more about balanced ionic equation refer here:

https://brainly.com/question/31814906#

#SPJ11

The three ions containing phosphorus are phosphate (PO₄³⁻), hydrogen phosphate (HPO₄²⁻), and dihydrogen phosphate (H₂PO₄⁻).

The pattern observed is that adding hydrogen atoms successively reduces the negative charge of the ion by one unit.


1. Observe the formulas of the three ions: PO₄³⁻, HPO₄²⁻, and H₂PO₄⁻.
2. Notice that hydrogen atoms are added successively: 0, 1, and 2.
3. Observe the charges of the ions: -3, -2, and -1.
4. Recognize the pattern: adding hydrogen atoms reduces the negative charge by one unit.

In other instances where hydrogen is added to polyatomic ions, a similar pattern occurs. The negative charge decreases as more hydrogen atoms are added. This pattern is consistent across various polyatomic ions containing hydrogen.

To know more about polyatomic ions click on below link:

https://brainly.com/question/12852496#

#SPJ11

To solve this problem, we need to use the principle of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed. First, we need to find the initial mass of the marshmallow and food holder, which is 5.08 g. Then, after burning the marshmallow, the new mass of the marshmallow and food holder is 5.00 g.

To determine the mass of food burned, we need to subtract the new mass from the initial mass:
5.08 g - 5.00 g = 0.08 g
Therefore, the mass of food burned is 0.08 g.

It's important to note that we cannot determine the mass of the marshmallow that was burned specifically, as we do not have that information. However, we can determine the total mass of food burned.

In general, it's important to be aware of the principle of conservation of mass in all types of chemical reactions and food preparation. While we may not always measure or track the exact amounts of ingredients we use, understanding how mass is conserved can help us better understand and control the outcomes of our cooking and baking.

To know more about conservation of mass refer here

https://brainly.com/question/13383562#

#SPJ11

4666.7 m of sulphur dioxide are formed when 12.5g of iron sulphide ore (pyrite) reacts with oxygen according to the equation at stp.

According to given data,   12.5 g of iron sulphide ore (Pyrite ) reacts with oxygen according to the equation at STP.

We have to find the volume of sulphur dioxide

Mass of iron sulphide = 12.5 g

molar mass of iron sulphide = 120 g/mol

so number of moles of iron sulphide = 12.5/120 = 0.104167 mol

chemical equation of reaction of iron sulphide with oxygen is given as

4FeS₂ + 11O₂ ⇒2Fe₂O₃ + 8SO₂

here  4 mol of FeS₂ gives 8 mole of sulphur dioxide.

⇒1 mol of FeS₂ = 8/4 mol = 2 mol of sulphur dioxide.

⇒0.104167 of FeS₂ = 2 × 0.104167 = 0.208334 mol of Sulphur dioxide.

at STP 1 mol = 22.4 L

so the mass of sulphur dioxide

= 0.208334 × 22.4 L

= 4.6666816 L

= 4666.6816 ml

≈ 4666.7 ml

Therefore the volume of sulphur dioxide is 4666.7 ml.

To know more about iron sulfide here

https://brainly.com/question/31372347

#SPJ4

Atomic mass unit (amu) is used to describe atomic mass, with the symbols "u" or "Da" used to represent it. Carbon-12 was used as the reference element to define the atomic mass unit. A spectrometer can be used to determine the elements found in an unknown substance.

The molar enthalpy of combustion of methane in the gas phase is approximately -1360 kJ/mol, which is closest to -297 kJ/mol. The correct option is B.

To determine the molar enthalpy of combustion of methane, we need to use the bond enthalpies provided to calculate the energy released when the bonds in methane are broken and new bonds are formed in the combustion reaction.

The balanced chemical equation for the combustion of methane is:

CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)

Breaking the bonds in methane requires energy while forming the new bonds in carbon dioxide and water releases energy. The molar enthalpy of combustion is the net energy released per mole of methane combusted.

Using the bond enthalpies given, we can calculate the energy required to break the bonds in methane:

4C-H bonds x 413 kJ/mol = 1652 kJ/mol
1C-C bond x 347 kJ/mol = 347 kJ/mol

Total energy required to break bonds in methane = 1652 kJ/mol + 347 kJ/mol = 1999 kJ/mol

Next, we can calculate the energy released by forming the new bonds in carbon dioxide and water:

2C=O bonds x 745 kJ/mol = 1490 kJ/mol
4O-H bonds x 467 kJ/mol = 1868 kJ/mol

Total energy released by forming new bonds = 1490 kJ/mol + 1868 kJ/mol = 3358 kJ/mol

The net energy released in the combustion of methane is the energy released by forming new bonds minus the energy required to break the old bonds:

Net energy released = 3358 kJ/mol - 1999 kJ/mol = 1359 kJ/mol

to know more about combustion reaction refer here:

https://brainly.com/question/30566775#

#SPJ11